As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a novel near-eye display technology for augmented reality (AR).

Key Responsibilities

• Participate in the research project with Principal Investigator (PI), Co-PI and the research team members to ensure all project deliverables are met.
• Conduct research towards a novel near-eye display for augmented reality and develop a prototype.
• Coordinate procurement and liaison with vendors/suppliers and carry out other project related activities.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements

• A Bachelor/Master’s degree in computer, mechanics or related programmes.
• Knowledge and experience in near-eye display for VR/AR will be advantageous.
• Able to build and maintain strong working relationships with people within and external to the university.
• Show strong initiative and take ownership of work.
• Teamwork spirit

Key Competencies

• >= 2 years of research experience in near-eye display technologies for VR/MR.
• Teamwork spirit and ownership attitude.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Position: Production Engineer / Executive

• Location: Tanjong Penjuru
• Working hours: Mon to Fri from 7:30am to 5pm
• Salary: $3,500 - $4,000

Requirements:

• Min 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Computer literate.
• Knowledge in ISO is an advantage.
• Diploma or Degree in Manufacturing / Electrical /Mechanical / Engineering discipline

Responsibilities:

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with the HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practice. Also continually improve safety records by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas
• Evaluate, train and maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in the hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

What will you do?

• Manage a team of software engineers, including task planning and code reviews
• Take charge of technical projects and provide leadership in a fast-paced environment
• Responsible for the overall planning, execution, and success of complex technical projects
• Work closely with project management and experience design team to deliver project outcomes
• Contribute technically to projects
• Mentor the best talent bringing out the best in every engineer
• Nurture a culture of high performance, continuous improvement, creative problem solving, and innovation within the team

What are we looking for?

• Strong experience with Java Technologies
• Experience in ReactJS is a plus
• Software support and maintenance of deployed products and solutions
• At least 5 years of total software engineering experience with a thorough understanding of commercial software product development.
• 3+ years of experience in a software engineering leadership position
• Customer oriented and skilled in developing a strong understanding of customer needs and marrying those with optimal technology solutions
• Knowledge of Object Oriented Programming and SQL
• Ability to manage a hosting environment, including database administration as well as scaling applications to handle load changes
• Understanding of front-end web technologies
• Experienced in developing on Unix/Linux environments
• Enjoy constant learning and working with new technologies
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is required

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Scope:

• Test Planning and ExecutionDevelop, document, and implement comprehensive test plans, test cases, and test scripts.
• Execute manual and automated testing across various platforms, including functional, regression, performance, and usability testing.
• Identify, document, and track defects using appropriate tools
• Work closely with developers and product teams to reproduce, troubleshoot, and resolve issues.
• Quality Assurance ProcessesParticipate in requirements analysis to identify potential testing needs early in the development lifecycle.
• Ensure compliance with quality standards, industry regulations, and company policies.
• Automation and Tool ManagementDevelop and maintain automated test scripts to enhance testing efficiency.
• Select, configure, and maintain testing tools and frameworks.
• Collaboration and CommunicationCollaborate with developers, product managers, and other stakeholders to clarify requirements and ensure alignment on quality objectives.
• Provide regular updates on testing progress, quality metrics, and risks.

Requirements:

• Education: Bachelor’s degree in Mechanical, Electrical, Civil Construction field of study
• Excellent analytical, problem-solving, and communication skills.
• Commitment to work on weekend or public holidays when required

Job Summary (General Nature/Objectives of the Job):

A Civil Engineer in the construction industry is responsible for designing, planning, and overseeing the construction and maintenance of infrastructure projects such as roads, bridges, buildings, and water supply systems.

Key Responsibilities and Activities:

• Develop detailed designs and plans for construction projects, ensuring compliance with industry standards and regulations.

• Conduct site assessments to determine project feasibility, including soil testing and environmental impact studies.

• Oversee construction activities to ensure projects are completed on time, within budget, and to the required quality standards.

• Collaborate with architects, contractors, and other stakeholders to ensure seamless project execution.

• Ensure all construction activities adhere to health and safety regulations and environmental standards.

Behaviors Needed to Succeed:

Personal Competencies:

• Assess complex information to make informed decisions.

• Prioritize tasks to meet project deadlines.

• Adjust to changing project requirements and environments.

Technical Competencies:

• Skilled in tools such as AutoCAD, Civil 3D, and other relevant software.

• Understand the properties and applications of various construction materials.

• Familiarity with local and international building codes and standards.

Skills & Knowledge:

• Strong foundation in mathematics for design and analysis.

• Ability to plan, execute, and oversee projects effectively.

• Knowledge of sustainable construction practices.

Formal Education:

• Bachelor's Degree

Major Study/Specialization:

• Civil Engineering

Experience Required:

• Open to fresh graduates; prior internships or related experience are advantageous.

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

PFU Asia Pacific Pte Ltd ("PAPL") is assigned as the control center in managing scanner sales and marketing within Southest Asia region.

Join us as Technical Support Engineer to be an integral part of our regional sales team, helping to drive the growth of the Ricoh document scanners.

Responsibilities

1.Post-sales support :

- Provide technical support to partner or customer after purchasing our product.

- Assist technical team of partner and customer to tackle and resolve technical issue.

- Dissemble and assemble scanner according to maintenance manual(training will be provided).

- Train and enable service partner to provide post-sales support to end-user

- Manage and process of warranty claims, demo/standby unit loan, spare part cannibalization, with system and paperwork.

- Installation and configuration of hardware and software products.

2. Pre-sales Support :

- Support sales activity as technical expertise.

- Assist sales team, partner or customer to win and deliver deals.

- Demonstration of hardware and software product.

- Assist in integration of own products with 3rd party solution.

- Training and enable partner on pre-sales technical capabilities.

- slight experience in programming will be advantage.

- Occasional overseas travel is required.

(Average 1 trip per quarter. Mainly to ASEAN, South Asia countries, or Japan)

We appreciate all applicants for their interest in this opportunity. However, only those shortlisted for interview will be contacted.

• Design, deploy, and manage containerized applications and infrastructure to ensure reliability and scalability across development, staging, and production.
• Oversee and configure cloud resources, including compute, storage, networking, and security, to support multi-cloud infrastructure.
• Streamline build, test, and deployment processes to support continuous integration and delivery across multiple environments.
• Enforce security best practices across cloud, CI/CD, and virtualized environments to safeguard applications and data.

Requirements:

• Degree in Computer Science or equivalent.
• Cloud certified
• At least 3 years of relevant working experience
• Proficient in Python or other programming languages for automation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description:

• Ensure the smooth operation of MES software and its integration with ERP systems
• Identifying opportunities for process improvement and optimisation
• Monitoring, supporting, and ensuring maintenance and documentation of the MES model in terms of products, routes, operations, equipment, recipes, and lot movements
• Participating in MES-related projects, including project planning, resource allocation, and progress tracking, to ensure successful project delivery within scope, budget, and timeline constraints
• Assist in the planning, implementation and administration of M365 services such as MS Power Automate, PowerBI, SharePoint Online, Teams, Intune, OneDrive and other components
• Support in the conception and implementation up to the introduction of the projects in all phases for a sustainable operation, including Cloud projects
• Further development of our Digital Workplace vision
• Any ad hoc duties assigned by supervisor/manager

Job Requirements:

• Min Bachelor/Diploma in IT with extensive hands-on experience in the area Automation and MES implementation
• Minimum 3 years hands on with MES software platforms implementation and support

Interested candidates do attach your resume to [email protected]

Attn: Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd (99C4599)

• World-Class consultancy firm
• Design project experience

RESPONSIBILITIES:

• Responsible for Electrical Engineering services for the projects from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as mentor to new employees and provide technical assistance
• Advise engineers on the project administration and contractual issues
• Conduct technical discussion on common design problems
• Assist in maintaining high quality standards of design and construction
• To promote esprit de corps amongst employees
• Responsible to participate and support the Company’s SHEQ within their scope of duties

REQUIREMENTS

• Bachelor’s Degree in Mechanical or Electrical Engineering.
• Accumulated around 6 years of experience handling M&E Engineering ideally in semiconductor or construction projects

OTHER INFORMATION:

• Location: depending on Project
• Working hours: 5.5 Days
• Salary: To be Discussed based on experience (Salary will commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

How To Apply:

This position is an excellent opportunity for a dynamic individual. It comes with stimulating challenges that will mould your capabilities and reveal your potential.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: (R1875905), Achieve Career Consultant Pte Ltd EA Licence No. 05C3451) (BEP) by clicking the ‘Apply link’ /

or call your friendly Consultant, David, at 9271 7510 for a confidential discussion.

Please indicate the below information in your resume:

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We would like to inform that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at https://www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Role Summary:

Develop Java applications for Calypso v14+, support production release roadmaps, and troubleshoot issues. Requires expertise in Java, PL/SQL, Linux, and experience with Calypso v13+. AGILE methodology experience is essential.

Responsibilities:

• Develop in Java for Calypso v14+.
• Support the release roadmap in production.
• Troubleshoot and fix issues.

Qualifications:

• Excellent understanding of Java, PL/SQL, and Linux.
• Experience with Calypso versions higher than v13.
• Proven track record in AGILE methodologies.

Job Description:-

1. Responsible for all aspects of drafting electrical and structural drawing of switchboard & control panels for marine and industrial use, incorporating the company's key circuit breaker products.

2. Based on abundant practical experience and extensive knowledge on circuit breakers, produce high class switchboard and control panels drawing according to company’s standard.

3. Manage and lead the project for timely and accurate production of software engineering, electrical drawing and structural drawing.

4. Based on software management skill and rich experience of programming language and software development tools, construct software for control system.

5. By communicating closely with the clients both in Singapore and Japan, responsible for accurately understanding their needs and make sure that the products delivered are perfectly designed to meet their demand.

6. During the periodic inspection of products after delivery, responsible for supervising the on-site inspection to ensure that it is carried out correctly.

7. Take the lead of investigation to solve the issue rapidly in case of any software or system issues, by closely liaising with HQ in Japan.

8. Based on the extensive knowledge of switchboard, circuit breakers and software for railway, marine, cogeneration system, power plant and biomass plant projects, liaise closely with engineers’ team in Japan HQ and clients in Singapore to ensure solutions.

Job Requirement:-

1. More than ten (10) years of experience as software and electrical design engineer in electric power system industry.

2. More than ten (10) years of experience in drawing electrical circuit and outline drawing of switchboard using AUTOCAD.

3. More than five (5) years of experience in using software programming tools for power management system in industrial cogeneration system, specifically with PLC (Omron, Fuji, Mitsubishi, Schneider product etc.).

4. More than five (5) years of experience in communicating with clients as software and/or electrical design engineer, explaining technical details to clients in an easy-to-understand manner.

5. Understand “TERASAKI” products that include circuit breaker, marine and industrial switchboard.

6. Certified as a power generation equipment specialist or equivalent and more than five (5) years of practical experience in power generation of switchboard & control products.

Skills Required:-

・Problem-solving skills in challenging and complex situations

・Project management skills from concept, prototype to implementation

・Excellent communication skill to explain technical matters to clients

・Conversant with Autocad, Software for PLC (Omron, Fuji, Mitsubishi, Schneider product).

・Certificate of 1st grade Electrical drafting specialist or equivalent

・Certificate of power generation equipment specialist

Job responsibilty:

1. Conduct Site visit to evaluate & assess site for Solar PV system according to client needs. Design and implement the solar system.

