- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

We regret that only the shortlisted candidates will be notified

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

Job Description

• Industry/ Organization Type: Chemical Distributor
• Position Title: SHE Manager (Chemical)
• Working Location: West – Tuas
• Working Hours: 5 days (Monday to Friday: 8 am-5.30 pm)
• Salary Package: Up to SGD 6000 + AWS + Variable Bonus + Yearly Increment
• Duration: Permanent

Key Responsibilities

• Support the Managing Director and collaborate with QSHE teams to ensure the understanding and implementation of corporate SHE strategy, guidelines, and processes.
• Develop and communicate the Company SHE strategy, design effective long and short-term implementation plans, and oversee projects from conception to completion.
• Report SHE non-conformities and incidents, and manage them collaboratively with the Corporate QSHE Team.
• Lead SHE programs, audits for certifications, coordinate site audits/assessments, manage SHE competencies, and deliver training sessions.
• Conduct SHE audits for third-party service providers and support the Commercial Team with SHE advisory for dangerous goods.
• Oversee annual SHE performance goals, lead and manage the SHE team, and ensure contractor safety leading to zero harm.
• Engage with customers and internal staff on SHE matters, provide advice on controls and protective equipment, and regularly review SHE systems for continuous improvement.
• Liaise with external entities to maintain licenses, permits, and certificates and ensure compliance with statutory obligations.
• Hold and fulfill responsibilities related to SHE legal roles like Fire Safety Manager and Workplace Safety and Health officer.
• Coordinate emergency preparedness exercises and support the implementation of Site Safe Management Measures (SMM).
• Conduct SHE committee meetings, ensure adherence to the bizSAFE level 5 standards, and manage site risk assessments.
• Perform incident investigations with root cause analysis, understand the Singapore Safety Case regime, and implement standards and best practices.
• Ensure sites comply with SHE legal requirements, maintain the SHE Legal Register, and be proactive and responsive in compliance and emergency situations.

APPLY NOW!!!

• Min. Diploma in Workplace Safety and Health Management or Engineering related
• Min. 5 years of SHE working experience with managerial experience
• Preferably have experience in the Oil & Gas / Chemical industry
• Familiar with behavioural-based safety, fire safety, hazardous materials and DG management
• Having experience in distribution/logistics is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66208 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Maintenance Coordinator

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range: $4000 - $5000 + $200 (site allowance)

To coordinate Maintenance Activities between Production and Technical department. Support GCM/SDM MA & MO activities. Support work permit and authorization activities.

Responsibilities:

• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan.
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed.
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well.
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage.
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up.
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production.
• Support work permitting and work authorization activities.
• To perform any other duties or assignments as assigned by superiors.

Requirements:

• Related working experience in the chemical industry.
• Diploma/Degree in relevant field.
• Minimum 2-3 years of experience in maintenance planning and coordination.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

• Basic Up to $2400 (depends on experience)
• Allowances: Transport $80 + Attendance $40
• Perm role - 14 days A/L+ AWS+ Bonus+ Medical & Dental benefits
• Mon – Fri / 8.15am - 5pm
• Location: Tuas (with transport at Lakeside MRT)
• **Training provided for no experience

Responsibilities:

• Conduct inspection and lab testing on chemical samples
• Documentation of testing records
• Resolve non-conformance and defects issues

Requirements:

• Min. Nitec/ Diploma in Chemistry related field
• 0-2 years experience

For consideration, kindly submit your CV by clicking “APPLY Now” or email to [email protected]

**Only shortlisted candidate would be notified**

Teo Hui Yee R22105757

Job Description

• Industry/ Organization Type: Chemical Manufacturer/ Production
• Position Title: Sales Manager
• Working Location: Tuas (Walking distance to Tuas Crescent MRT)
• Working Hours: Monday to Friday, 8.30 am – 5.30 pm
• Salary Package: Basic + Commission + Transport Allowance + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Actively pursue new customer accounts and promote the full range of the company’s products and services.
• Manage customer accounts throughout the pre-sales and post-sales process, including handling sales inquiries, preparing and presenting quotations, and coordinating with operations and production teams to ensure goods are ready and delivered on time.
• Develop and implement effective sales strategies and product penetration plans to meet sales and business goals, including revenue, margin, and market share targets.
• Collaborate closely with the Director to prepare tender documents, determine pricing, and submit tenders promptly.
• Provide exceptional customer service to ensure customer satisfaction and build long-term relationships with key, existing, and potential customers.
• Communicate with suppliers to ensure timely product delivery and stay informed of product developments.
• Conduct supplier sourcing activities, evaluate product quality against requirements, and follow up on logistics after purchasing.
• Prepare weekly sales reports and summaries of sales activities.
• Ensure all necessary documentation complies with ISO 9001, ISO 14001, BizSafe, and other relevant safety standards.

APPLY NOW!!!

• At least a Diploma in Business, Marketing, or Chemical Engineering.
• Minimum 2 years of related working experience in Chemical Sales.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68682 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Duration: 6 months or longer

Location: Gul Lane (Company bus available from Boon Lay, Jurong East, CCK, Outram, and Bedok MRT)

Salary: Up to $5K

Working Hours: Mon-Fri, 8:15 AM - 5:00 PM

Job Scope:

Process customer orders and enquiries via email, fax, or phone

Follow up on billing and generate monthly reports

Coordinate with customers and sales on order status

Ensure smooth deliveries and resolve issues

Handle export shipments and prepare shipping documents

Investigate and resolve complaints

Ensure compliance with NEA and SPF regulations

Perform ad-hoc duties as assigned by the manager

Requirement:

-Min. Degree

-Has prior SAP knowledge

-Experience in SC shipping

If you meet the requirements of this role, please email a detailed resume to [email protected] or telegram @alexgohhl

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

• MNC Company
• Basic $4000 - $5500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Working Location: Jurong Island (Transport Provided)

Job Responsibilities:

• Responsible for setup of QC Laboratory at new site, including management and training of Laboratory analyst, Laboratory system establishment and management to achieve safe and stable commissioning and startup of the new plant
• Interpret laboratory results that are outside of the technical ability of the Lab Analysts
• Review all process and final product test results to check for validity and possible quality-related issues
• Assist quality lab manager in classification for final product and compounding lots
• Assist quality lab manager to develop and implement QC specifications and standards
• Assist quality lab manager to establish lab system according to HSEQ requirements
• Conduct method development and validation, review and upkeep SOP of test procedures, calibration procedures and analytical instruments
• Analyse, review and troubleshoot reliability issues of laboratory equipment and analysis problem and develop practical solutions
• Liaise with vendors to troubleshoot and maintain laboratory equipment
• Develop, implement, and follow calibration plan for equipment to ensure lab data is always accurate, consistent, and repeatable
• Manage lab external agency audits and management systems certification compliance
• Support Manufacturing, Quality, Sales, and Product Management functions
• Assist lab manager, production, or other departments with special projects, as needed
• Lead Special lab Projects and new grade trials
• Implement and participate in safety and quality improvement activities
• Evaluates reported results for consistency with plant process conditions
• Trains laboratory personnel on new instruments and procedures as needed
• Conduct internal audits on the proper execution of test methods
• Liaise with Supplier, execute procurement process and receipt
• Monitor and follow up on daily lab analysis result for accuracy and troubleshooting
• Task as assigned by QC Manager

Requirements:

• A bachelor's degree in chemistry or related field
• Min 5 years’ experience in analytical lab with manufacturing facility
• Experience required in new Laboratory set up, system establishment.
• Experience required with GC, ICP, GC-MS, Antek, KF, IR, UV, Extruder, DSC etc

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description:-

• Plan and execute work plans on site.
• Prepare weekly progress reports and weekly work plan on project work.
• Work with design engineers for as-built drawings, section drawings.
• Supervise and monitor workers / welders on site for installation or maintenance.
• attend site meetings with clients / architects and authorities on project technical matters.

Requirements:-

• Minmum Diploma in either mechanical or Mechatronics Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• Has work experience in construction sites and project management.
• Responsible team player with the ability to work independently in challenging projects and timelines.

• Plan and execute work plans on site.
• Prepare weekly progress reports and weekly work plan on project work.
• Work with design engineers for as-built drawings, section drawing.
• Work with purchaser to source & make orders for all materials required and purchase the required materials according to project timeline.
• Supervise and monitor workers / welders on site for installation or maintenance.
• Attend site meetings with clients / architects and authorities on project technical matter.

Requirement:-

• Minimum Dipoma and Degree in Mechanical Engineering.
• Required skill(s) MS Office, MS project, Autocad.
• Has work experience in consruction sites and project management.
• Responsible, detail-oriented and able to multi task.
• proactive team player with the ability to work independently in challenging projects and timelines.
• Possess Class 3 driving license will be an advantage.

Responsibility

• Co-ordinate and supervise site works and subcontractors.
• Keep track of the site schedule to ensure works are on time.
• Able to interpret drawings and calculations of site materials
• Liaise with QS to monitor work schedule , claim and Vos.
• Report to Construction Manager / Project Manager on site matters and progress of work.
• Attend to site meetings
• Compliance to safe work procedures and maintain good house-keeping

Requirements:

• At least Bachelor's Degree or equivalent in civil engineering or equivalent.
• At least 5 years experience in civil engineering , relevant experiences in construction of civil infrastructure project , LTA project.
• Practical experience and knowledge of tendering works
• Good command of English
• Able to draw 2D / 3D

1. Create simple lighting designs for external Design offices/Clients and Sales representative/Sales manager. Lighting designs may include:

• request analyses (availability of all necessary input parameters, if request is in accordance with norms, suggest alternative proposals in accordance with good lighting practise)   
• lighting calculations performed within in house or external lighting software,
• luminaire specifications and descriptions
• elaboration of alternative proposals
• technical application notes (technical reports),
• drawings with luminaire disposition and all necessary details and/or visualizations.

1. Provide simple lighting calculations according to the requirements:

• inputs parameters analyses
• perform lighting calculations and analyses with alternative proposals and/or competitor analyses.

1. Provide necessary support in creation of city lighting reconstruction studies:

• inputs parameters analyses (road geometry, existing lighting installation, road categorization),
• on-site data collection
• determination of typical street profiles in accordance with road geometry and lighting class
• perform lighting calculations and analyses with alternative proposals and/or competitor analyses.

Prepare street lighting categorization proposal, perform lighting calculations and analyses with alternative proposals in cooperation with direct Manager / responsible Sales rep/ Sales manager.

1. Consideration and application of the relevant lighting standards.

1. Develops, implements and/or delivers product training / presentations for Clients (e.g. Ulysse, training, ...).

1. Organize and perform on-site lighting trials and provides after-sales technical support in fine- tuning (e.g. decorative illumination).

Coordinate with the engineering team and provide detailed drawings for installation

Updating layout, panel drawings for approval and as-built submissions.

Other ad-hoc duties that may be assigned from time to time

At least 5 years working experience in the construction industry （Electrical Works )

Basic knowledge on MEP construction works

Experienced with AutoCAD software

Chinese speaking preferred

JOB DESCRIPTION:

• Hands on experience in design, implementation of Splunk architecture.
• Experience on Linux and Windows administration
• Able to do data onboarding, fields extraction according to Splunk best practices.
• Able to provide Splunk guide and Splunk operation document
• Able to setup forwarders and onboard new data sources into the environment.
• Able to troubleshoot and identify Splunk issue relating to performance and searches.
• Able to fine tune Splunk use cases (rule) and optimize searches performance.
• Able to create new dashboard to enhance the visualization of the data and create Splunk use cases for alerts/reports.
• Knowledge on index segregation and user restriction setup
• Knowledge on using Splunk Enterprise Security
• Able to do Common Informational Model for Enterprise Security.
• Good in communication and able to understand the requirements.

Performs site engineer responsibilities for

managing all aspects of the construction,

installation, maintenance, and repair of

electrical power lines, electrical systems,

fixtures, apparatus, and appliances.

This individual is responsible for planning,

scheduling, assigning, participating in, and

inspecting the works of power linesmen,

electricians, and trades helpers. The employee

also has responsibility for supervising the

operation of an electrical repair shop. Work

includes the design and construction of

special electrical apparatus and fixtures and

the preparation of specifications and

estimates for construction, repair, and

installation projects. Large scale and complex

jobs are normally inspected upon completion

for conformance with specifications; smaller

jobs are checked for satisfactory operation by

the users of the equipment. Work is

performed under general direction of an

administrative superior and is reviewed

through discussions and inspection of

completed work.

DUTIES AND RESPONSIBILITIES

Plans, assigns, schedules, and supervises the

work of power linesmen, electricians, and

helpers engaged in the construction,

installation, maintenance, and repair of university power lines, electrical systems, fixtures, apparatus, and appliances;

participates in the more difficult work.

Trains and instructs subordinates on detailed

procedures. Conducts periodic inspections and gives onsite

supervision over hazardous or unusual

work assignment is; assures availability of

equipment, materials, and supplies.

Estimates the time and material costs

required for projected jobs; keeps cost and

job records and submits reports; initiates

requisitions for supplies, tools, and

equipment. Troubleshooting of all Electrical &

ELVS PLC Knowledge preferred

Perform & Supervises the installation of all

Electrical & ELVS

Enforces safety regulations, rules, and working

conditions.

Recruits and trains personnel in the safe

operation of equipment and tools.

EDUCATION AND EXPERIENCE:-

Degree or Higher ; 4 years of related

experience including site engineer or lead

experience and considerable experience as a

Lead Site Engineer or any equivalent

combination of training and experience.

Excellent communication skills.

KNOWLEDGE, SKILLS AND ABILITIES:-

Thorough knowledge of the practices,

methods, equipment, materials, and tools of

the electrical trade.

Thorough knowledge of the occupational

hazards and safety precautions of the work.

Ability to supervise the work k of skilled

workers.

Considerable knowledge of the National

Electrical Code for electrical installations.

Ability to interpret and work from instructions,

pencilled plans and sketches, and blue prints.

Ability to communicate and coordinate with

superiors, subordinates, vendors and Ability to estimate materials and labour costs.

Skill in the use and care of all hand and shop

tools and equipment of the electrician's trade.

n the broadest sense, project managers (PMs) are responsible for planning, organizing, and directing the completion of specific projects for an organization while ensuring these projects are on time, on budget, and within scope.

By overseeing complex projects from inception to completion, project managers have the potential to shape an organization’s trajectory, helping to reduce costs, maximize company efficiencies, and increase revenue.

The exact duties of a project manager will depend on their industry, organization, and the types of projects that a PM is tasked with overseeing. But across the board, all project managers share responsibilities across what’s commonly referred to as the “project life cycle,” which consists of five phases (or processes):

• Initiating
• Planning
• Executing
• Monitoring and Controlling
• Closing

• Perform preparation of design specifications
• Incorporate special features which relate to the project at hand into specifications. These include order of work, physical conditions at the site, construction work schedules, method of payment and measurement, construction procedures and special methods, and coordination with contractors and other stakeholders
• Perform technical review on specifications to ensure clarity, completeness, and exactness, and to remove restrictive descriptions so as to ensure competitive bidding
• Prepare project for advertisement by compiling contract specification into Electronic Bid Set (EBS)
• Visit proposed project site to obtain necessary information for use in creating project specification. This include condition and location of project site, location of storage and staging areas, and character and scope of work
• Provide guidance and technical advice to various persons and departments, including engineering personnel, Branch Chief, Section Chief, Engineering and Construction Department, and Architect-Engineer firms where necessary to develop basic specification procedure and policies to cover new types of projects and structures, and to make clearer various phases of the construction work
• Communicate with higher authorities on issues concerning specifications, engineering interpretations and explanations, supply of items, and items of work, and offer recommendations on reviewing specifications.

Responsibility

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

Design and build the DWH database models (star schema).

Manage the semantic model in Oracle Analytics Cloud to provide a unified view of our organization's data.

Manage application roles and access rights for end users including row level security filters, to protect sensitive data.

Work with ETL specialists, IT business Consulting as well as external vendors to ensure data ingestion and integration into the database model

Collaborate with Business Controlling and business counterparts on new reporting requirements.

Ensure data quality, security and compliance with industry standards and internal guidelines.

Ensure proper documentation of data infrastructure, data models, workflows as well as security concepts in accordance with internal security policies.

Skills

Looking for a Data Engineer more focused on Database modelling, Currently in Oracle environment and going forward with GCP stack.

Proficiency in SQL and data warehousing

Strong understanding of data modelling techniques and hands on experience building database models (star schema).

Expertise with ETL (extract, transform, load) processes. Familiarity with BI tool integration such as Tableau or Looker

Strong analytical thinking, problem-solving capability, and ability to translate business needs into technical specifications.

Customer-oriented with good communication and interpersonal skills.

• AUTO CAD Drafting for building & Steel Plate NESTING.
• Have a good knowledge in CAD MATIC.
• Preparing Engineering Drawings and steel weight checking.
• QA / QC Document controller.
• Have a good knowledge in M.S OFFICE.
• Material taking off for fabrication.(MTO)
• -Preparing Dimensional Reports

• Checking and inspecting the quality of works during construction.

• Checking actual construction according to drawings and specifications.

• Coordinate with the clients for whatever revision on drawings and in

actual Construction and Submit weekly site works progress report to

the client.

• Project Planning.

• Materials and Resources Forecasting and Procurement process.

• Execution of the Entire Building’s Structures and Finishes with Project

Team for smoothing the work progress.

.Office Administrator works

Responsibilities

- To assist Project Manager on the day-to-day management of the site, including supervising and monitoring the site labourforce and the work of any subcontractors

- Liaising with local authorities, client's representatives, sub-contractors and consultants.

- Checking and ensuring all plans and work are as per specifications

- Resolving any technical difficulties and problem that may arise on site.

Requirements

- Degree holder in Construction/Building or related discipline.

- Minimum 2years experience from Contruction background.

- Positive personality and good team player.

- Meticulous and responsible.

- Able to multi task and work in tight schedules.

- Able to start with short notice would be an advantage,

Main duties:

• Instrumentation team profile selection.
• Instrumentation works follow-up, correcting deviations with respect to the foreseen schedule.
• Instrumentation progress reporting.
• Interface with the Client
• Identification and assessment of client requirements out of scope.
• Works assignment within the instrumentation team.
• Co-ordination with other design disciplines,scheduling, cost control, Procurement and TR project management.
• Meetings with suppliers.
• Revision and approval of all instrumentation documents.

Main requirements:

• At least 5 years of experience in the same position in oil and gas projects.
• Enforcing obedience to Safety and Environment regulations, reviewing safety and environment manuals. Ensuring operational readiness off all emergency equipment in the Contractor.
• Knowledge of drafting tools: AutoCAD, uStation
• Experience in Fieldbus design
• Experience in DCS/ESD/F&G specifications.
• Knowledge of Process design.
• Knowledge of up-to-date instrumentation technologies and suppliers
• Proven experience in detail engineering of industrial plants.
• Intools expert user.
• Experience and understanding the EHS requirements

Working Place: Jurong Island

JOB DESCRIPTION (ROLES AND RESPONSIBILITIES)

• Perform route mapping and navigation testing
• Assists in setting up the servers and other peripherals needed for robot operations
• Execute hardware and system upgrade or modification
• Provide technical support to the Service Team for Tier 3 - Software and System issues whenever necessary
• Conduct training to the Product Operators and Service Team for the newly setup system, equipping them with product operations and basic troubleshooting knowledge
• Coordinates with stakeholders, ensuring effective communication and providing regular progress reports
• Escalate higher level issue whenever necessary
• Prepare and submit relevant Operations documents as needed
• Execute ad hoc tasks on behalf of the Robotics Operations Team as needed

SKILLS AND QUALIFICATIONS

• Diploma, Bachelor’s or Associate’s degree in Mechanical/Electrical/Computer Engineering or other related fields
• Proven relevant work experience of at least 2 years
• Strong background in Autonomous Mobile Robots (AMR) and Automated Guided Vehicles (AGV)
• Familiarity in mechanical/electrical hardware installation, setup and troubleshooting
• Familiarity in system/network installation, setup and troubleshooting
• Familiarity in AutoCAD, ElcoCAD and any other design and planning software
• Familiarity of LINUX (Ubuntu) System and software troubleshooting will be an added advantage
• Ability to read and interpret mechanical / electrical prints and other related technical documentation
• Strong working knowledge of equipment, tools and components used in the industry
• Proficiency in using computers and basic applications such as MS Word, Excel and Powerpoint
• Ability to work independently and remain professional under pressure
• Ability to clearly communicate with colleagues and end users

ADDITIONAL REQUIREMENT

• Willing to travel locally in a short notice
• Comfortable to work overtime as needed
• Willing to be deployed overseas as needed

Work closely with project managers and stakeholders to coordinate project resources and information, ensuring that the project requirements are met. As a Project Engineer (PE) you will be responsible for working across multiple teams while executing project plans and revising as appropriate to meet changing needs and requirements.

Project Tasks

• Discipline in detailed documentation and reporting of projects plan, project status and issue logs.
• Identify and schedules customer-facing meetings to assure effective completion of projects Manages day-to-day operational aspects of a project schedule.
• To assist in install, setup, testing and provide technical support for the product installation team.
• Monitoring compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
• Review technical documentation of projects and implementations as well as service deliverables.
• Manage customer relations by fostering productive and effective relationships with business users.
• Timely escalation of critical situations and any likely project risk that can impact project delivery scheduled to Manager.
• Effectively and accurately set client expectations and deliverables.
• Write documents describing functional specifications, protocols, test cases and maintenance guidelines for medical equipment.
• Keep documentation of implementation on all medical equipment.

Requirements

• At least 4 years of experience working in the IT industry, preferably involved in project delivery adopting SDL
• Familiar with Networking, Microsoft Operating System and SQL Server
• Relevant experience or interest in project management will be highly advantageous
• Excellent communication skills (both written and verbal) and interpersonal skills
• Great attention to details and results-oriented
• Ability to influence and present to the leadership team
• Committed to the values of integrity, accountability, transparency, scientific rigor and drive
• Good verbal and written communication skills

Element has an opportunity for an Calibration Engineer to join our rapidly expanding team.In this role, you will manage the equipment calibration within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore. The Calibration Engineer is responsible for calibrating equipment and maintenance of records throughout the Element Singapore and Malaysia business units.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Calibration of Equipment: (a) Perform regular calibration of testing and measurement, equipment to ensure accuracy and compliance with standards. (b) Verify and adjust instruments to meet technical specifications and industry guidelines.
2. Documentation and Reporting: (a) Maintain detailed calibration records, including test results, adjustments made, and equipment performance trends. (b) Generate calibration certificates and reports as required.
3. Compliance and Standards: (a) Ensure all equipment adheres to international, national, and organisational calibration standards (e.g., ISO/IEC 17025). (b) Support audits by providing necessary calibration documentation and demonstrating compliance.
4. Equipment Maintenance: (a) Monitor the performance of equipment to identify potential calibration or maintenance needs. (b) Conduct preventive maintenance and troubleshoot issues to minimise downtime.
5. Procedure Development: (a) Develop, review, and refine calibration procedures for various equipment types. (b) Standardise processes to improve efficiency and reliability.
6. Collaboration with Teams: (a) Work closely with the Quality team and Operational teams to address calibration needs. (b) Provide technical support and guidance to resolve instrument-related issues.
7. Training and Knowledge Sharing: (a) Train team members on proper calibration techniques and the importance of maintaining equipment accuracy. (b) Stay updated on new calibration methods, tools, and industry advancements.
8. Risk Management: (a) Identify risks associated with uncalibrated or faulty equipment and implement strategies to mitigate them. (b) Perform root cause analysis for calibration failures or discrepancies.
9. Inventory Management: (a) Maintain an inventory of calibrated tools, instruments, and reference standards. (b) Schedule periodic calibration and ensure timely replacement of outdated or damaged equipment.
10. Data Analysis and Trend Monitoring: (a) Analyse calibration data to identify trends, deviations, or potential areas of improvement. (b) Recommend corrective actions to improve equipment reliability and accuracy.
11. Regulatory Support: (a) Assist in external and internal audits by providing accurate calibration records and ensuring compliance with regulatory requirements.
12. Innovation and Process Improvement: (a) Propose and implement enhancements in calibration methods, technologies, and practices to increase efficiency and accuracy

Job Requirements:

• Minimum Bachelor Degree in in Materials Science or Materials Engineering
• Experience of working in an ISO / IEC 17025 calibration environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Ability to collaborate with colleagues and work effectively as part of a team.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.