Able to design the electrical system in the construction projects.

Must ensure compliance in the electrical systems.

Able to do coordinate installation.

Able to do maintenance and test activities.

Able to solve the issues in the electrical projects in the construction projects.

Able to lead the team of workers and site supervisors.

Working Hours: 7am-7pm; 7pm-7am

Roles & Responsibilities

Assist in the installation, operation, trouble-shooting, maintenance and repair activities of factory and office machineries and equipment, with an emphasis on automation machineries and robotic systems.

Specific Duties & Responsibilities:

• Support Principal Automation Engineer/Automation Engineer in providing technical support in computerized automation/robotic systems.
• Perform machineries and equipment installation, set-up, servicing, maintenance and repair job (both corrective and preventive), and ensure automation/robotic systems to remain in a validated and functional state at all times, including setting up or calibration check.
• Ensure that automation equipment are well maintained in good working condition to support production or engineering runs with minimum downtime.
• Ensure timely diagnosis, trouble-shooting and resolution of identified automation/robotic system issues (both hardware and software).
• Perform routine checks to monitor equipment operating parameters, prompt updating onto monitoring system to ensure operations are within control specifications, including setting up or calibration check.
• Prepare trouble report and be involved in work improvement projects.
• Perform any other duties as assigned by superior and/or management.

Job Specification:

• NTC 3/Diploma in Mechanical/Electrical/Mechatronics or equivalent.
• Understanding of electrical/mechanical/pneumatic schematics • Fundamentals in robot teaching
• Basic knowledge in PLC, HMI, and control system.
• Sensors selection and maintenance
• Minimum 3 years’ experience in process control/automation/robotic system solution in a manufacturing or related field.
• Knowledge Required: • Working knowledge in metal stamping industry is preferred. • Possess safety awareness in handling machine as well as basic safety knowledge in factory.
• Skills Required: Good trouble shooting skills • Hands on skills in mechanical, electrical & pneumatic matters • Good planning, supervisory, interpersonal and analytical skills • Ability to communicate technical/ complex information both verbally and in writing. • Perform multiple tasks concurrently and respond to emergency situations effectively
• Attributes Required : Able to handle physical work, reliable, honest, initiative, independent and good team player

Compensation & Benefits

• Annual Increment
• Performance Incentive Bonus
• Career Progression

For quick reply, please contact me at +65 85878287

Registration Number: R21100938 (Tan Jie Bei)

EA Licence No: 22C1301 (Unisearch Services Pte Ltd)

• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and coworkers about analysis results

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As an Engineer under Engineering- Manufacturing System and Automation, you will be tasked to provide operational technical support to drive productivity and product quality with GxP compliance and regulatory requirements. You will also assist to drive/ execute control and automation projects and provide maintenance, backup and restore for IPC and PLCs. You will also carry out / support investigation for non-conformances.

In this role, a typical day will include:

· 1st level engineering support for major equipment downtime [24x7 supports]

· Focus on solving recurring/ long-term equipment issues through detailed understanding of the design or engineering concepts.

· Maintain and perform routine check and backup/restore for Industrial PCs/ PLCs.

· Lead and support automation/control related projects. Develop/review project documentations and related SOPs. Perform equipment/software validation.

· Prepare training materials on respective process/ system/ equipment in term of operation, maintenance or troubleshooting.

· Innovate, provide and implement ideas for process or equipment improvement.

· Ensure the system/equipment are comply with HSE, and Alcon quality requirement

WHAT YOU’LL BRING TO ALCON:

· Minimum 0-3 years of intensive hands on experiences in technical (Electrical/ Mechatronic /Electronic/Physics/ Automation) troubleshooting and experience on Siemens S7/TIA Portal, Beckhoff TwinCAT and/or Allen Bradley PLC.

· Experience on factory automation system installation/validation and understanding of GMP/GDP requirement.

HOW YOU CAN THRIVE AT ALCON:

· Good team player

· Enjoy working with various cross functional team across manufacturing site

Alcon Careers

See your impact at alcon.com/careers

Job Description & Requirements

- Job title will be Project Engineer and the duties are providing technical advice, supervising staff on site and ensuring that their packages are completed on time and within budget.

- Managing the Project

- Monitoring the workers

- Work at any construction site

- Prepare the progress report

- Report to the director

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Planning, co-ordination and execution of LTA and SMRT projects

To attend all interface and co-ordination meetings with different stakeholders and contractors

Installation, monitoring, supervision, testing and troubleshooting of RTU at site

Preparation of project documents and drawings

Requirements:

Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Under administrative supervision of the Technology, this position is responsible for the deployment and maintenance of a cloud-based applications infrastructure.

Responsible for deploying, automating, maintaining, troubleshooting and improving the systems that keep the backend infrastructure running smoothly. The role requires you to have hands-on technical experience and a can-do approach towards environment automation / management and continuous improvement.

Job Duties:

• Deploying, automating, maintaining, and managing AWS cloud-based production system, to ensure the availability, performance, scalability and security of productions systems.
• Build, release, and configuration management of production systems.
• Pre-production Acceptance Testing to help assure the quality of our products / services.
• System troubleshooting and problem solving across platform and application domains.
• Suggesting architecture improvements, recommending process improvements.
• Ensuring critical system security using best in class cloud security solutions.
• Evaluate new technology options and vendor products.

Skills and Requirements:

• Bachelor’s degree in computer science or other equivalent technical discipline.
• 1+ years’ experience with using a broad range of AWS technologies (e.g., EC2, RDS, ELB, EBD, S3, VPC, Glacier, IAM, CloudWatch, KMS) to develop and maintain an Amazon AWS based cloud solution, with an emphasis on best practice cloud security
• AWS Certified Solution Architect (Associate) is preferred.
• Conversant with infrastructure definition tools such as Cloud Formation and Terraform
• Experience as a DevOps Engineer in a 24x7 uptime Amazon AWS environment, including automation experience with configuration management tools.
• Scripting Skills: Strong scripting and automation skills.
• Operating Systems: Windows and Linux system administration.
• Monitoring Tools: Experience with system monitoring tools.
• Problem Solving: Ability to analyze and resolve complex infrastructure resource and application deployment issues.
• Experience with other Clouds such as Azure or GCP can be considered.

Note: Proceeding to apply on this job post means you have read, understand and agreed to WPH DATA PROTECTION NOTICE FOR JOB APPLICANTS in the link below.

https://www.wphdigital.com/notices

Job Purpose

To take charge as process/product owner role for processes transferred from MF or customers. To deliver KPIs right from process setup, qualification, tapeout, prototype to mass production phase.

Job Description

• To meet key process/product qual milestones set e.g. Tapeouts (NTO/RTO), PRS matching, ERA, WAT/yield matching, HTOL/ESD/Latchup etc
• Co-work with transfer team and Fab modules to deliver robust integrated process to enable a successful production volume ramp from development/pilot stage.
• Key Fab interface role working directly with customers to address their needs, product performance in terms WAT/yield, conference calls and customer audits etc
• Own process FMEA, PCP for processes under your ownership.
• Own SPC and CITs with modules/QA on inline and WAT Cp/Cpk/OOC performances to meet Fab and customer’s index.
• Manage daily ops related logistics in terms of inline/WAT disposition with related parties to enable smooth wafer shipment.
• To co-work with product engineer to perform device/process corner splits to check out product yield window.

Job Requirements

• Bachelor’s Degree preferably in Engineering with semiconductor process or device knowledge
• A minimum of 3-5 years of relevant experience in technology development, product transfer or process integration related scope.
• Good presentation and communication skills
• Independent and adaptable to different culture fast
• Hardworking, adaptable and able to work independently and collaboratively with teams
• Ability to thrive and meet timelines in a fast-paced and dynamic result-driven environment

Job Purpose

To take charge as process/product owner role for processes transferred from MF or customers. To deliver KPIs right from process setup, qualification, tapeout, prototype to mass production phase.

Job Description

• To meet key process/product qual milestones set e.g. Tapeouts (NTO/RTO), PRS matching, ERA, WAT/yield matching, HTOL/ESD/Latchup etc
• Co-work with transfer team and Fab modules to deliver robust integrated process to enable a successful production volume ramp from development/pilot stage.
• Key Fab interface role working directly with customers to address their needs, product performance in terms WAT/yield, conference calls and customer audits etc
• Own process FMEA, PCP for processes under your ownership.
• Own SPC and CITs with modules/QA on inline and WAT Cp/Cpk/OOC performances to meet Fab and customer’s index.
• Manage daily ops related logistics in terms of inline/WAT disposition with related parties to enable smooth wafer shipment.
• To co-work with product engineer to perform device/process corner splits to check out product yield window.

Job Requirements

• Bachelor’s Degree preferably in Engineering with semiconductor process or device knowledge
• A minimum of 3 years of relevant experience in technology development, product transfer or process integration related scope. Fresh grads can be explored with relevant semiconductor device knowledge.
• Good presentation and communication skills
• Independent and adaptable to different culture fast
• Hardworking, adaptable and able to work independently and collaboratively with teams
• Ability to thrive and meet timelines in a fast-paced and dynamic result-driven environment

Responsibilities

• To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples
• To liaise and work with relevant authorities, sub-contractors, main contractor or clients on shop drawings, materials and samples
• Review and align ACMV design drawings to ensure compliance with design specifications and guidelines
• Knowledge in M&E and able to identify discrepancies between M&E, structural, ID, architectural and client provisions
• Manage and execute project as per the deadline
• Attend meeting with subcontractors / contractors / clients to address issues and update progress
• Study and review drawings, specifications for compliance
• Allocate work and ensure jobs are correctly and properly achieved within standards and SOP.

Requirements:

• Diploma / Degree in Mechanical Engineering
• Candidate with more than 10 years of relevant experience will be considered for Senior position
• Preferably candidate with relevant working experience in the Construction Industry especially in ACMV system installation
• Sound knowledge in ACMV System, Local / International Code of Practice / Standard, Green Mark Requirement, Hydronic / Static Calculation, BIM, Revit, Autocad would be an advantage
• Good working attitude and a team player
• Proficient in Microsoft Office

Job Description

• Supervise and coordinate the activities of site contractors;
• Monitor job progress and ensure that civil contracted works meets all practical, commercial, requirements of productivity, quality and contract target completions;
• Ensure all Structural work is carried out within established budgets and schedules;
• Ensure all design work conforms to the codes and standards used by the client, or to agreed industry standards.
• Implement and oversee site projects assigned to ensure smooth project execution
• Manage internal and external contractors well to ensure quality of work and scope of work is within specifications.

Requirements

• Degree in Civil/Structural Engineering recognised by the Professional Engineers Board Singapore
• Min 5 years of HDB new build or JTC projects relevant working experience
• Good communication skills and a team player
• Positive working attitude and highly adaptable

Roles and Responsibilities

1. Planning and coordination, and ensuring schedule aligns with project timelines and client deadlines

2. Understanding regulatory requirements and ensuring that all procedures comply with relevant directives.

3. Preparation in accordance to specified standards to ensure accuracy.

4. Troubleshooting and problem-solving, to identify any issues or non-compliance, and to develop solutions for mitigating any problems.

5. Preparing detailed test reports and documenting any procedures, results and conclusions, and ensuring thoroughness and accuracy while complying with regulatory requirements

6. Communicating findings to relevant stakeholders, including project managers, and regulatory bodies.

7. Stay up-to-date about advancements in techniques and technologies and to implement best practice to enhance testing efficiency and accuracy.

8. Providing training and support to other team members on procedures and standards and educating the organisation about the importance of compliance and its impact on product quality and regulatory approval.

· 5 days’ work week

· Central area near MRT

· Reputable and stable organization

Job Responsibilities:

· Provide pre-sales and post-sales technical support to customers and internal sales team, handling customer NDA and sample request

· Collect customers’ feedback and provide recommendation to customer for design requirements, product enhancements and capture new product opportunities

· Responsible for identifying and clarifying any technical issues related to new or existing products, and clearly communicate findings to the respective business unit

· Hands-on technical support to customers, documenting problems, and suggesting solutions

· Report design, reliability and functional problems to the appropriate groups within company & associate groups and work to solve problems

Requirements:

· Degree in Engineering (Electronics) or equivalent

· 5 years of technical customer support experience in semiconductor industry

· Field experience or hands-on practice or knowledge of multi-disciplinary system design and development

· Knowledge of Smart Card, RFID and microcontroller products; knowledge of physical access control and the security industry is desirable

· Experience with or knowledge of one or more of: CCD, CMOS image sensors, image capture, video standards, image processing

We would like to invite interested applicants to apply.

Thomas Tan

Registration No: 12C6253

License No: R2094900

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

General Overview

This position is part of the site Mechanical team that provides technical/maintenance support to the Operation and Project teams in LNG Terminal. He/she would be mainly responsible for overseeing the safe and reliable operations and maintenance of the Terminal assets from the Mechanical discipline perspective.

The incumbent is also responsible for establishing, reviewing and overseeing the relevant mechanical design elements of new build equipment / asset enhancement activities and implementation of minor mechanical engineering projects, while ensuring the overall mechanical integrity of the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Provide technical/maintenance support and solutions to the terminal operation Teams including supporting the development of maintenance strategy focusing on equipment reliability, compliance, spares inventory requirement, preventive and predictive maintenance programmes and mechanical maintenance procedures for mechanical equipment.
• Lead the maintenance, troubleshooting, repair, commissioning and replacement of mechanical static equipment and piping systems.
• Manages the in-house contractor and equipment vendor to execute mechanical work/improvements within the terminal to ensure safe work execution and gas supply reliability
• Responsible to ensure compliance to applicable regulations/industry best practices, safe to operate, fit for purpose, maintainable and reliable for the site’s modified or newly build mechanical systems (such as marine loading arm, pumps, pressure vessel, safety device , etc).
• Manage and ensure list of statutory equipment (lifting machine, lifting gears, pressure vessel, safety valves, etc) are timely serviced and inspected in accordance to statutory codes and compliance standards
• Perform root cause analysis on equipment failure and provide recommendations to resolve technical issues which may also arise from vibration, RT, UT, oil and other analysis as part of predictive maintenance programmes
• Manage and maintain historical information on static and rotating equipment such as running hours, data statistical information on all plant shut down and loss of production events caused by mechanical systems, engineering documents and review applicable codes and standards for compliance purpose
• Lead technical discussions, execute and manage project schedules and cost and collaboration with external and internal stakeholders, vendors for end of life and improvement project using SLNG Management of Change (MOC) process for mechanical equipment
• Liaise with external stakeholder including government agencies on approval and risk of shutdown of mechanical system that will affect gas-send out
• Participate in RCA, RBI, HAZID, HAZOP, Model Review studies for mechanical packages, co-ordinates and close out Mechanical related issues
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose

Work Experience

• Minimum of 3-5 years’ experience in maintenance of plant equipment, rotating machinery and static equipment, preferably in oil/petrochemical or related industries
• Good knowledge and experience working on different types of in-service pipeline inspection. Knowledge of the LNG / natural gas or other hydrocarbon industries an advantage
• Relevant technical experience in maintenance of mechanical/ machinery systems i.e compressor, pump, pressure vessel, hydraulic components and piping system.
• Conversant with local codes, regulations and standards, equipment inspection and schedule requirements. Certified in API, vibration and other analysis standards will be well regarded
• The incumbent should possess the following personal attributes:

1. A team player who can work well in a team and with good listening skill
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments
3. Willing to take up new challenges and responsibilities

Education

• Bachelor Degree in Mechanical Engineering or other relevant Engineering/Technical disciplines
• Candidates with professional accreditation or affiliation to professional bodies of engineers will have an advantage

Job Description & Requirements

- Administer project planning and project execution
- To study drawings, specifications and contracts to understand project requirements
- Willing to learn and hands-on
- Liaise with client, consultants & main / sub-contractors and coordinate for site activities arrangement
- Perform site inspection and ensure all project activities are performed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner
- Assist in cost control and estimating activities;
- Planning and deployment of resources such as manpower, machinery, equipment and material
- Preparation of report, Method Statements and technical submissions
- Ensure the project complies with regulations and clients’ specifications
- Adhere to safety and health regulations and aim for zero accident in the workplace
- Ensure safety and housekeeping is to maintained to the highest standard
- Prepare job completion record and progress claims
- Continually seek improvements in the work systems
- Ensure all company reports and documentation are completed accurately and on time;
- To perform Ad-Hoc duties as per assigned

- Fresh Graduates are welcome to apply

SepPure Technologies is a CleanTech company that is revolutionizing the energy-intensive chemical separation processes through the application of novel membrane materials and processes. If you enjoy working in an innovative environment, we have a great opportunity for you. At SepPure Technologies, we believe in making a positive impact on the world through sustainable technology. Our chemical-resistant nanofiltration membranes are disrupting traditional chemical separation processes, such as distillation and evaporation, and reducing global energy use, emissions, and pollution. With up to 15% of the world’s total energy spent on industrial-scale chemical separations, SepPure Technologies’ sustainable process is a game changer. We are currently working on transformative projects edible oil, pharmaceutical, semiconductor, solvents, and fine-chemical industries. Join us on our mission to create a sustainable future through CleanTech innovation.

Role Summary

As a QHSE Engineer / Senior Engineer, you will play a critical role in ensuring our quality, health, safety, and environmental standards are met. This role offers the opportunity to develop and implement robust QHSE frameworks, ensuring compliance while fostering a culture of continuous improvement. You will work closely with cross-functional teams to support operational excellence and sustainability initiatives.

Responsibilities

• Develop, implement, and maintain Quality, Health, Safety, and Environmental (QHSE) management systems in compliance with industry standards and regulatory requirements.
• Conduct regular audits, inspections, and risk assessments to ensure compliance with QHSE policies and procedures.
• Identify areas for improvement in QHSE processes and recommend actionable solutions.
• Ensure the timely maintenance of all assets, including equipment and facilities, and maintain accurate and up-to-date maintenance records.
• Obtain and renew licenses and permits required from regulatory agencies such as NEA, SCDF, MOM, and other relevant authorities.
• Conduct monthly safety briefings, toolbox meetings, and other safety awareness initiatives to foster a culture of safety across the organization.
• Provide regular updates on QHSE status and initiatives through email newsletters and other internal communication channels.
• Coordinate and monitor QC testing (incoming materials, in-process, and final inspections) in alignment with company SOPs.
• Investigate and resolve quality issues, non-conformities, and customer complaints, implementing corrective and preventive actions.
• Prepare and deliver QHSE training programs to promote awareness and engagement across teams.
• Monitor and report on key performance indicators (KPIs) related to quality, safety, and environmental performance.
• Collaborate with internal and external stakeholders to ensure consistent adherence to QHSE standards.
• Maintain up-to-date documentation, including procedures, manuals, and records, for internal and external audits.
• Support new product development and operational initiatives by providing QHSE input during design and implementation stages.
• Stay updated on industry best practices and regulatory changes to drive continuous improvement in QHSE practices.
• Lead emergency response planning, drills, and incident investigations, ensuring proper follow-up actions are implemented and documented.
• Foster a proactive safety culture by encouraging hazard reporting, near-miss tracking, and continuous feedback from employees.
• Perform any other duties assigned to support organizational goals.

Requirements

• Bachelor's degree in Engineering, Quality Management, or a related field.
• 2–5 years of experience in QHSE roles within manufacturing or related industries. (Senior Engineer candidates should have 5+ years of relevant experience.)
• In-depth knowledge of ISO 9001, ISO 14001, and ISO 45001 standards.
• Experience in conducting audits, risk assessments, and implementing corrective actions.
• Strong analytical and problem-solving skills, with a focus on data-driven decision-making.
• Proficiency in Microsoft Office Suite and reporting monthly updates.
• Excellent verbal and written communication skills.
• Ability to work collaboratively in a fast-paced and innovative environment.
• Relevant certifications (e.g., WSH, QMS Internal Audit, or equivalent) are a plus.

Why Join Us?

You will get an opportunity to work in a fast-paced start-up environment, take ownership of tasks, and make a significant contribution to our company's growth. Our internship program will provide you with real-world experience, mentoring, and networking opportunities.

If you're excited about the chance to shape the future of our quality processes and help build a world-class product, we'd love to hear from you.

SepPure Technologies is an equal opportunity employer and is committed to fostering a diverse and inclusive workplace. We encourage applications from candidates of all backgrounds and experiences.

To apply, please submit your CV and cover letter, detailing your relevant experience and interest in the position. We thank all applicants for their interest; however, only those selected for an interview will be contacted.

Our esteemed client, an established MNC, is searching for an QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: 5-day work week
• Working Hours: 8:15 am to 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

• Identifying deficiencies in mechanical processes and developing improvements

• Designing and developing prototypes

• Analyzing and testing prototypes and each revision of a device

• Supervising the development of computer-aided design (CAD) project drawings from junior team members

• Developing, initiating and managing all phases of projects

• Preparing documentation of critical analysis and providing suggestions for correcting errors

• Collaborating with Production Managers for proper allocation and tracking of resources

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Our Company
Powerzone H2 Technologies is a provider focusing on the design, manufacture, and distribution of PEM fuel cells.
We aspire to be the leader in Hydrogen fuel cell system integrator and solution provider in the APAC region.
We are hiring a talented engineering professional to join our team.
If you're excited to be part of a winning team, Powerzone H2 Technologies is a great place to grow your career.

Job Scope

· Work with the research center for scale-up production/ manufacturing· Troubleshoot and advise on electrical and mechanical Fuel cell systems together with superior. Do fuel cell product testing

· Monitoring stock level and dealing with suppliers for the production process

· Answer all technical enquires and maintenance requirements from customers as assigned by the Manager

· Complete projects on time and within budget. Carry out any other work directly by your immediate superior or Director

· Cooperate with the team to solve problems

Requirement

· Bachelor's Degree or equivalent in Engineering or Other Advanced Diploma / Post-Diploma qualifications in Electronic Certificate equivalent

· With at least 2 years of working experience in a relevant field ( Fresh graduates are welcome to apply)

· Good computer skills i.e MS Office Suite and MS Project, Autocad, Photoshop

· Fast learner

· Good problem-solving, organizational, analytical, and critical thinking skills

· Ability to manage your project effectively

· Must be able to work in a team environment, including the ability to manage vendors and project stakeholders

· Demonstrate proactiveness in handling tasks at hand.

· Previous experience working with lab/industrial equipment required (if applicable)

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

• Designing, developing and enhancing electro-mechanical systems and mechatronic devices.
• Creating automated systems and the software to control them.
• Conducting research, documenting findings, and presenting reports at meetings.
• Developing design documents for mechanical parts and final products.
• Identifying areas of weakness in the Equipment and making recommendations for improvement.
• Understanding problems or client briefs and developing solutions that satisfy them.
• Selecting the required tools and materials for the process.
• Assisting with recruitment, onboarding, and training of junior Engineers or Apprentices.
• Attending workshops, training sessions, and conferences to network with others and stay on top of field advancements.
• willing to do night shift
• any service requirement from the site must go and attend any time
• Willing to work Night Shift

· Site project management.

· Overall project planning, scheduling, monitoring and updating to meet project completion targets.

· Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

· Work closely with sub-contractors on project progress and ensure timely work arrangements

· Liaise with consultant and carry out site inspection.

· Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

· Preparation of structural analysis, loading calculation and drawings.

· Establish good relationship with all relevant parties.

· Ensure site safety & compliance to authorities’ requirements.

Requirement

- Degree in Civil or relevant Engineering

- 3-5 years’ minimum experience in Infra-structure project more than 200million.