2. Ensure compliance with industry standards and regulations.

3. Prepare Solar PV System quotation for clients.

4. Collaborate with project teams on site for successful installations.

5. Provide technical support and troubleshooting.

Job requirements:

1. Min 1 year and above in Solar/PV/Renewable Energy industry

2. Successful Candidates must self-motivated and display passion for renewable energy adoption, along with good communication and presentation skills.

3. Working hour: Mon-Fri 8am -5pm.

Be part of a renowned M&E company

• Usually 5-day work week (9.00am to 6pm)
• Up to S$5,000
• Good corporate culture with long history

Responsibilities

• Lead and manage the fire protection team (consisting of 1 Assistant Engineer, 3 Technical Officers & 4 workers)
• Develop and implement fire protection strategies, standards, and policies in line with industry regulations.
• Create fire protection plans by working closely with other departments and contractors
• Design and execute fire safety training programs for facility staff and workers.
• Conduct regular inspections and testing to ensure compliance.
• Stay abreast of developments in fire protection systems, codes, and standards. Ensure the team remains updated on best practices.
• Liaise with regulatory bodies, fire departments, and other stakeholders to guarantee compliance with codes and regulations.
• Provide technical support to project teams, contractors, and other stakeholders as needed.
• Oversee the installation, repair, and maintenance of fire protection systems & also to ensure all fire protection systems are in good working condition
• Develop and monitor budgets, providing regular reports to the Director of Facilities Management.
• Maintain accurate documentation of projects
• Liaise with and coordinate with the clients.
• Attend meetings when required.

Job Requirements:

• Bachelor’s Degree or Diploma in Facilities, Mechanical Engineering, or equivalent.
• Preferably with a minimum of 3 or 5 years of experience in fire protection or facilities management, with a focus on fire protection.
• Strong knowledge of fire protection systems, principles, codes, and standards is advantageous.
• Experience in managing and leading a team of engineers and technicians.
• Excellent communication skills, with the ability to communicate technical information to non-technical stakeholders.
• Strong problem-solving skills, with the ability to identify and develop creative solutions.
• Having LTA /Tunnel experiences will be an added advantage

Job Description

• Industry/ Organization Type: Manufacturing – Fabrication
• Position Title: Sales Engineer /Assistant Sales Engineer
• Working Location: Tuas, 5 min from MRT
• Working Hours: Monday - Friday (8:30 AM-5:30 PM)
• Salary Package: Up to $4500 (Basic) + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Achieve growth and sales targets.
• Build and maintain customer relationships.
• Understand and manage customer needs.
• Communicate customer’s requirements effectively to internal team.
• Prepare and present quotations.
• Lead and support operations team for customer’s prototype/sample build to mass production.
• Order entry, planning and monitoring of delivery schedule and commitments to customers.
• Collaborate with raw material suppliers.
• Plan sales and materials based on customer forecasts.
• Participate in monthly stock takes to optimize inventory turnover.
• Other ad-hoc duties that may be assigned.

APPLY NOW!!!

• Background in Engineering, Manufacturing, or a relevant technical field.
• Experience in engineering sales/customer service is a plus.
• Strong marketing and business skills.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67170 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Sales Engineer
• Working Location: Tuas West
• Working Hours: Monday – Friday, 9am – 5.30pm (One Saturday per month, 9am – 12pm)
• Salary Package: Up to $4,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Identify and develop new business opportunities by expanding the customer base.
• Prepare detailed sales reports, monitor project progress
• Act as the primary point of contact between various suppliers and customers to meet project and sales objectives.
• Contribute to achieving the company’s overall sales and marketing goals by aligning with the strategic plans.
• Manage any additional tasks assigned.

APPLY NOW!!!

• Degree in Mechanical, Electrical, or related Engineering fields.
• Willingness to travel across various Asian countries for sales promotions and client meetings.
• Proficiency in Microsoft Word, Excel, and PowerPoint.
• Inexperienced candidates are welcome to apply as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70294 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: IT/Telecommunications
• Position Title: Project Engineer
• Working Location: Macpherson
• Working Hours: 5 working days (Mon to Fri 8.30AM – 5.30PM)
• Salary Package: Basic Salary up to $3,500 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Responsible for managing the overall direction, coordination, implementation, execution, control and completion of structured cabling projects
• Monitor the day-to-day activities in the field, managing the flow of information, and reporting and tracking issues arising from progress, quality and safety
• Assist in completing the handover plan, ensuring documentation is completed and expectations are met on time and with quality
• Identify issues proactively and work with the team to resolve effectively
• Maintain and develop strong relationship with customers with direct interaction with focus on improving customers’ perception of service, quality, on time delivery, responsiveness, and problem solving.
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Diploma/Degree in Engineering or any relevant discipline
• Has 1 year of experience with fibre optics or relevant products in the industry
• Prior experience with Structured Cabling/ELV is an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71056 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing/ Chemical
• Position Title: Project Coordinator/ Project Engineer
• Working Location: Tuas
• Working Hours: Mon – Fri, 8.30 AM – 5.30 PM
• Salary Package: Up to $4,100 + AWS + Bonus (Up to 4 months)
• Duration: Permanent

Key Responsibilities

• Monitor project activities.
• Report to the Section Manager/ Department Manager.
• Maintain and control project site and safety.
• Verify project deliverables with site documents.
• Report site/ safety deviations or issues on projects to the Section Manager.
• Attend/ Conduct toolbox meetings.
• Report and assist the Section Manager/ Engineer in project deliverables.
• Participate in department EHS activities.
• Assist with maintenance activities.
• Prepare Purchase Requisition and update cost summaries as required.
• Maintain project document filing and organize documents.

APPLY NOW!!!

• At least a Diploma and above.
• Minimum 1 year of related working experience or knowledge in the Project Site of the chemical industry.
• Proficient with Microsoft Office.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67897 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Production (Manufacturing)
• Position Title: Production Engineer / Executive
• Working Location: West Region
• Working Hours: Monday – Friday, 7.30 am – 5 pm
• Salary Package: Up to $4,000 + AWS + VB
• Duration: Permanent

Key Responsibilities

• Organize, monitor, and ensure manufacturing processes run efficiently with minimal costs using manpower, equipment, facilities, materials, and capital wisely.
• Start, implement, and manage process improvement programs based on best practices in the metal drum industry, focusing on productivity and product quality.
• Ensure all manufacturing processes comply with all regulatory and statutory requirements.
• Collaborate with the HR department to address employee grievances promptly.
• Conduct employee performance reviews to gauge the competency, knowledge, and contribution of maintenance technicians and engineering staff.
• Maintain work safety practices and continually enhance safety records by addressing physical safety issues and employee safety attitudes.
• Keep all areas clean and organized.
• Evaluate, train, and maintain individual skills to stay updated with the best engineering management practices.
• Ensure timely submission of overtime records to the HR department for monthly salary calculations.
• Establish and prepare process documentation, such as work instructions, process specifications, and assist with the quality plan.
• Prepare reports, analyse data, and make recommendations to improve plant operations and solve production issues.
• Ensure subordinates are trained, equipped, and motivated to accomplish the maintenance program safely, timely, and cost-effectively.
• Communicate regularly with all production and maintenance teams to ensure good two-way communication about production and maintenance issues.
• Assist in hiring production personnel.
• Maintain and update operating manuals for all manufacturing equipment and processes.
• Perform any other projects or tasks assigned by the HOD/Management.

APPLY NOW!!!

• Diploma or Degree in Manufacturing, Electrical, Mechanical, or Engineering discipline.
• Minimum 5 years of experience in a manufacturing environment.
• Ability to supervise and lead subordinates.
• Willingness to work after hours or on non-working days.
• Ability to work under pressure.
• Computer literate.
• Knowledge of ISO standards is a plus.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69178 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets