• Responsible for all site works and activities
• Ensure effective project planning and implementation, efficient use of resources, and proper co-ordination and delegation of works to successfully complete project by the contractual deadline and within the budgeted cost.
• Ensure all works carried out meet company’s quality standards and requirements
• Engage and coordinate internal resources, engineers, consultants, and solar installers in preparation and execution of project plans through completion.
• Review and take ownership of project budgets including cost of permits and fees, third-party consultants, and construction costs for off-site, site work.
• To ensure site supervisors, foremen and workers comply with client & regulatory requirements
• To ensure high Environmental, Safety and Health standards are upheld on site at all times
• Other ad hoc duties assigned by company from time to time

Job Description:

• Design wide range of mechanical / structure / company’s product.
• Analyse and interpret design schematics.
• Direct accountability in managing individual efficiency and completion of work schedule.
• Attend meetings with internal and external stakeholders to discuss on their requirements in new project and/or project proposals.
• Research and develop new ideas and concept to enhance company’s performance and competitiveness.
• Work closely with various Departments to ensure timely deliverance of projects.
• Adhere to design and process system in accordance with ISO 9001 guidelines and to constantly monitor and upgrade our quality standards.
• Any other ad-hoc tasks as assigned.

Requirements:

• Degree / Diploma in Mechanical Engineering with minimum 2 years relevant experience.
• Good knowledge using 2D & 3D design software (Solidworks).
• Good communication skills, positive mind-set, hardworking and able to multi-task.

Interested candidates, do send your resume to [email protected]. ONLY shortlisted candidates will be notified through email for an interview.

Job Description

• Configure and manage critical systems, including Active Directory (AD), telephony, video conferencing, access points (AP), firewalls, VPNs, and more. Monitor and analyse the performance of LANs, WANs, and wireless networks to ensure optimal functionality.
• Configure laptops and desktops for new and existing staff, perform system backups, and handle disaster recovery (DR) as needed. Ensure all automatic system backups are in place.
• Apply system patches after hours to maintain system stability and security. Perform routine system checks to ensure continuous operations.
• Work with third-party support vendors to resolve technical issues. Participate in IT auditing and documentation to ensure compliance with company policies.
• Provide IT support for approximately 200 users, managing user accounts and roles within the ERP system. Troubleshoot login issues, assist with basic system navigation, and resolve minor technical problems.
• Monitor ERP system performance, address minor issues, apply updates, and generate routine reports for departments like finance, HR, and inventory. Customize reports based on user requirements.
• Maintain documentation for common IT processes, user guidelines, and troubleshooting procedures. Optionally, assist with creating and launching new business processes within the company.
• Perform routine backups, monitor system security, and follow compliance protocols under the guidance of the IT team.

Requirements

• Diploma or Degree in IT/Computer Science.
• Possess CCNA / Microsoft certification.
• Proven experience in providing technical support in a corporate IT environment.
• Experience with Veeam and Microsoft 365 administration.
• Familiarity with leading wireless vendors’ products (Cisco/Meraki, Aruba/HPE, Ruckus) is advantageous.
• Knowledge of virtualization technologies such as Hyper-V and VMware is a plus.
• Strong communication and administrative skills.
• Ability to manage multiple tasks and prioritize in a fast-paced environment.

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

Responsibilities

• Data Collection & Reporting: Assist in gathering, organizing and analyz-ing data from web based data, focusing on key performance indicators such as waste and recycling tonnage.
• Liaising with operations: Work closely with operational teams ensure timely and accurate submission of operations data. Provide support and guidance to operations as needed to improve data reporting processes.
• Data Accuracy & Quality Assurance: Perform regular data quality checks to verify accuracy, completeness, and consistency of sustainability data. Identify discrepancies or issues and work with local teams to resolve them.
• Updating of route plan masterlist: Assist in the updating process for new collection data points.
• Liaising with estate managers: Provide estate managers sustainability data in a timely and accurate manner.
• Data Entry & Updates: Ensure that all sustainability data is entered into the relevant tracking systems on time and in line with reporting sched-ules.
• Develop & Maintain Reporting Tools: Assist in creating and maintaining data dashboards and reports that provide real-time insights into sustaina-bility performance.
• Reporting Support: Help prepare periodic sustainability reports and presentations for internal stakeholders
• Collaboration & Communication: Work closely with customer service team to serve as a joint point of contact for sustainability data
• Ad-hoc Project Support: Assist with various sustainability initiatives and projects as required, providing data support and helping to implement new programs or processes

Requirements:

• Have at least 1-2 years of experience in sustainability data or related fields.
• Graduated from a diploma program in Environmental Science, Sustaina-bility, Engineering, Business, or a related field.
• Strong analytical skills, with experience in data collection, cleaning, and analysis.
• Proficiency in Microsoft Excel, Google Sheets. Data analysis tools (e.g., Power BI, Python) is a plus but not required.
• Interest in sustainability and environmental impact, with a willingness to learn and contribute to global sustainability efforts

Responsibilities:

• Architect and implement transformative software solutions using the latest technology trends
• Lead in the design and development of key features, propelling our product portfolio to new heights
• Collaborate with multidisciplinary teams to build robust, scalable systems
• Contribute to creating high-quality, innovative software that meets the evolving needs of our clients
• Stay ahead of industry trends, harnessing emerging technologies to enhance our software solutions

Requirements:

• Degree in Computer Science/Computer Engineering/Information Technology or a related field
• A .NET guru with a deep understanding of modern software architectures, microservices, and API development
• Experienced in cloud-based development, containerization (Docker/Kubernetes), and infrastructure as code (Terraform/Ansible)
• A database wizard, adept in designing, managing, and optimizing databases (SQL, NoSQL, etc.), with a solid foundation in data analysis and machine learning
• Versatile across various operating systems including Linux, Mac OS, Windows
• An excellent problem solver with a keen eye for detail, and experience in agile methodologies and DevOps practices
• Familiarity with React.js, Node.js, and other frontend technologies would be an added advantage
• Candidates with more years of related work experience may be considered for a senior position
• Remuneration will be commensurate with experience

Engineering Project Managers are pivotal in steering complex engineering projects from conception to completion, ensuring that technical solutions are delivered on time, within budget, and to the required quality standards

Defining project scope, goals, and deliverables in collaboration with senior management and stakeholders

Developing detailed project plans that outline specific engineering tasks, timelines, and resource allocations

Coordinating cross-functional teams of engineers, designers, and technical staff to ensure project milestones are met

Managing project budgets, including cost estimation, budget tracking, and financial reporting

Ensuring compliance with industry standards, regulatory requirements, and company policies

Identifying, assessing, and mitigating project risks and issues throughout the project lifecycle

Communicating effectively with stakeholders to provide project updates, gather feedback, and make informed decisions

Conducting post-project evaluation to identify successful elements and areas for improvement for future projects

Continuously updating project documentation and maintaining accurate records for all project-related information

Leading and motivating project teams, providing guidance and support to foster a collaborative work environment

Leading and motivating project teams; assigning tasks and deadlines

Managing project budgets and resources, including adjustments as necessary

Identifying, assessing, and minimizing project risks throughout the project lifecycle

Directing the allocation of resources across various projects for optimal efficiency

• To plan and execute corrective/preventive maintenance on facility equipment and production equipment to ensure good efficiency and availability.
• Implement TPM program in HPSL such as autonomous maintenance and critical spare part management.
• Engage external equipment vendor for service contract and ad hoc diagnostic or corrective maintenance activities.

Support safety and EHS related activities and audits.

Description of Responsibilities and Duties

1. Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
2. Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
3. Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
4. Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
5. Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
6. Perform site EHSS inspection/audits and ensure that all corrective / preventive actions are close in timely manner. Responsible for internal/external audits and EHSS activities.
7. Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
8. Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Knowledge:

• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.

Skills:

• Able to read electrical, hydraulic, pneumatic and mechanical diagrams and carried out maintenance work accordingly.
• Lead and guide technicians on above work.

Abilities:

• Operational hands-on experience
• Work under pressure and multi-tasking.
• A good team player and have good interpersonal skills
• Safety conscious

Education:

Degree/Diploma in Mechanical Engineering or equivalent

Experience:

• Minimum 5 years of relevant working experiences
• Experience in chemical and mechanical process

Competencies:

• Fast Learner
• Willingness to learn
• Self-Initiative
• Team Spirit
• Self-responsibility
• Physical Fit

Working Conditions:

Chemical Production Environment. A skin allergy/blood count medical test may be required as part of the employment medical checkup.

Mandatory Skills

We are seeking a skilled and motivated Data Engineer with expertise in Scala, SQL, and Hadoop to join our dynamic team. In this role, you will design, develop, and maintain scalable data pipelines and systems to process large datasets. You will collaborate with cross-functional teams to deliver high-quality solutions for data storage, transformation, and analytics.

Key Responsibilities

Data Pipeline Development

o Design, build, and optimize scalable data pipelines using Scala and Hadoop frameworks.

o Implement ETL processes for ingesting, transforming, and storing data from various sources.

Data Analysis and Query Optimization

o Write and optimize complex SQL queries for efficient data retrieval and transformation.

o Troubleshoot and resolve performance issues in queries and data workflows.

Big Data Ecosystem Management

o Manage Hadoop-based data infrastructure, including HDFS, Hive, and related components.

o Monitor system performance and optimize resource utilization in a distributed environment.

Collaboration and Problem Solving

o Work closely with data analysts, data scientists, and business stakeholders to understand requirements and translate them into technical solutions.

o Provide technical guidance and best practices for data engineering within the team.

Automation and Monitoring

o Develop scripts and tools to automate repetitive tasks and enhance system monitoring.

o Ensure data quality and consistency through validation and monitoring mechanisms.

Documentation and Compliance

o Document technical solutions, workflows, and processes to ensure knowledge sharing and reproducibility.

o Ensure compliance with data governance and security policies.

Skills and Qualifications

Technical Skills:

o Proficiency in Scala programming and functional programming principles.

o Strong SQL skills, including query optimization and database design.

o Hands-on experience with Hadoop ecosystem tools (HDFS, Hive, YARN, MapReduce).

o Familiarity with other big data tools like Spark, Kafka, or Flink is a plus.

Problem-Solving:

o Strong analytical skills with the ability to troubleshoot and resolve complex data issues.

Communication:

o Excellent communication skills to effectively collaborate with technical and non-technical stakeholders.

Experience:

6+ years of experience in data engineering, big data technologies, or a

similar role.

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

Job Description

- Work with Production Engineers, Supervisors and Technician to design, develop, and improve engineering processes.

- Planning and coordinating of production schedule and production output.

- Plan and implement improvement projects for productivity improvement

- Ensuring all monthly operating expenses stay within allocated budget.

- Support inspections of equipment and scheduling maintenance or repairs with Maintenance Dept

- Inspecting inventory and reporting inconsistencies as well as ordering more materials.

- Producing CAD drawings, nesting thru company smart system according to our standard specifications.

- Evaluating first article and processes and ensuring standardization of quality assurance measures.

- Calibrating and troubleshooting of equipment /machines as required.

- Perform time study and improve standard time hour

Job Requirements:

- A degree or minimum diploma in Engineering discipline.

- Minimum 2 years' experience in precision engineering in manufacturing industry

- Proficient in 3D drawing software – Solidworks

- Proficient in Microsoft Office

- Familiar with manufacturing quality assurance techniques

- Understand 5S discipline, TQC and other quality improvement tools

- Good interpersonal skills, problem-solving and project management skills

Job Responsibilities:

- Perform basic and advanced machine electrical wiring works

- Develop electrical testing jigs and perform testing and validation of machines

- Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity.

