Project Design & Engineering Calculations and Proposal drawings to Client.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as Equipment sample or Site measurement studies

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Schedule the project in logical steps and budget time required to meet deadlines.

Site & office project management and daily operations including Engineering Design, Drawing and Fabrication, inspections, site measurements and handover to client’s.

Attend Site meeting, Equipment rectification in assembly and dismantling when required.

Overall project planning, scheduling, monitoring, and updating to meet project completion targets.

Liaison and meeting with client's representatives, relevant authorities, and consultants.

Site co-ordination, monitoring and report work progress.

Flair in design; able to sketch fast and produce good design concept

Coordinate all new and current on-going projects and able to communicate well with all levels

Review M&E Design Drawings and ensure compliance with design specifications and guidelines. Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Review incoming engineering, ISO piping drawings and assess impact of extra work or changes on schedule.

Ensure all regulatory and statutory requirements regarding testing and record keeping are met.

Supervise and coordinate M&E and Mechanical piping/equipment installation in accordance with approved drawings and materials. Coordinate M&E details with Clients, Consultants, Sub-contractors and other site staffs.

Monitor performance of multi-skilled craft workers in the installation, removal, or adjustment of equipment or components in accordance with established project procedures, requirements and specifications.

Monitor construction schedules, methods, manning charts, materials and equipment requirements.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Supervise electrical and instrumentation construction work as per IFC drawings.

Monitor construction schedules, methods, manning charts, material and equipment requirements.

Monitor the activities of contractors and subcontractors performing craftwork, ensuring compliance with project quality, safety, and security requirements.

Min 5-7 years’ of experience in Engineering related activities in Mfg, Recycle, Oil & Gas and Chemical plant industry.

Responsible for safety of supervised personnel; ensures that craft personnel comply with established safety policies and procedures, and that they practice safe work habits.

Applicable only for Singaporeans / PR's

Job Responsible:

• To receive the work order from Assistant Purchasing Manager to carry out jobs by the requirement of the order.
• To clarify with customers via Marketing department enquiries or item descriptions that are unclear
• To submit quotation worksheet to assistant purchasing manager within the time frame as stated on work order for approval and make the necessary amendments
• To ensure the timely delivery of stores of confirmed orders by supplier.
• To provide Picking list, Stock chit, and coordinate with Operations Department on delivery time.
• To ensure that all relevant documents (i.e. Certificate, D.O) are in order for delivery
• To hand over signed delivery orders to Accounts department.
• Coordinate return of stores to supplier, submit Goods Return Note (if any) and collection of Credit note.
• To update system and post the necessary documents after completion of order

Job Requirements:

• Min Degree Holder
• Min 3 years of relevant experience in relevant industry
• Negotiation skills with suppliers and principals.
• Knowledge in MS Office, SQL software

Project Design & Engineering Calculations and Proposal drawings to Client Management.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as per Equipment sample or Site measurement studies

Analyse sub-contractor proposals, design and calculation feasibility study.

Coordinate with Government and various agencies.

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Manpower planning, deployment and control and on-time schedule.

Coordinate to resolve engineering and construction issues and manage the schedule.

Safety mindset and ability to develop RA and permit to work application.

Maintain proper project documentation and ensure accuracy of all design submissions to comply with project specifications and clients’ requirements.

Monitoring of site activities, material requisition, cost control, project supervision and schedule of works

Ensure that works are executed within an acceptable standard of workmanship and in line with safety procedures

Understand and ensure compliance in project requirement and scope of work

Issuing of material requisition form, assist in purchasing materials/items required by production/customers, prepare marketing material & etc.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Any adhoc duties as assigned by management.

Min 3-5 years’ of experience in Engineering mfg, Recycling, Oil & Gas and Chemical plant industry.

Applicable for Only Singaporeans & PR's.

Responsibilities:

*Access power and instrument control signals for production equipment.

*work on the line from the substation to the process equipment,

*installation and commissioning of transformers and switchgear, the construction of cable lines, and the power supply and commissioning of equipment;

*work on the bus path from the instrument central control room (CCR) to the equipment including the installation and commissioning of control cabinets,

* installation of cable paths, the power supply of process equipment, and process interlocking commissioning

*· Manage construction activities and progress independently.

Requirements

*· Able to complete above responsibilities indepandently.

*· Degree in Electrical engineering or diploma holder with minimum 5 years of relevant experience.

*· Technically competent across the full range of electrical systems

*· Good interpersonal and communication skills to interact with all level of staff.

• Assist Project Manager in the coordination work and any other work in relation to the project.
• Prepare CAD drawing (cutting list, as-built drawing), Work Orders.
• Knowledge on rendering, 3D drawing will be advantageous.
• Cross check the material quality prior to production team's fabrication.
• Work with production team to ensure the production output are in line with the project schedule.
• Team player as well as able to work independently
• Able to work in a fast paced environment
• Meticulous and resourceful.

Job Purpose

The Project Coordinator shall assists Project Manager in oversees the planning, implementation, execute, monitor and track projects from beginning till end with specified deliverables.

The role of the Project Coordinator will be able to learn and equip with a full suite of comprehensive exposure and knowledge on Project management that covers proposal, product sourcing, timeline management, cost and resource control and quality management.

Primary Duties and Responsibilitie

The Project Coordinator shall assists Project Manager performs a comprehensive range of duties including some or all of the following:

Job Requirement:

• Coordination work, planning and monitoring site's workforce and multi-disciplinary works from inception to completion, inclusive of project documentation, plans and reports etc.
• To ensure that the project runs smoothly by tracking project progress, and effectively and accurately communicate relevant project information to the client, Management, and Project Team.
• To ensure all project requirements are within the standards & control of the project management plan.
• Able to multi-task and manage several things at one time.
• Able to handle stress/pressure and work hard with tight deadlines.
• Any other works as assigned by superior.

Requirement:

• Only Singaporean to apply.
• ITE Level. Preferably in Electrical and or Mechanical or Manufacturing.
• Fresh grads or 1 year working experience may apply.
• Working hours – 0830 to 1730hrs Monday to Friday.

Summary:

• Basic up to $4000 + Transport Allowance $300 (Without Own Transport) / $800 (With Own Car) + Commission + AWS + VB
• Full time position
• 5 working days
• Changi

Responsibilities:

• Identify and engage potential clients through lead generation and networking.
• Present services, negotiate contracts, and close deals to secure new business.
• Build and maintain strong relationships with existing clients, addressing inquiries and concerns.
• Stay informed about industry trends, market conditions, and competitors.
• Develop strategies for expanding market presence and entering new regions or industries.
• Create and deliver sales presentations, proposals, and competitive quotations.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at www.rkgroup.sg

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

• Assist the project manager in the development of project management documents such as project budgets, project schedules, scope statements and project plans
• Execute project management administrative and bookkeeping tasks such as managing invoices, purchase orders and inventory reports, among other financial documents
• Supervise the project procurement process
• Meeting with project clients to assess their needs and define project requirements, acceptance criteria and project timelines
• Coordinate the allocation of project resources to ensure the project team has what’s needed at the right time
• Assign tasks to team members and help them understand what’s expected from them in terms of project milestones and deliverables
• Be the liaison between the project team and project clients throughout the project life cycle
• Help project managers monitor project progress and team members’ performance and provide updates to project stakeholders
• Schedule stakeholder meetings, document and generate reports
• Foster cross-team collaboration to help project team members complete project tasks and produce deliverables

Ensure that all works carried out are of highest quality standard to meet customer satisfaction.

Execute the site testing and commissioning activities of the company to the satisfaction of the owners and builders

Liaise with Yard’s commissioning personnel to close out issues which will affect the smooth completion of project

Ensure that Punch List are corrected and Test Memo and Service Acknowledgement Report are signed

Ensure that site issues are highlighted to the Production Manager/Assistant Production Manager in order to come up with proper and timely solution

Inform the project engineers in the event of changes on design, drawings and system operation which may arise during the job execution.

Highlight to Project Engineers any changes that may be required on supplied equipment for quality improvement

Ensure that the equipment used for commissioning are calibrated and maintained in good working condition to achieve quality standard.

Ensure non-conformity report is being raised as and when necessary.

Ensure that non-conformances are promptly resolved by means of investigation and corrective action.

Working Hours

Mondays - Fridays

8.30am - 5.30pm

Work Location

Seng Kang Train Depot

(Might be required to report to office at Tuas area for meeting)

Job Purpose

The Project Coordinator (Site) shall assist and support the Senior Manager in coordinating and monitoring and arranging the site projects on-going, communicating between the office, workers, subcontractors and clients on site. Provide timely updates and suggestions to Senior Manager for timely implementations to ensure work efficiency.

Job Responsibilities

• Arrange and task ground staff with instruction from Office to support site executions on projects.
• Control and Maintains project schedules by monitoring project progress; coordinating activities; resolving problems in specific to manpower and materials / tools needed.
• Support in sourcing project material, tools, and equipment to support the start and during the course of the projects.
• Account and maintain the inventory of material, tools, and equipment of the projects before/during/after.
• Maintains safe and clean working environment by enforcing procedures, rules, and regulations.
• Acts as safety ground coordinator to ensure safety awareness and maintenance of the ground staff.
• Any other ad-hoc duties assigned from time to time.

Requirements

• Only Singaporean to apply.
• With own transportation will be preferred.
• Candidate shall possess at minimal “O" – Level or NITEC Qualification or equivalence education qualification.
• Candidates with no relevant experience is welcome to apply. Candidate with working experiences to similar work nature will be preferred.
• Shall be fluent in English and Chinese Language, both written and spoken, to communicate with our internal and external stakeholders.
• Shall have mind-set on people-oriented, administrative skills, dateline-driven, a team player, and have a positive attitude.

• Develop and implement operational policies and procedures for efficient operations.
• Enhance systems, processes, and best practices.
• Manage day-to-day operations, overseeing the operations team and department.
• Ensure organizational processes comply with legal regulations and standards.
• Uphold health and safety guidelines and enforce compliance.
• Monitor employee and team performance, offering coaching, training, and feedback for improvement.
• Handle budgets, forecasting, and resource allocation to meet strategic goals.
• Collaborate cross-departmentally to align operations with organizational objectives.
• Cultivate and maintain relationships with vendors and suppliers.
• Negotiate contracts for favorable pricing with suppliers and vendors.
• Optimize business travel processes, secure corporate rates, automate expense reports, and ensure compliance.
• Implement quality assurance measures for products/services and monitor production KPIs.
• Enhance customer service quality and satisfaction.
• Analyze data to identify process improvement opportunities and cost savings.
• Manage supply chain processes, including inventory, production, sales, and sourcing.
• Optimize workflows and processes for efficiency and cost-effectiveness.

· Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

· Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.

· Interacting with clients, interpreting their needs and requirements, and representing them in the field.

· Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

· Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

· Reviewing the engineering tasks and initiating the necessary corrective actions.

· Developing specifications for the project's needed equipment.

· Creating frameworks to measure the project's metrics and data collection.

· Establishing field test methods and methods for monitoring the quality of those tests.

· Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

· A Bachelor's degree in engineering or a related field.

· 3 or more years' field and project planning experience.

· Excellent computer literacy and knowledge of design and visualization software.

· The ability to work with multiple discipline projects.

· Excellent project management and supervision skills.

· Excellent organizational, time management, leadership, and decision-making skills.

· Strong written and verbal communication skills.

· Knowledge of applicable codes, policies, standards, and best practices.

JOB DESCRIPTION

1. Responsible for overall project progress and ensure project is complete within the specific time, within budget and meet client’s requirement;
2. Liaise with design team on engineering and design issues;
3. Responsible for planning and deployment of resources such as manpower, machinery, equipment and material;
4. Resolve any disputes/clarifications during the execution of project;
5. Ensures settlement of project final accounts at the end of the contract;
6. Prepares and attends project budget presentation and review;
7. Prepares audit reports;
8. Chairs Safety and Health coordination meetings.

REQUIREMENT

1. Diploma in Mechanical Engineering or Equivalent Certificate;

2. At least 3 years of relevant experience in the Marine Industry;

3. Good office coordination skill and interpersonal skill;

4. Independent and resourceful;

5. Good communication skill;

6. Able to handle pressure;

7. Preferably able to understand and read Mandarin.

Working Hours

Mondays - Fridays

8.30am - 5.30pm

Work Location

Seng Kang Train Depot

(Might be required to report to office at Tuas area for meeting)

Job Purpose

The Project Coordinator (Site) shall assist and support the Senior Manager in coordinating and monitoring and arranging the site projects on-going, communicating between the office, workers, subcontractors and clients on site. Provide timely updates and suggestions to Senior Manager for timely implementations to ensure work efficiency.

Job Responsibilities

· Arrange and task ground staff with instruction from Office to support site executions on projects.

· Control and Maintains project schedules by monitoring project progress; coordinating activities; resolving problems in specific to manpower and materials / tools needed.

· Support in sourcing project material, tools, and equipment to support the start and during the course of the projects.

· Account and maintain the inventory of material, tools, and equipment of the projects before/during/after.

· Maintains safe and clean working environment by enforcing procedures, rules, and regulations.

· Acts as safety ground coordinator to ensure safety awareness and maintenance of the ground staff.

· Any other ad-hoc duties assigned from time to time.

Requirements

· Only Singaporean to apply.

· With own transportation will be preferred.

· Candidate shall possess at minimal “O" – Level or NITEC Qualification or equivalence education qualification.

· Candidates with no relevant experience is welcome to apply. Candidate with working experiences to similar work nature will be preferred.

· Shall be fluent in English and Chinese Language, both written and spoken, to communicate with our internal and external stakeholders.

· Shall have mind-set on people-oriented, administrative skills, dateline-driven, a team player, and have a positive attitude.

Responsibilities

• Configure and manage infrastructure systems, applications, and network equipment (e.g., Active Directory, data centers, firewalls, VPN, video conferencing).
• Oversee desktops, mobile, and remote devices.
• Ensure automated backups, disaster recovery processes, and system patches, with close monitoring of resource usage.
• Work with external vendors to uphold SLAs.
• Develop and update technical documentation (admin and user guides).
• Support local and international users over LAN/WAN securely.
• Identify suitable products, solutions, and suppliers for project needs.
• Provide L1/L2 support and participate in projects as a lead or team member.

Requirements:

• Diploma/Degree in Computer Science, IT, or CCNA Certification.
• At least 1 year of relevant experience.
• Proficient in enterprise networking (WAN, LAN, VPN optimization).
• Skilled in Microsoft Server (2012+), Microsoft 365, Google Suite.
• Knowledgeable in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall).
• Familiar with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless AP Controller.
• Strong understanding of CyberRisk and CyberSecurity; PDPA familiarity preferred.
• Experience with Veeam, VMware, and UNIX/Linux is beneficial.
• Background in API/Web Programming and Database Administration is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead line leaders and operators to achieve daily production targets, quality, productivity, and yield.
• Conduct daily pass-down meetings and escalate any line issues.
• Manage manpower, overtime, and consumables planning.
• Ensure adherence to manufacturing and safety procedures.
• Train and coach leaders and operators to enhance performance.
• Implement improvements to minimize human errors.
• Maintain discipline and good housekeeping in the production line.
• Collaborate with departments on projects, evaluations, and preventive maintenance in the fab.

Requirements:

• Diploma and above in Engineering or equivalents.
• Minimum 2 years of working experience in a related industry.
• Experience in high-tech, high-volume manufacturing environment is preferred.
• Strong leadership and communication skills.
• Willing to work 12-hour shifts (permanent day or night, as assigned).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Requirements:

• Coordinate with respective parties to prioritize production, control WIP, and ensure output meets targets, including managing equipment downtime to fulfill shipment needs.
• Plan ingot growing schedules aligned with customer demand and puller capacity.
• Collaborate with technology teams to enhance ingot-growing processes.
• Organize and oversee ingot deliveries to global locations.
• Adapt plans to accommodate changes in specification requirements.
• Evaluate and decide on the utilization of aging inventory.
• Plan and optimize test ingot usage effectively.
• Oversee the use of CZ tools to support process development.

