JOB RESPONSIBILITY

• Responsible for building and facility services, system operations and maintenance program
• Ensure all the works are carried out safely and in accordance with safety work procedures
• Oversees the Building Automation System (BAS) and other systems within the BMS/BASCO/FRC room, including ensuring the smooth operation (within the acceptable limits and are run safely, effectively and economically) and timely rectification of the M&E equipment and responding to all alarms as part of the drive to achieve KPIs.
• Manage and assign Corrective Maintenance (CM) and Preventive Maintenance Work order (PM) using the CMMS (Computerized Maintenance Management System) to the maintenance staff accordingly.
• Lead the coordination and communication process of rectifying the faults between the maintenance staffs, vendors and contractors.
• Manage a team of technicians in attending to breakdown calls.
• Responsible to undertake maintenance program in accordance with the standards, all corporate policies and legislated regulations
• Develop working schedule / duty roster for the team.
• Ensure all building and facility systems are operational within the acceptable limits and are run safely, effectively and economically
• Responsible for conducting preventive and corrective maintenance program in accordance with the standards, all corporate policies and legislated regulations
• Liaison with OEM /system contractor for all building services & regularly solicit feedback from maintenance staff regarding fault status and feedback to users.
• Assists in Business Continuity, Emergency Operations and Exercises such as Fire Drill/Evacuation exercise, major equipment breakdowns, major power shutdown, disease outbreak and incidents where deemed to be of top priority. Activates Recall protocol for emergency situation.
• Provide feasible solution and coordinate with owners/users, consultants, vendors/contractors on engineering function requirement
• Conduct regular inspection of existing building equipment and its serviceability status
• Review service reports and escalate any finding or action that is required
• Assist in the Development, maintenance and the regular review and test of SOP/EOP
• Advice and lead the technical investigation / troubleshooting for rectification works
• Investigate and determine root cause of faults and report
• Prepare and submit regular reports to Management and Customer, with analytical findings and propose improvements.
• Provide training to technician /technical officers, and junior staff as necessary
• Undertake any ad hoc assignment requested or delegated by the AFM/FM as required for the operational needs
• Senior Grade level would have the below additional job responsibilities & deliverables:
  Participate in Ops Meeting and ensure follow-up items for BASCO issues (campus level) are closed in a timely manner.
  - Chairs BASCO Trade meetings with NUH Customer on a regular basis and to follow-up with delegation of tasks to ISS team to ensure completeness in follow-ups.
  - Lead the planning for BASCO coverage at assigned building and on campus wide for CERT requirements
  - Overall accountable for training and uplifting the competency and familiarity of BASCO team members on-site.
  - Target to reduce 15% month-on-month of Open RM items, by proposing practical solutions for customer to implement.
  - Perform on-boarding program for any new joiners to BASCO Team at NUH ISS. This can be done on a fixed-monthly frequency including existing staff as part of the refresher training.
  - Overall visibility & control of the BASCO team & performance at site. Key target is to hold internal bi-monthly meetings and foster camaraderie and team bonding among the team. Target is to establish full contractual compliant BASCO team and achieve 95% attendance rate.
  - Oversee and report the Emergency Recovery Equipment list at a cluster level and on a predefined frequency to ensure all equipment are operational functional and readiness.
  - Overall BASCO Lead during working / Shift Hours and leads in handling any key events / incidents, while working closely with other BASCO team members across the campus for manpower deployment, cross-support or coordination works.

JOB REQUIREMENT

• Degree in Mechanical Engineering / FM discipline with minimum 3 years experience; or Diploma in Mechanical Engineering / FM discipline with minimum 5 years of relevant experience;
• Preferably minimum 2-3 years of working experience in a facility management environment in a hospital / clean room / pharmaceutical will be preferred.
• Pro-active, ability to prioritize work and achieve desired result
• Independent, able to work with minimum supervision and have a good understanding of critical workflow
• Able to communicate and write well in English and Mandarin
• Able to work on Monday to Friday (Shift 1) 0700-1600 Hrs (Shift 2) 1100-2000 Hrs; Saturday 830am to 1230pm.

Responsibilities:

- Review technical documents and work together with sales managers to close sales

- Prepare technical calculation and commercial proposal in timely manner

- Provides technical assistance to clients relating to the design and use of products

- Maintain good customer business relationship

- Coordinate with regional partners

- Provide support to Outside Sales and work closely to achieve the sales target

- Monitor and update status of sales quotes and proposals

- Various other sales related tasks as assigned.

Requirements:

- Diploma in Chemical/ Engineering/ Mechanical/ Mechatronics discipline or equivalent

- Good understanding in Mechanical Instrumentation & Controls or Valve Automation

- Good communication, interpersonal and customer service skills

- Willing to learn and a good team player

Job Description:

•Upkeeping test lab and adherence to the lab operational requirements in accordance to the Organisation Principle PQS

•Conduct testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)

•Conduct qualification test of new product or revised component with issuing of test report and recommendations to the test findings

•Develop test scripts, issues tracking and test management

•Prepare samples and coordinate with PQS EN or certification bodies for product certifications

•Manage annual notified body surveillance testing and follow up on non-conformance cases

•Support investigations of product failures

•Actively participate and manage projects to meet deadline

•Evaluation and analysis of competitors’ products – teardown analysis, VA/VE

Job Requirements

•Diploma/Degree in engineering with minimum 2 years of experience, preferably with working experiences in production quality or test lab environment

•Good hands-on skills in hand tools and able to handle installation of fixtures/machinery with weight up to 30kg

•Possess good knowledge in failure analysis of metals and materials related products

•Experience with testing or life cycle management tools an advantage

•Familiar with CAD software is preferable

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Familiar with AUTOCAD Software.

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.

Job Responsibilities:

• Develop and implement quality assurance plans, standards, and protocols for production or project management.
• Review project specifications and engineering drawings to establish quality standards.
• Ensure all work complies with relevant codes, ISO standards and regulations.
• Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database.
• Identify and document any quality issues, non-conformance and corrective actions.
• Providing guidance and advice to the Project Manager on significant changes to the quality management system with direct impact on site operations.
• Training the production team on quality control measures to improve product excellence.
• Collaborate with production, engineering and project management teams to identify and implement process improvements.
• Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements.
• Conduct root cause analysis for site level NCRs and recommend corrective action and preventive actions.
• Overall knowledge of safety policies and procedures to achieve safe work practices.

Requirements:

• Diploma /Degree in Engineering, Quality Management or related filed.
• Minimum 5 to 8 years of working experience quality assurance/control in industrial /equipment production or engineering projects would be advantageous.
• Proficient in quality inspection tools, data analysis and report writing.
• Up to date knowledge of federal and industry standards and best practices.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Excellent problem solving and analytical skills.
• Keen attention to detail.
• Willingness to travel for site inspections.
• Able to work independently and a good team player.
• Candidate who can start work within short notice or immediately would be advantageous.

As Hydroleap is growing and offering solutions to more clients within the existing verticals as well as the new verticals, we are looking for an enthusiastic, ambitious, and high-energy Automation Engineer who will be in charge of PLC programming, designing control panels, and implementing industrial and commercial electrical systems.

The Automation Engineer is responsible for the complete design of the electrical and control functions of new and retrofitted small to medium-sized control panels. In this role, you will be working closely with the rest of the engineering team in terms of process, and hardware design to translate control philosophies into a physical control panel containing PLCs and other electrical components. This role involves your presence in the office, factory as well as site.

What you will be doing

• Translation of process control philosophies into PLC/SCADA programs using one or more of the programming languages (i.e. ladder logic, function block, Sequential Function, Structured Text) and integrating different hardware components (i.e. pumps, sensors, valves, etc).
• Planning, organizing, troubleshooting issues, and managing project and electrical activities in close coordination with engineers, supervisors, and manufacturers.
• Installation, testing, FAT, SAT, and commissioning of control panels and distribution systems on sites.
• Preparation of risk assessment, and HSE for each project.

Your Capabilities and Credentials

• 7 years of experience in PLC and HMI programming projects
• Experience in remote monitoring and data logging.
• Licensed as a professional engineer.
• Experience in CAD or other 3D software

The purpose of this job is to assist the Company with the quality assurance activities on an ongoing basis. The role entails a variety of responsibilities, such as:

• Perform incoming material (e.g. cement, sand, etc), in-process and outgoing materials(UHPC Quality Mix) inspection activities according to the QAQC procedures and plans to ensure compliance with ISO and in-house standards.
• Operate and maintain QAQC laboratory equipment properties (e.g., TGA, BET, PSA, SEM, XRD, sieve analysis) to ensure optimal performance for analysing material, manage the safe storage of hazardous materials, and assist with periodic quality audits.
• Preparation of sampling list for weekly production and maintain the consumables inventory item at laboratory.
• Collect samples for incoming raw material quality checks.
• Manage retention samples, including proper labelling and organized storage.
• Maintain laboratory premises and equipment in accordance with the Company’s standards.
• File & maintain product inspection records.
• Perform 5S and laboratory housekeeping.
• Support the company’s research and development initiatives.
• Execute any additional duties or ad hoc tasks as assigned.
• Strictly adhere to safety standards in all activities to ensure a safe working environment for all.

• Assists the Project Manager in managing and supervising the execution of production works and ensuring the delivery of assigned projects
• Assists the Project Manager in planning and prioritising the order of works and work methodology
• Liaises with the project team to allocate adequate manpower and equipment resources
• Monitors work progress on board vessels and in workshops
• Conducts production meetings between Yard’s subcontractors, supervisor and ship’s staff to clarify work scope, co-ordinate sequence of work, update schedules and other contractual matters, as and when required
• Ensures works are carried out according to the job specifications in terms of quantity, quality and meeting Class/Owner requirements by developing test plans and arranging for inspection and survey for the Superintendents and Classification
• Completes the process of mechanical completion and commissioning scope of work
• Any other associated tasks and responsibilities assigned from time to time

Requirements:

• Bachelor's Degree in Marine Engineering, Shipbuilding, Naval Architecture, Mechanical Engineering or relevant apprenticeship training in a marine trade
• Knowledge of various workshops dealing with specialised works in the industry
• Able to perform scheduled night duties when required
• Attend to vessel’s needs during weekends and public holidays
• Travel within the country or abroad for ship check
• Good knowledge of marine industry skills in any discipline
• Knowledge in Hull,Mechanical, Piping & Electrical will be advantageous
• Good planning,organization, control, problem-solving, interpersonal and communication skills
• Good knowledge of project management software and other planning softwares

Our Address:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Our Working Hours:

Mon – Thurs: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description & Requirements

Candidate must possess at least Diploma/ Dgree in Engineering (Electrical)

• Preferable with 2 Year(s) of working experience in the related field is required for this position.
• Entry level candidates are welcome to apply.
• Preferably Junior Executive specialized in Engineering - Electrical or equivalent.
• 6 days work week.
• Good interpersonal and communication skills.
• Rotating shift

Responsibilities:

• Responsible for all works related to Project Engineer duties
• Able to prepare shop drawings, as built drawings of electrical services
• Able to visualize site condition and make necessary proposal
• Will need to assist in other department

Job Description Summary

All activities relating to enhancing services technology integrating customer data, or capturing engines/products reliability, availability, maintenance, safety and other performance parameters. Includes hourly, nonexempt and exempt employees as well as manager roles responsible solely for these activities. Impacts departmental operations and responsible for planning/execution. The role has some autonomy but is focused on execution of activities within an operating discipline covered by standard functional practices and procedures. Some judgment may be required but this is typically with guidance.

Roles and Responsibilities

• Development of repair and inspection technologies, process qualification, industrialization. Related program deliverables to repair facilities for new and updated processes.
• Developing in-depth knowledge of a technical discipline. Uses prior experience and acquired technical expertise to execute policy/strategy.
• In-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area.
• Uses some level of judgment and has ability to propose different solutions outside of set parameters but with guidance. Uses prior experience and on-the-job training to solve straightforward tasks. Has access to technical skills and analytic thinking required to solve problems. May use multiple internal sources outside of own team to arrive at decisions.
• A job at this level is likely to be an individual contributor with proven interpersonal skills or an early people leader who can hire and develop talent. Provides informal guidance to new team members

Required Qualifications

• Advanced experience in the Engineering/Technology & Repair Development. Knowledge level is comparable to a Bachelor's degree from an accredited university or college ( or a high school diploma with relevant experience).

JOB DUTIES :

• Design precision plastic injection molds according to requirements.
• Construct design layout and mold design review meeting.
• Communicate with customers in conference calls and on-site design meeting.
• Perform other duties as assigned.
• Required to develop junior engineers.

EXPERIENCE REQUIRED:

• Minimum 7 years relevant working experience
• Minimum Diploma in precision/ mechanical/ manufacturing engineering.
• Proficient in Siemens NX software and Microsoft office applications
• Strong leadership skills. Has positive attitude towards work and eager to learn new skills

Supporting the Mechanical maintenance team, you will be responsible for the effective maintenance plant and equipment to achieve high reliability and availability in accordance with statutory, regulatory and safety requirement.

Responsibilities

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• Responsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs
• Track the year to date expenditure against the approved department budget
• Manage a team effectively through day-to-day activities.

Requirements

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board.
• At least 15 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries.
• Sound Mechanical engineering maintenance knowledge. Good knowledge of safety and statutory requirement will be an advantage.
• Self-motivated team player with analytical mind, strong planning and problem solving skills.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Job Descriptions:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist for tender team.
• Research on the application and construction technology of new materials.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Calculation and design optimization of offshore photovoltaic structures.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Report on work progress during meetings.

Job Requirements:

• Preferably with a Degree in Engineering or related studies.
• Tender experience is preferable.
• Minimum 6 years of design engineering experience.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Act as team player.

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Position Overview

We are seeking a dedicated and detail-oriented Quality Assurance Specialist to assist our Quality Assurance Manager. The successful candidate will be responsible for performing a full spectrum of quality-related activities and developing/reviewing quality and inspection plans

Education / Certificates

Degree in Engineering, Science, or a related field.

Job Responsibilities

• Conduct First Article Inspection (FAI), Dedicated Product Release Verification, and material review.
• Develop and review quality and inspection plans.
• Manage quality-related activities with customers and internal staff, including handling customer rejects, product defects, and non-conforming materials.
• Perform product and system audits for both in-house and vendor operations.
• Participate in continual improvement initiatives.
• Perform other duties and responsibilities as assigned

Requirements

• Minimum of 2 years of experience in Quality Management.
• Knowledge of AS 9100 / ISO 9001 Quality Management System requirements.
• Proficiency in Geometric Dimensioning & Tolerancing.
• Experience with product inspection methods.
• Knowledge of Coordinate Measuring Machine (CMM) applications is an advantage.
• Strong understanding of Quality Statistical Tools and Methodologies such as Cpk, SPC, GR&R, and Six Sigma tools.
• Proficient in writing quality manuals and procedures.
• Ability to lead and/or perform Internal Audits.

Responsibilities:

• Design, develop, and optimize backend systems for MLOps workflows on our compute cloud platform.
• Build and maintain scalable, secure, and high-performance API services to support ML model training, deployment, and monitoring.
• Develop and integrate orchestration systems for managing AI workloads and containerized environments.
• Implement automated model lifecycle management, including versioning, monitoring, and retraining workflows.
• Collaborate with DevOps and infrastructure teams to ensure seamless deployment, scalability, and reliability of cloud-based AI workloads.
• Enhance logging, monitoring, and alerting systems for ML infrastructure performance tracking.
• Optimize resource allocation and scheduling strategies for distributed AI training and inference tasks.
• Work with AI researchers and engineers to streamline ML model deployment and inference pipelines.

Requirements:

• Bachelor's or higher degree in Computer Science, Software Engineering, or a related field.
• Strong programming skills in Python, with experience in backend development.
• Experience with cloud computing platforms (e.g., Kubernetes, Docker, AWS, GCP, or Azure).
• Proficiency in MLOps tools and frameworks (e.g., MLflow, Kubeflow, Airflow, Ray, or Argo Workflows).
• Solid understanding of distributed systems, microservices architecture, and API design.
• Hands-on experience with database technologies (SQL and NoSQL).
• Knowledge of infrastructure-as-code (e.g., Terraform, Ansible) and CI/CD pipelines.
• Familiarity with GPU acceleration frameworks (CUDA, NCCL) is a plus.
• Strong problem-solving skills and the ability to work in a fast-paced, collaborative environment.

Preferred Qualifications:

• Experience in AI/ML model deployment and serving (e.g., TensorFlow Serving, TorchServe, Triton Inference Server).
• Background in optimizing resource utilization for large-scale AI workloads.
• Knowledge of network and security best practices for cloud-based AI systems.
• Contributions to open-source MLOps projects are a plus.

WAGO Group is an international, standard-setting supplier of electrical interconnection, automation, and electronic interface products and solutions. This family-run company is the world market leader in spring pressure connection technology. Whether in industrial, railway, or energy technologies, in the marine and offshore sectors, or building and lighting management, WAGO products and solutions provide safety and efficiency.

WAGO has been represented in Singapore with a wholly owned subsidiary for over 25 years and has a well-established local infrastructure.

WAGO started setting up an R&D Competence Center in Singapore in 2023 to better cope with the rising global market demand. The new R&D Competence Center operates within the already existing infrastructure in Singapore.

The new R&D Competence Center in Singapore focuses on the business areas of sensor technology and power electronics, which serve the industry, energy, building, and green mobility sectors.

We are looking for someone who enjoys and has experience in the mechanical design of industrial electronic products.

Roles & Responsibilities

• Responsible for planning, conceptualizing, and creating mechanical designs for electronics and power electronics products.
• Create and review technical drawings, plans, and specifications using Siemens NX.
• Collaborate with multi-disciplinary engineering teams to complete design for manufacturing (DFM) and design for assembly (DFA).
• Work with vendors and contractors efficiently to ensure timely completion of deliverables.
• Conduct thermal simulation and analysis using industrial software for development.
• Generate working prototypes for beta testing and customer demonstration, including 3D printing.
• Develop prototype testing processes, and perform testing and verification of new designs.
• Perform detailed documentation to track project development and design process.
• Manage BOM creation and maintenance within the PLM (Product Lifecycle Management) system.
• Ensure the project timeline is met and the project stays within budget.

Qualifications & Competences

• Bachelor's degree in mechanical engineering, or related technical discipline.
• Minimum of 5 years of relevant work experience.
• Sound knowledge of GD&T (Geometric dimensioning and tolerancing)
• Extensive experience using CAD software such as Siemens NX, Creo, or similar.
• Familiar with state-of-the-art 3D printing technology for prototyping purpose.
• Experience and knowledge of Industrial Design (ID) would be an advantage.
• Knowledge of FEA (Finite Element Analysis) would be an advantage.
• Knowledge and experience with special plastic molding techniques, especially overmolding or ultrasonic welding, would be an advantage.
• Ability to communicate effectively and clearly.
• Self-motivated and a great team player.

What can we offer:

• Exciting and diversified duties and responsibilities await you within a dynamic, international company environment that is experiencing sustainable growth.
• We provide you with a platform where you can further develop your passion and technical competence and onboard an exciting industry, and market-oriented career.
• We offer you an attractive, performance-related payment package. We focus on an efficient, process-oriented organization, where the individual responsibility and self-organization of our employees as ‘entrepreneurs within the company’ are particularly advanced.
• The company is one of the globally leading players in the connection and automation technology space offering to its customers innovative high-tech solutions.

WAGO Group is an international, standard-setting supplier of electrical interconnection, automation, and electronic interface products and solutions. This family-run company is the world market leader in spring pressure connection technology. Whether in industrial, railway, or energy technologies, in the marine and offshore sectors, or building and lighting management, WAGO products and solutions provide safety and efficiency.

WAGO has been represented in Singapore with a wholly owned subsidiary for over 25 years and has a well-established local infrastructure.

WAGO started setting up an R&D Competence Center in Singapore in 2023 to better cope with the rising global market demand. The new R&D Competence Center operates within the already existing infrastructure in Singapore.

The new R&D Competence Center in Singapore focuses on the business areas of sensor technology and power electronics, which serve the industry, energy, building, and green mobility sectors.

We are looking for someone who enjoys and has experience in the PCB layout design of industrial electronic products.

Roles & Responsibilities

• Support hardware developers on board schematic capture fulfilling design requirements.
• Responsibility for PCB layout in Cadence Allegro.
• Manage the layout design review prior to design release.
• Prepare and release all PCB documentation, and ensure the project timeline is met.
• CAD library administration including symbol, footprint generation and database administration.
• Creation of components’ and PCBAs’ 3D models and liaising with Mechanical Design Engineers on design constraints.
• Liaise with PCB manufacturers to clarify design requirements and resolve problem encountered.
• Liaise with Process Engineers of the product factory to clarify design requirements and resolve problems encountered during PCB assemblies.

Qualifications & Competences

• Minimum Degree/ Diploma in Electrical/ Electronic Engineering with 5 years working experiences in PCB layout design
• Knowledge in Cadence Allegro, Altium or any other electronics design software
• Experience in high speed, mixed signal, power and RF board design would be an advantage
• Sound knowledge of IPC-2221
• Good interpersonal skills to work with team members
• Self-motivated and able to work independently and efficiently

What can we offer

• Exciting and diverse duties and responsibilities await you within a dynamic international company environment experiencing sustainable growth.
• We provide you with a platform where you can further develop your passion and technical competence and onboard an exciting industry, and market-oriented career.
• We offer you an attractive, performance-related payment package. We focus on an efficient, process-oriented organization, where the individual responsibility and self-organization of our employees as ‘entrepreneurs within the company’ are particularly advanced.
• The company is one of the globally leading players in the connection and automation technology space offering to its customers innovative high-tech solutions.

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Familiar with AUTOCAD Software.

Nitec, Diploma in IT/Computing or Bachelor Degree related certification and above

minimum 1-year working experience in IT

Looking for a long-term career in an IT environment

Must have a passion for IT technology

Preparation of IT documentation, reports, and IT administrative tasks

Good at conducting research

5.5 workday (Mon - Fri 9am to 6pm, Sat 9am - 1pm)

Weekend (Public Holiday Standby)

Short courses will be provided

* No experience or fresh Grad are welcome too.

- Designing electrical system

- Ensure designs meet industry standards and regulations

- Knowledge of design techniques

- Prepare technical documentation and reports

- Responsible for producing schematic drawings

- Proficiency in electrical design software (e.g., AutoCAD, Solidwork)

- Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.

- Assist and collaborate with other project team members to comply with project requirements and meet project schedules

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Overall Job Purpose

Responsible for configuring, implementing, and maintaining Project AVEVA Net/AIM and ISM instances. The incumbent will play a pivotal role in Project data capture, verification, and handover.

Core Responsibilities

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system deployed on all MODEC

• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.

• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.

• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.

• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.

• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.

• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status

• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.

• Shall be capable of developing work instructions for users of AVEVA NET.

• Must understand company goals and implement management directives and policies.

• Anticipate potential problems and take preventive actions.

• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.

• Shall train the MODEC users on the AVEVA NET application in projects.

• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives when

• Contribute to continuous improvement of company work methodology/procedures.

• Conclude all open issues amicably.

Educational Qualification:

Certification(s):

• Training in AVEVA NET administration

Relevant Experience:

a) 5-10 years’ experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).

b) AVEVA NET/AIM and AVEVA ISM administration and implementation.

c) Be fully proficient in exception handling between the AVEVA system with associated Gateways and the Client system

d) Have extensive knowledge of AVEVA registers gateway interface with Client system

e) Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.

f) Have previous experience in engineering information management.

g) Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.

h) Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.

i) Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

j) Shows evidence of good organizational skills.

k) Demonstrates ability to take the lead.

l) Good communication skills.

m) Commitment to take responsibility.

• Provide technical advice to customers on pumps related inquiries.
• Selection of pumps based on the specification given by customers.
• Provide coordination support to Sales Engineers.
• Handle sales process from quotation to finished goods delivery.
• Handle walk-in customers.
• Work closely with customers and maintain good business relations.

Job Requirements:

• Min. Diploma in Mechanical Engineering or any Engineering background.
• A Meticulous and fast learner with good communication skills.
• Experience in pump industry is a plus.
• Fresh graduates are welcome to apply.