Asst Project Engineer

• To assist the Senior Project Engineer/Project Manager to conduct kick-off, pre-project/project meetings to ensure team members is clear on the objectives, deliverable, Quality, equipment’s Lead-time, Safety and construction requirements.
• Plan and assist the Senior Engineer to monitor the daily progress of activities to achieve on or before schedule, i.e., by comparing the planned vs actual progress status, identify critical activities.
• Preparation of engineering documents, such as inspection form, testing form and progress reports, updating of completion status.
• Together with the project team prepare the statement/work procedures, RA to specify the detailed work step required for the specific task of the job to be done and identify key risk with the associate risk. A risk mitigation strategy is applied with the whole project construction task.
• Calculate and tracking usage of resources, such as materials and tools with report prognosis to the Senior Project Engineer/Project Manager.
• Understand and evaluate the project requirements and project plans particularly, materials, schedule, equipment and labour loading.
• Assist the Senior Engineer/construction superintendent in assigning tasks to work teams.
• To explain the site situation, technical requirements, project specifications, special engineering requirements, coordination procedures, execution approach and activities priorities to the various work teams to seek contributions for further refinement.
• Ensure that various disciplines (including quality and safety personnel) are carrying out each tasks and tests/inspection in accordance with specification and standards as per the contractual requirements.
• Assist in resolving engineering issues at site, coordinating with the respective engineering support units, if necessary report discrepancy (if any) on labour status, equipment, materials etc. to the Senior Project Engineer/Project Manager.
• Preparation of project close-out report for the Senior Project Engineer/Project Manager to review before submission to clients.
• Ensure final acceptance of the project by client in accordance with contractual requirements

Job Responsibilities:

• Responsible for the architecture design and construction of the backend for social products and participating in technical planning.
• Responsible for the design of system software architecture, system modules, key components, and interfaces.
• Participate in writing core code, conduct project code reviews, continuously optimize code, and assist in resolving complex bugs.
• Adjust algorithm configurations in real-time based on business requirements.
• Participate in technical architecture reviews, ensuring high-quality technical designs.
• Guide, coordinate, and resolve technical issues that arise during the development process.

Job Requirements:

• Bachelor’s degree or above, majors in Computer Science, Software Engineering, or related fields.
• Minimum 5 years of experience in internet research and development, with experience in designing large-scale application systems. Experience in social product development is preferred.
• Proficient in microservices architecture and distributed architecture design, with experience in system development and optimization for high traffic, high availability, high fault tolerance, and high-load environments.
• Solid backend development skills, proficient in Java, with in-depth understanding and practical experience in data handling, performance optimization, concurrency, online system maintenance, and horizontal scaling.
• Familiar with Spring Cloud, Zookeeper, Redis, Kafka, Elasticsearch, and underlying architectures, including principles, cluster deployment, parameter optimization, and secondary development capabilities.
• Familiarity with recommendation technologies, algorithm engineering, and real-time estimation techniques is a plus.
• Strong communication, team collaboration, and project management skills, with the ability to work under pressure.
• A foundation in data analysis and a willingness to learn deeply, coupled with strong business acumen.
• Fluency in both English and Chinese for professional use.

Job Responsibilities:

• Responsible for the design, deployment, maintenance, and optimization of database systems, including installation, configuration, backup, and recovery.
• Monitor and optimize database performance to improve response speed and stability.
• Plan and expand database capacity to ensure scalability.
• Create and configure cloud servers, networks, storage, and other infrastructure on AWS to ensure a stable and reliable environment.
• Set up and manage monitoring tools to track AWS environment performance and operational status, proactively identifying and resolving potential issues to enhance system performance and reliability.
• Familiar with various AWS services and features, capable of selecting and configuring appropriate services based on business requirements.

Job Requirements:

• Bachelor's degree or higher in Computer Science, Software Engineering, or related fields.
• Minimum 3 years of database management experience, with familiarity with mainstream database systems such as Oracle, MySQL, and SQL Server.
• Proficient in database installation, configuration, maintenance, performance tuning, and troubleshooting.
• Solid knowledge of cloud computing and networking, with expertise in AWS services and architecture; previous experience managing AWS environments is required.
• Strong communication, team collaboration, and project management skills, with the ability to work under pressure.
• A foundation in data analysis and a willingness to learn deeply, coupled with strong business acumen.
• Fluency in both English and Chinese for professional use.

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Assist in the development and training of computer vision models using state-of-the-art machine learning techniques.
• Work with large datasets for model training.
• Collaborate with engineers to implement and fine-tune models, focusing on performance, accuracy, and scalability.
• Contribute to the deployment and monitoring of trained models in production environments, ensuring robustness and reliability.
• Participate in the development and maintenance of MLOps pipelines, automating the process of model training, deployment, and monitoring.
• Conduct research to explore and implement the latest computer vision and MLOps techniques and technologies.
• Maintain and update model pipelines, ensuring they meet project requirements and deadlines.

Qualifications

• Bachelor’s degree in Computer Science, Data Science, Artificial intelligence, Mathematic, Electrical Engineering, or a related field.
• Solid understanding of machine learning concepts, particularly neural networks and their applications in computer vision (e.g., convolutional neural networks, transfer learning, and deep learning architectures).
• Proficient in one or more popular machine learning frameworks such as TensorFlow, PyTorch, or similar.
• Experienced with computer vision libraries like OpenCV, scikit-image, or equivalent.
• Strong programming skills in Python, with expertise in using tools like NumPy, Pandas, and Matplotlib for data manipulation and visualization.
• Knowledge of data preprocessing techniques, including image augmentation, normalization, and resizing.
• Basic understanding of MLOps practices, including version control, continuous integration, and continuous deployment (CI/CD).
• Strong analytical and problem-solving skills with attention to detail.
• Good communication skills, both written and verbal, with the ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new tools and technologies in the rapidly evolving fields of machine learning, computer vision, and MLOps.
• (Optional) Experience with cloud platforms like AWS, GCP, or Azure is a plus.
• (Optional) Knowledge of Docker or other containerization tools for model deployment.
• (Optional) Familiarity with MLOps tools like MLflow, Kubeflow, or similar is a plus.

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Work Location: In person

WHO YOU’LL WORK WITH

Apparel and Accessories Costing Team is a function of Apparel and Accessories Supply Chain, driving costing model that is transparent, fair and fully digital across apparel and accessories. The team provides predictability, scalability and benchmarking of Nike manufacturing costs that improves end to end margin planning, cost mitigation and sourcing decisions. This role reports to Director, Apparel/Acc Costing, N Asia based in Shanghai

WHO WE ARE LOOKING FOR

The ideal candidate should have relevant experience and knowledge in Apparel/Accessories industrial engineering, costing, product construction, or production management. Good in product complexity analysis, workflow study and data management skills. Have good communication in technical manufacturing concepts with other stakeholders. A self-starter with ability to work independently and meet deadlines. Willing to learn and with “can-do” attitude. And below qualifications:

• Diploma or above. Minimum of 2-year work experience
• Certificate of General Sewing Data (GSD) and relevant knowledge in SAM (Standard Allowed Minute) /SMV (Standard Minute Value) analysis.
• Able to communicate in verbal and written English. Mandarin is a plus.
• Computer skills: Microsoft Excel, Word, PowerPoint, and Outlook.

WHAT YOU’LL WORK ON

As a Cost Engineer, this role will work closely with ACE managers and directors in optimizing the cost models in Nike, creating SAM/SMV database, managing the product cost analysis from manufacturing perspective, and driving cost improvement with best practice sharing. She/He will closely collaborate with both Nike internal and external stakeholders including factory partners to understand, collect and analyze the cost-related information, and then align the standard and processes.

Core Responsibilities include:

• Product Cost Engineering Analysis

1. Assist the Director/IE (Industrial Engineer) managers to design and enhance the product cost review tools (e.g. Product Standard Minutes - SAM/SMV database, Cost Matrices & Calculators) for quick and accurate product cost assessment.
2. Analyze the product cost based on style constructions, factory cost structure and other related cost factors e.g. Manufacturing efficiency during product development.
3. Liaise with Factory Partners (mostly their costing or IE teams) in case of critical gap (e.g. in SAM/SMV or other related production process) vs their quotation. Support the product development to resolve the costing challenges from product perspective.

• Update Nike cost model

1. Collect, review and analyze manufacturing information from factories or market research (machines, workflow, output/efficiency…) for setting the reasonable and sustainable cost models.
2. Track and report cost drivers (e.g. SAM/SMV, Efficiency/Productivity) Study the impact and drive the review with the key functions including factory partners, Manufacturing Engineering team and Product creation team.

• Improve factory cost performance

1. Collect and analyze production data. Report the factory performance through scoring Manufacturing Index or other measurements.
2. Study and share the best practice to improve the cost performance of factories. Regularly review and update any related cost benchmarks.

• Bachelor’s degree in civil engineering or related field, accredited by the Institution of Civil Engineers.
• A minimum of 5 years of industry knowledge may be strongly desired.
• Familiarity with design software, such as Autodesk, AutoCAD Civil 3D, and MicroStation.
• Knowledge of map creation software and photo imaging software.
• Strong analytical and critical thinking skills, with a high level of accuracy in calculations and design.
• Excellent time management skills to ensure project deadlines are met.
• Leadership skills to effectively manage a diverse group of professionals working on one project.
• Ability to coordinate more than one project at a time.
• RES or REO is the added advandage.

Summary:

• Basic up to $6000 (Senior), $5000 (Junior)
• Performance bonus
• Location: AMK / YCK / Central
• 5 days work week
• Familiar with ACMV
• Career advancement & stability

Key Responsibilities:

• Manage and lead the electrical team
• Perform engineering duties: design, engineering calculations, planning, tender and etc
• Perform testing and commissioning of ACMV electrical system
• QA/QC
• Resolve any technical issue during any stage of the project
• Liaise with clients, project manager, contractor and etc
• Ensure the team follows all electrical codes and standards
• Other relevant ad-hoc duties

Key Requirements:

• Min 5 years of relevant experience in Construction Electrical field, including testing and commission
• Familiar with ACMV

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Key Responsibilities:

• Partner with multidisciplinary teams to craft, build, and launch top-tier software applications, spanning mobile and web interfaces, as well as corresponding backend systems.
• Advocate for and implement industry-leading software development methodologies, including collaborative coding, peer review, and test-driven development.
• Spearhead technical forums, design system architectures, and coach team members to cultivate expertise and excellence.

Requirements:

• A minimum of 5 years of experience as a full-stack developer, with a demonstrated history of delivering high-performance, scalable solutions.
• In-depth knowledge of modern web development frameworks, including ReactJS, NextJS, TypeScript, and Kotlin/Java.
• Skilled in designing, implementing, and managing continuous integration and delivery pipelines, with expertise in deploying applications on cloud-based platforms such as AWS.
• Familiarity with database migration tools and techniques is a plus.
• Experience working in Agile/Scrum environments is also desirable.
• Excellent verbal and written communication skills, with the ability to clearly articulate complex technical concepts.
• A self-driven and proactive individual with a strong passion for innovation and continuous improvement.

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

http://www.dadaconsultants.com/

—------------

EA License number : 20S0283

EA Personnel : R1332294

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Key Responsibilities:

• Team Leadership: Manage and mentor a development team of 5 – 10 members.
• Project Management: Provide accurate estimates and oversee project deliverables .
• Frontend Development: Lead front-end development using Node.js, JQuery, Bootstrap, and related tools
• Technical Expertise: Utilize Java, Python, Groovy & Grails, Spring MVC, Hibernate, and other frameworks for full-stack development.
• Banking Experience: Develop secure and compliant banking-related applications.
• Quality Assurance: Conduct code reviews and maintain coding standards.
• Consulting: Propose technical solutions to client challenges and improve system efficiency.
• Product Demonstrations: Present project outcomes to clients and stakeholders.

Qualifications and Skills:

• Experience: 10+ years in software development projects, with a strong focus on banking solutions.
• Leadership: Proven ability to lead development teams of 5 - 10 members.
• Banking Expertise: Hands-on experience with banking systems, processes, and compliance.
• Technical Skills: Proficient in Java,Python, Groovy & Grails, Spring MVC, Hibernate, and frameworks like Node.js
• Frontend Development: Expertise in JQuery,Bootstrap, BackboneJS, and related tools.
• Database: Experience with Oracle,PostgreSQL
• Communication: Strong ability to manage client expectations and liaise effectively.

Job Description
• Involve in the project or maintenance services related with General Security Systems, Alarms
Systems, CCTV Systems , Access control systems and Server & Network infrastructure and whenever required.
• Perform Installation, Implementation, Configuration and testing of system/storage equipment & setup
• Troubleshoot problems encountered on site
• Perform OS hardening, patching and updating on servers/VM
• Develop implementation plan, migration plan and acceptance test plan for the project.
• Conduct acceptance test with users and address the testing findings/issues
• Work closely with Project/Maintenance Managers in planning the implementation tasks
• Maintain accurate and consistent set of work instructions service delivery processes.
• Develop As-built documentation for handover

Job Requirements
• Candidate must possess at least a Professional Certificate/Nitec, Diploma,
Advanced/Higher/Graduate Diploma, Engineering (Electrical/Electronic/Information
Technology ) or equivalent
• Minimum 2 years’ experience in Operational Technology/Information Technology industry
• Knowledge of networking and IP/TCP protocol
• In-depth knowledge in CCTV, Access Control and System Server etc.
• Hands-on experience in security-related tasks such as OS tightening, patching and updating,
virus scanning will be an added advantage.
• IT Certification in windows system & storage, network, database, virtualization, cloud
technologies will be an added advantage
• Good communication skills and positive working attitude.
• Candidate must possess a Class 3 driving license
• Fresh graduates welcome to apply

Job responsibility:

• Setup, commissioning and decommissioning of equipment
• Troubleshoot and resolve technical issues with semiconductor equipment
• Perform preventive maintenance on equipment
• Conduct training for customers’ engineers
• Provide technical support to maintain high level of customer satisfaction

Requirements:

• Diploma in Electrical / Electronics / Mechanical Engineering
• Excellent analytical skills with the ability to trouble-shoot and resolve technical issue
• Able to read electrical and mechanical diagrams
• Responsible, Positive Attitude and able to work independently with minimum supervision
• Prior experience working in semiconductor industry would be an added advantage
• Fresh Polytechnic Diploma holder are welcome to apply

SOFTWARE ENGINEER (AGV)

Company Background:

One of Asia Pacific's market leader in intelligent warehousing solutions.

Location: West (Benoi)

Working Hours: 5 Days Work Week (Mon-Fri - 8.30am to 5.30pm)

Benefits:

• Basic up to S$ 6000
• Performance Bonus (~3 months)
• Flexi Dollars S$ 800

Responsibilities:

Incumbent will be in charge of mainly 3 entities

• To develop and maintain Warehouse Control System (WCS) application.
• Development of REST API endpoints for interfacing with external and internal stakeholders
• Design and documentation of REST APIs
• Development of REST API interfaces and implementing REST API logic
• Database integrations for persisting REST API data
• Testing of REST APIs
• Development of internal APIs for interfacing with internal components
• Writing documentation for internal API interfaces
• Development of internal API interfaces and implementing internal API logic
• Testing of internal APIs
• Assist with software deployment and testing in customer site.
• Supporting deployment of WCS system on customer’s premises
• Handling integrations with additional systems
• Deployment and testing of the system
• Involve in DevOps related tasks

Job Requirements:

• Minimum Bachelor's Degree in computer science, computer engineering, information technology or a and relevant practical experience
• Software skills required: Python, Docker, Git, REST API

Please be notified that only shortlisted candidates will be notified.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

As an Manufacturing Central Team Assembly and Test Automation Project Engineer Automation Project Engineer, you are member of the Global Operations Team responsible for the worldwide portfolio of Automation projects aligned to Assembly and Test Operations objectives and corporate strategies and initiatives. You will develop, facilitate, and/or lead data-driven program management capabilities during Initiation, planning, and execution phases. You will identify risks early, manage issues, and drive initiatives to closure.

Job Responsibilities

• Collaborate with network teams - site automation, central/ site Process and Equipment Engineering, procurement, safety EHS in managing the automation projects
• Identify Project partners and manage expectations
• Identify and manage program projects dependencies
• Collect and document partner requirements
• Identify and resolve issues and conflicts
• Control project scope
• Communicate project expectations to team members and partners
• Coach, mentor, motivate, supervise, and provide recognition for projects
• Maintain project support through interaction with senior leaders
• Promote Program Management value and business practices to the organization
• Develop and deliver progress reports, proposals, requirements documentation, and presentations
• Identify potential crises, and develop and implement resolution plans
• Facilitate transition of system and business processes from project closure to long term sustainment
• Follows Company/Department Policies and Group expectations.
• Maintains a clean and safe working environment by proactively assessing the work (and surrounding) area and submitting work orders as needed.
• Recognizes and reacts to safety alarms (EES, fire alarm, MDA, etc.)
  Remains within Micron’s attendance policy.
• Displays a positive attitude toward Micron and its policies
  Holds self and other team members accountable for adherence to all company-wide safety procedures (PPE, EIPS).
• Observe all established EHS policies, requirements, and procedures.
• Understand and follow EHS guidelines included in work instructions.

Requirements:

- Bachelor's in Engineering or Science in fields such as mechanical, electrical, industrial, computer or automation.

- Minimum 3 years working experience in engineering semiconductor project management field

- Strong verbal and written communication skills

- Capability to lead teams and manage project team members

- Project Management Certifications are preferred

- Knowledge in automation, semiconductor process and systems are beneficial

- Experiences in supporting and leading global teams/projects

Job Description

• Support the production of scalable and optimised AI/machine learning (ML) models
• Focus on building algorithms for the extraction, transformation and loading of large volumes of realtime, unstructured data to deploy AI/ML solutions from theoretical data science models.
• Run experiments to test the performance of deployed models, and identifies and resolves bugs that arise in the process.
• Work on functional design, process design (including scenario design, flow mapping), prototyping, testing, training, and defining support procedures
• Work in a team setting and apply knowledge in statistics, scripting and programming languages required by the firm.
• Work with the relevant software platforms in which the models are deployed.
• Serve as liaison between stakeholders and project teams, delivering feedback and enabling team members to make necessary changes in product performance or presentation.
• Coordination: Collaborate with the Cloud Centre of Excellence and Infrastructure teams to address project needs.

Remuneration: Basic & VB + $800 Flexi Dollars + $60 Mobile Allowance + 3 month performance bonus

Work location: Pioneer

Working hours: Mon - Fri, 8:30am - 5:30pm

Job Description:

• Develop and maintain the Warehouse Control System (WCS) application.
• Create REST API endpoints for internal and external stakeholder integration.
• Design, document, and implement REST APIs, including logic and database integration.
• Test and deploy REST APIs effectively.
• Build and implement internal APIs for interfacing with system components.
• Write and maintain documentation for internal API interfaces.
• Assist with software deployment, testing, and system integration at customer sites.
• Support WCS system deployment and manage integrations with additional systems.
• Perform DevOps tasks related to deployment and testing.
• Contribute to areas like orchestration, fleet management, task execution, and optimization within the software development team.

Job Requirements:

• Bachelor's or Master's degree in Computer Science, Robotics, Electrical Engineering, or a related field.
• Experience with software development for robotic systems, including navigation, perception, and control algorithms.
• Proficiency in programming languages such as Python and C++ for embedded systems development.
• Proficiency with Linux operating systems.
• Hands-on experience with ROS (Robot Operating System) and RTOS (Real-Time Operating Systems).
• Experience in designing and implementing IoT solution architectures and integrations.
• Proficiency in front-end, back-end, or full-stack development for web applications.
• Experience with hardware-software integration, particularly in sensing and actuation.
• Familiarity with system-level testing and debugging.
• Strong understanding of software optimization for performance and reliability.
• Experience with DevOps practices and tools, such as Jenkins, Docker, and Kubernetes.
• Knowledge of continuous integration and deployment pipelines.
• Experience with verification and validation (V&V) processes.
• Strong technical writing skills for creating comprehensive documentation, including user and service manuals.
• Ability to interact effectively with field engineers and customer service representatives to provide technical support and troubleshooting

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Summary:

• Basic up to $4500
• Performance bonus
• 5 days work week, 8-5pm
• Location: Pioneer
• MNC company
• Career Advancement
• Proficiency in CNC machines

Key Responsibilities:

• To repair & service CNC machines in the region
• To implement service programmes for customer service
• Machine Installation
• Documentation (Service report, Machine registration, filing and record)
• Other related adhoc duties

Key Requirements:

• Min Diploma in Electrical / Mechanical / Mechatronics Engineering
• Min 2 years of relevant experience in servicing CNC turning / milling machines
• Possess class 3 driving license

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Basic salary up to $4500
• Commission available (comm tier will be shared later on)
• MNC company - stable revenue & perks
• Transport allowances
• Possess own vehicle
• Location: Pioneer
• 5 days work week
• Sales experience in precision engineering related products

Key Responsibilities:

• Develop new business opportunities & sales leads for revenue growth and customer retention
• Achieve sales targets and analyst current market trends and industry information
• Pitch, recommend and fulfil the requirement of customer in terms of products and services offered
• Work closely with the production, application and shipping team to ensure timely delivery and that all order requirements are met
• Attend problem and generate solution
• Other related ad hoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering or equivalent
• Sales experience in precision engineering related products
• Strong technical knowledge in CNC machines
• Possess own vehicle is a must

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job description:

As the RFFE Module design team leader, the candidate plays key design role in development and commercialization of MEMS Based RF-FE module for consumer electronics from new concept design, verification to mass production.

Candidates will designs develop, modifies, and evaluates electronic parts, components, or integrated circuitry for electronic equipment and other hardware systems on a multinational team basis.

Responsibilities:

- Co-working with international team including China and Singapore on a cross-disciplinary team basis

- Design and development of RF-FE modules to meet customer’s specification and needs

- Lead and produce 4G, 5G, WiFi module design, fulfil product lifecycle from engineering and transfer to production team

- Coordinate with engineering teams globally to produce module samples

Qualifications/Desired skills:

- Track record in commercialization of RF-FE modules.

- Broad understanding of RF analog component performance characterization via Smith Chart, tuning via passives, etc

- Extremely familiar with module application in RF application and have the ability to use advanced modelling techniques to design modules

- Strong skill in EM modelling and RF simulation tools Solid background in resonator/filter design, simulation, finite element analysis, layout, and package design

Advance Packaging Integration – Senior Engineer (Package Development Engineering, Silicon Technology Package Integration) (PDE STPI)

We are looking for a Package Silicon Integrator in Package Development Engineering (PDE) Senior Engineer who will lead and drive Micron’s Packaging Technology Development Projects meeting Time to Market (TTM) business unit needs as well as meeting performance targets for Thermal, Electrical, Mechanical, Reliability and Cost. You will collaborate with Micron’s multi-functional team that include Product Development, Wafer level process, Assembly, Test, Manufacturing and Global Quality. Together, we will be responsible for the designing Test Vehicle Development Strategy, and execution to definition, development, and delivery of state-of-the-art product/packages that will shape the future of advanced computing, automotive and mobile products.

Responsibilities will include, but are not limited to:

• Drive package technology integration activities for the silicon test chip development projects and support NPIs to keep roadmap items on track to meet “go to market” timelines.
• Coordinate core team in Development and NPI space of advanced 2.5D/3D packages and standard packaging to drive material and BOM choices, body sizes, manufacturability, and package constructions to achieve acceptable Design for Manufacturing (DFM) and Design for Reliability (DFR) requirements.
• Evaluate wafer design inclusive of bondpad, scribe, pillars/bump and polyimide, and drive materials and BOM choices such as die thickness and mold compound to meet chip package interaction requirements.
• Drive materials characterization from both package and die components to understand chip package interaction mechanism using TMA, DMA, nanoindentation, and packaging mechanical and thermal stress stimulus.
• Drive novel solutions with silicon design and product teams to recommend the optimum package solutions to meet electrical, mechanical (1st, 2nd, and 3rd level interconnect), thermal, reliability, cost, and other system level requirements.
• Interface closely with multi-functional team that include Product Development, Wafer Level Process, Assembly, Test, Manufacturing and Global Quality and manage the product/package to mass production.

Requirements:

• Bachelor/Masters of Science in physics, materials, mechanical, chemical, or electrical engineering. MS or PhD preferred
• 5+ years of relevant experience in semiconductor manufacturing or a related field, with hands-on experience in semiconductor packaging or Frontend processes, specifically in technology on
• Appreciation for Structured Problem Solving
• Ability to interpret die-, package-, and system-level design and simulation (thermal/mechanical/electrical) methodologies and results
• Knowledge in Chip Package Interaction (CPI)
• Experience and working knowledge with 2.5D/3D heterogeneous integration technologies such as WLFO, SoIC, CoWoS, WoW, InFO, and other chiplet/SiP architectures is a plus
• Experience with wafer bumping, package assembly, substrate technology, BOM selection, testing and product development lifecycle
• Excellent communication skills with the ability to convey complex technical concepts to both technical and non-technical partners
• Demonstrated leadership experience in guiding multi-functional teams and driving technical excellence

Keen on the role? Apply now!

Advance Packaging Integration – Senior Engineer (Package Development Engineering, Silicon Technology Package Integration) (PDE STPI)

We are looking for a Package Silicon Integrator in Package Development Engineering (PDE) Senior Engineer who will lead and drive Micron’s Packaging Technology Development Projects meeting Time to Market (TTM) business unit needs as well as meeting performance targets for Thermal, Electrical, Mechanical, Reliability and Cost. You will collaborate with Micron’s multi-functional team that include Product Development, Wafer level process, Assembly, Test, Manufacturing and Global Quality. Together, we will be responsible for the designing Test Vehicle Development Strategy, and execution to definition, development, and delivery of state-of-the-art product/packages that will shape the future of advanced computing, automotive and mobile products.

Responsibilities will include, but are not limited to:

• Drive package technology integration activities for the silicon test chip development projects and support NPIs to keep roadmap items on track to meet “go to market” timelines.
• Coordinate core team in Development and NPI space of advanced 2.5D/3D packages and standard packaging to drive material and BOM choices, body sizes, manufacturability, and package constructions to achieve acceptable Design for Manufacturing (DFM) and Design for Reliability (DFR) requirements.
• Evaluate wafer design inclusive of bondpad, scribe, pillars/bump and polyimide, and drive materials and BOM choices such as die thickness and mold compound to meet chip package interaction requirements.
• Drive materials characterization from both package and die components to understand chip package interaction mechanism using TMA, DMA, nanoindentation, and packaging mechanical and thermal stress stimulus.
• Drive novel solutions with silicon design and product teams to recommend the optimum package solutions to meet electrical, mechanical (1st, 2nd, and 3rd level interconnect), thermal, reliability, cost, and other system level requirements.
• Interface closely with multi-functional team that include Product Development, Wafer Level Process, Assembly, Test, Manufacturing and Global Quality and manage the product/package to mass production.

Requirements:

• Bachelor/Masters of Science in physics, materials, mechanical, chemical, or electrical engineering. MS or PhD preferred
• 5+ years of relevant experience in semiconductor manufacturing or a related field, with hands-on experience in semiconductor packaging or Frontend processes, specifically in technology on
• Appreciation for Structured Problem Solving
• Ability to interpret die-, package-, and system-level design and simulation (thermal/mechanical/electrical) methodologies and results
• Knowledge in Chip Package Interaction (CPI)
• Experience and working knowledge with 2.5D/3D heterogeneous integration technologies such as WLFO, SoIC, CoWoS, WoW, InFO, and other chiplet/SiP architectures is a plus
• Experience with wafer bumping, package assembly, substrate technology, BOM selection, testing and product development lifecycle
• Excellent communication skills with the ability to convey complex technical concepts to both technical and non-technical partners
• Demonstrated leadership experience in guiding multi-functional teams and driving technical excellence

Keen on the role? Apply now!

Summary:

• Mechanical engineer with BIM experience
• Basic up to $5000
• Variable bonus on a yearly basis
• Location: Central areas
• 5 days work week
• ACMV & LTA/SMRT experience

Key Responsibilities:

• Develop and design mechanical systems (HVAC, plumbing, fire protection) in 3D using BIM software (Revit, AutoCAD, etc.)
• Prepare detailed mechanical design models, drawings, and specifications for commercial, residential, and industrial projects
• Participate in design coordination meetings with architects, MEP engineers, and contractors to resolve clashes and ensure efficient project execution
• Utilize BIM coordination tools like Navisworks to detect clashes and implement clash resolution processes for mechanical systems
• Produce and maintain detailed documentation, including BIM execution plans, as-built drawings, and equipment schedules.
• Perform quality control checks on mechanical systems designs and ensure accurate implementation of BIM models in the construction phases
• Perform other duties assigned by Mechanical Manager

Key Requirements:

• Min 2 years of relevant experience
• BCA cert in BIM
• Must have ACMV & LTA/SMRT experience

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Remuneration: Basic Up to $7,000 + AWS

Job Description:

• Design, configure, deploy, and maintain Wintel and Linux server environments, including Windows Server (2019, 2022) and Linux distributions (RHEL, SUSE). Conduct server hardening
• Lead virtualization initiatives using industry-standard platforms such as VMware vSphere, Hyper-V, or KVM.
• Design and manage Storage Area Networks (SAN/NAS), ensuring data availability, integrity, and optimal performance.
• Ensure compliance with industry standards and regulations related to infrastructure and data storage.
• Implement and administer key management and encryption.
• Implement and administer Active Directory, including user accounts, group policies, security settings, and domain controllers.
• Implement and administer AD Public Key Infrastructure and Network
• Policy Server RADIUS services.
• Implement and administer monitoring solutions such as eG
• Innovations, PRTG, Splunk, or Kiwi Syslog server.
• Implement and administer backup solutions like Veeam or Acronis.
• Implement advanced system monitoring solutions to proactively identify and resolve performance and security issues.
• Investigate and resolve complex technical issues related to Windows Server systems, collaborating with teams and vendors.
• Coordinate with third-party vendors, IT providers, and external support for effective service delivery.

Job Requirements:

• Bachelor's degree in Computer Science, Information Systems, Information Technology, or a related field.
• Minimum of 5 years of experience in IT infrastructure engineering with a focus on Windows Server administration.
• Storage implementation experience with Dell EMC / NetApp
• Experience with Wintel servers (Dell), VMware, Microsoft server products, Symantec
• Proven experience in designing on-prem data centre architectures.
• Proficiency in configuring, managing, and troubleshooting Windows Server environments.
• In-depth knowledge of Active Directory, Group Policies, and security best practices.
• Familiarity with virtualization technologies such as VMware or Hyper-V.
• Experience with scripting and automation tools.
• Relevant certifications (e.g., MCSA, MCSE, VCP) are highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845