Roles & Responsibilities

1. Applicant must at least has 1 year or more of stage performing

2. Recruit performing artiste and singers when needed

3. Participate in all stage performances

4. Assist Operation Manager to train & guide the stage crew to improve on their performances

5. In charge to schedule and selection of performing artiste for specfic event's performances

6. Coordinate & attend all training & rehearsal

7. Source for necessary accessories and props for all performances.

8. Singing & Dancing skill

9. To ensure all stage crew is presentable on stage

Roles & Responsibilities

Driver - Responsibilities

The work scope for the above job title is as but not limited to the following:

1 The main task of the Driver is to drive the Company lorry to pick up workers, to or from site, office and dormitory etc.

1.1 The Driver must drive the vehicles to the required work sites punctually.

1.2 The Driver must follow the schedule or ad-hoc obtained from the Supervisors and Co-ordinator. The Driver must inform the parties involved if there are any clashes in schedule before proceeding.

1.3 The Driver must inform the Supervisors and Co-ordinator as soon as possible if he is delayed in his schedule. This will enable them to plan their resources efficiently.

1.4 Aside from driving the workers to site, rest of the time will be to support office courier needs.

2 Usage of Company vehicles

2.1 The Driver is to switch off the ignition completely and remove the key when the vehicle is parked and not in use. The Driver must not leave the vehicle in idle mode while waiting.

2.2 The Driver must understand that the Company’s vehicles and attached cash cards are solely to be for Company use. Otherwise, costs will not be reimbursed.

3 Safety

3.1 The Driver must drive and operate the vehicles in a safe manner in accordance to local laws.

3.2 If there are loads on the vehicles, the Driver must ensure the loads are properly secured in accordance with local laws and regulations.

3.3 The Driver must inform the Director or PIC immediately that he is involved in an accident while driving or operating the vehicle. This includes causing damage to third party property.

3.4 The Driver should understand that if the accident is caused by the Driver’s negligence, the Company is entitled to pursue part or all of the claims from him.

3.5 The Driver should also understand if he incurs any traffic offences due to his own negligence, the Company is entitled to pursue part or all of the claims from him.

4 Servicing and Maintenance

4.1 The Driver is to inform the Company if any of the vehicles are unsafe to operate and require repairs. The Driver must not operate the vehicles in such situation.

4.2 The Driver will drive the vehicle to the Company appointed workshop for servicing and maintenance. The Driver will also pick up the vehicle when servicing and maintenance is completed.

4.3 The Driver will drive the vehicles to Inspection Centres as required.

The above is an overview of the work scope and responsibilities of a Driver employed by the Company. It is by no means an exhaustive list. There may be other scope and responsibilities deemed normal by the industry which by default will be included in this Appendix.

Schedule:

Day shift: 5.5 days per week

Requirement:

1. Minimum Class 3 Singapore Driver's license

2. Familiar with the marine industry procedures

3. Good driving track record

4. Familiarity with Singapore roads and ERP time

5. This job may require some late work. OT allowance will be given.

6. Fit and in good health

• 5.5 Alt Sat
• Office located - Kranji

Job Descriptions:

• Lead a team of Quantity Surveyors in managing procurement and contract administration
• Review contract documents and provide cost estimates for tenders
• Prepare and monitor project budgets and cash flow, adjusting projections as needed
• Manage contract progress claims, subcontract payments, and variation claims
• Resolve contract disputes and assess claims for extensions of time and additional costs
• Independently lead and manage large-scale projects
• Maintain records of contract-related correspondence and documentation

Requirement:

• Degree in Quantity Surveying / Construction Management / Civil Engineering or related fields
• Minimum 5 years relevant experience in contract negotiation, administration and/or management

Kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

EA Reg. No: R1880058 | Dylan

EA License No: 15C7752

Job Descriptions:

• Perform inbound receipts / checking and other related activities.
• Perform picking, packing and outbound activities for both local and export shipments.
• Handle loading & unloading, stacking, put away, labelling and packing of goods.
• Ensure compliance of warehouse Standard Operating Procedures and safety guidelines.
• Perform stock-take and cycle count whenever required.
• To keep the warehouse clean and tidy at all time.
• Perform other related warehousing duties or Ad-hoc job assigned by Superior.

Job Requirements:

• Possess a valid Forklift driving license has an added advantage.
• Literate in basic computer skills has added advantage.

Benefits:

• Daily Lunch Provided
• Company Transport Provided at designated MRT stations (Lakeside,Boon Lay & Woodlands)
• Medical and Dental benefits
• Attractive Bonus Scheme (AWS, Special Bonus etc.)

• Liaison with ship owners, vendors as well as departments on project requirements and costs.

• Estimation and Projection of Shipbuilding, Upgrading, Repair and Conversion Cost

• Negotiate and coordinate with all parties on project schedule

• Assist to manage and lead commercial team including development, training, performance management and succession planning

• Resolving contractual and commercial problems and to report to the management regularly

• Manage internal relationships with operations, commercial, Sales and Marketing to ensure optimal performance and to provide commercial requirements for projects and sales activities.

• Interpreting financial, operational, commercial or customer insights to ensure a commercial/billing issue is fully understood and that hard hitting action are taken and constantly reviewed

• Developing, reviewing and optimizing commercial strategies against key competitors

• Work with the Sales team to target specific ‘high value’ customers and ensuring the business is maximizing revenue

• Extensive experience in the required field

• Proven ability to perform a variety of tasks, often changing assignments on short notice.

• Proven ability to prioritize and complete work assignments by specific deadlines.

