• Bachelors degree in computer science, Information Technology, or related field.
• 5-8 years of experience in Network Engineering Architecture.
• Professional certifications such as CCNP, CCIE, JNCIP, JNCIE, or equivalent are highly desirable.
• Extensive experience in network engineering, including hands-on experience with high-level troubleshooting and network architecture design.
• In-depth understanding of networking protocols (e.g., BGP, OSPF, EIGRP, MPLS) and network security practices.
• Proficiency with network diagnostic, monitoring, and analysis tools.
• Strong analytical and problem-solving skills.
• Excellent communication and interpersonal skills.
• Ability to work independently as well as part of a team.

EA Number: 11C4879

(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• MIn 3 years QAQC experiences in building projects.
• Detail-oriented and have strong communication skills and able to work with people from all levels.

About the Role

We are seeking a full-stack engineer to join our fast-growing fintech startup. You will work closely with the leadership team to define the product and technology direction, with ample opportunities for growth and flexibility.

You Will...

• Own ideas from inception to execution.
• Work directly with the founders to define the product and engineering roadmap.
• Design and implement backend functionality, architecture, and more. You will work independently, be self-directed, and deliver innovative solutions.
• Pave the way for the company to scale to millions of transactions and power unique digital commerce flows.

Skills We Would Love to See

• Design, develop, and maintain web backend applications using TypeScript, Kotlin, AWS Lambda, microservices frameworks, and PostgreSQL.
• Implement automated continuous integration and deployment (CI/CD) pipelines using tools such as GitHub CI, CircleCI, and AWS CDK for infrastructure as code (IaC).
• Design and implement automated testing using frameworks such as Jest and Playwright.
• Develop and maintain APIs using frameworks like Express and Fastify with OpenAPI specifications for external systems, such as online e-commerce platforms or alternate payment methods.
• Develop and maintain integrations with external systems, including payment network providers, financial institutions, payment gateways, and POS terminals.
• Write clean, maintainable, and efficient code that adheres to best practices and coding standards.
• Participate in code reviews and contribute to improving coding standards and processes.
• Collaborate with cross-functional teams to identify and solve complex technical problems.
• Stay up-to-date with emerging technologies and industry trends, proposing new technologies and tools to improve our products and services.

Nice to Have

• Experience with cloud computing platforms such as Amazon Web Services (AWS) or Microsoft Azure.
• Experience with containerization technologies such as Docker and Kubernetes.
• Experience with microservices and serverless architecture using tools like Docker, Kubernetes, AWS Lambda, and AWS API Gateway.

Minimum Requirements

• Bachelor’s or Master’s degree in Computer Science or a related field.
• 0-5 years of experience in developing software applications.
• A good understanding of software design principles and architectural patterns.
• Effective written and oral communication skills, along with excellent interpersonal skills.

Why Should You Join Us?
Open Fabric is a fintech platform that simplifies digital payments and removes friction in the payment process. We operate primarily in Southeast Asia, working with credit and payment providers to help them expand merchant acceptance. Our goal is to create a seamless and efficient commerce network that offers consumers maximum choice and convenience.

Our team comprises industry veterans with years of experience in the fintech space. We are also backed by leading venture capitalists, enabling us to pursue ambitious goals and push the boundaries of what’s possible in online payments.

We are currently looking for talented individuals to join our team and help us achieve our mission. We offer a dynamic and fast-paced work environment where you'll have the opportunity to work with driven and passionate individuals. If you're excited about the problem we're solving and eager to make an impact, we'd love to hear from you.

How to Apply
Come join us! Email your resume to [email protected].

Our client, a leading company in Singapore, is expanding. They value self-development, career progress and most importantly a healthy working culture. Join them in this exciting journey as a:

Service Engineer

Job description

1. Perform the maintenance service in a proper and correct manner as stated on the checklist

2. Attend emergency breakdown service as instructed by the team leader

3. Carry out testing & commissioning for A&A work and run the small size of project

4. Provide technical support to the Application Team

5. Co-ordinate with the Project and Application departments and provide necessary support when required by the Team Leader

6. Support the systems testing related activities with the Project and Application Teams

7. Liaise with sub-contractor to perform site survey for A&A work and to provide detailed information on equipment quantity and method for the installation to the relevant parties for preparation of quotation

8. Deliver good standard of workmanship and ensure accurate quantity and quality of the equipment to be installed at site

9. Conduct in-house training when is required

10. Perform standby duty and other ad hoc duties as assigned

Key Requirements

• Diploma/ Degree in Mechanical/Electrical/Electronic Engineering
• 2 years’ experience in security systems
• Strong knowledge in network and security systems, able to troubleshoot and rectify the network and systems related issues.

Remuneration:

• $2,500.00 - $3,600.00 per month

Work Arrangements:

• Work Location: In person

Please submit your updated and comprehensive CV to: [email protected] for a P&C discussion. Your CV should be updated and in MS WORD FORMAT ONLY (NOT PDF) with full career details, stating current or last drawn salary with full breakdown such as base, incentives, AWS, etc. and expected salary, contact details, educational qualifications, working experiences, reasons for leaving each past employment(s) and availability date.

For quicker processing, please indicate the position applied for on the subject header. We regret to inform that only shortlisted candidates will be notified. However, if you are not selected, we will explore other positions for you, in the near future. All applications will be treated with the strictest confidence.

What our client offers

Our client offers an attractive remuneration package, a fast-paced and exciting working environment and provides challenging opportunities for career advancement. They care about their employees. They are not just an employer. They are a Team. They do not just offer you a job, they offer you a career. By joining their team, you will find a strong purpose and deep meaning in everything you do. You will have the chance to make a real difference for customers, working alongside a passionate team of like-minded colleagues, while building your knowledge/skills and developing your career in a fun, dynamic and fast-growing organization.

Our client advocates fair employment practices, recruits talents based on merit and fit with their corporate values and complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. They are committed to achieving diversity and creating an inclusive working environment. They welcome all applications irrespective of social and cultural background, race, gender, age, religious belief or nationality.

Personal Data Protection Statement for Job Applicants

Please be informed that the personal data you provided by way of your job application to Grace HR Solutions will be collected, used and disclosed by or on behalf of Grace HR Solutions to determine or investigate your suitability, eligibility or qualifications for employment with Grace HR Solutions and/or its clients and manage your application for employment with Grace HR Solutions and/or its clients including identifying you as potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Thank You!

ANDY LUCAS | CEI No: R24123824 |

Grace HR Solutions | EA Licence No: 22C1305 |

UEN: 53456396A

Company Overview

Grace HR Solutions is a boutique professional recruitment consultancy involved in the recruitment of permanent, contract, and temporary positions. We are fully committed to achieving excellence in every assignment through leveraging our vast candidate pool, industry connections, and strategic insights. As the total recruitment and staffing solutions partner, our goal is to provide our Clients the best staffing solutions through an integrated database network supported by localized content and services. We strive to be efficient and effective in matching the right candidate to the right job. Reach out to us to discover even more about how we can help you with all your staffing needs or your own career

Job Type: Full-time

Pay: $2,500.00 - $3,600.00 per month

Schedule:

• Monday to Friday

Location:

• Singapore (Preferred)

Work Location: In person

This position is responsible for the efficient operation, maintenance and repair of the physical structure, utility services, equipment, fixtures, and furnishings of the hotel facilities.

• Work with supervisor or technicians to carry out planned preventive maintenance, corrective maintenance and repairs as per instructed by Engineer
• Responsible of all technicians under Duty Engineer care
• Carry out planned and unplanned maintenance programs for the various systems such as (not limited to) the following:
• Air-conditioning & electrical, refrigeration, FLS equipment, building maintenance including furniture & fixtures, parts renewal & repairs, kitchen equipment, low voltage (LV), guest rooms, F&B outlets, front/back of the house, plumbing & drainage.
• Comply with established safety practices while performing repair or retrofit of all electrical, mechanical, plumbing, HVAC, water treatment, etc. Operate, maintain and repairs all hotel systems, devices, controls, equipment, etc.
• Comply with all established procedures, e.g. Work Orders, Out-of-Order Rooms, Emergencies, etc.
• Carry out preventive maintenance, repair or retrofit of electrical, mechanical plumbing, fire protection, and life safety systems.
• Records and analyses daily operating logs and utilities.
• Handles emergencies in repair works.
• Carry out improvement, maintenance and repair work on all building services and equipment according to the standards and requirements.
• Perform daily startup, shutdown and inspection of building services and equipment according to the standards and requirements.
• Maintain tools and equipment, and perform Engineering housekeeping work.
• Be fully familiar of the Emergency Procedures, Policies and Standard Operating Procedures as established by the Hotel.
• Attend all briefings, meetings and trainings as assigned by management.
• Perform other duties as directed by the management.
• Ability to prioritize tasks and follow specified procedures
• Ability to work well with minimal supervision
• Resolve problem without waiting for ‘Spoon feeding’ idea.
• Good physical condition, strength and well
• Enforce and check general housekeeping and tidiness of workplace and workspace
• Respond quickly in the event of an emergency, notify appropriate personnel and follow safety protocol
• Basic understanding of mechanical and electrical system
• Ability to conduct basic troubleshoot, test, repair and service equipment
• Fast, efficient and accurate when escalating problem up to Engineers
• Willingness to work overtime if necessary
• Able to make judgement and decision when Engineer is not around
• Assist Engineer to follow up outstanding issue passed down

Qualifications / Experience

• Trade Certificate or a minimum of 2 year of relevant hands-on experience in area of expertise
• Reading, writing and oral proficiency in English language
• Good communication and customer contact skills
• Service oriented with an eye for details
• Ability to work effectively and contribute in a team
• Self-motivated and energetic
• Able to lead the team in absence of supervisor
• Required to come down on site is urgent issue arise
• Control of technician’s OT and work roster
• Required simple computer knowledge etc, word and excel

About the Company

Our Client is an information technology service provider offering consulting, systems integration, maintenance and managed services to enterprise customers

Responsibilities

We are looking for a Network Engineer to design, deploy and maintain network infrastructure and solutions for clients in various industries.

• Design and implement secure networking solutions;
• Install, configure, and manage network devices;
• Troubleshoot escalated network issues and work towards effective resolution;
• Maintain detailed technical documentation for all network-related configurations and procedures;
• Monitor and enhance network performance, ensuring high levels of availability and stability;
• Drive improvements in scalability, capacity, security, and overall system efficiency;
• Support project deployment, ensuring successful implementation of network solutions.

Requirements

• Tertiary education in information technology or any relevant discipline;
• Certification in networking technologies would be an advantage;
• At least 3 years of experience in network infrastructure, ideally within a systems integration environment;
• Strong knowledge of wired and wireless network deployment and related technologies;
• Familiarity with routing and switching protocols and practices;
• Excellent organizational skills and the ability to prioritize tasks effectively.

Employment Details

• This is a 1-year renewable contract, convertible to permanent.

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

Job Description:

• Manage the project site by overseeing the day-to-day running of all matters related to the construction of the project as designated by the Project Manager.
• Plan, implement and monitor the work schedules according to the master and detailed work programmes.
• Assist in the planning and sequencing of the construction operations according to the Project Quality Plan.
• Liaise with client's representatives on site and with all subcontractors.
• Conduct inspections and checks on work performed by all subcontractors.
• Assist in the evaluation and resolution of any discrepancies and problems arising during construction and which has an effect on quality of the works.
• Ensure that updated drawings including shop drawings are used by for all construction.
• Co-ordinate the handing over of completed works to the client and completion of the necessary rectification works.
• Prepare project-related reports as required by the Project Manager or Construction Manager.

Job Requirement:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.
• PE Board Recognised Degree
• At least 5 Year(s) of working experience in the related field is required for this position.

Job Description & Requirements

The Corporate Quality Environmental Safety and Health Officer

• Inspect projects and provide advisory role to project team to eliminate potential hazards.

• Advise on risks arising from the workplace or processes at work, suggests measures to stop or tightly control all risks from happening.

• Preventing or lowering health and environmental risks, and improving quality of processes.

• Assisting the Company with ISO Certification involving ISO 9001, ISO 14001 & ISO 45001.

• Assisting projects with Consass Audit every 6 month.

• Conducting Internal Audit to projects to ensure compliance to ISO 9001, ISO 14001 & ISO 45001.

• Conducting Internal GGBS audit & maintaining Company’s GGBS certification

• Maintaining & revising IMS manual, Procedures & Safety, Health, Environment Management System Manual (SHEMS)

• Developing and revising Risk Assessment and Safe work procedures.

• Applying & maintaining BizSafe status of the Company

• Applying for WSH Awards from WSH Council

• Conduct QESH training to projects

• To attend to Client’s and Authority’s (MOM) inspection

• To organize programs related to Total WSH program by WSH Council

• To assist in providing safety related documents for Tender submission.

• Collating monthly safety performance statistics from all projects

• Conduct Monthly QESH meeting to all projects to share the safety performance of all the projects for continual improvement & to include evidences in the yearly MR Meeting.

Roles & Responsibilities

Job Scope:

• Submit plan and execute well-defined sales strategies to achieve targets;
• Develop and maintain good rapport with existing customers;
• Promptly and professionally attend to customers’ enquiries and requests and provide technical advise on both existing and new products or systems;
• Supports sales opportunities through presentations, calling and visiting customers and prospects, needs identification with active follow-ups;
• Ensuring smooth service operation efficiency for customers with sales and operations team
• Investigating and resolving customers’ issues with relevant departments when necessary
• Acquire new customer accounts;
• Assist in preparation of proposals and quotation administration;
• Contribute creative alternative ideas to help maximize sales opportunities;
• Participate in marketing, advertising, promotional and publicity activities in line with corporate and product strategies;
• Gather information on market demand, competition and latest product developments
• Conduct periodic sales forecasts;
• Prepare weekly sales/contact reports.

Requirements:

• Diploma/Degree in Mechanical/Civil Engineering other Engineering related
• 3 to 5 years of Experience
• Possess Class 3 driving license (with own transport preferred)
• Excellent communication, interpersonal and presentation skills;
• Possess an outgoing personality;
• Resourceful, proactive self-starter, positive attitude, performance oriented, able to work independently but also a team player;
• Must be able to read and write fluently in English & Mandarin
• Able to speak Mandarin p

Job Description:

• Perform preventive maintenance of production equipment.
• To report in writing for maintenance carry out.
• Provide support for network, security, server, UPS and mission critical systems.
• Perform other job responsibilities as and when assigned.

Requirements:

• Minimally 1-2 years of experience in supporting network, security, server, UPS and mission critical systems with a stringent SLA of 99.9%.
• Customer orientated with high level of service attitude.
• Good listening and analytical skills.
• Hardworking, outgoing and enthusiastic.
• Positive working attitude.
• Team player and also able to work independently with little supervision.
• Able to thrive in a dynamic environment.
• Able to understand the system and architecture diagrams.
• Able to understand the user operation environment.
• Willingness to pick up new technologies.
• Flexible to work in rotational shifts.

Interested candidates, do send your resume to [email protected]. ONLY shortlisted candidates will be notified through email for an interview.

Job Highlights

• Career Development Opportunities
• Duty Meals, Birthday Leave and Flexible benefits
• Complimentary Room Nights
• Discounted Room and Dining Rates

We are looking for Duty Engineer to join our Fun and Vibrant team.

As a Duty Engineer, we rely on you to

• Provide advice on the aspects of maintenance support and operational efficiency
• Supervises the team members and contractors’ for maintenance and repair of equipment
• Manage daily report of complains and maintenance request, to provide analyses report on regular basis
• Assist in implementing the Energy Conservation Programme
• Conduct on the job training to team members.
• Coordinates engineering support as required in hotel emergency procedures
• Adhoc duties as assigned.

We are looking for someone who:

• Diploma / Higher NITEC / NITEC in Electrical / Mechanical / Building Services / Facilities Technology
• Preferred working experience in hospitality industry
• Team player
• Good communication and writing skills

If you are the right person, what are you waiting for? Click the APPLY button now!

Dependable Solutions Partner Pte Ltd

· We are a well-established growing company, ready for the next phase of expansion.

· We offer a work culture where everyone wins as a team, through trust, support and respect.

Responsibilities

• Responsible for the overall, coordination, implementation and execution of projects ensuring consistency with company commitments and goals

• Good organisation and time management skill, able to work independently with minimum supervision

• Perform project co-ordination works between client, suppliers and sub-contractor pre and post project implementation

• Monitor and report the progress of the projects to all stakeholders

• Able to work under tight deadlines

Assistant Project Engineer/Project Engineer (M&E)

Visit https://ourengineers.com to apply or submit your CV for more job opportunities.

Responsibilities:

· Maintains project team accomplishments by communicating essential information; coordinating actions; obtaining expert input; reviewing open issues and action items; contributing information to team meetings and reports; escalating project completion impediments.

· Day-to-day management on site, including supervising and monitoring the site and co-ordinate sub-contract works.

· Liaise with clients and consultants on project.

· Produce proper reports and documentation before and after project completion.

· Complies with codes and regulations by complying with requirements; preparing permit applications, plans, and compliance reports.

· Assist to update of As-Built drawing on site.

· And all other General Administration works as instructed.

Requirements:

· Minimum Diploma or equivalent.

· Min 2 years working experience in M&E at Interior Design Fit up(Electrical / ACMV / Plumbing / Fire Protection)

· Able to work independently and possess good interpersonal skills.

· Able to start work immediately or within short notice

Visit https://ourengineers.com to apply or submit your CV for more job opportunities.

Responsibilities

• Coordinate with internal team in Singapore / India & liaise with customers / consultants on day to day basis
• Preparation of project documents including BQ
• Handling Design & Build projects
• Prepare optimised design solutions for projects
• Prepare Design drawings (Single Line Drawings & layout)
• Prepare design calculations incl voltage drop, short circuit current etc.
• Support multiple M&E projects concurrently
• Lead project meetings and work with team members to achieve the deliverables on-time
• Ensure drawings & documents are well maintained & stored in a timely manner
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Electrical Engineering
• Minimum 5 yrs of relevant hands-on M&E experience in construction industry and LTA projects
• Need to be familiar with Singapore codes such as SS638 (CP5), SS650, SS555 etc
• Hands-on experience in AutoCAD drawings is preferred
• Familiarity in BIM (Revit / Navisworks) is advantageous
• Having consultancy experience is preferred
• Possess effective organizational and follow-up skills, meticulous
• Good communication skills
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Job Responsibilities & Duties

• Create and maintain automated test cases, test plans and test framework ensuring that they are up to date with requirements and policy changes
• Create, maintain and improve the automated test framework and test environments
• Conduct testing on new features and file defects
• Perform various tests such as manual/functional/performance/exploratory tests and support UATs
• Assist in resolving production cases

Experience required:

• At least 2 years of professional software quality testing experience with hands-on automation
• Strong understanding of testing techniques, risk analysis
• Strong understanding of test-driven development, continuous integration and continuous delivery
• Proficiency in programming languages such as Java or Kotlin. Knowledge of Spring Boot will be an advantage
• Experience with open-source automated testing frameworks such as Cucumber, TestNg and Playwright
• Experience with open-source performance testing tools such as JMeter, Gatling, Locust or enterprise level tools such as HP LoadRunner

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Job Description:

• Provide presales and post-sales support on the technical queries by customers on the automation product.
• Provide technical support to customers via phone call or in person to provide solutions for them.
• Responding to their needs and make the best recommendation for them.
• Work closely with sales team to ensure they are equipped with up-to-date technical information.
• Provide product training and conduct product demonstration to customers.
• Perform needed evaluation and assessment on customers’ workpieces to ensure it is fulfilled as per their requirements.

Job Requirement:

• Good interpersonal and communication skill
• Welcoming fresh entry level with electrical/electronic or mechatronics background
• Knowledge in PLC, Control/Automation, IOT Knowledge will be added advantage
• Willingness to learn and with positive attitude

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Executive Summary

Smart IMS Inc provides Digital technology & Cloud transformation services, Application & Infrastructure Management Services, Unified Communications and Insurance implementation services to customers across the Americas, Europe, Middle East, and Asia-Pacific regions. As the trusted technology and business partner of leading MNCs, including Global Investment Banks, Smart IMS is also a Microsoft Gold Certified Partner, Oracle Platinum Partner and AWS MSP Partner.

We are seeking a highly motivated and detail-oriented Capacity Planning/Automation Engineer to support our client’s Data Center team. This role will focus on ensuring the availability of sufficient materials for Hosting and Network Services, as well as developing automation solutions to streamline reporting processes. The ideal candidate will have a strong background in capacity planning, data analysis, and automation development.

Key Responsibilities:

Capacity Planning:

• Collaborate with vendors to forecast and ensure adequate supply of materials to support Hosting and Network Services operations.
• Monitor inventory levels, assess future needs, and mitigate risks of material shortages.
• Provide data-driven insights to improve forecasting accuracy and efficiency.

Automation Development:

• Design and implement automated solutions to enhance reporting efficiency and accuracy.
• Develop and maintain tools for generating critical reports, such as:
• Work Queue Status Reports
• Capacity Reports
• Identify opportunities to optimize manual workflows through automation and propose actionable solutions.

Reporting and Analytics:

• Generate regular and ad hoc reports to support operational decision-making.
• Analyze trends and metrics to improve operational performance and capacity planning processes.

Collaboration:

• Work closely with the Hiring Manager and cross-functional teams to align capacity planning with business goals.
• Partner with vendors, Hosting, and Network Services teams to ensure seamless operations and proactive planning.

Qualifications:

• At least 1-2 years of proven experience in capacity planning, inventory management, or a similar role.
• Experience and knowledge with IT infrastructure and data center operations
• Experience in automation / scripting (e.g., Python, PowerShell, VBA, or other tools).
• Proficiency in data analysis tools and reporting platforms will be a plus.
• Excellent analytical, problem-solving, and communication skills.
• Ability to manage multiple priorities in a fast-paced environment.

• Develop automation scripts using PowerShell and Automation Anywhere to optimize repetitive tasks and improve system efficiency.

• Manage and maintain Windows servers (2008/2012/2016/2019/2022).

• Configure and troubleshoot core services, including Active Directory, DHCP, DNS, Group Policy, and Failover Clustering.

• Deploy and manage virtualized environments using VMware (vSphere, vCenter, ESXi) and HyperV (SCVMM 2016/2019).

• Administer and support Citrix LTSR 7.15 XenApp and XenDesktop environments, ensuring seamless application delivery and desktop virtualization.

• Oversee the configuration and management of HP and Cisco blade servers, ensuring optimal hardware performance and resource utilization.

• Manage OS patching for Windows and VMware environments using tools such as SCCM, HPSA, and BigFix.

• Ensure compliance with security standards and minimize system vulnerabilities.

Qualifications

• Bachelor's degree in Computer Science, Information Technology, or a related field. Equivalent experience may be considered.

• 5+ years of experience in Windows Server administration and infrastructure management.

• Hands-on experience with VMware, HyperV, and Citrix technologies.

• Proven track record in developing automation scripts and managing patching processes.

• Strong knowledge of Windows server architecture and core services.

• Proficiency in PowerShell scripting and Automation Anywhere tools.

• Expertise in virtualization and blade server management.

• Solid understanding of patch management methodologies and tools.

o Certifications (preferred):

o VMware Certified Professional (VCP).

o Citrix Certified Associate (CCA).

o Microsoft Certified: Windows Server Hybrid Administrator Associate.

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

We are seeking a skilled and motivated Middleware Engineer to design, implement, and maintain middleware solutions that enable seamless integration between applications, services, and systems. The ideal candidate will have a deep understanding of middleware technologies, system architectures, and enterprise integration patterns. You will collaborate with cross-functional teams to ensure the performance, reliability, and scalability of middleware platforms.

Key Responsibilities:

1. Middleware Design & Implementation:Design and deploy middleware solutions to support enterprise application integration.
   Install, configure, and manage middleware technologies, such as WebLogic, WebSphere, Apache Kafka, or Oracle Fusion Middleware.
   
2. Integration & Automation:Develop and implement integration solutions using APIs, messaging, or event-driven architecture.
   Automate middleware deployment, monitoring, and maintenance using scripting or orchestration tools.
   
3. Monitoring & Troubleshooting:Monitor middleware performance and ensure high availability and reliability.
   Diagnose and resolve middleware-related issues in a timely manner.
   Conduct root cause analysis and implement preventive measures.
   
4. Security & Compliance:Ensure middleware solutions are secure and compliant with organizational policies and standards.
   Apply patches, updates, and security configurations to middleware components.
   
5. Collaboration & Support:Work closely with application developers, system administrators, and DevOps teams to align middleware solutions with business needs.
   Provide technical support and training for middleware technologies.
   
6. Documentation:Maintain accurate and comprehensive documentation for middleware configurations, processes, and standards.
   

Required Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Proven experience as a Middleware Engineer or in a similar role.
• Hands-on experience with middleware technologies (e.g., IBM WebSphere, Apache Kafka, Oracle WebLogic, or similar).
• Strong knowledge of enterprise integration patterns, API management, and service-oriented architecture (SOA).
• Proficiency in scripting languages (e.g., Python, Bash, or PowerShell).
• Familiarity with cloud platforms (e.g., AWS, Azure, Google Cloud) and containerization technologies (e.g., Docker, Kubernetes).
• Excellent troubleshooting and problem-solving skills.

Preferred Qualifications:

• Certifications in relevant middleware or cloud platforms (e.g., AWS Certified Solutions Architect, Oracle Middleware Certification).
• Experience with CI/CD tools (e.g., Jenkins, GitLab CI/CD).
• Knowledge of database systems and SQL.

Key Competencies:

• Strong communication and interpersonal skills.
• Ability to work independently and collaboratively in a team environment.
• High attention to detail and commitment to delivering quality solutions.

1. JOB DESCRIPTION

Job Title

Sales Engineer

Occupation

Sales & Marketing Engineer

Job Description & Requirements

Job Description:

We are seeking a highly motivated and skilled Mechanical Sales Engineer to join our team. As a Mechanical Sales Engineer, you will be responsible for driving sales and promoting our mechanical products and solutions to customers in Singapore. Your primary focus will be on developing new business opportunities, managing customer relationships, and achieving sales targets.

Responsibilities:

1. Develop and implement effective sales strategies to promote mechanical products and solutions.
2. Identify and target potential customers, including conducting market analysis and research.
3. Build and maintain strong relationships with existing and new customers, ensuring customer satisfaction.
4. Collaborate with the engineering team to provide technical support and product knowledge to customers.
5. Prepare and deliver professional sales presentations and demonstrations to potential clients.
6. Negotiate and close sales deals, ensuring profitable business growth.
7. Monitor market trends and competitor activities to identify new business opportunities.
8. Collaborate with the business development team to develop and execute sales plans.
9. Provide regular sales reports and updates to management.

Requirements:

1. Diploma in Mechanical Engineering or related field.
2. Proven experience in technical sales, preferably in the mechanical industry.
3. Strong customer relationship management (CRM) skills.
4. Excellent negotiation and communication skills.
5. Ability to analyze market trends and identify business opportunities.
6. Knowledge of mechanical engineering principles and products.
7. Demonstrated ability to achieve sales targets and drive business growth.
8. Proficient in presentation skills and delivering persuasive sales pitches.
9. Self-motivated and able to work independently as well as in a team.
10. Singaporean citizenship or valid work permit.

If you are a dynamic and ambitious individual with a passion for sales and mechanical engineering, we invite you to apply for this exciting opportunity. Please submit your resume, along with a cover letter highlighting your relevant experience and achievements.

Main Duties:

• Oversee the construction activities and progress, plan, implement and monitor work
• Schedule in accordance to the master and detailed work program
• Liaise with Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle of technical and engineering problems
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule,
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep site safer and neat
• Supervise ongoing site activities closely

Summary

Responsible for designing and implementing test hardware and software to validate product functionality, performance, and reliability. Strong problem-solving, organizational, and communication skills are crucial for success in this role.

Responsibilities

• Design, develop, and implement test hardware and software for validating product functionality, performance, and reliability.
• Create automated test systems and procedures to ensure consistent and repeatable test results.
• Develop, troubleshoot, and maintain test fixtures, equipment, and associated software for in-house and production testing.
• Collaborate with design and manufacturing teams to identify and address test-related issues.
• Analyze test data to identify trends, troubleshoot issues, and recommend improvements to product design or test processes.
• Document test plans, procedures, results, and maintenance requirements.
• Ensure test systems comply with industry standards and safety regulations.
• Continuously improve test processes and tools to reduce testing time and increase reliability.

Requirements

• Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field from a recognized institution.
• Minimum of 5 years of experience in developing test hardware and software, preferably for complex electromechanical systems.
• Strong proficiency in programming languages such as Python, LabVIEW, MATLAB, or C/C++.
• Knowledge of hardware design and schematic interpretation to develop custom test fixtures.
• Experience with data acquisition systems, signal processing, and instrumentation.
• Familiarity with communication protocols (e.g., I2C, SPI, UART, Ethernet) and interfaces (e.g., GPIB, USB).
• Ability to integrate sensors, actuators, and control systems into test setups.
• Experience in using software tools for simulation, debugging, and automation.
• Ability to analyze complex technical problems and develop innovative solutions.
• Strong troubleshooting skills for both hardware and software in testing environments.

Role & Responsibility:

• Set design requirements based on information from internal teams and user research.
• Identify new product improvement opportunities.
• Analyze how a new product satisfies business needs and user preferences.
• Modify and revise existing designs to meet changing customer preferences.
• Work closely with product engineers to suggest improvements for products and processes.
• Present product design ideas to cross-functional teams
• Help development teams create components by ensuring its built according to design and interaction specifications.
• Maintain the design system, create, and update documentation, and library components.
• Establish design standards and principles accompanying the design system for scalability, efficiency, and consistency.

Skillset Requirements

• Proven experience in all phases of the design process including user research, copywriting, wireframing, prototyping, visual design, interaction design, and usability testing.
• Proficiency and mastery of standard design tools (Figma, Sketch, Adobe CS and XD).
• Demonstrable experience in building design systems, component libraries, and/or UI Kits.
• An intuitive eye for customer needs beyond the obvious.
• Excellent attention to detail.
• Ability to collaborate with cross-functional team members.
• Ability to collect and interpret both qualitative and quantitative feedback.
• A well-rounded portfolio of client work, demonstrating a strong understanding of client objectives.
• Ability to effectively communicate and persuade around design concepts.
• Passion for design, not satisfied with the status quo and always thinking of ways to improve.
• Creative problem-solving skills.
• Dynamic, creative personality, effective at engaging and influencing a variety of audiences.
• Provide assistance to product engineers when needed.
• Recommend new tools and technologies by staying abreast of the latest trends and techniques.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Roles & Responsibilities

• Site & office project management and daily operations including inspections, handover, site measurements, project management.
• Handling technical and engineering issues.
• Overall project planning, scheduling, monitoring and updating to meet project completion targets.
• Liaison and meeting with client's representatives, relevant authorities and consultants.
• Site co-ordination, monitoring and report work progress.
• Responsible for timely submission of reports and completion of projects including tender/submission with target dates
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of projects
• Conduct site check on the repair works in building structures, in accordance with approved methods and procedures proposed by the Qualified Person, specifications and instructions.

Requirement:

• Degree or Diploma in Civil/ Structural Engineering or equivalent
• Incumbent with working experience on Singapore LTA / Rail project preferred
• Possessing 2 years of working experience in the related field will be advantageous.

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Design and build data pipelines infrastructure to collect, process and store data from various sources.
• Develop data assets platform to provide a centralized repository for managing and accessing data assets.
• Implement automated SQL queries based on user-defined criteria or business requirements.
• Use techniques like query templates, metadata-driven generation, or machine learning algorithms to generate SQL queries.
• Create new IPs in Singapore in area of expertise.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development.

Requirements:

• Degree / Masters / PhD in Computer Science, Data Science, Statistics Applied Sciences or related field.
• Proficiency in Python, SQL, Java or Scala programming languages.
• Understand data warehousing concepts, ETL (Extract, Transform, Load) processes and tools like Informatica, Talend, or Airflow.
• Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra).
• Familiar with Apache Airflow, Kubernetes or Ansible for automating data pipelines and infrastructure.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215