The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Job Description:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach Engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 5 years of relevant work experience in Diffusion Implant Equipment
• Familiar with all the implant tools: Varian E500, VIISTA900, Axcelis GSD, Axcelis HE/VHE. AMAT XR80.
• An excellent team player with good interpersonal, communication and written skills
• Strong leadership capability to lead and provide guidance to juniors
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

Position Summary:

The Senior AV Service Engineer is responsible for providing technical support, data collection, coordinating maintenance and operation activities to ensure the optimal operation of autonomous vehicles.

Key Responsibilities:

Level 1 Troubleshooting and Technical Support:

• Provide on-site Level 1 troubleshooting support (when activated) and debugging for technical issues encountered. Work with Level 2 support to identify, diagnose, and resolve basic configurations concerns, or minor hardware malfunctions.
• Collaborate with specialized teams or senior engineers to escalate complex issues beyond Level 1 for further analysis and resolution.
• Offer comprehensive customer support by resolving queries, providing technical assistance, and ensuring customer satisfaction.

Data Collection and Analysis:

• Execute routine data collection processes from data loggers, onboard sensors, software systems, diagnostic tools and feedback forms
• Analyze collected data to identify performance patterns, trends, and potential areas for optimization or preventive maintenance

Maintenance Coordination:

• Conduct and facilitate regular inspections, diagnostic tests, and scheduled maintenance for all vehicle assets including on-board equipment to ensure optimal functionality and safety.
• Develop maintenance schedules, ensuring adherence to protocols and manufacturer's guidelines for regular inspections, software updates, and component replacements.

Documentation and Reporting:

• Maintain meticulous records of Level 1 troubleshooting procedures, data collection findings, and maintenance activities performed on the buses.
• Generate detailed reports outlining identified issues, recommended solutions, and actions taken for each maintenance task or diagnostic analysis.

Operational Coordination:

• Coordinate operational activities including scheduling, resource allocation, and route optimization for the AV fleet.
• Collaborate with engineering, operations, and management teams to facilitate coordination between technical tasks and operational requirements.
• Propose and implement improvements to enhance operational efficiency, reliability, and customer satisfaction.

Any other additional duties not listed above but deemed appropriate for product and operations support by project basis.

Qualifications:

• Minimally a diploma in relevant Engineering field with equivalent work experience, with a focus on mechatronics preferred
• Familiarity with Unix (Ubuntu) environment
• Good understanding of Class 4 autonomous buses equipped with SAE Level 4 autonomy, including sensor technology, control systems, and software.
• Proficiency in Level 1 troubleshooting, data collection methodologies, and coordination of maintenance activities for Class 3 and 4 vehicles and electronics equipment
• Excellent communication skills and the ability to collaborate effectively with technical teams and stakeholders.
• Dedication to meticulous documentation and reporting practices.
• A Class 3/4 driving license will be an added advantage.

Experience:

• 3-5 years of hands-on experience in service engineering, technical support and/or operations coordination. Prior experience related to Class 3 and 4 vehicles will be an advantage.

We are seeking a highly skilled AI Engineer specializing in Large Language Model to contribute to the development of a scalable and optimized South-East Asia foundation language model. In this role, you will collaborate with multi-region teams, adopting the advanced AI technologies and applying AI models and strategies to enhance business models. Your primary focus will be on following and crafting the advanced AI algorithms for South-East Asia language in the ecommerce domain.

Job Description:

• Contribute to the research and implementation of pre-training and alignment algorithms include ultra-large-scale multilingual pre-training technology, Mixture-of-Experts model training, Instruction Pretraining, SFT, and RLHF.
• Contribute to the explanation and safety improvement of AI, especially in trustworthy Large language models.
• Follow the frontier technologies and make comparisons about the advanced technologies to apply in business scenerios.
• Conduct experiments to test the performance of different AI models, identifying areas for improvement and exploring new directions for enhancement.
• Work collaboratively in a team environment, applying expertise in statistics, scripting, and relevant programming languages.

