• Supervise testing and commissioning of electrical equipment on-site and manage the review and submission of site acceptance test reports.
• Review and interpret Single Line Diagrams and Electrical Schematic Drawings.
• Support electrical equipment installation inspections to ensure compliance with standards.
• Participate in site activities and meetings with clients and contractors.

Requirements:

• Diploma in Electrical Engineering.
• At least 3 years of site installation, testing, commissioning and maintenance testing experience in Low/Medium Voltage Electrical Equipment.
• Possess initiative and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Analyse network traffic patterns across identified routes.
• Collect specific measurements across identified routes for analysis.
• Conduct a network infrastructure analysis.
• Conduct threat assessment matrix on network.
• Configure Authentication, Authorisation and Accounting (AAA) services to support remote access protocols based on security requirements.
• Configure a network addressing system.
• Configure hosts and workstations to use IP addresses either manually or through automatic allocation of addresses.
• Configure network devices to provide secure failover and redundancy.
• Debug networking issues to maintain wireless connection.
• Escalate network performance issues to relevant personnel.
• Evaluate user requirements and recommend network protocol services.
• Identify the network components that are required to be installed.
• Install and configure access point to provide wireless access to network.
• Install and configure the components.
• Install firewall appliance for attack guards and intrusion detection.
• Monitor wireless network performance using diagnostic tools.
• Operate network monitoring tools to monitor network performance against thresholds and Quality of Service (QoS).
• Plan control methods for the network for user access management.
• Review network traffic problems with relevant parties for resolution.
• Test the overall network to verify that it meets the agreed requirements.

Job Requirements:

• Diploma or University Degree holder
• Cisco Certificate
• Knowledge in routing, switching, SD-WAN, and vendor technologies (Cisco, Fortinet, etc.)
• Knowledge of Server Architecture such as SANs, Citrix, AD;
• Knowledge in Microsoft server applications, Microsoft Azure Platform as a Service and Microsoft Azure Infrastructure as a Service
• Any relevant professional qualifications are considered an advantage

Job Description & Requirements

Role: Desktop Engineer - End User Computing (EUC)

Work Location: Woodlands & Yishun

Job Description:

Shall provide daily on-site DESKTOP management and support services (“DESKTOP Support Services”) for end-users’ End UserComputing Devices (DESKTOP) which are used in the Customer’s environment with the Customer’s approval. The general scope of Desktop Support Services shall minimally include:

(a) Image build management;

(b) Administration and configuration;

(c) End-user account management;

(d) End-user device hardening and lockdown;

(e) Trouble-shooting and problem resolution; and

(f) End-user briefings & awareness service.

Shall minimally support the following types of DESKTOP:

(a) Desktops;

(b) Notebooks;

(c) Mobile Devices (e.g. iPad, iPhone or equivalent);

(d) Video Conferencing Devices;

(e) IP Telephones;

(f) Printers, including multi-function devices (i.e. printers, scanners and fax devices); and

(g) Other peripherals (e.g. external hard drives, mouse, smart-card readers, monitors, docking stations).

Shall minimally support the following operating systems:

· Windows 7 and later versions of Windows;

· Apple iOS 9.x or later versions; and

· Android OS 5.x or later versions.

Minimum Requirement:

The Level 1 Desktop Support Engineer meet the following requirements:

(a) Minimum one (1) year of DESKTOP Support, ICT End User Computing or Service Desk Agent experience;

(b) Ability to perform the daily DESKTOP Support operations with minimum supervision;

(c) Possess technical skills in supporting existing and new computing devices such as desktops, notebooks and mobile devices;

(d) Possess knowledge in IT networking and LAN to troubleshoot computer problems; and

(e) Possess at least one (1) of the following certifications:

· Microsoft Certified Solution Associate (MCSA) Win7/Win8 or equivalent;

· (ii) Microsoft Certified Technology Specialist (MCTS) in any discipline or equivalent; or

· (iii) CompTIA A+ 220-801/ 220-802, CompTIA PDI+ or equivalent.

A quantity surveyor may work for either the client, the contractor or sub-con, working in an office or on site. They are involved in a project from the start, preparing estimates and costs of the work.

When the project is in progress, quantity surveyors keep track of any variations to the contract that may affect costs and create reports to show profitability.

Aside from Quantity Surveyor, he or she will also act as project engineer wherein will take charge of the suprvising the project, adhere to construction procedures, coordinate all work schedule with the main con and liase with project manager and archi coordinator.

He or She should monitor and ensure that the work progress is within project schedules and manage the project independently as well as lead and motivate team.

Estimation of quantities, preparing BOQ, BBS as per drawing.

• Coordinating with Design & Construction team.

• Review engineering drawing and specifications and ensure the correctness of transfer of drawing details to ground, Checking all centering and reinforcement works.

• Physical measurement of quantities and tracking the productivity.

• Ensuring timely resource availability.

• Undertaking cost analysis for repair and alteration done by customer in project work.

• Evaluating completed work and arranging payments

• Ensure quality of structure, works as per drawing and specifications & ensure no rework

• Analyzing outcomes and writing detailed progress reports.

• Preparation of Daily, Weekly and Monthly reports and submitting it to the Management

Job Description & Requirements:

As a Frontend Engineer, you will be responsible for architecting and developing efficient, reusable, and visually appealing frontend systems for a trading application powered by AI models and LLMs. You'll work closely with cross-functional teams, including backend engineers, AI engineers, product managers, UI/UX designers, and the product design team to deliver a responsive, engaging user experience across web and mobile platforms. Your expertise will ensure a seamless blend of aesthetic and functionality.

Key Responsibilities:

• Architect, design, and develop efficient and reusable frontend systems (Web/Mobile)
• Collaborate with backend engineers, AI engineers, UI/UX designers, product managers, and other stakeholders to build comprehensive, architecturally sound, and visually appealing frontend solutions
• Optimize code to improve scalability, reliability, security, and performance of web and mobile applications
• Design interactive components, especially for chat-based and generative UI, to create dynamic LLM-powered user experiences
• Write comprehensive tests for all developed features to maintain software quality and reliability
• Documentation of design and architecture.

Qualification & Skills:

• Minimum 6 years of professional experience as a Frontend Engineer
• Expert in HTML5 / CSS3 / ECMAScript 6 + / TypeScript. Strong preference for candidates experienced with Tailwind CSS
• Proficient in modern frontend frameworks, including React and Vue, and/or React Native for mobile
• Skilled in state management tools such as Redux, Pinia
• Experience with API design principles, RESTful API integration and familiar with React Query
• Strong understanding of client-side performance, optimization.
• Deep knowledge of scalability, reliability, and security considerations in modern web development.
• Familiarity with LLM application development and generative UI/interactive components, particularly for chat-based applications
• Excellent collaboration and communication skills to work effectively across teams

Quantitative Trading Engineer / Quantitative Researcher

Working day: Monday to Friday, 9am to 6.30pm

Working location: Raffles Place

Salary: Discuss during interview

Responsibilities

Strategy Development:

• Use AI technologies such as machine learning and deep learning to intelligently optimize investment strategies and improve the performance of strategies in actual transactions.
• Extract predictive signals from financial data through both traditional statistical analysis methods and cutting-edge machine learning techniques.
• Formulate and apply mathematical modeling techniques to enhance existing trading strategies and perform innovative new research with the goal of identifying and capturing trading opportunities.

Data Analysis：

• Collect and analyze large financial datasets (market data, news, social media, etc.).
• Work with large data sets to predict and test statistical market patterns, combining knowledge of systems, mathematical techniques, and trading to identify the best places to improve the trading system.
• Build and optimize feature engineering pipelines to improve model prediction accuracy.

Financial Modeling:

• Construct, back-test, maintain, and improve financial models to support trading activities.
• Conceptualize valuation strategies, develop, and continuously improve upon mathematical models and help translate algorithms into code
• Conduct research and statistical analysis to build and refine monetization systems for trading signals
• Optimize the order execution and risk management of our trading system
• Create robust solutions to problems presented in the trading environment
• Build regression, classification, reinforcement learning and other models for market forecasting and trading decisions.
• Tuning the model's hyperparameters to improve model performance and stability.

Strategy backtesting and real-time testing:

• Backtest historical data to evaluate the strategy's yield, volatility, drawdown and other indicators.
• Deploy the strategy to the real-time environment, track performance and continuously optimize.

Requirements

• Master’s degree or above in Statistics, Mathematics, Applied Mathematics, Computer Science, Financial Engineering or equivalent.
• At least 2 years of experience in quantitative trading and machine learning modeling.
• Proficient in programming languages ​​such as Python, C++, Java, etc.
• Familiar with common machine learning frameworks such as TensorFlow, PyTorch, Scikit-learn.
• Familiar with quantitative trading systems, data flows and algorithms.
• Deep understand the structure of financial markets and be familiar with markets such as virtual currencies, stocks, futures, and foreign exchange.
• Experience in large-scale data processing, proficient in using SQL, NoSQL, Hadoop and other tools.

Bonus Skills

• Experience in developing high-frequency trading strategies will be an advantage.
• Participated in AI competitions (such as Kaggle) or published papers in top conferences (such as NeurIPS, ICML) will be an advantage.
• Familiar with cutting-edge AI technologies such as reinforcement learning, and generative adversarial networks (GANs) will be an advantage.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Identify customer needs and recommend product solutions.
• Responsible for the technical support for both presales and post sales.

Requirements:

• Degree in Electronics/Electrical Engineering
• At least 2 years of sales experience in artificial intelligence/physical security/CCTV or smart workspace solution.
• Knowledge of TCP/IP, Network Structure, Firewall, LAN and VLAN

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Instrumentation of measurement and detection equipment for military and homeland security.
• Oversee post-sales delivery of equipment, conduct scheduled maintenance, and conduct diagnostic analyses for troubleshooting and repair tasks.

Requirements:

• Higher Nitec in Electrical & Electronics Engineering or equivalent.
• At least 2 years of working experience

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Our client is one of the leading medical manufacturers. Due to business needs, they are now recruiting a Quality Assurance Engineer to be part of their QA Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Quality Assurance Engineer:

• Maintain and update Quality Management System (QMS) procedures to ensure compliance.
• Verify process documentation, including work instructions, quality inspection plans, data sheets, and inspection reports.
• Lead and guide quality control inspectors to uphold compliance standards.
• Oversee in-process and final quality inspections, collaborating with internal teams to address manufacturing quality issues.
• Resolve process non-conformance issues promptly and effectively.
• Address customer complaints through containment actions, root cause analysis, and implementation of corrective and preventive measures.
• Manage documentation control systems and facilitate internal and external audits.
• Ensure timely completion of customer environmental surveys and related requests.
• Provide support for QA/QC activities, projects, and other ad hoc duties as needed.

Requirements:

• Diploma in related field
• Relevant experience in Medical Manufacturing Industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for Software Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area

Job Responsibilities:

• Design solutions that meet functional requirements.
• Develop end-to-end specifications for solution components.
• Perform testing and implementation of the solution.
• Participate in impact analysis of encountered issues.
• Contribute to continuous improvement of software development best practices in the areas of coding tools, languages and APIs, as well as software design and development processes.

Participate in UX activities such as:

• Conduct user research/interviews
• Develop user stories, storyboards to articulate current and future concepts
• Create wireframes, detailed visual mock ups and interactive prototypes
• Create style guides and digital assets for production

Requirements:

• At least 2 – 3 years’ Software Engineer experience, with strong expertise in at least of the following languages: Java, JavaScript, Python, C#, .Net.
• Good understanding of software development lifecycle processes
• Proficiency in Web Technologies such as HTML, CSS
• Diploma or Degree in any IT discipline or equivalent

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

Job Responsibilities:

1. Assisting and supporting technical sales team in terms of scope of supplies and costing with respect to electrical, automation requirements during the prospecting stage for water/wastewater related systems and projects.
2. Liaising and communicating with agents/distributors/OEM partners/end-user customers on technical details and specifications of parts and components where EICA works are concerned.
3. Design and producing electrical, control panel drawings (AutoCAD or Eplan), BOM list generation and hardware component selection.
4. Developing PLC programming & HMI project (Siemens /Allen Bradley etc) for all process and functional controls of water/wastewater related systems and instrument.
5. Liaising, negotiating, and managing sub-suppliers/sub-contractors in Singapore and in the region with respect to procurements of all wiring and cabling works, fabrication and assembly of control panels for systems as well as for in-situ installation of water/wastewater related systems or projects.
6. Determining and monitoring procurement and production progress and schedules where cabling and wiring works, control panels’ PLC works and supplies are concerned.
7. On site electrical installation supervision, electrical panel testing, instrumentation configuration, loop test and automation commissioning works.
8. Compiling and handing over operation and maintenance (O&M) manuals (electrical and PLC portions etc) to our agents/distributors and end-user customers.

Requirements:

• Diploma / Degree in Electrical Engineering or Computer Science.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Minimum 5 to 8 years of working experience in Water Industry or engineering projects would be advantageous.
• Knowledge of PLC programming (Siemens /Allen Bradley etc)
• Willingness to travel locally or to regional countries occasionally for site installation, trouble-shooting or testing and commissioning duties at clients' project sites
• Able to work independently and a good team player.
• Senior position will be considered for candidates with more experience.
• Candidate who are able to start work within short notice or immediately would be advantageous.

Oversight day to day site progress on mechanical and electrical installations in fire protection system

Materials take off for mechanical and electrical installation in fire protection system and place order to managament

Coordination between multiple trade on site installation

Liaise with main contractor for project scheduling

Update shop drawing in cad file for as built creation and update main contractor

Represent company on site progress meeting

Respond emergency calls from maintenance sites and activate manpower

Responsibilities:

• Agree to detailed programmes of work - time chart and representation on site plans
• Check that all necessary drawings and instructions have been given to contractors and authorisations obtained, in accordance with the agreed programme
• Check that materials are ordered in good time and permits OK.
• Check that all construction work is carried out in a safe manner, and that the site is kept secure
• See that requirements of specifications in regard to materials and workmanship are complied with by contractors. This includes sample tests of material and workmanship.
• Watch for faulty workmanship and material incorporated in the works and to issue instructions for rectifications
• Check line and level and layout of structure during erection and that intentions of contract drawings are adhered to
• Check structural slab beam and column sizes and reinforcements placed and that intent of design details are followed
• Keep a record of all measurements and tests and to bring plans into conformity with the work actually executed
• Issue such further instructions and clarifications of details as and when required; and to inform Architect for issuance of Architect's Instruction or Architect's clarification.

Requirements:

• At least 4 to 6 years or more relevant experience
• A recognised university degree in Civil Engineering

Job Description:

• Liaise with sub-contractors on day-to-day site operations.
• Proactively manage any changes in project scope.
• Identify and resolve any site issues with other trades.
• Ensure the project meets clients' quality standards.
• Able to interact with all levels of stakeholders.
• Attend regular consultant meeting

Job Requirements:

• Recognized Washington Accord Univeristy of Degree in Civil Engineering.
• Min 5 years of local working experience.
• Good computer literacy.
• Self-motivated and able to work independently.

Company Overview:

Quanta Integration and Solution Pte Ltd is a project based company working closed to with it’s partners who provided leading vehicle safety solution and telematics that specializes in providing cutting-edge technologies to enhance vehicle safety, efficiency, and connectivity. With a focus on innovation and customer satisfaction, Quanta Integration and Solutions is committed to delivering top-notch solutions to its clients.

Position Overview:

As an Assistant Installation and Maintenance Engineer, you will support the senior engineers in installing, maintaining, and troubleshooting vehicle safety and telematics systems. This role will provide you with hands-on experience in both installation and maintenance tasks, ensuring that all systems function effectively to meet customer needs.

