Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Summary:

• Basic up to $6000 (Senior), $5000 (Junior)
• Performance bonus
• Location: AMK / YCK / Central
• 5 days work week
• Familiar with ACMV
• Career advancement & stability

Key Responsibilities:

• Manage and lead the electrical team
• Perform engineering duties: design, engineering calculations, planning, tender and etc
• Perform testing and commissioning of ACMV electrical system
• QA/QC
• Resolve any technical issue during any stage of the project
• Liaise with clients, project manager, contractor and etc
• Ensure the team follows all electrical codes and standards
• Other relevant ad-hoc duties

Key Requirements:

• Min 5 years of relevant experience in Construction Electrical field, including testing and commission
• Familiar with ACMV

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Develop advanced video/image analytics technologies using both Computer Vision Algorithms and advanced ML/DNN
• Research technologies and concepts in the areas of Machine Learning, Computer Vision and Edge AI
• Participate in system design activities, prototyping and testing
• Follow and contribute to software development best practices

Qualifications

• At least a Bachelor’s Degree in Data Science, Computer Science, Engineering or similar
• Experience in developing Computer Vision applications, i.e. object detection & classification, object segmentation, computer vision algorithms, ML models optimization, etc.
• Experience with ML/DNN in at least one of the following frameworks: TensorRT, Tensorflow, Keras, PyTorch
• At least 2 years of experience with C++

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Experience:

• Computer vision: 3 years (Required)

Work Location: In person

Job description:

As a member of the filter design team, the successful candidate will play a key design role as a product owner of resonator/filter in development and commercialization of acoustic filters with both BAW and SAW technologies from beginning, concept meeting to end, mass production including characterization.

Experience with either SAW or BAW filter design -layout, simulation, fabrication, and characterization- is required for senior position and principal position is available for candidates with proven track record in ramping up commercialization of acoustics filters in mass production environment.

Responsibilities:

- Co-work with international team across China and Singapore on a cross-disciplinary team basis

- Use commercial circuit analysis and physical modelling tools as well as custom software packages to design and analyse acoustic filters

- Assist RF measurement analysis by generating test plans and analysing results

- Produce RF engineering reports to support team members

- Communicate with R&D team for co-design and device improvement

Qualifications/Desired skills:

- Track record in design and mass-production of SAW/BAW filters for mobile applications is highly desirable

- Strong skills and working knowledge of design simulation tools, e.g. ADS, AWR, HFSS, COMSOL, etc

- Understanding of RF test parameters and test equipment

- Understanding of filter application and mobile communication system and architecture

- Experience with drawing programs, schematic capture and PCB layout tools

- Experience in RFIC design, RF module and front-end system design is preferred

- Knowledge of MEMS fabrication

- Strong written and verbal English skills to support complex analysis

- Organized team player and a good learner who is open to discussions

Job Description

· Contribute to high-quality research and development work in TCOMS laboratory through physical experiments including:

o design of scaled physical test models, such as maritime vessels, offshore rigs, marine renewable platforms, and aquaculture systems for testing in TCOMS Ocean Basin.

o generation of detailed design, production, assembly, and as-built drawings of test models.

o Structural assessment of the test models as well as other support to be used in the experimental setup.

o Work with a team of engineers and technicians on model fabrication and modification, calibration, instrumentation, and experimental setup.

o enhance the measurement of models’ behaviour and response by use of appropriate sensors like load cells or custom strain gauges.

o document design processes, methodologies, and results.

o contribute to process enhancements for improved efficiency of research work.

· Perform research in the following areas:

o Offshore hydrodynamics

o Coastal Protection

o Structural response and health monitoring of Marine & Offshore platforms and floating structures

o Fluid-structure interactions

· Collaborate with internal teams, affiliated research institutes and other relevant stakeholders in proposal preparation and submission.

· Any other duties as assigned by supervisor.

Job Requirements

· Bachelor’s/ Master’s Degree in Civil Engineering, Mechanical Engineering, Marine Engineering, Offshore Engineering, or other related disciplines.

· Preferably 3 years of relevant research/industry experience with competent knowledge in some of the following areas:

- Offshore engineering, marine engineering, marine structures, hydrodynamics, naval architecture.

· Prior knowledge in the following numerical methods/software/programming languages will be an advantage:

- CAD software such as SolidWorks, Rhino, AutoCAD

- Engineering tools such as SESAM and ABAQUS

- Programming codes such as Python, MATLAB, or equivalent.

· Model experiments in wave flumes, wave tank or ocean basin.

· Good interpersonal and communications skills.

· Ability to adapt and work effectively as members of a team.

· Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

· Git Repository and Toolchain Management: Administer multiple Git repositories across different locations and develop automation toolchains using Python and scripting languages.

· Manage and Configure Firmware SDK: Oversee configuration management for firmware SDKs, ensuring modular design, code consistency, and automated testing prior to releases.

· Lead Automation and CI Integration: Implement and manage automation pipelines, particularly with Jenkins, and integrate CI solutions throughout the SDLC to enhance efficiency and automation.

Requirements:

· Bachelor’s degree or higher in Computer Engineering, Computer Science, Automation, or a related field.

· Proven experience in firmware SDK configuration management with a focus on best coding practices, such as clean and modular design, and automated testing prior to software/firmware releases.

· Strong expertise in managing Git repositories, including ensuring code consistency across two or more repositories hosted at different locations.

· Strong proficiency in:

o C: For firmware configuration management.

o Python: For managing Git repositories and creating toolchains.

o Scripting: Proficiency in batch, shell, or similar scripting languages.

· Comprehensive understanding of the SDLC and the ability to integrate CI solutions into each phase to achieve high levels of automation.

· Experience with cybersecurity and intellectual property protection, will be a significant advantage.

· Extensive hands-on experience with automation pipelines, particularly Jenkins.

Functional Competencies:

1. Perform review of marine construction, equipment of drawings / document according to applicable rules, regulations and delegations.
2. Communicate and work closely with internal and external stakeholders and ensure contract requirements are met.
3. Support and provide technical advice to clients.
4. Participate in meetings (both internal and external) as required.
5. Support Equipment & Material Certification team and Consultancy Services team in drawing review, inspection or consultancy work, as and when required.
6. Attend all scheduled trainings (locally and overseas) and ultimately achieving specified delegations as agreed in Performance Management Process.
7. Ensure timely and accurate submission of time & expense sheets.
8. Keep up to date with new rules, regulations and technical information or process disseminated through internal communication.

Requirements:

1. Degree qualified in Naval Architecture, Marine Engineering or equivalent with minimum 3 years relevant working experience on Marine and Offshore related field.
2. Minimum delegation level 1 within area of specialization: Hull, Machinery, Electrical / Automation, Safety, Stability / TLO.

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering center serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

Thales DIS Digital Payment business line is seeking a mobile developer for our successful Mobile payment product.

Thales DIS -Digital Payment offers a simplified digital experience solution for proximity payment and e-commerce, allowing banks and businesses to offer a multi-channel and multi-device payment experience. This sophisticated solution that involves multiple web services and clients, offers a single platform that provides ready-to-eat, easy-to-integrate services while ensuring best-in-class security.

Responsibilities:

• Participate in design, implementation, and validation of mobile SDK and application within the R&D project team structure in accordance with institutionalized processes and delivery standards
• Participate in the design and development of mobile SDKs
• Contribute to the improvement of existing technology platform/baseline and development methodology through prototyping and patent proposal
• Troubleshoot and SL3 support for our customers

Requirements:

• Degree in Information Security / Electrical/Electronics/Computer Engineering, or related fields.
• Strong knowledge of mobile development in Android, especially on relevant core platform technologies.
• Proficient in Java, Kotlin
• Around 8 years experience working with mobile technologies
• Proficient in native development is a plus
• Strong interest in mobile applications ecosystem
• Knowledge of OO design and programming skills
• Knowledge of unit testing and test automation
• Experience with continuous integration and build automation Jenkins and Gradle
• Motivated self-starter, strong logical, creative problem-solving skills and excellent analytical skills

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

Responsibilities & Duties:

• Provide on-site services for new and existing customers, including equipment servicing and upgrades.
• Conduct technical analysis of product implementations, modifications, and enhancements to products in accordance with specific customer specifications.
• Update customer on the nature of service provided and recommends equipment repairs or system upgrade.
• Troubleshoots technical issues and recommends solution to customer.
• Provides technical analysis of equipment installation, modifications, and upgrade in accordance to customer’s requirements.
• Regular communication with customer to ensure high level of customer satisfaction.
• Duties includes but not limited to equipment installation, servicing, maintenance, repair, and relocation.

Requirements & Skills:

• ITE / Diploma in Electrical or Mechanical Engineering.
• At least 2 years on site experience preferred.
• Experience in Automation and/or Robotics preferred.
• Knowledge and experience in using Solid Works and PLC programming will be an added advantage.
• Good problem solving and communication skill.
• On the job training provided.

Responsibilities & Duties

· Identify and develop potential new customers

· Provide support and further develop existing customers.

· Marketing, promoting and selling of products.

· Provide advice on best solution and product to customers.

· Analyse competitors and market trend.

· Prepare quotations.

· Meeting of sales target and plan.

· Perform other duties as assigned.

Requirements & Skills

· Minimum Diploma in engineering, preferably Robotics and Automation.

· Minimum 2 years of experience in technical sales.

· Strong communication and sales skill.

· Good knowledge of industrial automation systems / equipment.

The Rapid Response Damage Assessment (RRDA) program is seeking an Engineer or a Senior Engineer to assist with the modeling and analysis of vessel stability and hull strength for ships and offshore floating structures and verify their compliance with applicable Rules and Regulations.

· The RRDA program provides 24/7 technical assistance to ship and offshore floating structure related emergencies such as grounding and collision. When activated, RRDA is an extension of the vessel management team’s own response capability, focusing on the measure of changes occurring to hull strength, stability and the extent to which risk of pollution can be mitigated. This new position is expected to work along with a group of experienced engineers to respond to client service requests when emergencies occur or participate in routine vessel emergency response drills.

The RRDA work by nature of its complexity and difficulty require the fully competent application of conventional knowledge in a particular field of engineering or science. Through broader and more technically challenging work assignments, the ideal candidate will develop a thorough understanding of policies, methods and procedures.

What You Will Do:

• Under the supervision of an experienced engineer or the RRDA manager, develop analysis models and perform detailed engineering analyses to assess vessel stability and hull strength and verify their compliance with applicable Rules and Regulations.
• Perform work which involves conventional engineering practices but may include complex problems such as the resolution of limited information provided by the client, conflicting client requirements, or time constraints.
• Develop technically accurate and timely reports, and responses to client phone calls, emails and other forms of communication for review by an experienced engineer or the RRDA manager.
• Prepare accurate and timely weekly reports and billing on all work performed.
• Communicate the status of the current workload to all appropriate members of the team to meet the needs of clients.
• Standby for and respond to client service requests on the rotating shift
• May propose technical advice to field operations and other technical offices.
• May propose new approaches to problems encountered and make recommendations for changes in methods, procedures or designs.
• May work directly with clients to identify and resolve problems in the area of technical expertise.
• Work as a team member within the RRDA response team. May work autonomously, once trained, with limited supervision.
• Implements and maintains ABS Quality System requirements relative to responsibilities after undergoing ABS Quality System training.

What You Will Need:

Education and Experience

• B.S. degree in Naval Architecture, Ocean Engineering, Civil or Structural Engineering, or other related disciplines.
• Experience (coursework, research, or industry experience) with vessel stability calculations and ship and/or offshore floating structures is preferred
• Experience with stability software and/or salvage software such as Hecsalv, GHS, or NAPA is a plus.

Knowledge, Skills, and Abilities

• Knowledge of related technical disciplines required.
• The ability to identify, analyze and propose solutions to problems (i.e., the competence to demonstrate complex problem-solving skills).
• Good command of the English language.
• Ability to communicate orally and in writing.
• Ability to work well with others and sometimes within tight schedules

Job Description

• Optimize Shopee Ads core advertising strategies, such as traffic selection, smart bidding, ranking strategies and auction mechanisms.
• Provide solutions to long-term challenges like cold start, stability, and ecosystem development for the platform.
• Participate in the development and iteration of Ads algorithms by using Machine Learning.
• Enhance the efficiency of automated delivery products, combining intelligent product selection with full-chain optimisation to improve ads performance.
• Deeply understand buyer and seller demands to create incentive-compatible, mutually beneficial advertising strategies and products.
• Continuously improve the monetisation efficiency and user experience of Shopee’s advertising products, increase monetisation efficiency and driving the healthy, sustainable development of Shopee advertising

Requirements

• At least 3 years of relevant experience in algorithm-related roles
• Minimum 2 years of hands-on experience in one or more of the following areas: machine learning, recommendation systems, computational advertising, pattern recognition, data mining, or artificial intelligence.
• Hands-on experience with machine learning frameworks such as PyTorch, TensorFlow.
• Bachelor’s degree in Computer Science, Engineering, or a related technical field, or equivalent practical experience.
• Strong communication skills, collaborative team spirit, and a product-focused, data-driven mindset.
• Experience in ecosystem construction, monetisation efficiency, or mechanism design is preferred
• Prior experience in e-commerce companies is preferred

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The Candidate will be working on dynamic modelling and simulation of the powertrain of a full electric tug vessel, mainly using MATLAB/Simulink. The simulation models will be used to investigate the steady state and transient behaviour of the ship’s electric propulsion system.

Key Responsibilities

• Development of dynamic models of the ship’s electrical propulsion system including energy storage systems.
• Investigate steady-state and transient behaviours of an all-electric ship’s electrical system in various operational scenarios.
• Carry out mission-specific electrical power consumption analysis
• Electrical propulsion and ESS design optimization.
• Any other duties as assigned by the supervisor.

Job Requirements

• Bachelor's Degree or above in the areas of Electrical Engineering, Mechanical Engineering or Marine Engineering
• Other relevant disciplines are welcome to apply
• Background in programming languages and related research project experience is ideal

Job Description :

· Incremental improvements/development of software modules

· Analyze customer/production issues and implement solutions within the existing machine application (bug fixing).

· Investigate and implement engineering change requests.

· Testing of new releases by simulating processes and on actual equipment.

· Work with version control tools and issue tracking tool for software release management.

· Creates and maintains engineering documentations relating to software development / bug-fix / feature releases following BESI standards and design rules.

· Ensure fast response to customer and production issues.

· Provides engineering support to assigned R&D/CIT projects.

· Install & (beta) test new software release/fix at customer sites (ability to travel needed)

Requirements :

Education

Bachelor Degree in Electrical or Computer Engineering (Mechatronic) or Software Engineering

Work experience

At least 3 years relevant experience in automation / equipment industries.

Significant practical experience in software engineering and testing (embedded software and HMI environment).

Experience with agile software development processes, quality control and test driven development

Expertise and methodology

Proficiency in Microsoft (C++, VB6) using Microsoft Visual Studio 6.0 and programming language “C” and “C++”.

Knowledge of UML and state machines; State Transition Diagrams

Very good English skills (verbal and written)

Experience with version control in Mercurial / GIT is a pre

Experience with SECS/GEM is a plus

Other requirement criteria

· Good communication skills in a global environment

· Result oriented

· Strong analytical skills

· Team player

· Self-organized, proactive

· Stress resistant

· Affinity with mechatronic systems

· Ability to travel for on-site support (<30%)

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Fabrication of 2D materials based memristors using mask aligner, electron beam evaporator and shadow masks
• Characterization of 2D materials based memristors using a semi-automatic probe station, semiconductor parameter analyser.
• Characterization at the materials level using SEM, TEM, FIB, XPS, and Raman Spectroscopy.
• Other routinal paperwork related to the correct functioning of the group, including purchases, contract preparation and reimbursements.

Qualifications

• PhD in Materials Science and Engineering plus 3 years postdoc in memrsitors.
• Proficiency in using all the above mentioned machines
• Publications in top journals
• Fluent in English and Chinese language (including read/write) as the candidate is also expected to support applications for funding in collaboration with China (for example, with the NUS - Suzhou Research Institute).

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS.
• Change Management, including review new and implemented changes, chair CAB, review change schedule, maintain dashboard, prepare comms.
• Incident Management, including analysing trends, incident workarounds, monitoring aged incidents.
• Major Incident Management, including communication, being part of the Incident Repsonse Team, managing suppliers
• Problem Management, including chairing any problem meetings, managing active problems, highlighting new problems.
• Release Management – liaising with the testers, vendor, tracking features and defects
• Service Request Management – documenting processes, analysing trends, identifying service improvements, working with teams to design new processes
• Continual Service Improvement – being able to highlight areas of improvement for effectiveness and efficiency
• Service Reporting
• ServiceNow – to assist with the day-to-day management of the tool, including working on incidents and requests

Technical Skills & Qualifications Required:

• Good knowledge of ITIL
• Good knowledge of ServiceNow
• Good knowledge/experience of using the Microsoft suite, specifically including SharePoint , Visio and Excel
• Exposure to/familiarity with automation

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 3-5 years of relevant working experiences.
• A good team player.
• Excellent interpersonal skills.
• Excellent verbal and written communication skills, and ability to communicate with different audiences and write a range of document types – procedures, comms, training modules.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Sound problem solving and investigative skills.
• Desire to follow best practice and development standards as agreed within IT.
• Keen to learn new skills.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

AIDRIVERS is paving the way to revolutionize mobility with advancing robotics and automotive technology in industrial applications making it; efficient, safer and smarter.

In this role, you will collaborate with our team of world-class engineers and researchers with diverse backgrounds in areas such as robotics, mechatronics and autonomous navigation software stack.

Responsibilities Includes:

• Awareness and knowledge of sensors, communication technologies, or control devices for various automation solutions

• Use of appropriate communication protocol such as Ethernet, CAN Bus and wireless

• Design, develop, or implement control logics or algorithms for electromechanical or pneumatic devices or systems

• Conduct studies to determine the feasibility and performance benefits of new mechatronic systems

• Calibrate sensors, automated systems, control systems, or system components to maximize efficiency of automation

• Consider safety, reliability and accuracy of the system at all times

• PLC programming for embedded logic programming

• Design Unit, Integration and Regression test cases

• Test commissioning and result documentation and reporting using appropriate means

Skill set required:

Essential:

• BSc/ Eng level or higher qualification or above in mechatronics engineering from a respected organisation

• 2+ years’ experience in the field.

• Experience and understanding of CAN, Ethernet and other communications technologies

• Experience of controller programming languages: structural or ladder logic

• Able to understand electrical systems and schematics

• Familiarity / working with sensors and sensor calibration

• Good English spoken and written skills

• Desire to learn and improve all the time

Desirable:

• Experience and working knowledge of automotive systems

• Experience / knowledge of hydraulic and pneumatic systems

• Experience of programming languages C, C++

• Experience IFM PLC

Job Capsule

In accordance with established policies, procedures and standards, is responsible for the activities related to an assigned organizational element, program, project or task. Will normally plan, conduct and supervise engineering design reviews and analysis assignments involving a major project or several smaller or less complex projects. These projects by nature of their complexity and difficulty require the fully competent application of conventional knowledge in a particular field of engineering or scientific field. Project work and assignments may be broad in nature requiring ingenuity and cross functional coordination.

Job Duties/Roles

1. Provides day-to-day leadership of Engineering staff assigned. Assigns projects to Engineers and monitors the progress of all assigned projects. Ensures the delivery of high quality service and maintenance of good customer relations.

2. Devises new approaches to problems encountered and makes recommendations for changes in methods, procedures or design where necessary.

3. Monitors the technical quality, content, consistency, continuity and timeliness of action of all assigned projects.

4. Applies intensive and diversified knowledge of engineering principles and practices in broad areas of technical responsibility. Performs engineering reviews and analyses when necessary. Reviews other engineers' work and provides appropriate guidance and training when necessary.

5. Participates in the development and changes of Rules. Advises assigned staff in matters related to the application of Rules and Regulations.

6. Prepares written response to clients in accordance with established procedures.

7. Maintains liaison with other engineering specialists internally and externally.

8. Monitors the performance, development potential and training needs of engineers assigned. Keeps management informed of manpower needs.

9. Develops or assists in the development of qualification statements, proposals, bids and other presentation materials.

10. Implements and maintains the ABS Health, Safety, Quality & Environmental Management Systems within assigned area of responsibility.

11. Prepares accurate billing to clients.

Knowledge, Skills and Abilities Required (KSAR)

1. Should have advanced practical industry related experience.

2. Knowledge of related technical disciplines.

3. Knowledge of applicable Rules and Regulations and impact of Rule applications and interpretations.

4. Knowledge of company business policies and procedures.

5. The human relations skills necessary to maintain positive client contacts and provide leadership and motivation to subordinate staff and peers.

6. Ability to effectively communicate orally and in writing.

7. Ability to identify, analyze and solve complex or unique engineering problems.

8. Ability to undertake short- and long-term planning to provide for efficient and effective scheduling of work assignments.

9. A working knowledge of the ABS Health, Safety, Quality & Environmental Management Systems (internal candidates only).

Duties to be Performed:

Senior Mechanical Engineer for HVAC Systems shall be handling on designing and delivering mechanical systems for industrial properties in semiconductors, electronics, biopharma, and related industries.

The mechanical systems include Cleanroom, HVAC, Process exhausts, vacuum, condenser, chilled water, process and process cooling water, fire protection, diesel fuel, natural gas and associated, equipment, ducts and pipe works.

The Duties/ Responsibilities of the Prospective Candidate are,

• Responsible for Engineering of Concept / Basic / Detail design for Mechanical systems with the focus of HVAC systems.
• Shall perform system related engineering calculation including heat load calculation, equipment sizing, distribution system sizing from fundamentals with spreadsheet tools.
• Shall develop design drawings including, but not limited to, PFD, Schematics and Layout for required HVAC systems.
• Engineering design of HVAC and Process Exhaust systems for new/ existing production buildings.
• Conduct feasibility study and conceptual design of Mechanical Systems throughout all technological aspects
• Review of HVAC system in preparation for testing and commissioning and validation
• Coordination and engineering in regards of R&D Equipment requirements
• Provision of engineering service for tendering, conduct site show round and brief bidders
• Develop a detailed project plan to monitor and track progress
• Create and maintain comprehensive project documentation
• Meet with clients to take detailed ordering briefs and clarify specific requirements of each project
• Coordinate internal resources and third parties/vendors for the flawless execution of projects
• Clearly define and align inter-discipline technical interfaces and scope demarcation
• Work with CAD drafters and BIM modeler to guide, check and carry out field verification with them.
• Prepare SOW (Scope of work) for bid package, including BOM for form of tender.
• Calculate system OSE (Operating System Efficiency) of chilled water system to meet MEES requirements.
• Frictional loss calculation for fan and pump head and estimation of power requirements.
• Perform psychrometric analysis on system design
• Trouble shooting of design and construction related problems and develop solutions accordingly
• To promote safe working practices and to protect the health and well-being of Employees, contractors and Customers.
• Liaising with QA / QC Engineers to ensure they are aligned with the requirements of the specification.
• Support during construction stage

Job / Skills Requirement:

• You should have a bachelor's degree in mechanical.
• You should have sound experience in mechanical systems in designing and installation works related to semiconductors, biopharma, laboratories, data centers, or process buildings.
• You should be familiar with both Singapore and Malaysia’s latest codes, standards, guidelines, regulations, and authorities requirements. Your familiarity with available equipment, modern technology, construction methods, and CAD/ BIM is an added advantage.
• You should be able to advise clients and engineers on project execution, supervising progress, and quality of work.
• Able to Travel/ Relocate

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Minimum Viable Product Studio (MVP Studio) of NUS Enterprise, Technology Transfer and Innovation, supports NUS startups in their prototyping journey by providing industry know-how and technical guidance in the productization of intellectual property. We are seeking a versatile mechanical design engineer with market-proven expertise in product design and development, to join our team as a Master Engineer (Mechanical Design).

As a Master Engineer (Mechanical Design), you will guide NUS startups through the mechanical design and development process. You will support the prototyping phase of NUS startups, including generating mechanical concept proposals and mechanical architecture, implementing detailed design using 3D modelling and 2D drawings, and ensuring full design integration at system level. You will collaborate closely with internal cross-functional teams and external vendors to deliver robust mechanical design solutions.

Duties and Responsibilities

Prototype Design & Development

• Generate mechanical concepts and provide mechanical architecture.
• Implement detailed design utilizing 3D modelling and 2D detailed drawings.
• Establish modular design and full product BOM structure.
• Create sub-assembly test plans and test reports.
• Ensure design robustness and full design integration at system level
• Collaborate with ID to implement human-centric styling solutions for mechanical designs.

Technical Advisor to NUS Startups for Mechanical Design & Development

• ​​​​​​​Facilitate startups in prototyping their mechanical designs.
• Provide technical guidance and design expertise throughout the development lifecycle.
• Collaborate effectively with internal team members, startups, NUS faculty members.
• Communicate technical concepts and solutions to non-technical team members and stakeholders.

Vendor Management

• Work with vendors on DFM for the required mechanical designs.
• Coordinate with vendors to ensure delivery timelines and quality standards are met.

Qualifications

• Bachelor’s degree/ Master’s degree in Mechanical Engineering.
• Market-proven mechanical 3D design experience in consumer products, automotive/industrial products, or medtech/healthtech instrumentation, with at least 12-15 years’ combined experience.
• Proficient in 3D CAD modelling, preferably in Pro-Engineer/Creo and Solidworks.
• Experience in casting, plastics molding, sheet metal design, and 3D printing.
• Advance geometrical dimensioning and tolerancing.
• Good knowledge in automation and mechanism design.
• CFD/flow simulation in analyzing flow/thermal characteristics.
• Completed and led at least 5 complete product design life cycle.
• Good knowledge in control systems.
• Strong troubleshooting skills at module and system levels.
• Proven team manager with excellent teamwork and collaboration skills, with the ability to mentor and guide startup teams

Job Description

-Contribute to high-quality research and development work in TCOMS laboratory through physical experiments including:

o design of scaled physical test models, such as maritime vessels, offshore rigs, marine renewable platforms, and aquaculture systems for testing in TCOMS Ocean Basin.

o generation of detailed design, production, assembly, and as-built drawings of test models.

o Work with a team of engineers and technicians on model fabrication and modification, calibration, instrumentation, and experimental setup.

o enhance the measurement of models? behaviour and response by use of appropriate sensors.

o document design processes, methodologies, and results.

o contribute to process enhancements for improved efficiency of research work.

-Perform research in the following areas:

o Offshore hydrodynamics

o Coastal Protection

o Loads, motions and response analysis of Marine & Offshore platforms and floating structures

o Fluid-structure interactions

· Collaborate with internal teams, affiliated research institutes and other relevant stakeholders in proposal preparation and submission.

-Any other duties as assigned by supervisor.

Job Requirements

-Bachelor's/Master's Degree in Civil Engineering, Mechanical Engineering, Marine Engineering, Offshore Engineering, or other related disciplines.

-Preferably 3 years of relevant research/industry experience with competent knowledge in some of the following areas:

o Offshore engineering, marine engineering, hydrodynamics, naval architecture.

-Prior knowledge in the following numerical methods/software/programming languages will be an advantage:

o CAD software such as SolidWorks, Rhino, AutoCAD

o Engineering tools such as WAMIT, SESAM and OrcaFlex

o Programming codes such as Python, MATLAB, or equivalent.

o StarCCM+, OpenFOAM

-Model experiments in wave flumes, wave tank or ocean basin.

-Good interpersonal and communications skills.

-Ability to adapt and work effectively as members of a team.

-Good command of written and spoken language.

-Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Summary:

• Salary up to $6000
• MNC company - stable revenue & perks
• Transport allowances
• Possess own vehicle
• Location: Pioneer
• 5 days work week
• Sales experience in precision engineering related products

Key Responsibilities:

• Develop new business opportunities & sales leads for revenue growth and customer retention
• Achieve sales targets and analyst current market trends and industry information
• Pitch, recommend and fulfil the requirement of customer in terms of products and services offered
• Work closely with the production, application and shipping team to ensure timely delivery and that all order requirements are met
• Attend problem and generate solution
• Other related ad hoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering or equivalent
• Sales experience in precision engineering related products
• Strong technical knowledge in CNC machines
• Possess own vehicle is a must

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845