Job Description & Requirements

• Minimum Degree in Mechatronics/Computer Science or Equivalent.
• 5 years’ of experience in programming on Windows
• Proficiency with C++, VC++, MFC, SQL and OOP.
• Must have experience in Semi Equipment SECS/GEM Protocol
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.

Key Responsibilities:

• Design and develop machine control software for automated semiconductor equipment.
• Integrate Software or OEM Equipment
• Conduct Analysis, recommend changes to improve equipment performance
• Develop Control Software
• Provide Support for on-site installation

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Title: Site Supervisor

Location: Singapore

Salary Range: $3000 - $3500 (based on experience)

Job Overview:

By Design is looking for a committed and skilled Site Supervisor to manage renovation projects, ensuring smooth execution, safety, and high-quality standards across all job sites. The successful candidate will act as the key link between the interior design team, contractors, and clients.

Responsibilities:

- Conduct daily site inspections to ensure safe work practices and proper job execution.

- Manage project documentation, schedules, timelines, and budgets.

- Communicate effectively with the design team, contractors (Mandarin-speaking), and clients.

- Handle incident investigations and recommend solutions.

- Assist with ad hoc assignments as needed.

Skills & Requirements:

- Preferred to have own vehicle for site visits.

- Proven experience in interior renovation and site supervision.

- Strong organizational and time management skills.

- Fluent in English and Mandarin to liaise with Mandarin-speaking contractors.

- No specific educational background required; experience is prioritized.

Job Scope:

• Design, develop and propose suitable machine vision system based on
  project requirements
• Initiative and proactively communicate well with customers, project
  managers and cross-department project team
• Perform software programming, UI design, and software performance
  optimization on the vision platform
• Numerous data analysis skills, but not limited to Minitab, Excel and SQL
• Travelled to customer’s site to perform setup, training, and support machine buyoff

Job Requirements

• Min Diploma in Electrical/Mechanical/Mechatronics/Electronics/Automation Control Engineer
• Experience from a company that is doing the customised Machine Design

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Title: Interior Design Drafter

Reports To: Senior Designer / Design Manager

Job Overview:

The Interior Design Drafter is responsible for creating accurate technical drawings and plans based on the specifications provided by interior designers and project managers. This role involves translating design concepts into precise CAD drawings, ensuring all plans comply with local building codes and project requirements.

Key Responsibilities:

1. Drafting and Design

• Prepare detailed technical drawings, floor plans, elevations, sections, and 3D models as needed.

• Collaborate with designers to convert concepts into functional layouts.

• Develop joinery and furniture design details with accurate specifications.

2. Coordination

• Coordinate with project teams, architects, contractors, and suppliers to ensure accuracy and feasibility of designs.

• Revise drawings based on feedback and changes to project requirements.

3. Compliance and Standards

• Ensure drawings meet building codes, safety regulations, and company standards.

• Maintain a high standard of accuracy in all technical drawings.

4. Documentation

• Organize and maintain drawing archives for easy retrieval and reference.

• Assist in preparing design presentations with accurate visual documentation.

5. Project Support

• Assist in material selection and creating mood boards if required.

• Visit project sites for measurements, design clarifications, and progress updates.

Qualifications and Skills:

• Diploma or degree in Interior Design, Architecture, or related field.

• Proficiency in drafting software such as AutoCAD, SketchUp, Revit, and other relevant tools.

• Strong understanding of interior design principles and space planning.

• Ability to interpret design concepts and translate them into technical drawings.

• Attention to detail with excellent organizational skills.

• Knowledge of building codes, safety standards, and materials.

• Good communication and teamwork abilities.

Preferred Experience:

• 1-3 years of experience in interior design drafting or a similar role.

• Familiarity with 3D rendering software like 3ds Max , lumion, I- structure etc

A world in crisis and needs a different kind of thinking. At Whiby Wood Mills, we fuse design, engineering, and a systems philosophy to push the boundaries of what is possible. We fully embrace the changing landscape of digital tools, R&D and dynamic workflows to unlock new high value sustainable results.

You will join as an Intern, and your key contributions will be:

• Helping to deliver transdisciplinary, holistic design for high-profile international projects.
• Supporting the team in delivering design solutions.
• Contributing to the preparation of design solutions, presentations, and reports.
• Assisting with 3D modelling for analytical or geometrical models (Etabs and Rhino).
• Assisting the team with design tasks on various projects.
• Contributing to benchmarking aspects of building design.

What we look for:

• Positive attitude and eagerness to learn.
• Commitment to the team and the work.
• Interest in computational design and programming.
• Undergrad in Engineering, Architecture, Architecture and Sustainable Design, Computer Science, etc

What we offer:

• A dynamic, fast-growing environment.
• Exposure to international projects.
• Collaborations with worldwide leading architects.
• An excellent environment for professional growth.

THE ROLE:

As a member of the SoC Physical Integration team, you'll interface with various engineering groups, including architecture, design, CAD, software, and product engineering, across various geographies to work towards the physical/electrical verification and tape out of AMD SoC FPGA/ACAP devices. Common essential duties and responsibilities include, but are not limited to:

• Defining and developing flows and methodologies for chip level integration
• Developing tools for design verification or efficiency
• Designing (RTL and custom), verifying, and integrating FPGA/ACAP sub-blocks
• Coordinating activities between different design groups to ensure smooth integration
• Executing chip level physical verification
• Executing chip level electrical verification

PREFERRED EXPERIENCE:

• Basic understanding of FPGA architecture
• Knowledge of and/or experience with design and verification tools such as Virtuoso and Calibre
• Knowledge of and/or experience with P&R tools
• Fundamental circuit design knowledge including simulation experience with Spice and Verilog
• Strong debug skills
• Scripting experience using Perl, Python, TCL, C-shell, Make and/or other scripting languages
• Knowledge and experience with basic Unix data management and job control
• Excellent written and oral communication skills

ACADEMIC CREDENTIALS:

• BS with 2+ years of exp or MS in Electrical Engineering, Computer Engineering or related equivalent

LOCATION:
Singapore

Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples,
• mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement
• management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without
• deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such
• as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of
• works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and
• implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to
• achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 6 years of local working experience OR
• Diploma in Architecture with minimum 8 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

Job Scope :

- 2D drafting and other documentation.

- Assists Senior Engineer on the following :

• Technical assignments involving basic or applied research or the design and development of hardware products that includes CIP, upgrades, End Of Life (EOL).
• Includes design and evaluation of mechanical and/or electromechanical devices, components or systems.
• Develop, test and document designs for the transport mechanisms, vacuum systems and various process stations, including deposition chambers, substrate heating, cooling, cleaning, etc.

- Participate in the overall detailed product design.

- Participate in design review by providing mechanical design inputs relating to DFM and DFA, etc.

- Prepare and release 3D Solid Models and Engineering drawing while communicating to local vendors to expedite delivery of design parts and assemblies.

- Performs other related duties as assigned..

Requirements:

- Nitec / Diploma in Engineering or equivalent

- 2 – 3 years of relevant experience

- Proficient user of Solidworks

- Knowledge of Orcad

- Experience in Machine Design and familiarity in Design Processes

- Knowledge of ECO release of Engineering quality documentation

- Experience in dynamic electro-mechanical system design and high vacuum design will be an advantage

We are looking for a creative, resourceful Mechanical Design Engineer to join us. The Mechanical Design Engineer is responsible for conceptual / detailed design and will have the opportunity to participate in prototyping, installation, testing and verification of their design. This role requires good technical writing skills to produce documentation for submission to Customers and Clients. The Mechanical Design Engineer will work with a multi-disciplinary team and exposed to interactions with customers, partners, vendors, and sub-contractors.

Job Requirement:

• Master/Bachelor Degree or Diploma in Mechanical/Mechatronic Engineering
• Well-versed with Solidworks and AutoCAD
• Well-versed with Microsoft Word and Excel
• Able to travel overseas when required
• Minimum 2 years of mechanical design or product development experience
• Good technical writing skill
• Basic knowledge of GD&T and manufacturing processes

Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples,
• mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement
• management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without
• deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such
• as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of
• works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and
• implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to
• achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 4 years of local working experience OR
• Diploma in Architecture with minimum 5 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

We are looking for an experienced, energetic and creative individual to join our dynamic advertising agency.

Art Director (Print)
(Singapore)

Responsibilities:

· Able to lead the print team and oversee development of work for consumer/corporate client campaigns and projects

· Strong in conceptualising and proposing innovative print ideas (ATL/BTL/TTL)

· Oversee the day-to-day work of the design team and provide art direction guidance

· Able to work on several projects simultaneously

Requirements:

· Bachelor of Arts In Graphic Design, Fine Arts or equivalent from an accredited art/design school or university

· Excellent interpersonal and presentation skills

· Min. of 3 years professional experience as an Art Director in print, web and design creative

· Outstanding portfolio with Regional/Local clients

· Must be proficient in all the Design software – Photoshop, Illustrator, InDesign, Freehand, Flash

· Sound knowledge in production processes

Benefits:

- Medical & Hospitalisation Coverage;

- Smart Casual Work Attire;

- Confirmed staff get an additional day off monthly (on top of Annual Leave)

Interested applicants please send us your CV, expected remuneration and a softcopy of your portfolio to [email protected]

Only shortlisted candidates will be notified.

Job Description

2nd Edition Pte Ltd is looking for full-time Interior Design Drafter. An ideal candidate would have at least 5 years of experience, with good skill in producing drawing and sketching; proficiency in using different types of software. The candidate would be highly driven and dedicated with excellent communication skills and great attention to detail. To be successful in the role, the candidate should possess a team-oriented personality and at the same time, be able to work independently.

Job Responsibilities

• To produce detailed drawings and space planning using Autocad
• Liaise with designers concerning interior design layouts and drawings standards/details.
• Identifying and communicating potential problems to the team.

Job Requirements

• Candidate must possess a Diploma or above in Interior Design / Architecture or equivalent
• Proficiency in software (AutoCAD, Sketch-up, PowerPoint, photoshop etc)
• At least 5 years of relevant experience
• A proactive and conscientious team player
• Able to work independently with responsibility

Physical Design Engineer

Experience : 5+ Years

Salary Range :SGD 7000-10000

Skills & Technical Expertise Required:

Netlist to GDSII at block level, Subsystem Level and at Full chip.

Worked on multiple tapeouts on Netlist to GDSII

Hierarchical partitioning and budgeting of block-level subsystems.

Implementation of high performance (HP) cores, low power designs

Node experience upto 3nm,7nm, 10nm, 14nm, 28nm.

Timing Signoff in loop through STA and ECO cycle at block and at interface.

Block level floor planning, power planning and IR drop analysis.

Scan chain reordering / Scan Chain repartitioning

CTS expertise and clock tree constraints creation for meeting specifications

MMMC optimization at Block and Sub-System Level

Timing closure with Crosstalk and AOCV / POCV

TCL scripting to fundamentally understand tool usage.

Mandatory EDA Skills

PnR tools such as Synopsys ICC/ICC2 and/or Cadence Innovus

1. Design and manufacturing of Mooring Winch, Towing Winch, Anchor Handling Winch, Linear Winch, Anchor Windlass, Marine Crane systems, anchor pipe system, post trenching equipment and other related marine equipment.

2. Carry out calculation work on T.C Marine and Offshore Equipment.

3. Conduct checks on the required marine classification standards for T.C Marine and Offshore Equipment.

4. Carry out the study and understanding of client’s technical specifications.

5. Carry out the project management and supervision of the Engineering process for the manufacturing and design of T.C products.

6. Ensure successful delivery of the completed products to client.

7. Resolve all technical problems arise from client during commissioning.

Job Scope :

- Assume responsibility for technical assignments involving basic or applied research or the design and development of Electrical hardware products. Includes design, fabrication, modification and evaluation of electromechanical devices, components or systems.

- Devise initial concept of assigned device, component or system and participate in the overall detailed Electrical perspective of product design.

- Creates original hardware, circuits, components, software, processes, and models to prove the feasibility of the design approach being investigated. Inclusive of Electronics and PCBA

- Participate in design review by providing inputs relating to DFM and DFA, etc.

- Prepare and release Engineering drawings/schematics while communicating to local vendors to expedite delivery of design parts and assemblies.

- ECO release of engineering documentation.

- Design of AC/DC power distribution systems including selection of circuit breakers, power supplies, contactors and cabling harnesses. Knowledge of PCBA Design, component selection and trouble shooting.

- Develop, test and document designs

- Develops estimates for products and projects. Power consumption, weight, size and schedule.

- Coordinates with manufacturing during pilot run and first production runs to ensure efficient transition from engineering into production.

- Interface effectively with customer to understand technical requirements and propose quality solutions.

- Possesses good electrical troubleshooting skills, and is able to troubleshoot at customer sites.

- Interfaces effectively with other organization such as Purchasing, Marketing, Service, and Quality Assurance as needed to carry out responsibilities

- Assists engineering management in developing schedules and specifications for new and legacy products.

- Maintains a high level of technical competence and state-of-the-art awareness.

- Directs engineering and technical support personnel as required.

- Maintains a high level of technical competence and state-of-the-art awareness.

- Performs other related duties as assigned.

Requirements:

- Degree / Masters in Engineering or requivalent

- 3 – 5 years of relevant experience

- Must possess relevant experience in Semicon Equipment Build

- Good working knowledge of electrical systems including motion, temperature measurement, PID loops, and safety interlock circuits.

- Experience working on dynamic electromechanical system design

- Proficient user of orcad, autocad, pcad, Solidworks or similar 3D CAD Software

- Design knowledge on NFPA, Semi Safety Requirements, and Machine safety.

- Good communication and interpersonal skills.

- Good command of written and verbal English

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, Design Verification

Responsibilities:

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.

• Develop test plans at block, sub-system, and chip level.

• Execute SoC-based verification at full-chip.

• Write C-based lib packages and tests.

• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.

• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.

• Automating the test environment for randomized testing and scoreboarding.

• Utilize advanced debugging techniques to identify and resolve design and verification issues.

• Perform root-cause analysis and work with design teams to fix identified issues

• Define and track functional and code coverage metrics to ensure thorough verification.

• Ensure that verification quality meets or exceeds industry standards and project requirements.

• Edge-based AI inference is preferred.

Requirements

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification

• Should have delivered multiple chips functioning to Specification.

• Identify and manage verification deliverables, milestones, and schedules.

• Proactively identify potential verification risks and develop mitigation strategies.

• Collaborate with design, architecture, and software teams to understand and verify design intent.

• Communicate verification progress, issues, and results to stakeholders and management.

• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges

• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.

• C-based verification in an SoC environment is required

• Experience with ARM processor-based designs and low-power design techniques is a plus.

• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile

• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5

• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

About the team:

MediaTek’s Physical design team is responsible to implement top quality digital backend design for our advanced process chips which have billions of transistors. Passionate talent who are eager to join this fast-growing IC design industry and grow together with our passionate team are welcome to apply!

Job Description

• Working on 6nm and below advanced process project APR and Timing/PI sign-off
• Take the TOP and PM role for the complicated hierarchical chip (more than 20M inst plus 500+ macros)
• Take the Block or Block coordinator role for complex blocks
• Do early prediction for critical APR/Timing/PI issues

Job Requirements

• APR/Timing/PI hands-on/tapeout experience on complicated hierarchical chip
• TCL/Perl/Python/C/C++ programming skill
• Have advanced process(n6 or below) experience is a plus
• Excellent communication and team work spirit

Location: One North, Singapore

Important Note: This advertisement is meant to source suitable candidates for future openings for this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, RTL Design

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 5-8 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• We are a chip design service company invested by an international consortium and founded by a senior chip design technical team.
• The company is headquartered in Singapore and will take root in Singapore for long-term development.
• The company has strong R&D capabilities and its core technical team members all have more than 10 years of experience in chip design.
• We have rich industry experience and deep practical accumulation in ASIC design and business management.

Our office is located in one North and walking distance from MRT.

We Provide competitive salary and compensation package for the right candidate. We are work-life balance and friendly to employees with various benefit.

Job Description：

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 5 years of work experience in the digital backend design field. Hands-on project experience is required. Tapeout experience at advanced technology is prefered. ( for excellect junior candidates with 3+ years experience will be considerated )

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.

4. Strong communication ability, good confidence and self-movitation.

5. Bilingual and with good teamwork spirit.

6. Salary is negotiable for excellent candidates.

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

RTL Lead Engineer

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 10-12 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114