School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research.

With over 3,000 undergraduates students and 1,000 graduate students it is one of the largest EEE schools in the world and ranks 10th in the field of Electrical & Electronic Engineering in the 2024 QS World University Rankings by Subjects.

Today, the School has become one of the world’s largest engineering schools that nurtures competent engineers and researchers. Each year, the School graduates over a thousand students who are ready to take on great ambitions and challenges.

For more details, please view: https://www.ntu.edu.sg/eee

We are seeking a motivated and skilled Project Officer to contribute to the design and simulation of high-efficiency DC-DC converters and RF power amplifiers.

This role involves working on innovative solutions in the field of analog/RF/power management IC.

Key Responsibilities:

• Development of teaching materials for IC design
• Design, implementation and testing of DC DC converters and other related analog/mixed signal ICs. Development cycle including circuit design, simulation, modeling, layout, verification and measurements.
• Design state of the art DC DC converters that include op amps, comparators, bandgap, low-drop linear regulator, ADCs, switching power stage, etc
• Design of high power-efficiency RF power amplifiers
• Prepare research papers/reports/technology disclosures, etc

Job Requirements:

• Bachelor’s degree in IC design or related field.
• At least 2 years of relevant experiences in IC design/Electronics.
• Familiarity with Analog/Power Management/RF IC design and Cadence software.
• Good written and oral communication skills.
• Proficiency in Cadence, Python or Matlab.
• Ability to work independently and deliver solutions within strict timelines.
• Attention to detail, with excellent organizational and time management skills.
• Entry level candidates are welcome to apply.

We regret to inform that only shortlisted candidates will be notified.

Education required: Degree in IT, Engineering related discipline preferred

Other requirements: Business Analytics and Microsoft Power Platforms knowledge preferred

Language requirement: Written and spoken fluency in English

Application deadline: We will close this vacancy when we have enough applications, so please apply as soon as you can so your application can be considered.

Looking to gain valuable real world work experience and help positively impact the health of billions of people? Apply for a GSK Traineeship today!

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

A certificate will be given to successful trainees upon completion of the programme.

What will you do?

• Responsible for the creation and maintenance of SAP master data, mainly, Material Master, BOM, Master Recipe and Production Version based on input from Local Business Owners of various functions
• Participate in relevant SAP Master Data Forum
• Identify continuous improvement/best practices opportunities
• Assist Business Process Manager in providing site SAP system related support, including:
  Identify, propose and implement improvements to SAP
  Provide SAP system support
  Manage SAP system change (e.g. change request, testing, training)
  Support projects when needed with both local and global teams
• Work in collaboration with Quality Assurance to establish and maintain high standards of cGMP for site SAP activities in compliance with GSK and regulatory standards
  Ensure inspection readiness at all times
  Support regulatory audits/inspections
• Comply with appropriate safety regulations and policies

What will you learn?

• Experience development opportunities, including instructor led training, that will equip you to become a SAP specialist and with business process knowledge
• You will gain in-depth knowledge of SAP production master data and the creation and maintenance of it in SAP
• Develop knowledge of SAP and an understanding of inter-dependencies among the various SAP modules to manage the cause and effects
• You will gain insight into GxP compliance in a Pharmaceutical Industry

What are we looking for?

• Some knowledge of SAP master data and SAP modules in manufacturing industry
• Sense of urgency, flexibility and accountability
• Analytical, attention to details and team player
• Proactive and results oriented to continuously develop and improve process

What do we offer you?

• Understand and experience the GSK Culture
• Work with a diversified team of professionals
• Implement technical knowledge and skills that you have acquired at school
• Apply and develop soft skills such as interpersonal, communications and negotiation skills
• Transport to and from site to MRT stations in centralised locations all across Singapore (only for manufacturing sites)

The person will be responsible for

1) Prepare & compile Monthly Progress Claim for all the projects;

2) Prepare & submit Variation Order for all projects where applicable;

3) Quantity Take-off;

4) Assist in monitoring & compilation of all ISO 9001, ISO14001 & ISO45001 documentation for Audit & BCA Accreditation;

5) Any others relevant task that maybe assign from time to time

Qualifications : Diploma in related field;

Experience : Fresh or 2 years relevant experience will be added advantage;

Job Responsibilities:

• Work closely with project sponsors, stakeholders, and team members to ensure that all project requirements, deadlines, and schedules are on track.
• Documentation management and ability to use project management tools.
• Taking meeting minutes.
• Assist in co-ordination of all project activities and submission as required.
• Keep proper records and maintain all administrative correspondences and documents relating to projects in good order.
• Preparing material submission, system technical data submission as per project requirements.
• To assist to generate to monitor project progress and schedules.
• Manage changes to the project scope, project schedule using appropriate verification techniques.
• Project planning and mangement.
• To advise best practice information management practices and documentation processes.

Job Requirements:

• Qualification: O level, A Level, ITE or equivalent
• Years of experience: At least 3 years of Project Management or equivalent experience in related field (Construction)
• Skills: Capable to converse in English, Mandarin or local dialect. Proficient in MS Office, MS Project and documentation. Good communication and interpersonal skills. Capable of maintaining strong relationships. Attention to details under pressure and time management skills with the ability to meet deadlines.

