Responsibilities

• Liaise with client/contractor/sub-contractors on project related matters to ensure to smooth execution of site work.
• Liaise with suppliers and sub-subcontractors for arrangement of materials, equipment, tools and other sub-contracting work activities
• Ensure the installation works are done according to approved shop drawings, method statements, Project Quality Plan, Project Specifications and relevant standards
• Assist Site / Project Manager in handling and monitoring the project progress
• Involve in conceptual and detailed design of electrical / instrumentation engineering works
• Ensure that only current version of documents (contract specifications, electrical and instrumentation drawings, materials submittal, method statement and risk assessment) are accessible at the point of use
• Review and checking of technical vendor submittals for installation requirements
• Attend regular site meetings with client/contractors/sub-contractors on project related matters
• Prepare and submit site progress report and necessary project documents which may include progress claim, variation order, method statement, risk assessment and inspection request
• Review the nature of non-conformities detected in product / work and determine the disposition of the non -conformities
• Conduct site survey, update and advise the site status
• Assist in validation (certification) of subcontractor progress claim
• Resolve technical issues related to installation, commissioning and testing
• Assist in tender administration work, if require
• Assist in timely hand-over (delivery) of project, within budget while maintaining high quality standard at optimum cost (cost effectiveness)
• Prepare project Quality Plan if require
• Prepare the bill of material and keep it updated regularly
• Raise the purchase requisition for the material and services required at project site
• Follow up with suppliers and timely delivery of material in line with project schedule.
• Keep the records of marked up drawings for as built documentation throughout the project
• Keep the records of material received from supplier and issued for installation

Qualifications and Work Experience

• Diploma or ITE graduated in relevant engineering and minimum 2 years of relevant working experience or
• GCE ‘O” or Nitec holders in relevant engineering and minimum 3 years of relevant working experience
• Strong knowledge of health, safety and environmental regulations
• Capable of reading electrical drawings and schematics
• Good interpersonal, planning, analytical and problem-solving skill
• Able to work independently
• Knowledge in BIM / AutoCAD skills will be an advantage
• Good oral and written communication skills
• Good Microsoft office knowledge and skills

The computer vision / image processing engineer is responsible for developing and implementing algorithms and software tools to process and analyse images for various object detection applications from multiple real-time mission-critical image sources, such as electro-optical, thermal imaging sensors and other sensors.

The job scope includes:

• Research various imaging systems and validate them.
• Using optical metrology techniques, calculate and calibrate cameras for outdoor real-time mission-critical applications
• Designing and testing image processing systems and components, such as filters, edge detectors, feature extractors, classifiers, etc
• Optimising the performance and accuracy of image processing algorithms using techniques such as parallel computing, machine learning, deep learning, etc
• Collaborating with other data scientists, engineers, researchers, and clients to understand the requirements and specifications of image-processing projects
• Document and present the results and findings of image processing experiments and analyses

Requirements:

• A bachelor's degree or higher in computer science, physics, mathematics or a related field
• Experience in image processing and/or computer vision, preferably outdoor systems
• Deep understanding of the imaging systems' sensor characteristics, optical metrology techniques and image signal processing
• Hands-on experience in the image processing pipeline. (Zoom and focus, auto white balance, camera colour conversion, colour space and colour management, etc.)
• Expertise in identifying diverse colour issues within intricate ISP systems and in precision tuning of parameters to achieve optimal image quality
• Knowledge of mathematical modelling, statistical analysis and image processing techniques. (Kalman filtering etc.)
• Proficiency in Python, C++, MATLAB or other programming languages
• Familiarity with popular frameworks and libraries for image processing and machine learning, such as OpenCV, TensorFlow, PyTorch, scikit-image or PIL
• Ability to work independently and as part of a team
• Excellent communication and problem-solving skills

Responsibilities

• Manage and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data
• Assess potential risks, materials and costs
• Provide advice and resolve creatively any emerging problems/deficiencies
• Handle over the resulting structures and services for use
• Monitor progress and compile reports in project status
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

Requirements and skills

• Proficient in Microsoft Office
• Degree Civil & Structures Engineering discipline
• Possess good leadership, planning and decision-making skills
• Possess good communication and interpersonal skills
• Possess positive, responsible and self-motivated attitude
• Able to work in a team
• Other Ad-hoc related duties assigned by the company.

