Job description:

· Commissioning, Maintenance, Repair & Troubleshooting of marine electrical & mechanical equipment onboard vessels and in company premisses/workshop ( i.e. Burners, Boilers, Scrubbers, EGE, EBG, GCU and supporting systems).

· Ability and willingness to travel on short notice onboard vessels in region, but occasionally also globally.

· Employees must have ready valid travel documentation, passports, visas, seaman book and vaccinations as required to travel.

· This is full time position, and we welcome experienced candidates of all ages.

· Ensure that the work is executed according to the company’s Quality, Health, Safety and Environment guidelines and customer site procedures and report unsafe practices and incidents.

· Write Service Certificates (time sheets) on site and get them signed by customer.

· Write Service Reports with full details of job done, warn customer on possible safety issues, spare parts required/suggested and giving suggestions & recommendation of future services.

· Proactive recommendation of required/suggested spare parts to Customers.

· Communicate sales opportunities to Service Managers.

· Provide onsite and remote technical support to clients.

Required skills:

· Preferred experience with Boiler & Burners systems, Scrubbers, but it is not mandatory.

· Troubleshooting skills in electrical, electronic & mechanical systems.

· Basic programming skills of PLC (Programmable Logic Controllers).

· Basic parametrisation knowledge of industrial & marine controllers.

· Experience in automation, control and instrumentation devices, pumps, electrical motors, frequency converters, actuators, positioners, …

· Proficient skills in MS Office.

· Fluent written and spoken English.

· Cross cultural awareness.

· Structural and systematic approach when executing tasks.

· Attitude to provide high quality of work results.

· Good communication skills.

· Team player mindset with attitude to share knowledge and experience with Your colleagues.

· Customer oriented approach with effectively prioritizing and executing tasks with clear customer communication with no prestige attitude.

Setup and maintenance of desktops, laptops, phones, printers, peripherals and mobile devices – Windows and Apple Platforms

• Escalate and work with second or third level support/third party vendor on resolution of problem when necessary

Experience in the WOG environment.

• Maintain hardware inventory at assigned locations

• Provision new users with hardware, software and account setup

• Provide with both remote and onsite support for multiple locations, if required

• Troubleshoot and resolve a variety of technical problems

• Assist with network connectivity issues

• Provide great communication and customer service to company employees in person and through phone calls and emails

• Work on assigned tasks and projects including hardware and software rollouts

• Work with hardware / software vendors, whenever required

• Provide training when needed help facilitate users requests and in the implementation of company project

• Provide VPN support including end-user setup and problem

• Work closely with other support teams (client support team, application support team, server support team)

• Develop and document IT operational processes whenever required

Job Role/Level System Engineer (onprem + GCC)

Mandatory Skills Windows

Preferred Skills Windows OS Support & Troubleshooting, Windows Active Directory knowledge

Brief Job Description

Scope of work requested for the services is to provide system support (level 1/2) to manage Government agency servers. It includes the following:

1. Incident Management

a. Monitoring new incidents

b. Working on incidents assigned

c. Troubleshoot and resolve system issues

d. Timely follow-up and closure of incidents

e. Updating and resolving incidents status in ITSM system

2. Service Request Fulfilment

a. Monitoring of new service request (SR)

b. Work on SR assigned

c. Setup and configure new systems

d. Hardening of OS and applications

e. Timely follow-up and closure of SR

f. Updating SR status in ITSM System and closure of SR

g. Updating Asset Management team on asset issued / returned

3. Monthly Patching

a. Patching of systems

b. Testing upon completion of patching

4. 24 x 7 standby support

a. 24 x 7 standby support and to go onsite as and when required

5. Daily health check / Escort vendor

a. Daily health check and submission of daily health check report

b. Escort vendor when request are raised

6. Other tasks

a. Conduct any other tasks as required of a system engineer role

6 PERSONNEL REQUIREMENTS

6.1 The Contractor’s support personnel managing the servers must be trained and minimally be proficient in the following areas:

Windows Server

(a) The System Engineer shall minimally possess the following requirement:

(i) At least three (3) years of experience in Microsoft Server administration;

and

(ii) Microsoft Certified Solutions Associate (MCSA);

Joining Arup

Arup’s purpose, shared values and collaborative approach has set us apart for over 75 years, guiding how we shape a better world.
As a world leader in its field, Arup offers the full spectrum of civil engineering consulting services. As part of the Civil Water and Resources team, this role covers a broad range of skills relating to civil infrastructure. In particular, the focus of the Civil Engineer is to undertake design and consulting services within the Civil Engineering discipline in order to enhance the team’s portfolio of skills and expertise. You will also get the opportunity to work on a variety of Energy, Water, Land Development, Rail and Industrial projects.

