Job Description & Requirements

• Supports technical solutions
• Recognizes problems that are beyond capabilities and is learning from the experts in the area
• Supports new capital equipment purchases and implementation
• Supports cell layouts and process improvement initiatives
• General understanding of Six Sigma and lean tools to improve processes
• General understanding of Design for Manufacturability and Assembly (DFMA) concepts and supports new product introduction
• Represents the company with our customers
• Supports updates to management on operations status
• Learns the steps involved to incorporate process improvements
• Supports the manufacturing floor for any process related questions
• Creates and maintains process documentation and updates work order documentation
• Supports implementation of basic engineering changes
• Adheres to applicable Quality System requirements
• Supports Process Flow Charts, PFMEA, and Control Plans
• Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.

Job Responsibilities

1. Provide front and backend supports for the following security systems:

a. Access Control System – Integrated Security Management System (ISMS);

b. Electronic Key and Cabinet System: Key Management System (KMS);

c. Radio Communications: Digital Trunk Radio System (DTRS);

d. CCTV System – Video Surveillance Management System (VSMS);

e. Entry / Exit Access Turnstiles;

f. Crash Barriers; and

g. Vehicle Alert System

2. Perform corrective and preventive maintenance on all security systems.

3. Ensure critical system fault reported rectified within the shortest possible time to prevent disruption to operation.

4. Update and maintain fault rectification report.

5. Maintain security system stock inventory to ensure sufficient spare.

Job Requirements

• Meet the relevant Regulatory Authority's statutory requirement of minimum 21 years of age.
• Diploma/Higher NITEC/NITEC from a recognized training institute.
• Must be able to work rotating shifts, including weekends and public holidays
• Technical knowledge or experience in electrical/electronic work. IT Network knowledge would be an added advantage.
• Experience in CCTV or card access system.

Location : Tuas (Chemical Production Environment)

Working hours : Monday to Friday

Roles & Responsibilities

• To plan and execute corrective/preventive maintenance on facility equipment and production equipment to ensure good efficiency and availability.
• Implement TPM program in HPSL such as autonomous maintenance and critical spare part management.
• Engage external equipment vendor for service contract and ad hoc diagnostic or corrective maintenance activities.
• Support safety and EHS related activities and audits.

Description of Responsibilities and Duties

• Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
• Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
• Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
• Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
• Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
• Perform site EHSS inspection/audits and ensure that all corrective/ preventive actions are close in timely manner. Responsible for internal/external audits and EHSS activities.
• Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
• Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Requirements:

• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.
• Able to read electrical, hydraulic, pneumatic and mechanical diagrams and carried out maintenance work accordingly.
• Lead and guide technicians on above work.
• Operational hands-on experience
• Work under pressure and multi-tasking.
• A good team player and have good interpersonal skills
• Safety conscious

Education:

• Degree/Diploma in Mechanical Engineering or equivalent
• Minimum 5 years of relevant working experiences
• Experience in chemical and mechanical process

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to [email protected]or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Lee Jia Chian (Jayleen)
EA Personnel Reg No: R24124361

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Laboratory Technician to be part of their Labortory Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Laboratory Technician:

• Assist in routine lab tasks such as paint preparation, panel setup, and airless spray applications.
• Conduct sampling, testing, and analysis for paint products.
• Support chemists in development projects, including managing stock levels for panels, raw materials, and lab supplies.
• Participate in trial applications and inspections outside the lab under supervision.
• Handle non-chemical waste disposal and maintain a safe work environment by following ISO, safety, and environmental standards.
• Communicate progress or delays effectively with the line manager.
• Ensure workplace safety, especially in handling chemicals, and follow preventive measures to reduce risks.

Requirements:

• Diploma in related field
• Entry level are welcome to apply. Training provided.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Day Technician

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range : $2200 - $2500 + $200( Site Allowance )

Responsibilities:

The Day Technician is responsible for Heat Treatment Daily Operations, support shift team on Grade Change Maintenance activities and Day shift Operations.

