• Responsible for all site works and activities
• Ensure effective project planning and implementation, efficient use of resources, and proper co-ordination and delegation of works to successfully complete project by the contractual deadline and within the budgeted cost.
• Ensure all works carried out meet company’s quality standards and requirements
• Engage and coordinate internal resources, engineers, consultants, and solar installers in preparation and execution of project plans through completion.
• Review and take ownership of project budgets including cost of permits and fees, third-party consultants, and construction costs for off-site, site work.
• To ensure site supervisors, foremen and workers comply with client & regulatory requirements
• To ensure high Environmental, Safety and Health standards are upheld on site at all times
• Other ad hoc duties assigned by company from time to time

Qualification & Requirements

• Min 2 years working experience preferable in fabrication environment.
• Familiar with welding works, steel structure, winch, crane and zone rated added advantages
• Knowledge of ISO 9001:2008 QA system
• Software – AutoCAD, Solidworks ,MS Office
• Strong communication skills. English speaking and writing is a must
• Resourceful, independent and detail oriented
• Diploma in Mechanical Engineering or equivalent

Key Responsibilities

• Assist the department Manager(s) on project tendering including technical review, sourcing and cost estimating, project scheduling, drawings, procedures and documentation preparation etc.
• Overseeing of project execution as directed by Department manager including contract review (technical), vendors selection, costs evaluation, liaison for internal resources and supports, reply to client technical queries, prepare technical clarifications, plan and supervise project schedule , project execution and implementation, plan and implementation of corrective actions, Factory Acceptance Tests and finalization of as built documentation etc.
• Perform other ad hoc duties as assigned

Job Responsibilities

• Ensure successful and timely execution of projects
• Work with Design Department on generating Workshop Drawings (GA / P&ID / Electrical drawings)
• Conducting Factory Acceptance Test (FAT)
• Attending site vists when required
• Engagement and coordination with sub-contractors and clients on projects

Job Requirements

• Minimally possess a Diploma in Electrical Engineering
• At least 2 years of work experience in project management
• Experienced in 2D electrical design and drawings
• Positive attitude and committed to tasks dedicated
• Ability to manage multiple priorities and meet deadlines
• 5 days work week (Monday to Friday)

Job Description

• Manage the company’s projects
• Coordinate between client, company, factory and work site staff
• Work on ensuring good quality and maintain delivery schedules
• Liaise with QA/QC for the third party/client inspections, class survey certification, etc

Requirements

• Degree in structural / marine / naval architecture / civil / mechanical engineering
• Min 2 years of working experience in similar industry
• Good written and spoken English
• Experience in quality assurance and project management, preferably in the construction, marine, or offshore industry
• Leadership qualities expected
• Able to plan and manage project independently
• Come and convince us why you are the best person for the job

PROJECT ENGINEER will be under service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.Working in workshop and vessels.
Good communication skills with Ship Owners and Superindents.
Good time Management and work Independently.
To perform any other duties & Responsibilities assigned by superiors from time to time.
Ability to demonstrate and implement cost -saving measures.
Ability to lead to manage project operations, schedule and specifications.
Requirements:- Min 5 Years experience .- Knowledge of MS office.- Able to work OT.- Excellent coordination skills.-

RESPONSIBILITIES
Able to utilize advanced skills to perform complex preventive maintenance and corrective repair of buildings, industrial systems, vehicles, equipment and grounds. Working under limited supervision, monitors building system operations and performance. Utilizes several trade skills such as carpentry, plumbing, electrical, painting, roofing, heating and cooling.Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Inspects building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client.

Oversees and inspects the work performed by outside contractors. Contracted work includes landscaping, snow removal, remodeling, HVAC, plumbers, and cleaning.

Performs assigned repairs, emergency and preventive maintenance. Completes maintenance and repair records as required.

Reviews assigned work orders. Estimates time and materials needed to complete repair. Orders necessary materials and supplies to complete all tasks.

Maintains an energy management program to ensure measures are taken to operate all systems in the most efficient manner to keep operating costs at a minimum.

Maintains the building lighting system, including element and ballast repairs or replacements.

Performs welding, carpentry, furniture assembly and locksmith tasks as needed.

Responds quickly to emergency situations, summoning additional assistance as needed.

Performs other duties as assigned.

Job Description:

• Provide pre and after sales technical support to customers
• Perform field service work on site for our range of products
• To clarify product applicaton issues with head office R&D in Japan
• Support Sales Engineers in the areas of product applications, sizing and selection of suitable SMC components to meet end user requirement

Job Requirement:

• Diploma in Electronics/Mechatronics
• Experience in control system (servo drive)
• Minimum 5 years of experience in PLC programming (Omron, Panasonic, Beckhoff, Allen Bradley etc) for senior position

Role Overview:

We are seeking an experienced QA Engineer with a strong background in the oil and gas sector, specifically in FPSO projects. The QA Engineer will be responsible for ensuring that all quality assurance and quality control procedures are in place, adhered to, and continuously improved throughout the project lifecycle.

Key Responsibilities:

1. Quality Management System (QMS):
   Develop, implement, and maintain the project-specific Quality Management System in alignment with ISO standards.
   Ensure compliance with company policies, client requirements, and regulatory standards.
2. Project QA Oversight:
   Conduct regular quality audits, inspections, and surveillance activities on FPSO project sites.
   Identify and document non-conformances, and lead the resolution process to prevent recurrence.
   Ensure that all QA documentation is properly maintained and accessible.
3. Supplier and Vendor Quality Control:
   Review and approve vendor QA/QC documentation.
   Conduct supplier audits to ensure compliance with project quality requirements.
   Coordinate with procurement teams to ensure that materials and equipment meet quality specifications.
4. Engineering & Fabrication Quality Assurance:
   Ensure that engineering designs, drawings, and specifications comply with quality requirements.
   Monitor fabrication and construction activities to ensure they are carried out according to approved procedures and quality standards.
5. Testing & Commissioning:
   Oversee testing and commissioning processes to ensure systems meet quality standards before handover.
   Verify that all test procedures and results are properly documented.
6. Risk Management:
   Identify potential quality risks and implement mitigating measures.
   Participate in risk assessments and HSE (Health, Safety, and Environment) meetings.
7. Training and Continuous Improvement:
   Provide training to project teams on quality processes and best practices.
   Promote a culture of continuous improvement by identifying opportunities for process optimization.

Qualifications:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 5 years of experience in a QA role within the oil and gas industry, with specific experience in FPSO projects.
• In-depth knowledge of quality management systems (e.g., ISO 9001) and industry standards.
• Strong understanding of fabrication, construction, and commissioning processes for FPSOs.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership skills.
• Certification in quality auditing (e.g., ISO 9001 Lead Auditor) is an advantage.

- Provide support to operations maintenance staff in their work flow, maintaining, repairing and installation of HVAC units and Refrigeration systems. (Main tasks of the job scope)

- Mechanical general work

- Other ad-hoc duties as assigned

Job Requirements:

- Monday to Friday, 8am to 5pm

- Saturaday, 8am to 12pm

- Must be able to support OT on weekdays / weekends if needed

Interested applicant, please resume to [email protected]

Benefits:

• Working Hours: 8 am-6 pm (6 days)
• 14 days Annual Leave after confirmation
• 14 days Medical Leave (completion of 3 months service)
• $200 medical claim per year
• Performance Bonus (Discretionary)

Job Description:

• Site project management
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operation, site coordination, monitoring and reporting work progress
• Other ad-hoc duties as assigned

Requirements:

• Bachelor’s Degree in Civil Engineering / Geology or relevant vocational certificate
• Able to speak and write in English and Chinese in order to communicate effectively with Chinese-speaking clients and associates.
• Knowledge of geotechnical engineering or soil data interpretation or Singapore Geology
• A good team player, self-driven and willing to take responsibility for assigned tasks as project engineer/manager
• Preferably Engineer specialized in Engineering / Civil / Construction / Structural or equivalent
• Only Singaporeans

You may send your resume / CV to email address directly:

[email protected]

Project Engineer

This role is a newly expanded role for a European MNC who is a APAC leader in industrial and material handling products, services, and solutions for various application such as automated warehousing, building maintenance, automotive and others. Come join this role and be part of the active players in this growing industries

Key Roles and Responsibilities

· Report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.

· Assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.

· Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.

· Manage day to day project activities including scheduling, coordinating and monitoring and reporting update of projects

· To supervise the execution of the works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract document

· To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.

· Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist in verifying progress payments and claims from Contractors.

· Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule

· Establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.

· Be the primary focal point between various parties

Qualifications & Experience

· Diploma or Bachelor’s Degree in Electrical Engineering/Electronics/Control Systems Engineering or related disciplines

Preferred Skills & Characteristics

· Self-starter and ability to self-manage strong interpersonal and leadership skills

· Must have high level of integrity, able to generate trust and build alliances with co-workers

· Familiar with Job Safety Analysis, Work Method Statement and Permit to Work application requirements and procedures

· Ability to maintain good project documentation and is familiar with ISO documentation requirements

· Safety certifications such as Working at Height, Construction Safety Orientation Course etc. is advantegeous

· Basic knowledge on Industrial Control Real Time Systems such as PLC/SCADA/IoT

· Additional skills in AutoCAD, Revit and Microsoft Office are advantageous

If you are keen to apply for this role, please click auto-apply

HRLinked Asia Search & Consultancy Pte Ltd (Registration No: 201910702W)

Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

5. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them

6. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.

7. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

Job Title: Project Engineer

Occupation: Mechanical Engineer / Fire Protection Engineer

Industry: Industrial Pump Supply

Job Highlights

• 5 Days Work Week
• Attractive Employee Benefits
• Guaranteed 1-Month Bonus + Attractive Sales Incentive
• Work-Life Balance
• Ample Opportunities for Growth

Job Description

We are seeking a dedicated Project Engineer to support our growing team.

As a key player in the company, you will:

• Support the Project Team in pump selection, quotations, technical documentation, and drawings
• Follow up with customers and suppliers on inquiries and orders
• Liaise with customers, suppliers, and internal departments to ensure project deadlines are met
• Initiate and request orders for required project supplies
• Coordinate project timelines and resources

Requirements

To be successful in this role, candidates should have:

• A minimum of a Diploma in Mechanical Engineering or a relevant field
• Project coordination experience
• Strong critical thinking and time management skills
• Ability to work independently in a fast-paced environment
• Analytical, detailed-oriented, flexible, and dynamic mindset
• Strong written and verbal communication skills
• 2D AutoCAD skills are essential (Good AutoCAD skills are an advantage)
• A Class 3 Driving License is preferred but not mandatory

Skills Required

• Project Coordination
• Mechanical Engineering
• AutoCAD (2D)
• Technical Documentation
• Time Management
• Verbal Communication
• Critical Thinking
• Project Management
• Commissioning
• Ability to work independently

Layout Engineer for Silicon IP development

We are looking for an Integrated Circuit (IC) layout engineer for silicon IP development for emerging satellite and high-reliability applications.

Job Description

· Develop digital and analog library cells in various technologies (e.g. CMOS & SOI)

· Layout digital cells for various trade-offs (including speed, power, area, reliability)

· Layout analog circuits and IO circuits

· Characterize digital cell cells for timing and power analyses

· Construct test structures for validating various digital and analog cells

· Analyze the reliability issues (e.g. soft-errors) for various digital cells

· Support the front-end team for System-on-Chip (SoC) integration

· Document the development of digital and analog cells

Minimum Qualifications

· Possess at least a Bachelor Degree or equivalent in Electrical & Electronic Engineering or any related field with background on Integrated Circuit Design (both Analog and Digital)

· Knowledge in Electronic Design Automation (EDA) tools (e.g. Cadence, Synopsys, Silvaco)

· Knowledge in cell characterization tools (e.g. Liberate or SiliconSmart or Viola)

· Knowledge in Application Specific Integrated Circuit (ASIC) designs (full custom design methodology)

· Knowledge in digital circuit reliability issues (e.g. latch-up, soft error rates, aging, threshold voltage shift, etc.)

· Experience in digital foundation library cell development (e.g. combinational cells, sequential logic cell, memory cells, IOs)

· Experience in library cell characterization (e.g. understanding in various timing and power models)

· Experience on circuit testing

· Proficiency in English

OceanSTAR Elite Group is a leading provider of innovative solutions in the oil and gas and marine energy sectors, with a strong focus on FPSO (Floating Production Storage and Offloading) projects. We are committed to delivering cutting-edge engineering services that drive operational excellence and sustainability.

We are currently seeking a skilled Electrical Engineer to join our team and support the design, operation, and maintenance of electrical systems on FPSO vessels.

Key Responsibilities

Job Responsibilities

• Report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.
• Assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.
• Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
• Manage day to day project activities including scheduling, coordinating and monitoring and reporting update of projects
• To supervise the execution of the works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract document
• To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist in verifying progress payments and claims from Contractors.
• Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule
• Establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.
• Be responsible for any other duties that may be assigned from time to time as your superior/management deem fit.
• Be the primary focal point between various parties

Qualifications & Experience

• Diploma or Bachelor’s Degree in Electrical Engineering/Electronics/Control Systems Engineering or related disciplines

Preferred Skills & Characteristics

• Self-starter and ability to self-manage strong interpersonal and leadership skills
• Demonstrated oral and written communication skills
• Must have high level of integrity, able to generate trust and build alliances with co-workers
• Able to communicate effectively & diversely for prompt resolution to site matters
• Able to work independently, take initiative and willing to work overtime/weekends (when needed)
• Ability to foresee and resolve issues before surfacing would be an added advantage
• Familiar with Job Safety Analysis, Work Method Statement and Permit to Work application requirements and procedures
• Ability to maintain good project documentation and is familiar with ISO documentation requirements
• Safety certifications such as Working at Height, Construction Safety Orientation Course etc. preferred
• Mandarin speaking preferred as will be liaising with overseas vendors
• Basic knowledge on Industrial Control Real Time Systems such as PLC/SCADA/IoT
• Basic programming skills in VB, C, C++, Java, C# etc is advantageous
• Additional skills in AutoCAD, Revit and Microsoft Office are advantageous

Position Overview: We are seeking a dedicated and detail-oriented Quality Engineer to join our team. The successful candidate will be responsible for ensuring the quality of low voltage switchboard panels to meet industry standards and client requirements. This role requires a strong understanding of electrical systems, testing procedures, and quality assurance.

Key Responsibilities:

• Conduct comprehensive testing of low voltage switchboard panels, including insulation resistance tests, contact resistance tests, high voltage tests and function tests.
• Perform inspections and audits of electromechanical assemblies to ensure compliance with applicable standards and specifications.
• Document test results and prepare detailed reports for internal and client review.
• Collaborate with design and manufacturing teams to identify and resolve any issues or discrepancies.
• Ensure all testing equipment is calibrated and maintained in good working condition.
• Participate in continuous improvement initiatives to enhance testing processes and procedures.
• Train production staff on quality control processes and provide guidance on quality-related matters.
• Stay updated with industry standards and advancements in testing methodologies.
• Ensure the quality of products meets the required standards and specifications.
• Support onsite testing, FAT, SAT and troubleshooting activities, if necessary.

Qualifications:

• Minimum Diploma in Electrical Engineering or a related field.
• Minimum of 2 years of experience in testing low voltage switchboard panels or similar electrical equipment.
• Strong knowledge of electrical testing procedures and standards (e.g., IEC 61439).
• Proficiency in using testing equipment and tools.
• Excellent analytical and problem-solving skills.
• Strong attention to detail and accuracy.
• Good communication and teamwork skills.
• Ability to work independently and manage multiple tasks effectively.

Preferred Qualifications:

Certification in electrical testing or quality control.

Responsibilities:

• Architect and implement transformative software solutions using the latest technology trends
• Lead in the design and development of key features, propelling our product portfolio to new heights
• Collaborate with multidisciplinary teams to build robust, scalable systems
• Contribute to creating high-quality, innovative software that meets the evolving needs of our clients
• Stay ahead of industry trends, harnessing emerging technologies to enhance our software solutions

Requirements:

• Degree in Computer Science/Computer Engineering/Information Technology or a related field
• A .NET guru with a deep understanding of modern software architectures, microservices, and API development
• Experienced in cloud-based development, containerization (Docker/Kubernetes), and infrastructure as code (Terraform/Ansible)
• A database wizard, adept in designing, managing, and optimizing databases (SQL, NoSQL, etc.), with a solid foundation in data analysis and machine learning
• Versatile across various operating systems including Linux, Mac OS, Windows
• An excellent problem solver with a keen eye for detail, and experience in agile methodologies and DevOps practices
• Familiarity with React.js, Node.js, and other frontend technologies would be an added advantage
• Candidates with more years of related work experience may be considered for a senior position
• Remuneration will be commensurate with experience

Engineering Project Managers are pivotal in steering complex engineering projects from conception to completion, ensuring that technical solutions are delivered on time, within budget, and to the required quality standards

Defining project scope, goals, and deliverables in collaboration with senior management and stakeholders

Developing detailed project plans that outline specific engineering tasks, timelines, and resource allocations

Coordinating cross-functional teams of engineers, designers, and technical staff to ensure project milestones are met

Managing project budgets, including cost estimation, budget tracking, and financial reporting

Ensuring compliance with industry standards, regulatory requirements, and company policies

Identifying, assessing, and mitigating project risks and issues throughout the project lifecycle

Communicating effectively with stakeholders to provide project updates, gather feedback, and make informed decisions

Conducting post-project evaluation to identify successful elements and areas for improvement for future projects

Continuously updating project documentation and maintaining accurate records for all project-related information

Leading and motivating project teams, providing guidance and support to foster a collaborative work environment

Leading and motivating project teams; assigning tasks and deadlines

Managing project budgets and resources, including adjustments as necessary

Identifying, assessing, and minimizing project risks throughout the project lifecycle

Directing the allocation of resources across various projects for optimal efficiency

• To plan and execute corrective/preventive maintenance on facility equipment and production equipment to ensure good efficiency and availability.
• Implement TPM program in HPSL such as autonomous maintenance and critical spare part management.
• Engage external equipment vendor for service contract and ad hoc diagnostic or corrective maintenance activities.

Support safety and EHS related activities and audits.

Description of Responsibilities and Duties

1. Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
2. Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
3. Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
4. Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
5. Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
6. Perform site EHSS inspection/audits and ensure that all corrective / preventive actions are close in timely manner. Responsible for internal/external audits and EHSS activities.
7. Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
8. Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Knowledge:

• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.

Skills:

• Able to read electrical, hydraulic, pneumatic and mechanical diagrams and carried out maintenance work accordingly.
• Lead and guide technicians on above work.

Abilities:

• Operational hands-on experience
• Work under pressure and multi-tasking.
• A good team player and have good interpersonal skills
• Safety conscious

Education:

Degree/Diploma in Mechanical Engineering or equivalent

Experience:

• Minimum 5 years of relevant working experiences
• Experience in chemical and mechanical process

Competencies:

• Fast Learner
• Willingness to learn
• Self-Initiative
• Team Spirit
• Self-responsibility
• Physical Fit

Working Conditions:

Chemical Production Environment. A skin allergy/blood count medical test may be required as part of the employment medical checkup.

Position : Steel Structural Engineer

Roles and Responsibilities

· Candidate must possesses Steel Structures and/or related experience.

· Liaise and coordinate with consultants, client, main contractor, other contractor and authority

· Manage site supervisor and workers to perform according to planning

· To review the shop drawings before submitting to consultants for final approval.

· To coordinate with design consultants for structural submissions to relevant Authorities.

· To review structural submission drawings and design reports prepared by consultants in terms of feasibility for construction.

· To assist the Project Manager in the daily activities of work

· Proficiency in Tekla Software , Autocad

Requirements

· Degree in Civil / Structural Engineering / Mechanical

· Min 2 years structural coordinator experience

· Good knowledge of Structural specifications & requirements

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

Geotechnical:

- Familiar with the design of earth retaining and stabilizing structures, deep foundations, reclamations, slope stabilities.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Descriptions

1. Manage the day-to-day sales activities for the semiconductor manufacturing equipment products (e.g. CMP tool) within the designated sales territory so as to achieve the sales target set by management.
2. Monitor, regulate and direct the activities of the sales representatives to maximize the market opportunities.
3. To make forecasts / targets regularly and to monitor performance of the sales team in relation to these forecasts. Manager is expected to make directions for the team to achieve these sales targets
4. To drive new marketing promotion efforts and to work with EC on the implementing the marketing and promotions efforts for the semiconductor manufacturing equipment products (e.g. CMP tool)
5. To make, develop and manage the localized marketing and sales program for the sales territory.
6. To communicate with the sales team to understand customer demands and offer sales support where necessary.
7. To work with EC to set the industry pricing level.
8. To manage the SAP ERP system for monitoring the progress of quotations, purchase orders, delivery and invoicing of customers.
9. To work closely with EC on the new accounts and new products, using the local team to win new contracts.
10. Establish customer rapport an acceptance
11. Any other duties as assigned by the management

Job Requirements

1. Knowledge of commercial and shipping documents (Incoterms)
2. Knowledge of the semiconductor manufacturing equipment products(e.g. CMP Tools).
3. Diploma/Degree in Engineering or equivalent
4. Good people skills with a pleasant personality.
5. Strong communication, interpersonal and customer service skills.
6. Excellent presentation and negotiation skills.
7. Ability to work independently as well as collaboratively within the team.
8. Must be prepared to travel overseas for training and to our customers’ location in the region as required.

Preferably to have Sales work experience in Japanese company in semiconductor industry for more than 5 years.

(Those without the relevant experience may be appointed as Senior Sales Engineer initially with a view to be upgraded later)

(Those with more years of relevant experience may be appointed to a relevant management position)

Benefits

• 10days AL
• AWS
• VB depending of the team and company performance
• Transport allowance

Working Hours

• 5 days (9am to 6pm)
• Monday to Friday

. JOB DESCRIPTION

Job Description & Requirements

1. Experience in metal fabrication n installation works

2. Proficent in mechanical engineering drawings n autocad

3. Perform project management n supervise site works

4. Able to coordinate with customer, Vendors n fellow workers to meet project dateline

5. Posses a class 3 licence with driving experience

Retrofit Engineer

Do you enjoy being part of team that provides high-quality services for our customers?

Would you like to be in a team delivering world class service to our customers?

Be part of a successful Customer Service team

Baker Hughes Valves is a global technology company that designs, develops and manufactures the highest quality, most accurate and reliable control valves and safety valves products, services and solutions to our customers across a large range of process industries.

Partner with the best

As a Retrofit Engineer, you will be in charge of BoM and technical support for Pressure Safety Valves (Consolidated) and Control Valves (Masoneilan). You will also provide a global engineering support focused on Channel Partners and Aftermarket Centers for the selection, repair, maintenance, and replacement of Masoneilan and Consolidated products.

As a Retrofit Engineer, you will be responsible for:

• Executing design and analysis of assigned projects to develop valves meeting customer application needs, specification requirements, complying with local design/product standards.
• Reviewing customer specifications and “translating” customer specification in to order instructions for manufacturing of valves.
• Providing Retrofit solutions, with bills of material, drawing information, test specifications and processing instructions to meet quality and manufacturing requirements.
• Creating the design review process, ensuring accuracy, quality and design for manufacturability goals are met.
• Enabling the use of design tools (like 2D / 3D CAD (SolidWorks / ProE / UG), Excel, and in-house design calculations.
• Engaging with sales to support the quotation activities.
• Identifying, Own and Enable such initiatives which are in line with business objectives.

Fuel your passion

To be successful in this role you will:

• Have a Bachelor's in Mechanical Engineering (or) Equivalent from an accredited uni or college.
• Have a minimum 12-15 yr of experience in an Engineering Design / Analysis /Scientific / Technical Position.
• Have at least 7 yr of Control Valve and/or Safety valve Design Expertise.
• Demonstrate effective communication and interpersonal skills with the ability to work as a team.
• Have knowledge of control valve and/or safety valves including instrumentation and actuator.
• Have good understanding and experience in Valves regarding applications, Material of Construction, Non-Destructive Tests.
• Have experience with ASME B16.34 and PED, 3D design (Solid works/Ansys), mechanical design & tech writing.
• Have basic knowledge of manufacturing processes such as casting, machining, welding or cutting etc.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits