Job Responsibilities:

Identify, select, and evaluate new equipment/ new technology to support current and future requirements

• Define, development and establish new equipment design/ capability requirements aligned to Process and Packaging Roadmap
• Develop and engage creative solution for new equipment capabilities/ solution to identified constraints or future technology requirements
• Work with equipment suppliers to develop new capability
• Engage in active participation in Package Development Engineering activities
• Conducts equipment benchmarking to establish the equipment suppliers and platforms for future need
• Create decision matrix for equipment and material selection

Evaluate and qualify new equipment platform and handover to production group

• Plan/submit capital request to acquire new Equipment
• Create and owner of purchasing specification (Doc2) document
• Establish the new equipment qualification criteria and activities roadmap with respective functional teams
• Establish project handover requirements and procedures upon machine qualification
• Prepare documentation for handing over with respective site owner
• Conduct data gathering for low volume production
• Conduct training for Site representatives
• Feedback loop for Continuous Improvement after mass volume production via collaborate with production and HVM team on existing production equipment enhancement through continuous improvement projects

Maintain a matrix of key equipment platform capability and constraints (Equipment Maturity Index, EMI & Tool of Records, TOR) on current and new equipment platform

• Driving EMI, a system to standardize equipment maturity expectations, metrics to communicate tool manufacturing readiness, analyze the requirements to advance tool maturity level
• Maintain and regularly update the TOR, with inputs from local or other assembly site
• Maintain general knowledge of process and material characteristics and translate to equipment design requirement
• Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Equipment System Readiness, Enablement & Enhancement

• Conduct equipment characterization, identify and enable the critical equipment parameter monitoring system
• Working with PCS, IT & Automation team to enable tool control system such as FDC (fault detection & classification), E3 (enterprise equipment engineering), APC (advanced process control), tool alarm system, IOT, ECM (equipment constant management), R2R (run to run) and other equipment control system whichever applicable
• Equipment automation solution enablement for both system datamation (tool- micron host communication) and factory AMHS readiness and deployment from equipment perspective follow by working with IT & automation team to delivery full automation solution for production running support

Supplier Management & Engagement Program

• Working on several engagement forum from ERM (executive review meeting), TRM (technical review meeting), QBR (quarterly business review) to CIP review to strategize and ensure supplier understand and focus on identified priorities by business value ensuring focus on the greatest benefit
• Manage all the key and critical engagement activities between Micron and supplier to prioritize and enable quality and tool performance improvement
• Collaborate with supplier on technology and path finding focus, engineering improvement, manufacturing efficiency focus which focus on roadmap development/ solution and H2H partnership with competitive landscape strategies

Job Requirements/ Qualifications:

• PhD/Masters/Bachelor’s Degree in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics or Equivalent Work Experience Required
• Basic knowledge in semiconductor manufacturing assembly, wafer bumping packaging technologies & advanced packaging techniques
• Minimum 3 years’ experience in related semiconductor industry or related manufacturing environment
• Experience with technical knowledge on assembly and/or wafer bumping and/ or advanced packaging technology
• Understanding and/or experience in equipment automation solution e.g. GEM300, AMHS and IIOT solution for datamation such as APC, FDC, E3, PCS, SPC) is a plus
• Fast learner, with initiative and independence (min supervision), good team player, ability to integrate and cooperate with cross function teams and external vendors
• Strong communication (verbal & written) and presentation skills (English speaking is must)
• Understanding of business needs and customers’ requirement, able to participate in cross functional team environment
• Strong project management skills to ensure execution to timelines

Job Responsibilities:

Identify, select, and evaluate new equipment/ new technology to support current and future requirements

• Define, development and establish new equipment design/ capability requirements aligned to Process and Packaging Roadmap
• Develop and engage creative solution for new equipment capabilities/ solution to identified constraints or future technology requirements
• Work with equipment suppliers to develop new capability
• Engage in active participation in Package Development Engineering activities
• Conducts equipment benchmarking to establish the equipment suppliers and platforms for future need
• Create decision matrix for equipment and material selection

Evaluate and qualify new equipment platform and handover to production group

• Plan/submit capital request to acquire new Equipment
• Create and owner of purchasing specification (Doc2) document
• Establish the new equipment qualification criteria and activities roadmap with respective functional teams
• Establish project handover requirements and procedures upon machine qualification
• Prepare documentation for handing over with respective site owner
• Conduct data gathering for low volume production
• Conduct training for Site representatives
• Feedback loop for Continuous Improvement after mass volume production via collaborate with production and HVM team on existing production equipment enhancement through continuous improvement projects

Maintain a matrix of key equipment platform capability and constraints (Equipment Maturity Index, EMI & Tool of Records, TOR) on current and new equipment platform

• Driving EMI, a system to standardize equipment maturity expectations, metrics to communicate tool manufacturing readiness, analyze the requirements to advance tool maturity level
• Maintain and regularly update the TOR, with inputs from local or other assembly site
• Maintain general knowledge of process and material characteristics and translate to equipment design requirement
• Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Equipment System Readiness, Enablement & Enhancement

• Conduct equipment characterization, identify and enable the critical equipment parameter monitoring system
• Working with PCS, IT & Automation team to enable tool control system such as FDC (fault detection & classification), E3 (enterprise equipment engineering), APC (advanced process control), tool alarm system, IOT, ECM (equipment constant management), R2R (run to run) and other equipment control system whichever applicable
• Equipment automation solution enablement for both system datamation (tool- micron host communication) and factory AMHS readiness and deployment from equipment perspective follow by working with IT & automation team to delivery full automation solution for production running support

Supplier Management & Engagement Program

• Working on several engagement forum from ERM (executive review meeting), TRM (technical review meeting), QBR (quarterly business review) to CIP review to strategize and ensure supplier understand and focus on identified priorities by business value ensuring focus on the greatest benefit
• Manage all the key and critical engagement activities between Micron and supplier to prioritize and enable quality and tool performance improvement
• Collaborate with supplier on technology and path finding focus, engineering improvement, manufacturing efficiency focus which focus on roadmap development/ solution and H2H partnership with competitive landscape strategies

Job Requirements/ Qualifications:

• PhD/Masters/Bachelor’s Degree in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics or Equivalent Work Experience Required
• Basic knowledge in semiconductor manufacturing assembly, wafer bumping packaging technologies & advanced packaging techniques
• Minimum 3 years’ experience in related semiconductor industry or related manufacturing environment
• Experience with technical knowledge on assembly and/or wafer bumping and/ or advanced packaging technology
• Understanding and/or experience in equipment automation solution e.g. GEM300, AMHS and IIOT solution for datamation such as APC, FDC, E3, PCS, SPC) is a plus
• Fast learner, with initiative and independence (min supervision), good team player, ability to integrate and cooperate with cross function teams and external vendors
• Strong communication (verbal & written) and presentation skills (English speaking is must)
• Understanding of business needs and customers’ requirement, able to participate in cross functional team environment
• Strong project management skills to ensure execution to timelines

Company Overview

Ambiq's mission is to develop the lowest-power semiconductor solutions to enable intelligent devices everywhere by developing the lowest-power semiconductor solutions to drive a more energy-efficient, sustainable, and data-driven world. Ambiq has helped leading manufacturers worldwide develop products that last weeks on a single charge (rather than days), while delivering a maximum feature set in compact industrial designs. Ambiq's goal is to take Artificial Intelligence (AI) where it has never gone before in mobile and portable devices, using Ambiq's advanced ultra-low power system on chip (SoC) solutions. Ambiq has shipped more than 250 million units by 2024. For more information, visit?www.ambiq.com.

Our innovative and fast-moving teams of research, development, production, marketing, sales, and operations are spread across several continents, including the US (Austin and San Jose), Taiwan (Hsinchu), China (Shenzhen and Shanghai), Japan (Tokyo), and Singapore. We value continued technology innovation, fanatical attention to customer needs, collaborative decision-making, and enthusiasm for energy efficiency. We embrace candidates who also share these same values. The successful candidate must be self-motivated, creative, and comfortable learning and driving exciting new technologies. We encourage and nurture an environment for growth and opportunities to work on complex, engaging, and challenging projects that will create a lasting impact. Join us on our quest for 100 billion devices. The endpoint intelligence revolution starts here.

Scope

The Timing Lead Engineer will plan and lead timing-related activities for Ambiq’s next-generation technology development. This will include defining signoff criteria, analyzing, developing design methodology, and managing tape-outs day-to-day driven by Ambiq’s Advanced Development team. The lead will work closely with other members of the Advanced Development team and the broader engineering community at Ambiq to develop and deploy Timing signoff-related flows and methodologies to support production chip development.

The successful candidate will be comfortable working both independently and in a leadership position, collaborating with a variety of senior engineers. The successful candidate will also be comfortable with the uncertainty of new methodology development and have a strong sense of independent drive.

Specific Responsibilities

• Define and own SoC timing signoff criteria, process corners, derates, uncertainties, and their tradeoffs. Be responsible for delivering system-on-chip (SoC) Full-Chip Static Timing Analysis.
• Define and own full chip timing constraint creation and validation, timing signoff checklist criteria, perform full chip STA, timing ECO creation and oversee final timing signoff for SoCs. Drive clock tree planning and implementation for SoCs to achieve best energy, performance, and area.
• Be responsible for synthesis, PI, reliability signoff and ESD analysis, drive feedback, and recommend design solutions. Work with product development teams to rapidly deploy timing related methods in products.
• Plan and lead timing and other related activities for test chips owned by the Advanced Development team. As part of this effort, lead a small group of internal and/or contract resources.
• Maintain a relationship with and collaborate with 3rd party CAD tool vendors and fab during the development of new flows and methodologies. Validate and refine new techniques as part of a team that is building complex test chips in advanced FinFET nodes.

Requirements

• A bachelor’s or master’s degree in electrical engineering or a related field is required.
• Minimum 10 years of experience of hands-on experience in Static Timing Analysis, flows and methodologies for timing closure and have a strong understanding of noise, crosstalk, and OCV effects, aging, HTOL, soft errors in advanced FinFET nodes (16nm, 12nm, 7nm, 5nm)
• Proficient in Synthesis, place and route, UPF, Power integrity and reliability signoffs. Familiar with circuit modeling, including SPICE models, and worst-case corner selection.
• Experience with large design STA and Timing Closure. Familiar with ECO techniques and implementation. Experience with STA signoff constraint authoring for full-chip level, tape-out signoff requirements, checklists, and associated automation.
• Experience in Cadence EDA tools (e.g., Genus, Innovus Tempus).
• Experience developing new technologies and transitioning those technologies to production is highly desirable. Familiar with important aspects of timing of SoC designs in bulk and FinFET technologies.
• Good programming skills with Perl and TCL.

This role is responsible for one of the front-end process modules in Office Printhead or PageWide Printbar manufacturing lines and required to apply subject matter knowledge to drive technical and operational excellence in the manufacturing processes. Expected also to work on problems of diverse complexity and scope.

May participate in project team activities and facilitates information validation and team decision making process. Exercises independent judgment within generally defined policies and practices to identify and select a solution. Ability to handle most unique situations. May seek advice in order to make decisions on complex business issues.

Responsibilities

• Designs engineering solutions, including methods, operation sequences, and processes for the manufacturing of parts, component sub- assemblies, and final assemblies, based on established engineering principles and in accordance with general specifications and requirements.
• Lead issue diagnosis and problem-solving, using a systematic problem solving approach.
• Work in a project team of other manufacturing engineers and internal and outsourced manufacturing partners to develop and execute reliable, cost effective and high quality manufacturing solutions for moderately-complex products from new- product introduction through end of lifecycle.
• Delivers professionally written reports, and supports realization of operational and strategic plans.
• Collaborates and communicates with management, internal and external partners in outsourced manufacturing or development r regarding process and standards compliance, recording and reporting issues, and recommendations for problem resolution for manufacture of existing products.
• Represents the manufacturing engineering team for all phases of larger and more- complex development and manufacturing projects.

Education & Experience Recommended
• Bachelor’s or Master’s degree in Manufacturing engineering, Mechanical Engineering, or any other manufacturing related discipline
• Typically has 2-4 years of work experience, preferably in product/process engineering, or a related field or an advanced degree with 0-2 years of work experience.

Knowledge & Skills

• Using engineering tools and software packages to design and automate manufacturing processes.
• Strong analytical and problem-solving skills.
• Competent in adopting manufacturing methodologies such as Lean Manufacturing, Continuous Improvement etc.
• Understanding of material properties and hardware and electrical component design.
• Using empirical analysis, modeling and methodologies to validate manufacturing process and tooling design and specifications.
• Proficient in English. Good written and verbal communication skills.
• Ability to effectively communicate ideas to stakeholders
• Competency in Industry 4.0 technologies/Digitalization/Data Analytics is a plus.

Impact & Scope
• Impacts immediate team and acts as an informed team member providing analysis of information and limited project direction input.

Complexity
• Responds to routine issues within established guidelines.

Disclaimer
• This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

About the Company

Our Client is an innovator and leader in the mobility space.

Responsibilities

We’re looking for a Software Engineer (Full-Stack) to provide technical expertise and perform hands-on development and maintenance of the company’s web applications.

• Perform hands-on software development for both frontend and backend;
• Ensure that code and tests are well-designed and of high quality;
• Troubleshoot and find solutions for complex technical issues;
• Work closely with product and engineering teams to ensure strong alignment;
• Identify any risks and suggest mitigations;
• Ensure proper documentation.

Requirements

• Degree in Computer Science or a relevant discipline;
• At least 3 years of experience in full-stack software engineering;
• Technical proficiency and proven experience in React, Angular, and/or Typescript;
• Proven experience in microservices;
• Familiar with in agile methodologies;
• Understanding of software engineering best practices.

Employment Details

• Permanent role;
• Hybrid work arrangement;
• Excellent career progression and advancement opportunities.

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

About the Company

We tackle engineering challenges to ensure data consistency, security, and scalability. Collaborating with data experts, we optimize models and platforms to enhance user understanding and campaign delivery, fostering growth in a competitive market.

About the Job

You will design, architect, and develop internal systems and platforms.Collaborate with cross-functional teams to integrate back-end systems with front-end platforms and databases seamlessly. Other responsibilities are as follows:

• Optimize the scalability, performance, and reliability of back-end systems.
• Identify and resolve technical issues to ensure smooth operation of systems.
• Contribute to enhancing software development practices, maintaining high standards for code quality, testing, and deployment.
• Create and maintain documentation on technical designs, system configurations, and implementation details for internal use.

Requirements

You would need a min Bachelor’s degree in Computer Science, Software Engineering, or a related field.

• Min 5 years of professional experience in a similar role.
• Strong coding and documentation practices, attention to code style, familiarity with design patterns and principles, and a focus on continuous project optimization.
• Proficiency in programming languages Java or Golang.
• Familiarity with common Internet technologies such as Linux systems, MySQL, RPC, MQ, caching technologies, and microservice architectures. Experience in API development and integration is essential.
• Strong understanding of business needs, with experience leading or contributing to large-scale software platform projects, particularly in process systems and middleware development.
• Experience with user growth (paid acquisition) systems is a plus.
• Experience with JavaScript, CSS, and frontend frameworks like React or Vue is a plus.

R1332781

Responsibilities

• Analyse client needs, scope problems, and develop business cases to address them.
• Document requirements, source, and evaluate alternatives, and recommend suitable solutions that best aligns with specific client needs.
• Collaborate with client and application vendors for solution design and to seek clarification and acceptance.
• Design, develop, and deliver software applications that satisfies customer expectations.
• Improve software quality using XP practices, including code review and unit testing.
• Prepare architectural and other technical documentation.
• Assist Business Analysts with user stories elaboration.
• Support QA teams with test automation and bug fixes.
• Assist DevOps teams with build and release automation.
• Work with Client users to ensure smooth deployment and adoption of new solutions.
• Assess business needs for service requests and the impact of enhancements to the system.
• Evaluate problem resolution approaches and implement effective recovery plans for ICT incidents, establishing processes to prevent recurrence.
• Understand IT management policies, quality management policies, and security guidelines to ensure compliance in development processes.

Requirements

• Degree or Diploma in Computer Science, Computer/Electronics Engineering, Information Technology or related disciplines.
• Prior experience with version control systems such as Git.
• Proficiency in front end technologies such as Angular.
• Prior experience in backend technologies such as Java, Python, Node.js.
• Proven experience in low code application platforms such as Pega.
• Knowledge in one or more of the following processes: agile processes, continuous integration/deployment, cloud/PaaS platforms (e.g., AWS, GCP), serverless frameworks, and container technology like Docker would be an added advantage.
• Prior experience with low code development and wireframing tools such as Figma
• Familiarity with unit testing.
• Additional advantageous traits include being self-driven, independent, strong problem-solving skills, good communication, interpersonal skills, and excellent presentation and listening abilities.
• Hands-on experience with at least one full project development lifecycle in Pega.
• Relevant professional certification in Pega is a plus.
• Prior experience in Agile and UX development environments is an added advantage.
• Advantageous skills include consulting or business analysis experience, knowledge of system solutioning for mid/large-scale projects, understanding of web services, REST APIs, sFTP, and security concepts.
• Extensive experience in defining UAT test scenarios and facilitate SIT and UAT tests.
• Ability to define system interface specifications.

Interested applicants, please Email , and look for [email protected]

John (Joax) Wong

Recruit Express Pte Ltd

EA License No. 99C4599

EA Personnel Registration Number: R23117179

We regret that only shortlisted candidates will be contacted.

• Develop technical specification and schematic drawings for the OT systems integrated into the shipboard network as part of the organization’s digitalization project roadmap
• Coordinate IT and OT project activities to ensure timely delivery and adherence to project timelines
• Provide onboard and remote support maintenance for the OT systems and network architecture onboard
• Analyse IT/OT design and implementation issues that affect delivery of project deliverables and to propose/implement short-term and long-term solutions
• Develop and maintain comprehensive documentation (e.g. IT / OT Inventory Asset Register) for IT and OT systems, including network drawing, user manuals, and operating procedures.
• Provide support to the implementation of IT/OT Governance Procedures through the participation of:
• vessel New Buildings’ plan approval process for OT systems and network architecture design
• evaluation and risk assessment process of new OT systems introduced in the shipboard network
• System Integration Test (SIT) / User Acceptance Test (UAT) of Vessel’s OT systems
• review process of VLAN and firewall configuration with the vendors and makers
• Provide support to the implementation of Cyber Security projects across vessels with the aim to align with the corporate standards and regulatory requirements.

Minimum Requirements:

• At least 3 to 5 years of working experience in maritime IT, in one or more of the following domains (e.g. shipboard IT and OT systems – engine automation, navigation, trim/fuel/route optimization, cybersecurity, incident handling, investigation)
• Good level of knowledge and hands-on experience in network designs and troubleshooting for vessels
• Occasional ship-boarding for site surveys and onsite system troubleshooting will be required.
• Tertiary qualification in IT networking qualification and Marine Engineering or equivalent.
• Professional accreditation such as CCNP, NSE 6.0 and above will be an advantage.
• Good knowledge in cyber security best practices is highly preferred.

Responsibilities

· Understand customer demands, challenges, and objectives through assessments, information gathering and Customers, technology/industrial engagements

· Collaboration with sales & business development, product & engineering stakeholders including analyse and selection of appropriate hardware, software, and services to create the winning solution offering to customer and markets

· Developing detailed proposals, presentations, and technical documentation that outline the proposed solutions, including features, benefits, and pricing. Presenting these proposals to customers in a clear and compelling manner

· Preparation and conduct of product and solution exhibitions, demonstrations and proof-of-concept activities to showcase the capabilities and address any technical questions or concerns from customers

· Providing technical expertise and support to business development & sales team throughout the sales cycle, including participating in customer meetings, responding to technical queries, and contributing to the development of sales strategies

· Building and maintaining relationships with technology vendors and partners to stay informed about the latest products, technologies, and industry trends. This includes evaluating new solutions and incorporating them into proposed designs

· Keeping up-to-date with advancements in communication technologies, industry standards, and best practices. Pursuing opportunities to enhance technical skills and knowledge

Requirements

· Degree in Electrical/Electronics/Communications Engineering

• Minimum 5 years’ experience in Communications/Telecommunications/Infosystems Solutions Engineering and Implementations, supporting as a Pre-Sales capacity

· Strong understanding of communications technology

· Able to follow up closely with customers in order to answer to their needs

· Working location is in Jurong East

· Singaporeans Only

Please submit resumes to [email protected]

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Summary:

This role is part of the GM Resilience program, focused on standardizing and enhancing automation for Equity Derivatives trade processing in China, with future extensions to other APAC locations. The candidate will drive systems implementation, stock migration, and governance, ensuring robust operational processing models and technical transformations for Equity Derivatives.

Responsibilities:

• Gather requirements and prepare high-level functional specifications.
• Develop and manage project plans, delivery coordination, and governance.
• Coordinate with IT teams, front office, operations, and finance stakeholders for onboarding and capacity planning.
• Oversee test management for the front-to-finance chain.
• Manage stakeholder relationships, run program governance, and organize operational and working committees.

Requirements:

• Strong understanding of transversal architecture in a Capital Markets context.
• Basic technical analysis skills for systems interfacing, gap identification, and resolution proposals.
• Knowledge of the Trade lifecycle and Equity Derivative products.
• Experience working in matrix organizations and with stakeholders across geographies.
• Proven ability to manage projects with CXO-level stakeholders as sponsors.

Qualifications:

• Minimum of 5 years of experience in Business Analysis or Project Management.
• Exposure to Equity Derivatives trade processing systems implementation.
• Experience in front-to-back project implementation, including referential, trade booking, settlement, regulatory reporting, accounting, and group reporting chains.
• Bachelor’s degree or equivalent (minimum 3 years).
• Analytical ability.
• Critical thinking and proactivity.
• Ability to develop and adapt processes.
• Attention to detail and rigor.
• Strong communication and stakeholder management skills.

Sales Engineer / Sales Specialist

(Barcode and Office Automation solutions)

Working Day: Monday – Friday (8.30am – 6pm)
Working location: Ubi
Salary: SGD 2,200 – SGD 2,500 + Commission + Allowance

Job Description:

• Active canvasing for new customer base
• Achievement of agreed upon sales targets and outcomes within schedule
• Pre-sales activities to ensure healthy pipeline and good closure rate, with post-sales activities occasionally according to sales requirement
• Performance of sales cycle which includes sales quotation, order confirmation, purchase requisition, delivery (urgent case), installation (occasionally), payment collection

Requirements:

• Basic IT knowledge in Tele-Communication, Excel, PowerPoint
• Polytechnic Diploma - Electrical & Electronics Engineering is preferably.
• IT Solution selling and experiences in Electronics, Transport, Logistics, Aerospace, Hospitality industries is preferable.

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Responsibilities

You will support the RPA Development team in the following:

• Evaluate and assess processes based on feasibility, automation potential, and alignment with business objectives
• Collaborate with internal and external stakeholders to develop automation solutions that add value to business processes
• Cultivate and maintain strong relationships with key stakeholders to ensure successful RPA implementation
• Work with cross-functional teams to design, develop, and implement RPA-driven improvements
• Conduct testing or proof of concept (POC) to identify opportunities for potential automation use cases
• Provide ongoing support for RPA solutions by monitoring performance, fixing issues, and making updates to keep everything running smoothly.

Requirements

You should have the following work experience and knowledge:

• At least 2 years of professional experience in software development, focusing on RPA and VBA automation.

You should posses the following skill sets:

- Programming Proficiency: Strong programming skills in VB.NET, C#, Python, and NodeJS, with a solid understanding of various database technologies, including SQL and NoSQL, to support RPA deployments.

- Analytical Thinking and Problem-Solving: Exceptional problem-solving abilities and analytical skills to navigate complex projects independently and efficiently, especially under tight deadlines.

- Process Optimization: Robust knowledge of process analysis, design, and optimization, with a keen interest in advancing skills in RPA, AI, and other automation technologies.

- Communication and Collaboration: Good communication skills, capable of delivering clear and effective messages to engage stakeholders, along with strong teamwork abilities.

- Personal Effectiveness: A self-starter who can work independently, manage multiple tasks and projects efficiently, and consistently meet deadlines.

All applicants will be notified on whether they are shortlisted or not within 4 weeks of the closing date of this job posting.

Responsibilities:

• After market sales related promotion to existing customers in Singapore
• Regular " patrol " activity as pro-active maintenance promotion. Patrol / Check machine condition / Report / Service proposal with quotation & manage prospective / secure order / execute maintenance job by team
• Solutioning skills such as Troubleshooting / proper report and action order to the team.
• Compressor system improvement proposals
• Energy saving proposal with existing system diagnosis
• Help up and coordination with Sales & Marketing department. Job task share when the existing customer does machine replacement or expansion / upgrading orders.

Requirements

• Diploma or above in Engineering related academic
• More than 3 years experience in similar industry
• Possess Class 3 Driving License.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

Your Role

We are looking for an experienced Maintenance & Service Engineer/ Electrical Engineer/ Senior Technician repair, maintenance and troubleshooting on electrical related work. You will perform preventive maintenance on machines and cost reduction. Support new equipment installation and major periodic maintenance activities as required.

What Will You Do

• Repair, maintenance and troubleshooting on electrical related work
• Perform preventive maintenance on machines and cost reduction
• Support new equipment installation and maintenance activities
• Other ad-hoc duties assigned by manager

What Do We Want

• Min Nitec/Diploma & above in electrical and electronic/ engineering / equivalent.
• At least 1-2 years & above of service experience in electrical background.
• Able to read electrical diagram and well verse with electrical repair (Electrical circuit)
• Class 3 driving license.

What Will You Get in Return
You will be given exposure to a hold a key position in a growing organization with attractive rewards and a wide range of benefits. You will entitle a Gross salary up to S$4000 + attractive perks.

What You Need to do Now
Click "Apply" and please include the following information in your resume:

• Personal Particulars with recent photograph
• Education background
• Work experiences in point forms
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

Note:
Only shortlisted candidate will be notified via email for an interview invitation

Job Responsibilities:-

• Utilize in-depth knowledge of Foundation IP to evaluate and qualify IP’s. Able to benchmark and optimize Std cells/IO’s/memory for optimum performance, area or power needs of a project
• Conduct Spice simulations to verify the performance and reliability of designs on RC extracted netlists
• Perform library characterization to ensure accurate timing, power, and area models. Stay up-to-date with industry trends and emerging technologies in library characterization and PPA analysis
• Help to develop and maintain EDA automation scripts to streamline CAD flow and design processes
• Modify and optimize IPQA scripts to improve efficiency and performance
• Analyze and understand both hard and soft IPs within SOC designs. Work with IP vendors to deliver custom specs needed for MXL project needs
• Review silicon reports and provide detailed analysis to identify and resolve issues
• Work closely with vendors and cross-functional teams to ensure successful project outcomes. Collaborate with design teams to ensure seamless integration of libraries and IP blocks
• Maintain comprehensive documentation of IP Vendor engagement. Troubleshoot and resolve issues related to IP, EDA tools and automation flows

Job Requirements:-

• Bachelor’s or Master’s Degree in Electrical Engineering, Computer Engineering, or a related field
• Minimum 10 years of experience in design engineering or a related field. Good understanding of the IC design flow, including front-end and back-end processes
• Proficiency in Foundation IP, Spice Simulation, Library Characterization, EDA automation scripts, and IP script modifications. Familiarity with library characterization tools such as Liberate, Cadence Genus, or Synopsys Library Compiler
• Strong ability to review and analyze silicon reports and provide detailed insights. Excellent analytical and problem-solving skills
• Excellent interpersonal and communication skills for effective collaboration with vendors and team members
• Experience with advanced node technologies (e.g., 8nm, 4nm, and below)
• Experience with SOC IP design and verification
• Knowledge of emerging technologies such as FinFET, FD-SOI, or III-V semiconductors
• Familiarity with industry-standard EDA tools and methodologies
• Experience with tools such as Synopsys PrimeTime, Cadence Genus, or Mentor Graphics Questa

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities:

• Assist Project Manager in daily site operation.

• Prepare Daily Report and submission.

• Prepare work Inspection Checklist and submission.

• Prepare materials request and arrange for delivery.

• Prepare request for fabrication.

• Receive and verify materials delivered and record GDN and DO.

• Update drawings and drawing register, receipt and issue of drawings.

• Ensure all documented records are properly filed.

• Organize the project site and other places of work so that all operations are carried out to the required standards with the minimum of risk to men, equipment and materials.

• Plan and maintain a tidy construction site.

• Arrange the delivery and stacking of material in such a manner as to avoid increasing the risks involved by double handling.

• Implement arrangements with sub-contractors and other contractors on the project site to avoid any confusion about areas of responsibility.

• Ensure that periodic tests, inspections and maintenance work are being carried out.

• Ensure that all repair and maintenance work carried out on the project site is done in a proper manner.

• Ensure that correct procedures and system of work are being developed and maintained.

• Attend promptly to all notified plant defects or bring to the attention of the relevant Foreman the need for Dangerous plant to be put out of service.

• Manage & Comply with Workplace Safety & Health for project execution.

Requirements:

• Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent

• Minimum 4 years of site experience in construction field is preferred.

• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner.

Our esteemed client, an established MNC, is searching for a QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: 5-day work week
• Working Hours: 8:15 am to 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, Etabs, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

• Dedicated, committed, a good team player
• Possesses excellent planning, analytical and organization skills
• Assist in engineering design and calculation
• Clarify and resolve technical issues with customer / contractor
• Structural drawing, calculation and analysis of the tower crane
• Other ad-hoc duties as and when assigned
• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• At least 1 Year(s) of working experience in the related field is required for this position.
• Fresh graduate are welcome
• Able to work at high element environment
• Willingness to travel in a short notice
• Required Skill(s): Solidworks, Steel Structural Design and Calculation, Mechanical Design, Mechanic of material, Microsoft office

Technical Superintendent

Salary: $7,000 to $10,000
Location: Alexandra Point / Fujairah Branch Office (Rotation travel)
Working hours: 5 days, 9.30am to 5.30pm

The company owns and manages a fleet of coastal tankers and barges operating in Singapore, Malaysia and in the South East Asia region. We are seeking for qualified candidates to take up the challenges of Technical Superintendent based in Singapore and on rotation shift in Fujairah.

Responsibilities:

• Maintain vessels to the requirement of Classification Society, Flag state, Port State, Oil majors and state regulations that the vessels are plying.
• Execute planned maintenance system and ensure compliance.
• Approve and monitor repairs, prepare purchase order and works order.
• Prepare dry-docking / repair specifications and monitor work progress.
• Maintain vessel allocated budget and meet operational standard as required by Owners.
• Carry out internal audits, risk assessment, incident investigation and closing out report.
• Attend to all inspections by Class Society, Flag State, Port State, Underwriters and Oil Majors.
• Liaise with Terminal Representative, Charterers, Agents, Operators and Fujairah Freezone Official.
• At the Fujairah branch office, to be the first point of contact for vessel matters.
• Assist Crew Department in coordinating crew matters.

Requirements:

• COC Class 1 or 2 holders with sailing experience on product tankers
• Minimum 3 to 5 years’ experience ashore as a Technical Superintendent in tanker companies
• Experience in handling Foreign going vessel
• Must be willing to travel abroad (Fujairah) on a rotational basis
• Familiar with Oil Majors vetting’s and inspections requirements