1. Administrative Support

• Manage day-to-day administrative tasks, including filing, data entry, and document preparation.
• Assist in drafting and proofreading correspondence, reports, and official documents.
• Maintain and organize office records, ensuring confidentiality and accuracy.

2. Scheduling and Coordination

• Coordinate and schedule events for the Director.
• Manage calendars and ensure timely communication of schedules to relevant parties.
• Arrange travel and accommodation for Director, as needed.

3. Communication Management

• Serve as the primary point of contact for incoming calls, emails, and inquiries.
• Draft, distribute, and follow up on internal and external communications.
• Liaise with vendors, clients, and other stakeholders to ensure smooth operations.

4. Office Management

• Monitor office supplies and place orders to maintain adequate stock levels.
• Ensure the office environment is organized, clean, and conducive to productivity.
• Oversee office equipment maintenance and troubleshoot minor issues.

5. Data and Records Management

• Maintain accurate and up-to-date databases and filing systems.
• Handle sensitive and confidential information with discretion.
• Compile, organize, and analyze data for management review when necessary.

6. Operational Support

• Provide support for projects, including research, coordination, and execution of tasks.
• Assist in tracking deadlines, deliverables, and progress on key initiatives.
• Manage special assignments or ad-hoc duties as assigned by management.

7. Policy and Procedure Compliance

• Ensure that administrative practices align with company policies and procedures.
• Assist in the development and implementation of office policies.

8. Team Collaboration

• Work closely with team members to ensure effective communication and coordination.

Key Competencies and Skills:

• Strong organizational and multitasking abilities.
• Proficiency in office software, such as Microsoft Office Suite and other relevant tools.
• Excellent communication skills, both written and verbal.
• High level of attention to detail and accuracy.
• Ability to handle sensitive information with confidentiality.
• Problem-solving and proactive thinking.

Reporting to: Clinic Manger
Working Hours: Mon - Fri 9am - 6pm

JOB RESPONSIBILITY

• Find tender opportunities GeBIZE.

• Prepare Tender and submission.

• Familiar with reinstatement and maintenance work.

• Review and analysis of Tenders Drawings & Documentation.

• Preparing Tender submissions and reviewing Procurement & Reviewing of Contracts, and ensuring compliance.

• Reviewing and commercial management of all projects, to ensure accurate and reliable reporting.

• Review all incoming correspondence from Clients, Consultants & Design Team to identify contractually critical items and to initiate replies.

• Estimating a range of projects in a variety of sectors.

• Improve and implement best practice commercial processes and accurate budgeting.

• Maintain accurate records and provide necessary detailed backup to support commercial tracking and costing.

• On Site measurement of Electrical Services.

• Preparation of specialist sub-contract work packages.

• Preparing monthly Commercial Progress reports.

• Other ad-hoc duties assigned by Construction Manager.

Job Description & Requirements

• Diploma/Degree holders with relevant certificates and experience.
• Preferably with Shipyard/Marine/Oil & Gas experience & knowledge
• Team player with excellent interpersonal and communication skills

Responsibilities

• Performing administrative duties
• Arrange project works
• Managing records of projects policies and procedures
• Preparing quotations and service reports
• Creating documents, files, spreadsheets and databases for each projects
• Arranging for the delivery of tools/materials to project sites.

• Preparing reports: Accounting assistants prepare financial statements, budgets, and other reports.
• Bank reconciliations: Accounts assistants reconcile accounts and expenditures.
• Handling communication with clients: Accounting assistants communicate with clients and vendors about billing and payments. They follow up on money owed and answer questions about bills.
• Payroll: Accounting assistants track hours, calculate deductions, and manage funds withheld for taxes.
• Processing invoices and payments: Accounting assistants prepare and process invoices and payments.
• Assisting in audits: Accounting assistants may assist with audits.
• Maintaining financial records: Accounting assistants maintain financial records and update procedural documentation.
• Working with spreadsheets: Accounting assistants work with spreadsheets, sales and purchase ledgers, and journals.
• Recording and filing cash transactions: Accounting assistants record and file cash transactions.
• Controlling credit and chasing debt: Accounting assistants control credit and chase debt.
• Liaising with third party providers, clients, and suppliers: Accounting assistants liaise with third party
• Handle partial sets of accounts, including Accounts Payable (AP) and Accounts Receivable (AR).
• Ensure timely recording of creditor invoices and payment transactions and follow up with billings and cheque collections.
• Input daily and monthly sales reports.
• Accounting Assiatant need to submit CPF constributions.
• Retrieve and resend invoices, credit notes, and statements of accounts.
• Participate in cash flow calculations and preparation.
• Accounting Assiatant need to follow up company auditor.
• Perform weekly and monthly bank reconciliations.
• Provide administrative support as required.
• Accounting Assiatant assist prepare GST fillings and records.
• Maintain Project Quotation, PO, WO, LOA Signed documents.
• providers, clients, and suppliers.
• Suppliers Agreements prepare and keep records
• Accounting Assistant need to prepare Monthly Invoice for Suppliers
• Maintain Workers Loan List
• OED Survey Need to submit.
• Accounting Assistant need to handle Small Claims Follow-Up Details.
• Checking and responding to emails on daily basis to get updated on the work
• Being consistent, accurate, and great in minimizing errors
• Support audit and tax queries
• Liaise with banks on banking transactions

Job Duties:

• Assist with the Reception desk as required and other associated tasks, including directing incoming calls and visitor arrival/departure
• Using the in-house database and other systems effectively to ensure maximum efficiency
• Ability to work flexibly in a busy environment with an established team and processes
• Organising couriers
• Maintain filing system
• Prepare mail
• Arrange correspondence for overseas deliveries

Job Requirements:

• Relevant experience within an office environment would be advantageous
• Highly motivated and organized individual with a flexible approach to work
• Detail-oriented and ability to work independently
• Ability to work well under pressure and meet tight deadlines without compromising the quality of work or safety
• Able to work on Saturdays as of when required

1. Duty & Responsibilities

• Implement and provide directions in project planning, coordinate works, liaise with sub con/supplier, ensures overall progresses based on schedules.
• Effectively communicate project expectations to team members and stakeholders.
• Coordinate with the drafting department with regards to the preparation/ submission/ approval of shop and as-built drawings.
• Liaise with client's representatives with regards to all site matters, attend site meeting if required.
• Update Project Status, prepare monthly progress claim for the project.
• Develop best practices and tools for project execution and management.
• Performed Ad-hoc duties assigned.

2. Requirement

• Min. 8 years and above for Electrical & Network Telecommunication Project Management experience required.
• Bachelor/ Master Degree in Electrical/ Electrical Communication Engineering or relevant field.
• Proven experience in leading build projects from initiation to project closure
• PMP certification from PMI or equivalent is an advantage.

THIS IS A 2-YEAR CONTRACT ROLE

Job Overview

We are seeking a proactive and experienced ERP Manager to oversee the implementation and optimization of a new Enterprise Resource Planning (ERP) system, Microsoft Business Central, in the Finance department. This role involves coordinating with internal stakeholders and external vendors to ensure a seamless deployment while supporting the Finance team with ongoing ERP management and day-to-day workload distribution.

The ERP Manager will work closely with the Finance Director and two existing executives to enhance operational efficiency, streamline workflows, and ensure the ERP system meets organizational needs. This is a 2-year contract position with the potential for extension based on project requirements.

Key Responsibilities

ERP Implementation and Management

1. Lead the end-to-end ERP implementation process, including planning, testing, deployment, and post-go-live support.
2. Collaborate with external implementation partners and vendors to ensure deliverables meet timelines and quality standards.
3. Coordinate data migration, integration with existing systems and government’s InvoiceNow, and configuration of ERP modules (Financial Management, Reporting, budget, etc.).
4. Manage project milestones, risks, and resources to deliver on time and within budget.

Operational Support and Training

1. Provide day-to-day support for ERP-related tasks, including troubleshooting, user access management, and resolving system issues.
2. Develop training programs and documentation to empower the Finance team to use the ERP system effectively.
3. Act as the primary point of contact for vendor support and maintenance.

Collaboration and Optimization

1. Identify and implement process improvements within the Finance department, leveraging the ERP system to enhance efficiency.
2. Work with the Finance team to balance workload and address operational bottlenecks.
3. Provide regular updates to the Finance Director on project progress, challenges, and key decisions.

Key Requirements

Qualifications

• Bachelor's degree in Finance, Accounting, Business Administration, Information Systems, or related fields.
• Professional certification in ERP systems, project management (e.g., PMP), or finance (e.g., ACCA, CPA) is a plus.

Experience

• At least 5 years of experience in ERP system implementation and management, preferably with Microsoft Business Central or similar platforms (e.g., NetSuite, SAP).
• Proven track record of managing cross-functional ERP projects in mid-sized organizations.
• Experience working in Finance or with Finance teams is highly desirable.

Skills

• Strong understanding of financial processes, reporting, and compliance requirements.
• Excellent project management, communication, and stakeholder management skills.
• Ability to work collaboratively in a dynamic and resource-constrained environment.
• Proficient in Microsoft apps like Power BI, Copilot and Power Automate.
• Analytical mindset with problem-solving skills to address complex issues.

1. Duty & Responsibilities

• Implement and provide directions in project planning, coordinate works, liaise with sub con/supplier, ensures overall progresses based on schedules.
• Effectively communicate project expectations to team members and stakeholders.
• Coordinate with the drafting department with regards to the preparation/ submission/ approval of shop and as-built drawings.
• Liaise with client's representatives with regards to all site matters, attend site meeting if required.
• Update Project Status, prepare monthly progress claim for the project.
• Develop best practices and tools for project execution and management.
• Performed Ad-hoc duties assigned.

2. Requirement

• Min. 5 years and above for Electrical & Network Telecommunication Project Management experience required.
• Bachelor/ Master Degree in Electrical/ Electrical Communication Engineering or relevant field.
• Proven experience in leading build projects from initiation to project closure
• PMP certification from PMI or equivalent is an advantage.

At Leica Microsystems, we have been shaping the future for over 175 years with groundbreaking optical and digital solutions. With a culture rooted in customer focus, innovation, and teamwork, we lead the market in microscopy, imaging, and analysis, unveiling the invisible and empowering our customers to build a better, healthier world.

Joining Leica Microsystems means contributing to scientific discoveries and supporting surgeons in making critical decisions. Our advanced microscopes and AI-based image analysis solutions enable users to gain profound insights into development and engineering challenges. Here, you will work on meaningful projects alongside passionate colleagues, driving progress and pushing the boundaries of what’s possible.

Learn about the Danaher Business System which makes everything possible.

The Business Development Manager (TH, MY, ID) is responsible for closely monitoring market trends and competitors' dynamics, promptly adjusting business strategies to adapt to changes, and developing innovative marketing plans to expand the company's influence and market share.

This position reports to the Head of Sales, Microscopy and is part of the Microscopy Sales Team located in the SEA Region and will be working remotely to cover Thailand, Malaysia and Indonesia region.

In this role, you will have the opportunity to:

• Revenue and Strategy Management: Oversee the revenue generation for the assigned division and region by formulating and executing business development plans and division strategies. This includes pricing and discounting responsibilities and ensuring compliance with regulatory, international, and company EHS requirements.
• Product and Marketing Management: Manage product and marketing activities for the assigned divisions by developing and rolling out training programs, creating price/performance maps, identifying product gaps, and providing recommendations for improvement. Build and maintain a regional customer database for the market segment.
• Sales Support and Tools: Provide essential sales and marketing tools to improve the win rate for sales and service teams. This includes product and application support, ensuring the right level of know-how at POI, and managing demos, workshops, and application support.
• Market Intelligence and Business Planning: Continuously monitor market trends and competitors' dynamics, adjusting business strategies accordingly. Provide VOC, EPS, forecasts, and PSI to factory and operations. Identify business plans for current and potential tender opportunities, focusing on expanding the company's market influence and share.
• Key Account Management: Collaborate with the sales team to drive sales initiatives and manage key accounts. Develop and implement short and long-term operational plans for key accounts, ensuring the effective onboarding of new clients and the growth and development of existing ones. Act as the key interface between customers and relevant divisions, making regular visits to gather market information and relay it to management. Responsible for the development and achievement of sales through the direct sales channel.

The essential requirements of the job include:

• Degree in Life Science or related fields
• Min 8 years of relevant product marketing experience in Life Science Research/ Applied Industry
• Strong knowledge of products and distribution channels
• Previous experience in Account Management or Territory/Region Sales

Travel, Motor Vehicle Record & Physical/Environment Requirements:

• Ability to travel – 100% within Thailand, Malaysia and Indonesia region.

Leica Microsystems, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job.

Join our winning team today. Together, we’ll accelerate the real-life impact of tomorrow’s science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life.

For more information, visit www.danaher.com.

Responsibilities:

• Report to Project Director on project management, site management, and risk control to achieve project goals.
• Handle construction planning, scheduling, baseline programs, and coordinate with consultants, contractors, and suppliers.
• Monitor project schedules and report progress according to the baseline program.
• Assist PD in preparing project reports (e.g., monthly reports, VO management, EOT assessments).
• Liaise with clients, authorities, consultants, subcontractors, and suppliers on project matters, providing technical and non-technical solutions.
• Conduct technical reviews to ensure contractual compliance and timely completion.
• Support the Contracts Department with tenders, including drawings, method statements, proposals, and claims preparation.
• Attend meetings with clients, consultants, and contractors to ensure progress remains on schedule.
• Oversee quality control, safety, and EHS practices on-site, identifying high-risk activities and approving method statements.
• Undertake additional duties as assigned by management.

Requirements:

• Diploma and above in Civil Engineering or equivalents.
• Minimum of 5 years of relevant working experience.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Roles & Responsibilities

1) Business Development & Coordination with Business Development Department

· Identify the potential end users and know more about their work requirements. Communicate with the End users and get REI involved in the proposals.

· Implementation of new proposals to the End user based on the work constructability.

· Discuss with BDD on the new implementation of works if any that has been executed on site. Provide the details of work scope to BDD on the jobs carried out and to be executed.

· Providing input to the Business Development Team at required intervals. Involved in the preparation of presentation with the strategy.

· Standardize the Project Working slides on the REI EPC skills in terms of REI Works and develop the standardization forms/ norms for the Standalone REI skills.

2) Proposal Preparation and Coordination with Proposal Team

· Evaluation of the provided ITB documents and accordingly strategize the RFQ and the price schedule. Arrange one dedicated guy from the project team on the preparation of workflow and strategy on the execution in along with the necessary competent personnel lists.

· Liaise with the End Users on the proceedings of the tender which was been submitted.

· Co-ordinating with the end user for the tenders been submitted and getting the updates. Liaise with the tender team on the stated for further and clear execution of price schedule and proposals.

· Compare the strategy among the competitors for optimistic solutions and proposals.

· Prepare the submission strategy for the tenders for the clear identification and proceedings.

· Lead the technical proposal preparation inline to the End user requirement.

· Standardize the technical proposal documents on the PEP & PCP.

3) Engineering Management & Coordination with Engineering Department

· Review the EDCL schedule & date of deliverables against the planned dates. Organizing weekly meetings with engineering team per the project deliverable.

· Review the Engineering documents to ensure that there are no additional cost impacts & in case of cost impacts, raise the Variation Order Request.

· Review the Technical specifications & do the IDC (Inter Discipline Check) to ensure on the comprehensive technical proposals.

· Review the documents against the Singapore standards and specifications. Compare the Engineering deliverables against the ITB.

· Monitor the Engineers on the IDC comments on regular aspects.

4) Client Management & Coordination

· Lead the meeting with the Clients. Attending weekly meetings with different custodians.

· Monitor the Delay logs/ Project tracker on a due basis per the project schedule and clear the holding point among the team and highlight the path forward with the owner/ End user.

· Understanding the concerns from client and provide the path forward with immediate for the smooth operations

· Always maintain a good relationship with Client/ End user on quality and competent lists.

5) HSE Management and Coordination with Corporate HSE Department

· Participate in the Client Weekly HSE walk down and advise on the area of improvement if any to be addressed.

· Encourage the work force & middle management for the area of improvement in safety aspects.

· Monitor the HSE incident reporting and HSE safe working hours in regular aspects.

· Encourage the work force in the toolbox talk for the safe work execution.

· Communicate with the team clearly on the objective and ensure that the HSE corporate policy is well established.

· Provide the Inputs from the project site on the identified area of improvements.

6) Quality Management and Coordination with Corporate QA/QC Department

· Monitor the Rework strategy and ensure that the reports been submitted to the corporate team.

