Job Description & Requirements

• Supports technical solutions
• Recognizes problems that are beyond capabilities and is learning from the experts in the area
• Supports new capital equipment purchases and implementation
• Supports cell layouts and process improvement initiatives
• General understanding of Six Sigma and lean tools to improve processes
• General understanding of Design for Manufacturability and Assembly (DFMA) concepts and supports new product introduction
• Represents the company with our customers
• Supports updates to management on operations status
• Learns the steps involved to incorporate process improvements
• Supports the manufacturing floor for any process related questions
• Creates and maintains process documentation and updates work order documentation
• Supports implementation of basic engineering changes
• Adheres to applicable Quality System requirements
• Supports Process Flow Charts, PFMEA, and Control Plans
• Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.

Job Responsibilities

1. Provide front and backend supports for the following security systems:

a. Access Control System – Integrated Security Management System (ISMS);

b. Electronic Key and Cabinet System: Key Management System (KMS);

c. Radio Communications: Digital Trunk Radio System (DTRS);

d. CCTV System – Video Surveillance Management System (VSMS);

e. Entry / Exit Access Turnstiles;

f. Crash Barriers; and

g. Vehicle Alert System

2. Perform corrective and preventive maintenance on all security systems.

3. Ensure critical system fault reported rectified within the shortest possible time to prevent disruption to operation.

4. Update and maintain fault rectification report.

5. Maintain security system stock inventory to ensure sufficient spare.

Job Requirements

• Meet the relevant Regulatory Authority's statutory requirement of minimum 21 years of age.
• Diploma/Higher NITEC/NITEC from a recognized training institute.
• Must be able to work rotating shifts, including weekends and public holidays
• Technical knowledge or experience in electrical/electronic work. IT Network knowledge would be an added advantage.
• Experience in CCTV or card access system.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description :

• Responsible for all the handshake tests, writeup creation, demo arrangement, sample graphic submission, ICONICS license handling, server arrangement.
• Responsible for Writeup and GUI preparation, Backend development monitoring, server arrangement.
• Designing network architecture, VLAN, network switches and firewall selection, server selection, procurement on network devices, IP assignment, rack assignment, rack power calculation and UPS selection, port assignment
• Monitoring project progress, attending to technical discussions, providing technical support, arranging Software requirement (EMS and MMS), implementing Smart solution
• Getting quotations, PR arranging, PI arranging with BM team, product delivering, attending technical discussions, project progress monitoring, resolving issues
• Selection of licenses, getting quotation from HQ, approving PR, optimizing license requirements, distributing license keys, holding all the license details for past and current projects
• Contacting ICONICS support team, raising tickets to clarify issues, updating status of the issues, arranging monthly meeting with ICONICS, meeting minutes creating and sharing, distributing details of critical fixes, testing new requirements
• Referring technical specs, providing server and license requirement, attending to tender meetings
• Creating and amending technical guidelines for ICONICS, G5, third party integration, graphic creation, project management, D&A, network designing, license selection, server selection, training manual

Requirement :

• Candidate must possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Knowledge of C++/ Phyton/ PLC is needed
• Knowledge in HVAC systems, SCADA software, Building Management systems would be an added advantage

We regret that only shortlisted candidate(s) will be contacted.

As a Sales Engineer / Senior Sales Engineer, you will join our dynamic sales force in developing new businesses and providing professional solutions to our potential clients. Identify new sales opportunities through prospecting.

Job Description:

• Originate and close opportunities to develop new market segments, product groups and channels.
• Identify and canvass new sales opportunities and market through prospecting.
• Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Work closely with General Manager to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Travelling to be expected.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 5 years in marine industry.
• Positive working attitude and self-motivated.
• Preferred who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components MRO.

Additional Information:

• 5 days’ work week
• Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.
• Variable bonus and better medical benefits.
• Career growth & learning opportunity.

Job Description

Overall Job Summary

The incumbent is responsible to provide support in the day-to-day overall HR and office administration functions, including handling of administering pay and employee benefits, recruitment and selection, training and development, updating of HR policies and procedures, employee relations and administrative matters.