• In charge of day-to-day operation for Heat treatment unit to ensure quality, safety and production capacity are met according to production plan.
• Lead and support GCM transition activities for HT facility, and main operation in ensuring cleaning activities are done efficiently up to company operation standard before handing over to maintenance.
• Ensure any operational issues are communicated and followed by the maintenance team by working closely with maintenance contractor and coordinator.
• Support the shift team in multiple aspects of operation consisting of off-spec PVA blending, chemical loading/unloading, chemical preparation and GCM cleaning.
• On all activities, report to shift supervisor and day supervisor to ensure daily operation are done safely and according to the requirement.
• Any other duties as assigned.

Requirements:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Job duties:

• Involved in the pre commissioning and commissioning of the plant such as punch list, pressure test and FAT.
• Ensuring plant operations as per guidelines and procedures.
• Lead and coordinates less experience technicians in plant operations
• Perform daily routine checks for abnormalities and data collections
• Perform minor laboratory test
• Involved as ERT in fire drills and emergencies
• Require at least ITE in Chemical Process Technology or above
• No experience required as training would be provided
• Willing to do shift work

Gross Salary can reach more than $4000 per month (Basic + Shift Allowance + Transport Allowance + OT)

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Our firm is currently looking for an experienced, accomplished, self-motivated Electrical Engineer to maintain and support our industry-leading products and systems. The Electrical Engineer will work across a variety of functional groups that are directly involved in engineering, product development, implementation, and international contract manufacturing partners. The ideal candidate is an inventive problem solver that is capable of working through technical challenges and employing pragmatic solutions. This is a fantastic opportunity to join a team that provides integrated services to meet our clients’ needs both locally and across the globe.

Job Descriptions

• Calibration, service and break-fix of instruments.
• Calibration, service of temperature or humidity chamber
• Follow and execute calibration work instructions
• Maintain and control ISO 17025 system of calibration laboratory.
• Any other duties as assigned by the company

Requirements

• Candidate must possess minimum NITEC certificate
• Higher NITEC or Diploma in Instrumentation / Engineering or equivalent is an advantage
• Experience in measuring instruments or calibration is an added advantage
• Proficiency in Microsoft Office (Excel) for capturing and processing measurement data
• Willingness to learn/upgrade and commit to meet assigned tasks in a timely manner
• Self-motivated and able to multitask
• Able to function as a team, and interact with colleagues and customers well
• Proper training will be provided for the expected job scopes
• Minimum 1 year experience in equipment measurement/calibration
• Candidate with prior experience in technical knowledge and experience in related field is welcome to apply
• Applicants must be willing to work in West
• Able to start work immediately or on short notice is preferred

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $10,000 per month

Responsibilities:

• Design and build data pipelines infrastructure to collect, process and store data from various sources.
• Develop data assets platform to provide a centralized repository for managing and accessing data assets.
• Implement automated SQL queries based on user-defined criteria or business requirements.
• Use techniques like query templates, metadata-driven generation, or machine learning algorithms to generate SQL queries.
• Create new IPs in Singapore in area of expertise.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development.

Requirements:

• Degree / Masters / PhD in Computer Science, Data Science, Statistics Applied Sciences or related field.
• Proficiency in Python, SQL, Java or Scala programming languages.
• Understand data warehousing concepts, ETL (Extract, Transform, Load) processes and tools like Informatica, Talend, or Airflow.
• Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra).
• Familiar with Apache Airflow, Kubernetes or Ansible for automating data pipelines and infrastructure.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Manufacturing diverse team of talent. You will be responsible for supervising and coordinating production activities to meet daily and monthly manufacturing goals.