- Creates, implements, and monitors KPI indicators on product quality and section capability

- Provide shop floor feedback to Production Engineering and D&D Department

- Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models

- Perform machine pre & post machine power ON inspection checks, machine parameter settings, testing and inspection according to standard

- Able to troubleshoot and resolve machine electrical non conformance

- Perform machine final electrical inspection and adjustments for any defects to maintain high level of quality

- Prepare reports on productivity, quality, claims, etc

- Work with engineering and other departments to improve assembly processes

- Monitor the serviceability of measuring electrical instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition

- Maintain accurate records of inspection result at each electrical process

Job Requirements:

- Minimum Diploma or equivalent in Electrical required

- 2-3 years working in a machine assembly environment

- A good track record of supporting the department achieving KPI

- Strong understanding of 5S and HSE knowledge

- Able to work effectively in a fast and ever-changing stressful environment

- Maintain good Quality standards, 5S and safety discipline

- Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)

- Knowledge of drawing software(Solidworks, Unigraphic, etc) is added advantage

Meranti Power Pte Ltd, a fully owned subsidiary of Energy Market Authority, is currently in the final phase of power generating station development. and will thereafter, operate and maintain the power generating station. We are inviting applicants for the position of Senior Engineer, Electrical who shall report to the Head, Electrical. The scope and requirements are as follows:

RESPONSIBILITIES :

A. Current & future Project

• Ensure compliance to the prevailing Workplace Safety and Health Act and all relevant authorities’ regulations.
• Assist the Project Director and Head (Electrical) in all phases of Project Cycle related to all electrical systems and equipment including conceptual stage, drafting work scope for Owner’s Engineer consultant, system design and engineering stage, execution stage and right up to commissioning.
• Work with the Consultants for the timely completion and cost-effective implementation of the projects.
• Participate in the design review, implementation & commissioning of new power plants’ Electrical systems, including evaluation and recommendations for acceptance of the Consultants/Contractors’ Electrical systems engineering design and selection, procurement, and installation proposals for the power plant to ensure successful commissioning on time & within budget.
• Detect and provide prompt triggering of risks or potential risks to avoid/minimize delays or losses, recommend cost effective plans and monitor finances to ensure each phase of Electrical system works is started and completed on time and within the budget allotted.
• Attend meetings with various stakeholder to report on project progress against milestones and challenges faced
• Manage problems resolution processes with Head (Electrical) and consultants with respect to power plant project Electrical systems design, implementation, installation, and commissioning and resolve co-ordination/interfacing issues with other parties.
• Provide status updates to Head (Electrical) for report to MP’s Senior Management on progress of major Electrical systems project activity against the schedule, highlighting significant milestones and any issues/interfacing affecting or may affect project cost and schedule.
• Support Head (Electrical) to communicate, coordinate and collaborate with Contractor, external parties and agencies (SPPG, EMA/ PSO, JTC, etc) with regards to Meranti Power’s 400kV Switchhouse/ Substation, SPPG feeder connections, Gas Insulated Switchgears, Generator Step-up Transformer, Insulated Phase Bus Duct, etc. at different stages of the project (including Commissioning).

B. Operation & Maintenance Phase

• Be familiar with all regulations pertaining to the Electrical systems of the power station’s equipment, auxiliaries and common systems maintenance works and safety, e.g. Workplace, Safety & Health Act’s Regulations, including Risk Assessment and Mitigating Measures, Work Methods, Permit-to Work, Lock-Out-Tag-Out System in relation to maintenance of Electrical equipment in the power generation station.
• Prepare technical specifications for equipment electrical parts and work services when required. Work with Procurement to manage the procurement of Electrical parts and services.
• Coordinate all Electrical Maintenance programmes (Predictive, Preventive, Corrective) and liaising with relevant stakeholders to ensure safe and timely completion of works.
• Be familiar with Predictive Maintenance monitoring techniques.
• Familiar with use of Computerised Maintenance Management System (CMMS).
• Manage and optimize all planned plant/equipment electrical maintenance activities during minor and major overhauls and inspections
• Responsible for the functional tests and analyse the failures related to Electrical systems and components and recommends remedial/mitigation measures to prevent recurrence. Troubleshooting of faults/defects & carry out failure analysis to determine root cause.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Supervision of Electrical maintenance contract works and prepare work procedures and risk assessment for all Electrical maintenance activities
• Manage day-to-day activities of Electrical team effectively; may be appointed as Reporting Officer to technical officers.
• Support Head (Electrical) to engage and manage Licensed Electrical Worker (LEW), Qualified Persons (QP), Competent Persons (CP) to carry out the required services and works.
• Track the year-to-date expenditure against the approved department Electrical budget; Support Head (Electrical) to prepare upcoming budgets.
• Prepare Department’s Electrical monthly report
• Design, coordinate and conduct training on Electrical matters

C. Other tasks

• Perform administrative tasks for the benefit of the organization as instructed by Head (Electrical) or Senior management e.g. secretariat for meetings, staffing duties, presentations, etc.
• Take part in organisation-wide activities in various capacities such as organising committees for events,
• Attend training/ events/ conferences that is in line with the organisation objectives and proceed to share the learning points for organisation benefit

REQUIREMENTS :

• Degree in Electrical Engineering or equivalent.
• Major Project Management experience with at least 3 years in power plants development, implementation, commissioning tests, preferably including operation/electrical maintenance of large power plants, specifically employing Combined Cycle Technology.
• Conversant with international and local codes, standards and recommended practices for design and selection of electrical equipment related to the above plants will be an added advantage.
• Hands-on experience in power plant projects’ tender preparation including technical/functional and commissioning tests specifications for C&I equipment, tender evaluations, contract negotiations, contract administration and contract supervision.
• Experience in overseeing the power plants worksite’s adherence to Workplace Safety & Health, and relevant regulatory requirements.
• Will be required to work beyond office hours in event of plant exigency or emergency.
• Self-motivated, results focused and willing to work under tight schedules with multi-disciplinary teams.
• Able to lead a technical team and harness and direct the strengths of the different members to output greater effect than the sum of each individual. ·
• Willing to work in construction site office during construction stage and Jurong Island. (Morning transportation pick-up points available at different parts of Singapore.)

Only shortlisted candidates will be notified.

By submitting your personal data and/or resume to Meranti Power Pte. Ltd. (“MP”), you shall be deemed to have given your consent to MP for collecting, using, and disclosing your personal data for the purpose of assessing your job application.

Responsibilities:

• Responsible to contribute to product cost savings through identifying opportunities for cost savings & build value engineering project pipeline
• Develop methodologies, templates and approach for target costs based on product analysis data
• Analyze and evaluate design for materials, manufacturing process & supply chain for value analysis / value engineering opportunities
• Execute & drive VAVE projects starting from Idea generation to implementation
• Co-ordinate with Global & local stake holders including suppliers for project execution including samples, prototypes and testing requirements
• Build active VAVE project funnel and build active VAVE project funnel and todDrive multiple VAVE projects in a timely manner to support business goal target
• Establish and update processes for execution on teardown, benchmarking and VAVE requests

Requirements:

• At least 5 years of working experience in the EMS or an MNC environment
• Strong analysis skills, knowledge in material pricing and strategy
• Strong knowledge in Mechanical/Electro-Mechanical/Electronics commodities

Interested candidates are to submit a detailed resume to speed up the application process.

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Addcel has been delivering deep value to clients across Semi-con, Pharmaceutical, Data Centers & Oil & Gas industries since 2010.

Specialising in Design & Build of process utility systems, prefabrication/ DFMA, facility & plant maintenance and construction implementation, we take pride and passion in all that we do.

The Process Engineer reports to the Tender Manager and is responsible for the below:

• Design and develop industrial processes to improve efficiency and safety.
• Perform calculations for flow rates, pump sizing, temperature, and pressure.
• Develop and review process design documents and specifications.
• Utilize process simulation software to model and optimize processes.
• Collaborate with cross-functional teams, including operations, maintenance, and project management.
• Provide technical support and troubleshooting for process-related issues.
• Ensure compliance with industry standards and regulations.
• Conduct risk assessments and implement safety measures.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Chemical Engineering, Mechanical Engineering, or a related field.
• Min. 3 - 5 years of relevant working experience, preferably in Semi-con, Data-centre, Pharma & Oil & Gas.
• Strong knowledge of process design principles and methodologies.
• Experience in the oil & gas, chemical, or manufacturing industries.
• Experience in extracting BOQ from layout and P&ID drawings for tender preparation.
• Experience in attending technical clarification meetings and presentation
• Familiarity with Distributed Control Systems (DCS) and instrumentation.
• Strong knowledge of process utilities design (Chilled Water, Steam, Process Cooling Water, and CDA systems).
• Proficient in pipe sizing, stress analysis, pump head, and hydraulic calculations.
• Familiarity with proposal costing and tendering processes in EPC projects.
• Strong communication skills with the ability to propose alternative technical solutions.
• Detail-oriented and proficient in Excel.
• Excellent problem-solving and analytical skills.
• Strong communication and interpersonal skills.
• Ability to work effectively in a team environment.

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Job Responsibilties

• Provide after-sales product and technical support - engaging with customers, clarification meetings, supporting 3rd party events.
• Design BMS system architecture, HVAC control system and optimization program tailored to each upgrading project requirement.
• Analyse existing BMS operation and HVAC performance to propose system renewal and control system improvement.
• Support project management team on existing building upgrades including testing and commissioning.
• Troubleshoot Yamatake and Azbil product problems for existing maintenance at job site.
• Track and analyse recurring faults or issues in BMS and other monitoring systems to identify patterns.
• Use trend date to provide insights on system vulnerabilities and potential areas for improvement.
• Perform various engineering calculation, equipment sizing and selection and procurement of equipment ensuring it meets safety standards and performance requirements.
• Supports the Sales on technical aspect to formulate Business Development plan for Building Automation Solutions in Singapore.
• Liaise with various departments in Headquarter in Japanese language to report the latest trends and requirements of Singapore Market
• Identifies industry trends, collects and assesses competitive and market intelligence.
• Regularly contact with Japanese and non- Japanese customers to exchange information.

Requirements

• Bachelor's degree in a technical discipline preferred;
• Minimum 4 years of experience in BMS and Automation industry
• Well versed in specification and selection of Yamatake and Azbil building automation system and product, not limited to system and controller but including field devices like sensors, control valves
• Strong communication presentation skills with the ability to present technical information to non-technical stakeholders.
• Proficiency in Japanese Language both verbal and written is a must

Unlock your potential with us! Join us as a Technical Sales Engineer who will be involved primarily in high temperature and corrosion resistant (nickel alloy) materials supporting the petrochemical, aviation, waste to energy, pharmaceutical sector. Your positivity and energy will thrive in this new, rewarding opportunity.

Responsibilities

• Work with well-established customers base in the petrochemical | pharmaceutical | aviation, and OEM industries in Singapore
• Interpret customer requirements
• Understand industry standards and specifications
• Read customer drawings and generate bill of materials
• Formulate sales proposals and negotiate directly with end users to close orders
• Negotiate procurement of materials, parts, sub-contract services and logistics

Requirements

• Degree or Diploma in an engineering discipline
• Working knowledge of industrial piping and related hardware
• Reward driven with a real desire to improve sales and business margins
• Proficient with MS Excel

Advantages

The following optional skills or work experience would be an advantage

• Familiarity with ASME | DIN | JIS and similar material specifications
• Previous experience in a plant or on-site maintenance or engineering role

Additional Information

*The position will be in an office based working environment. No outdoor sales required.

*Applicants without prior sales experience but with engineering background may be considered.

*Monthly Salary Range shown excludes commission component.

Job Description & Requirements

You will be part of an innovative and passionate team, working towards the one ultimate goal of producing high quality software. Your primary duties are design, prepare technical specifications, lead a team of developers, programming, unit-testing, and analytical problem-solving; but may include support for products implementation, integration testing and documentation.

The individual will:

• Responsible for the successful enhancement of software products and solutions by co-operating with other teams to ensure releases that are coordinated in terms of both time and technology.
• Design system architecture; translate user's requirements into functional and technical specifications.
• Participate and manage testing, debugging, verifying design and conduct reviews.· Participate and manage data and solution migration.
• Assist pre-sale in architect technical solution.
• To perform other duties as and when required.

Skills Requirements

• Degree in Computer Science or Information Technology or equivalent.
• In-depth experience in Java
• Working knowledge of Object-Oriented
• Working knowledge on any web framework, with understand MVC concept on the web-based application
• Working knowledge on conceptualizing and designing web-based application
• Preferable knowledge and experience in Spring and Hibernate Framework, Spring Boot, REST, Drools, HTML5, Oracle.
• Possess a passion in software engineering/development, with drives to be an effective team leader
• Ability to communicate effectively and clearly
• He or she should show self-initiative in learning, and self-development
• Ability to work under pressure to deliver projects within the designated deadlines.
• At least 2 to 5 years of relevant experience

#TeSA #TMCA

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

The Senior Engineer, Projects, will lead and manage projects from initiation to completion, ensuring alignment with scope, budget, and timeline requirements. This role involves overseeing mechanical and electrical components' fabrication, assembly, and installation while coordinating with cross-functional teams to meet project objectives.

Responsibilities

• Lead projects, ensuring timely delivery, adherence to scope, and budget compliance.
• Oversee fabrication, assembly, and installation of mechanical and electrical components.
• Coordinate with factories, contractors, and cross-functional teams to align objectives.
• Review and interpret mechanical drawings, specifications, and technical data.
• Ensure fabrication adheres to layouts and designs.
• Collaborate with the procurement team to ensure timely material delivery.
• Conduct quality checks, testing, and inspections to maintain standards.
• Resolve technical issues and implement corrective actions.
• Planned and coordinated with after-sales teams to ensure smooth workflows.
• Maintain project documentation, including progress reports, Gantt charts, and technical records.
• Supervise inbound and outbound activities.
• Inspect parts to ensure compliance with BOM and data sheets.

Requirements

• Degree or Diploma in Mechanical Engineering or related field.
• 5-7 years in a similar role or industry.
• Proficiency in AutoCAD, Microsoft Office Suite, and project management tools.
• Knowledge of mechanical systems, equipment, and industry standards.
• Strong analytical and decision-making abilities.
• Ability to manage multiple projects simultaneously.
• Detail-oriented with excellent problem-solving skills.
• Strong communication and coordination abilities.
• Preferred candidates should have access to a vehicle.

Responsibilities

· Responsible for providing preventive maintenance service for BMS (Building Management System)

· Carry out troubling shooting, analyzing and rectification of the system on time

· Support client with system operation and recommendation for improvement

· Data analyzing and determination of the system operation status

· Response client’s request and attend the issue in short notice

· Supervise subcontractor to carry out the work safely

· Provide the assistance to colleague and mentoring actively

· Ensure all works carried out in accordance with the specified quality and EHS standards

· Prepare and submit quotations, including material, labor, and scope of works

· Perform replacement/repair, fit out works/A&A for existing BMS site

· Perform weekly standby on rotation schedule

· Perform calibration and verification of BMS sensors annually

· Provide sales support BMS service and site survey

Requirements

· Diploma/ Degree from a recognized technical institute

· Hands on experience in BMS Control System

· Hands on experience in programming languages and logic gates

· Familiar with digital fundamental

· Knowledge on basic networking

· Strong customer management & problem solving skills

· Excellent communication & presentation skills

· Skilled in the use of MS office

· Knowledge on ACMV system

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Oversee the installation, testing, and commissioning of piping systems on-site
• Ensure piping installations meet project specifications, codes, and standards
• Address any on-site technical issues related to piping and provide solutions
• Coordinate with contractors, suppliers, and other engineering teams to ensure timely and efficient execution of piping work
• Conduct inspections and tests on piping systems and prepare documentation
• Maintain records of piping activities, including work progress, testing, and inspection reports
• Any duties to be assigned from time to time

Pre-requisites

• Bachelor’s Degree in Mechanical Engineering
• Minimum 5 years experience in a similar role
• Candidates are required to have prior experience in power and/or industrial plant projects
• Proactive learner and ability to multi-tasks
• Ability to adapt to dynamic and challenging construction site environments
• Project Location: Jurong Island

Job Title: Procurement Engineer - Electrical & Instrumentation (E&I)

Main Responsibilities:

1. Supplier Sourcing & RFQs:Source potential suppliers in line with project specifications. Send out Requests for Quotation (RFQs) to suppliers and evaluate responses.
2. Vendor Management:Evaluate new and existing suppliers for inclusion in the Approved Vendor List (AVL). Coordinate with vendors for technical clarifications and requirements.
3. Negotiations & Purchase Orders:Perform negotiations with shortlisted suppliers to obtain the best price while ensuring timely delivery. Ensure that appropriate terms and conditions are included in the purchase orders. Prepare Bidtabs for internal approval. Prepare Purchaser’s Terms & Conditions for purchases over SGD 150K.
4. Project Coordination:Coordinate with the Project Team and suppliers for all procurement-related issues. Manage urgent purchases and ensure timely order processing. Ensure coordination with Material/Logistic Controllers for Goods Receipt/Issue (GR/GI) issues.
5. Vendor Training & Product Presentation:Organize training sessions and product presentations from vendors to ensure project teams are informed of key product specifications and details.
6. Delivery & Expediting:Monitor and ensure the timely delivery of materials and equipment from vendors. Assist in expediting deliveries when required and coordinate with Finance for invoice-related issues.
7. Return & Replacement:Coordinate with vendors for returns or replacements of defective materials. Issue Purchase Orders (PO) for replacements, as necessary.
8. Documentation & Reporting:Maintain accurate records of procurement activities and report to Supervisor on progress. Ensure all procurement documents are archived and accessible as per company requirements.

Qualifications & Skills:

• Diploma / Bachelor's degree in Engineering, Supply Chain Management, or a related field.
• Proven experience in procurement and supply chain management, especially in Electrical & Instrumentation (E&I).
• Strong negotiation skills and vendor relationship management.
• Proficient in procurement software and MS Office (Excel, Word, PowerPoint).
• Ability to work in a team and handle multiple tasks simultaneously.
• Strong organizational and communication skills.
• Knowledge of industry standards and regulations in procurement.

Job Description

• To drive maintenance activities to maintain high efficiency of the equipment and minimise machine downtime as per KPI.
• To lead troubleshooting and root cause analysis of machine delays especially on mechanical faults.
• To develop and implement maintenance plans on all equipment to minimise downtime.
• To monitor cost as per KPI, maintain inventory of spares, liase with vendors and partners and to coordinate activities with other departments to ensure efficient operation.
• To develop, plan and implement automation projects to improve machine safety, reduce human intervention and maximise productivity.

Job Requirements

• Bachelor Degree in Mechanical / Electrical Engineering or equivalent studies
• Minimum 2 years in the maintenance field
• Experienced in automation, mechanical & electrical maintenance in a manufactoring environment
• Safety conscious
• Able to work in a hot and dusty environment