Resident Engineer

Available job sites at various locations:

- Ang Mo Kio

- Jurong West

- Bugis

- Hougang

-West Coast

Description:

-To assist Qualified Person (Supervision) in ensuring the works is carried out in accordance to approved drawings

- Manage a team of Resident Technical Officer(s) in performing their duties on site supervision

- Liase and conduct inspection with Contractor and Consultant

- Oversee all aspects of the project and keep record of works, materials, attend meetings, keeping minutes of meetings and discussions etc.

Requirements:

- Accredited as a Resident Engineer with IES/ACES

-Degree in civil and structural engineering from a University accredited by the Professional Engineers Board, Singapore

-Literate in English and have a good knowledge to use computer softwares. E.g. Microsoft office

-Experience in LTA project sites would be a plus

(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• MIn 3 years QAQC experiences in building projects.
• Detail-oriented and have strong communication skills and able to work with people from all levels.

About the Role

We are seeking a full-stack engineer to join our fast-growing fintech startup. You will work closely with the leadership team to define the product and technology direction, with ample opportunities for growth and flexibility.

You Will...

• Own ideas from inception to execution.
• Work directly with the founders to define the product and engineering roadmap.
• Design and implement backend functionality, architecture, and more. You will work independently, be self-directed, and deliver innovative solutions.
• Pave the way for the company to scale to millions of transactions and power unique digital commerce flows.

Skills We Would Love to See

• Design, develop, and maintain web backend applications using TypeScript, Kotlin, AWS Lambda, microservices frameworks, and PostgreSQL.
• Implement automated continuous integration and deployment (CI/CD) pipelines using tools such as GitHub CI, CircleCI, and AWS CDK for infrastructure as code (IaC).
• Design and implement automated testing using frameworks such as Jest and Playwright.
• Develop and maintain APIs using frameworks like Express and Fastify with OpenAPI specifications for external systems, such as online e-commerce platforms or alternate payment methods.
• Develop and maintain integrations with external systems, including payment network providers, financial institutions, payment gateways, and POS terminals.
• Write clean, maintainable, and efficient code that adheres to best practices and coding standards.
• Participate in code reviews and contribute to improving coding standards and processes.
• Collaborate with cross-functional teams to identify and solve complex technical problems.
• Stay up-to-date with emerging technologies and industry trends, proposing new technologies and tools to improve our products and services.

Nice to Have

• Experience with cloud computing platforms such as Amazon Web Services (AWS) or Microsoft Azure.
• Experience with containerization technologies such as Docker and Kubernetes.
• Experience with microservices and serverless architecture using tools like Docker, Kubernetes, AWS Lambda, and AWS API Gateway.

Minimum Requirements

• Bachelor’s or Master’s degree in Computer Science or a related field.
• 0-5 years of experience in developing software applications.
• A good understanding of software design principles and architectural patterns.
• Effective written and oral communication skills, along with excellent interpersonal skills.

Why Should You Join Us?
Open Fabric is a fintech platform that simplifies digital payments and removes friction in the payment process. We operate primarily in Southeast Asia, working with credit and payment providers to help them expand merchant acceptance. Our goal is to create a seamless and efficient commerce network that offers consumers maximum choice and convenience.

Our team comprises industry veterans with years of experience in the fintech space. We are also backed by leading venture capitalists, enabling us to pursue ambitious goals and push the boundaries of what’s possible in online payments.

We are currently looking for talented individuals to join our team and help us achieve our mission. We offer a dynamic and fast-paced work environment where you'll have the opportunity to work with driven and passionate individuals. If you're excited about the problem we're solving and eager to make an impact, we'd love to hear from you.

How to Apply
Come join us! Email your resume to [email protected].

• Bachelors degree in computer science, Information Technology, or related field.
• 5-8 years of experience in Network Engineering Architecture.
• Professional certifications such as CCNP, CCIE, JNCIP, JNCIE, or equivalent are highly desirable.
• Extensive experience in network engineering, including hands-on experience with high-level troubleshooting and network architecture design.
• In-depth understanding of networking protocols (e.g., BGP, OSPF, EIGRP, MPLS) and network security practices.
• Proficiency with network diagnostic, monitoring, and analysis tools.
• Strong analytical and problem-solving skills.
• Excellent communication and interpersonal skills.
• Ability to work independently as well as part of a team.

EA Number: 11C4879

Our client, a leading company in Singapore, is expanding. They value self-development, career progress and most importantly a healthy working culture. Join them in this exciting journey as a:

Service Engineer

Job description

1. Perform the maintenance service in a proper and correct manner as stated on the checklist

2. Attend emergency breakdown service as instructed by the team leader

3. Carry out testing & commissioning for A&A work and run the small size of project

4. Provide technical support to the Application Team

5. Co-ordinate with the Project and Application departments and provide necessary support when required by the Team Leader

6. Support the systems testing related activities with the Project and Application Teams

7. Liaise with sub-contractor to perform site survey for A&A work and to provide detailed information on equipment quantity and method for the installation to the relevant parties for preparation of quotation

8. Deliver good standard of workmanship and ensure accurate quantity and quality of the equipment to be installed at site

9. Conduct in-house training when is required

10. Perform standby duty and other ad hoc duties as assigned

Key Requirements

• Diploma/ Degree in Mechanical/Electrical/Electronic Engineering
• 2 years’ experience in security systems
• Strong knowledge in network and security systems, able to troubleshoot and rectify the network and systems related issues.

Remuneration:

• $2,500.00 - $3,600.00 per month

Work Arrangements:

• Work Location: In person

Please submit your updated and comprehensive CV to: [email protected] for a P&C discussion. Your CV should be updated and in MS WORD FORMAT ONLY (NOT PDF) with full career details, stating current or last drawn salary with full breakdown such as base, incentives, AWS, etc. and expected salary, contact details, educational qualifications, working experiences, reasons for leaving each past employment(s) and availability date.

For quicker processing, please indicate the position applied for on the subject header. We regret to inform that only shortlisted candidates will be notified. However, if you are not selected, we will explore other positions for you, in the near future. All applications will be treated with the strictest confidence.

What our client offers

Our client offers an attractive remuneration package, a fast-paced and exciting working environment and provides challenging opportunities for career advancement. They care about their employees. They are not just an employer. They are a Team. They do not just offer you a job, they offer you a career. By joining their team, you will find a strong purpose and deep meaning in everything you do. You will have the chance to make a real difference for customers, working alongside a passionate team of like-minded colleagues, while building your knowledge/skills and developing your career in a fun, dynamic and fast-growing organization.

Our client advocates fair employment practices, recruits talents based on merit and fit with their corporate values and complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. They are committed to achieving diversity and creating an inclusive working environment. They welcome all applications irrespective of social and cultural background, race, gender, age, religious belief or nationality.

Personal Data Protection Statement for Job Applicants

Please be informed that the personal data you provided by way of your job application to Grace HR Solutions will be collected, used and disclosed by or on behalf of Grace HR Solutions to determine or investigate your suitability, eligibility or qualifications for employment with Grace HR Solutions and/or its clients and manage your application for employment with Grace HR Solutions and/or its clients including identifying you as potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Thank You!

ANDY LUCAS | CEI No: R24123824 |

Grace HR Solutions | EA Licence No: 22C1305 |

UEN: 53456396A

Company Overview

Grace HR Solutions is a boutique professional recruitment consultancy involved in the recruitment of permanent, contract, and temporary positions. We are fully committed to achieving excellence in every assignment through leveraging our vast candidate pool, industry connections, and strategic insights. As the total recruitment and staffing solutions partner, our goal is to provide our Clients the best staffing solutions through an integrated database network supported by localized content and services. We strive to be efficient and effective in matching the right candidate to the right job. Reach out to us to discover even more about how we can help you with all your staffing needs or your own career

Job Type: Full-time

Pay: $2,500.00 - $3,600.00 per month

Schedule:

• Monday to Friday

Location:

• Singapore (Preferred)

Work Location: In person

This position is responsible for the efficient operation, maintenance and repair of the physical structure, utility services, equipment, fixtures, and furnishings of the hotel facilities.

• Work with supervisor or technicians to carry out planned preventive maintenance, corrective maintenance and repairs as per instructed by Engineer
• Responsible of all technicians under Duty Engineer care
• Carry out planned and unplanned maintenance programs for the various systems such as (not limited to) the following:
• Air-conditioning & electrical, refrigeration, FLS equipment, building maintenance including furniture & fixtures, parts renewal & repairs, kitchen equipment, low voltage (LV), guest rooms, F&B outlets, front/back of the house, plumbing & drainage.
• Comply with established safety practices while performing repair or retrofit of all electrical, mechanical, plumbing, HVAC, water treatment, etc. Operate, maintain and repairs all hotel systems, devices, controls, equipment, etc.
• Comply with all established procedures, e.g. Work Orders, Out-of-Order Rooms, Emergencies, etc.
• Carry out preventive maintenance, repair or retrofit of electrical, mechanical plumbing, fire protection, and life safety systems.
• Records and analyses daily operating logs and utilities.
• Handles emergencies in repair works.
• Carry out improvement, maintenance and repair work on all building services and equipment according to the standards and requirements.
• Perform daily startup, shutdown and inspection of building services and equipment according to the standards and requirements.
• Maintain tools and equipment, and perform Engineering housekeeping work.
• Be fully familiar of the Emergency Procedures, Policies and Standard Operating Procedures as established by the Hotel.
• Attend all briefings, meetings and trainings as assigned by management.
• Perform other duties as directed by the management.
• Ability to prioritize tasks and follow specified procedures
• Ability to work well with minimal supervision
• Resolve problem without waiting for ‘Spoon feeding’ idea.
• Good physical condition, strength and well
• Enforce and check general housekeeping and tidiness of workplace and workspace
• Respond quickly in the event of an emergency, notify appropriate personnel and follow safety protocol
• Basic understanding of mechanical and electrical system
• Ability to conduct basic troubleshoot, test, repair and service equipment
• Fast, efficient and accurate when escalating problem up to Engineers
• Willingness to work overtime if necessary
• Able to make judgement and decision when Engineer is not around
• Assist Engineer to follow up outstanding issue passed down

Qualifications / Experience

• Trade Certificate or a minimum of 2 year of relevant hands-on experience in area of expertise
• Reading, writing and oral proficiency in English language
• Good communication and customer contact skills
• Service oriented with an eye for details
• Ability to work effectively and contribute in a team
• Self-motivated and energetic
• Able to lead the team in absence of supervisor
• Required to come down on site is urgent issue arise
• Control of technician’s OT and work roster
• Required simple computer knowledge etc, word and excel

About the Company

Our Client is an information technology service provider offering consulting, systems integration, maintenance and managed services to enterprise customers

Responsibilities

We are looking for a Network Engineer to design, deploy and maintain network infrastructure and solutions for clients in various industries.

• Design and implement secure networking solutions;
• Install, configure, and manage network devices;
• Troubleshoot escalated network issues and work towards effective resolution;
• Maintain detailed technical documentation for all network-related configurations and procedures;
• Monitor and enhance network performance, ensuring high levels of availability and stability;
• Drive improvements in scalability, capacity, security, and overall system efficiency;
• Support project deployment, ensuring successful implementation of network solutions.

Requirements

• Tertiary education in information technology or any relevant discipline;
• Certification in networking technologies would be an advantage;
• At least 3 years of experience in network infrastructure, ideally within a systems integration environment;
• Strong knowledge of wired and wireless network deployment and related technologies;
• Familiarity with routing and switching protocols and practices;
• Excellent organizational skills and the ability to prioritize tasks effectively.

Employment Details

• This is a 1-year renewable contract, convertible to permanent.

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

Job Description:

• Manage the project site by overseeing the day-to-day running of all matters related to the construction of the project as designated by the Project Manager.
• Plan, implement and monitor the work schedules according to the master and detailed work programmes.
• Assist in the planning and sequencing of the construction operations according to the Project Quality Plan.
• Liaise with client's representatives on site and with all subcontractors.
• Conduct inspections and checks on work performed by all subcontractors.
• Assist in the evaluation and resolution of any discrepancies and problems arising during construction and which has an effect on quality of the works.
• Ensure that updated drawings including shop drawings are used by for all construction.
• Co-ordinate the handing over of completed works to the client and completion of the necessary rectification works.
• Prepare project-related reports as required by the Project Manager or Construction Manager.

Job Requirement:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.
• PE Board Recognised Degree
• At least 5 Year(s) of working experience in the related field is required for this position.

Job Description & Requirements

The Corporate Quality Environmental Safety and Health Officer

• Inspect projects and provide advisory role to project team to eliminate potential hazards.

• Advise on risks arising from the workplace or processes at work, suggests measures to stop or tightly control all risks from happening.

• Preventing or lowering health and environmental risks, and improving quality of processes.

• Assisting the Company with ISO Certification involving ISO 9001, ISO 14001 & ISO 45001.

• Assisting projects with Consass Audit every 6 month.

• Conducting Internal Audit to projects to ensure compliance to ISO 9001, ISO 14001 & ISO 45001.

• Conducting Internal GGBS audit & maintaining Company’s GGBS certification

• Maintaining & revising IMS manual, Procedures & Safety, Health, Environment Management System Manual (SHEMS)

• Developing and revising Risk Assessment and Safe work procedures.

• Applying & maintaining BizSafe status of the Company

• Applying for WSH Awards from WSH Council

• Conduct QESH training to projects

• To attend to Client’s and Authority’s (MOM) inspection

• To organize programs related to Total WSH program by WSH Council

• To assist in providing safety related documents for Tender submission.

• Collating monthly safety performance statistics from all projects

• Conduct Monthly QESH meeting to all projects to share the safety performance of all the projects for continual improvement & to include evidences in the yearly MR Meeting.

Roles & Responsibilities

Job Scope:

• Submit plan and execute well-defined sales strategies to achieve targets;
• Develop and maintain good rapport with existing customers;
• Promptly and professionally attend to customers’ enquiries and requests and provide technical advise on both existing and new products or systems;
• Supports sales opportunities through presentations, calling and visiting customers and prospects, needs identification with active follow-ups;
• Ensuring smooth service operation efficiency for customers with sales and operations team
• Investigating and resolving customers’ issues with relevant departments when necessary
• Acquire new customer accounts;
• Assist in preparation of proposals and quotation administration;
• Contribute creative alternative ideas to help maximize sales opportunities;
• Participate in marketing, advertising, promotional and publicity activities in line with corporate and product strategies;
• Gather information on market demand, competition and latest product developments
• Conduct periodic sales forecasts;
• Prepare weekly sales/contact reports.

Requirements:

• Diploma/Degree in Mechanical/Civil Engineering other Engineering related
• 3 to 5 years of Experience
• Possess Class 3 driving license (with own transport preferred)
• Excellent communication, interpersonal and presentation skills;
• Possess an outgoing personality;
• Resourceful, proactive self-starter, positive attitude, performance oriented, able to work independently but also a team player;
• Must be able to read and write fluently in English & Mandarin
• Able to speak Mandarin p

Job Description:

• Perform preventive maintenance of production equipment.
• To report in writing for maintenance carry out.
• Provide support for network, security, server, UPS and mission critical systems.
• Perform other job responsibilities as and when assigned.

Requirements:

• Minimally 1-2 years of experience in supporting network, security, server, UPS and mission critical systems with a stringent SLA of 99.9%.
• Customer orientated with high level of service attitude.
• Good listening and analytical skills.
• Hardworking, outgoing and enthusiastic.
• Positive working attitude.
• Team player and also able to work independently with little supervision.
• Able to thrive in a dynamic environment.
• Able to understand the system and architecture diagrams.
• Able to understand the user operation environment.
• Willingness to pick up new technologies.
• Flexible to work in rotational shifts.

Interested candidates, do send your resume to [email protected]. ONLY shortlisted candidates will be notified through email for an interview.

Job Highlights

• Career Development Opportunities
• Duty Meals, Birthday Leave and Flexible benefits
• Complimentary Room Nights
• Discounted Room and Dining Rates

We are looking for Duty Engineer to join our Fun and Vibrant team.

As a Duty Engineer, we rely on you to

• Provide advice on the aspects of maintenance support and operational efficiency
• Supervises the team members and contractors’ for maintenance and repair of equipment
• Manage daily report of complains and maintenance request, to provide analyses report on regular basis
• Assist in implementing the Energy Conservation Programme
• Conduct on the job training to team members.
• Coordinates engineering support as required in hotel emergency procedures
• Adhoc duties as assigned.

We are looking for someone who:

• Diploma / Higher NITEC / NITEC in Electrical / Mechanical / Building Services / Facilities Technology
• Preferred working experience in hospitality industry
• Team player
• Good communication and writing skills

If you are the right person, what are you waiting for? Click the APPLY button now!

Responsibilities:

· Generate new / potential clients and manage business working relationships with existing clients

· Achieve KPIs, ensuring clients’ satisfaction through development of strategic plans and effective communication

· Develop, maintain understanding of company products and services

· Provide timely and accurate sales forecasts and reports

· Work closely with Operations Team to ensure clients’ satisfaction

· Attend trade shows, conferences and other events if necessary

Requirements:

· Diploma in Engineering Fields / relevant certifications

· Proven sales track record

· Excellent communication and interpersonal skills

Please include in the CV

· Last drawn

· Expected salary

· Notice period

Interested candidates, please submit your CV to [email protected]

EA License No: 06C4642

EA Reg No: R1110624

All applications will be treated in strictest confidence and only short-listed candidates will be notified

An exciting opportunity has arrived at The Garcha Group, Singapore’s luxury boutique hotel group with four hotels in Singapore, all of which are franchised under Marriott International—the world’s largest and most prestigious hotel company.

Marriott Hotels:

· Duxton Reserve Singapore, Autograph Collection

· Maxwell Reserve Singapore, Autograph Collection

· The Vagabond Club, a Tribute Portfolio Hotel

· The Serangoon Club, a Tribute Portfolio Hotel

Restaurants & Bars:

· Yellow Pot, Anouska's (Duxton Reserve)

· Shikar, Cultivate Cafe, Isabel Bar, Officers’ Mess Polo Bar (Maxwell Reserve)

· The Whiskey Library & Jazz Club, Sharab aur Kebab (The Vagabond Club)

· GupShup (The Serangoon House)

Garcha Group Benefits:

· As an associate of a Marriott hotel, you, your parents or parents-in-law, children, spouse/domestic partner, and siblings are eligible for discounts on F&B and room rates in 8,700+ hotels worldwide

· As an associate of a Marriott hotel, you have access to the “Global Learning + Development” tool which creates for you personalised learning experiences designed to help you thrive in your Marriott career journey

· Comprehensive health insurance plan with Raffles Insurance with the option to upgrade at subsidised corporate rates

· 2-night yearly staycation including all meals and beverage (incl. alcoholic) in any of the four Garcha Group hotels in Singapore

· 20% off food & beverage at Garcha Group restaurants and bars and all Marriott hotels

Job Description:

• Review all facilities with an aesthetic eye for detail;
• Be well-organized and able to be hands-on to trouble-shoot and fix issues related air conditioning (Daiken VRV), plumbing, humidity related issues, all M&E issues, service provider management, and optimize efficiency while reducing operating costs.
• "Can-do" attitude with resourcefulness and phenomenal efficiency can set you apart among our candidate pool.
• The goal is to ensure our accommodations is problem-free;
• Managing the upkeep of equipment and supplies to meet health and safety standards;
• Trouble-shoot, plan and coordinate all installations and repairs of (telecommunications, heat, electricity etc.) and refurbishments;
• Hands-on as well as manage the upkeep of buildings, equipment and supplies to meet health and safety standards;
• Inspect buildings’ structures to determine and implement the need for repairs;
• Obtain comparative quotations;
• Review utilities consumption and strive to minimize costs;
• Supervise foreign staff facilities staff (handy-men) and external contractors;
• Control activities like waste disposal, building security etc.;
• Handle insurance plans and service contracts;
• Keep financial and non-financial records;
• Maintain all trackers.
• Any other jobs requested by management.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyze and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Bachelor’s degree in computer science, Software Engineering, or a related field (Advanced degrees are a plus).
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis)
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.

• Study and analyse utilization of the network capacity resources, plan and implement changes to optimise and expand the network.
• Generate monthly reports via digital inventory to monitor network utilization, analyse trends and provide suggestions for improvement.
• Ensure all inventory assets, utilization, circuit routings are updated in the digital inventory in a timely manner.
• Streamlined process for inventory control, to achieve leaner and efficient operations.
• Document network design, configurations topology diagrams for ongoing processes, references and training purposes.
• Collaborate with various internal stakeholders such as AM, CS, PM for capacity request and new sales order.
• To work with external parties including bilaterial partners and vendors.
• Perform Ad-hoc restoration during outage, plan restoration using existing available capacity within specific SLA.
• Manage different projects, monitor timeline and resources to ensure project delivery within specific timelines.
• To remain on standby via call during assigned week to support Operations and respond to urgent request and outages for circuit restoration.
• Go on site for assigned activities to work with vendors for system planning and implementation and migration activities.
• Perform all other duties and responsibilities as assigned by supervisor.

Skills for Success:

• Nitec / Diploma in Engineering/Telecommunications or in relevant field.
• Goal-oriented with good analytical skills to solve problem. Candidate must be committed and driven to deliver projects assigned on time.
• Able to work independently with minimum supervision.
• Experience in telecom environment with focus on transport network, optical transmission and ethernet technologies.
• Good understanding of transport network architectures including OTN and Ethernet, DWDM.
• Good technical skill set with knowledge of L2 and L3 networking and strong understanding of TCP/IP, IP addressing, and routing protocols.
• Experience with networking hardware from major vendors.

Overall Job Purpose

To independently determine and draft the Requisitions for packages of mechanical components and / or equipment that are required in a project, assists in evaluating the technical aspects of bids and executing in order to deliver the packages on time and to ensure that the packages meet the technical requirements.

Core Responsibilities

• Understands the specifications and requirements in the area of mechanical components and equipment (such as compressors, heat exchangers, pressure vessels, pumps etc.) of the assigned project.
• Independently develops technical specifications and attachments that are part of Requisitions.
• Independently evaluates the technical and engineering aspects as well as issues related to components delivery of bids received from suppliers and gives assessment to the Senior Engineer.
• Generally, Senior Engineers are assigned complex packages and / or medium risk equipment
• Upon award to the successful tenderers, executes the orders for complex and / or medium risk packages by ensuring that documents (such as data sheets, drawings etc.) provided by the suppliers are complete, accurate and in order.
• An example is the specifications and information related to the interfacing between the mechanical component and other components.
• Being the focal point in respect of those packages handled, liaises and coordinates with various internal stakeholders, other discipline engineers, quality team, Engineering contractors and suppliers, ensuring that their needs are met timely and according to the specifications.
• Periodically visits suppliers, checks and tests the packages and their components to ensure that they function as per specifications. Occasionally, has to work with the suppliers to rectify the components making sure that they comply with the specifications and are ready on time
• Provides technical/engineering support and advice to Construction/Commissioning work at site, trouble shoots and follows up with suppliers to rectify the defects or problems.
• Resolves technical issues independently that may arise during the execution of packages handled using expert knowledge and technical know-how, and takes part in HAZOP workshop related to the assigned package and ensures recommendations are incorporated in the completed package with appropriate HAZOP close out.
• Is responsible for capturing lessons learned in his/her functional area, entering in MIMS, and closing out project related MIMS actions.

Qualifications & Experience

• Bachelor in Mechanical Engineering
• 12 years or more of relevant working experience in Mechanical engineering in oil and gas sector.
• Is aware of

1. Applicable industry standards, Company standards, specifications and procedures for his functional area;
2. Expert knowledge in the application of mechanical components such as pressure vessels, heat exchangers, pumps, compressors, Generators etc and market practices in the oil and gas sector.

Brunel International S.E.A Pte. Ltd

UEN No: 199603098R

EA License No: 16S8067

Shinu Alexander: R1657042

Our client is transforming the cleaning industry with advanced robotic solutions that tackle manpower challenges. Their innovative robots are already making a difference in 30 countries! As they continue to grow, they are seeking a Hardware Embedded Engineer (Senior) to join their team.

As a Hardware Embedded Engineer (Senior), you'll design and develop embedded hardware, optimize performance, ensure industry compliance, and mentor junior engineers.

Responsibilities:

• Design, document, and develop optimized hardware solutions.
• Conduct testing, bug fixing, and improve hardware performance.
• Perform PCB layout design and schematic capture.
• Create and maintain PCB library, schematics, and Bill of Materials (BOM).
• Prepare documentation and plans to support product certification and approval processes.
• Assist in troubleshooting product issues during production and in-service stages.
• Perform logical design tasks, including creating netlists and routing rules based on customer-provided information.
• Carry out PCB physical layout tasks such as parts placement, routing, and trace length adjustments.
• Apply electrical knowledge in high-speed, RF, and power PCB design to meet project requirements.
• Ensure designs are manufacturable by working with PCB suppliers and applying best practices to optimize cost and yield.
• Verify internal design tools and provide feedback to the development team.
• Develop design processes to reduce cycle time, minimize defects, and enhance product performance.
• Prepare detailed design documents and support training requirements.

Requirements:

• Minimum of 4 years of relevant PCB design experience.
• Experience with designs involving 6+ layer PCBs.
• Strong background in analog and mixed-signal PCB design, and experience working with PCB manufacturers to improve manufacturability.
• Proficient in logical net listing, schematic design, electrical rule creation, and signal/power integrity optimization.
• Solid knowledge of EMI/EMC handling and ESD precautions.
• Experience with blind, buried, and micro vias is a plus.
• Scripting skills in languages like Skill, Python, or others are advantageous.
• Experience in RF backplane, electrical package design/routing, and familiarity with robotics, automotive testing, or ATE industries is a plus.
• Strong attention to detail, teamwork skills, and good communication abilities.
• Proven ability to meet project deadlines consistently.

Interested candidates are invited to send in your Resume in MS Word Format stating your past work experience, reasons for each leave, past and expected remuneration.

We regret to inform that only shortlisted candidates will be notified.

By submitting an application to us, you will be deemed to have agreed for us to collect, use, and disclose your personal data which you have submitted to your prospective employers, for the purpose of job search, and/or other services which you have consented us to perform on your behalf.

Attn: Woo Gu Ming (R24123795)
Cultivar Asia Pte Ltd (MOM EA License: 19C8782)

Job Responsibilities:

• 2.5D/3DIC platform development.
• New unit module development and devices development.
• New process verification and qualification.
• New platform DSM setup
• Customer engagement and new product verification

Capability

• Solid semiconductor process integration and device characterization skills
• Semiconductor device physics and analysis skill.
• Experienced in 2.5D and 3DIC process development are plus.
• Skill on FMEA, control plan, DOE (design of experiment) and problem solving.
• Good communication, self-motived and avid learner

Qualification

• At least bachelor degree in microelectronics/electronics/electrical/physics/Materials engineering or other relevant fields.
• At least 7 years working experience in semiconductor R&D or related foundry experience of integration/process/device engineer.
• Working experience: 2.5D and 3DIC integration and device background are plus.
• Proficient English oral and writing skill.

The expansion of Ampcontrol has created a unique opportunity for a Communication Systems Engineer, based at our Singapore Operations.

You will execute the delivery of complete automation systems through design, software development, office testing, implementation, commissioning and modification.

As a Communication Systems Engineer, your solutions for automation and control system network design will help drive that advantage.

The following skills or experience would be advantageous:

• Experience in other PLC and SCADA platforms
• Extensive experience in the design and manufacture of electrical equipment and control systems
• Process control and automated systems knowledge
• Experience in working in Tunnelling industry

Your willingness to be hands-on and thrive in a specialised and changing environment will be complemented by the following:

• Diploma/Associate Diploma level qualifications in electrical engineering
• Schneider PLC and SCADA programming skills
• Competent in MS Office applications, with high level Word and Excel skills
• Demonstrated experience/understanding of electrical switchgear and control systems
• Demonstrated experience in resolving problems – electrical fault finding and PLC troubleshooting
• Control systems and network design

EMPLOYEE BENEFITS:

• Flexible work arrangements – remote working conditions will be considered.
• Paid parental leave
• Salary packaging
• Purchased leave
• Private Health
• Wellbeing programs and discounts
• Education assistance and personal career development

• Be part of advanced technologies and solutions for power solutions.
• Be exposed to cutting-edge technologies and solutions.

About Our Client

The company provides cutting-edge tools such as battery monitoring systems, power grid monitoring solutions, and maintenance technologies designed to enhance the reliability, efficiency, and performance of utility grids and backup power systems. Serving industries such as data centers, utilities, telecommunications, transportation, and healthcare, the company enables customers to implement condition-based maintenance, ensure regulatory compliance, and extend asset lifespans.

Job Description

Key Responsibilities

• Provide technical service and support for products.
• Perform testing and commissioning, including site acceptance tests in collaboration with consultants and end-users.
• Diagnose and troubleshoot issues in customer installations and products.
• Maintain and execute service agreements with customers, ensuring adherence to contractual service levels.
• Provide guidance and expertise during new product installations and represent the company at on-site installation meetings to resolve field issues promptly.
• Conduct technical seminars for customers and channel partners, and represent the company at trade shows and special events.
• Offer feedback to Product Management regarding market conditions, product enhancements, and necessary upgrades.
• Prepare and submit weekly reports highlighting site-specific issues, customer concerns, or product performance challenges.
• Assist customers during the initial design phase and ensure proper application of Grid Solutions products.
• Deliver specialized training and operational documentation to customers to support their needs.
• Provide on-call support for customer installations and maintenance, including after-hours and weekend support as required.
• Undertake overseas travel within the Asia region for installations and maintenance projects.
• Perform other related duties as assigned.

The Successful Applicant

Requirements

• Bachelor's Degree in Electrical Engineering or a related field, or a Diploma in Electrical Engineering with relevant experience.
• At least 3 years of technical, sales, or related experience in Grid systems or the electrical industry.
• In-depth understanding of critical asset monitoring systems, including Battery Systems, UPS, and Battery Monitoring Systems, with experience in data center battery management and maintenance preferred.
• Excellent interpersonal, presentation, and communication skills to build strong relationships with customers, consultants, and end-users.
• Ability to work independently with exceptional organizational and problem-solving skills.
• Self-motivated, energetic personality with a customer-oriented approach.
• Proven ability to interpret technical instructions in mathematical or diagram form and resolve issues involving multiple variables.
• Demonstrated ability to plan and prioritize tasks effectively, including occasional support for team planning.
• Previous sales or service experience is an advantage.
• Maintains confidentiality and exercises discretion with sensitive business information.

What's on Offer

The client offers candidates an exciting opportunity to be part of a globally recognized leader in critical power grid technologies. Joining the team means working with cutting-edge solutions that drive innovation in power reliability and asset management for diverse industries like data centers, utilities, and telecommunications. Employees benefit from a dynamic, collaborative work environment with opportunities for professional growth, regional exposure across the Asia Pacific and Middle East, and hands-on experience with advanced technologies. The company provides comprehensive training, a competitive compensation package, and opportunities to represent the brand at high-profile events, trade shows, and seminars. For individuals passionate about technical excellence and customer satisfaction, the client offers a rewarding career path with significant impact on the future of energy and power systems.

Contact

Timothy Huang (Lic No: R1980928/ EA no: 18S9099)

Quote job ref

JN-012025-6632825

Phone number

+65 6416 9863

Michael Page International Pte Ltd | Registration No. 199804751N

Job Responsibilities

• Engage in project engineering of ACMV Systems.
• Manage and lead co-ordination of assigned projects/site & facilities;
• Liaise with clients and consultants on projects;
• Co-ordinate sub-contract works;
• Assist in site administration;
• Cost management of projects to be within budget;
• Preliminary design and budgeting for Design and Build tenders;
• Any other tasks assigned by the management.

Job Requirements

• Minimum 3 years of experience in ACMV works.
• Minimum Diploma in Mechanical Engineering
• Knowledge in AutoCAD drawings
• Possess coordination, problem-solving, leadership skills

Job Responsibilities

• Responsible for the design and development of CMOS and SOI analog Integrated circuit designs for mobile handset applications.
• The candidate will work within a group of analog/RF IC design experts and be assigned to a multi-chip module product team with typically 3 to 5 design engineers.
• The candidate will interface with design management and module design teams to create the detailed specification, report design progress, and to collect, track, and resolve any performance and circuit design issues.

Job Requirements

• Possess a BS degree (MS is preferred) and 2 years of experience in analog IC design.
• Demonstrate experience in analog or RF IC design at the chip level.
• Have understanding of the basic device physics with the ability to develop and use advanced linear and non linear models or simulation techniques
• Able to translate between the model, simulation, physical implementation, and the measured performance of a device.
• This job also requires experience in simulation tools, analog circuit test characterization techniques and equipment.
• Proven track record in using Cadence or similar analog IC design tools and hands-on experience with lab measurements and characterization equipment.

Our Company (Tigris) is a Singapore-based project development company, focusing on Environmental and Sustainability Projects, such as water/wastewater/waste treatment, energy optimization and efficiency systems, distributed renewable energy, etc.

Tigris is active in India, the Philippines, Indonesia and Singapore. Tigris works with environmental engineering firms in these countries to develop, finance, operate and maintain Environmental and Sustainability solutions to customers, including commercial, industrial and residential end-users.

www.tigris.com.sg

Job Description:

Primary Role: Responsible for techno-engineering work during the project cycle, from evaluation, implementation through to operations / maintenance, including:

• Pre-investment technical due diligence, such as review of engineering and process design, comparing capex/opex estimates to industry benchmarks, technical capabilities of EPC contractors, etc
• Supervision during implementation, such as:
  • Verify whether project-related EPC and investment agreements are being met.
  • Physical status of the work implemented on site.
  • Judge and report the quantum of finance contributed and used for the project.
  • Estimated expenditure for the project over observed progress.
  • Review and comment of Statutory Approvals and Clearances.
  • To check whether physical progress is in line with project implementation schedule and planned project timelines.
  • Review the drawdown schedule for the planned project activity.
• Oversee operations and maintenance of project investments, to ensure O&M contractors are performing their roles, and projects are being managed in line with budgets and contracts

Secondary Role: Support Business Development / Commercial / Investment work, i.e. identify and contact potential environmental projects which Tigris can invest in, including in India, Philippines, Indonesia, Singapore, and over time, to work with local partner companies on project development and business strategy.

Skills

Candidates should have the following:

• 5 to 10+ years of relevant work experience gained (e.g. in a Water, Engineering/Construction, or Consulting Company)
• Proven ability for critical / logical thinking and problem solving
• Strong co-ordinator & team player
• Self-motivated, well-organized and can-do attitude
• Strong communication skills. Ability to work very independently in a small team
• Evidence of high performance standards in previous position(s)

On job training to be provided

Responsibilities:

- Responsible for daily basis service work and handling new installation projects and testing commissions for air-cooled and water-cooled chiller.

- Routine servicing of Commercial Chillers (Air-cooled & Water-cooled chillers) onsite.

- Routine duties includes maintenance, troubleshooting and repair to commercial chillers, AHU, FCU, VRV CRAC, VRV Systems, including tear down and rebuild (overhauling).

- Able to read specifications and drawings by contractors.

- Inspecting and testing systems to verify system compliance with plans and specifications and to detect/locate malfunctions.

- Organise and keep up with records and report all faults, deficiencies and other unusual occurrences, as well as the time and materials expended on work orders.

- Responsible for adjusting system controls to settings recommended by manufacturer to balance systems handling for all types of refrigerant.

Requirements:

- Diploma/Degree in Mechanical Engineering

- Minimum 2 years of technical experience with knowledge in air-conditioning, Chiller, ACMV or HVAC systems

- Resourceful with good analytical and interpersonal skills

- Strong communication skills

- Good team player with ability to lead and multi-task

- Possess Class 3 driving license will be an added advantage

Mon to Fri - 8am to 5.30pm