職責：

• • 識別並創造銷售機會，以滲透零件銷售和主要現有產品的新客戶
  • 為公司客戶提供服務並管理整個銷售週期
  • 跟進客戶詢問
  • 與客戶建立牢固且可持續的關係
  • 任何其他指派的臨時職責

要求：

• • 工程文憑（任何）
  • 歡迎應屆畢業生
  • 優先考慮至少1年工作經驗
  • 技術傾向，有半導體產業銷售經驗者優先
  • 雙語，具有良好的溝通能力（口頭和書面）
  • 良好的演講技巧
  • 出國旅行的意願

好處

• • 5天工作
  • 運輸索賠
  • 手機索賠
  • 醫療保險
  • 年假、醫療假、兒童照顧/家庭護理假

Responsibilities:

• Identify and create sales opportunity to penetrate new accounts for parts sales and main existing products
• Service corporate accounts and manage full sales cycles
• Follow up with customer enquiries
• Build strong and sustainable relationships with customer
• Any other ad hoc duties assigned

Requirements:

• Diploma in Engineering (any)
• Fresh grads are welcome
• Prefer at least 1 year working experience
• Technically incline with Sales Experience in Semiconductor Industry are preferred
• Bilingual with good communication skills (verbal & written)
• Good presentation skills
• Willingness to travel oversea

Benefits

• 5 days work
• Transport claim
• Handphone claim
• Medical insurance
• Annual, Medical, Childcare/Family care leave

Nanyang Environment and Water Research Institute, NTU is looking for a Research Fellow with expertise in chemical reactors to develop an improved prototype for a thermocatalytic process.

The project is funded by National Environment Agency, Singapore to address one of the largest problems in waste management – the problem of plastic waste pollution. A significant fraction of plastic waste has substandard quality for mechanical and chemical recycling even after sorting and cleaning. The Research Fellow will work on the design, fabrication and testing of a chemical reactor system that will use pyrolysis-chemical vapor deposition (CVD) technology for converting these plastic waste streams (specifically, contaminated and rejected plastics) into multi-walled carbon nanotubes (MWCNTs) and hydrogen. The role of Research Fellow is to design a system prototype that can effectively mitigate the impact of impurities from diverse plastic waste streams on production outputs and can be operated in a continuous mode.

Key Responsibilities:

The candidate will be undertaking full research work and administrative duties during the term of employment within the following areas:

• Experimental work on plastic waste conversion into carbon nanotubes and hydrogen.
• Design, procurement, installation and operation of the prototype system;
• Investigation of system performance and determining factors that influence the yield and quality of outputs;
• Development of improvements in system design to mitigate the factors decreasing quality and yield of outputs;
• Development of a continuous process;
• Liaising with vendors regarding the feasibility of scale up and conducting a cost-benefit analysis.
• Publishing research papers and documenting developed intellectual property.
• Reporting the progress to stakeholders (internal and external).

Job Requirements:

• Ph.D. degree in a field relevant to chemical reactor engineering (e.g., Chemical Engineering, Thermal Engineering, Mechanical Engineering, Process Engineering or other).
• PhD thesis or postdoctoral experience related to chemical reactor engineering for at least one of the following areas: (a) catalytic reactors, (b) continuous reactors.
• First-author publications in the areas mentioned above.
• High proficiency in English (e.g., TOELF, IELTS, GRE) for preparation of research papers.
• Ability to prepare well-written technical reports and research papers.
• Ability to prepare decent quality presentation decks, figures and illustrations.
• Ability to build formal and informal partnerships and work collaboratively with others to meet shared objectives.
• Ability to consistently achieve results, even under challenging circumstances.

We regret to inform that only shortlisted candidates will be notified.

Established in 2010, the Energy Research Institute @ NTU (ERI@N) is a pan-university research institute that focuses on systems-level research for tropical megacities. For more details, please view https://www.ntu.edu.sg/erian

ERI@N invites applications for the position of Research Fellow.

Key Responsibilities:

• Specific precipitation
• Liquid-liquid or Liquid/solid extraction
• Simulation of scaled up process.
• Design of continuous process based on the most interesting systems for the selective recovery of the metal ions of interest
• Implementation of the process at pilot scale (~10 L/h or larger) to demonstrate its feasibility and to give first hints for cost analysis from the perspective of development at industrial size
• Development, characterization and scale up of innovative hydrometallurgy-based separation processes from e-waste leaching solutions

Job Requirements:

• PhD in chemical engineering / chemistry
• Candidate with strong background on chemical separation processes, especially hydrometallurgy ones.
• Good record of publications and IPs
• Experience with lab set up or prototype development
• Familiar with chemical elements characterization techniques (Spectrophotometry, ICP, FX…)
• Familiar with Labview, python or process simulation software
• Excellent command of oral and written English - for research purposes

We regret to inform that only shortlisted candidates will be notified.

General Summary

Currently, we have a great opportunity available for an Chemical Operator, ETP to join our Production Team/Group/Dept. This position will be located in our Singapore branch and will report directly to the Production Engineer. The ETP operator is responsible for safely and efficiently operating all equipment necessary to manufacture atmospheric emulsions, reactor batches, pilot batches, and cold-blend products. This position is also responsible for performing quality control testing, packaging product for shipment to customers.

Primary Responsibilities

· Communicate with Shift Team Leaders and Production Engineer regarding safety, production, quality, or any other operational issue

· Manufacture batches in accordance with all safety, quality, and efficiency standards by following work orders and verbal directions

· Safely and efficiently operate reactors, emulsion kettles, Cowles mixers, homogenizers, heat exchangers, pumps, filtration devices, automated packing stations, forklifts, and other equipment related to the manufacture of chemicals

· Correct packaging of finished goods into pails, drums or totes as required.

· Efficient operation of the wastewater treatment plant, soft water process and boiler operation when necessary

· Use equipment to monitor pressure, temperature, and other hazardous conditions

· Monitoring of SCADA systems

· Execute process parameters warning alarm systems

· Wear proper Personal Protective Equipment (PPE) when required

· Perform quality control testing and adjust batches to ensure specifications are met through water adjustments, debugs, reheats, etc.

· Perform required calibrations on equipment in accordance to ISO procedures

· Ensure accurate documentation and inventory accuracy in accordance to established doctrine

· Use all equipment safely and ensure safe operation of equipment by coworkers

· Maintain clean work areas in accordance with 6S protocol

· Assist in the manufacture of new products and establishing procedures

· Prepare sample as per customer request

· Assist in the prevention of quality problems and the establishment of solutions for existing issues

· Perform related duties as assigned or as the situation dictates

· Live our Values & Behaviors

· Collaborate effectively within a highly matrixed global environment

Other

· Perform related duties as assigned or as the situation dictates.

· Must be able to climb stairs, stand for extended periods of time, and safely lift up to 40 kg

· Must be able to wear required Personal Protective equipment (PPE) for extended periods of time

· Must be able to pass Pulmonary Function Test

· Must be able to operate forklift safely

· Must show proficiency in the operation of all necessary equipment

Critical Competencies, Knowledge, Skills, and Abilities

· Basic math and computer application skills

· Basic mechanical maintenance & troubleshooting skills (eg, mixer, motor & pump) will be a plus

· Knowledge of SCADA, PLC Programming & DCS system will be advantageous

· Ability to think independently and handle tasks through to completion in an efficient manner

· Ability to adapt to changing demands and to react positively to verbal instructions given by a Team Leader or other superior

· Excellent oral and written communication skills

· Proven ability to follow procedures and handle multiple tasks, effecting a positive outcome

· Willingness to work in a team environment

Education and Experience

· “ITE”/ Diploma level

Work Hours

Michelman’s standard work hours for this role is a 12 hours rotating shift, day shift will start from 7am to 7pm and night shift will start from 7pm to 7am.

• Design systems and components that meet needs and requirements.Produce outline designs.Conduct Experiments methodically, analyse data and interpret results.Test and evaluate theoretical designs.Identify, formulate and produce effective solutions to emerging problems.Evaluate final product’s overall performance, reliability and safety.Alter and modify design to meet requirements and to eliminate malfunctionsEstimate budget and scope of project.Solicit observations from operators.Prepare product reports and documentation.Engage in lifelong learning and develop new theories or methods

• Managing the planning and design stages of construction projects.
• Contributing technical expertise to project drawings and designs.
• Performing cost calculations and preparing financial projections.
• Preparing work schedules in collaboration with the project manager.
• Liaising between contractors, subcontractors, vendors, and suppliers.
• Overseeing construction engineering processes.
• Performing regular tests on materials and procedures to ensure compliance with industry regulations.
• Ensuring that the construction project is completed on time and within budget.
• Documenting processes and keeping detailed construction logs.
• Presenting construction project progress updates to clients and senior managers.

