Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

This project aims to investigate the performance of cementitious materials and 3D printed concrete against ballistic impact. The researcher will be required to cast and fabricate the various cementitious materials and 3D printed concrete, prepare the logistics and perform the relevant ballistics tests.

Job Requirements

The research fellow should have at least 3 years relevant experience in the following two areas:
• 3D concrete printing;
• Conducting laboratory ballistic tests.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Responsibilities:

Project Design and Development:

• Lead the design process for civil/structural engineering aspects of deep excavation projects.
• Develop detailed geotechnical design plans, ensuring compliance with relevant codes and regulations.
• Conduct engineering analyses, including stability assessments and structural integrity evaluations.

Technical Leadership:

• Provide technical guidance and mentorship to junior engineers and design teams.
• Review and approve design calculations, drawings, and specifications.
• Troubleshoot and resolve complex design and construction issues.

Stakeholder Collaboration:

• Collaborate with multidisciplinary teams, including architects, contractors, and project managers.
• Liaise with clients, regulatory authorities, and other stakeholders to ensure project requirements and standards are met.

Quality Assurance and Compliance:

• Ensure that designs meet local regulations, safety standards, and best practices.
• Participate in audits, inspections, and peer reviews of design work.

Project Management:

• Manage timelines, budgets, and resources for design deliverables.
• Support the preparation of technical reports and documentation.

Job Requirements:

• Bachelor’s or Master’s degree in Civil/Structural Engineering or a related discipline.
• Recognized professional engineering qualifications by the Professional Engineers Board of Singapore.
• A minimum of 10 years of relevant experience in civil/structural engineering, with at least 5 years focused on designing geotechnical works for deep excavation projects.
• Proven expertise in handling projects of a similar size and complexity.
• Strong knowledge of geotechnical design principles, soil mechanics, and structural analysis.
• Proficiency in relevant design software and tools (e.g., Plaxis, AutoCAD, STAAD.Pro).
• Excellent communication, leadership, and problem-solving skills.

Preferred Qualifications:

• Chartership or equivalent professional accreditation (e.g., PE, CEng).
• Familiarity with Singapore’s construction and regulatory environment.
• Experience with risk assessment and mitigation for geotechnical designs.

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering centre serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

As a Software Engineer in the Thales Embedded Product Development Team, you will participate in the design, implementation, validation and deployment of embedded applications products to the major OEM smartphone customers.

Responsibilities:

• Develop, validate and deploy new software components (for example advance software security mechanism and next generation IoT connectivity protocols) for embedded operating systems targeted for mobile and IoT devices, in applications such as mobile payment, digital identity and IoT connectivity
• Participate to the development of next generation operating systems for future devices
• Being in agile development environment to work closely within team and multiple teams around the world to build great products exceeding customer expectations
• Contribute to continuous product and development methodology improvement

Requirements:

• Proficient in C/Java programming languages
• Degree in Electrical/Electronics/Computer Engineering or related fields
• Team player with good communication and collaborative skills, ability to work independently and proactively.
• Knowledge of embedded technology/ecosystem, software security or Javacard will be a plus
• Prior experience as software engineer will be a plus

Other information:

• Working Location: One North
• Working Hours: Monday - Friday, 9am - 6pm

Responsibilities:

• Coordinating, planning and conducting the project plan
• Project formulation and monitoring progress and schedule
• Effective communication and co-ordination between project participants
• Attend site meeting, inspect, monitor and report project progress.
• Submit and update monthly project status
• Perform other duties or tasks as assigned by immediate superior or Project Manager

Requirements:

• Degree in Civil/Structural Engineering or its equivalent
• At least 3 years relevant working experience as Project Engineer in main contractor office
• Proficient in MS Office Word, Excel and Project Scheduling software
• Good communication skills

Project Client Management:

• Excellent execution of project towards company objectives and client satisfaction.
• Good understanding of job nature
• Monitor progress of project and update project status to Superior & Finance Department
• Being efficient & manage project efficientcy

Technical Competencies:

• Good understanding of local code requirements
• Good engineering knowledges in relation to company services offered (eg.M&E professional services, Green Mark Related work etc.)

REQUIREMENTS :

• Candidate must possess at least Diploma/Bachelor's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• Required language(s): English
• At least 2 Year(s) of working experience in an M&E Consulting firm.
• Knowledge in design and building project and relevant code of practice.
• Proficiency in AutoCAD/BIM software is an added advantage.
• Able to work as a team, assertive , independent and proactive.
• Candidate without relevant working experience but with good interpersonal skills will be considered.

Interested candidates please submit updated resume via "APPLY NOW".

Please include your availability date and expected salary in your resume.

We regret only shortlisted candidates will be notified.

Job Summary

Responsible for the analysis and preparation of specifications and construction drawings, design documents for process and industrial plants in accordance with project specification schedule and customer requirements.

Duties & Responsibilities

• Responsible for field instrument and control system design work.
• Able to lead small/medium size project within budgeted MH, cost and project schedule.
• Prepare and review field instruments, Analyzer, Control Systems (DCS, ESD, F&G etc) specification, requisition, TBE, vendor document review.
• Prepare construction drawings such as Location layout, hook-up, cable routing, loop diagram etc. based on project specifications.
• Generate specification requisition for various process instruments, evaluate and select suitable instruments for required process control/monitoring application.
• Preparation of technical proposals (e.g. TBE) and cost estimation for tender projects.
• Preparation Vendor’s Document Review, BMBQ, Man-hour estimation and related.
• Engineering Support at site, attend Field Instrument & Control Inspection, FAT at vendor’s workshop and SAT & Loop Check at site.
• Perform other functions that may be assigned by superior.

Requirements

• Bachelor’s degree in Chemical Engineering, Electrical and Electronic Engineering or Instrument and Control Engineering.
• 8 years’ experience in instrument and control system design work.
• Knowledge and experience in Field Instrument Engineering as well as Control System, e.g. DCS, ESD, F&G.
• Able to work at construction site to support construction, pre-commissioning and commissioning activities.
• Good interpersonal and communication.

About Us!

The mission of Housing & Development Board (HDB) is to provide affordable, quality housing and a great living environment where communities thrive. To achieve its mission, HDB aims to be data-driven to the core and adopt evidence-based decision making in developing better housing policies service, improving service delivery and optimising operations.

What Will You Do?

As a data engineer, you will play a key part in helping HDB begin its journey to be data-driven to the core. In this role, you will assume the following responsibilities:
• Create and maintain data architectures that meets the needs of HDB.
• Build and maintain data platforms required for storage, extraction, transformation, and loading of data from a wide variety of data sources.
• Improve discoverability and distribution of analytical data to data analysts and data scientists.
• Implement best practices in data security throughout the lifecycle of analytical data.

You will be a Great Fit if you:

• Background in Information Systems (IS), Computer Science or related field in a reputed institution.
• 3 years relevant experience in designing and maintaining data platforms such as data lakes, data warehouses and the associated data pipelines is preferred.
• Proficient in creating and maintaining complex data pipelines using tools such as Microsoft SQL Server Integration Services (SSIS).
• Knowledge of data platforms such as Spark, Flink, Kafka, SQL and NoSQL databases, Airflow
• Knowledge of the latest developments in data engineering and best practices in data management.
• Knowledge of analytical tools is an advantage e.g., SAS Viya, Tableau, PowerBI, Amazon SageMaker, ArcGIS Pro
• Knowledge in cloud computing, design and development is an advantage e.g., AWS, Azure, GCP
• Knowledge of cloud technologies in data platforms is a plus e.g. Snowflake, AWS Redshift, Google BigQuery, Azure Synapse.
• Strong project management and organization skills.
• Possess an eagerness to learn and impart new skills.
• Be a good team player.

Good to Have:

- Great Attitude to bring the best out our team
- Team Player; we work together as a team
- Possess an eagerness to learn and impart new skills
- Autonomous & Take ownership

Fresh graduates are welcomed.

Successful candidates will be offered a 1+1 year contract in the first instance. Conversion to perm is dependent on good performance.

Find out more about a career with HDB at www.hdb.gov.sg/cs/infoweb/about-us/careers

Please apply for the job through the Careers@Gov job portal as linked:

https://www.careers.hrp.gov.sg/sap/bc/ui5_ui5/sap/ZGERCFA004/index.html#/JobDescription/15488252/f7e66340-f414-1edf-b4b0-355f29ab3387

Driven by the passion to improve quality of people’s lives, WS Audiology continues to grow as market leader in the hearing aid industry. With our commitment to increase penetration in an underserved hearing care market, we want to accelerate our business transformation in order to reach more people, more effectively.

We are hiring a Mechanical Design Engineer to be a part of our Behind The Ear (BTE) Development team.

What you will do

Design Engineer for new full BTE Hearing Aid projects:

• Design, develop and validate BTE Hearing Aids
• Implement new technologies or concepts into BTE Hearing Aid design
• Utilize various tools of specialization (CREO/ DFM/ DFMEA/ Tolerance Analysis/ Simulation etc.) to design, validate and improve existing designs
• Create and maintain BOM

Design Engineer for new Forefront projects:

• Lead forefront projects to ensure enhancement of technology for future hearing aid generations
• Perform forefront ideas/concepts with suppliers and/or Institutions
• Analyze competitor's product to learn good practices/design

Product Maintenance and support:

• Performs technical analysis related to process/design problems
• Supervise and follow up on support activities (Trial runs, FA approval, etc.) for timely processing of ECRs/ECOs

What you bring

• Bachelor's degree in Mechanical Engineering
• 2-5 years of relevant working experience designing plastic/metal/rubber parts in product design
• Experience in Tolerance Analysis, DFM and DFMEA

Who we are

At WS Audiology, we provide innovative hearing aids and hearing health services.

Together with our 12,000 colleagues in 130 countries, we invite you to help unlock human potential by bringing back hearing for millions of people around the world.

With us, you will become part of a truly global company where we care for one another, welcome diversity and celebrate our successes.

Sounds wonderful? We can't wait to hear from you.

WS Audiology is an equal-opportunity employer and committed to creating an inclusive employee experience for all. Regardless of race, color, religion, national origin, age, sex, gender, gender identity, gender expression, sexual orientation, marital status, medical condition, ancestry, disability, military or veteran status we firmly believe that our work is at its best when everyone feels free to be their most authentic self.

About the Role:
Are you passionate about ensuring the delivery of high-quality, impactful solutions? As a QA Engineer, you’ll play a critical role in transforming personalized healthcare by ensuring our cutting-edge AI and telehealth solutions meet the highest standards. Working closely with our Head of Engineering and a dynamic team, you’ll design and execute rigorous testing processes to support the development of game-changing healthcare technology for Asia.

This isn’t just about testing—it’s about building the future of healthcare. From ensuring the scalability of AI-driven relationship management to verifying personalized health insights and tailored treatments, you’ll help redefine what’s possible in telehealth.

Why Join Us?
This is more than just a job—it’s a mission. While there may be trade-offs in compensation, we offer the chance to be part of something transformative. You’ll take ownership of QA processes for impactful projects, working with a passionate team dedicated to using technology and innovation to change lives.

What You’ll Do:

• Review quality specifications and technical design documents to provide timely and meaningful feedback.
• Develop and maintain detailed, comprehensive, and well-structured test plans and test cases.
• Estimate, prioritize, plan, and coordinate quality testing activities across our engineering projects.
• Design and execute manual and automated test cases to validate AI and telehealth solutions.
• Identify, document, and track software defects to resolution, ensuring timely fixes.
• Collaborate with developers and the Head of Engineering to ensure seamless integration of QA processes into the development lifecycle.
• Continuously improve QA processes, tools, and techniques to support scalable, high-quality solutions.

Who You Are:

• You are passionate about delivering high-quality solutions that make a meaningful difference.
• You have experience in developing and executing manual and automated test cases.
• You’re skilled in reviewing technical design documents and creating test plans and cases.
• You’re familiar with QA tools, methodologies, and frameworks.
• You thrive in fast-paced, high-growth environments and enjoy building solutions from scratch.
• You have strong analytical and problem-solving skills and are detail-oriented.
• Experience in healthcare data or applications is a plus but not mandatory.

What We Offer:

• The chance to work on meaningful projects that transform healthcare in Asia.
• A collaborative and innovative team culture where your contributions matter.
• Ownership over impactful QA projects with the freedom to shape testing strategies.
• Flexibility to work remotely with occasional travel across Asia to collaborate with the team.
• An opportunity to join a mission-driven team passionate about making a real difference in healthcare.

Why Join Us?

• Impact: Play a pivotal role in ensuring the quality of transformative healthcare solutions.
• Ownership: Full responsibility over QA processes and the freedom to shape testing methodologies.
• Flexibility: Work remotely, with opportunities for travel across Asia.
• Mission-Driven: Join a team passionate about changing lives through technology and innovation.

Join us, and let’s redefine healthcare together.

The O&M Engineer is responsible for the operation and maintenance (O&M) of all PV systems in our portfolio. He/she shall maintain high system performance standards and promptly address any faults to minimise downtime. The role also includes contributions to customer care, communications design, and contractual matters, aligning with the broader objectives of the organisation.

In addition, the O&M Engineer is expected to adhere to both local and international solar O&M standards, ensuring compliance with best practices and regulatory requirements. He/she should actively identify and integrate technological advancements to enhance the O&M scope, optimise system performance, and reduce downtime.

The O&M Engineer will:

• Conduct detailed diagnostics and troubleshooting for PV system performance issues, ensuring minimal downtime.
• Monitor PV systems and respond to faults and breakdowns.
• Analyse operational data to identify trends, inefficiencies, or potential risks to system performance.
• Supervise and guide technicians during maintenance, repair, and troubleshooting activities.
• Record faults, alarms, and maintenance actions in the company’s internal tracking system.
• Prepare comprehensive maintenance and performance reports for internal stakeholders and clients.
• Plan and implement preventive and corrective maintenance schedules.
• Ensure compliance with local and international solar O&M standards such as SS601, IEC62446 and IEC61724.
• Ensure compliance with safety standards (ISO45001) and quality management protocols (ISO9001) during all on-site activities.

Requirements

• Degree or Diploma in Engineering, preferably Electrical or Renewable Energy.
• 2-4 years of relevant experience in Solar PV or electrical systems.
• Strong knowledge of PV systems, inverters, and related equipment.
• Experience with SCADA systems and performance monitoring tools is a plus.
• Excellent problem-solving skills and the ability to work under pressure.

Deskside/Desktop Support Engineer

We are looking for experienced junior and senior full-time deskside engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences for junior level.
• At least more than 6 years of IT deskside support experiences for senior level.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: West, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Job Responsibilities

• Engage in project engineering of ACMV Systems.
• Manage and lead co-ordination of assigned projects/site & facilities;
• Liaise with clients and consultants on projects;
• Co-ordinate sub-contract works;
• Assist in site administration;
• Cost management of projects to be within budget;
• Preliminary design and budgeting for Design and Build tenders;
• Any other tasks assigned by the management.

Job Requirements

• Minimum 3 years of experience in ACMV works.
• Minimum Diploma in Mechanical Engineering
• Knowledge in AutoCAD drawings
• Possess coordination, problem-solving, leadership skills

Joining Razer will place you on a global mission to revolutionize the way the world games. Razer is a place to do great work, offering you the opportunity to make an impact globally while working across a global team located across 5 continents. Razer is also a great place to work, providing you the unique, gamer-centric #LifeAtRazer experience that will put you in an accelerated growth, both personally and professionally.

Job Responsibilities

• Help create immersive gaming experiences with a focus on innovation and creativity.
• Commit to developing phenomenal products that stand out and make a significant impact in the gaming industry.
• Work closely with cross-functional teams to rapidly prototype, design, and implement innovative ideas and projects.
• Provide development assistance at the system level to other departments as needed, ensuring seamless integration and functionality.
• Generate comprehensive documentation, including technical and functional specifications, to support project development and implementation.
• Participate actively in agile planning sessions, contributing to scope estimation and project planning for team initiatives.

Pre-Requisites

• BS/MS in Computer Science/Engineering or related field.
• 5+ years of software engineering experience.
• Extensive programming experience in C/C++.
• Experienced in developing system applications for Windows/MacOS/Linux/Android.
• Experienced in Driver development on Windows/MacOS/Linus/Android.
• Experienced in complex computation in 3D space.
• Experienced in game engines (Unreal and Unity).
• Strong analysis and problem-solving skills.
• Ability to work independently and collaboratively in a small team.
• Knowledge of game development a plus.
• Is a gamer.

As a key member of the mechanical engineering team, you will work on cross-functional team projects to develop and deliver new and innovative technical solutions for a robotic surgical system. Specifically, you will provide mechanical and mechanism engineering expertise in the R&D of surgical instruments. You will be working on designing mechanisms, structures and integrating actuators, motion components, and sensors to achieve innovative product functionalities.

The challenge for you is to successfully design and develop the surgical instrument in collaboration with other engineering teams, to achieve an efficient operation, reliable and safe product for clinical applications.

Requirements

· Bachelor or Master in Mechanical engineering.

· 5 - 8 years’ experience in the design & development of surgical instrument.

· Experience at least one cycle of product development.

· Able to communicate and write documents in Chinese (preferred).

· Familiar with regulatory and compliance requirements for the development of medical product.

· Strong technical capability in mechanism design and fabrication of precision and micro instruments.

· Strong technical capability to understand designs for mechanical structure and electro-mechanical assemblies.

· Good knowledge of various materials (metal and plastic), coating and manufacturing processes for precision parts.

· Proficient in 3D CAD modelling and simulation software like SolidWorks.

· Good knowledge and experience in GD&T, tolerance stack-up analysis.

· Good knowledge and experience in performing FEA and motion analysis and technical review of mechanism design.

· Able to travel on short notice for short period.

Desirable Traits/Personality

· An analytical problem solver to identify root causes, devise/evaluate/recommend optimal solutions to prevent future issues.

· Strong interests in surgical robotic system and instruments for medical application.

· Able to communicate technical information and build interpersonal relationships with the team members.

· Able to work independently and driven to achieve high standards.

· Intellectual curiosity about new technologies and innovations.

· Creative with critical thinking ability.

· Last but not least, a fun person to work with.

Responsibilities

· Work with cross-functional teams on detailed mechanical design at system level, sub-systems, modules, and components level.

· Support and review critical technical development related to precision mechanical instruments.

· Resolve issues and improve product reliability.

· Ensure the design and functionalities meet user needs, able to meet cost target and quality specifications.

· Perform analytical studies, risk assessment, mechanical verification, and validation.

· Co-ordinate design and fabrication activities locally or with overseas partners.

· As a mentor to junior engineers and enhance their knowledge and skills.

Ensure proper documentation (Design History File) for mechanical design.

Employment Type: Full-time

About the Role:

We are seeking a skilled and proactive IT Level 2 EUCD (End-User Computing Devices) Assistant Specialist to join our dynamic IT support team. In this role, you will be guided to provide second-level technical assistance to ensure seamless operation and optimal performance of end-user computing devices and systems. Your expertise will be crucial in resolving complex technical issues and delivering exceptional service to our users.

Key Responsibilities:

• Assist in Level 2 technical support for end-user devices, including desktops, laptops, tablets, mobile devices, and peripherals.
• Troubleshoot and resolve hardware, software, and connectivity issues in a timely manner.
• Collaborate with helpdesk to escalate unresolved issues and ensure prompt resolution.
• Install, configure, and maintain end-user devices and related software applications.
• Support system upgrades, patches, and new software rollouts for end-user devices.
• Manage and update IT documentation, including FAQs and troubleshooting guides.
• Monitor and address vulnerabilities and compliance issues on end-user devices with other infrastructure teams.
• Provide excellent customer service by effectively communicating technical solutions to non-technical users.

Required Qualifications:

• Minimum 1 years of experience in IT support, specifically with end-user computing devices.
• Good technical knowledge of Windows, macOS, and mobile operating systems (iOS/Android).
• Experience with Active Directory, Office 365 and remote troubleshooting tools.
• Familiarity with endpoint security solutions and system management tools (e.g., SCCM, Intune).
• Strong problem-solving skills and ability to work independently under minimal supervision.
• Excellent communication and interpersonal skills with a customer-focused mindset.

What We Offer:

• Competitive salary and benefits package.
• A supportive and inclusive work environment.
• Exposure to cutting-edge technologies and projects.

How to Apply:

Interested candidates are encouraged to submit their resume and cover letter outlining their qualifications and experience.

Join us in delivering exceptional IT support and driving technological excellence!

Rapsodo Inc. is a sports technology and analytics company that uses computer vision and machine learning to help all athletes maximize their performance. Our proprietary technology applications range from helping golfers of all abilities, including PGA professionals, to optimize their launch conditions, to allowing MLB pitchers to increase the efficiency on their breaking balls. Current partners include all 30 MLB teams, MLB, USA Baseball, Golf Digest, PGA of America, and over 1,000 NCAA athletic departments.

We are seeking a highly skilled and experienced Radar System Engineer to lead the design, development, and validation of advanced radar systems. This role is critical in shaping our radar solutions by architecting cutting-edge systems, developing robust signal processing algorithms, and ensuring seamless integration with RF front-end components. You will play a pivotal role in optimizing system performance, conducting real-world testing, and collaborating with cross-functional teams to drive innovation in radar technologies.

Key Responsibilities:

• Architect and design radar systems, ensuring performance meets technical and operational requirements.
• Develop and validate signal processing algorithms and radar architectures.
• Architect and validate RF front-end systems, ensuring seamless integration with radar systems.
• Conduct testing, debugging, and validation of radar solutions in real-world environments.
• Collaborate with cross-functional teams on system integration, performance optimization, and troubleshooting.
• Perform circuit design and modifications to improve overall radar performance.

Skills & Qualifications

• Master’s degree in Electrical Engineering, RF Engineering, or a related field.
• Strong experience in radar system design, and signal processing.
• Proficiency with radar architecture, including system testing and validation.
• Solid understanding of circuit design principles.
• Ability to work independently and collaborate in cross-functional and diverse teams.
• Strong problem-solving skills and attention to detail.

Preferred Experience:

• Familiarity with industry-standard RF design tools and testing equipment.
• Experience in radar system performance evaluation and optimization.
• Knowledge of various radar technologies and applications.
• Having hands on RF design and validation experience in 24, 60 or 77 GHz is preferred.

If you are excited about the prospect of contributing to a dynamic, innovative, and driven environment while also being able to work independently, we invite you to submit your application.

Datacenter Operations Engineer

The Leaseweb APAC team is growing quickly and looking for talented individuals to join us. Our Data center Operations Team is involved in the daily management of our current 6 data center facilities in the APAC region (Singapore, Japan, Hong Kong and Australia) and we are about to open 3 more data center location in Singapore, Japan and Australia later this year. You will be responsible for the configuration and installation of the servers during the provisioning process in our data center in Singapore, and other data centers in the region as needed. You will also be assisting customers with the installation of network equipment in more complex designs.

Key responsibilities:

• Installation, configuration, relocation, and removal of server equipment at the data center
• The assistance of customers within data centers (for customers with their own racks/servers)
• Upgrade/downgrade of server equipment (memory/hard disks/etc.)
• Replacement of hardware and handling of all relevant administrative matters.
• Testing servers and server equipment in accordance with standards
• Work with remote hands partners within the APAC region to support installation and/or adjustment of servers.

Requirements:

• At least one year of hands-on experience working in a data center with servers
• Knowledge of various operating systems, especially Linux
• Knowledge of Hardware (Servers, Switches, KVM, Hard Drives, Memory etc.)
• Basic network knowledge (adjusting DNS/IP/Netmask/gateway/etc.)
• Certificate or degree in Computer Science or similar discipline preferably with an emphasis in Technology
• Professional and effective communication in English

What we offer:

• Competitive salary
• The possibility to develop yourself and build your career
• Comprehensive Health Insurance
• A great working environment in a dynamic, international, fast-growing organization

Ready for the next step?

If you’d like to apply, please do so online. To learn more about us, follow us on LinkedIn or Instagram to get an inside look at the life at Leaseweb. For questions, please reach out to Danisha Ardilla - Talent Acquisition Specialist, at: [email protected]

Are you a Mechanical Engineer with expertise seeking to make a valuable contribution to the success of a product?

Super Tomato is a company that offers a comprehensive range of automation services, including design, fabrication, and assembly, for our corporate clients. Our expertise lies in automation and robotics.

We are currently looking for a motivated and competent Mechanical Engineer to design our upcoming product.

As a Mechanical Design Engineer at Super Tomato, you will play a crucial role in designing our next product. You will be responsible for every stage of the process, from ideation and prototyping to design validation, manufacturing, and reliability testing.

Your task will be to solve a given problem statement and conduct research to 3D print, test, and eventually bring it for fabrication and final assembly.

Your experience with mechanisms will be critical as it is required in significant part of our projects.

This product will have a significant impact on the public, as it will be deployed in high-traffic areas. You will be able to build a robust portfolio and showcase your skills.

If you are shortlisted, we will invite you to our office for a physical viewing of the product.

Responsibilities

• Hands-on assembly
• Designing products from scratch
• Sizing of components
• Communicating effectively with the vendor
• Conduct thorough testing of designs
• Cost-down

Qualifications

Having prior experience in designing mechanisms is highly desirable for this position. In addition, if you possess experience working with systems that are involved in food handling, that would be a great advantage.

NBCUNIVERSAL INTERNATIONAL

We create world-class content, which we distribute across our portfolio of film, television, and streaming, and bring to life through our theme parks and consumer experiences. We own and operate leading entertainment and news brands, including NBC, NBC News, MSNBC, CNBC, NBC Sports, Telemundo, NBC Local Stations, Bravo, USA Network, and Peacock, our premium ad-supported streaming service. We produce and distribute premier filmed entertainment and programming through Universal Filmed Entertainment Group and Universal Studio Group, and have world-renowned theme parks and attractions through Universal Destinations & Experiences. NBCUniversal is a subsidiary of Comcast Corporation.

Here you can be your authentic self. As a company uniquely positioned to educate, entertain and empower through our platforms, Comcast NBCUniversal stands for including everyone. Our Diversity, Equity and Inclusion initiatives, coupled with our Corporate Social Responsibility work, is informed by our employees, audiences, park guests and the communities in which we live. We strive to foster a diverse, equitable and inclusive culture where our employees feel supported, embraced and heard. Together, we’ll continue to create and deliver content that reflects the current and ever-changing face of the world.

CNBC INTERNATIONAL

CNBC is the world’s number one business and financial news network. Its mission is to help the influential and aspirational make astute decisions to get ahead by providing live market updates, breaking news, in-depth analysis and exclusive interviews.

CNBC’s vast portfolio includes CNBC.com, the online destination for global business; CNBC PRO, the network’s premium subscription service that provides real-time global market data and market analysis, as well as a growing slate of live and virtual events where consumers can experience CNBC’s award-winning journalism, live.

With headquarters in New Jersey, London, Singapore, and Abu Dhabi, CNBC provides a truly global 24-hour business briefing for senior business leaders, the financial community and those with assets to invest or protect. Today the channel is available in more than 392 million homes worldwide. CNBC also boasts a growing audience across its social media and digital video platforms.

Visit www.cnbc.com for more information.

NBCUniversal is the parent company of CNBC.

OVERVIEW

As a Broadcast Engineer, you will be responsible for ensuring the seamless operation and optimal performance of all broadcast equipment and systems. Your role will involve maintaining high technical standards to guarantee the continuous and uninterrupted transmission of our originated channels. You will play a pivotal role in ensuring that all systems are fully operational, facilitating smooth broadcasting and minimal downtime. You will be the backbone of our broadcast operations, ensuring everything runs efficiently across CNBC Asia Pacific’s platforms.

KEY RESPONSIBILITIES

• Oversee the maintenance, troubleshooting, and operation of broadcast equipment and contribute to new installation projects
• Lead assigned engineering projects, managing the planning, design, and implementation phases
• Maintain and update system and infrastructure diagrams to ensure they reflect any changes to the facility or infrastructure
• Ensure continuous, uninterrupted operation of CNBC Asia Pacific’s originated channels
• Maintain and ensure the full operational functionality of production systems to support scheduled production activities
• Ensure post-production systems remain fully operational to meet post-production schedule
• Address and resolve technical issues promptly to minimize disruption to broadcast operations
• Perform routine and critical maintenance on on-air transmission equipment, studio equipment, Uninterruptible Power Supply (UPS), air conditioning and computers, ensuring timely and efficient service
• Perform front line maintenance for Mechanical & Electrical (M&E) systems, including air conditioning and UPS systems
• Liaise with external suppliers, manufacturers and third-party service providers as required to source fixes for any identified gaps
• Provide proactive, engaged technical support to the Engineering team and ensure all systems remain up-to-date and functional.

ESSENTIAL REQUIREMENTS

• Relevant experience in maintaining broadcast or mission critical IT systems
• Familiarity with video transcoding technology, video formats and codecs and file-based systems/workflows
• Proven ability to solve complex technical issues and a passion for continuous learning and tackling new challenges
• Ability to plan, prioritize and manage multiple tasks simultaneously, while effectively resolving problems
• Strong team player with excellent communication skills
• Willingness to work shifts including early mornings, late evenings, weekends and public holidays
• Willingness to serve as the on-call duty engineer, covering after office hours, weekends and public holidays.

DESIRED ATTRIBUTES

• Minimum 5 years of experience working in a similar role
• Hands on experience and knowledge with equipment such as Grass Valley Stratus/Edius System, Morpheus Ice, VizRT, GV Router/Multiviewer/Orbit, Ross systems and MediaKind systems
• Ability to read/update technical AutoCad drawings
• Familiarity with video transcoding technology, video formats and codecs, and file-based workflows
• Knowledge of or experience with Uplink Compression system, Video Contribution/ Distribution systems
• Knowledge of or experience in a broadcast live production environment.

The responsibilities associated with this position are not limited to the above description and may be modified at any time by the Company.

ADDITIONAL INFORMATION

As part of our selection process, external candidates may be required to attend an in-person interview with an NBCUniversal employee at one of our locations prior to a hiring decision. NBCUniversal's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law.

If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access nbcunicareers.com as a result of your disability. You can request reasonable accommodations by emailing [email protected].

Duties & Responsibilities:

• To install, troubleshoot, repair service and maintenance for Chamber, Oven, Chiller & Semiconductor Testing Equipment.
• Provide technical support in the field.
• Prepare onsite for service schedules within budgets.
• Create and execute work plans and revise as appropriate to meet changing needs and requirements.
• Manage day-to-day operational aspects of the after sales service.
• Prepare progress reports, risk assessments and customer updates.
• Continually seek opportunities to increase customer satisfaction and deepen customer relationships.
• Manage sub-contractor and ensure work compliance with specifications.

Job Specifications:

• Diploma holder in Electronics/Electrical/Mechatronics Engineering or equivalent.
• Minimum experience of 1-2 years in the Refrigeration Industry.
• Knowledge and experience in brazing will be an added advantage.
• Willing to travel.
• Self-motivated and able to work independently, with minimum supervision.

Job Description:

• Develop and maintain iOS applications.
• Collaborate with designers and backend developers to implement features.
• Write clean, maintainable, and efficient code following iOS best practices.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Ensure applications are optimized for performance and reliability.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in iOS development.
• Proficiency in Swift and/or Objective-C for iOS development.
• Familiarity with iOS SDK, UIKit, and design patterns.
• Knowledge of RESTful APIs and third-party libraries.
• Strong problem-solving skills and attention to detail.

· Ability to resolve machining problems appearing on parts by analysing the regular test cuts usually provided with the Maintenance literature.

· Ability to resolve machine service , Maintenance tasks of the complex nature without Technical assistance.

· Ability to resolve application problems of a normal complexity by occasionally seeking the assistance from experienced Application Engineer.

· Ability to recommend solutions to customers.

· Provide training to customers when required.

· May supervise a less experienced service on a task related to the preventive maintenance, repair and/or installation of Machine.

· Ability to perform on site audit and provide support for customer sale.

· Customer orientated and self-driven.

· Strong and dynamic leader with active listening, understanding and problem solving skills.

· Analytical approach to complex problems, ability to prioritize, reliable, and independent

To assist Design for Safety Professional to carry out following duties:

• Recognise the importance of design for safety and health of a construction project to eliminate or mitigate such risks throughout the different life cycle of a building and structure
• Recognise, and advise stakeholders on, the duties and responsibilities of DfS Professionals in accordance with relevant legal requirements and WSH (DfS) Regulations
• Prepare for DfS review meetings in accordance with WSH (DfS) regulations
• Coordinate DfS review meetings for consideration of safety and health risks during different phases in the lifecycle of a building and structure
• Apply hazard identification tools and risk assessment for DfS review meetings in accordance with organisational procedures
• Establish types of safety and health records to be kept in the DfS Register in accordance with WSH(DfS) regulations
• Coordinate the flow of relevant information to stakeholders throughout the construction project
• Familiar with Design for Safety Guidelines of MOM
• Able to work with consultant team to carry out Design for Safety Review Meetings / Workshops in accordance to GUIDE 1, GUIDE 2 and GUIDE 3 according to MOM regulations
• Prepare and Maintain Design Risk Registers
• Prepare Design Risk Register documentation and handed over to relevant parties

JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical Installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical Installation, testing and commissioning

JOB REQUIREMENT

• Bachelor's degree in Electrical & Electronic engineering.
• Minimum 3 years work experience in process plants or in the water/wastewater industry, with good knowledge in electrical desgin of water and/or wastewater treatment plants.
• Familiarity with AutoCAD, Navisworks.