Requirements:

• Doctorate degree in Computer Science, Information Technology, Programming & Systems Analysis, or other related disciplines
• Excellent coding skills, data structure and basic algorithm skills, proficiency in Python/Pytorch coding.
• 4 years of research experience in basic principles and training methods of industry-leading LLM (such as GPT, LLaMA).
• Have research experience in text generation or dialogue systems
• Excellent problem analysis and solving skills, able to deeply solve problems in large model training and application.
• Good communication and collaboration skills, able to explore new technologies with the team and promote technological progress.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Product area

Google Cloud accelerates every organization’s ability to digitally transform its business and industry. We deliver enterprise-grade solutions that leverage Google’s cutting-edge technology, and tools that help developers build more sustainably. Customers in more than 200 countries and territories turn to Google Cloud as their trusted partner to enable growth and solve their most critical business problems.

Additional job description

The Google Cloud Platform team helps customers transform and build what's next for their business — all with technology built in the cloud. Our products are developed for security, reliability and scalability, running the full stack from infrastructure to applications to devices and hardware.

In this role, you will be helping our customers, developers, small and large businesses, educational institutions and government agencies, see the benefits of our technology come to life. You will be understanding the needs of our customers and helping shape the future of businesses of all sizes use technology to connect with customers, employees and partners.

You will be the technical expert and trusted advisor for our customers, helping them design, deploy, and optimize AI solutions using cutting-edge hardware and software. Your focus will be on Graphics Processing Units (GPUs), accelerators (including Field-programmable Gate Array (FPGA) and Application-Specific Integrated Circuit (ASIC)), and Google Tensor Processing Units (TPUs). You will work closely with sales, product management, and engineering to ensure our customers achieve maximum value from their AI investments. You will be responsible for scaling and helping accelerate GCP AI Infrastructure business growth.

Qualifications

Job responsibilities

• Serve as a trusted advisor to customers, helping them in understanding and incorporate AI accelerators into the overall cloud strategy by recommending migration paths, integration strategies, and application architecture that incorporate Google Cloud AI optimized infrastructure.
• Demonstrate how Google Cloud is differentiated, highlighting the power of accelerators by working with customers on proof-of-concepts, demonstrating features, optimizing model performance, profiling, and bench-marking.
• Build repeatable assets to enable other customers and internal teams.
• Influence Google Cloud strategy at the intersection of infrastructure and AI/ML by advocating for enterprise customer requirements.
• Lead business and Workload acceleration on AI Infrastructure products and solutions for GCP.

Minimum qualifications

• Bachelor's degree in Computer Science, Mathematics, a related technical field, or equivalent practical experience.
• 10 years of experience with cloud infrastructure.
• 5 years of experience in a technical role focused on AI infrastructure or related areas.
• Experience building and operationalizing machine learning models.
• Experience with GPU programming (CUDA, OpenCL) and optimization techniques.

Preferred qualifications

• Experience with high-performance computing (HPC) environments and contributions to open-source projects related to AI or infrastructure.
• Experience training and fine-tuning large models (i.e., image, language, segmentation, recommendation, genomics) with accelerators.
• Experience with performance profiling tools (i.e., Tensorflow profiler, PyTorch profiler, Tensorboard).
• Experience designing/architecting large-scale infrastructure farms for specialist AI use cases.
• Experience with running MLPerf benchmarks, distributed training and optimizing performance versus costs.
• Excellent communication and presentation skills.

JOB DESCRIPTION

This job focuses on software development for Software as a Medical Devices. System engineer will be working closely with Project Managers and project teams to ensure the software as a medical device product management Lifecyle is followed thoroughly.

• Support project manager to plan and execute Software as a Medical Device (SaMD) projects including AI applied to healthcare.
• Support technical team in product development, design verification and validation of medical devices including software as medical device.
• Prepare, design and development documentation by working together with software developers, quality and regulatory personnel.
• Prepare project agreements, procurement specifications and technical documents.
• Follow-up on project milestones.

JOB REQUIREMENT

• Preferred to have one year of experience in software development or medical device product development.
• Educational background of computer engineering or bio medical engineering.
• Knowledge in software development, experience in software development environment will be an added advantage.
• Knowledge / willingness to learn the ISO 13485 documentation practices and drive project teams for adherence.
• Good follow up skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

What you will do:

The Systems Applications Engineer, National Accounts will Provides sales support to the engineering and sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Oversee the application engineering team, providing configuration, enhancement, and support for technical documentation and presentations to clients.
• Customize and introduce new features to Metasys software and in-house developed applications based on end-user requirements.
• Design and construct new applications tailored to meet customer specifications and needs.
• Guide application engineers in writing and executing tests on complex programming, troubleshooting issues as they arise, and supporting product launches.
• Provide technical support and troubleshoot application issues while performing tests on complex programming and assisting in product launches.
• Assist the application manager in process improvements to enhance productivity and efficiency.
• Collaborate with system integrators (SI) to monitor their performance with quality assurance/quality control checks and ensure completion sign-off.
• Manage vendor relationships, including scoping application services and reviewing deliverables.
• Collaborate as part of a design, engineering, and operations team.
• Knowledge of ACMV and controls associated with Johnson Controls Metasys will be advantageous.
• Deliver customer support by responding to technical queries with detailed analyses of building management systems, tooling costs, and design/process improvements to meet all customer needs.
• Collaborate with engineering, sales, and operations teams to understand standard fabrication techniques, composite materials, and customer demands to develop design details.
• Create and present technical engineering information based on customer proposals, including 3D representations of products and tooling.
• Prepare cost estimates by analyzing blueprints, customer documents, and consulting with engineers and technical personnel.
• Conduct conceptual designs of composite components and assemblies to support proposals.
• Generate accurate CAD models of components and assemblies.
• Develop detailed bills of materials for proposals.

What we look for:

• Bachelor's Degree in Engineering with a minimum of 5 years of relevant experience in Access, Intrusion, and Video Management systems
• Demonstrate strong verbal and written communication skills, including the ability to efficiently articulate technical subject matter
• Good communication skills, with an ability to express and understand complex technical concepts.
• Experience of working with globally distributed teams & matrixed environment

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Responsibilities:

• Handles the technical aspects of patch deployment and system updates.
• Ensures that patches are tested, scheduled, and deployed with minimal disruption to system availability.
• Responsible for testing patches in a controlled environment before deploying them to production systems.
• Verify that patches do not introduce new issues or conflicts.
• Regular scanning and analysis.
• Scheduled and controlled patch deployment.
• Perform risk-based prioritization.
• Rigorous testing in a controlled environment.
• Collaborate with customer’s IT team for user acceptance testing.
• Emergency response for critical vulnerabilities.
• Understand the customer’s infrastructure and become familiar with the Customer’s infrastructure environment and support processes and procedures to ensure supporting customer with proper SLAs.
• Troubleshoot production issues to fix any user related issues and work with principal vendors and customer to provide the resolution within the proposed timelines.
• Be available for customers’ questions in assisting their needs to support any issues and monitor customer’s environment leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.

The Individual and their Experience:

• Linux OS patching
• MySQL system and patching knowledge
• MSSQL system and patching knowledge
• Maria DB system and patching knowledge
• Eagerness and willingness to pick up & adapt new skills and automation.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernizing key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernization.

Logicalis Group has an annualized revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

Interested applicants please submit your application with your expected salary and notice period to be considered for the role.

We regret that only shortlisted candidates will be notified.

As part of any recruitment process, we collect and processes personal data relating to job applicants. We are committed to being transparent about how we collect and use that data and to meeting our data protection obligations. By applying to this post and sending us your resume, you agree to the collection, use and/or disclosure of your personal data in the manner as set out in our Data Protection Notice for Job Applicants which can be found

Logicalis is committed to protecting your privacy.

Click below to view the data protection notice.

https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf.

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

In 2021 the Singapore Hybrid-Integrated Next-Generation micro-Electronics (SHINE) Center was established.

One of the projects in SHINE focuses on developing the technology and demonstrating Radio Frequency (RF) and microwave applications on flexible substrates.

As part of this project, we have a position for a research engineer with proven knowledge and experience in researching, designing, and testing of microwave circuits and subsystems.

Qualifications

• Possess a Bachelor or Master degree in Electrical Engineering
• Experience in the simulation and design of microwave circuits and subsystems.
• Experience with tools such as ADS and HFSS.
• Experience with measurement of microwave circuits using VNAs.
• Able to work independently and in a team.
• Open to fixed-term contract.

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Tasks:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• ecome the technical Expert for the respective machine specialization.
• ● Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Materials Engineering / Material Sciences / Chemistry / Chemical
• Min 2 years of relevant work experience in Thin Film CVD Equipment in the semiconductor industry
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Provide 24x7 support for all Diffusion Wet Equipment Tools and Issues

Task:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach junior engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 7 years of relevant work experience in Diffusion Wet / Wet Etching Equipment
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Purpose:

To support the Program Manager in strengthening existing customer relationships and ensuring smooth day-to-day operations, which include New Product Introduction (NPI), Order Administration, BOM Management and Planning.

Job Description:

1. Customer Relationship Management

• Build and maintain strong relationship with customers by identifying and assessing customers’ current and future needs
• Timely fulfilment of customers’ orders or communication of schedule revision
• Liaise with internal departments to ensure orders will be fulfilled on time
• Respond to all customers’ inquiries promptly
• Prepare and provide reports and proposals to customers as required
• Support customers’ audits and visits when necessary

2. New Product Release

• Responsible for ECN (Engineering Change) and new BOM (Bill of Material) management, which includes item master creations.
• Ensure that all ECNs and BOMs are cross checked before releasing it and any ad hoc amendment to the BOM through internal ECN or waiver
• Manage FAA (First Article Approval) submission and approval.
• Define Production Routing Guide for manufacturing
• Ensure packing handling units (carton & palletization) are defined accordingly
• Maintain customer part numbers in ERP system
• Manage EOL (End of Life) of products.
• Handles new customer requirement that involves ERP system update and UAT
• Work together with manufacturing engineer & production to define the relevant process or packing instruction
• Maintain the relevant documents pertaining to BOM management, which includes work instruction, sticker placement
• Interface customer with respect to NPR, ECN, and FCS launch management
• Prepare samples for customer review/approval
• Prepare and participate in customer audit on new SKUs or artwork
• Create BOM structure for all new product release from sketch and maintain item, BOM, ECN and void in customer's SAP as per customer requirements

3. Report and Masterlist Tracking

• Ensure FAA Tracking List and BOM masterlist are well maintained
• Prepare launch tracking report
• Prepare QBR data on relevant sections
• Prepare weekly/ monthly reports as requested by customers and management

4. Order Processing

• Acknowledge and process sales orders, coordinate with various departments and related parties to fulfil order
• Prepares samples, price estimates and quotations within customer’s expectations and timeframe
• Creates work orders for production and replacement work orders if necessary
• Ensure prompt billing of invoices and assist in overdue payment collection
• Manage customer’s product content effectively

5. Material Planning

• Plan and make purchase requisition for necessary materials to ensure materials availability in meeting production needs while minimizing inventory holding/costs
• Manages inventory level for raw materials, work-in-progress and finished goods
• Analyse order trends and prepare forecast schedule to material planner

6. Productivity and Innovation

• Identify potential improvement initiatives
• Implement feasible improvement initiatives to enhance effectiveness, efficiency and/or economy

Job Requirements:

• Diploma/Degree in Business Administration, Supply Chain Management or other relevant fields
• 1 – 2 years of experience in operations/supply chain environment (Program Administrator)
• 3 – 5 years of experience in operations/supply chain environment (Senior Program Administrator)
• Strong interpersonal skills with good presentation and communication abilities
• Independent and proactive, with strong customer service orientation.
• Experience in printing and packaging industry will be an added advantage
• Knowledge in MRP and SAP systems will be added advantage

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Overview

The future of technology is full of amazing possibilities that started in semiconductor manufacturing plants. Autonomous driving, drones, the Internet of Things – all of it is possible because of the breakthroughs in semiconductor manufacturing. From large dust-free factory to fully automated machines, this unmanned factory is not a dream but a testament of UMC daily operation in our contribution towards the future of technology. Join us and be part of UMC Smart Factory in managing complex production processes which allow you to experience first-hand on the operation of state-of-the-art factory and accelerate your growth!

Responsibilities

• Manage the production metrics of fully automated production lines
• Predictively identify and address possible production bottlenecks in a timely manner
• Coordinate resources to achieve daily production goals
• Lead in continuous improvement projects to increase productivity, staff operation efficiency and quality

Qualifications

• Possess at least a Bachelor's Degree in Electronic Engineering, Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering, Industrial Engineering, or Computer Science.
• At least 2 years of relevant working experience in semiconductor industry foundry
• Adept in project management as well as a strong sense of commitment
• Possess good communication skills in coordinating between relative parties
• Is self-demanding and committed to innovative solutions to complete tasks
• Proficiency in Excel(VBA) & SQL or Tableau for data analysis
• Able to commit shift work
• On duty required on weekend and Holiday
• Standby 24-hour for Fab Operation

Job Summary

We seek an experienced and motivated Software Quality Engineer to join our forward-thinking tech team. In this role, you'll ensure our platform is reliable and meets high-quality standards. This position allows you to work across teams, shaping and implementing advanced QA processes that support scalable, reliable, and innovative solutions

Responsibilities:

Test Strategy and Planning

- Define and lead comprehensive QA strategies, covering all phases of the software development lifecycle.

- Develop, manage, and execute manual and automated test plans, cases, and scripts to ensure thorough testing.

Automation and Tooling

- Lead the development of automated testing frameworks using Cypress, Playwright or any automation tool for end-to-end test coverage.

- Drive platform scalability by implementing performance and load tests using tools like Gatling, K6, or Jmeter.

Quality Assurance

- Perform contract testing to ensure smooth interaction between microservices.

- Lead regression testing efforts for bug fixes and new features to maintain overall quality.

- Oversee the end-to-end testing pipeline, resolving issues promptly to avoid any delays.

Cross-Functional Collaboration

- Work closely with product managers, developers, and DevOps engineers to meet project requirements and deliver high-quality software.

- Contribute to agile team processes, including sprint planning and other ceremonies, with valuable QA insights.

- Coordinate with QE teammates to prepare and lead weekly deployments, ensuring smooth execution.

Issue Resolution and Reporting

- Accurately document, track, and report software defects, conducting root cause analysis as needed.

- Provide timely and detailed reports on QA activities, testing outcomes, and relevant quality metrics.

Requirements:

- Expertise in software quality assurance, with a strong focus on automation testing (e.g., Cypress, Playwright).

- Demonstrated experience with performance testing tools such as Gatling and Autocannon.

- Proficient in JavaScript (TypeScript) or Java

- Familiar with frontend and backend technologies (e.g., ReactJS, ExpressJS, Gin-gonic), as well as cloud platforms (AWS, Docker, Kubernetes).

- Knowledgeable in CI/CD tools (e.g., GitLab, ArgoCD) and relational databases (MySQL, PostgreSQL).

- Solid understanding of REST and GraphQL APIs, JWT for authentication, and search technologies like Elasticsearch.

- Exposure to additional testing tools and caching systems like Redis.

- Experience with logging and monitoring platforms such as Splunk or OpenSearch.

Qualifications

- Bachelor’s degree

- Strong problem-solving, analytical, and communication skills.

Job Summary

We seek an experienced and motivated Senior Software Quality Engineer to join our forward-thinking tech team. In this role, you'll ensure our platform is reliable and meets high-quality standards. This position allows you to work across teams, shaping and implementing advanced QA processes that support scalable, reliable, and innovative solutions.

Responsibilities:

Test Strategy and Planning

- Define and lead comprehensive QA strategies, covering all phases of the software development lifecycle.

- Develop, manage, and execute manual and automated test plans, cases, and scripts to ensure thorough testing.

Automation and Tooling

- Lead the development of automated testing frameworks using Cypress, Playwright or any automation tool for end-to-end test coverage.

- Drive platform scalability by implementing performance and load tests using tools like Gatling, K6, or Jmeter.

Quality Assurance

- Perform contract testing to ensure smooth interaction between microservices.

- Lead regression testing efforts for bug fixes and new features to maintain overall quality.

- Oversee the end-to-end testing pipeline, resolving issues promptly to avoid any delays.

Cross-Functional Collaboration

- Work closely with product managers, developers, and DevOps engineers to meet project requirements and deliver high-quality software.

- Contribute to agile team processes, including sprint planning and other ceremonies, with valuable QA insights.

- Coordinate with QE teammates to prepare and lead weekly deployments, ensuring smooth execution.

Issue Resolution and Reporting

- Accurately document, track, and report software defects, conducting root cause analysis as needed.

- Provide timely and detailed reports on QA activities, testing outcomes, and relevant quality metrics.

Mentorship and Leadership

- Mentor junior QA engineers, building a strong team culture focused on quality and continuous improvement.

- Stay up-to-date with emerging QA tools and methods, bringing new ideas to the team.

Job Requirements :

- Expertise in software quality assurance, with a strong focus on automation testing (e.g., Cypress, Playwright).

- Demonstrated experience with performance testing tools such as Gatling and Autocannon.

- Proficient in JavaScript (TypeScript) or Java

- Familiar with frontend and backend technologies (e.g., ReactJS, ExpressJS, Gin-gonic), as well as cloud platforms (AWS, Docker, Kubernetes).

- Knowledgeable in CI/CD tools (e.g., GitLab, ArgoCD) and relational databases (MySQL, PostgreSQL).

- Solid understanding of REST and GraphQL APIs, JWT for authentication, and search technologies like Elasticsearch.

- Exposure to additional testing tools and caching systems like Redis.

- Experience with logging and monitoring platforms such as Splunk or OpenSearch

Qualifications:

- Bachelor’s degree

- Strong problem-solving, analytical, and communication skills.

- Demonstrated leadership skills and comfort working in a fast-paced, agile environment.

*Join Our Team: Outdoor Service Engineer*

Are you a tech-savvy problem solver with a passion for the great outdoors? AV Media Pte Ltd is seeking an enthusiastic and skilled Outdoor Service Engineer to join our dynamic team.

*About Us:*

AV Media Pte Ltd is a leading provider of audiovisual solutions, serving prestigious clients including MOE schools and various government agencies. We pride ourselves on delivering top-notch services and innovative solutions.

*Position: Outdoor Service Engineer*

*Key Responsibilities:*

- Provide maintenance and support for audiovisual equipment at client locations.

- Troubleshoot and resolve technical issues efficiently and effectively.

- Ensure customer satisfaction by delivering excellent service.

- Collaborate with the team to improve service quality.

*Requirements:*

- Technical diploma or equivalent in a related field.

- Experience in audiovisual equipment maintenance and troubleshooting.

- Strong problem-solving skills and attention to detail.

- Excellent communication and interpersonal skills.

- Ability to work independently and manage time effectively.

- Valid driver's license.

*Benefits:*

- 5-day work week.

- Company-provided vehicle for service visits.

- Comprehensive training program.

- Attractive salary and benefits package.

- Opportunity to work with prestigious clients and advance your career.

*How to Apply:*

If you’re ready to take on an exciting challenge and be part of a forward-thinking company, send your resume and a cover letter to [email protected] with the subject line "Application for Outdoor Service Engineer."

Join us in making a difference through cutting-edge audiovisual solutions!

Roles & Responsibilities:

• Establishing work procedures, instructions and monitor performance and control of workmanship towards quality.
• Ensure sub-contractors and suppliers comply with project’s QA/QC requirement and manage project quality to ensure compliance to codes, standards and regulations.
• Carry out audit processes, review procedures, and ensure compliance with industry standards.
• Carry out various inspections and tests on the materials, products and components during various stages and completion of construction.
• Identify areas for process improvements, implement best practices and ensuring ongoing compliance.
• Maintain records of inspection results, deviations and corrective actions taken to ensure traceability and accountability.
• Initiate corrective actions to resolve the issue and prevent recurrence when defects or non-conformities are found.
• Review client’s complaints relating to QA/QC matters.
• Preparing and maintaining detailed reports on quality performance.

Requirements:

• ITE / Diploma in engineering or equivalent.
• At least 5 years of working experience in the local construction industry.
• Good communication and interpersonal skills.

The Web Development Engineer will be responsible for the design, development, and maintenance of web applications. This role requires a strong understanding of web technologies, programming languages, and software development methodologies. The ideal candidate will be a passionate developer with a keen eye for detail and a commitment to delivering high-quality code.

Responsibilities:

• Front-end Development:Develop user-friendly and responsive web interfaces using HTML, CSS, and JavaScript.
  Utilize front-end frameworks (React, Angular, Vue.js) to build efficient and scalable applications.
  Optimize website performance and user experience.
  
• Back-end Development:Develop server-side logic and APIs using programming languages like Python, Ruby, or Node.js.
  Integrate with databases (MySQL, PostgreSQL, MongoDB) to store and retrieve data.
  Implement security measures to protect web applications from vulnerabilities.
  
• Full-Stack Development:Work on both front-end and back-end development to deliver end-to-end solutions.
  Collaborate with designers and other developers to create seamless user experiences.
  
• Testing and Debugging:Write unit and integration tests to ensure code quality and functionality.
  Debug and troubleshoot issues to maintain application stability.
  Conduct performance testing to identify and optimize bottlenecks.
  
• Deployment and Maintenance:Deploy web applications to production environments using deployment tools and processes.
  Monitor application performance and address any issues that arise.
  Implement regular updates and security patches.
  

Pre-Requisites :

• Bachelor's degree in Computer Science, Electrical Engineering, or a related field.
• 4+ years of experience in web development.
• Strong proficiency in HTML, CSS, and JavaScript.
• Experience with front-end frameworks (React, Angular, Vue.js) and back-end languages (Python, Ruby, Node.js).
• Knowledge of database technologies (MySQL, PostgreSQL, MongoDB).
• Understanding of web servers (Apache, Nginx) and application servers.
• Experience with version control systems (Git).
• Strong problem-solving and debugging skills.
• Ability to work independently and as part of a team.

Preferred Qualifications:

• Experience with cloud platforms (AWS, Azure, GCP).
• Knowledge of DevOps practices and tools (Jenkins, Docker, Kubernetes).
• Experience with testing frameworks (Jest, Mocha, Chai).
• Understanding of web security best practices.

The Snr Systems Engineer manages the systems administration function and leads the organisation's system projects and environments. He/She focuses on setting goals and priorities and on mentoring and coordination as well as providing technical leadership. He/She plans and oversees systems upgrades and migrations and ensures systems are up-to-date with the latest patches and are coherent across the organisation. He/She directs the development and maintenance of technical documentation.

He/She possesses strong leadership and communication abilities, and is able to set realistic goals and implement appropriate plans to guide the team toward achieving those goals. He/She is able to address multi-faceted issues effectively and in a collaborative manner including across departments. Set system administration processes

Role and Responsibilities:

Set system administration processes

• Establish goals and priorities, design, planning, day-to-day operation, maintenance, and advanced troubleshooting of systems

• Align system administration with overall strategic IT service direction and business needs

• Assist with the development of business case justifications and cost/benefit analyses for spending and initiatives

• Anticipate internal and/or external business challenges and/or regulatory issues

• Develop policies, procedures, and controls to ensure system security

Develop New Systems

• Partner with stakeholders to recommend innovative and automated approaches for system administration

• Define systems requirements for new technology implementations

• Prepare for system expansion by studying plans and requirements

• Oversee the design, maintenance and implementation of the systems

• Prioritise tasks to ensure projects are implemented in accordance with project plans and budgets

Optimise Systems Performance

• Recommend process, product or service improvements, resource optimisation and cost savings

• Oversee hardware and software upgrades

• Recommend new technologies, methodologies, systems or opportunities for cost savings, security and service quality improvement

Manage Teams

• Oversee team management including budgets, forecasting, work allocations and staffing

• Develop staff through ongoing coaching, mentoring and career discussions

• Define common goals, direction and accountability among staff

• Drive effective performance management practices within department in accordance with company policies and procedures

Requirements / Qualifications

• Degree in Information Technology or related

• Candidates must have at least 6 years of hands-on experience in Linux with ability to work with the project team in implementation projects as well as perform system administration activities for Linux systems. Knowledge in SAP will be advantageous but not required.

• At least 6 - 8 years’ experience in developing, implementing and maintaining IT systems

Assist with infrastructure planning and design

• Assist with the planning and design of infrastructure systems
• Assist with the documentation of infrastructure design and planning activities and decisions

Support infrastructure operations

• Perform infrastructure operations activities such as installations of infrastructure systems according to design specifications
• Align infrastructure operations with agreed service agreement standards

Maintain infrastructure

• Perform activities related to ongoing maintenance of infrastructure
• Assist with the implementation of agreed infrastructure changes and maintenance routines

Optimise infrastructure performance

• Perform ongoing tuning and optimisation of infrastructure hardware and software components such as updates and upgrades
• Participate in infrastructure development activities
• Assist with infrastructure testing and implementation
• Gather performance and data usage statistics for capacity planning and reporting
• Assist with piloting of new tools, technologies, and/or processes

Resolve incidents

• Perform problem/issue identification and resolution
• Assist with simulation of user problems to resolve operating difficulties
• Follow up with users to ensure problem has been resolved
• Recommend system modifications to reduce user problems

Requirements

• At least 6-8 years' of experience in the Network Management and Support Services, Unified Communication, Wirecenter maintenance
• Strong knowledge and experience in supporting Cisco Switch, Cisco Router, Fortigate Firewall, Palo Alto Firewall, ClearPass NAC, F5 VPN, IPS, WLC, Access Point and VSS/VLAN Architectures.
• Network Support in the areas of wireless, wired, VPN
• Network certifications eg CCNE, CCNA