Addcel are looking for Senior Project Engineer who has experience in Project Implementation for Mechanical works especially Piping, Structural Steel and Tankage works. Follow through the whole project lifecycle from estimation, tendering, detail engineering to project management and implementation.

Responsibilities:

• Estimation and MTO
• Tendering & Proposal
• Value and Detailed Engineering
• Drafting using AutoCAD
• Project Planning, Documentation and Support
• Capture project progress and additional/ change orders
• Others as and when required by the management.

Requirement:

• Min. 2 - 5 years of relevant working experiences
• Min. Degree in engineering or equivalent
• Excellent skill in MS Office

Responsibilities:

• Lead full spectrum of Project Management including Overall Procurement, Construction, Manpower Planning, Testing and Commissioning.
• Involve work force arrangement for Plumbing, Sanitary , Gas and Precast yard services.
• Budget and Cost Control.
• Preparation of Progress Claims.
• Coordination and liaison with Clients, Consultants, Architect, Authorities, Project teams, Sub-contractors and Suppliers.
• Daily Operations for all the projects and maintenance.
• Prepare Agenda, Follow up agenda.
• Whole In Charge of Procurement, HR and Safety Department
• Able to prepare full set of Accounts and liaise with the Auditor.

Requirements

• Degree / Diploma.
• Min 5 years of relevant work experience in similar capacity in Plumbing & Sanitary Services.
• Highly motivated and possess strong leadership qualities and the ability to work independently in a challenging environment.
• Able to communicate effectively at all levels.
• Able to liaise with mandarin speaking sub contractors.
• 6 Days work

ABOUT THE NATIONAL INSTITUTE OF EDUCATION (NIE)

The National Institute of Education (NIE), Singapore, is Singapore’s national teacher education institute and we are proud to be an integral part of the nation’s education service. We play a key role in the preparation of teachers and in the provision of teacher professional and school leadership development programmes. We are committed to our vision of being An Institute of Distinction: Leading the Future of Education and our mission to Inspire Learning, Transform Teaching and Advance Research.

NIE invites suitable candidates to join the Corporate Planning & Development Office (CPDO) as a Senior/Assistant Manager, Corporate Planning and Development (3-year contract).

Job Description

• Liaise with NTU counterparts, such as the Office of Health and Safety, to implement and coordinate new initiatives and share and distribute information relating to workplace health and safety matters within NIE to meet NTU expectations.
• Formulate, implement, and evaluate new and existing health and safety policies and services to build a strong safety and health culture within the NIE community and ensure compliance with relevant regulations and NTU expectations.
• Facilitate Enterprise Risk Management programme, which includes reviewing & tracking the key risks identified in the risk register.
• Support assistant directors in the department in various corporate planning initiatives, such as crisis/incident management and Enterprise Risk Management, etc.
• Provide administrative/secretariat support for activities/committees/meetings by the department.

Requirements

• A University degree.
• At least three years of relevant experience in occupational workplace health and safety management, with practical knowledge and experience in implementing safety programs, conducting risk assessments, and ensuring compliance with local regulations.
• Strong experience in ISO documentation, including ISO 45001, would be preferred.
• Registered Workplace Safety and Health Officer (WSHO) would be advantageous.
• Proficient in Microsoft Office Applications and strong in Excel.
• Strong written and verbal communication skills and an eye for detail.
• Highly motivated individual who can multi-task and work independently.
• Ability to work well under pressure with different levels of people.

Closing Date: 9 January 2025

We regret that only shortlisted candidates will be notified.

Other Information

NIE staff can take chartered buses at their own expense from or near their home to the NIE campus. This is subject to the availability of seats.

Location: Ubi

Basic UP $3500 + Attractive Comissions

Job Responsibilities:

• Candidates will be trained to build, grow and serve customer accounts to achieve established sales targets and management objectives.
• Handling Sales Enquires, Generate Quotation, Product/Solution Presentation, Addressing Customers’ Requirements
• Customer Account Management
• Attend exhibition and Seminar participation
• Explore new markets/ industry and expand customer base.

Job Requirement:

• Nitec/ Diploma in Electronics/ Electrical/ Telecommunication/ Engineering related background
• Preference with 1 year of sales experience in similar industry

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

Perks of Interning at MCI Career Services

• Accessibility: 5 to 10 mins walk from Jurong East MRT
• Culture: We embrace highly driven talents who enjoys working in a fun,collaborative and innovative culture.
• Engagement & Celebrations: Birthday Celebration, Team Bonding, Dinner & Dance (D&D), Corporate Social Responsibility (CSR),Festive Celebrations etc.
• Leaves: Annual, Medical, Birthday, Festive Leaves etc
• Mentorship: Training would be provided by experienced recruitment consultant and you would have the opportunity to understand the hiring processes and recruitment landscape as well as interact with business clients.
• Accredited Testimonials & Potential Permanent Job Opportunity: Candidates may request for a testimonial after completing their internship if their performance meets acceptable standards and may be offered a full-time role upon graduation.
• Wellness: Comfortable massage chairs and therapeutic mini S.E.A aquarium for you to unwind and relax

What would you be exposed to ?