Responsibilities and Duties

• Advertise, search and schedule candidates for interview
• Process clients’ monthly payroll and CPF
• Manage end-to-end process of on boarding and off boarding of employees
• Handle EP, work pass application, renewal, and cancellation
• Support daily administration/operations matters
• Other admin duties assigned by the Manager

Job Requirements

• Minimum 2 years of relevant HR experience with a diploma / degree in Human Resources Management or equivalent.
• Possess effective verbal and written communication skills.
• Resourceful, initiative, self-motivated, diplomatic and people-oriented.
• Good team player and yet able to work independently with minimal supervision.
• Ability to multi-task with good time management skills.
• Proficient in Microsoft Word, Excel, Power-point and IT savvy.
• Experience with Opensoft and Success Factors HRIS software will be an added advantage.
• Able to commence employment within short notice.

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

Diploma/Bachelor Degree in Civil, Mechanical, Electrical and Electronic Engineering,science

Minimum 10-15years

Knowledge in AutoCad, MS office & MS project

Knowledge in material procurement

Knowledge in quantity take off

Able to handle the contractual matter

Able to handle the sub-contractors and vendors

Knowledge in safety standards

Good communication skils and writting skills

Experience in process industry like pharmaceutical, oil and petrochemical

Coordination with BMS Supplier, Electrical and HVAC Sub Contractors

Managing safety requirement on site

The System Engineer is responsible to monitor and resolve all issues related to company IT & related systems (hosted on premise and on cloud).

Act as a single point of contact for all reported IT & related system issues and queries related. Take full responsibilities to escalate and work with IT/Systems vendors to resolve reported issues within SLA.

The System Engineer will assist the IT Infrastructure Manager to maintain, support and optimized key functional areas such as network, server, data & telecommunications system, video conferencing equipment and security.

Essential duties and responsibilities include the following:

IT Support and Management

· Ensure the smooth running of all IT & related systems (on premise and on cloud)

· Take the lead on all IT & related system incidents and problem management

· Assist IT Infrastructure Manager on infrastructure investment and support budgets (including system license, maintenance and related IT support costs)

· Working closely with IT application team to ensure compliance to information security audit requirements and provide IT technical assistance wherever necessary

· Ensure proper IT infrastructure policies, standards, procedures and risk controls are followed during issues resolution

Delivery management

· Project manage implementation and deployment of infrastructure/systems in accordance with corporate agreed priorities and deadlines

· Drive good project management practices and governance within the IT and vendor teams

Outsourcing and vendor management

· Assist IT Infrastructure Manager to monitor all outsource infrastructure/system vendors performance against agreed SOW and SLA

Requirements

· Diploma in Computer Engineering or related

· At least 2-3 years of working experience with systems (on premise and cloud technologies)

· Experience in one or more of the following domains: Microsoft Windows & Servers technologies, Cisco networking, WAN technologies (SD-WAN), Security, Virtualization, Storage, Backup/Disaster Recovery, Private/Public/Hybrid Cloud based technologies

· Hands-on experience in supporting PC/notebook hardware, network printer, MS Windows and standard software (MS office, Antivirus, internet browser) and Outlook client, desktop setup, wireless, Active directory, VPN setup/troubleshooting

· Exposure to Engineering industry environment (preferred)

· Good communicator with strong problem solving and analysis skills

· Ability to work in a team environment to engage and motivate team members

· Positive attitude and able to work well with culturally and geographically diverse teams.

Responsibilities and duties

· Define processes, system specifications, input-output and working parameters for hardware and/or software compatibility.

· Work on device qualifications / applications and generate suitable processes to meet or exceed customer requirements

· Work closely in cross-functional teams to develop process solutions

· Support customers in technical training during new product or process introductions, equipment process buyoff and post-sales process troubleshooting

· Assist in preparation of engineering plans and programs

· Field visit or travelling maybe required

Requirements

· Bachelor’s or Master’s degree in Engineering or Science related field

· 2-5 years of process experience on high precision electro- mechanical components and system

· Working experience in semi-conductor industry preferred

· Strong analytical and problem solving skills

· Good communication and interpersonal skills

· Good presentation skills and report writing skills

· Strong attention to detail and organization

· Self-motivated and able to work independently

** Senior grade would be offered to the candidate with strong background or relevant working experiences

Job Descriptions:

* Site coordination, Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Involve in Project planning, electrical & control, instrumentation / sensor, programming, Testing and Commissioning, Service and Maintennace, Documentation and Training

* Experience in AutoCAD drawing or equivalent will be added advantages

* Ad-hoc engineering support when required.