What you will be working on:

• Supervise and coordinate production activities to meet daily and monthly manufacturing goals through the efficient use of manpower, material, and machine; together with proficient methodologies, in a hazardous-free and healthy working environment.
• Plan, strategize and monitor the movement of WIP for maximum throughput, minimum idle time and maintain line linearity.
• Solicit Engineering support to ensure tight focus on areas and variance requiring immediate attention.
• Resolve and handle line-related issues / preventive maintenance and to understand all equipment capacities / constraints so as to identify, handle and resolve bottleneck situations.
• Mentor and train all Manufacturing Leaders and Assistants to develop skills required for efficient MFG operations.
• Execute improvement programs in manufacturing operations in his/her Section.
• Facilitate and participate in quality, productivity and cost reduction improvement.
• Ensure safety, discipline and housekeeping compliance by all personnel and take actions on violators.
• Ensure proper documentation and data-integrity.
• Perform shift duties to support production, as required by Section Manager.

More About You:

• Degree in Engineering
• Preferably 1-3 years relevant wafer fab manufacturing experience.
• Candidates with no experience will be considered for junior role, training will be provided
• Interest in Wafer Fabrication Manufacturing
• Possess leadership quality
• Good interpersonal skills
• Team player
• Good analytical and planning skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

We are representing our client in the global technology and engineering space to look for an experienced Database Engineer. You will leverage your expertise in database management, collaborate with cross-functional teams, and lead projects to enhance the customers database infrastructure.

Responsibilities

• To perform monitoring for all database flavors (MariaDB, PostgreSQL, EDB, Oracle, DB2, MSSQL, Redis, and Mongo) and take appropriate action.
• To perform daily backup monitoring and take action to have recovery solution in place.
• To Manage the database availability and performance, including incident and problem management.
• To work with Major Incident Management (MIM) team to resolve and co-ordinate high critical issues.
• To carry out periodical production patch and upgrade management.
• To work closely with users and vendors to take timely and appropriate steps to resolve and troubleshoot issues impacting service levels.
• To Identify opportunities for process improvements, automation, and efficiency gains in database operations.
• To Implement best practices and innovative solutions to enhance system reliability and performance.

Requirements

• Minimum 3-4 years of relevant working experience as a Database Administrator.
• Must have familiarity with at least 2 databases among Mysql/MariaDB, PostgreSQL/EDB, Oracle, MSSQL, DB2, MongoDB, Redis etc.
• Experience in 24x7 support for critical production systems, scheduled maintenance, and release deployment activities.
• Excellent problem-solving skills

Work Schedule: Mon - Fri, 9am - 6pm

Location: Woodlands & Tampines

Duration: Tentatively 1 year & Renewable

Salary Structure: Basic + AWS

Responsibilities:

HSE Policy Development and Implementation

• Develop, implement, and maintain Health, Safety, and Environmental (HSE) policies and procedures in compliance with local regulations and industry standards.
• Ensure alignment with company policies and international best practices, specifically for the electronic gases industry.

Risk Assessment and Hazard Control

• Conduct comprehensive risk assessments to identify potential hazards and develop strategies for mitigation.
• Oversee the safe handling, storage, and transportation of hazardous substances in line with industry regulations.
• Perform regular site inspections and audits to ensure adherence to safety protocols and address non-compliance issues promptly.

Regulatory Compliance

• Ensure compliance with local government standards and requirements for hazardous substances and safety practices.
• Prepare and maintain documentation for regulatory reporting and ensure the workforce is aligned with legal requirements.

Incident Management

• Investigate workplace incidents, near-misses, and accidents, focusing on root cause analysis.
• Provide detailed reports and recommendations to prevent recurrence and improve workplace safety.

Training and Certification

• Conduct HSE training sessions for employees, contractors, and vendors with a focus on hazardous substances and emergency response.
• Ensure the workforce meets the safety competency levels required for working in the electronic gases industry.

Emergency Preparedness and Response

• Develop and implement emergency response plans, particularly for handling hazardous substances and chemical incidents.
• Organize regular drills to test readiness and update protocols based on feedback and evaluations.

Performance Monitoring and Continuous Improvement

• Monitor HSE performance metrics, such as compliance rates and incident statistics, to identify areas of improvement.
• Collaborate with project managers to implement proactive safety measures and foster a culture of safety excellence.

Qualifications and Skills:

• Mandatory Certification: Certificate in Safety, Health, and Environmental (SHE).
• Preferred Certification: Certificate in Manage Hazardous Substances or other relevant safety certifications.
• Over 8 years of experience in safety management, preferably in the electronic gases, Chemical or related industries.
• Strong understanding of HSE management systems and local government standards, with specific expertise in managing hazardous substances.
• Diploma or higher education in a relevant field, with proficiency in written and spoken English.
• Skilled in Office software (Word, Excel, and PowerPoint).
• Clear thinking, excellent communication skills, and strong organizational abilities.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to [email protected] or please click on “Apply Now” and provide the below details in your resume.

1. Reasons for leaving ALL your employment
2. Current and/or last drawn monthly salary (please provide breakdown)
3. Expected monthly salary
4. Availability

We regret only shortlisted candidates will be notified.

Important Note: Career International - FOS Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA). Please read our privacy statement on our corporate website https://en.careerintlinc.com/

Career International - FOS Pte Ltd

EA License No: 14C6926

EA Personnel: Foong Mei Qi

EA Personnel Reg No: R22106936

1. Come out with design concept and translate concepts into complete detail assembly drawings for production.
2. Design test control apparatus or equipment or develop procedures for testing products.
3. Knowledeable in Solidworks and Autocad.
4. Able to work under pressure with minimum supervision.
5. Good team player.

Responsibilities:

To maintence the facilities and machines such as the paper press machines and iron bar press machines

To maintence the electronic, and make sure it working

To keep the working site in clean and safe

To supervise maintenance technician to ensure daily tasks are carried out as planned

Carry out facilities operations and maintenance work.

Requirements:

At least 3 year’s relevant experience

Having relevant educational certificate is an advantage

Good attitude and self motivated is required

Can adapt the alternate shift

Responsibilities:

• Implement tools for continuous integration and delivery.
• Manage and administrate environments.
• Execute maintenance operations and environment monitoring.

Qualifications:

• Experience with Jenkins, GIT (GitLab), and Ansible.
• Familiarity with DevOps methodology and tools.
• Basic understanding of finance and investment banking.

• Spearhead cost estimation for bids of MHI-AP Singapore. Coordinate with the various vendors as well as construction sub-contractors and assist to achieve the best price for works & materials.
• Collate techno-commercial information from all disciplines including process / mechanical / structural / piping, E&I etc.
• Assist in preparing relevant documents for bid price approval from Senior Management.
• Interact with a project engineers and discipline managers based on the project requirements. Prepare and maintain cost database for multiple disciplines.
• Participate in risk analysis and estimate the cost for each risk category for various bids & projects.
• Assist in the preparation of the Cost Reports of various projects and update forecast cost & actual progress.
• Keep data and records for various projects its estimated cost, actual cost, vendor & construction cost etc, for further analysis and inhouse estimates.
• Any other duties as assigned by Group Manager such as Project Planning & scheduling assistance etc.

Cost Reporting

• Collect various data and update cost report

Cost Estimation

• Study bid document and coordinate / collect data

Risk Analysis

• Understanding & identifying Risk and its mitigation

Planning

• Prepare project schedule and link various activities

Requirements

• Bachelor’s degree or Diploma in Engineering, Business, Accountancy or Construction

Management preferred or equivalent combination of education or experience.

• Fresh graduates or with 1 or 2 years of experience

• Ability to work well as an integral part of a large Project Team that includes all

Engineering disciplines.

• Ability to plan and manage multiple tasks / projects.

• Effective analytical and problem-solving skills.

• Effective communication skills both verbally and in writing with superiors, colleagues,

and individuals both inside and outside the organisation (if required)

• MS office especially MS Excel for preparing cost reports.

• Willing to learn and adapt.

Electrical background, understands autocad and BIM.

Create, check, revise & modify drawings as required.

Well versed with local regulations and requirements.

Attend meetings with clients, coordinate with supervisors on site work progress.

Ensure work done as per approved drawings.

Materials submission, ordering & planning.

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $12,000 per month

Responsibilities:

• Design and build data pipelines infrastructure to collect, process and store data from various sources.
• Develop data assets platform to provide a centralized repository for managing and accessing data assets.
• Implement automated SQL queries based on user-defined criteria or business requirements.
• Use techniques like query templates, metadata-driven generation, or machine learning algorithms to generate SQL queries.
• Create new IPs in Singapore in area of expertise.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development.

Requirements:

• Degree / Masters / PhD in Computer Science, Data Science, Statistics Applied Sciences or related field.
• Proficiency in Python, SQL, Java or Scala programming languages.
• Understand data warehousing concepts, ETL (Extract, Transform, Load) processes and tools like Informatica, Talend, or Airflow.
• Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra).
• Familiar with Apache Airflow, Kubernetes or Ansible for automating data pipelines and infrastructure.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

Full Job Description

Job Description

• Responsible for schedules and forecasts of project development.
• Work with relevant personnel to rectify any electrical/mechanical issues.
• Involve in design works and make sure specifications are in line with Authority’s code of practice and requirement.
• Liaise, coordinate, and monitor project progress to ensure that schedule is on time as planned.
• Prepare method statement, risk assessment, construction drawing, catalogue submission, safe work procedure and all other documents as requested by site.
• Plan, manage and coordinate all site matters, ensuring compliance to Project specifications, regulations and schedules.
• Technical specification review and recommend appropriate resolution.
• Directs, supervises and train technicians on engineering activities on site to meet all project requirements.
• Actively use the right tools to collect and observe data to ensure good coordination with team activities and communicates project status through technical reports.
• Co-ordinate and attend meetings with the Structural, Architectural, and other M&E contractor, sub-contractor, consultant, and client’s representatives to resolve project related problems and issues.
• Monitor project cost activity to take actions on cost deviation.
• Attend and conduct of Factory Testing and Site Testing and Commissioning of system
• Collect all necessary accurate data and share information pertaining to project issues, budgets, and schedules in project meetings.
• Prepare progress report and project handover report.
• Execute other assigned tasks as delegated by immediate superior.

Job Requirements

• Bachelor’s degree/ Diploma in Electrical or Mechanical Engineering or related discipline
• 3 years of working experience in construction industry
• Knowledge for Mechanical, Pumping System, ACMV, CCTV, Electrical or Control System or SCADA system will be an added advantage

• Install, upgrade, support and troubleshoot Windows 7, Windows 8.1, Windows 10 and Microsoft Office
• Dealing with hardware and application support queries and issues reported to the support desk and escalated to the Desktop Support Engineers
• Provide user data and application recovery
• Providing Remotely support.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software
• Use tools and methodologies to load, copy and customize operating system configurations for deployment
• Responsible for tracking hardware and software inventory
• Familiarize end users on basic software, hardware and peripheral device operation
• Take ownership and responsibility of queries, issues and problems assigned to the Desktop Support Engineers
• Works with vendor support contacts to resolve technical issues within the desktop environment
• Escalate issues and involve experts wherever required in order to resolve issues as quickly as possible and any other authorized desktop applications & Microsoft or related security patches/Policies
• Install, upgrade, support and troubleshoot for printers, computer hardware and any other authorized peripheral equipment
• Performs general preventative maintenance tasks on computers, laptops, printers and any other authorized peripheral equipment
• Performs remedial repairs on computers, laptops, printers and any other authorized peripheral equipment
• Customize desktop hardware to meet user specifications and site standards
• Provide VIP support (When required)
• Resolve and update incidents with in SLA and also update stakeholders for P1 cases

Ideally you have

• Min. O-levels or NITEC / Diploma / Degree in Computer Science, Information Technology, Infrastructure Support or related field.
• All candidates with Desktop / IT Support experience (Minimum 6 months of working or internship exp.) or those with related knowledge are all welcome to apply!

Duties and responsibilities

• Supervise and support the installation team on the commissioning, preventive maintenance, troubleshooting equipment and rectification works as well as to provide continual technical support to customers.
• Perform testing, configuration and commissioning of CCTV, Access Control, Intercom and other Security & Communication Systems.
• Project management and documentation

Requirement

• Minimum of 5 year’s industry experience working within security installations, servicing, or design.

• Relevant degree or Certifications in Electronic Engineering.

• Highly organized and detail oriented.

• Ability to work independently under minimal supervision.

• Knowledge of networking (e.g. Cisco, TCP/IP, routing, switching)

Key Responsibilities:

• Effective management of the production operations.
• Ensure effective and efficient use of materials, manpower, machines, and equipment so as, to minimize wastage, reject downtime, and reworks.
• Implement quality, safety, and environmental policies to comply with company and statutory regulations.
• Continually seek to improve productivity by recommending and initiating policies, procedures, and methods.
• Meet or exceed customer requirements, not limited to quality standards and delivery.
• Performs other duties as assigned.

Requirements:

• Minimum Diploma in Engineering related field.

• Proficiency in monitoring and managing network systems, servers, and infrastructure.
• Knowledge of network protocols (TCP/IP, DNS, DHCP, etc.) and tools (e.g., SolarWinds, Nagios, or PRTG).
• Familiarity with cloud platforms (AWS, Azure, GCP) and virtualization technologies (VMware, Hyper-V).
• Understanding of ITIL processes for incident, problem, and change management."
  
  Must have Talent / Skills
  
• High attention to detail and proactive mindset.
• Ability to work under pressure during critical incidents.
• Strong organizational skills for managing multiple tasks simultaneously."

Job Description & Requirements

• Assistant the Project Manager in overseeing the project, planning and ensure work is carry out according to master program
• Liaise with the consultant on technical issue and doing coordination on site issues with sub con
• Work with project team and ability to resolve technical issues
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil) or equivalent.
• At least 2 year(s) of working experience in the related field is required for this position.
• Experience in building projects.

Statement Of Purpose (Overall Purpose of Job)

In charge of the execution of all Solar Installation works inclusive of planning, scheduling, controlling, coordination and ensure works carried out are in accordance to approved shop drawings / specification and complete within the completion date. In addition, budget control and contract administration.

Major Duties & Responsibilities
(A) Specific :

• Evaluate costing received for electrical works.
• Vet through shop drawings to ensure all are in compliance to technical specifications / authority requirements prior to submission.
• Liaise and have meetings with Clients and Consultants on technical resolution / clarification, inspection and submission.
• To be the lead contact point for all Project issues.
• To attend weekly site meeting.
• To build and maintain strong, long-lasting client relationship and meet Client’s expectations.
• To manage, coordinate, work and oversee all workers, sub-contractors and vendors to ensure proper work execution and good workmanship.
• To plan, implement, track the work progress and submit weekly progress report so as to ensure that the project executed is on time and within budget.
• To monitor project cost including variation works and submission of supporting documents.

(B) General :

• To prepare and submit progress reports.
• To maintain proper documentation for all projects.
• To coordinate and work with other departments.
• To engage, coordinate and oversee all project works to ensure successful completion and handing over to Clients.
• Other duties as assigned.

(C) Safety:

• To follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• Degree or Diploma in Electrical Engineering or Equivalent.

(B) Knowledge & Skills :

• Well-versed with installation of M&E services and builder’s works.
• Experience in Design and Delivery Execution of Solar System Works and Load Sizing Of Solar Systems.
• Good interpersonal skills.
• Independent & Team player.
• Proactive and able to take initiative.
• Good in negotiation.
• Good communication skills (verbal and written).
• PC literate and knowledge in MS Office.

(C) Experience :

• Minimum 3 years of relevant experiences.