1. Business Opportunity Development:

• Conduct thorough market research to identify potential clients, markets, and growth opportunities for expansion and business development

2. Lead Generation & Client Acquisition:

• Cold calling to qualify prospects
• Partner closely with BD Team to strategically develop key accounts
• Conduct presentations, negotiations, and close deals with new and existing clients
• Build a pipeline of qualified prospects and track lead progress from initial contact through to conversion

3. Client Relationship Management:

• Understand client’s hiring needs and work closely with the BD team to deliver tailored solutions
• Cultivate and maintain long-term relationships with clients through site visits and calls to ensure high client satisfaction and retention
• Provide exceptional customer service to clients by addressing any concerns or issues that arise timely

4. Market Intelligence and Reporting:

• Provide regular reports and updates on business development activities and sales progress
• Maintain accurate records of client interactions, opportunities, and outcomes within CRM system

5. Collaboration with Talent Acquisition:

• Work closely with Talent Acquisition Team to ensure that the team understood the client’s hiring needs and expectations and shortlist suitable candidates for clients’ review

Requirements

• Diploma or Bachelor Degree, preferably in business-related fields. Candidates who have no experience but are interested in sales and business development are welcome to apply.
• Strong organizational, communication skills, attention to detail and willing to learn
• Candidates must be able to commit for at least 5 to 6 months of internship

Kindly send us a copy of your CV to [email protected] and indicate your period of commitment for the internship in your CV. If you do not possess the above experiences, your application will still be considered on individual merits and you may be contacted for other job opportunities.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified. **

Ong Jun Kiat

Registration Number: R23117387

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Roles & Responsibilities

1) Business Development & Coordination with Business Development Department

· Identify the potential end users and know more about their work requirements. Communicate with the End users and get REI involved in the proposals.

· Implementation of new proposals to the End user based on the work constructability.

· Discuss with BDD on the new implementation of works if any that has been executed on site. Provide the details of work scope to BDD on the jobs carried out and to be executed.

· Providing input to the Business Development Team at required intervals. Involved in the preparation of presentation with the strategy.

· Standardize the Project Working slides on the REI EPC skills in terms of REI Works and develop the standardization forms/ norms for the Standalone REI skills.

2) Proposal Preparation and Coordination with Proposal Team

· Evaluation of the provided ITB documents and accordingly strategize the RFQ and the price schedule. Arrange one dedicated guy from the project team on the preparation of workflow and strategy on the execution in along with the necessary competent personnel lists.

· Liaise with the End Users on the proceedings of the tender which was been submitted.

· Co-ordinating with the end user for the tenders been submitted and getting the updates. Liaise with the tender team on the stated for further and clear execution of price schedule and proposals.

· Compare the strategy among the competitors for optimistic solutions and proposals.

· Prepare the submission strategy for the tenders for the clear identification and proceedings.

· Lead the technical proposal preparation inline to the End user requirement.

· Standardize the technical proposal documents on the PEP & PCP.

3) Engineering Management & Coordination with Engineering Department

· Review the EDCL schedule & date of deliverables against the planned dates. Organizing weekly meetings with engineering team per the project deliverable.

· Review the Engineering documents to ensure that there are no additional cost impacts & in case of cost impacts, raise the Variation Order Request.

· Review the Technical specifications & do the IDC (Inter Discipline Check) to ensure on the comprehensive technical proposals.

· Review the documents against the Singapore standards and specifications. Compare the Engineering deliverables against the ITB.

· Monitor the Engineers on the IDC comments on regular aspects.

4) Client Management & Coordination

· Lead the meeting with the Clients. Attending weekly meetings with different custodians.

· Monitor the Delay logs/ Project tracker on a due basis per the project schedule and clear the holding point among the team and highlight the path forward with the owner/ End user.

· Understanding the concerns from client and provide the path forward with immediate for the smooth operations

· Always maintain a good relationship with Client/ End user on quality and competent lists.

5) HSE Management and Coordination with Corporate HSE Department

· Participate in the Client Weekly HSE walk down and advise on the area of improvement if any to be addressed.

· Encourage the work force & middle management for the area of improvement in safety aspects.

· Monitor the HSE incident reporting and HSE safe working hours in regular aspects.

· Encourage the work force in the toolbox talk for the safe work execution.

· Communicate with the team clearly on the objective and ensure that the HSE corporate policy is well established.

· Provide the Inputs from the project site on the identified area of improvements.

6) Quality Management and Coordination with Corporate QA/QC Department

· Monitor the Rework strategy and ensure that the reports been submitted to the corporate team.

· Ensure 72 hours of training for all the project members and construction team.

· Review the quality of training provided and ensure a startup for the training of new installation works.

· Ensure to have the QHSE walk down and QHSE Campaign in project site and report to

the QHSE corporate team.

· Arrange and identify the relevant third-party training for the relevant personnel.

· Encourage the work force to involve/ attend the competent training lists per individual capability.

7) Procurement & Coordination with Procurement Department

· Attending weekly PCL meetings on the clear tracking and execution of materials to be delivered. Monitor the Procurement deliverables by allocating the Project expeditor for the Jobs involved.

· Involved in the technical discussions with vendor and analyzing the technical proposals for the proceedings.

· Pre-qualify the compete/ qualified vendors in the System for further proceedings in advance.

· Co-ordinate with the Client to get the approval for the in-house vendors. Propose alternate vendors in benefits to the company adherence and proposals.

· Involve In House Vendors on the EPC Jobs and get the In-house Vendors in the Client Approved Vendor lists.

· Co-ordinate with the Procurement team on the clear strategy of commercial negotiations.

· Ensure to clear the technical aspects in prior to issue the PO. Follow the communication matrix for the Bid Tab and commercial discussions with Vendor

8) Construction Planning & Execution & QS Management

· Co-ordinate with the client construction team on the work front availability and the further proceedings

· Lead the weekly Construction meetings & the Client meetings. Share the reports and analysis for the work done at site.

· Conduct internal meetings with the individual crew for the proper way of improvement at work site.

· Analysis the Smart construction progress on weekly basis.

· Monitor the S curve (planned against Actual) on weekly basis. Identify the area of improvements on the work progress and construction sequences.

· Monitor the project deliverables of individual projects through the tracker and assign the individual responsibilities to the team.

9) Training and Coordination with Corporate Training Department

· Verify the training hours for the individual working crew.

· Identify the relevant trainings to impose for the lead man and the other skilled workers.

· Attend corporate meetings with the QHSE team for the further improvement of training skills.

· Conduct the training on smart construction progress measurement to the work force.

· Provide necessary inputs to the corporate training department for the further

implementation of training procedures and methods.

10) Construction Equipment Monitoring

· Ensure that the necessary equipment used by the construction team is properly registered in the HILTI tracker.

· Monitor the construction equipment loading on a regular basis.

· Communicate with the other projects on the requirement of equipment to be reserved for the critical works.

· Optimize the use of equipment by sharing with other disciplines

· Optimize the use of equipment per the project budget and requirements

11) Resource Planning & Innovative improvements

· Monitor the manpower loading per the projected schedule.

· Set the PI through the project Planner and derive the manpower loading. Conduct the brainstorming session and briefing to the team on the usage of manpower.

· Identify the crew composition and derive the project planning schedule. Monitor the PI on regular basis in along with the loss man hours through the project planner.

· Arrange for a separate session with the crew, who got the negative plans and lesser PI against the Plan.

· Monitor the PI on day to basis through common APP & Smart construction tools.

12) Reports

· Preparation of monthly progress/ project report for the project meeting with the top management.

· Verify the project daily report submitting to the client.

· Document lesson learnt from project to share among the organization to avoid it to repeat again.

· Ensure and monitor monthly management reports to update the status of project status.

· Ensure QHSE records are in placed throughout the project monitor the cash flow and the commitment reports on a monthly basis.

· Review Finance report to understand the company finance status.

13) Goals

· Completion of project within the time schedule.

· Manage the multiple EPC Projects (more than 2 projects) and complete the project handover in a suitable time frame. Optimize the manpower by sharing with the projects going under the stated portfolio.

· Completion of project by achieving the customer satisfaction of 80% in minimum.

· Achieve the project total man hours lesser than the projected man hours.

· Obtain additional Variation orders from the end users by proposing alternate ways in execution. Target to get VO of about 10% in at least from the project contract.

· Completion of projects per schedule and before the schedule of completion.

· Achieve “0” NCR on the project execution and quality.

· Ensure to complete the project with “0” accident and “0” Near Miss.

14) Career Path:

· To become a stronger professional project manager for the overall disciplines and set the target of REI to manage the project management department.

· Accrue more projects on EPC and to work independently.

· To reach the height of Project manager for E&I works in 3 Years of time and to work as a Project manager for overall discipline in 9 years of time from present.

Requirements

· Preferably Degree/Diploma in Engineering in Mechanical, construction management or equivalent.

· Preferably 5-10 years’ experience in construction experience in EPCM, EPCC sector.

· Proven track records of successful project completion on time and on budget or exceeding expectations will be well regards.

· Demonstrated leadership experience and skills to manage large or multiple construction projects

· Preferably computer literate in MS Office Word, Excel and PowerPoint

· Preferably 3 to 5 years of management experience

· Positive attitude with good interpersonal skills

· Ability to work in a dynamic and fast paced environment.

1. Duty & Responsibilities

• Implement and provide directions in project planning, coordinate works, liaise with sub con/supplier, ensures overall progresses based on schedules.
• Effectively communicate project expectations to team members and stakeholders.
• Coordinate with the drafting department with regards to the preparation/ submission/ approval of shop and as-built drawings.
• Liaise with client's representatives with regards to all site matters, attend site meeting if required.
• Update Project Status, prepare monthly progress claim for the project.
• Develop best practices and tools for project execution and management.
• Performed Ad-hoc duties assigned.

2. Requirement

• Min. 8 years and above for Electrical & Network Telecommunication Project Management experience required.
• Bachelor/ Master Degree in Electrical/ Electrical Communication Engineering or relevant field.
• Proven experience in leading build projects from initiation to project closure
• PMP certification from PMI or equivalent is an advantage.

1. Duty & Responsibilities

• Implement and provide directions in project planning, coordinate works, liaise with sub con/supplier, ensures overall progresses based on schedules.
• Effectively communicate project expectations to team members and stakeholders.
• Coordinate with the drafting department with regards to the preparation/ submission/ approval of shop and as-built drawings.
• Liaise with client's representatives with regards to all site matters, attend site meeting if required.
• Update Project Status, prepare monthly progress claim for the project.
• Develop best practices and tools for project execution and management.
• Performed Ad-hoc duties assigned.

2. Requirement

• Min. 5 years and above for Electrical & Network Telecommunication Project Management experience required.
• Bachelor/ Master Degree in Electrical/ Electrical Communication Engineering or relevant field.
• Proven experience in leading build projects from initiation to project closure
• PMP certification from PMI or equivalent is an advantage.

The responsibilities shall include, but are not limited to, those contained in the following statements:

1. direct liaison with stakeholders in charge of project services (procurement/ draughting/ assets/ human resources);

2. specify scope of work and budgets for engineering activities, assets and 3rd party activities;

3. to be conversant with all items and conditions of the project both technically and commercially and to have a full understanding of the scope of work;

4. implementation, control and monitoring of overall safety and quality assurance in all project related activities as laid down in the company’s management system;

5. preparation and maintenance of budgets for the project assisted by the cost controller

6. preparation of the monthly reporting internal & external;

7. ensuring variations between actual costs and budget are monitored and controlled;

8. identifying and initiating any variations towards the client or approve/ reject variations from third parties on the basis of the contract T&C’s;

9. liaise with the client and ensure that project meetings are held with relevant personnel;

10. establishing all the resources from company’s departments needed to carry out the project.

11. encourage any technical developments or suggestions that will enhance the overall project engineering or operational efficiency;

12. ensure that all aspects of project administration, engineering and operations fulfil the contract requirements and are conducted in a safe, efficient and profitable manner;

13. conduct all activities within the management system, procedures and work instructions;

14. advise and assist commercial department with tenders for potential work;

15. ad-hoc duties as deemed required to complete the workscope.

• 5 days, Near Boon Lay, transport provided
• 1yr contract, completion bonus
• Staff benefits entitlement
• Salary: $3000 - $3500 basic
• Able to start within short notice

Job Description:

• Compile and breakdown contract negotiation language changes preferable using any AI to track and consolidate contract language between original vs. revised.
• Other general support includes planning and purchasing such as emailing, communicate with suppliers for committed dates, generate report, etc.
• Any other general task assigned by the purchasing & planning supervisor.

Job Requirements:

• Minimum a Diploma in Supply Chain Management, Business Administration or related fields.
• No experience can apply as on-the-job training will be provided
• Willing to learn and enjoy interacting with internal/external customers
• Minimum 1 year of experience in purchasing and planning.
• Able to communicate in English and Mandarin as this role will involve liaising with mandarin-speaking suppliers overseas.
• Able to work effectively and independently under pressure.
• Able to meet deadlines and has strong follow up skills.
• Detail oriented and high degree of accuracy.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Are you up for the challenging next step in your career? Stolthaven’s Asset Management – Projects department is looking for a Project Engineer who responsible for execution of the technical projects (Capex) for the terminals.

As a Project Engineer, you will be the project manager and have responsibility for the engineering and construction of projects, including all relevant project management tasks.

In this dynamic role, your responsibilities range from construction and modification of physical assets to providing engineering support to the Asset Manager in the design and construction of bulk liquid storage facilities and related equipment. Within the local and global Asset Management teams, you will share knowledge & experience on your specific project or engineering discipline expertise and be involved in efforts to train Asset Management colleagues or other Stolthaven functions.

As part of the local Asset Management team, you will work in close cooperation with the MR&I Engineer, Maintenance Supervisors and other roles for developing project cost estimates to existing and proposed facilities in consideration of environmental and customer requirements. The position is also responsible for review and quality control of field construction work, although potentially supported by Construction Supervisors. Implements programs for compliance with all government and regulatory requirement and other technical areas.

SHVN Stolthaven Terminals a division of Stolt[1]Nielsen Limited (SNL), is the specialist storage provider of bulk liquids: Chemicals, clean petroleum, gases, vegetable oils, biofuels and oleochemicals. Our mission is to be the most respected global storage provider, delivering safe, high-quality, sustainable storage and handling solutions for our customers around the world.

Key Responsibilities

1. Provides comprehensive technical and management support on all technical projects assigned by the Asset Manager. Typically class I & II capex projects. This includes, but is not limited to:

• Prepare project details, scope engineering documents and cost estimate for the execution of the capex program together with (main) contractors and other departments and disciplines
• Prepare Requests for Quotation and other procurement documents in close cooperation with Stolthaven’s procurement team
• Responsible for coordination of procurement and or contracting of materials and services for your projects together with Stolthaven procurement
• Governance on quality and legal and or safety requirements during the whole project including execution
• Responsible for commissioning and closing of the project to operations and maintenance and ensure closure of project including timely completing of as-built files
• Responsible for leading change process in case of scope change
• Responsible for safety, quality, progress and cost control and reporting during the project
• Sets priorities and project scheduling for completion of projects within required deadlines
• Provides input to Manager of Engineering as required to complete monthly cost and schedule tracking reports on capital projects
• Supervises contractors in activities related to new construction, modifications to existing facilities and plant repair items
• Responsible for leading project evaluations and Management of Change processes for the projects at hand.
• For larger projects, this role can also be part of a project management team whereas the responsibilities are defined by the Project Manager.

2. General multi-disciplinary engineering works, such as:

• Support the preparation of technical proposals for improvements of technical installations
• o Proactively identifies technical risks in projects and seeks for mitigation
• o Providing assistance in the formation of annual capital budget forecasts
• o Ensure all systems within the facility are designed, installed, and maintained in accordance to local, state and federal regulations and standards

3. Support or promote innovations, new products and methods by:

• Meeting with vendors to acquire knowledge to technical advancement, cost control and alternate solutions to typical terminal design and maintenance requirements
• Attending continuing education seminars and conferences to acquire knowledge pertinent to technological advances and regulatory changes
• Interacts with other initiatives for example in Risk Based Inspection meetings contributing to standardized way of working over terminals and within team by working on corporate projects assisting the global Asset Management team

4. Enforces established plant safety and environmental policy and procedures as related to assigned projects and related tasks.

Qualifications

1. Bachelor/Master degree in Mechanical Engineering, E&IA, Civil or related field

2. Proven track record in an engineering design position, preferably in the field of storage tanks or in a related industry

3. Must be familiar with all applicable standards and codes relating to bulk liquid storage facilities for the applicable terminal location. This could include IEC, API, EEMUA, ANSI, NFPA, NEC, OSHA, and CFR and any other (local) codes.

4. Project management experience is preferred field

5. Minimum 5 years progressive engineering experience in terminal or related industry

6. Minimum 10 years progressive experience in terminal or related industry may be accepted in lieu of a degree

7. Self-motivated to ‘close the loop’ with actions and administrative responsibilities

8. Fluency in English and preferably in Chinese (read & write) as the job requires liaising with our Taiwan joint venture

9. Able to build and maintain both internal and external relations on various levels

10. Able to communicate effectively both verbally and in written

11, Proven safety leadership and service mindedness

12. Competences: self-motivated, flexible, stress resistant, result driven, team player, humour

13. Requires advanced conceptual thinking in complex and/or completely new situations and analytical skills

14. Must be computer literate with specific skills in MS Office

15. Knowledge of and experience with planning software (e.g. MS Projects, Oracle Primavera etc.) and Autodesk products (e.g. Autocad) is considered an advantage

16. Occasionally the ability and willingness to work weekends and/or holidays to accomplish critical project assignments

17. Depending on the required engineering discipline, have knowledge of the following:

• Mechanical: Must have in-depth knowledge of all standards and codes relating to bulk liquid storage facilities applicable to the location, such as API, ANSI, NFPA, NEC, OSHA, CFR, PGS
• EI&A: Must be familiar with all standards and codes relating to bulk liquid storage facilities applicable to the location, such as ATEX, IEC, IEC61511, SIL applications, field instrumentation
• Affinity with IT network components (e.g. firewall and basic networking setup) and experience with FAT for E&I system, panels, automation, etc.
• Knowledge and experience with reviewing drawings such as P&ID, Single Line Diagram, MCC drawings and other E/I/Automation specifications, calculations and drawings
• Knowledge and experience with ACAD and E-plan drawings
• Experience with trouble shooting E&I installations

18. Willing to working in Jurong Island (Company transport is provided at designated pickup point)

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: 5 days’ work week (Mon-Fri), 8.30am to 5.30pm
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members
• Company Transport is provided as designated pick-up point

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our terminal

Got questions about the process? Contact [email protected].

About Stolt-Nielsen

Stolt-Nielsen Limited is a long-term investor and manager of businesses, focused on opportunities in logistics, distribution, and aquaculture. The Stolt[1]Nielsen portfolio consists of its (three) global bulk-liquid and chemicals logistics businesses – Stolt Tankers, Stolthaven Terminals and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI).

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

Job Responsibilities:

Assist to review of contractual documents and technical specifications

To be involved together with the Senior Project Engineer/Manager for kick-off, pre-project/project meetings to ensure team members are clear on the objectives, deliverables, quality, lead-time, complexities and carry out the project execution and contingency plan, if any

Assist Senior Engineer/Manager to monitor the daily progress of activities to achieve on or before schedule, ie. By comparing the planned vs actual progress status, identify critical activities, improvements and/or contingency plans if any

To be involved in technical meetings and assist in preparation change request submission as required

To be fully in-charge of the coordination of the project, from the kick-off to delivery to client and commissioning work, including coordinating with the respective support units to ensure project is on schedule

Preparations of the project documentations, furnishing drawings and documentations/reports to clients as requested Liaise with clients to keep them updated of latest schedule of changes if any

Monitor on the work progress based on project timeline

Keep track of project status, prepare and submit weekly/monthly progress reports as required

Work closely with Project Manager/Engineer to set up and maintain an efficient document control register, system and procedures Prepare document transmittal and submissions to clients

Liaise with subcontractors and vendors for updates and documentation

Ensure documentation register is up-to-date with latest revision of documents, both received and submitted Ensure all project documents are properly files, stored and archived for future reference.

Carry out other duties as and when assigned by immediate superior or higher management.

Job Requirements:

Min GCE O Level / A Level / Diploma

Min 1 - 2 years experience in Project and Documentation Control Project management and organisational skills

Strong analytical and problem-solving skills.

Ability to prioritise and perform work in a timely manner. Perform duties with accuracy and with strong degree of urgency Highly organised and a team player

Capability to multi-task, respond to change, and adapt accordingly Time management and effective communication

Excellent leadership and interpersonal skills, comfortable working independently and taking a high level of responsibility A self-starter with positive attitude

Good Technical/Engineering competency would be an advantage.

Job Benefits

• Positive and closely knitted working environment

• Group Personal Insurance/ Group Personal Accident Insurance

• Annual leaves starting with 14 days and up to 21 days

Working location:

15 Kwong Min Road

Singapore 628718

Shortlisted candidate will be notified

Job Description

• Business new businesses for new build of FCB, CTV, launch boats and passenger ferries.
• Build and develop good working relationship with potential customers and maintaining teamwork showing high interests.
• Solve daily conflicts at ground level by monitoring and coordinating sequential and incompatible jobs affecting master schedule.
• Closely liaise with classification societies, ship owners, owner specialist engineers, vessel crew and ship agents to ensure successful completion of the project meeting or exceeding customer's expectations.
• Meet commercial / naval contractual commitments and quality of repaired ship.
• Capture additional works and raise variation orders and provide information to Corporate Dept for more competitive pricing.

Requirements

• Diploma/Degree in Naval Architecture/Marine/Mechanical Engineering preferred.
• Possess 2 years' experience in similar capacity from marine / shipbuilding.
• Macro thinking with good emotional quotients
• Able to make appropriate decisions and judgments, decisive and take proper actions.
• Able to negotiate and prepare quotations after proper costing with vendors and suppliers, local and overseas
• Willing to work late at times and possess leadership qualities.
• Proficient in MS Office

Address of Work

• Location: Tuas Road (Direct bus from Joo Koon MRT)
• 5 days work week with occasional weekend depending on volumes
• Working Hours: 8.30am to 5.30pm

Join our dynamic team as a Business Development Executive!

In this exciting role, you’ll have the opportunity to:

• Discover and secure industrial scraps containing precious metals such as Gold & Silver within the vibrant market of Singapore.
• Drive profitable decisions by evaluating purchases with a keen eye for cost efficiency.
• Craft compelling proposals for customers, leveraging our unique calculation methods for precious metals.
• Stay ahead of the curve by monitoring industry trends and conducting competitor analysis to understand the pulse of the market.
• Identify opportunities for improvement or differentiation in our services, and spot potential business opportunities and threats.
• Foster enduring customer relationships to grow existing accounts.
• Ensure smooth transactions by documenting and monitoring all trade deals, guaranteeing prompt delivery of metals and timely payment collection.
• Collaborate with our marketing team to boost brand awareness and generate leads.
• Nurture new customer relationships to unlock fresh business opportunities.
• Maintain an organized workflow by updating our CRM system with supplier and business lead information, as well as follow-up statuses.
• Keep the team informed by providing regular reports and updates to the Business Development Group Chat and CRM System on activities, targets, and performance.

This role offers a unique blend of strategic thinking, relationship building, and meticulous organization. If you’re ready to make your mark in the precious metals industry, we’d love to hear from you!

Company Vechicle will be provided. Class 3 driver license is required.

Chinese speaking is required to communicate with the team in China.

Benefits include:

• 2 Way Transport provided from Jurong East MRT.
• Medical and Dental Benefits.
• 5 day work week.

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

JOB RESPONSIBILITY

• Find tender opportunities GeBIZE.

• Prepare Tender and submission.

• Familiar with reinstatement and maintenance work.

• Review and analysis of Tenders Drawings & Documentation.

• Preparing Tender submissions and reviewing Procurement & Reviewing of Contracts, and ensuring compliance.

• Reviewing and commercial management of all projects, to ensure accurate and reliable reporting.

• Review all incoming correspondence from Clients, Consultants & Design Team to identify contractually critical items and to initiate replies.

• Estimating a range of projects in a variety of sectors.

• Improve and implement best practice commercial processes and accurate budgeting.

• Maintain accurate records and provide necessary detailed backup to support commercial tracking and costing.

• On Site measurement of Electrical Services.

• Preparation of specialist sub-contract work packages.

• Preparing monthly Commercial Progress reports.

• Other ad-hoc duties assigned by Construction Manager.

As a Project Manager, you will manage and oversee all aspects of a project to ensure it is completed on-time and within budget. You are responsible for managing scope, cost, schedule, internal staffing and outside vendors. You will prepare reports for upper management regarding status of project as well as contribute to moderately complex aspects of a project. Your work is generally independent and collaborative in nature.

Responsibilities:

• Directs and manages large and complex project development from beginning to end
• Defines project scope, goals and deliverables to support business goals in collaboration with senior management and stakeholders
• Develops full-scale project plans and associated communications documents
• Communicates project expectations to team members and stakeholders
• Liaise with project stakeholders on an on-going basis
• Estimates resources and participants needed to achieve project goals
• Develops employees to be self-sufficient in continuous improvement tools
• Functions as leader for continuous improvement events
• Aligns activities with corporate goals around safety, quality, delivery and cost
• Performs root cause analysis on gaps, identifies waste, and works with leadership to drive sustainable corrective action
• Drafts and submits budget proposals, and recommends subsequent budget changes
• Negotiates with other department managers for acquisition of required personnel
• Determines and assesses need for additional staff or consultants and makes appropriate staffing adjustments during project cycle
• Sets and manages project expectations with team members and other stakeholders
• Delegates tasks and responsibilities to personnel
• Identifies and resolves issues and conflicts within project team
• Identifies and manages project dependencies and critical path
• Plans and schedules project timelines and milestones using appropriate tools
• Tracks project milestones and deliverables
• Develops and delivers progress reports, proposals, requirements documentation, and presentations
• Manages changes in project scope, identifies potential concerns, and devises contingency plans

Qualifications:

• Associate’s degree required; Bachelor’s degree preferred
• 5 years required, 7 years experience preferred of directing work in a large-scale project management capacity, including all aspects of process development and execution
• Business and management principles, including strategic planning, resource allocation, and production methods
• Prior experience with managing people and processes to achieve objectives
• Ability to build effective business relationships with other functional areas to best support mutual objectives
• Excellent problem-solving skills and ability to analyze workflow and processes to provide productive service to internal and external customers
• Interpersonal, conflict management, and negotiation skills required, including strong human relations skills to supervise and develop assigned employees effectively
• Adept at conducting research into project-related issues and products
• Ability to learn, understand, and apply new technologies
• Ability to effectively prioritize and execute tasks
• Effective written and verbal communication skills
• Excellent computer skills

• 5 days, Near Boon Lay, transport provided
• 1yr contract, completion bonus
• Staff benefits entitlement
• Salary: $3000 - $3500 basic
• Able to start within short notice

Job Description:

• Compile and breakdown contract negotiation language changes preferable using any AI to track and consolidate contract language between original vs. revised.
• Other general support includes planning and purchasing such as emailing, communicate with suppliers for committed dates, generate report, etc.
• Any other general task assigned by the purchasing & planning supervisor.

Job Requirements:

• Minimum a Diploma in Supply Chain Management, Business Administration or related fields.
• No experience can apply as on-the-job training will be provided
• Willing to learn and enjoy interacting with internal/external customers
• Minimum 1 year of experience in purchasing and planning.
• Able to communicate in English and Mandarin as this role will involve liaising with mandarin-speaking suppliers overseas.
• Able to work effectively and independently under pressure.
• Able to meet deadlines and has strong follow up skills.
• Detail oriented and high degree of accuracy.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Job Description

• Create and maintain vendor master, customer master, and bank master data within SAP for all Keppel segments.
• Ensure data is created, updated, or deactivated in accordance with Keppel’s data governance policies.
• Maintain customer credit limits within SAP.
• Perform periodic master data cleansing activities.
• Assist the MDM Manager in updating Standard Operating Procedures (SOPs) when there are changes to the process.
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Possess LCCI / qualification in Accounting-related field or equivalent
• Proficient in MS Office applications
• Possess good communication and interpersonal skills
• Able to multi-task, meticulous and a good team player
• Self-driven and able to work under pressure
• Knowledge of SAP is advantageous

Responsibilities:

• Industrial Trends & Insights: Analyze market trends, data, and customer insights to generate ideas for NPD.
• Product Positioning: Define competitive positioning and unique selling propositions (USP).
• NPD Leadership: Oversee the entire NPD process, from concept to completion, including reformulations.
• Cross-functional Collaboration: Lead efforts with Regulatory, Marketing, Supply Chain, Manufacturers, R&D, and Quality for timely product delivery.
• Supplier Liaison: Source and coordinate with contract manufacturers and formulators; serve as the main contact for NPD discussions.
• Formula & Compliance: Review formulations and ensure ingredient/design compliance with regulations.
• Product Testing: Ensure understanding of product challenge tests, stability, and compatibility studies.
• Costing & Pricing: Research market prices, generate product costing, and propose pricing.
• Product Introduction: Conduct product training for marketing teams and sales leaders.
• Post-launch Management: Analyze product performance, manage feedback, and provide technical responses.
• CAPA Response: Address corrective and preventive actions raised by Quality.
• Standard Procedures: Contribute to and implement standard procedures aligned with industry and QMS standards.
• Other Duties: Perform additional tasks and projects to meet company goals.

Requirements:

• Degree in Cosmetics, Chemistry, or a related field.
• Minimum of 2 years of working experience in product development or management within the cosmetics or skincare industry.
• Preferred Candidates with an interest in marketing within beauty, skincare, personal care, or similar industries is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Looking to gain valuable real world work experience and help positively impact the health of billions of people? Apply for a GSK Traineeship today!

This offers you the opportunity to kickstart your career – to take on a real role with genuine impact! You’ll take on challenging, serious work on live projects or assignments. You’ll also get to learn from us, develop your skills and gain valuable experience for wherever the future takes you.

What will you do?

• Receipt of materials/chemicals from central warehouse, store and issue to production on timely manner.
• Performing SAP transactions in alignment with physical movement of goods.
• Ensure adherence to GMP requirement such as sanitization of materials, cleaning of classified and non-classified area.
• Receive, handling and management of process waste.
• Timely review temperature graphs from temperature sensors (PEMS and AMS)
• Maintain inventory accuracy and proper documentation (cycle count).

What will you learn?

• cGMP requirement in Biopharma manufacturing environment.
• Zone classification and requirements (cleaning and gowning).
• Inventory management (Kanban and SAP).
• Coordination between requestor, warehouse, and material planner (if shortage of materials)
• Exposure to Biopharma production materials and handling manner (material sanitization method)

What are we looking for?

• Curious, willing to learn and adaptable to changes.
• A lively interest in biopharma industry.
• Good interpersonal skills
• Disciplined and work with integrity.

What do we offer you?

• Working hours: 0800 to 1700, Monday to Friday.
• Subsidized cafeteria service.
• Comprehensive network of company transport serving multiple MRT stations