• Candidate must be able to read 2D and 3D drawings
• Candidate must be able to fabricate materials according to drawings
• Candidate must be a team player as well as a leader, he/she must be able to lead his team during major projects
• He must always keep a lookout for his colleagues with regards to safety issues etc

Maintain budgets and adjust according to needs as they arise.

Track performance and analyse the completion of key goals.

Document and report project progress to stakeholders and clients.

Problem solving skills with for to manage the pressurised situations.

Coordination and good communication with our own team for project support and sharing experience.

Field Engineer - Job Summary

A Field Engineer is responsible for overseeing and managing engineering projects at construction or operational sites. They ensure that the work is executed according to plans, specifications, and safety standards. This role combines technical skills with hands-on fieldwork to address real-time issues during construction, installation, and testing.

Key Responsibilities:

• Project Supervision: Oversee construction or installation processes, ensuring work meets project specifications and quality standards.
• Site Inspections: Conduct regular site inspections to monitor progress, identify issues, and ensure safety protocols are followed.
• Coordination: Work closely with contractors, engineers, and other stakeholders to ensure efficient execution of the project.
• Documentation: Maintain detailed records of work progress, site conditions, and any deviations from the original plans.

Skills & Qualifications:

• A Bachelor's degree or Diploma in Civil Engineering, Mechanical Engineering, Electrical Engineering, or related fields.
• Fresh graduates are welcome to apply, with on-the-job training and mentorship opportunities.
• Strong problem-solving, communication, and organizational skills.
• Ability to work in field environments
• Able to work under pressure.

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Responsibilities:

• Develop energy efficiency solutions for ACMV and control systems in data centers, commercial and industrial buildings (70% engineering, 30% sales).
• Present energy solution proposal to customer, including turnkey project and maintenance.
• Attend tender site show rounds, assess site conditions, create proposals, and react to RFQs/tenders.
• Effectively respond to client queries and expectations.
• Submitting quotations / proposals to customers in a timely professional manner and continuously follow-up closely.
• Grow the aftermarket service business.
• Contribute to team effort and be accountable for sales growth objectives
• Provide technical training to customers and internal workers.

Qualifications and Skills:

• Degree/Diploma in any Engineering background
• Minimum 2 years relevant sales experience in the ACMV, controls and energy solutions.
• Preferably Singaporean or PR.
• On the job skill coaching/in-house or external training provided
• Possess strong ACMV, controls and energy solution technical skills. Certifications such as SCEM, Energy Auditor and Energy Efficiency Opportunity Assessor would be a plus.
• Proven ability to make impactful business case to win multi-million ACMV, controls and energy solutions contracts.
• Have good existing network with facilities owners and M&E consultants in Singapore.
• Meticulous in execution of work duties, must possess a positive attitude and is hardworking.
• Strong interest in tackling climate change by helping the building owners improve energy efficiency
• Good interpersonal and communication skills

Salary will be commensurate based on qualification and experience

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Job Description & Requirements
Responsibilities:

Develop software solutions by studying information needs; conferring with users; studying systems flow, data usage and work processes; investigating problem areas; following the software development lifecycle.


Determine operational feasibility by evaluating analysis, problem definition, requirements, solution development and proposed solutions


Document and demonstrate solutions by developing documentation, flowcharts, layouts, diagrams, charts, code comments and clear code


Prepare and install solutions by determining and designing system specifications, standards and programming
Improve operations by conducting systems analysis; recommending changes in policies and procedures


Update job knowledge by studying state-of-the-art development tools, programming techniques and computing equipment; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations


Protect operations by keeping information confidential
Provide information by collecting, analyzing and summarizing development and service issues


Accomplish engineering and organization mission by completing related results as needed


Support and develop software engineers by providing advice, coaching and educational opportunities


First and foremost, developing software our users need
Mentor junior and mid-level engineers


Collaborate with team to brainstorm and create new products
Grow engineering teams by interviewing, recruiting and hiring
Make informed decisions quickly and taking ownership of services and applications at scale


Work collaboratively with others to achieve goals
Be a persistent, creative problem ­solver
Remain cool and effective in a crisis
Stay on the leading edge of development practices


Passionate about great technologies, especially open source
Understand business needs and know how to create the tools to manage them

In Helmsion Engineering, we believe each and everyone in the company are valuable in contributing to our business. Besides monetary rewards, we also provide on-job training. In this role you will make an important contribution to the entire sales process from business development prospecting to closing of sales.

Sales Engineer

· Coordinate and participate in sales reporting and customer meetings.

· Provide good customer service with technical support and attend to their enquiries.

· Conduct site visits and assessments to meet the clients' needs.

· Seek referrals andcontinue to build customer base.

· Analyse opportunities and make recommendations to customers’ requirements.

· Clearly articulate the value of Helmsion products and services, demonstrate a strong understanding of our product offerings and the competitive landscape.

· Prepare budgetary proposals, Request for Information, Request for Proposals.

· Work with the team to negotiate and close complex deals.

· Strategize with the team to explore the market and maximize profits.

· Prepare analysis reports on sales performance against revenue objectives, sales productivity and ideas to review effectiveness.

Requirements

· Degree in Business/Mechanical Engineering or Technical Education

· Excellent multi-lingual and interpersonal skills

· Excellent time-management with consistent follow-up skills

· Team player who can work independently and possess a ‘go-getter’ attitude

· Excellent relationship management skills with the ability to establish and maintain strong relationships with contacts

· Experience in outdoor industrial equipment sales will be an advantage

· Basic + Allowance - HP & Transport + Commission base on sales target

· Required to visit customers

· Fresh graduates are welcomed to apply if:

(1) you are a team player with strong desire to learn and succeed

(2) Positive, high energy, enthusiasm, drive with an extroverted character

(3) Enjoy working and engaging with people from all walks of life, building professional networks with them

Welding Engineer Summary

Welding Engineer is responsible for developing safe and efficient welding processes and procedures for a variety of materials and products. The Welding Engineer must have an in-depth knowledge of welding principles, materials selection, and welding technologies. They must be able to create and implement innovative welding designs, operations, and processes. The Welding Engineer must be able to troubleshoot and solve welding-related problems. They must also be able to provide technical guidance to other engineers, welders, and technicians.

Job Description:

• Prepare WPS/PQR
• Calculate the hours required for the work process
• Design, fabricate and assemble welding components and products
• Analyze blueprints and other technical documents to plan projects
• Select the appropriate welding techniques and methods for the job
• Conduct tests and inspections on welded components
• Collaborate with other engineers and technicians on project design and development
• Maintain and repair welding equipment
• Monitor and document project progress and provide regular updates
• Ensure that projects meet safety and quality requirements

Skills:

• Planning and managing welding projects
• Developing welding processes and procedures
• Monitoring welding quality and preparing welding reports
• Selecting, assembling, and setting up welding equipment
• Using heat analysis and metallurgical knowledge to determine the correct welding process for each application
• Troubleshooting welding problems and determining corrective actions
• Performing welding tests and inspections
• Conducting welding research

Requirements

• Nitec/ Bachelor's degree in welding engineering or related field
• Experience with welding processes
• Strong Knowledge of engineering welding principles and practices
• Ability to read and interpret blueprints and schematics
• Knowledge of safety procedures
• Ability to work independently and as part of a team
• Excellent problem-solving skills

Job Description:

• Manage the procurement activities of direct materials, including review and convert Purchasing. Requisition (PR) into Purchase Orders (PO); resolve invoice, or quality related discrepancies.
• Sending requirements to suppliers : Request for Quote (RFQ), Request for information (RFI) using digital tools.
• Purchase price analysis and price negotiations; Identification and realization of savings potentials,
• Close cooperation with the stake holders and suppliers.
• Supplier management including supplier set up, supplier evaluation and development.
• Optimization of existing supply chain processes and participation in project teams.
• Leverage existing procurement processes and compliance while seeking to identify best management practices. Using a continual improvement mindset to create efficient processes.

We are looking for:

• Degree in Industrial Engineering, Business Management, Economy or similar areas,
• +4 years professional experience in a similar position,
• Knowledge of Procurement / Supply Chain activities with a broad solid understanding of operational, activities across a range of businesses.
• Previous experience of working in Supply Chain Management
• Good knowledge of MS Office and SAP
• Fluent in English (written and spoken); Strong communication and negotiation skills;

Job Responsibilities:

1. Design of commercial, residential, industrial buildings in precast.
2. To liaise and coordinate with consultants and main-contractor on project details and resolving technical issues.
3. Accountable for the preparation and completion of precast shop drawings with specific time and meets all clients’ requirements.
4. Accountable for accuracy and updating amendments to precast shop drawings.
5. Attend meetings with consultants and main-contractor as well as site meetings.
6. Manage drafting staff and check drawings to ensure compliance with design concept.
7. Manage, plan and schedule projects, shop drawings for submission and production.
8. To liaise internally with coordinator and production on submission/issuance of shop drawings any technical issue and keep them updated of any revision.
9. Conduct review on details of design to ensure the accuracy of shop drawings produced.

Job Requirements:

1. Bachelor degree in Civil & Structural Engineering from recognised University.
2. 3 years working experience in construction design.
3. Familiar with design analysis software such as Etabs, Prokon etc.
4. Good communication skills.

Build a career with confidence

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the center of everything we do.

About the role

This position is for a Service Sales Representative, who is responsible for pursuing opportunities for quick turn projects to keep our customers operating effectively, supporting various Outside Sales activities and customer relationship management. Responsible for supporting the company's interests and establishing business relationships to enhance outside sales performance.

Key Responsibilities:

As a Sales Engineer, you’ll be responsible for:

• Establishes prospects and develops a professional relationship to understand the customer needs and suggest products and/or services that meet the customer needs.
• Responsible for leveraging existing Service Agreement Customers / Non-Service Agreement Customer base for service repair / Upgrade opportunities.
• Aids in and supports business development activities for prospects within defined customer segment to support the business strategy.
• Provide leads for service agreement sellers / Service Modernization team when dealing with customers not under contract
• Utilize SFDC to manage customer interactions, activities, and opportunity pipeline.
• Prospects bid opportunities, participates in the preparation of bid responses and the negotiation with potential customers.
• Develops personal customer relationships with prospective accounts to influence opportunities.
• Establish and build credibility with knowledge of Carrier products/solutions.
• Develop and sustain customer relationships Clearly articulate the value of Carrier’s value offerings and how they map to the customers’ needs.
• Ability to detect the Customer’s buying stage and adjust selling accordingly.
• Attends trade shows at times to increase the visibility of the organization and potentially influence prospects.
• Achieve order booking in a timely manner meeting consistently sales metrics and annual targets.

Requirements

We are looking for people who has a passion for sales and possesses great communication skills. If this is you, get in touch.

As a minimum you must have:

• Minimum Degree holder.
• Preferably 2-3 years experiences in Sales or Engineering, candidates without prior relevant experience are welcome to apply.
• Proficient in Microsoft Office Skills.
• Able to communicate with stakeholders of all levels.

Benefits

We are committed to offering competitive benefits programs for all of our employees, and enhancing our programs when necessary.

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

· Report to Project Director / Project Manager.

· Attend site visit and prepare cost estimation.

· Co-ordinating and follow up all the individual respective project team like Civil, E&I, Scaffolding, Automation, Passivation, Safety, Lifting and others.

· As a Controls Engineer you should perform a vital role in designing and developing systems for manufacturing operations.

· Draft tender documents and cost estimation spreadsheet.

· Design layouts, materials and information flow, or machine placement.

· You should responsible to evaluating performance and proposing and implementing improvements new or existing systems.

· Present final figures and unit rates to management.

· Submit tender documents and attend clarification meeting (if requested by client).

· Attend project/ safety meeting with client/sub-contractor/internal and prepare minutes of meeting.

· Prepare overall construction detail schedule for the project.

· Plan, coordinate and execute the job to meet the schedule and quality requirements.

· Prepare / review of project specification, P&ID and material take-off.

· Handling all technical queries and investigating all work-related problems and coordinating with client/sub-contractor/supplier to clarify the problems.

· Ensure the Safety, Productivity and Quality of the project.

· Prepare Method of Statement (MOS), Inspection Test Plan (ITP), Project Schedule and other working procedures.

· Ensure the installation / erection works meets the specification and requirements.

· Liaise with QA/QC personnel and ensure all the works comply with the requirements.

· To carry out inspecting and rectifying any unsafe practices and unsafe place of work.

· You will oversee the safety and job/ project operation.

· Prepare weekly / monthly progress reports/ safety reports/ manpower reports etc.

· You are to direct, guide and manage all tasks under your charge and ensure it is carried out in the most creative, efficient and professional manner to the best of your ability.

· You shall ensure, uphold and comply with all office standards, local by-laws and regulatory requirements.

· Report to Project Director / Project Manager.

· Attend site visit and prepare cost estimation.

· Co-ordinating and follow up all the individual respective project team like Civil, E&I, Scaffolding, Automation, Passivation, Safety, Lifting and others.

· As a Controls Engineer you should perform a vital role in designing and developing systems for manufacturing operations.

· Draft tender documents and cost estimation spreadsheet.

· Design layouts, materials and information flow, or machine placement.

· You should responsible to evaluating performance and proposing and implementing improvements new or existing systems.

· Present final figures and unit rates to management.

· Submit tender documents and attend clarification meeting (if requested by client).

· Attend project/ safety meeting with client/sub-contractor/internal and prepare minutes of meeting.

· Prepare overall construction detail schedule for the project.

· Plan, coordinate and execute the job to meet the schedule and quality requirements.

· Prepare / review of project specification, P&ID and material take-off.

· Handling all technical queries and investigating all work-related problems and coordinating with client/sub-contractor/supplier to clarify the problems.

· Ensure the Safety, Productivity and Quality of the project.

· Prepare Method of Statement (MOS), Inspection Test Plan (ITP), Project Schedule and other working procedures.

· Ensure the installation / erection works meets the specification and requirements.

· Liaise with QA/QC personnel and ensure all the works comply with the requirements.

· To carry out inspecting and rectifying any unsafe practices and unsafe place of work.

· You will oversee the safety and job/ project operation.

· Prepare weekly / monthly progress reports/ safety reports/ manpower reports etc.

· You are to direct, guide and manage all tasks under your charge and ensure it is carried out in the most creative, efficient and professional manner to the best of your ability.

· You shall ensure, uphold and comply with all office standards, local by-laws and regulatory requirements.

Designing, maintaining, implementing, or improving electrical cooling products and facilities.

Performing a wide range of engineering tasks by operating computer assisted engineering software.

Conferring with customers, engineers, and others to discuss existing or potential engineering products or project.

Ensuring compliance with specifications, codes or customer requirements by directing or coordinating installation.

Writing reports and compilling data regarding existing and potential electrical engineering projects and studies.

Preparing specifications for purchase of electrical equipments and materials.

Estimating material, labour, or project costs for budget preparation.

Supervising or training project team members.

Maintaining electrical equipment.

Working with a variety of technicians

Roles:

-Interpretation and analyze of production drawings & documents. -Implementing best fabrication / machining practices and techniques to develop and maintain efficient processes to achieve productivity, quality and safety.

-Planning of project and management of the project team to keep project on schedule and budget.

-Handle all day-to-day issues and troubleshooting problems as they arises finding efficient and effective solutions.

-Estimate costs for quotation preparation.

-Coordinate and work closely with management, customers, contractors and suppliers.

-Maintain good customer relationship.

-Perform other duties as assigned to ensure success of project and company objectives.

Requirements:

-NItec / Diploma in Mechanical / Manufacturing Engineering or related.

-At least 5 years experience in metal fabrication and machine shop activities.

-Self-motivated and result-driven mindset

-Great communication and interpersonal skills

• Develop new customers while managing our existing customer base
• Pre-sales preparation (preparing project budgetary prices, quotations, costings, completion of technical specifications, delivering catalogues and engineering data to customers)
• Provide technical and engineering support to customers, whenever necessary.
• Electrical & mechanical products knowledge

We are seeking a highly skilled Service Engineer to join our dynamic team. The Service Engineer will be responsible for providing technical support and expertise to our in-house production team in Singapore and globally, and ensuring our products operate efficiently and effectively. This role requires a strong understanding of TIG automatic cladding machines, manual welding machines (E.g. Fronius Brand)

Key Responsibilities:

• Install, maintain, and repair automatic and manual welding machines and/or CNC Machining
• Diagnose mechanical, electrical, and software-related issues and propose appropriate solutions.
• Conduct preventive maintenance and calibration of equipment to ensure optimal performance.
• Resolve production technical concerns and requirements.
• Provide in-house training on the proper use and maintenance of equipment.
• Create and maintain detailed service reports and documentation.
• Work closely with the sales and engineering teams to support product development and improvement initiatives.
• Stay updated on new technologies and industry trends to provide proactive support and recommendations.

Requirements:

• Proven experience as a Service Engineer or similar role in the O&G industry
• Strong problem-solving skills and ability to think analytically.
• Excellent communication and interpersonal skills.
• Ability to work independently and collaboratively in a team environment.
• Willingness to travel frequently to Philippines and Malaysia as needed.

Location: Singapore / Philippines

Application Process:

Interested candidates should submit a resume and cover letter outlining their qualifications and interest in the position to [email protected]