Responsibilities:

• Bachelor's degree in Engineering or equivalent.
• A minimum of 2 years of working experience in the semiconductor manufacturing or high-end manufacturing engineering industry is required.
• Familiarity with logistics processes and systems, such as Workstream, SAP, and reporting tools.
• Advanced proficiency in PC skills.
• Strong skills in Microsoft Excel, with Visual Basic knowledge being a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Prepare and cook a diverse range of dishes, such as breakfast options, sandwiches, salads, soups, pastries, and other cafe favorites.
• Ensure the quality and flavor of food consistently meet or exceed customer expectations.
• Develop creative and enticing menus tailored to a variety of customer tastes and dietary needs.
• Maintain detailed food inventory records, monitor stock levels, and plan ingredient requirements in advance.
• Follow proper culinary techniques, food safety protocols, and health regulations.

Requirements:

• Demonstrated experience as a Chef in a cafe or comparable food service setting.
• Extensive understanding of cooking methods, menu development, and food preparation.
• Skilled in designing and implementing innovative and attractive menus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Primarily deal with non-or minimally-invasive procedures.

Requirements:

• Must possessed MBBS certification.
• Have at least 5 years of experience as aesthetic doctor.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Execute service and maintenance workflows efficiently.
• Coordinate with client representatives on all service/maintenance matters.
• Assist the supervisor in organizing teams for service tasks and delegating responsibilities.
• Manage daily client interactions, ensuring their expectations are met.
• Support the supervisor in troubleshooting and timely completion of security system services.
• Understand each client's business to ensure high customer satisfaction.
• Ensure all work complies with Workplace Safety and Health Act regulations.

Requirements:

• Minimum Nitec in Electrical/Electronic Engineering.
• At least 2 years of working experience in related field.
• Requires knowledge and practical experience with security systems (e.g., Integrated Security Management, Card Access Control, Intrusion Detection, and CCTV systems).
• IT/Network/Server knowledge is a plus.
• Transport allowance provided.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Reporting to the Team Manager, the Customer Service Executive is responsible to formulate resolution and respond in a timely and accurate manner and providing excellent customer service to callers.

Job Requirements:

• Required to work 5 days work week including weekends and public holidays. Rotating shift.
• Required to work in shift and shift allowance will be provided accordingly.
• Adequate telephone skills and proper etiquette.
• Able to work in a fast-paced environment due to high volume of inquiries.
• Have experience in working contact center industry will be an added advantage.
• No working experience is welcome to apply as on-the-job training will be provided.

Working Location:

• Woodlands North Coast (Next to Republic Poly)

Responsibilities:

• Lead line leaders and operators to achieve daily production targets, quality, productivity, and yield.
• Conduct daily pass-down meetings and escalate any line issues.
• Manage manpower, overtime, and consumables planning.
• Ensure adherence to manufacturing and safety procedures.
• Train and coach leaders and operators to enhance performance.
• Implement improvements to minimize human errors.
• Maintain discipline and good housekeeping in the production line.
• Collaborate with departments on projects, evaluations, and preventive maintenance in the fab.

Requirements:

• Diploma and above in Engineering or equivalents.
• Minimum 2 years of working experience in a related industry.
• Experience in high-tech, high-volume manufacturing environment is preferred.
• Strong leadership and communication skills.
• Willing to work 12-hour shifts (permanent day or night, as assigned).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage internal and external excursions (MRB or Quality Claims).
• Oversee customer data reporting.
• Conduct quality-related training sessions.
• Support customer surveys and audits.
• Lead continuous improvement activities.
• Perform other ad hoc duties as assigned.

Requirements:

• Degree in Engineering or equivalent.
• Preferably knowledgeable in Statistical Process Control (SPC) and statistical techniques.
• Auditing experience is a plus.
• Understanding of system flow and databases is an added advantage.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628