• Managing the planning and design stages of construction projects.

• Contributing technical expertise to project drawings and designs.

• Performing cost calculations and preparing financial projections.

• Preparing work schedules in collaboration with the project manager.

• Liaising between contractors, subcontractors, vendors, and suppliers.

• Overseeing construction engineering processes.

• Performing regular tests on materials and procedures to ensure compliance with industry regulations.

• Ensuring that the construction project is completed on time and within budget.

• Documenting processes and keeping detailed construction logs.

• Presenting construction project progress updates to clients and senior managers.

Job Description & Requirements

Working for Excelpoint

You will be given the opportunity to be exposed to a wide range of services, industries, clients, products, regions and nationalities. The career growth of each employee and the success of Excelpoint are of utmost importance to them. We are happy, excited and proud to see our people pave their successful careers in the company as we have the best people in the industry. Through our products, services and innovative solutions, many principals, clients and customers are positively benefited by our energetic and committed teams. Join us today if you are ready to “Empowering Future Technology.”

Our People in Excelpoint

We believe in a diverse & inclusive workplace thus our employees come from various cultures and ethnic backgrounds around the world. Our mindset is to value-adding in every piece of work that we do for our stakeholders. We work in collaboration among all with great passion, trust, commitment and integrity at the highest level of conduct and ethics. We strive towards digitalization and innovative work solutions.

As a successful candidate, you will:

· Be responsible for creating business opportunities with potential customers in Singapore and ASEAN region

· Provide technical support to customers throughout the R&D cycle till completion

· Drive design win and demand creation revenue for the company

· Conduct technical product training for internal/external customers

You are likely to be:

· Degree in Electronics or Electrical Engineering or equivalent

· Minimum 3 years of FAE working experience in a semiconductor distributor or manufacturer environment

· Demonstrate strong technical proficiency in Microcontrollers, Power management and Analog systems

· Previous involvement in a semiconductor distributor or research and development (R&D) environment, especially with hands-on experience in Microcontroller and Power design is an added advantage

· Capable of working both independently and as a collaborative team player

· Good command of English, communication and interpersonal skills

· Ability to travel for business trip

[What you will be working on]

In addition to your teaching duties, you will carry out industry or consultancy projects to help you remain relevant in your profession and to evolving changes in industry, and maintain strong linkages with industry and schools. You will also have the opportunity to have industry attachments or experience on a regular basis to update your skills, knowledge and practices of your profession.

[What we are looking for]

You should be trained in Chemical Engineering, Chemical Process Technology, Process Instrumentation or related disciplines. You should have at least 3 years of working experience in process plants, preferably in the petroleum, petrochemical, pharmaceutical, chemical or process instrumentation industry. You should also have good hands-on knowledge in

- plant operations;
- process instrumentation and control;
- plant reliability and maintenance; or
- safety and environmental engineering.

Those with good and relevant experience can look forward to Senior Lecturer or equivalent positions, with careerdevelopment opportunities to leadership positions in the Colleges or Headquarters.

Applicants may check their application status at the end of 8 weeks from the closing date of this job posting.

• Managing the planning and design stages of construction projects.

• Contributing technical expertise to project drawings and designs.

• Performing cost calculations and preparing financial projections.

• Preparing work schedules in collaboration with the project manager.

• Liaising between contractors, subcontractors, vendors, and suppliers.

• Overseeing construction engineering processes.

• Performing regular tests on materials and procedures to ensure compliance with industry regulations.

• Ensuring that the construction project is completed on time and within budget.

• Documenting processes and keeping detailed construction logs.

• Presenting construction project progress updates to clients and senior managers.

To assist the Project Manager/ Site Manager and ensure that the site activities are executed in accordance with time schedules

- Supervise and coordinate day to day site works, safety and quality control

- Monitor & coordinate the site works, materials, plant & equipment with site supervisors

- Coordinate with the Sub contractor / MainCon / Consultant / Client for whatever revision on drawings & in actual construction & submit weekly site works progress report.