* Willing to work on fast pace environment.

* Willingness for standby duties or work after office hour or during weekend / Public Holiday

Job Requirements:

* Relevant graduate diploma for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance.

* Fresh graduates are welcome.

* Hands on experience in automation system implementation and support.

* Experience in programming, site coordination and support

* Electrical, instrumentations and control knowledge

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

- Managing a part of the construction

project

- Assist in technical advice and supervision

for other members of the staff

- Planning day to day work program of the

project progress

- Ensure projects meets agreed

specifications, budgets as well as

timescales

- Authorizing technical drawings and

engineering plans

- Ad-hoc assignments

Job Requirements

- Diploma in civil engineering or equivalent

- Minimum 1 year experience in landed

property from start to finish

- Good communications skills

Job description

Non-Destructive Testing (NDT) technicians examine structures,vehicles, and products for aws and structural weaknesses usingnon-destructive testing techniques. They conduct material tests,interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering,or a similar eld. Relevant NDT certication. 10+ years' experience as an NDT technician. Advanced knowledge of NDT technologies including ultrasound,infrared, and radiographic.

Performs site engineer responsibilities for

managing all aspects of the construction,

installation, maintenance, and repair of

electrical power lines, electrical systems,

fixtures, apparatus, and appliances.

This individual is responsible for planning,

scheduling, assigning, participating in, and

inspecting the works of power linesmen,

electricians, and trades helpers. The employee

also has responsibility for supervising the

operation of an electrical repair shop. Work

includes the design and construction of

special electrical apparatus and fixtures and

the preparation of specifications and

estimates for construction, repair, and

installation projects. Large scale and complex

jobs are normally inspected upon completion

for conformance with specifications; smaller

jobs are checked for satisfactory operation by

the users of the equipment. Work is

performed under general direction of an

administrative superior and is reviewed

through discussions and inspection of

completed work.

DUTIES AND RESPONSIBILITIES

Plans, assigns, schedules, and supervises the

work of power linesmen, electricians, and

helpers engaged in the construction,

installation, maintenance, and repair of university power lines, electrical systems, fixtures, apparatus, and appliances;

participates in the more difficult work.

Trains and instructs subordinates on detailed

procedures. Conducts periodic inspections and gives onsite

supervision over hazardous or unusual

work assignment is; assures availability of

equipment, materials, and supplies.

Estimates the time and material costs

required for projected jobs; keeps cost and

job records and submits reports; initiates

requisitions for supplies, tools, and

equipment. Troubleshooting of all Electrical &

ELVS PLC Knowledge preferred

Perform & Supervises the installation of all

Electrical & ELVS

Enforces safety regulations, rules, and working

conditions.

Recruits and trains personnel in the safe

operation of equipment and tools.

EDUCATION AND EXPERIENCE:-

Degree or Higher ; 4 years of related

experience including site engineer or lead

experience and considerable experience as a

Lead Site Engineer or any equivalent

combination of training and experience.

Excellent communication skills.

KNOWLEDGE, SKILLS AND ABILITIES:-

Thorough knowledge of the practices,

methods, equipment, materials, and tools of

the electrical trade.

Thorough knowledge of the occupational

hazards and safety precautions of the work.

Ability to supervise the work k of skilled

workers.

Considerable knowledge of the National

Electrical Code for electrical installations.

Ability to interpret and work from instructions,

pencilled plans and sketches, and blue prints.

Ability to communicate and coordinate with

superiors, subordinates, vendors and Ability to estimate materials and labour costs.

Skill in the use and care of all hand and shop

tools and equipment of the electrician's trade.

Retrofit Engineer

Do you enjoy being part of team that provides high-quality services for our customers?

Would you like to be in a team delivering world class service to our customers?

Be part of a successful Customer Service team

Baker Hughes Valves is a global technology company that designs, develops and manufactures the highest quality, most accurate and reliable control valves and safety valves products, services and solutions to our customers across a large range of process industries.

Partner with the best

As a Retrofit Engineer, you will be in charge of BoM and technical support for Pressure Safety Valves (Consolidated) and Control Valves (Masoneilan). You will also provide a global engineering support focused on Channel Partners and Aftermarket Centers for the selection, repair, maintenance, and replacement of Masoneilan and Consolidated products.

As a Retrofit Engineer, you will be responsible for:

• Executing design and analysis of assigned projects to develop valves meeting customer application needs, specification requirements, complying with local design/product standards.
• Reviewing customer specifications and “translating” customer specification in to order instructions for manufacturing of valves.
• Providing Retrofit solutions, with bills of material, drawing information, test specifications and processing instructions to meet quality and manufacturing requirements.
• Creating the design review process, ensuring accuracy, quality and design for manufacturability goals are met.
• Enabling the use of design tools (like 2D / 3D CAD (SolidWorks / ProE / UG), Excel, and in-house design calculations.
• Engaging with sales to support the quotation activities.
• Identifying, Own and Enable such initiatives which are in line with business objectives.

Fuel your passion

To be successful in this role you will:

• Have a Bachelor's in Mechanical Engineering (or) Equivalent from an accredited uni or college.
• Have a minimum 12-15 yr of experience in an Engineering Design / Analysis /Scientific / Technical Position.
• Have at least 7 yr of Control Valve and/or Safety valve Design Expertise.
• Demonstrate effective communication and interpersonal skills with the ability to work as a team.
• Have knowledge of control valve and/or safety valves including instrumentation and actuator.
• Have good understanding and experience in Valves regarding applications, Material of Construction, Non-Destructive Tests.
• Have experience with ASME B16.34 and PED, 3D design (Solid works/Ansys), mechanical design & tech writing.
• Have basic knowledge of manufacturing processes such as casting, machining, welding or cutting etc.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

Site engineers work chiefly on construction projects. They form part of construction management and use their skills and expertise to guide crew members and ensure the successful completion of a project. Site Engineers frequently liaise with clients and negotiate with vendors and suppliers to secure the best deals.

SINOTCC, an Engineering, Procurement and Construction (EPC) firm specializing in PROCESS and GENERAL CONSTRUCTION, is looking for a suitable candidate to fill up the role.

- Bachelor Degree in Engineering (major in HVAC, Mechanical, Electrical, Instrumentation).

- At least 5 years experience working in the Process & Construction Industry

- Independent, hardworking and self-motivated

- Willing to travel overseas (if needed)

- Willing to work over time

- 5.5 days work week

- Salary Negotiable

Location of Work : Jurong Island

The Resident Engineer shall be the Customer’s main point of contact on site in relation to the Long-Term Service Agreement (LTSA) and shall act as a technical representative of Mitsubishi Power (MPW) in relation to operation and maintenance of the Gas Turbine Combined Cycle (GTCC) Power Plant located in Jurong Island, Singapore.

The Resident Engineer needs to have strong technical knowledge in Gas Turbine Combined Cycle Power Plant. The role requires analyzing operational data to investigate various operation problems on turbines and auxiliary systems, trouble shooting a diverse range of problems that occur during operation and/or maintenance. With the support from the Singapore office and the Service Engineering Head Office in Japan, the Resident Engineer needs to be capable of providing solutions on an urgent basis.

The Resident Engineer must have experience completing Gas Turbine Combined Cycle Power Plant outages successfully and know how to coordinate with various internal stakeholders, vendors, technical advisors and local labour. The Resident Engineer must establish and maintain good working relationships with the Customer, ensuring that the customer’s technical issues and requirements are understood and addressed in an effective and timely manner.

The Resident Engineer shall be stationed at the site in Jurong Island during normal working hours (8 hours per day, 5 days per week, excluding public holidays), and at times when there is a substantial risk of Power Train operation interruption due to problems arising from the Power Train. As the Power Plant provides essential services, in the event of an emergency, the Resident Engineer shall be required to reach the Power Plant within specific required timeframe based on the service agreement with the customer, upon activation by the Customer to support the efficient recovery of the power plant.

Technical Support

The Resident Engineer shall act as the Customer’s interface for the flow of information to and from the Singapore office and Service Engineering Head Office in Japan. Such activities include but are not limited to:

· Establishing and maintaining good working relationships with the Customer, ensuring that the customer’s technical issues and requirements are understood and addressed in an effective and timely manner.

· Responding to and resolving internal and external customer requests for technical issues concerning relevant operation and maintenance matters of the GTCC Power Plant, making use of technical product knowledge and analytical skills while adhering to sound engineering principles, standards, practices and procedures.

· Communicating with and supporting the Customer to act on Technical Information notices to improve or upgrade the plant.

· Proactively identifying potential failures, assessing and controlling operational risks with support from the 24/7 remote monitoring hub and expert support

· Proactively advising and assisting the Customer in planning and executing relevant maintenance activities and coordinating with the Customer and MPW for the preparation of planned and unplanned inspection activities.

· Analyzing, tracking and reporting monthly Reliability, Availability, and Maintainability (RAM) data and relevant KPIs for the LTSA, for the purposes of invoicing and for monitoring performance · against the contractual guarantees and obligations. If necessary, recommend corrective actions.

· Reviewing and presenting the monthly monitoring diagnostic reports to the Customer.

· Reviewing and presenting the inspection findings and outage reports to the Customer.

Maintenance Work Coordination

The Resident Engineer shall be responsible for coordinating all activities provided by MPW under the LTSA, including but not limited to:

· Collaborating with the Customer, various MPW group resources (E.g. LTSA Program Manager, Technical Advisors, Field Services, Engineering) and Local Vendors (E.g. Labour, Onsite Machining, Local Workshop or other Third Party Services) in order to achieve the common goals with the Customer including but not limiting to health and safety, environmental protection, customer satisfaction, unit availability, reliability, performance and emissions

· Presenting and discussing with the Customer the scope and the planning of Planned/ Unplanned Maintenance

· Actively contributing in maintenance planning meetings, pre-outage and post-outage meetings between the Customer and MPW, confirming repair status with Repair Facilities.

· Supporting the Customer in the selection of spare parts to be kept on stock, aiming to increase the timely availability of necessary spare parts while optimizing inventory costs.

· Helping the Customer in selecting tools and equipment required for maintenance of the Covered Equipment.

· Coordinating dispatch of Parts and Technical Advisory Services

Troubleshooting/ Failure Investigations

The Resident Engineer shall be responsible to lead and/or support the troubleshooting of a diverse range of problems that may occur during Plant operation and/or Planned or Unplanned Maintenance, with the support from the Singapore office and Service Engineering Head Office in Japan. Such activities may include but are not limited to:

· Conducting fact-finding and communicating failure data between the Customer and MPW

· Analyzing operational data to investigate various operation problems on the Power Train and Auxiliary systems and suggesting necessary actions.

· Leading or supporting root cause analysis to determine the original cause of failures that led to plant trips or unplanned maintenance.

· Investigating problems that have occurred during maintenance works and be capable of providing solutions on urgent basis.

· Summarizing findings and conclusions in clear, logical and easily understood reports for external customers or internal departments.

Pre-requisites

Education level and relevant experiences

· Diploma/Degree in a relevant engineering or technical field

· More than 10 years of proven related work experience in the Power Industry

· Previous site work experience in Long Term Service Agreements, field service or maintenance and overhaul of CCGT power plants or industrial plants rotating equipment is preferable.

· Previous customer facing experience where there is regular interaction with plant personnel to provide support and resolve problems.

Knowledge and skills

· Knowledge of Gas Turbine Combined Cycle Power Plant Equipment operations and maintenance.

· Good communication skills.

· Able to develop and write clear and concise technical instructions, reports, specifications and recommendations.

· Able to work in a multidisciplinary team with people from different cultures and nationalities.

· Good Knowledge of MS Office software (Word, Excel & PowerPoint)

· Industry standard training courses on NDT, Machinery Diagnostics, Lubrication, Automation, Quality Control, Metrology would be an added advantage.

The Process Engineer reports to the Tender & Contracts Manager and is responsible for the below:

• Review Tender Documents, sourcing for materials, suppliers and vendors to obtain and review quotes.
• Communicate and negotiate with external vendors on pricing, scope & other contractual terms.
• Assist with tender documentations preparation, cost reports and cost plans, administer and evaluate tender process and submit tender proposal reports
• Administrative duties such as preparing bills of quantities.
• Arrange/attend to tender queries and clarification meetings.
• Follow up with the Project teams on variation order or change order, assess the associated variation costs.
• Support project teams for monthly progress claims and billings.

To be successful, you would possess these qualities and skills

• Bachelor’s degree in Mechanical/Chemical Engineering or equivalent.
• Min. 1-3 years of relevant working experience in Mechanical Services.
• Proficient knowledge in understanding Isometric drawings, Piping & Equipment GA drawings.
• Experience working in Semi-con, Data Centre, Pharma or O&G Green field construction is an advnatage
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Job Description

• REs shall provide standing supervision of all civil and structural works to ensure compliance with the following authorities' requirements:
• The inspection of the bus depot involves the demolition and removal of the existing Pasir Panjang Distripark. Following this, the construction will take place for main depot building, dormitory and administration office.
• Knowledge of construction methods, materials, and safety protocols
• Supervise and monitoring of contractors’ work to ensure they are carried out in accordance with the provision in the contract document.
• To monitor the progress and assist SRE/QP on structural inspection on all Structural works according to the approved drawings issued.
• To review and supervise safety, environmental and health matters.
• Review and comment on contractor's submissions.

Job Requirements

• The RE shall have minimum three (4) years of experience as a civil engineer; and have least two (2) years shall be in supervision of works similar in nature to the Works in the Civil Contract.
• All RE shall have a diploma in the civil discipline or equivalent and be accredited by JAC of IES/ACES as QSS.

Work During Office hour

Monday to Friday: 8:30 a.m. to 5:30 p.m.

Saturday: 8:30 a.m. to 12:30 p.m. (Willing to work on rotation shifts)

Sunday and Public Holiday: 00:00 hours onwards or otherwise advised by project officer depending on LTA’s contractor work schedule.

Job Responsibilities

• Ensure successful and timely execution of projects
• Work with Design Department on generating Workshop Drawings (GA / P&ID / Electrical drawings)
• Conducting Factory Acceptance Test (FAT)
• Attending site vists when required
• Engagement and coordination with sub-contractors and clients on projects

Job Requirements

• Minimally possess a Diploma in Electrical Engineering
• At least 2 years of work experience in project management
• Experienced in 2D electrical design and drawings
• Positive attitude and committed to tasks dedicated
• Ability to manage multiple priorities and meet deadlines
• 5 days work week (Monday to Friday)

Qualification & Requirements

• Min 2 years working experience preferable in fabrication environment.
• Familiar with welding works, steel structure, winch, crane and zone rated added advantages
• Knowledge of ISO 9001:2008 QA system
• Software – AutoCAD, Solidworks ,MS Office
• Strong communication skills. English speaking and writing is a must
• Resourceful, independent and detail oriented
• Diploma in Mechanical Engineering or equivalent

Key Responsibilities

• Assist the department Manager(s) on project tendering including technical review, sourcing and cost estimating, project scheduling, drawings, procedures and documentation preparation etc.
• Overseeing of project execution as directed by Department manager including contract review (technical), vendors selection, costs evaluation, liaison for internal resources and supports, reply to client technical queries, prepare technical clarifications, plan and supervise project schedule , project execution and implementation, plan and implementation of corrective actions, Factory Acceptance Tests and finalization of as built documentation etc.
• Perform other ad hoc duties as assigned

Responsibilities:

• Design and produce single line diagrams of electrical/instrument system and determine the interface/termination diagrams in accordance with equipment specifications.
• Size cables and breakers LV/MV according to applicable rules and regulations.
• Review all electrical equipment, vendor’s proposals for technical accuracy and constructability
• Prepare material take off for bulk material orders of power and control cables, cable trays and ladders and various ship electrical equipment and systems according to project contract specifications.
• Prepare electrical equipment foundations/supports and room arrangement/layout, lighting layout, power/control cableway plan, power/control cables routing plan and cable schedules.
• Interface, size and design electrical equipment capacity e.g. switchboards, transformers, navigation, PABX, LAN and fire & gas systems, etc.
• Prepare electrical installation construction standard according to IEC/IEEE shipbuilding practice and international standard.
• Coordinate/execute contract specification requirements and production inputs into engineering drawing/document.
• Provide progress reporting and schedule management of engineering deliverables.
• Coordinate with other production team members, subcontractors and consultants to resolve technical issues onsite which affect the electrical schedule and project deliverables.
• Perform site visits to solve engineering problems when required to determine existing conditions or verify new construction.
• Meet with vendors, client reps, accreditation representatives when required.
• Review and reply to class comments
• Perform any other tasks as may be assigned by the supervisor
• Ensure compliance to relevant government regulations and company’s quality, safety, health and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum 3 years of relevant experience working in a marine/offshore industry either with shipyards or marine equipment manufacturers and a Diploma in Electrical Engineering or related engineering discipline or minimum 6 years of experience working in a marine/offshore industry either with shipyards or marine equipment manufacturers.
• Familiarity with Marine & Offshore rules, regulations and requirements.
• Knowledge of Intergraph Software will be an added advantage.
• Good communication skills, meticulous, resourceful, able to multi-task

RESPONSIBILITIES
Able to utilize advanced skills to perform complex preventive maintenance and corrective repair of buildings, industrial systems, vehicles, equipment and grounds. Working under limited supervision, monitors building system operations and performance. Utilizes several trade skills such as carpentry, plumbing, electrical, painting, roofing, heating and cooling.Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Inspects building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client.

Oversees and inspects the work performed by outside contractors. Contracted work includes landscaping, snow removal, remodeling, HVAC, plumbers, and cleaning.

Performs assigned repairs, emergency and preventive maintenance. Completes maintenance and repair records as required.

Reviews assigned work orders. Estimates time and materials needed to complete repair. Orders necessary materials and supplies to complete all tasks.

Maintains an energy management program to ensure measures are taken to operate all systems in the most efficient manner to keep operating costs at a minimum.

Maintains the building lighting system, including element and ballast repairs or replacements.

Performs welding, carpentry, furniture assembly and locksmith tasks as needed.

Responds quickly to emergency situations, summoning additional assistance as needed.

Performs other duties as assigned.

Responsibilities:

1. Develop distributed artificial intelligence systems and deploy them on large-scale clusters or clouds.
2. Develop and optimize algorithm systems from specific scenarios and problems, and produce solutions applied to the scenarios.
3. Participate in the integration design and optimization of artificial intelligence technology and existing tools to improve product performance.
4. Write high-quality scientific papers and have the opportunity to serve as the first author of important papers.

Requirements:

1. Proficient in TensorFlow/PyTorch, Ray/DeepSpeed/NVIDIA Megatron, and familiar with the internal operating mechanisms of these systems.
2. Familiar with various optimization algorithms and model architectures, proficient in Python or C++ optimization algorithm libraries, including various classical algorithms and models based on gradients (BERT, GPT-3, Swin Transformer, ViT, MLP-Mixer).
3. Familiar with SaaS, architecture, compilers, networks, CUDA, and other related knowledge or have relevant project experience.
4. Strong programming and engineering implementation abilities. Those who have won programming competition awards or published high-quality papers will be given priority in recruitment.
5. Bachelor's degree or above from 211, 985, or overseas well-known universities, majoring in computer science, software engineering, electronic information, automation, mathematics, physics, or other artificial intelligence-related majors.