Japanese MNC

Salary $3000-$5000

Location: Chai Chee

Industry: Electronic Component Manufacturer

Monday to Friday 8am to 5pm

Job Roles

• Work closely with distribution channels
• Coordinate/execute strategies together with Sales/Product Team
• In-charge of Sales cycle including ensuring A/R conditions are met
• Flexible in thinking out of box in managing partners/product strategy

Requirements

• Diploma in any discipline
• Willing to learn & travel oversea (ASEAN region)
• Training provided

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Position: Quality Assurance QA/QC Engineer (MUST BE from Marine Engineering)
• Location: North Bridge Road (Walking distance from Fort Canning MRT Station)
• Working hours : 5 days / Monday - Friday - 9.30am -5.30pm
• Salary (Commensurate with experience): Basic up to $ 3700 + AWS + 14 days Annual Leave
• Duration : Permanent
• Industry : Global leader in Marine Lifting Equipment

Main Responsibilities:

• Perform inspection of incoming products, materials or customer items according to job project requirement
• Perform initial inspection and raise report
• Perform in-process inspection according to procedures and customer’s specifications. Raise report whenever necessary. Measure and record the dimension of components/parts using measuring instruments and analyse the findings for discrepancy
• Perform final inspection of items including dimensional and NDT to ensure that all quality requirements has been achieved. Analyse result and decide the acceptance level of the final product
• Prepare and conduct Project Specific Quality requirements training to production Supervisors and Sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Support QA/QC Manager for establishing WPS, PQR and WQT Qualifications.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of Inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.

Requirements:

• Degree in Engineering or Diploma in Mechanical/ Marine Engineering or equivalent
• Experience in handling project Audit and liaise with internal & external auditor
• Knowledge in structural fabrication, piping isometric drawing and materials
• Experience in piping line walk, reinstatement inspections by clear understanding of isometric drawings

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Our client provides products and solutions to hospitals in Singapore.

• Develop and execute validation protocols for washers and sterilizers used in hospital settings.
• Support regulatory submissions and inspections, providing necessary documentation and evidence of compliance.
• Ensure documentation is complete, accurate, and audit-ready.

Requirements:

• Degree in Biomedical Engineering
• At least 2 years experience testing Central Sterile Supply Departments and/or water treatment systems.
• Excellent analytical, problem-solving, and communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Active participation in the NPI (New Product Introduction) team to successfully integrate a new product into the company's manufacturing process.
• Responsible for planning, scheduling, executing, and coordinating technical and managerial project aspects, includes assisting in the development of project proposals.
• Overseeing projects closely from the kick-off stage through to the pre-mass production phase.
• Responsible for managing project procurement and overseeing vendor relationships.
• Responsible for creating and managing engineering documents, drawings, and specifications from vendors and customers, ensuring all project documentation is complete before handover to production.

Requirements:

• At least a diploma in engineering field with 2 years of related experience in project management preferably in manufacturing environment

If you are interested, please send in your updated resume by clicking “Apply now” or email to [email protected]

Lim Siew Hua

Registration Number: R1984199

Workstone Pte Ltd

EA License Number: 19C9998

(Only shortlisted candidates will be notified.)

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• Kaki Bukit (East)

Your Responsibilities: -

• Generate mechanical drawings
• Coordinate with customers about requirements and feedbacks
• Ensure drawings are in correct specification and requirements
• Follow-up of assembly and installation work

You will need: -

• No experience required, traning provided

Apply now or email to [email protected]

Good luck! Only shortlisted candidates would be notified.

Ho Tze Chin (Kenny) R1762905 Recruit Lync Pte Ltd 22C1000

We are currently hiring permanent consultants as DevOps Engineers for new long-term projects for our Banking Clients, whose department is responsible for the development and maintenance of Capital Market applications used by worldwide users covering Transversal GMD & MCR, T2R, Front Office, Back Office, and Finance domains.

The Engineer will work on Market Risk, Counterparty Risk & Referential Collateral critical applications for the bank with strict response times and SLA to respect.

The Engineer will work on below main roles.

• Industrialization: Implement all necessary tools to manage the environments, the continuous integration, the continuous delivery and the processes execution.
• Environments: Manage and administrate environments from assembly to production (rules included), infrastructure implementation, operational usage.
• Operations: Execute the maintenance operations, delivery and environment monitoring.
• L3: Operate as L3 on non-production environments for delivery teams and also on production for support teams.

Job Responsibilities:

• Participate in the automation of the deployment solution.
• Participate in environment preparation for testing phases.
• Participate in developing tools to simplify day-to-day activities on the program.
• Facilitate coordination between program developers and infrastructure engineers.
• Ensure continuous improvement and maintenance of the CI-CD pipeline.
• Provide investigation help while fostering knowledge and sharing best practices with team members.
• Document processes and ensure they are properly followed.
• Ensure high-standard delivery to production.
• The position requires autonomy and reliability in performing duties while maintaining close communication with the rest of the project/support team.

Job Requirements:

Mandatory

• At least 3 years in Software development or DevOps team.
• At least 2 years in Java/J2EE development
• At least 2-year experience with Jenkins, GIT (GitLab)
• At least 1-year experience in Ansible
• At least 1-year experience in GitLAb
• Experience with DevOps methodology & tools like Jenkins, GIT (GitLab), Ansible, Docker/ Kurbernetes, CICD pipeline, Java dev context for the tooling, Database or Big Data storage systems, Grafana / Prometheus / Alert Manager / ELK / Kibana, Jira
• Experience in grid computing
• Basic understanding of finance and investment banking especially Market Risk.

Other Professional Skills and Mindset

• Excellent written and verbal communication skills for both teammates and management
• Strong analytical and problem-solving skills
• Proficient software development life cycle
• Appetite to follow technology trends and participate in communities
• Passion for sharing expertise and growing team members’ skills
• Interest in learning from team members and mentoring junior team members on the path of high-quality deliverables

Job Description:

• Develop and maintain quality management systems (QMS) in the pharmaceutical industry
• Ensure GMP compliance throughout manufacturing processes
• Conduct internal and external audits to evaluate processes and identify improvements
• Review and approve batch records, ensuring proper documentation and compliance
• Monitor batch control processes, investigating and addressing deviations
• Perform Installation Qualifications (IQs) and Operational Qualifications (OQs) for equipment and systems
• Manage Change Control processes, ensuring regulatory compliance for process changes
• Investigate deviations, identify root causes, and implement corrective and preventive actions (CAPA)
• Collaborate with cross-functional teams to ensure product quality and regulatory compliance

Requirements:

• Min Bachelor's degree in Engineering/Chemical/Biochemistry/Life Sciences or any related discipline.
• Strong knowledge in GMP
• Prior experience in Pharma, Change/Batch Control
• Able to commence immediately

For interested candidates, please send your most recent and updated resume to [email protected]
or WA me at +6596698692

Alicia Cheong Ling Wei

R1104785

Recruit Express Pte Ltd

EA License No. 99C4599

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Engineer (API Q1/Q2) to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Ensuring that corrective measures and deviations meet with the standards
• Responsible for the creating and executing methods and procedures for whole process of production equipment (e.g. the inspection, testing, and evaluation of the products).

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

working location: Ang Mo Kio , Yio Chu Kang, Central

Job Description

Manage & Lead the electrical team.

Perform engineering duties such as design, engineering calculations, planning, tender. Preparation/evaluations as part of the engineering project team

Team development QA/QC documentation review of engineering deliverables

Liaison with clients, project managers, architects, contractors

Resolve any technical problems faced during project design and/or construction stages

Suggests ways to increase revenues and efficiency.

Testing & Commissioning of the ACMV Electrical Systems

Ensure the team follows all electrical codes and standards.

Job Requirements

Any qualification in a relevant engineering field with minimum 5 years of related working experience in the Construction Electrical Field associated with ACMV / Electrical.

Engineering design of commercial buildings, major infrastructure transportation projects and mixed-use developments

Possess design experience and good understanding of ACMV / Electrical technical systems and procedures.

Possess knowledge on all cabling, loading and sizing calculations and equipment selections such as cable, generators, panels, etc.

Develop, design through establishing, design briefs, design reports, calculations, schematics, schedules, specifications, concept, Preliminary, Detailed and Construction Engineering Designs

Productions of drawings and developing models Site Experience, Testing & Commissioning Experience Having experience working with Infrastructure Projects would be an added advantage.

*Able to start work within short notice will be highly advantageous.*

Please be notified that only shortlisted candidates will be notified

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: YEO AHN AHN

EA Personnel No: R22109014

EA License No: 21C0845

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Responsibilities:

• Review and analyze experimental process flows: Identify defect anomalies and quarantine out-of-control process tools.
• Embrace continuous improvement: Seek ways to enhance operations
• Raise awareness of process anomalies: Recognize and communicate issues promptly.
• Leverage inline process signals: Drive process improvements using real-time data.
• Explore new inspection tools and strategies: Aim for earlier problem detection and source identification.
• Innovate with existing tools: Develop techniques to identify relevant process issues.
• Manage image classification models: Enable automated reporting systems.
• Collaborate with the global network to develop best-known methods and maintain alignment between sites.

Requirements:

• Bachelor’s/ Masters in Engineering would be advantageous
• Experience with semiconductor inspection equipment is preferred.
• Data Science and Data Manipulation skills: Ready to learn and apply basic scripting, coding, or programming.
• Preference for metrology or inspection experience: Especially related to data analysis and root cause investigation.
• Capable of international travel up to 3-5 months
• Good communication skills (verbal and written)

Information:

1. Mon to Fri: 8am to 5.45pm
2. Salary range $3200 to $4500

Responsibilities:

• Assist the Project Manager in developing and managing project schedules, budgets and resources.
• Coordinate with architects and contractors to ensure project success.
• Review project plans, specifications, and contracts.
• Ensure compliance with building codes, safety regulations, and environmental requirements.
• Monitor project progress, make adjustment and report status to Project Manager
• Manage project risks and identify opportunities for improvement
• Provide technical support to project team members
• Ensure quality control and quality assurance for all project deliverables
• Attend project meetings and facilitate communication among team members.

Requirements:

• Diploma/Degree in Electrical/Mechatronic Engineering
• At least 1 - 3 years of experience in handling similar projects

Interested applicants, send in your updated resume by clicking “Apply Now”

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

We are seeking a talented and experienced 4G/5G Solution Engineer / Architect to join our team. As a key member, you will play a crucial role in designing, implementing, optimizing cutting-edge mobile networks. Your expertise in IP networking, 4G/5G core network, and cybersecurity will be instrumental to ensure successful project execution.

Job Overview

Key Responsibilities:

• Working with vendors to design end-to-end 4G/5G core network solution, create architectural blueprints, considering scalability, reliability, and security.
• Deploy and integrate telco network components in a virtualized environment.
• Collaborate with vendors/partner to customize solutions and
• troubleshoot issues.
• Experience with network virtualization, NFV (VMware or relevant hypervisor) and cloud native architectures.
• Develop end-to-end solutions for specific use cases (e.g., IoT, industrial automation).

IP Networking:

• Implement routing protocols (BGP, OSPF, MPLS) and ensure efficient data flow.
• Configure and troubleshoot IP routers, switches, and firewalls.

Cybersecurity:

• Assess network vulnerabilities and implement security measures.
• Monitor for threats, conduct risk assessments, and recommend mitigation strategies.
• Collaborate with security teams to ensure compliance with industry standards.

Documentation and Training:

• Create technical documentation, including network diagrams and guidelines.
• Conduct training sessions for internal teams and customers.

Qualifications

• Deep understanding of 3G/4G and 5G standards and telecom call flow/processes.
• 7+ years of experience in designing and deploying mobile network solutions, such as 3G, 4G, and 5G technologies.

Relevant certification is a plus:

• CCNA, CCNP, or equivalent for IP networking.
• 4G/5G vendors/products certifications (e.g., 3GPP, 3G/4G/5G certification).
• CISSP or other cybersecurity certifications.
• Excellent problem-solving skills and ability to work in a fast-paced environment.

Work location: Jurong East

• Possess experience in Linux/Unix and worked in a 24/7 shifting schedule, supporting Tier 1 banks during crucial exchange times.
• Knowledgeable in the FIX protocol and proficient in monitoring tools like ITRS, Zenoss, and Grafana.
• Organize upgrades and maintenance, minimizing disruptions.
• Follow incident handling processes, including initial response, investigation, resolution, and post-incident review.
• Ensure effective communication and coordinated with technical staff, vendors, and stakeholders.

Requirement:

• Minimum Degree in computer Science or related.
• Must have worked in production support enviroment supporting banks for 5+ years.
• 5+ years of exeperiene in Linux/Unix
• Must have worked in a 24/7 rotating shift schedule.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

*Seeking for a Software Developer with minimum 4 years of Software Development skills in Risk Enterprise Applications using Java*

THE COMPANY

Poised with solid growth plans, the company is expanding their foothold in the market. Currently, the company seeks for a Software Developer to be part of their IT team.

JOB RESPONSIBILITIES

• Understand business users’ requirements
• Recommend software solutions to resolve users’ request (Traders and Risk Analysts)
• Create and develop Risk Enterprise applications (Risk reporting, pricing, metrics etc.)
• Participate in other IT projects
• Work closely with other business and internal/external stakeholders e.g. IT vendor/IT team etc.

JOB REQUIREMENTS

• Degree in IT/Information Security/Computer Science or any other relevant education
• Minimum 4 years of Software Development skills in Risk Management/Enterprise Applications (Java)
• Knowledge in the IT skill sets:

o SQL and relational database experience

o Development tools e.g. Gitlab, Docker, JIRA, Prometheus, Kubernetes, Artifactory, Kibana, Junit

o Cloud- Azure or AWS (Hybrid environment)

o Service oriented technologies e.g. JSON, Drop Wizard, Spring Boot, Protobuf. REST

o Web development using modern frameworks- ReactJS

• Independent, highly analytical, proactive and has good communication and interpersonal skills

If you will like to explore this opportunity, please email your resume in Microsoft Word format to [email protected]

We thank you for your interest and will contact shortlisted candidates for more detailed discussion.

For more job openings, please visit our website at https://resolutehunter.com/opportunities/

EA Licence 18C9105

EA Reg R1105305

• Basic Salary: $4,500 to $5,500 Basic + 2 months Variable Bonus

• Possess X-Ray (XRD/XRF) product experience

• Europe MNC

Our client is a Europe MNC & a global leader of instrumentation equipment in the semiconductor & pharmaceutical industry.

Responsibilities

• Responsible for commissioning, installation, maintenance & repair of current installed base of XRD & XRF for APAC.
• Provide Service Support & Basic Training after installation

Requirement:

• Diploma/ Degree in Engineering
• Possess experience in X-Ray (XRD/ XRF) product.

Kindly email your resume in a detailed Word format to

[email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Tel: 6950 9757

We are looking for a highly motivated, ambitious, result driven individual with strong work ethic and integrity to join us as a Photolithography Process Development Engineer/Senior Engineer in NAND Technology Integration (NTI) R&D group. You will be using state of the art equipment to support activities associated with rapid deployment of technology nodes, process margin improvement activities and ensure extended engagement with manufacturing on the upcoming technology nodes.

You are responsible for, but are not limited to, the following:

• Develop and optimize lithography processes to meet yield and quality requirements of advanced Replacement Gate 3D NAND parts
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing photolithography team on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Collaborate with Boise R&D peers on technology adaptation and cost optimization towards upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Identify process simplification opportunities and drive multi-functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Provide advice and counsel to management on significant technical issues. Lead and initiate ground breaking projects through patents/technical papers.
• Communicate and collaborate with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a requirement.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough.

You should possess

• Masters/PhD in Electrical & Electronics, Chemical, Mechanical, Materials Engineering.
• Strong aptitude for research and development and ability to create production-worthy technologies.
• Ability to develop and maintain relations with multi-functional teams and vendors.
• Strong communication skills (written, verbal and presentation).
• Highly motivated and adaptable to demanding, dynamic and rapidly changing work environment; flexibility to work for extended hours, as required.
• Ability to travel to US R&D site for few months to engage in collaborative R&D work.

Possess the above qualities ? Join Us !

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

• Position : Project Coordinator (Civil Engineer/ Underground Train Tunnel/ SMRT)
• Location : Bedok / Woodlands (Bus nearby)
• Working hours : 5.5 day week / 830- 5.30 / Saturday 8.30-/12.30(WORK FORM HOME / REMOTE ONLY)
• Salary (commensurate with experience) : Basic up to $7,200 + Performance Bonus
• Duration : Permanent
• Industry : Architecture / Building and Construction, Engineering

Main Responsibilities:

• To assist in overseeing the entire operation of the company.
• To execute the order and decision of the management committee.
• Coordination with all site personnel to ensure smooth workflow.
• To coordinate and liaise with drafter to propose, amend and submit all related drawings.
• To coordinate and liaise with all projects staff and workers to ensure smooth workflow.
• To attend meetings with clients; prepare all necessary documents/materials submission of the project.
• To submit all Schedules, Procurement, Documents on time.
• To report any work / any incidents to your superior. When problem arises at site, to have initiative to solve or consult your immediate superior for assistance.
• To keep track of site documentation records for easy reference.
• To conduct In-house Toolbox meeting and to ensure all safety issues at site.
• Budgeting and planning in execution of on-going works and tenders.

Requirements:

• Diploma / Degree in Civil Engineering / Architecture or equivalent.
• At least 1-3 years of relevant experience in Construction Industry.
• Preferably able to start work immediately or at short notice.

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Our client specializes in power solutions, ensuring the delivery and maintenance of electrical supply.

• Perform sales and business development for assigned region.
• Create and implement sales and marketing strategies to achieve sales target.
• Liaise with customers and design engineers to specify the products.
• Continuous search business opportunities and expand market share.

Requirements:

• Diploma in Electrical/Electronics Engineering or equivalent.
• At least 4 years of sales experience with good connections in Petrochemical/EPC/Power Plants industry.
• Strong interpersonal, communication and presentation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to[email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996