Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

We are seeking an Electric System Design Engineer to design hydraulic and electric systems for Ro-Ro equipment. As a key team member, you will be responsible for developing high-performance systems that meet safety, regulatory, and operational requirements in Marine Industry. Fresh graduates from Electrical, Mechatronics, or Mechanical Engineering backgrounds are encouraged to apply, as we provide training and development opportunities to enhance your skills.

Qualifications:

• Bachelor’s degree or higher in Electrical, Mechatronics or Mechanical Engineering.
• Strong problem-solving skills and active communication skills.
• Excellent interpersonal and collaboration skills.
• Experience in the design of hydraulic and electric system add value.
• Experience in both of Shipbuilding and Marine industry will be a significant plus.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• Attends and records the daily quality assurance related inspections for mechanical and HVAC installations
• Coordinates with other production departments, clients, and surveyors for Inspection & testing requirements
• Assigns the systems to be tested to the various supervisors and technicians involved in the operation
• Ensures that the Quality work processes to enhance efficiency and productivity
• Reports on non-conformance and issue Improvement notes, where necessary
• Ensures timely completion of project
• Ensures that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements
• Any other assigned duties and responsibilities

Requirements:

• Degree in Marine and Offshore / Mechanical Engineering
• Minimum 5-10 years’ experience with 3 years in marine construction and installations
• Must have ASME PCC-1
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). We have been a Trusted Partner for over a decade, delivering a wide range of products and services, including infrastructure and operational services, authentication services, governance and assurance services, and managed processes. In an ever-evolving digital and cyber landscape, trust and collaboration are paramount. ATS collaborates closely with GovTech, government agencies, and commercial partners to enhance security postures and mitigate cyber risks.

We are seeking a highly motivated and talented individual to join our team as an Application Infrastructure System Engineer. This role will involve assisting the application infrastructure architect on developing, designing, deploying and maintaining the application and infrastructure to support MPA systems, including Messaging Streaming system and other mission critical systems running in both GCC (Government on Commercial Cloud) and on-premises.

The ideal officer should be able to identify optimal cloud solutions for MPA and maintain cloud infrastructures in accordance with best practices and Government agency security policies. You should have practical knowledge and experience of public cloud services and excellent troubleshooting skills. You will work with different IT professionals and teams to ensure the hybrid cloud infrastructure meet the needs of applications and customers.

The ideal officer will also have practical knowledge and experience of event-driven architecture and event-driven integrations with various applications and systems. You will work with different application teams to assist them on the design, develop and integrate event-driven applications. You must be passionate about technology, embrace changes and keen to explore new ways to automate existing processes. You must be a good communicator being comfortable to communicate effectively to all levels and types of employees as well as external partners/contractors.

A brief summary of your job responsibilities:

• Designing, implementing, and maintaining the hybrid cloud infrastructure, such as virtual machines, storage, load balancer, firewall and network virtual appliance components. Integrating cloud-based systems with on-premises systems and ensuring seamless data transfer between the two environments.
• Designing, implementing, and maintaining the Event-Driven messaging infrastructure. Providing technical guidance and governance on application integration and security compliance.
• Designing, implementing, and maintaining Kubernetes infrastructure with service mesh. Automate the maintenance and application deployment in Kubernetes cluster.
• Identify, analyse, and resolve infrastructure vulnerabilities on regular basis.
• Regularly review existing systems and make recommendations for improvements.
• Provide technical guidance and support for various common infrastructure services: Active Directory, DNS, WSUS, IAM, SiteMinder, MSSQL server, SFTP server, Proxy server, RDS, etc.
• Perform regular maintenance on server patching, software update, backup and restore, DR exercise, audit review and account management.
• Designing, implementing, and maintaining the systems comply to IM8 and CSA, security standards, and internal policies, taking appropriate measures to mitigate risks and ensure data protection.
• Automation of resources provisioning and deprovisioning with template and scripting languages.

To excel in this role, you will ideally have:

• Minimum of 5 years of professional experience with Microsoft Windows Server and/or RedHat Linux Server infrastructure.
• Minimum of 2 years of working experience in the field of cloud computing.
• Experience in designing, developing, and managing cloud-based infrastructure and applications
• Technical skill of Powershell, Python and bash scripting and automation
• Experience with IAM solution and modern authentication mechanism: OAuth2/OIDC and SAML
• Willing to embrace changes and new technologies.
• Strong analytical, troubleshooting, and problem-solving skills.
• Strong communication and collaboration skills.
• Ability to work effectively in a team environment and collaborate with cross-functional teams.
• Practical experiences in managing system integrators / contractors / partners
• Azure, AWS, and GCP certifications are preferred.
• Microsoft or RHEL certified is a plus.
• Experience in Solace is a plus.
• Experience in supporting CII (Critical Information Infrastructure) systems is a plus.
• Familiar with IM8 is a plus.

Join us and explore a fulfilling career with Assurity Trusted Solutions, where innovation meets impact!

The remuneration package will be tailored to your qualifications and experience. Interested applicants, please click "Apply Now".

We appreciate your interest and kindly note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used, and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech, and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Annual Leave Benefits with additional perks such as Family Care and Birthday Leave.
• Contract Staff enjoys the same benefits as Permanent Employees.

We are seeking a dynamic Software Engineer (Python) to join our growing global team, Recommendations domain to work on exciting projects like implementation of our own machine learning framework, integrating a feature store for supporting real-time data science requirements and the creation of complex data ingestion pipelines to support this!

Join us in creating an engaging and personalized shopping experience for our users. Every feature and improvement you develop will enhance customer choice and app performance, making it easier for users to find and enjoy the products they love. Your work will have a lasting impact on customer satisfaction and loyalty across diverse markets.

Responsibilities

• Working closely with Data Scientists and Product Managers to run experiments on new recommendation features.
• Deploying low latency databases and datastores to support operational requirements of the recommender models.
• Working with senior engineers to maintain our API Gateway.
• Deploying and maintaining ML models on our deployment framework that power recommendations on all pages of the application.
• Enabling and actively managing observability tools on all touch points within our systems.

Proficio is an award-winning managed detection and response (MDR) services provider. We provide 24/7 security monitoring, investigation, alerting and response services to organizations in healthcare, financial services, manufacturing, retail and other industries. Proficio has been highlighted in Gartner’s Market Guide for Managed Detection and Response Services for the last three consecutive years. We have a track record of innovation. Proficio invented the concept of SOC-as-a-Service. We were the first MSSP to provide automated response services and the first in our space to provide a risk scoring dashboard.

 Our typical client is a medium to large-sized organization that lacks the in-house resources to address the challenges of a rapidly changing threat landscape. The difficulty of hiring and retaining cybersecurity professionals are widely understood but our prospective clients also struggle to effectively harness technology and build hardened processes.

 While Proficio has developed a unified service delivery platform designed to meet the needs of the most demanding clients, what sets us apart is the quality and passion of our people. We believe the SOC of the Future will meld the creativity of human intelligence with the power of advanced technologies like AI.

SUMMARY

The SIEM Infrastructure Engineer reports to our SIEM Infrastructure Engineering Manager and handles production support and onboarding for our Elastic SIEM global customer instances. We are hiring customer-facing entry and mid-level individuals for this team who will be able to organize and drive multiple customer implementations and maintenance scenarios at once.  This is a position for a tech-savvy individual so we expect the majority of the work to be done remotely with customer interaction mainly being telephonic, email or video and occasional customer site visits.

• Our SIEM Infrastructure Engineers are security problem solvers!  They look at the SIEM Infrastructure and think “problem,” first, “tool set” second.  We are tasked today with utilizing the Elastic SIEM to enhance our customers’ security, but we see other products on the horizon.  We seek a security minded professional who is creative with their problem-solving skills, adaptable with their tool sets, but also proficient today in the Elastic SIEM product. 
• Ability to work in a team:  Our US SIEM Infrastructure Engineers do not work in a silo!  They are in front of our customers before and after the sales helping to determine needs, find solutions, and outline work to be done.  They are supported by a global team of Elastic Stack Architects, Admins and Developers who also execute and support the Elastic implementations we envision.  We seek individuals who are able to work in a global team and pass work from shift to shift as needs require. Lone wolves are not allowed!
• Ability to work independently:  This is a hybrid position that services customers across the globe.  Our staff works both remotely and in office for client meetings and presentations.
• We are doing great things!  We want enthusiastic Elastic SIEM professionals who can share our passion with customers.  Strong communication skills prior to contract execution will ensure our customers know exactly what to expect during the onboarding process.  Continuous relationship building throughout the implementation and maintenance phase will ensure our customers are receiving our best in class service for their cybersecurity needs!

• The nitty gritty:  1-2+ years hands on experience in engineering and supporting a large scale Elastic Stack environment; strong event logging solutions for large corporations is preferred; experienced with multiple security platform administration or engineering within large-scale or global enterprises combined; understanding of Network Firewalls, Load-balancers, and complex network designs; good understanding of Unix/Linux and Windows operating systems, good command on Python, Perl, SQL, Regex and Shell scripting is preferred.
• Specific work history should include knowledge in Terraform, Kubernetes, AWS, and Elasticsearch
• Clear understanding of Elastic's data onboarding process and CIM mapping.
• Ability to define and clearly express work required to customers.
• Ensure security, availability, and confidentiality of all sensitive data collected, processed, or stored by this position

• Opportunity to work in a progressive organization with structured training and roadmap for success

• Health benefits, lunches, gym reimbursement, and fun events for our Singapore staff!
• Experience in one of the hottest IT industries today

Proficio is an EOE employer.

Proficio collects certain personal information upon your submission of an application for an open position. More information is available about your consumer rights and our privacy policy at www.proficio.com/privacypolicy

Job Title: Project Engineer

Occupation: Mechanical Engineer / Fire Protection Engineer

Industry: Industrial Pump Supply

Job Highlights

• 5 Days Work Week
• Attractive Employee Benefits
• Guaranteed 1-Month Bonus + Attractive Sales Incentive
• Work-Life Balance
• Ample Opportunities for Growth

Job Description

We are seeking a dedicated Project Engineer to support our growing team.

As a key player in the company, you will:

• Support the Project Team in pump selection, quotations, technical documentation, and drawings
• Follow up with customers and suppliers on inquiries and orders
• Liaise with customers, suppliers, and internal departments to ensure project deadlines are met
• Initiate and request orders for required project supplies
• Coordinate project timelines and resources

Requirements

To be successful in this role, candidates should have:

• A minimum of a Diploma in Mechanical Engineering or a relevant field
• Project coordination experience
• Strong critical thinking and time management skills
• Ability to work independently in a fast-paced environment
• Analytical, detailed-oriented, flexible, and dynamic mindset
• Strong written and verbal communication skills
• 2D AutoCAD skills are essential (Good AutoCAD skills are an advantage)
• A Class 3 Driving License is preferred but not mandatory

Skills Required

• Project Coordination
• Mechanical Engineering
• AutoCAD (2D)
• Technical Documentation
• Time Management
• Verbal Communication
• Critical Thinking
• Project Management
• Commissioning
• Ability to work independently

Layout Engineer for Silicon IP development

We are looking for an Integrated Circuit (IC) layout engineer for silicon IP development for emerging satellite and high-reliability applications.

Job Description

· Develop digital and analog library cells in various technologies (e.g. CMOS & SOI)

· Layout digital cells for various trade-offs (including speed, power, area, reliability)

· Layout analog circuits and IO circuits

· Characterize digital cell cells for timing and power analyses

· Construct test structures for validating various digital and analog cells

· Analyze the reliability issues (e.g. soft-errors) for various digital cells

· Support the front-end team for System-on-Chip (SoC) integration

· Document the development of digital and analog cells

Minimum Qualifications

· Possess at least a Bachelor Degree or equivalent in Electrical & Electronic Engineering or any related field with background on Integrated Circuit Design (both Analog and Digital)

· Knowledge in Electronic Design Automation (EDA) tools (e.g. Cadence, Synopsys, Silvaco)

· Knowledge in cell characterization tools (e.g. Liberate or SiliconSmart or Viola)

· Knowledge in Application Specific Integrated Circuit (ASIC) designs (full custom design methodology)

· Knowledge in digital circuit reliability issues (e.g. latch-up, soft error rates, aging, threshold voltage shift, etc.)

· Experience in digital foundation library cell development (e.g. combinational cells, sequential logic cell, memory cells, IOs)

· Experience in library cell characterization (e.g. understanding in various timing and power models)

· Experience on circuit testing

· Proficiency in English

• Total Plant Maintenance (Preventive maintenance & Corrective maintenance)
• Daily operations suport (Including Ah-hoc & CAPEX Projects)
• Shutdown, Pit-stop/Turnaroundworks
• Plant start-up commissioning support
• Computerized maintenance management system
• Condition Monitoring/Reliability Engineering
• Identifying project goals and scope
• Planning and documenting project tasks
• Ensuring deliverables are delivered on-time
• Managing all project resources
• Effectively communicating with stakeholders
• Eliminating blockers and potential risks
• Documenting projects process using various project management tools
• Ensuring top-quality results and project success

Key Accountabilities: ​

Sales Engineering and Application Matters

• Provides the design, drawing and documents for the customer’s technical requirements.
• Calculates, verifies, selects the right equipment/suppliers.
• Provides the technical specifications and defines the scope of supply for the equipment.
• Provides and maintains the product and sales engineering information.
• Uses the computerized engineering tools/database, technical library information and factory standards for the engineering work.
• Prepares and carries out technical presentations and training.
• Familiarize oneself with the applicable international and in country technical standards.

Sales Support Matters

• Work closely with sales to define the technical scope of supply.
• Reviews/clarify customer’s specifications & tender documents.
• Provides technical solutions and scope of supply.
• Coordinates with factory and local suppliers for scope of supply.
• Provides total product and project cost calculation.
• Provides technical specs, scope of supply and work with suppliers/contractors to obtain proposals and quote for the equipment timely.

Order Execution

• Raises the necessary purchase requisitions for the scope of supply.
• Manages the order with internal departments, suppliers and contractors till all contractual requirements are fulfilled.
• Verify on the clarification of the order, sales engineering, and drawings/documents.
• Knowledge in SAP tool

Qualifications and Skills:

• University / college studies in Electrical or Mechanical engineering.
• Experience in the diesel/gas engine/generator industry, min. 7 years.
• Hands on experience on engineering, site supervision and commissioning of diesel genset with knowledge of electrical power systems and genset control system
• Knowledge of engineering calculation for and related to genset and electrical systems.
• Review electrical schematics, wiring diagrams, P&ID and system layouts.
• Knowledge and Project execution in the packaging and testing of genset.
• Knowledge in Autocad would be an added advantage.
• Knowledge of switchgear and electrical power protection would be an added advantage.
• Adaptable to different cultures and business practice
• Excellent team player with an open mindset, collaborative spirit and excellent communication skills.
• Proactive and positive attitude.
• Proficient in English language. Fluent in Mandarin would be an added advantage.
• Willingness to travel.

Job Duties and Responsibilities:

• Responsible for trouble shooting and resolving all welding quality and productivity issues through active engagement with the customers and production supervisors
• Develop and draft new welding procedures, including procedure qualification training
• Trouble-shoot and provide support to the Production on all welding quality issues
• Conduct random inspections to ensure that the welding activities carried out conform to the relevant customer specifications, codes and standards
• Directs and coordinates technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with national code requirements; or testing welding personnel for certification
• Contacts personnel of other agencies, engineering personnel, or clients to exchange ideas, information or offer technical advice concerning welding matters
• Perform any other related duties as assigned by Immediate Supervisor

Requirements:

• Diploma/ degree in Metallurgical/ Material/ Mechanical Engineering
• At least 4 years of relevant experience in preparation of WPS, PQR and welders’ qualification
• Knowledge of API, ASME-IX, NACE MR00175 codes and ISO 9001:2015 standard
• Certified Welding Inspector or CSWIP

DUTIES AND RESPONSIBILITIES

• Develop and debug test equipment, executable software, and code.

• Works with testing equipment to develop user friendly software.

• Take on various engineering tasks which will help to acquire new skills.

• Design software architecture and optimize the performance.

• Data acquisition and manipulation using different hardware.

• Provide customer support to internal and external stakeholders in person, over the phone or via email.

• Provide documentation for new or existing designs.

• Follow and familiarize self with company policies and procedures.

• Performs tasks accurately and efficiently, free from errors.

• Adapts to changes in the work environment, manages competing demands and is able to deal with change, delays or unexpected events.

• Energetic, enthusiastic, positive outlook.

• Listen attentively and able to grasp fast-paced technical conversations.

• Maintain a clean and organized work area on a daily basis.

• Consistently at work and on time, follows instructions, responds to management direction and solicits feedback to improve performance.

REQUIRED SKILLS

• Experience with using LabVIEW, CTT, Python, and C#C

• Excellent technical writing abilities

• Excellent conceptual, analytical, and problem-solving abilities.

• Excellent computer skills – CAD, word processing, and spreadsheets.

• Confidence to evaluate risks and tradeoffs and present solution options to management.

• Ability to influence to deliver schedules.

• Strong analytical and problem-solving skills required.

Job Summary:

• As a Service Engineer, you will play a critical role in maintaining the operational efficiency of our equipment.
• Your expertise will ensure that our services remain top-notch, directly impacting our client satisfaction and operational success.

Key Responsibilities:

• Conduct periodic inspections, repair, service and maintenance of Musasino equipment to ensure reliable operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.

Job Requirements:

• Fresher or related marine engineer experience are welcome.
• A minimum of a Diploma in Engineering (Electrical, Electronics, Mechanical, Mechatronics) or equivalent educational background.
• Ability to work overtime and weekends when required.
• Willingness to travel overseas for an assignment as required.
• Ability to work independently and under pressure, delivering quality results within tight schedules.
• Team player.

Highlights:

• Gross Salary: S$3000 to S$4000/ month
• Working Day: 5 days
• Working Hour: 8am to 5pm
• Overtime paid when working outside of working hours (include Weekend/ Public Holiday)
• Dental and Medical Benefits
• AWS

Job Responsibilties

• Provide after-sales product and technical support - engaging with customers, clarification meetings, supporting 3rd party events.
• Design BMS system architecture, HVAC control system and optimization program tailored to each upgrading project requirement.
• Analyse existing BMS operation and HVAC performance to propose system renewal and control system improvement.
• Support project management team on existing building upgrades including testing and commissioning.
• Troubleshoot Yamatake and Azbil product problems for existing maintenance at job site.
• Track and analyse recurring faults or issues in BMS and other monitoring systems to identify patterns.
• Use trend date to provide insights on system vulnerabilities and potential areas for improvement.
• Perform various engineering calculation, equipment sizing and selection and procurement of equipment ensuring it meets safety standards and performance requirements.
• Supports the Sales on technical aspect to formulate Business Development plan for Building Automation Solutions in Singapore.
• Liaise with various departments in Headquarter in Japanese language to report the latest trends and requirements of Singapore Market
• Identifies industry trends, collects and assesses competitive and market intelligence.
• Regularly contact with Japanese and non- Japanese customers to exchange information.

Requirements

• Bachelor's degree in a technical discipline preferred;
• Minimum 4 years of experience in BMS and Automation industry
• Well versed in specification and selection of Yamatake and Azbil building automation system and product, not limited to system and controller but including field devices like sensors, control valves
• Strong communication presentation skills with the ability to present technical information to non-technical stakeholders.
• Proficiency in Japanese Language both verbal and written is a must

Education:

Diploma/Degree in Electrical Engineering, Computer Engineering, Computer Science

or with experience of at least 3 years and above
or both.

Programming Competency:

Competent in programming languages C++, C#, SQL database and .Net Framework 2.0 and above environment.

Competent in PLC and inverter systems preferred

Other Requirements

Only S’pore citizens/PRs need to apply.

Able to lead a small team in projects.

Need to communicate with project/site managers regarding project requirements.

Proficiency in English essential as submission of site reports is required.

Preferred

Competent in PLC and inverter systems preferred

Knowledge and experience in port and warehouse cranes, preferred.

Able to use Autodesk electrical CAD with hands on electrical experience, preferred.

Candidates with class 3 driving license are preferred.

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

The Senior Engineer, Projects, will lead and manage projects from initiation to completion, ensuring alignment with scope, budget, and timeline requirements. This role involves overseeing mechanical and electrical components' fabrication, assembly, and installation while coordinating with cross-functional teams to meet project objectives.

Responsibilities

• Lead projects, ensuring timely delivery, adherence to scope, and budget compliance.
• Oversee fabrication, assembly, and installation of mechanical and electrical components.
• Coordinate with factories, contractors, and cross-functional teams to align objectives.
• Review and interpret mechanical drawings, specifications, and technical data.
• Ensure fabrication adheres to layouts and designs.
• Collaborate with the procurement team to ensure timely material delivery.
• Conduct quality checks, testing, and inspections to maintain standards.
• Resolve technical issues and implement corrective actions.
• Planned and coordinated with after-sales teams to ensure smooth workflows.
• Maintain project documentation, including progress reports, Gantt charts, and technical records.
• Supervise inbound and outbound activities.
• Inspect parts to ensure compliance with BOM and data sheets.

Requirements

• Degree or Diploma in Mechanical Engineering or related field.
• 5-7 years in a similar role or industry.
• Proficiency in AutoCAD, Microsoft Office Suite, and project management tools.
• Knowledge of mechanical systems, equipment, and industry standards.
• Strong analytical and decision-making abilities.
• Ability to manage multiple projects simultaneously.
• Detail-oriented with excellent problem-solving skills.
• Strong communication and coordination abilities.
• Preferred candidates should have access to a vehicle.

Job Title: Procurement Engineer - Electrical & Instrumentation (E&I)

Main Responsibilities:

1. Supplier Sourcing & RFQs:Source potential suppliers in line with project specifications. Send out Requests for Quotation (RFQs) to suppliers and evaluate responses.
2. Vendor Management:Evaluate new and existing suppliers for inclusion in the Approved Vendor List (AVL). Coordinate with vendors for technical clarifications and requirements.
3. Negotiations & Purchase Orders:Perform negotiations with shortlisted suppliers to obtain the best price while ensuring timely delivery. Ensure that appropriate terms and conditions are included in the purchase orders. Prepare Bidtabs for internal approval. Prepare Purchaser’s Terms & Conditions for purchases over SGD 150K.
4. Project Coordination:Coordinate with the Project Team and suppliers for all procurement-related issues. Manage urgent purchases and ensure timely order processing. Ensure coordination with Material/Logistic Controllers for Goods Receipt/Issue (GR/GI) issues.
5. Vendor Training & Product Presentation:Organize training sessions and product presentations from vendors to ensure project teams are informed of key product specifications and details.
6. Delivery & Expediting:Monitor and ensure the timely delivery of materials and equipment from vendors. Assist in expediting deliveries when required and coordinate with Finance for invoice-related issues.
7. Return & Replacement:Coordinate with vendors for returns or replacements of defective materials. Issue Purchase Orders (PO) for replacements, as necessary.
8. Documentation & Reporting:Maintain accurate records of procurement activities and report to Supervisor on progress. Ensure all procurement documents are archived and accessible as per company requirements.

Qualifications & Skills:

• Diploma / Bachelor's degree in Engineering, Supply Chain Management, or a related field.
• Proven experience in procurement and supply chain management, especially in Electrical & Instrumentation (E&I).
• Strong negotiation skills and vendor relationship management.
• Proficient in procurement software and MS Office (Excel, Word, PowerPoint).
• Ability to work in a team and handle multiple tasks simultaneously.
• Strong organizational and communication skills.
• Knowledge of industry standards and regulations in procurement.

Job Description

• To drive maintenance activities to maintain high efficiency of the equipment and minimise machine downtime as per KPI.
• To lead troubleshooting and root cause analysis of machine delays especially on mechanical faults.
• To develop and implement maintenance plans on all equipment to minimise downtime.
• To monitor cost as per KPI, maintain inventory of spares, liase with vendors and partners and to coordinate activities with other departments to ensure efficient operation.
• To develop, plan and implement automation projects to improve machine safety, reduce human intervention and maximise productivity.

Job Requirements

• Bachelor Degree in Mechanical / Electrical Engineering or equivalent studies
• Minimum 2 years in the maintenance field
• Experienced in automation, mechanical & electrical maintenance in a manufactoring environment
• Safety conscious
• Able to work in a hot and dusty environment

Roles & Responsibilities

As a Technical Sales Engineer, you’ll use your technical know-how to help our clients find the best solutions for their dust collection needs. You’ll be the bridge between our products and the customers, making sure they get the right equipment and support. If you’re driven by problem-solving, enjoy working with people, and have a knack for sales, we’d love to talk to you. The company is entering an exciting phase of growth and we’re looking for someone who’s eager to be part of that journey.

Key Responsibilities:

· Generate new business by promoting and selling industrial dust collection systems.

· To undertake preliminary design, technical review, prepare quotation and sell industrial air filtration machines and equipment.

· Provide technical support to customers, helping them choose the right products.

· Prepare and present quotes and proposals.

· Work with the engineering and operations teams to deliver tailored solutions.

· Build and maintain relationships with new and existing clients.

· Stay informed about industry trends and competitor products.

· Attend client meetings and site visits when necessary.

· Resolve any issues to ensure customer satisfaction.

Salary Package: Basic + Commission + Allowances

Working hours: Mon-Fri, 08:00 - 17:30

Requirements

· Diploma Mechanical/Electrical Engineering or a related field.

· 2-3 years of experience in technical sales

· Strong communication and negotiation skills.

· Able to work independently and manage the entire sales process.

· Possess own transport (transport allowance provided)

Plus Points

Prior sales experience in industrial equipment, dust control, blasting, HVAC systems etc.

Responsibilities

· Responsible for providing preventive maintenance service for BMS (Building Management System)

· Carry out troubling shooting, analyzing and rectification of the system on time

· Support client with system operation and recommendation for improvement

· Data analyzing and determination of the system operation status

· Response client’s request and attend the issue in short notice

· Supervise subcontractor to carry out the work safely

· Provide the assistance to colleague and mentoring actively

· Ensure all works carried out in accordance with the specified quality and EHS standards

· Prepare and submit quotations, including material, labor, and scope of works

· Perform replacement/repair, fit out works/A&A for existing BMS site

· Perform weekly standby on rotation schedule

· Perform calibration and verification of BMS sensors annually

· Provide sales support BMS service and site survey

Requirements

· Diploma/ Degree from a recognized technical institute

· Hands on experience in BMS Control System

· Hands on experience in programming languages and logic gates

· Familiar with digital fundamental

· Knowledge on basic networking

· Strong customer management & problem solving skills

· Excellent communication & presentation skills

· Skilled in the use of MS office

· Knowledge on ACMV system

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Oversee the installation, testing, and commissioning of piping systems on-site
• Ensure piping installations meet project specifications, codes, and standards
• Address any on-site technical issues related to piping and provide solutions
• Coordinate with contractors, suppliers, and other engineering teams to ensure timely and efficient execution of piping work
• Conduct inspections and tests on piping systems and prepare documentation
• Maintain records of piping activities, including work progress, testing, and inspection reports
• Any duties to be assigned from time to time

Pre-requisites

• Bachelor’s Degree in Mechanical Engineering
• Minimum 5 years experience in a similar role
• Candidates are required to have prior experience in power and/or industrial plant projects
• Proactive learner and ability to multi-tasks
• Ability to adapt to dynamic and challenging construction site environments
• Project Location: Jurong Island

Job Responsibilites

• Prepare Master Program and update progress monthly.
• Prepare Progress forecast of rolling programs and update of resources.
• Resolve any instrumentation issues & recording.
• Coordinate with services department about diversion work and schedule.
• Ensure overall site progress are updated according to schedule.
• Prepare monthly progress report for client/consultants.
• Assist Project Manager in the preparation and submission of verified work done to Quantity Surveyor.
• Any other adhoc duties as assigned by management.

Job Requirements

• Possess a Degree Civil Engineering and above or equivalent.
• At least 5 years of experience in construction planning and programme coordination for railway projects.
• Computer literate with proficiency in planning software such as Microsoft Project, AutoCAD, P6 Primavera.
• Experience in LTA Projects will be advantage.
• Willing to be based at project site office and work 5.5 days.