The Opportunity
Are you passionate about delivering impactful, innovative, and sustainable infrastructure solutions?

Deliver technical inputs in areas such as earthworks, drainage, HV and EHV cable and substation works, WSUD and ABC Waters design, water transmission and distribution systems, utility diversion works, civil structures and geotechnical works.

In this role, you will:

• Provide design expertise across the project lifecycle, from Master Plan and Feasibility Stages through Concept, Preliminary, and Detailed Design, and offer support during construction phases.
• Contribute to small- and medium-sized projects, while serving as a key team member for larger projects. Your responsibilities will include design, technical documentation, cost estimation, tender preparation, project scheduling, and meeting deadlines and budgets.
• Be responsible for meeting project deadlines, monitoring budgets, managing resources, and controlling expenditure to achieve financial targets.
• Support the growth of Arup’s Energy, Water, and Resources Infrastructure capability in Singapore.
• Collaborate within an extraordinary collective that values individuality, diversity, and innovation, while doing meaningful work that positively impacts clients and communities.

Is this role right for you?
We’re looking for someone with:

• A minimum of 3 years (post-tertiary education) of relevant experience in Civil Engineering, with a focus on designing roads, utilities, and paving elements in a consulting business environment.
• At least 1 year of experience delivering land development projects from pre-concept design to the site phase for clients such as Local
• Government Authorities and/or Private Developers.
• Preferably, 1 year of on-site experience during construction phases.
• Proficiency in highway, paving, and reinstatement design; utility, drainage, and sewer works design; authority submissions; and tender and construction drawing preparation.
• The ability to deliver high-quality design, technical documentation, and cost estimates while meeting deadlines and budgets.

What we offer you
At Arup, we care about each member’s success, so we can grow together. Guided by our values, we provide an attractive total reward package that recognises the contribution of each of our members to our shared success. As well as competitive, fair, and equitable pay, we offer a career in which all of our members can belong, grow and thrive – through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do. We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup’s legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling eligible members to share in the results of our collective efforts.

• Please see a list of Arup’s Singapore benefits below:
• Hybrid working policy & flexible working hours
• 13th month bonus
• Birthday leave
• Paid parental leave for birth mothers 16 weeks & new parents (excluding birth mothers) 4 weeks
• Purchase Additional leave of up to 20 days (permanent employees)
• Paid Annual subscription to relevant Professional association.
• Reimbursement of Professional Engineers application and examination Fees
• International mobility opportunities
• QP allowance
• Site Allowance
• Work related travel insurance
• Dental expense cover
• Marriage leave (3 days)
• Examination leave (2 days)
• Family care leave
• Bike Loans of up to SGD2000

Different people, shared values

Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We are an open environment that embraces diverse experiences, perspectives, and ideas – this drives our excellence.
Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Arup provide an environment where you will make a positive difference. Discover more about life at Arup at www.arup.com/careers/your-life-at-arup. We are committed to making our recruitment process and workplaces accessible to all candidates. Please let us know if you need any assistance or reasonable adjustments throughout your application or interview process, and/or to perform the essential functions of the role. We will do everything we can to support you.

Our Application Process
Please apply directly through our applicant tracking system. Shortlisted candidates will be contacted by Talent Acquisition to discuss next steps. Stay safe online – Arup will never ask for your bank details as part of our recruitment process.
Arup does not accept unsolicited resumes from recruiters or employment agencies.

Job Responsibilities:

• Responsible for the design and development of core Java architecture, solving complex technical problems, ensuring code quality, system performance and security.
• Participate in the planning and optimization of system architecture, and provide suggestions for technical solutions and architecture design.
• Master and apply the latest technology trends to continuously improve the performance and maintainability of the system.
• Lead and guide technical team members to conduct code review, technical guidance and team technical ability improvement.
• Coordinate team resources, assign tasks, and ensure project progress and quality.
• Create an open and collaborative technical atmosphere to help team members overcome technical difficulties and improve their technical level.
• Participate in project demand analysis, solution design, implementation and tracking to ensure on-time delivery of projects.
• Coordinate cross-departmental communication such as product managers and operation and maintenance teams to ensure the smooth launch and continuous iteration of the system.

Job requirement:

• Bachelor’s degree in Computer Science, Engineering, or a related field (master’s degree is a plus).
• At least 8 years of related experience in software development, with at least 8 years in a leadership role.
• Expert in microservice architecture design
• Strong coding skills in SQL/Python/Java/...
• Good communication skills, with excellent technical and business combination ability
• Strong sense of responsibility, good stress resistance, able to maintain clear thinking under high-pressure environment.

• Lead and manage cellular system validation for field test activity in various markets across Singapore.
• 10+ years of experience in the industry with program management, working with cross-functional teams
• 3 years of experience in mobile phone testing of 5G/4G technologies
• Hands on experience with Modems, Cellular, SoC, Network Infrastructure, connectivity and Telephony
• Experience in 5G/4G log analysis and debug issues from field tests
• Experienc with Carrier Certification: PTCRB/GCF or similar
• Development knowledge in Android or IOS or other wireless devices
• Analyze the 5G/4G logs from field test in Singapore and identify keys issues, and work with test and software teams to resolve it.
• Summarize the 5G R15/R16 carrier features, analyze data, and manage bug reporting to drive and secure the Phone modem quality, from modem and telephony perspective.
• Exercise technical acumen to keep goals for programs, projects, and products attainable within a given timeline, while communicating with stakeholders clearly.
• Identify opportunities for field automation and manage development of field automation tools and processes.
• Expertise of cellular radio technologies and features: 3G/4G/5G VoLTE, MIMO, Antenna Design, OSI Stack, 3GPP, IEEE, Etc.
• Experience in using drive test tools ShannonDM, QXDM, QCAT, Android Debug Bridge, Accuver, Nemo, TEMS, Genex Probe, Android Platform
• System-level expertise of Android or Smart Phone OS and its architecture
  Experience in 5G R15/R16 carrier requirements, driving cellular field testing projects across multiple product areas and distributed sites, with engaged resources and priorities
• Experience with 5G (FR2/FR1)/4G Modem/Telephony
• Knowledge of 5G/4G to drive field functional/performance and Carrier test

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Responsibilities

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

Job Description

• Comply with the local construction code and approved Quality document
• Assist project teams to identify quality requirements and develop Project Quality Plans for projects
• Conduct inspection reports for all subcontractors work to ensure alignment with the quality standards
• Assist Project Teams with control vendor performance/non-conformance issues and implement actions to correct non-compliance
• Prepare and submit Request for Inspection (RFI) to consultant prior to official QA/QC inspection and testing activity
• Carry out the execution of the project as per plan
• Register all incoming materials and items for the project
• Responsible for managing day to day lifting operations
• Plan, organize, supervise and liaise closely with sub-contractors and operation teams on all ongoing lifting activities
• Conduct routine checks and inspections of works on site to ensure compliance with authorities' and client’s requirements
• Review project safety (e.g. lifting plans, etc.)
• Other ad hoc duties as assigned

Job Requirements

• Degree in Civil Engineering or equivalent
• At least 2 years of working experience in the related field is required
• Ability to work with tight deadlines
• Work closely with project team to resolve technical issues
• Good attitude and communication skills
• Willing to multi-task
• Need to be stationed at site
• Location: East

Requirements:

• Bachelor's or Master's degree in Computer Science, Engineering, or a related field.

• Proven experience as a Big Data Engineer or similar role.

• Strong proficiency in Apache Spark and Scala programming.

• Experience with big data technologies such as Hadoop, Hive, Kafka, etc.

• Familiarity with data warehousing concepts and tools.

• Knowledge of SQL and NoSQL databases.

• Excellent problem-solving skills and attention to detail.

• Strong communication and collaboration skills.

Preferred Qualifications:

• Experience with cloud platforms like AWS, Azure, or Google Cloud.

• Knowledge of machine learning frameworks and libraries.

• Experience with containerization and orchestration tools like Docker and Kubernetes.

EA Number: 11C4879

This is a contract position with a large consultancy company that is involved in a rail project.

Job Description:

• Designing signalling layouts and systems, including track circuits, interlocking systems, and automatic train control (ATC).
• Specifying hardware and software for signalling equipment like signals, switches, and train detection systems.
• Ensuring systems comply with safety standards (e.g., CENELEC, IEC).
• Overseeing the installation of signalling equipment on-site.
• Conducting testing and validation to ensure proper functionality.
• Certifying systems for operation in collaboration with safety assessors and regulatory bodies.
• Developing preventive maintenance schedules for signalling equipment.
• Diagnosing and resolving faults in signalling systems to minimize operational disruptions.
• Upgrading aging systems to meet modern standards or integrate with new technologies.
• Designing fail-safe systems to ensure trains stop safely in case of a failure.
• Conducting risk assessments to identify and mitigate potential hazards.
• Ensuring adherence to national and international railway signalling standards.
• Integrating signalling systems with other technologies like traffic management systems (TMS) or autonomous train operations.
• Implementing modern systems such as the European Train Control System (ETCS) or Communications-Based Train Control (CBTC).
• Collaborating with civil engineers, rolling stock engineers, and other stakeholders.
• Managing timelines, budgets, and procurement for signalling projects.
• Exploring new technologies like digital or satellite-based signalling systems.
• Adapting systems to support high-speed rail, urban transit, or freight applications.

Skills Required:

• 15-20 years experience
• Technical Expertise: Strong knowledge of signalling principles, circuits, interlocking, and control systems.
• Problem-Solving Skills: Ability to analyze and resolve system faults effectively.
• Regulatory Knowledge: Familiarity with railway safety standards and certifications.
• Communication Skills: Coordinating with multidisciplinary teams and stakeholders.
• Software Knowledge: Proficiency in CAD tools, signalling design software, and programming where applicable.

Alternatively, you can apply directly to [email protected]. Only shortlisted candidates will be contacted.

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Join the Team at McConnell Dowell Are you passionate about engineering and civil infrastructure? At McConnell Dowell, we deliver landmark projects that shape communities and drive progress.

We're seeking Project Engineers and Site Engineers to join our team in Singapore and contribute to our civil infrastructure works projects.

About the Role

As a Project Engineer or Site Engineer, you'll play a pivotal role in ensuring the successful execution of our projects. Your responsibilities will include:

• Overseeing engineering, planning, quality, cost control, and scheduling functions.
• Adhering to the McConnell Dowell Project Execution Plan and safety/environmental responsibilities.
• Assisting senior engineers and the construction manager in daily site activities.
• Monitoring and reporting on site progress, including direct employee and subcontractor works.
• Developing procedures for construction activities and ensuring compliance with relevant legislation.
• Representing McConnell Dowell professionally in interactions with clients and stakeholders.
• Promoting McConnell Dowell’s core values and fostering a strong safety culture.

What We’re Looking For

To excel in this role, you should have:

• A degree in Civil or Structural Engineering. 3 to 5 years of relevant on-site civil construction experience.
• Preferably, local experience and knowledge of civil infrastructure projects in Singapore.
• Strong interpersonal and communication skills.
• The ability to work on an alternate 6-day workweek schedule.

Why Join McConnell Dowell? Be part of a dynamic team working on major civil infrastructure projects. Gain valuable experience with a globally recognized infrastructure company. Contribute to innovative and impactful engineering solutions.

How to Apply If you're ready to take your engineering career to the next level, we want to hear from you! Submit your application today and join McConnell Dowell in building a better future.

We require an experienced Engineer for our ACMV division.

Job Scope

1)Project Planning and Project execution including documentation and budgeting for Service,Repair and Installation Costing

2) Installation/ Service and Repair on the following brand and systems

1. GUNTNER
2. SABROE
3. MUNTERS
4. EVAPCO

3) Material procurement for project

4) Liaise with clients on projects

5) Complete vendor evaluation

6) Supervise at site for installation and safety compliance

6) Testing and commission for ACMV systems

Job Requirements

1) Degree in Engineering or Equivalent

2) At least 8 years of work experience in projects wit focus on ACMV

3) Speaks English well to communicate to clients

4) Proficient in Microsoft Word, Excel

5) Experience in Projects for ACMV

Candidates are expected to:-

• Take lead of the shipboard engineering department and engineers in the maintenance, operations, and repairs of the vessel’s mechanical and electrical systems, equipment, and installations;
• Ensure seaworthiness and readiness of the vessel’s mechanical and electrical systems, equipment and installations in accordance to voyage schedule;
• Plan and maintain inventory of spare parts, fuel, and lubricating oil;
• Take charge of emergency drills and situations related to the vessel’s mechanical and electrical systems, equipment, and installations;
• Develop and control plans for the maintenance of technical installations and equipment throughout the vessel;
• Deploy vessel staff in close consultation with the Chief Mate and Second Engineer;
• Appraise the performance and potential of the vessel's staff in accordance with established company procedures
• Ensure the vessel has sufficient freshwater supply for the voyage;
• Oversee bunkering procedure and liaise with relevant stakeholders for the delivery of bunker vessel;
• Ensure compliance to all local, national and international environmental laws relating to maritime safety, pollution, and domains where applicable; and
• Perform survey work in accordance with Classification Society regulations.

The ideal candidate must:-

• Possess a valid Certificate of Competency (Marine Engineer Officer) Class 1; and
• Possess at least 3 years of experience as a Chief Engineer onboard a container vessel.

Job Highlights

• Good Salary Package, Performance Bonus, Allowance
• 5 Day Work Week
• SAFE Working Environment

Job Description

Responsibilities

• Break new grounds and penetrate the key industries as in; Food Packaging, Medical, Petrochemical, Chemical, Pharmaceutical, Semiconductor etc.
• Undertake the role to develop new and key accounts and strive towards achieving sales goals and objectives.
• Propose improved materials or products to customers and explain the benefits of the changes.
• Engage the customers on a day-to-day basis to initiate and coordinate sales activities.
• Preparation of sales proposal, quotations and attending customer’s enquiries
• Responsible for Sales target for Singapore region.
• Track and report sales activities; submit reports promptly.
• Be competent to undertake hands-on related issues arising from aftersales including onsite trouble-shooting.
• Create sales leads, follow up on sales opportunities and take ownership to follow up on quotations.
• Contract review prior to order entry – Evaluate and interpret customers’ specification against our offer. Clarify with customer where necessary to resolve unclear requirements. Be responsible to coordinate with Order Administration team on shipment update and information going back to the customer up to the point of delivery.
• Working closely with customers to find application possibilities and propose suitable technical solutions.
• Conduct competitive analysis and identify market price for various suppliers and market segments in Singapore.
• Conduct product and application training if necessary.
• All other ad-hoc duties as assigned by the company.

Requirements:.

• Degree/Diploma in business, marketing, engineering or any relevant field.
• 1 to 2 years of sales engineering experience.
• Excellent communication, sales, and customer service skills.
• Salary depends on experience.
• Prefer with vehicle ownership.
• Self-motivated and ability to work in a team or independently with minimum supervision.
• Meticulous, organized and great interpersonal skills.
• Cheerful and pleasant personality.
• Excellent written and verbal communication skills.
• Able to converse and write in English and Mandarin.
• Mandarin language will be an advantage to communicate with Mandarin-speaking clients and suppliers occasionally.
• Computer literate, knowledge of Microsoft Office software. Outlook, Word, Excel and PowerPoint is a must.
• 2 years contract subject to convert full time staff.

Job Type

2 Years Contract

Key Responsibilities:

· Manage and direct the day-to-day operations of IT services

· Manage outsourced vendors and in-housed contractors to meet the delivery and operation needs of IT services

· Manage change request, service request and production support issues and ensure service levels are met

· Review system designs and technical specifications to ensure all requirements are captured to meet system objectives

· Review post production issues and identify root cause and work with vendors on preventive measures

· Plan, execute and support system implementation, software/hardware upgrades and security patches

· Manage the verification of software patches and upgrades for applications

· Measure, monitor and continuously improve performances of IT service

The Talent:

· Bachelor or higher Degree in IT or equivalent

· At least 5-8 years of relevant experience in application production support on Java and .NET applications in both Unix and Windows operating environments

· Experience in incident management, problem management, release management, root cause analysis and deployment

· Understand SDLC and experience working with business users, various IT teams and vendors

· Knowledge of web languages (e.g. HTML/CSS, JavaScript)

· Experience with .NET Core

· Familiarity with databases (e.g. Oracle, Microsoft SQL) and application servers (e.g. IIS,WebSphere Application Server)

· Prior experience working as a Systems Analyst for a Government organization will be a big plus

· Sound understanding of the technical aspects of systems integration in an environment with diverse technology

· Strong communication skills and ability to influence to gain consensus from multiple stakeholders when required

· Possess strong information acquisition, analytical and problem solving skills

· Good organization skills and able to work with minimal supervision in a rapidly changing

environment

We regret that only shortlisted candidates will be notified.

Please kindly send in your updated CV (please include your current salary package with full breakdown and expected salary) to [email protected]. Your interest will be treated in strict confidence.

People Profilers Pte Ltd

DID: 6950 9738

http://www.peopleprofilers.com

Lim Yi Tian, Candy

EA License No. 02C4944
Registration No. R1109829

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

A global manufacturing firm is looking for a System Eningeer to join their team. Manage enterprise-level Windows servers for on-prem and Azure cloud and security vulnerabilities.

Your new role:

• Configure, deploy and manage on-premise Windows servers including Active Directory, DNS, group policies etc
• Monitor and optimize system performance and availability, troubleshooting and resolving issues across the Windows ecosystem.
• Implement, manage, and monitor cloud-based solutions in Azure, including M365, Azure AD, Virtual Machines, and ensure seamless integration between on-premises Windows systems and Azure resources.
• Apply knowledge of Windows security protocols to secure communications across applications and systems.
• Assess and mitigate risks associated with any security vulnerabilities, certificate management, and encryption practices.

You will need:

• Prior experience in a similar role managing Windows system and server infrastrcuture on a global scale, idealing working with IaaS and PaaS operations
• Sound technical knowledge on Windows infrastructure (e.g. Windows Server 2016/2019/2022) and Azure cloud services and best practices for hybrid environments
• Experience writing scripts for automation in powershell is preferred as is familiarity with Windows security frameworks (e.g., zero trust, CIS and more)
• Professional certifications such as Microsoft Certified: Azure Fundamentals or Solutions Architect Expert is a strong advantage

If you are interested in this role or know someone who might be suitable, please click 'Apply' to submit an updated copy of your CV or email [email protected].

EA registration No.: R1987315

Employment Agency License No.: 18C9146

• Knowledge on Internet Technologies (i.e. routing, switching and general network infrastructure),
• Experience in network operations/maintenance and passionate about providing troubleshooting support
• Strong analytical and problem-solving skills, and has a flair for dealing with technical and operational problems
• Experience in IT audit or CISA/CISM certified preferred or operational risk management and control self-assessment or prior experience in implementing security solution and information security governance
• Enterprise Data Network (administration, patching, upgrade and migration activities), Design, Preparing of HLD/LLD, Implementation Team leading, Service Level management, demand, incident, change management.
• Cisco/Aruba Switching /Routing & WLAN
• DDI, AAA/Cisco ISE
• As Built, LLD, Testing & Acceptance Testing Documentation Skills
• ZScaler & Network Security
• Provide network WAN/LAN design, implementation, consulting, Cisco, Aruba, Juniper
• Network audit Identify the gaps and suggest the remedial solution. Supporting in RFP/RFI response.
• Experience in running operations with ITIL processes / Project Management - PMP

• Running daily testing and diagnostics on IT systems to identify potential problems
• Strong understanding of High Availability setup for Linux/Windows applications (etc. webs, database)
• Strong network fundamentals – IPv4/IPv6 – addressing, NAT, Routing
• Network and Systems troubleshooting and maintenance
• Good to have disaster recovery planning and execution
• Building robust backups that can be accessed in the event of system failures
• Private cloud administration experience is a must – VMWare / Hypervisor
• In-depth experience in DNS, DHCP, Proxies, Linux firewalls & network security is a must.
• Maintain and Administer Security Appliances of different projects
• Liaising with senior operational staff to ensure that company systems can help fulfil wider business goals
• Design and propose a plan that will improve the hosting service of the Data Center

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a DevSecOps Engineer to join us!

Role and Responsibilities:

• Design, implement, and manage CI/CD pipelines using GitLab to support continuous integration, delivery, and deployment.
• Develop and maintain automated scripts and tools to enhance DevSecOps processes including SCA (Software Composition Analysis) and container scanning.
• Manage and optimize AWS services including ECS, ECR, Aurora, WAF, Network Firewall, Transit Gateway, ALB, and NLB to ensure secure and efficient cloud infrastructure.
• Implement security best practices in cloud environments, focusing on identity management, logging, monitoring, and incident response.
• Collaborate with development and operations teams to promote a security-first mindset and embed security practices throughout the software development lifecycle.
• Conduct regular security assessments, vulnerability scans, and penetration tests to identify and remediate security weaknesses.
• Monitor and respond to security incidents and anomalies in real-time, providing analysis and recommendations for corrective actions.
• Stay up-to-date with the latest security trends, vulnerabilities, and technologies to ensure robust defenses against potential threats.
• Good to Have: Knowledge in MS Entra, MS Graph API, Node.js, MongoDB, and AWS Lambda (Python Serverless).

Qualifications:

• Education: Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Experience:
  • 2+ years of proven experience in DevSecOps and/or Cloud Services management and deployment, with a strong focus on AWS and/or Azure services.
  • Hands-on experience with GitLab CI/CD pipelines.
  • Experience with security tools and practices including SCA, container scanning, and penetration testing.
  • Good to Have: Experience with GCC-2.0.

Skills:

• Proficiency in managing AWS services (ECS, ECR, Aurora, WAF, Network Firewall, Transit Gateway, ALB, NLB).
• Strong scripting skills (Python, Bash, etc.) for automation.
• Familiarity with containerization technologies (Docker, Kubernetes).
• Excellent understanding of security principles and best practices.
• Strong problem-solving skills and attention to detail.
• Excellent communication and teamwork skills.

Preferred Qualifications:

• Certifications:
  • Required: Associate-level AWS certifications (e.g., AWS Certified SysOps Administrator, AWS Certified Developer).
  • Good to have: Azure certifications (e.g., SC-300, AZ-104).
• Additional Experience:
  • Experience with Infrastructure as Code (IaC) tools such as Terraform or CloudFormation.
  • Background in software development with knowledge of secure coding practices.
• Soft Skills:
  • Ability to thrive in a fast-paced, agile environment.

Proven track record of proactive problem-solving and innovation.

Requirements:

• Comfortable with a 5-year direct contract (with perm benefits)
• At least 5 years of experience in the above domain areas

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS's privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Benefits

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

Section A: Objectives/Purpose of the Job

The successful candidate will support the execution of planned changes at our Singapore sites, focusing on hardware replacements, troubleshooting, and installations. This role is vital for ensuring smooth operations and minimizing downtime during change implementations.

Section B: Key Responsibilities & Key Result Areas

• Network Equipment Familiarity: Understand and work with network devices and their components, including fibre and copper cables.
• Support Planned Activities: Participate in early morning green zone activities (between 11pm and 6am) two to three times weekly within Singapore, as required.
• On-site Hardware Support: Execute hardware changes, including the physical replacement and installation of network devices, plugin of USB media, organize the fibre/copper cables in preparation for planned activities and other equipment as per change requests.
• Troubleshooting: Diagnose and resolve issues encountered during change implementation with existing hardware and consoles, ensuring minimal disruption to operations.
• Console Setup: Provide console connection as needed during planned activities.
• Communications: Liaise and coordinate with implementation engineers, internal stake holders , providers and partners to ensure swift and efficient resolution of faults
• Continuous Improvement: Identify areas of improvements to reduce Infrastructure faults and improve monitoring capability.

Working Hours:

• Regular Hours: 8:30am-6pm SGT in Singapore Office, if no on-site activity
• Early morning green zone activities: twice or thrice weekly, between 11pm to 6am

Additional Information:

• Travel: travel within Singapore required
• Physical Demands: Ability to lift and move equipment as necessary, and perform tasks in various physical environments.

Section C: Qualifications & Experience

Must have

Good to have

Qualifications

A good Diploma in Electrical / Electronic / Computer Engineering / Computer Science / Information Systems from a recognized institution

Candidates with 2 years of relevant experience and knowledge in network devices and transport can be considered if there is no diploma.

Experience

1 – 2 years of hands-on experience on network devices

Technical / Professional Skills

• Knowledge of routers/switches architecture and analytical trouble-shooting skills in the area of technical fault isolation and rectification.
• Working experience and strong understanding of Juniper devices and its parts will be an added advantage

Non-Technical / Soft Skills

• Possess good interpersonal and communication skills.
• Possess basic knowledge of office applications skills e.g. Excel, Visio, Word.
• Self-starter and highly driven with the ability to work independently, as well as in a team.

Key Responsibilities:

• Refine data collection/consumption by migrating data collection to more efficient channels.
• Plan, design and implement data engineering jobs and reporting solutions to meet the analytical needs.
• Develop test plan and scripts for system testing, support user acceptance testing.
• Work with the Authority’s technical teams to ensure smooth deployment and adoption of new solution.
• Ensure the smooth operations and service level of IT solutions.
• Support production issues - Track record in implementing systems with high availability, high performance, high security.

The Talent:

• Good understanding and completion of projects using waterfall/Agile methodology.
• Good understanding of analytics and data warehouse implementations.
• Strong experience in Cloudera implementations and administration
• Strong knowledge on CDP, CDH and HDP
• Ability to troubleshoot complex issues ranging from system resource to application stack traces.
• Strong SQL, data modelling and data analysis skills are a must.
• Hands-on experience in big data engineering jobs using Python, PySpark, Linux, and ETL tools like Informatica.
• Track record in implementing systems using Hive, Impala and Cloudera Data Platform will be preferred.
• Hands-on experience in DevOps deployment and data virtualization tools like Denodo will be preferred.
• Understanding/ Hands on experience of reporting or visualization tool like SAP BO and Tableau will be beneficial but not required.
• Passion for automation, standardization, and best practices
• Good written and verbal communication and interpersonal skills, ability to understand the business requirement, communicate confidently with stakeholders.

We regret that only shortlisted candidates will be notified.

Please kindly send in your updated CV (please include your current salary package with full breakdown and expected salary) to [email protected]. Your interest will be treated in strict confidence.

People Profilers Pte Ltd

DID: 6950 9738

http://www.peopleprofilers.com

Lim Yi Tian, Candy

EA License No. 02C4944
Registration No. R1109829

view more jobs: www.blueboxjobs.com

The detail plans as described above are as follows:

• Execution formation with the direction by COMPANY’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with COMPANY’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the COMPANY’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Candidates are expected to:-

• Participate in the general planning of maintenance and operations onboard vessel;
• Control the detailed implementation of the general plans in appropriate areas;
• Plan the activities of immediate subordinates and officers under his/her charge;
• Serve as a member of the Management Team onboard vessel;
• Implement safety policies and practices onboard vessels according to the QHSSE policies as defined;
• Perform the role of the Training Officer for any Engineer Cadets/Ratings;
• Deputise for the Chief Engineer when necessary; and
• Appraise the performance of immediate subordinates and Cadets and report to Chief Engineer.

The ideal candidate must:-

• Possess a Certificate of Competency (Marine Engineer Officer Class II); and
• Possess at least 3 years of experience as a Second Engineer Officer onboard a container vessel.