- Assist in planning, programming and monitoring of construction works progress

- To study tender / construction drawings, specifications and contracts to understand project requirements

- Check drawings and raise technical queries to resolve the discrepancies in between drawings and as well as those arisen during the project execution

- To ensure structural work & architectural work done according to the drawing

- To carry out short-term planning to meet site progress and involve in client/consultant/sub-contractor meetings

- Manage and ensure timely completion of construction/ civil works

- Identify and assess any foreseeable risk arising from the workplace or work

processes, minimise environmental impact associated with the construction activities

- Take reasonable practical measures to eliminate any foreseeable risk to any person who is at the workplace

- Ensure safe work procedures and environmental control measures are implemented at the work site and quality records are properly maintained

- Undertake any other work duties as required by the Company

Responsibilities:

• Establish a framework for necessary contributions from various departments and facilitate their collaboration
• Document and monitor Autonomous Vehicle system testing outcomes and establish steps to remedy problems
• Analyze current technologies used within the company and develop steps and processes to improve testing procedures
• Detailed understanding of how to properly document test cases and create effective and focused testing plans
• Assist other department engineers in creating practical demonstrations of proposed solutions and demonstrating them to other members of the team
• Work closely with departments within the company to ensure hardware is available for projects and working properly
• Provide detailed specifications for proposed solutions including time and scope involved
• Define clear goals for all aspects of AV product test and develop steps for their proper execution
• Develop supporting tools for system testing, deployment, maintenance

Requirements:

• Experience in software/system development and testing
• Project management skills are useful in planning and overseeing project tests
• Current understanding of best practices regarding system safety and security
• Experience with systems engineering, customer experience and design architecture
• Ability to work with various departments to facilitate the orderly execution of a proposed test plan and solve the technical issues with developers
• Knowledge of testing methodologies and when certain strategies are recommended
• Knowledge and experience working with various operating systems (Ubuntu and Windows), backend programming and project management tools (Jira or equivalent)
• Professional work experience in analyzing and testing computer hardware/software
• Programming skill (Python, C++ and etc) for tools development
• Valid Singapore Class 3 driving license

Understanding and carrying out all tasks given by the Senior Engineer.

Collaborating with other engineers and workers to design, develop, test, and improve products and engineering processes.

Ensuring all expenses stay within the allocated budget.

Performing regular inspections of equipment and scheduling maintenance or repairs.

Providing assistance to different staff or engineering teams.

Inspecting inventory and reporting inconsistencies as well as ordering more materials.

Producing CAD drawings according to specifications.

Evaluating all products and processes and ensuring standardization of quality assurance measures.

Participating in various learning experiences, which may include attending workshops and training sessions.

Calibrating and troubleshooting equipment as required.

Job Title: Senior Software Quality Engineer (1 year contract) (ID1409)
Location: Customer Site
Working Hours: Mon to Fri 9am to 6pm
Salary: $7000 to $8000


Job Description
• Expertise in Test lifecycle including Requirement Analysis, Identifying Test Scope, Designing Test cases, Executing Test cases, and Tracking defects till closure
• Able to define and create test deliverables such as Test Cases and Test Data
• Experience in various test phases such as End to End Functional Testing, Regression Testing, Integration Testing, System Testing
• Have worked in both Waterfall and Agile project models
• Expertise in Defect Management and Tracking
• Plan and manage test environment and data

Requirements:
• Functional tester with minimum of 7-10 years’ experience in financial services domain
• Experience in Equities or Derivatives trading with comprehensive understanding of Futures and Options products
• Knowledge of End-to-End Trade Lifecycle including Order and Trade Management, Risk Management, Post Trade workflows, Margin and Collateral Management, Settlements etc.
• Expertise in usage of test management, system measurements and message latency measurement tools such as ALM, JIRA, qTest
• Working knowledge of proprietary or industry standard tools such as Tosca, Verifix, UFT, Selenium etc.
• Testing experience with Industry standard APIs used in Financial Services domain (e.g. FIX, SWIFT)
• Hands-on test automation experience on any industry standard tool is a plus
• Experience of static and dynamic test data set up for Functional, System, SIT and Regression Testing
• Ability to communicate clearly both in writing and verbally
• Complete Team player with a collaborative mind-set
• Strong analytical skills and proven problem-solving ability

• They manage parts of a construction project, providing technical advice to subcontractors, supervising staff on site and ensuring that their packages are completed on time, in line with legal guidelines and within budget.
• Job Requirements:
• Bachelor's degree in civil or structural engineering, construction, building, or related field
• State-issued certification or engineering license
• Considerable experience in a similar position
• In-depth knowledge of engineering, technology, building, construction, and design
• Proficient in the use of computer-aided design (CAD) software
• Familiar with scientific analysis software as well as graphics and map creation software
• Proven track record of managing personnel and material resources
• Exemplary critical thinking, analytical, and complex problem-solving skills
• Strong time management and project management skills
• Active listening and verbal communication skills
• Dedication to learning new concepts and strategies

Permanent Facilities Engineer position

Salary: up to $5000

overseeing overall building maintenance and security operation for all Central Offices, includes conducting inspection, coordinating maintenance/ improvement programs and projects, compile data for reporting and forecasting future needs and costs

Assist in operations and implementation of facilities management programmes, including formulating programmes relating to routine and periodic maintenance works, plan and implement the cyclical replacement/ enhancement works for all Central Offices

• Support Manager for preparation of operation and capital budget, monitoring and control to ensure completion within time and cost objectives.

• Assist in contract administration and management, including calling, evaluation, negotiation and award recommendation of tenders/ quotations.

• Support the effective planning and management of activities of outsourced service partners, providing supervision and controlling their performance

• Coordinate with internal associate engineers and the appointed managing agent to ensure maintenance of all systems are being carried out according to plan and contracted scope of work and manage facilities related to timely repair and replacement work.

• Assist to investigate, develop and implement solutions, trouble shoot on day to day operational problems of facilities and building.

• Assist to develop and implement policies, protocol and procedures to maintain full compliance with the prevailing legislative acts and regulatory requirements.

• Conduct periodical quality control inspections at all Central Offices for potential safety hazards and unsafe conditions, initiate corrective measures to maintain a secure, safe and healthy work environment

• Attend to all emergency/crisis on and off hours and provide a timely response to incidents as they arise and assist in emergency management and contingency planning.

• Assist in internal and external audits.

Requirements

• Diploma/ Degree in Electrical/ Mechanical/ Facilities Management/ equivalent with 4-5 years experience
• Well versed in all facets of facilities management with general knowledge of all real estate functions including planning, development, asset management and project management.

To apply

Please email Resume in Microsoft Word format

Please state your Position/ positions applied on the “on TOP” of your resume.

Please state Available Commencement Date or notice period

Please state current and last SALARY and Expected Salary in your resume.

Please state Reasons for leaving current & previous Employment.

Why Patients Need You

Pfizer’s Environmental, Health and Safety team is critical to ensuring the highest safety standards are met for our patients and our colleagues. You will be part of an innovative community dedicated to delivering excellence which enables Pfizer to get our medicines in the hands of the people who need them most more efficiently, and safer, than ever before."

What You Will Achieve

• Will be responsible for consolidating and developing Major Hazard Installations (MHI) safety case to ensure compliance of all applicable laws and regulations, codes of practices and Global EHS Standards to support API plant operations not limited to essential programs like Process Safety Management (PSM), Workplace Safety & Health, Mechanical Engineering, Electrical, Control & Instrumentation, Human Factors, Emergency Response, ALARP, Audit, Incident Investigation and cGMP
• Accountable for
  • Compliance with all applicable codes of practice, local MHI regulations and Global EHS Standards
  • Onsite safety goals / objectives
  • Process safety performance leading indicators and metrics for continual improvement
  • Knowledge management of PSM (Process Safety Management) 

How You Will Achieve It

• Organize, manage and submit process safety documentation to the respective regulatory agency.
• Comply with the regulatory requirements of “safety case” report.
• Develop and review Major Accident Prevention Policy and Health & Safety Management System with guidance from Process Safety Manager or EHS Team Leader.
• Manage and consolidate technical assessments on predictive, process safety, mechanical engineering, electrical control & instrumentation, human factors, emergency response and ALARP.
• Plan and prepare for compliance audits according to the requirements of all applicable codes of practice, local Major Hazard Installations (MHI) regulations and Global EHS Standards. 
• Work with minimal guidance from Process Safety Manager or in partnership to review the work processes of process safety hazard identification & risk controls, major accident scenarios, process hazard analysis, incident investigation and management of change, and identify areas for improvement to enhance the robustness of these processes.
• Maintain and upkeep documentation and records of PSM programs and/or safety case in the state of readiness for compliance inspection and/or audits.
• Consolidate and develop process safety awareness training package. In partnership with Process Safety Manager to conduct the training for colleagues onsite.
• Organize and facilitate PHA (HAZOP Studies) and PHA revalidation and complete all relevant in a timely manner

Qualifications

Must-Have

• Bachelor degree in chemicals / process safety / mechanical / environmental engineering or science (pharmaceutical or chemistry).
• Technical know-how in process safety engineering, QRA, or PHA is essential
• 5 Years relevant experience within the pharmaceutical API or related industries; incumbent as technical role with good knowledge of dispersion modelling, QRA is advantageous.
• Good knowledge and application of stipulated codes of practice (e.g.ANSI/ISA-18.2-2009, SS506 part 3, API510, Singapore Fire Safety Act)  is advantageous

Nice-to-Have

• Experience working in manufacturing environment, with Good Manufacturing Practices {also cGMP} or Information Security Officer

Pfizer is an equal opportunity employer and complies with all applicable equal employment opportunity legislation in each jurisdiction in which it operates.

Who we are

We are a boutique management consulting firm offering Business Consulting, Advisory, and Technology services to our banking clients in the wealth space. We partner with our clients on large transformation projects and act as their delivery partners.

We are building a competency center with a high-potential team with niche skill sets. Our focus is to bring together, a diverse talent pool that will create perfect synergy in delivering the best possible solutions for the projects we undertake. We also aspire to provide an inclusive workplace where fresh talent can grow and achieve their full potential.

Job Description

The candidate must have 5+ years of experience in a Data Engineer role with a degree in Computer Science, Informatics, Information systems or similar fields.

Key responsibilities include:

· Designing and building scalable data pipelines to extract, transform, and load data from a variety of sources.

· Maintaining and optimizing existing data pipelines and automating data workflows such as data ingestion, aggregation, and ETL processing.

· Working with data analysts in Fintech space to understand data needs and design appropriate data models.

· Collaborating with cross-functional teams to integrate data pipelines with other systems.

· Ensure data accuracy, integrity, privacy, security, and compliance through quality control procedures.

· Monitor data systems performance and implement optimization strategies.

Minimum Qualifications:

· Strong development experience in at least two or more of the following languages: Python, Java, Scala, Go.

· Experience with working on large data sets and distributed computing in Enterprise using technologies like Hadoop, Spark, Hive, Kafka, etc.

· Proficient with building data pipelines and workflow management tools. Should have worked on Airflow, Nifi or related tools.

· Working knowledge of message queuing, stream processing systems like Kafka, Spark Streaming.

· Hands on experience working with NoSQL databases (like Cassandra, MongoDB, or Neo4j) and relational databases (like MySQL, PostgreSQL, or Oracle)

· Experience with data visualization tools like Tableau, Superset, or similar tools.

· Working knowledge of data quality, data governance, and data security principles.

Good to have:

· Experience with data science and machine learning tools and libraries (e.g. scikit-learn, TensorFlow, PyTorch, etc.)

· Cloud computing experience (e.g. AWS, GCP, Azure)

· Cloudera Certified Professional Data Engineer, IBM Certified Data Engineer, or similar certifications.

· Must be aware of data privacy and security concerns and regulations (e.g. GDPR, CCPA, etc.)

Civil Engineer, Ducts & Manhole (indoor office-based)

Salary up to $5200

• To take charge of the Ducts and Manholes Implementation and Maintenance Works.

• To coordinate underground ducts and manholes implementation works with external parties.

• To support Plant Maintenance and Operation on Civil & Structural (C&S) matter

• C&S engineering SME

Responsibilities:

• New Development and Diversion of Services:

- Take charge and coordinate Service laying with main project team (Developer, Main Contractor) and authorities, including deconflicting with others for new build and diversion.

- Project Manage the implementation of underground ducts and Manholes within new development and service diversion.

- Review method statement and coordination drawings and other relevant construction documents.

• Review 3rd party submission on matters related to Netlink Underground Services

• Support Facilities and Maintenance team on Civil & Structural related issues.

• Participate in tender, contract administration

Requirements:

• Civil Engineering Degree with 3-year engineering/construction experience

• Diploma holders in Civil Engineering with extensive relevant experience will be considered

• Experience in infrastructure (Road works) projcts and its geotechnical aspects.

• Exposure in Service coordination with Authorities and Service providers

• Good understanding of Specifications, contracts and ability to read and interpret engineering drawings and engineering reports.

• Ablity to review Method statement. Ability to generate method statements is preferred.

To apply:

Please email Resume in Microsoft Word format

Please state your Position/ positions applied on the “on TOP” of your resume.

Please state Available Commencement Date or notice period

Please state current and last SALARY and Expected Salary in your resume.

Please state Reasons for leaving current & previous Employment.

Understanding and carrying out all tasks given by the Senior Engineer.

Collaborating with other engineers and workers to design, develop, test, and improve products and engineering processes.

Ensuring all expenses stay within the allocated budget.

Performing regular inspections of equipment and scheduling maintenance or repairs.

Providing assistance to different staff or engineering teams.

Inspecting inventory and reporting inconsistencies as well as ordering more materials.

Producing CAD drawings according to specifications.

Evaluating all products and processes and ensuring standardization of quality assurance measures.

Participating in various learning experiences, which may include attending workshops and training sessions.

Calibrating and troubleshooting equipment as required.

• Installation, configuration and site support Systems.
• Perform system testing, problem analysis, troubleshooting and to draw conclusions to the project team.
• Develop and implement project plans, risk assessments and contingency plans.
• Ensure timely project delivery to customers
• Project management
• Attend to site installation, configuration & troubleshooting
• Maintain proper documentation according to organizational policies and practices.
• Work with users to understand their problems or new requirements
• Other duties as assigned.

Requirement

• Min Diploma in Electrical and Electronics Engineering.
• With Tridium Niagara Cert is an advantage
• At least 2 years experience in system implementation, maintenance and technical support.
• 2 or more years working experience in PLC Control Program design and implementation in industrial automation, process automation, waterworks, and/or building HVAC systems.
• Have worked with Building Management System/SCADA/HVAC system is an advantage.
• Knowledgeable in administrating and maintaining Oracle Database.
• Experience in maintaining servers, storage and PC servers.
• Knowledgeable of troubleshooting and debugging live software systems.

1. Perform piping design and pipe support design.

2. Interpret and develop PFD & P&ID.

3. Apply international standard and practices such as ASME, ANSI code. Familiar with pipe / tank specifications, nozzle specifications and orientation of nozzles.

4. Perform Material Take Off (MTO) from piping drawings.

5. Perform pipe stress analysis and surge analysis.

6. Responsible for reviewing of piping/mechanical documents and specification from clients and consultants.

7. Responsible for review and check of all piping/mechanical documents and drawings from vendors and suppliers.

8. Prepare technical datasheet and specification.

9. Co-ordinate with engineers of either disciplines within the department.

10. Liaise with clients, consultants, sub-contractors to resolve technical issue at site or in office.

11. Lead and interface within inter-disciplines for all technical matters.

12. Pre-procurement preparation including evaluation of technical and commercial bid from vendor and supplier.

13. To provide engineering support in tendering of new project such as preliminary design, material and cost estimates etc.

14. Provide technical support to project team for on-going projects and resolve any technical issue on site.ue on site.

HLPS is the appointed dealer for Engine Dynamometers from USA like World-famous brand of Taylor and PowerTest which are used by Cummins, Caterpillar, Perkins, MAN, Port of Authority (Singapore) etc in Singapore.

It is also an appointed dealer for Mitsubishi generating set and aftermarket services in Singapore.

HLPS members advise on the genset business for Taiwan listed company like Solomon Technology Corporation (TPE 2359) and for Hong Kong listed company VPower Holdings (1608.HK).

It has an established arm to deal with Genuine spare parts of Cummins, Mitsubishi Heavy Industries, Caterpillar, MTU etc.

In line with our continued growth and expansion, we are looking for experienced and dedicated Mechanical Engineer/Electrical Engineer to join our Singapore team.

Job description:

· To manage maintenance and engineering activities for mechanical/electrical facilities in plants for safe and smooth operations.

· To coordinate and execute major field maintenance works with no compromise to safety of workers and integrity of facilities.

· Respond to customer emergency calls and resolve technical issues/troubles within tight schedule.

· Draft technical documents such as service report, inspection plans and test reports for internal review.

· Develop maintenance plans for building (M&E) systems to ensure they continue to function properly after construction.

· Conduct and arrange training for staff and contractor to enhance their skill and competency levels.

· Conduct site inspections to ensure construction progress and quality is maintained.

· Oversee site delivery, installation, testing and commission of components and its systems.

· Ensure all systems meet local and national codes and regulations.

Requirements:

· Possess a Degree/Diploma in Mechanical or Electrical Engineering.

· Minimum 3 years of relevant work experience in the equipment maintenance servicing of mechanical facilities in the construction and power industry.

· Hands on experience in troubleshooting and repair of static equipment and rotating equipment such as diesel engines, heat exchangers, pumps, compressors and blowers.

· Proficiency in Microsoft Office applications and Auto CAD software skills will be advantageous.

· Essential prerequisites include good analytical & problem-solving skills, ability to communicate with staff in different functions & contractors, and a strong spirit of collaboration & teamwork.

Other info:

· Work location: East of Singapore

· Possess valid class 3 or 4 driving license

· Work Hours: Mon-Sat (9am-6pm, 9am-1pm- Sat)

· Only shortlisted candidates will be contacted.

• To carry out electrIcal related detailed design and preparation of drawing
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram
• To carry out electrical calculation for the design
• Responsible for reviewing of electrical documents and specification from clients and consultants
• To check and review all electrical related drawings and documents from suppliers and vendors
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office
• To co-ordinate with engineers of other disciplines within the department
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc
• To provide technical support to project team for on-going projects and resolve any technical issue on site
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim

Job Description

• Using Microsoft technology stacks, i.e Azure services, SharePoint, Power Platform to develop custom applications to fulfil business needs.
• Involve in software delivery lifecycle (i.e., requirements elicitation, estimation/sizing, solution design, development, testing, deployment, post-production support).
• Apply / Setup DevOps best practices and techniques as part of software delivery.
• Improve / Ensure sound security architecture and design of the applications and their environments.
• Plan and carry out data migration and data analysis activities.
• Facilitation / Participation in Agile delivery events (i.e., Planning & Replenishment meetings, Daily Scrum, Team Retrospectives).
• Conduct evangelisation, provide technical consultancy and clinics.
• Able to carry out Azure subscription administration or Power Platform administration will be a plus.

Requirements

• Degree in Information Technology or related fields.
• Minimum 6 years of experience in designing and developing solutions in the domain of Azure services, SharePoint Online, Power Platform preferably as a full-stack developer.
• Strong expertise in Azure App Services, Azure Functions and Azure SQL.
• Strong expertise in DevOps tools for source control management, Pipelines for continuous integration/continuous deployment (CI/CD), Tests Management, Azure Monitor for monitoring and logging, and Azure Resource Manager for infrastructure deployment and management.
• Strong expertise in SharePoint (SPFx), HTML, CSS, JavaScript and React.
• Strong expertise in REST API and Microsoft Graph API.
• Experienced with scripting languages like PowerShell and Bash.
• Experienced in security tools like Azure Security Center, Azure Key Vault and Azure Sentinel.
• Experienced in implementing authentication protocols in applications via Azure Active Directory (AD), OAuth, Single Sign-On (SSO), and Multi-Factor Authentication (MFA).
• Good understanding of SQL Server, T-SQL, and NoSQL, along with expertise in writing and optimizing SQL queries.
• Good understanding of network concepts such as virtual network, DNS, TCP/IP etc. Familiarity with network security protocols like SSL, TLS, SSH, and HTTPS is also required.
• Competencies in Power Platform application development (Canvas App, Model Driven App, Power Pages and Power Automate flows)
• Experienced in relevant platform administration will be an added advantage.
• Has advanced certifications in the relevant domains will be an added advantage.
• Strong critical thinking, numerical, analytical and project management skills.
• Team player with good inter-personal skills.
• Experienced in Agile frameworks like Scrum and Kanban, including facilitation of agile delivery events.

Job Description

The End User Computing (EUC) team in SIA provides IT services for all SIA Group employees in Singapore and Overseas. We are looking for an experienced professional with relevant experience to be part of the EUC team and play a significant role in modernizing our enterprise authentication system. This position also offers significant opportunity to contribute to the enhancement of our security posture by enabling Multi factor Authentication (MFA) and Single Sign-On (SSO) solutions.

Responsibilities

•Design, implement, and maintain a robust enterprise authentication system with a focus on Multi-Factor Authentication (MFA) and Single Sign-On (SSO).

•Evaluate and assess various solutions available in the market and conduct Proof of Concepts (PoC) to determine the best fit for the organization.

•Stay abreast of industry best practices and emerging technologies to continuously enhance and improve authentication mechanisms.

•Collaborate with cross-functional teams to ensure alignment with overall security strategy.

•Develop and execute a comprehensive migration plan to transition users to the new MFA solution.

•Implement effective change management strategies to minimize disruption and ensure a smooth transition.

•Collaborate with application owners and development teams to seamlessly integrate applications with the new SSO solution.

•Define standard and create authentication patterns for application integration.

•Troubleshoot and resolve any issues related to SSO integration, ensuring optimal performance.

•Act as a subject matter expert and provide guidance to internal stakeholders.

Required Skills

•Bachelor’s degree in computer science, Information Technology, or a related field.

•Proven experience in designing and implementing enterprise authentication solutions.

•Solid understanding of Single Sign-On (SSO) and experience with SSO solution implementation.

•Familiarity with identity and access management (IAM) concepts and technologies.

•Strong knowledge of security best practices.

•Excellent communication and interpersonal skills to collaborate effectively with teams.

•Good working knowledge in Active Directory, Single Sign-On, 2 Factor Authentication, Encryption, LDAP/LDAPS, RADIUS protocol, SAML 2.0, Open ID Connect and OAuth 2.0.

•A good understanding of SDLC and Agile methodology.

•Enterprise Architecture (TOGAF) or Microsoft Certification (MCSE) preferred.

•Exposure to ITIL (Incident, Problem & Change management) preferred.

•Ability to work independently, multi-task, and take ownership.

• To handle the full spectrum of project management
• To lead a site Management team to complete the project on time and within budget
• To inspire and motivate the site team to work effectively and efficiently
• To enforce appropriate measures so as to comply with the required standard of safety in execution of tasks.
• To drive high productivity on site using relevant cost saving methods at all times.
• To ensure that the documented Quality and workplace health and safety (WHS) policies are effectively implemented, maintained and reviewed.
• To ensure the Project Quality and WHS objectives are being met and any discrepancies are being addressed immediately.
• To ensure that the overall phases of the project is effectively coordinated and organized.
• To liaison with the client, consultant, suppliers (sub-contractors) and other relevant authorities on management issues pertaining to the project.

Requirements:

• Degree / Diploma in relevant Engineering discipline.
• Must have at least 5 years of post-graduate experience in project management
• Ability to handle Projects independently.
• Ability to display initiative in execution of tasks and being pro-active in the delivery of tasks
• Dealing professionally in managing tasks and consistently meet tight deadlines
• Attention to details and good problem solving skills

• To carry out instrumentation related detailed design and preparation of drawing
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram
• To carry out instrumentation calculation for the design
• Responsible for reviewing of instrumentation documents and specification from clients and consultants
• To check and review all instrumentation related drawings and documents from suppliers and vendors
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office
• To co-ordinate with engineers of other disciplines within the department
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc
• To provide technical support to project team for on-going projects and resolve any technical issue on site
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim.