Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description :

We are looking for a skilled and proactive AV/IT Engineer who can take the lead on AV/IT initiatives and offer expert advice on AV/IT design and project plans, ensuring project needs are met, maintain, and monitor project timelines, intervening when necessary, onsite installation, upgrades, troubleshooting, take ownership and coordinate with others to support daily audio visual technical requests. Supervise and assist in the setup, troubleshooting and maintenance of audio visual systems. Perform preventative maintenance to ensure equipment is ready for use. Identify defective or failed equipment and resolve issues as they arise. Compile and analyze weekly reports, incident reports, and service report submissions, networking, and other in-house projects at customer premises. Programming, and basic construction setups Manage, test, and commission necessary devices. Ensure timely completion of testing, configuration, staging, and upgrades for assigned projects.

Requirements :

*Pass experience with working with Telcos is a must.

Core Responsibilities:

• Will normally work with a Site Engineer with the same areas of work.
• Execute, monitor and ensure the timely completion of the project
• Liaise with the Consultant Representative on project matters
• Coordinate with Site Engineer on the project matters.
• Coordinate with all Subcontractors on matters pertaining to site and quality issues;
• Ensure all contractual requirements are complied with agreed procedures.
• Keeping track on variation and claims of contract and cost impact and feedback information to the Site Engineer.
• Implement cost control measures to meet project budget.
• Co-ordinate with QAQC Engineer to ensure quality performance of project to meet customer requirements.
• Check working drawing, identify discrepancies for resolution.
• Check for quality of work according to specification and requirement;
• Maintain inspection records of works, materials and all completed works;
• To assist environmental aspects and impacts, and other environmental issues relating to EMS.
• Review project specifications, technical clarification and construction drawings.
• Coordinate with architect, structural engineer and M&E consultant and vendors to resolve construction and installation issues.

Site Based.

Report to Senior Engineer and Director.

Job Specifications

• Degree in Mechanial Engineering / Building Engineering or other building-related disciplines.
• 1-3 years' experience in building and construction projects.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

As part of IME’s Photonics & Sensors Department, the candidate will take lead of the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices at high RF frequencies, as well as the testing of electro-optical sub-modules and sub-systems. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices from frequency range of 0 to 110 GHz
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Manage photonics laboratory including facilities, health and safety, equipment calibration, inventory and stocktake
• Take the lead to procure laboratory equipment and consumables
• Prepare technical presentations and papers for internal meetings, as well as conferences and journals
• Collaborate with project team to ensure quality and on-time delivery for various projects
• Performs other duties as assigned.

Qualifications:

• Bachelor’s or master’s degree in Physics, Electronic/Electrical Engineering, Photonics, Opto-electronics or equivalent
• More than 5 years hands-on experience in active photonics/optoelectronic device testing, especially for high-speed optical modulator and photodetector devices and electronic-photonic integrated circuit.
• More than 5 years hands-on experiences in optical setup construction and semiconductor & optoelectronic device characterization
• Experienced on experimental data acquisition and analysis
• Skillsets in programming or instrument automation is a plus
• Strong skills in problem-solving, communication and providing technical presentations
• Industry experience and awareness is a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

As part of IME’s Photonics & Sensors Department, the candidate will take lead of the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices at high RF frequencies, as well as the testing of electro-optical sub-modules and sub-systems. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices from frequency range of 0 to 110 GHz
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Manage photonics laboratory including facilities, health and safety, equipment calibration, inventory and stocktake
• Take the lead to procure laboratory equipment and consumables
• Prepare technical presentations and papers for internal meetings, as well as conferences and journals
• Collaborate with project team to ensure quality and on-time delivery for various projects
• Performs other duties as assigned.

Qualifications:

• Bachelor’s or master’s degree in Physics, Electronic/Electrical Engineering, Photonics, Opto-electronics or equivalent
• More than 3 years hands-on experience in active photonics/optoelectronic device testing, especially for high-speed optical modulator and photodetector devices and electronic-photonic integrated circuit.
• More than 3 years hands-on experiences in optical setup construction and semiconductor & optoelectronic device characterization
• Experienced on experimental data acquisition and analysis
• Skillsets in programming or instrument automation is a plus
• Strong skills in problem-solving, communication and providing technical presentations
• Industry experience and awareness is a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Engage and manage various stakeholders (internal and external) expectations and communication.
• Collaborate with functional teams to conduct cleanroom/facility planning and layout
• Carry out physical area/ floor marking, coordinate with functional teams in tool purchase, movement (in/out), tool relocation plan, project timeline and capacity update.
• Perform risk analysis of various project options and outcomes
• Maintain and validate capacity/capital/space models to enable accurate assessment of wafer fabrication and operations loading needs
• Support operational efficiency improvement efforts (cycle time, OEE improvement, capacity optimization, space optimization)

Requirements:

• Degree in Engineering (Industrial & Systems Engineering), Mechanical, or relevant field;
• Proficient in AutoCAD 2D/3D and Simulation Tool preferred
• Proficient with Microsoft Words, Excel and PowerPoint proficiency
• Preferably to have industrial engineering experience in a semiconductor/ manufacturing environment
• Ability to work independently and team player to deliver in fast paced and collaborative environment

Responsibilities:

• Engage and manage various stakeholders (internal and external) expectations and communication.
• Collaborate with functional teams to conduct cleanroom/facility planning and layout
• Carry out physical area/ floor marking, coordinate with functional teams in tool purchase, movement (in/out), tool relocation plan, project timeline and capacity update.
• Perform risk analysis of various project options and outcomes
• Maintain and validate capacity/capital/space models to enable accurate assessment of wafer fabrication and operations loading needs
• Support operational efficiency improvement efforts (cycle time, OEE improvement, capacity optimization, space optimization)

Requirements:

• Degree in Engineering (Industrial & Systems Engineering), Mechanical, or relevant field;
• Proficient in AutoCAD 2D/3D and Simulation Tool preferred
• Proficient with Microsoft Words, Excel and PowerPoint proficiency
• Preferably to have industrial engineering experience in a semiconductor/ manufacturing environment
• Ability to work independently and team player to deliver in fast paced and collaborative environment

Summary:

• Basic up to 4.5k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company
• Career Advancement
• CNC machines

Key Responsibilities:

• To repair & service CNC machines in the region
• To implement service programmes for customer service
• Machine Installation
• Documentation (Service report, Machine registration, filing and record)
• Other related adhoc duties

Key Requirements:

• Min Diploma in Electrical / Mechanical Engineering
• Min 2 years of relevant experience in servicing CNC turning / milling machines
• Possess own vehicle

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Candidate will be required to develop, secure and manage industry partnerships for the NGTC. Candidate should stay updated on RF/mmWave GaN market trends and conduct thorough market research and competitive analysis on companies, competitors and the market for actionable insights. This may involve conducting SWOT analyses to enable NGTC to come up with a strategic plan to optimise business and research collaborations.

Candidate will also be responsible for developing and executing marketing strategies to promote NGTC’s capabilities to interested parties.

Candidate will be required to work alongside various internal and external stakeholders and teams to develop NGTC’s strong value propositions and assist with market intelligence to shape the NGTC’s strategies.

Candidate will be required to carry out account management of companies for NGTC to strengthen customer relationships.

Candidate will be required to coordinate and engage with internal stakeholders such as A*STAR’s Industry and Enterprise Group, Institute of Microelectronics or various other public sector agencies.

Requirements:

• Degree in Science or Engineering
• Minimum 5 years of relevant working experience, preferably with a background in GaN technology and industrial commercialization.
• Able to structure and negotiate collaboration agreements.
• Strong analytical skills.
• Strong communication (written and verbal), marketing and interpersonal skills.
• Results oriented, pro-active, and a team player.
• Adaptable and comfortable working in a fast-paced and fast-changing environment.
• Passion to develop Singapore’s semiconductor ecosystem.

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

Summary:

• Salary up to 6k+
• MNC company - stable revenue
• Transport allowances
• Own a vehicle
• Location: Pioneer
• 5 days work week
• Sales experience in precision engineering related products

Key Responsibilities:

• Develop new business opportunities & sales leads for revenue growth and customer retention
• Achieve sales targets and analyst current market trends and industry information
• Pitch, recommend and fulfil the requirement of customer in terms of products and services offered
• Work closely with the production, application and shipping team to ensure timely delivery and that all order requirements are met
• Attend problem and generate solution
• Other related ad hoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering or equivalent
• Sales experience in precision engineering related products
• Strong technical knowledge in CNC
• Own a car

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Candidate will be required to develop, secure and manage industry partnerships for the NGTC. Candidate should stay updated on RF/mmWave GaN market trends and conduct thorough market research and competitive analysis on companies, competitors and the market for actionable insights. This may involve conducting SWOT analyses to enable NGTC to come up with a strategic plan to optimise business and research collaborations.

Candidate will also be responsible for developing and executing marketing strategies to promote NGTC’s capabilities to interested parties.

Candidate will be required to work alongside various internal and external stakeholders and teams to develop NGTC’s strong value propositions and assist with market intelligence to shape the NGTC’s strategies.

Candidate will be required to carry out account management of companies for NGTC to strengthen customer relationships.

Candidate will be required to coordinate and engage with internal stakeholders such as A*STAR’s Industry and Enterprise Group, Institute of Microelectronics or various other public sector agencies.

Requirements:

• Degree in Science or Engineering
• Minimum 5 years of relevant working experience, preferably with a background in GaN technology and industrial commercialization.
• Able to structure and negotiate collaboration agreements.
• Strong analytical skills.
• Strong communication (written and verbal), marketing and interpersonal skills.
• Results oriented, pro-active, and a team player.
• Adaptable and comfortable working in a fast-paced and fast-changing environment.
• Passion to develop Singapore’s semiconductor ecosystem.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on a research project, funded by Singapore Ministry of Education (MOE), where you will be part of the research team to develop a scalable and comprehensive framework for formal verification of quantum programs. The framework consists of the following deliverables:
• Intermediate Language. We plan to develop an intermediate language to model quantum programs. The intermediate language would be complete to describe all the desired characteristics of quantum computing while at the same time simple enough to be understood by most programmers.
• Formal Verification Framework. We plan to develop a comprehensive framework to verify the correctness of quantum programs written in the proposed intermediate language.
• Mechanization. We plan to mechanize the formal framework using state-of-the-art theorem provers such as Coq or Isabelle/HOL.
• Proof Automation. We plan to develop formal methods for automatic reasoning that can be materialized into commercial tools.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI) and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  1. develop an intermediate language to write quantum programs.
  2. develop a comprehensive framework to verify the correctness of quantum programs written in our intermediate language.
  3. mechanize the verification framework using state-of-the-art theorem provers such as Coq or Isabelle/HOL.
  4. develop formal methods for automatic reasoning that can be materialized into commercial tools.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements:

• Have relevant competence in the areas of formal methods (including theorem proving and model checking, especially theorem proving), quantum computing, and software analysis/verification.
• Have a degree in computer science, computer engineering, or related areas. Possessing a Master’s or PhD degree will be advantageous
• Knowledge of separation logic and quantum program analysis/verification will be advantageous.

Key Competencies:

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Major Challenges:

As quantum computers are operated in extreme physical conditions and thus the cost per run is significantly high, it is desirable to verify the correctness of a quantum programs before the execution. However, the verification task of quantum programs is challenging due to the following reasons:

• Quantum programs (even written at high-level languages) are complicated to comprehend as it requires a good understanding of quantum mechanics and the relevant advanced mathematics.
• The quantum states are exponentially huge in size because the state of a classical bit is either 0 or 1 at any time, while the state of a quantum bit (qubit) can be in the superposition, where both states 0 and 1 can co-exist simultaneously. This induces the state explosion problem for brute-force-like methods.
• Quantum states are naturally probabilistic thus may yield different results on different runs, which is challenging for the testing and debugging methods.

Responsibilities:

• Manage optimum level of operations and maintenance of automation assets and ensure the Automated Storage & Retrieval System (ASRS) is running with zero downtime.
• Work closely with operation managers to manage customers’ expectations, contract deliverables, and project goals for their logistics solutions.
• Proactively identify, propose, and undertake process improvement projects in improving operations performance and drive cost savings initiatives.
• Responsible and accountable for customer's inventory stored in ASRS system by providing ensuring KPIs are met and generates reports as per request.
• Monitor and manages customer KPI, Inventory movements and activities to ensure just in time delivery.
• Work with vendors to diagnose problems and determine corrective solutions.
• Responsible and accountable for inventory control of critical spares parts, ensuring parts availability through early parts purchase.
• Partner with IT team and storage system vendor to troubleshoot system disruptions ensuring prompt recovery.
• Usage of appropriate subcontractors and ensure clearly defined performance requirements
• Provide specialist expertise on overall maintenance of ASRS, robotics and automation to support business operations

Requirements:

• Min Degree in Electrical & Electronic / Mechatronics / Mechanical/ Industrial Engineering.
• Experience in supporting Dematic Multi Shuttle and Swisslog Auto Store is a must.
• 3 to 5 years' relevant experience in maintenance of automation systems for logistics industries.
• 3 to 5 years' relevant experience in end-to-end project implementation for Robotics and Industrial Engineering.
• Excellent communication and stakeholder management skills.
• Ability to read & use Electrical Single Line and Mechanical Drawings is preferred.
• Knowledge in using AutoCAD and simulation software is preferred but not essential.
• Experience and strong knowledge in Material handling systems, Equipment and Programs with hands on in Programmable Logic Controller (PLC) and other systems is preferred.
• Experience in warehouse management system, warehouse control system ( SynQ and Dematic) and warehouse execution system.
• Experience in warehouse operations ( Inbound /Outbound / Inventory) is preferred.

At DHL Supply Chain we take pride in our commitment to fostering a workplace that celebrates diversity and promotes inclusion for all. We believe that the diverse backgrounds, perspectives, and experiences of our employees are integral to our success. Our inclusive culture is built on the principles of equality, respect, and belonging, where every team member is valued and empowered.
We actively encourage individuals from all walks of life, regardless of age, race, gender, sexual orientation, religion, nationality, disability, or any other characteristic, to apply for positions with us. We are dedicated to providing equal opportunities, removing barriers, and creating an environment where everyone feels they truly belong.

Summary:

• Basic up to $4500
• Variable bonus
• Location: Serangoon
• 5 days work week, 8-6pm

Key Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit
• Other related adhoc duties

Key Requirements:

• Min Diploma in Electronics Engineering
• Min 2 years of relevant work experience in electronics manufacturing indusrty

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Remuneration: Basic with AWS & VB

+ $120 Transport Allowance + $66 (Flexible Benefit Allowance) + eMedical Card (cover spouse + children under 18)

Work location: MacPherson

Working hours: Monday to Friday

Job Description:

• Responsible for planning and implementing the execution of preventive and corrective programs within schedule in compliance to regulatory standards and requirements.
• Perform troubleshooting/ faut diagnosis/ failure analysis to determine cause of failure for equipment.
• Development of Standard Operating procedures (SOP) and Work Instructions (WI) to technicians to develop their competence.
• Develop and perform Risk Assessments to evaluate mitigation measures for all maintenance activities.
• Establish and maintain proper document system to achieve all jobs internally for sharing and audit purposes.
• Assist in identification, planning and reviewing of necessary training needs for mentoring and coaching of maintenance staffs.
• Preparation and write maintenance and spares consumption report.
• Perform other duties as instructed by Management.

Job Requirements:

• Degree in Maintenance Engineering or related discipline
• 2–3 years of relevant work experience
• Ability to relate work with different stakeholders
• Proficiency in Excel, Words and Powerpoint
• Able to think and work independently and as a team member in a challenging environment

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

On behalf of the hiring company that is in the Built Environment OEM space, we are looking for suitable personnel to join them as Software Development Executives (electrical background):

Responsibilities :

• Software Design: Develop software for various vertical transportation systems, including Housing & Development Board (HDB), private, and modernisation systems. Refer to approved layout drawings, production requests, machine applications, client specifications, and electrical straight diagram drawings.
• Electrical Diagram Review: Interpret and verify electrical straight diagram drawings from the Hardware Design Department. Identify and report any inconsistencies or errors.
• Documentation and Communication: Issue notices, instructions, software documents, and contract-related materials as needed.
• Factory Support: Assist factory testing staff with job software design and technical troubleshooting during system testing.
• Design Optimisation: Ensure that software designs are cost-effective and fully comply with client specifications and project timelines.
• Error Investigation: Participate in investigating software errors and develop corrective and preventive measures. Collaborate with the Electrical Department to address any discrepancies between software and hardware designs and resolve issues before shipping the system to the site.
• Field Support: Assist system installation staff during on-site installations. Troubleshoot problems, and modify software as necessary to meet client requirements.

Requirements

• A diploma (at least 3 years) or degree in Electrical Engineering
• Familiar with programming languages such as C, C++, etc
• Familiar with schematic or single-line designs/drawings
• Able to work independently and as a team

Remuneration will be pegged to qualification and experience

Location: East (near to MRT station)