· Ensure 72 hours of training for all the project members and construction team.

· Review the quality of training provided and ensure a startup for the training of new installation works.

· Ensure to have the QHSE walk down and QHSE Campaign in project site and report to

the QHSE corporate team.

· Arrange and identify the relevant third-party training for the relevant personnel.

· Encourage the work force to involve/ attend the competent training lists per individual capability.

7) Procurement & Coordination with Procurement Department

· Attending weekly PCL meetings on the clear tracking and execution of materials to be delivered. Monitor the Procurement deliverables by allocating the Project expeditor for the Jobs involved.

· Involved in the technical discussions with vendor and analyzing the technical proposals for the proceedings.

· Pre-qualify the compete/ qualified vendors in the System for further proceedings in advance.

· Co-ordinate with the Client to get the approval for the in-house vendors. Propose alternate vendors in benefits to the company adherence and proposals.

· Involve In House Vendors on the EPC Jobs and get the In-house Vendors in the Client Approved Vendor lists.

· Co-ordinate with the Procurement team on the clear strategy of commercial negotiations.

· Ensure to clear the technical aspects in prior to issue the PO. Follow the communication matrix for the Bid Tab and commercial discussions with Vendor

8) Construction Planning & Execution & QS Management

· Co-ordinate with the client construction team on the work front availability and the further proceedings

· Lead the weekly Construction meetings & the Client meetings. Share the reports and analysis for the work done at site.

· Conduct internal meetings with the individual crew for the proper way of improvement at work site.

· Analysis the Smart construction progress on weekly basis.

· Monitor the S curve (planned against Actual) on weekly basis. Identify the area of improvements on the work progress and construction sequences.

· Monitor the project deliverables of individual projects through the tracker and assign the individual responsibilities to the team.

9) Training and Coordination with Corporate Training Department

· Verify the training hours for the individual working crew.

· Identify the relevant trainings to impose for the lead man and the other skilled workers.

· Attend corporate meetings with the QHSE team for the further improvement of training skills.

· Conduct the training on smart construction progress measurement to the work force.

· Provide necessary inputs to the corporate training department for the further

implementation of training procedures and methods.

10) Construction Equipment Monitoring

· Ensure that the necessary equipment used by the construction team is properly registered in the HILTI tracker.

· Monitor the construction equipment loading on a regular basis.

· Communicate with the other projects on the requirement of equipment to be reserved for the critical works.

· Optimize the use of equipment by sharing with other disciplines

· Optimize the use of equipment per the project budget and requirements

11) Resource Planning & Innovative improvements

· Monitor the manpower loading per the projected schedule.

· Set the PI through the project Planner and derive the manpower loading. Conduct the brainstorming session and briefing to the team on the usage of manpower.

· Identify the crew composition and derive the project planning schedule. Monitor the PI on regular basis in along with the loss man hours through the project planner.

· Arrange for a separate session with the crew, who got the negative plans and lesser PI against the Plan.

· Monitor the PI on day to basis through common APP & Smart construction tools.

12) Reports

· Preparation of monthly progress/ project report for the project meeting with the top management.

· Verify the project daily report submitting to the client.

· Document lesson learnt from project to share among the organization to avoid it to repeat again.

· Ensure and monitor monthly management reports to update the status of project status.

· Ensure QHSE records are in placed throughout the project monitor the cash flow and the commitment reports on a monthly basis.

· Review Finance report to understand the company finance status.

13) Goals

· Completion of project within the time schedule.

· Manage the multiple EPC Projects (more than 2 projects) and complete the project handover in a suitable time frame. Optimize the manpower by sharing with the projects going under the stated portfolio.

· Completion of project by achieving the customer satisfaction of 80% in minimum.

· Achieve the project total man hours lesser than the projected man hours.

· Obtain additional Variation orders from the end users by proposing alternate ways in execution. Target to get VO of about 10% in at least from the project contract.

· Completion of projects per schedule and before the schedule of completion.

· Achieve “0” NCR on the project execution and quality.

· Ensure to complete the project with “0” accident and “0” Near Miss.

14) Career Path:

· To become a stronger professional project manager for the overall disciplines and set the target of REI to manage the project management department.

· Accrue more projects on EPC and to work independently.

· To reach the height of Project manager for E&I works in 3 Years of time and to work as a Project manager for overall discipline in 9 years of time from present.

Requirements

· Preferably Degree/Diploma in Engineering in Mechanical, construction management or equivalent.

· Preferably 5-10 years’ experience in construction experience in EPCM, EPCC sector.

· Proven track records of successful project completion on time and on budget or exceeding expectations will be well regards.

· Demonstrated leadership experience and skills to manage large or multiple construction projects

· Preferably computer literate in MS Office Word, Excel and PowerPoint

· Preferably 3 to 5 years of management experience

· Positive attitude with good interpersonal skills

· Ability to work in a dynamic and fast paced environment.

Responsibilities Specific to the Role:

· Create, maintain, and report on site project and program scope, schedules, and milestones

· Work closely with the Client’s Management team throughout the project lifecycle

· Ensure on-site delivery and maintenance of all structured cabling and connectivity

· Lead on-site progress meetings with Owners Representative and Subcontractor teams

· Identify and manage risks, schedule, and budget

· Track and manage project change orders

· Manage Subcontract financial forecasting

· Continually review project for efficiencies in schedule, budget, and opportunities to enable cross-functional partners to be successful

Minimum Requirements:

· Minimum 5+ years’ Experience in structured & fiber optic cabling projects

· Experience in leading deployments of Network/Structure cabling infrastructure

· Documented experience reviewing and leading installations to design documents and specifications

· Experience with outside plant cabling (OSP) deployments including OTDR/OLTS testing

· Documented experience on Quality Assurance and Quality Control including progressive inspections and acceptance

· Documented fiber optic testing at scale inclusive of complex troubleshooting

· Demonstrated experience in EH&S with a good understanding of relevant safety protocols

· Extensive knowledge of installation standards and local codes

· Experience in a lead role within a construction environment or large-scale project including leading people and teams

· Excellent written and verbal communications skills required

· Experience in collaborating across multi-disciplines to deliver towards a common goal

· Proficiency with Microsoft Office Suite of tools

Preferred Qualifications

· Prior experience in a mission critical environment requiring coordination across multi-disciplines for delivering a common goal

· Technical Subject Matter Expert (Optical Fiber/ DAS/ OSP/Structured Cabling/Carrier)

· Systems Experience - BiM360, Unifier, E-Builder, ProCore, Primavera P6, DCIM

· Experience in operations in network Switching, routing and design

The incumbent is responsible for identifying market, product portfolio and individual customer strategies and opportunities. This position requires a strategic thinking, self-starting individual who is able to communicate with varying personal backgrounds in a business and social environment. This role is for Singapore / Brunei territory only.

Key Responsibilities

Market Development:

• Identify and develop new business opportunities, markets, and customer segments for Electric Motors / IOT products and services.
• Analyse market trends and competitor strategies to position our products effectively.
• Develop and implement strategic plans to penetrate the market and achieve sales targets.
• Strong Focus on MRO sales and development for Electric motors to new and existing customers.
• Business Development of IOT solutions

Customer-Relationship-Management:

• Build and maintain strong relationships with key customers, OEM partners, and stakeholders.
• Lead technical discussions, negotiations, and contract discussions, ensuring favourable terms and long-term partnerships.

Sales Strategy and Execution:

• Drive sales activities, from lead generation to closing deals
• Manage the sales pipeline, forecast sales, and report progress regularly to the Managing director

Skills:

• Strong analytical skills with the ability to identify market opportunities
• Excellent communication and negotiation skills, with the ability to influence decision-makers.
• Strong organizational skills and attention to detail.

Experience & Pre-Requisites:

• Proven track record in electric motor sales or relevant e.g electrical / automation / instrumentation solutions
• Good contacts with end-users in the Oil and Gas / Chemicals/ Manufacturing / semiconductor / Industrial segments
• Minimum 2~ 3 Years Sales experience in Electrical solutions selling
• ITE / Diploma or Bachelor’s degree holder in Electrical, Mechanical Engineering or relevant discipline
• Possess class 3 driving license and preferably to have own transport (Transport allowances will be provided)

Job Highlights

• Career Advancement Opportunities
• Young and Passionate Team Environment
• Attractive Performance Bonuses
• Friendly and Supportive Working Culture

Responsibilities

• Manage successful and effective project execution, including planning, implementation, scheduling, monitoring, and handover within specified timelines, budgets, and quality standards.
• Oversee project budget controls, track expenditures, and implement strategies to reduce project delivery costs.
• Review and analyze contract documents and drawings. Communicate and negotiate with consultants, clients, authorities, and contractors on engineering, contractual, and project implementation matters.
• Monitor overall productivity and recommend improvements to enhance efficiency.
• Ensure compliance with health, safety, and regulatory standards, as well as all applicable permits.
• Prepare and submit monthly progress reports to stakeholders.
• Define roles and responsibilities clearly for team members and ensure their deliverables meet scope and schedule requirements.
• Supervise and guide team members to ensure compliance with project standards and objectives.

Requirements

• A degree in Civil Engineering recognized by the Professional Engineers Board (PEB), Singapore, is an advantage.
• Minimum 6 years of relevant project management experience in the local construction industry.
• Proven experience in managing at least one full project cycle with a project value of $50M or above.
• Prior experience with LTA and PUB projects is preferred.
• Strong leadership, planning, interpersonal, communication, and negotiation skills to lead teams and manage subcontractors effectively.
• Ability to handle multiple tasks while meeting high standards and deadlines.
• Highly motivated, detail-oriented, and driven by excellence.
• Proficient in MS Project.
• Candidates who can start work on short notice will have an advantage.

We are seeking a skilled and strategic Product Manager to handle the product development initiatives within research and development (R&D) environment, working with cross-functional teams, and assist in facilitating technology transfer processes. This role will involve managing the transition of technologies from the research phase to commercial production, ensuring that new innovations are successfully integrated into market-ready products.

KEY DUTIES AND RESPONSIBILITES:

Technology Transfer Initiative:

• Ensuring the smooth transition of technologies from R&D to manufacturing or commercialization.
• Coordinate with R&D, engineering, manufacturing, and regulatory teams to ensure that technologies are transferred successfully and meet all operational and quality requirements.
• Develop and implement technology transfer plans, timelines, and milestones, tracking progress and addressing potential challenges.
• Collaborate with stakeholders to ensure that the product or technology is scalable, cost-effective, and aligned with business objectives.

Product Development & Innovation:

• Manage product development initiatives from concept through prototyping and final product launch, ensuring the integration of research outcomes into viable products.
• Work closely with R&D teams to understand the scientific and technological aspects of innovations and translate these into marketable products.
• Coordinate the activities of R&D teams, including scientists, engineers, and regulatory experts, to ensure timely and effective product development.
• Define product requirements based on market needs, customer feedback, and technological capabilities.

Cross-FunctionalCollaboration:

• Partner with R&D, manufacturing, marketing, regulatory, and quality assurance teams to ensure alignment throughout the product development lifecycle.
• Provide clear communication across teams to ensure everyone is aligned with product goals, timelines, and expectations.
• Serve as the primary point of contact between R&D teams and other functional departments to facilitate information flow and decision-making.

Regulatory and Compliance Management:

• Ensure that all products meet regulatory and compliance standards for their respective markets.
• Collaborate with regulatory teams to support the preparation of necessary documentation for product approval or commercialization.
• Maintain an understanding of relevant industry standards and regulations to ensure products meet all necessary certifications and legal requirements.

Product Launch & Commercialization:

• Develop go-to-market strategies, including pricing, positioning, and distribution plans, in collaboration with the marketing and sales teams.
• Monitor and support the product during the commercialization phase to ensure successful market entry and adoption.
• Provide input and recommendations to enhance product portfolio based on customer feedback and market data.

Risk Management and Problem-Solving:

• Identify potential risks during the technology transfer and development phases, proactively addressing challenges to ensure the timely delivery of the product.
• Address technical and operational issues that may arise during the transfer of technologies to manufacturing or commercialization.

Data Analysis and Reporting:

• Use data and analytics to track the progress and success of technology transfer projects and product development efforts.
• Regularly update leadership on progress, challenges, and key milestones in the technology transfer process and product lifecycle.

Continuous Improvement:

• Identify opportunities for improving the technology transfer process and product development strategies.
• Stay current on industry trends and emerging technologies, incorporating new approaches and best practices into the product management lifecycle.

Education:

Bachelor's degree in Engineering, Life Sciences, Chemical Engineering, Biotechnology, or a related field. Advanced degree (Master’s, PhD, or MBA) is a plus.

Experience:

5+ years of experience in product management, technology transfer, or R&D management, ideally within a biotechnology, pharmaceutical, or technology-driven industry.

Skills:

• Strong understanding of R&D and technology transfer processes, including both technical and regulatory requirements.
• Proven experience leading cross-functional teams, including R&D, engineering, and manufacturing.
• Exceptional project management, organizational, and communication skills.
• Familiarity with regulatory and compliance standards relevant to the industry (e.g., FDA, EMA, NMPA, HSA, ISO).
• Knowledge of product lifecycle management and commercialization strategies.
• Strong analytical skills with the ability to assess and mitigate risks.

Preferred Skills:

• Technical background with a strong understanding of product development in scientific or engineering fields.
• Experience in managing technology transfer in industries like pharmaceuticals, biotechnology, or advanced manufacturing.
• Familiarity with Agile methodologies in product development.
• Strong problem-solving and decision-making abilities.

Why Join Us?

• Work on cutting-edge innovations with high potential impact in pharmaceuticals.
• Opportunity to shape the future of products transitioning from R&D to the commercial market.
• Collaborative and dynamic work environment that encourages professional growth.
• Competitive salary and benefits package, with opportunities for career advancement.

This role combines both technical and managerial expertise, providing a unique opportunity for a Product Manager to lead complex product development efforts, ensuring innovations successfully transition from R&D to market-ready solutions.

Details:

Our client is a significant player in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised telecommunication system integrator in the oil and gas global market, they provide turnkey project systems that cover a full spectrum of services in the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

They are looking for a Sales Manager (Energy and Offshore) to expand their Energy business in the Oil/ Gas and offshore markets in both local and regional areas.

Reporting to the Head of Energy, he/ she will:

1️⃣ Identify and engage new prospects, recommending marine products, integrated systems, and services.

2️⃣ Manage and analyze sales leads to develop and forecast business plans for potential customers.

3️⃣ Execute business plans aligned with corporate goals to achieve sales targets.

4️⃣ Collaborate with the proposal team to deliver high-quality, customer-focused proposals.

5️⃣ Coordinate with the technical team to ensure efficient sales and seamless delivery of systems and services.

6️⃣ Address customer inquiries and nurture relationships with existing clients.

Requirements:

1️⃣ Diploma/Bachelor's Degree in Engineering (Electronics, Electrical, Mechanic, Marine & Offshore)

2️⃣ Possess excellent business acumen, communication & presentation skills

3️⃣ Experience as Ex-Sailors, Ex-Radio Officer, or Ex-Navy personnel are added advantage

4️⃣ Respectable network and customer contacts with local and regional shipyards and ship owners

5️⃣ Good marine industry knowledge in the Energy Sector

⭕️ Please send your updated resume to: berrylim(at)rapidrecruitmentasia.com

For quicker response, please contact me (Berry) directly at:
Telegram: (at)Berryseisei or HP: (at)+65 92472216

Rapid Recruitment Asia Pte Ltd (16C8261)
Berry Lim (R23117685)

Responsibilities:

• Report to Project Director on project management, site management, and risk control to achieve project goals.
• Handle construction planning, scheduling, baseline programs, and coordinate with consultants, contractors, and suppliers.
• Monitor project schedules and report progress according to the baseline program.
• Assist PD in preparing project reports (e.g., monthly reports, VO management, EOT assessments).
• Liaise with clients, authorities, consultants, subcontractors, and suppliers on project matters, providing technical and non-technical solutions.
• Conduct technical reviews to ensure contractual compliance and timely completion.
• Support the Contracts Department with tenders, including drawings, method statements, proposals, and claims preparation.
• Attend meetings with clients, consultants, and contractors to ensure progress remains on schedule.
• Oversee quality control, safety, and EHS practices on-site, identifying high-risk activities and approving method statements.
• Undertake additional duties as assigned by management.

Requirements:

• Diploma and above in Civil Engineering or equivalents.
• Minimum of 5 years of relevant working experience.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Roles & Responsibilities:-

Element has an opportunity for a Civil Manager. In this role, you will be a member of the operational leadership team reporting to the Operations Manager or General Manager and perform a variety of leadership responsibilities within the department (facility revenue of less than $3M) to ensure timely and accurate test results are delivered. All Operational Leadership positions must be proficient in several core business skills including but not limited to compliance with established safety rules, code of conduct, and company policies and procedures.

Responsibilities:-

Responsible for the department's safety performance and awareness; spearheads and manages initiatives that drive a culture of safety first
Under the direction of the Operations Manager and/or General Manager, helps lead the efficient operation and growth of the assigned department
Plan, assign and schedule work for designated staff
Assists in the engineering and coordination of projects from start to finish
Works to ensure quality, timeliness, consistency, and accuracy of test reports
Demonstrate knowledge of Element capabilities, processes, and expertise to be able to explain the benefits of Element testing services clearly
Represents Element with the highest levels of integrity and professionalism at all times
Responsible for promoting and ensuring the Element quality assurance and safety program initiatives are executed upon
Responsible and accountable for assigned staff decisions including hiring, performance management, performance review decisions and execution, and approval of overtime and time cards
Work with assigned staff to ensure work schedules are maintained and balanced
Maintain an environment of respect and dignity within the department covering employee interactions and problem-solving while ensuring work rules are known and followed
Manages a team with fairness and consistency and takes an interest in the development of direct reports
Provide general administrative functions as required (invoicing, job list upkeep, supply report data for creation)
Review testing services and promote additional capacity and process improvement
Translate the technical requirements of the client into providing pricing, timing, and technical knowledge for quoting and commercial efforts

Skills / Qualifications:-

Bachelor's Degree in Civil Engineering / Materials Science and 5 years of Work Experience in Manager

SEJ is one of the largest food solutions providers in Singapore, and we are currently looking for an HR Executive seeking a long-term career in HR.

Job Description

• Manage and maintain our HRIS system, including data entry, report generation, and system updates.
• Provide comprehensive HR support to employees, including onboarding, offboarding, benefits administration, and performance management.
• Assist in various HR projects, such as talent acquisition, employee engagement initiatives, and policy development.
• Ensure compliance with local labor laws and regulations.

Job Requirements:

• Bachelor's degree in Human Resources, Business Administration, or a related field.
• Converse in Chinese with Chinese-speaking stakeholders
• Able to work as a team player and contribute solely at times
• Show initiative and willingness to learn
• Able to think critically and show sound judgment on the unexpected.
• Able to work 5.5 days

There is never a dull day at SEJ. Join us if you seek challenges and job stability at the same time.

Job Summary:

We are looking for a dynamic and experienced HR Coordinatorto lead and manage the HR operations in our Singapore office. The ideal candidate will focus on executing operational HR strategies and initiatives that support the business's goals. This includes overseeing employee lifecycle processes, ensuring compliance with local employment regulations and driving HR process improvements. You will work closely with the regional HR team and business leaders to create an efficient, engaging, and productive work environment.

Key Responsibilities:

Work Pass Management:

• Process and manage work pass applications (Employment Pass, S Pass, Work Permit, Dependant Pass, etc.) for foreign employees.
• Ensure timely renewal, cancellation, and updating of work pass details in compliance with Ministry of Manpower (MOM) regulations.
• Act as the primary contact for all work pass-related inquiries from employees and relevant authorities.
• Keep up to date with changes to work pass regulations and ensure the company remains compliant.

OFWAS (Online Foreign Workers Address Service):

• Administer the OFWAS process for foreign workers, ensuring accurate and timely updates to their residential addresses in the MOM system.
• Assist employees in registering and updating their address information via the OFWAS portal.
• Ensure that all foreign worker address-related requirements are met and in compliance with MOM guidelines.

MWOC (Migrant Worker Onboarding Centre):

• Coordinate the onboarding process for migrant workers through the MWOC, ensuring that all workers complete the mandatory onboarding requirements.
• Provide guidance to migrant workers regarding the necessary documentation and steps for onboarding at the MWOC.
• Ensure that all migrant workers' onboarding documents are processed, and related data is uploaded to the MOM portal.

Training Certificates Upload:

• Assist employees in ensuring that required training certificates (such as safety and compliance training) are obtained and correctly uploaded to the MOM portal.
• Ensure compliance with MOM requirements related to training and certifications for foreign workers.
• Track employee training records to ensure that all certifications are up-to-date and uploaded within the required timelines.

General HR Coordination:

• Assist with employee onboarding, ensuring all documentation (contracts, medical checks, and identification documents) is verified and processed.
• Managed foreign workers' related matters such as security bonds, OFWAS, PCP, and air ticket bookings.
• Provide administrative support to the HR team in handling employee queries and ensuring smooth day-to-day HR operations.

Compliance and Reporting:

• Ensure the company’s HR practices comply with the Employment Act, MOM regulations, and other relevant laws.
• Prepare and submit necessary compliance reports to MOM and other relevant authorities as needed.
• Support in internal audits, ensuring all records related to work passes, OFWAS, MWOC, and training certificates are up-to-date and complete.

Qualifications:

• Bachelor’s degree in human resources, Business Administration, or related field.
• Minimum 5 years of HR experience, with a focus on HR operations.
• Strong knowledge of Singapore labour laws and MOM regulations.
• Excellent communication and interpersonal skills.
• Analytical and problem-solving abilities, with a focus on continuous improvement.
• Ability to work in a fast-paced environment, manage multiple tasks, and meet tight deadlines.
• Demonstrated ability to maintain confidentiality and handle sensitive information.