EA Licence : 22C0971 | EA Registration : R21101298

• Work closely with internal and external stakeholders to manage the technical risk, security operation and SOC.
• Act as IT security expert for department in the areas of cyber security assessments, PAM, Database, WAF, Firewall and EPP/EDR.
• Perform risk assessment and identify mitigation controls for the risk area identified.
• Enhance and build cyber threat detection user cases and assist in analyzing and reducing false positive.
• Identify infection/compromise in the company utilizing threat intelligence and indicators of compromise (IOCs) from different threat Intel sources and regulators.
• Ensure all compliance and security control functions are performed timely and orderly.
• Drive continuous improvement of procedures and processes related to cybersecurity process and operations monitoring.
• Track, monitor and valid security-related and risk issues, provide an action plan to rectify the issues and prevent recurrence.
• Generate security reports and metrics as required.
• Provide timely and periodic update to managements on its security matters.
• Stay current on the latest Cyber threats, Attacks and vulnerabilities etc.
• Good diploma or degree in Computer Science, Digital Forensic or Engineering preferred.
• Preferred minimum of 6 years of relevant work experience in IT security auditing or security operation role.
• Strong knowledge in internet infrastructure, networking technology and security (i.e. DNS, DHCP, Firewall, WAF, IDS, IPS, VPN, APT and TCP/IP protocols)
• Working experience with major SIEM will be advantage
• Strong practical experience in Cyber security: Cyber kill chain, TTP, threat intelligence, malware triages.
• Demonstrated ability to multitask and is detail-oriented with inquisitive mind during case investigation.
• Good team player with strong communication skills with project teams, stakeholders, senior management, and contractors including both technical and non-technical personnel.
• Professional security related qualification (e.g. CEH, ECIH/GCIH, and ITIL) will be favorable although not mandatory technical skills

Responsibilities

• Administer, upgrade, maintain high availability, performance, and security of Linux, Windows, storage clusters, virtualization clusters (VMWare and Kubernetes), and critical middleware services.
• Oversee, monitor, improve infrastructure and critical services health through performance optimization, security hardening, patch management, service updates, and scalability assessments.
• Drive the adoption of automated practices such as Infrastructure as Code (IaC) for provisioning, configuration, and maintaining infrastructure.
• Develop, maintain, improve automation scripts and tools to streamline continuous integration (CI) pipelines and deployment processes for software development and IT operations.
• Design and implement monitoring solutions or observability tools to track infrastructure performance, logs, and application health.

Requirements

Educational Background:

• Diploma, Degree or higher in Computer Engineering, Computer Science, Engineering, Information Technology, or a related technical field. Advanced certifications are a plus.

Professional Experience:

• Minimum 6 years of hands-on, professional experience in IT operations, infrastructure management, software development, or a closely related field.

Technical Skills:

• Proven experience in managing and supporting critical services across Linux, Windows, and middleware platforms.
• Strong background in Linux administration and management.
• Strong expertise in Windows Server administration, including AD, GP, Windows-based infrastructure services.
• Extensive experience in virtualization platforms (ESXi) and container orchestration (Docker).
• Hands-on experience in network and software-defined storage technologies (Ceph, NAS, NFS).
• Proficiency in CI/CD processes, automation tools (GitLab CI, Jenkins), deployment workflows.
• Knowledge in infrastructure monitoring, alerting, logging tools (ELK Stack, Grafana, Loki, Prometheus).
• Experience in Infrastructure as Code (IaC) tools (Ansible, Chef, Puppet).
• Strong willingness to learn, collaborate, and contribute to continuous improvement.

Preferred Skills

• Proficiency in scripting and automation with Bash, Python, Shell, PowerShell, Go, YAML.
• Strong knowledge of security protocols and best practices in infrastructure management and DevOps.
• Familiarity with hardware storage technologies (DAS, FC, iSCSI, RAID, SAS, RAID).
• Experience with common IT integrations (LDAP, SIEM, SMTP, REST).
• Knowledge in CI/CD methodologies and tools.

What We Offer

• Competitive salary, bonuses, attractive benefits package.
• A flat hierarchy with minimal bureaucracy, where all technical leads are also hands-on.
• Freedom to pursue your interests within reason.
• Learning opportunities through courses, seminars and conferences.
• A stable working environment with flexible hours.
• A chance to make a meaningful impact on society through your work.

Job Description

• Working on 6nm and below advanced process project APR and Timing/PI sign-off
• Take the TOP and PM role for the complicated hierarchical chip (more than 20M inst plus 500+ macros)
• Take the Block or Block coordinator role for complex blocks
• Do early prediction for critical APR/Timing/PI issues

Job Requirements

• APR/Timing/PI hands-on/tapeout experience on complicated hierarchical chip
• With min. 8 years relevant experience
• TCL/Perl/Python/C/C++ programming skill
• Have advanced process(n6 or below) experience is a plus
• Excellent communication and team work spirit

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.