Responsibilities:

• Installation Support: Assist in installing and configuring vehicle safety and telematics equipment under the supervision of senior engineers/project managers and etc.
• Maintenance & Troubleshooting: Support routine maintenance tasks and assist in resolving hardware and electronics issues to ensure systems function effectively.
• Customer Support: Provide on-site technical support, responding to customer inquiries and helping resolve system issues.
• Safety & Compliance: Follow safety standards and industry regulations during installations and maintenance activities.
• Equipment Management: Help prepare and organize tools, equipment, and resources for technical tasks.
• Quality Checks: Assist in quality control procedures, ensuring that installed systems meet performance and safety standards.
• Reporting: Keep records of installation, maintenance, and troubleshooting activities/update immediate supervisors and project supervisors accordingly.

Qualifications:

• Degree/Diploma or equivalent from Polytechnics/ Universities in Electronics, Electrical Engineering, or a related field.
• Basic knowledge of vehicle safety solutions, telematics, and electronics systems.
• Hands-on experience in installing and troubleshooting electronics or automotive equipment is a plus.
• Ability to read and understand technical diagrams and manuals.
• Strong problem-solving skills and attention to detail.
• Good communication and teamwork abilities.

Benefits:

• Competitive salary and benefits package.
• Opportunities for professional growth and development.
• Collaborative and dynamic work environment.
• Exposure to innovative technologies in the automotive and telematics sectors.

Brief Description & Role

This position is responsible for testing, troubleshooting, and repairing RF components and systems. You will work closely with cross functional teams to ensure the quality and performance of RF equipment, ensuring that all devices meet the required specifications and standards.

Responsibilities

1. Work with business development, Engineering, system test and external customers to gather information and develop RF Test plans, specifications for product under test.
2. Perform RF testing using test equipment such as spectrum analyzer, noise figure meter, power meter, network analyzers, and signal generators.
3. Assembling/debugging the RF test system and device under test.
4. Hands on troubleshooting and repair of RF product till component level using RF and digital measurement tools & equipment.
5. Analyze test data and provide reports on yield.
6. Document test procedures, results, and any issues encountered during testing and debugging.
7. Assist in the development of new RF testing methodologies and best practices.
8. Do simple antenna parametric radiation measurement

Requirements

· Diploma /Bachelor in Electronics or Communication Engineering, or equivalence

· Preferably with at least 2 years of working experience in a product-based electronics manufacturing environment / product development.

Skills, Experiences & Knowledge

· Experience in automating test and measurements using bench test equipment.

· Knowledge of programming software in C, C#, Python or LabView.

· Experience with PCB design software

· Experience in antenna parameter measurement

· Preferably with soldering experience

· Excellent communication and documentation skills.

JOB RESPONSIBILITIES

· Design, create, revise and maintain structural drawings related to Heavy Lifting using AutoCAD

JOB DUTIES

· Strong in concept design, architectural details, working drawings and construction practices as per site condition

· Liaise with Project Managers for drawings and submission approval on machinery

· To produce the design drawings within the time frame given with minimum supervision

· Provide technical support on site to engineering personnel

· Support Sales and Operations Department on technical support

· Assist in designing of name cards and company yearly calendar by using Adobe Photoshop

· Any other ad-hoc duties as per instructed

SKILLS AND QUALIFICATIONS

· Diploma In Civil Engineering or related fields

· Min 2 years relevant experience in Singapore or overseas is an added advantage.

· Creative and well versed in AutoCad 2D & 3D, Adobe PhotoShop, Adobe Illustrator, Google Sketch/SketchUp and Movie Maker

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for a Manufacturing and Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Offer continuous technical support to contract manufacturers, resolving electronic engineering issues encountered during production.
• Work closely with manufacturers to establish and uphold rigorous quality control standards, ensuring reliable and consistent product performance.
• Analyze manufacturing workflows to identify and implement process improvements that boost efficiency and productivity.
• Address and resolve electronic engineering challenges to prevent production delays and minimize defects.
• Collaborate with design and development teams to implement design enhancements that improve product quality and streamline manufacturability.
• Coordinate investment audits with cross-functional teams, conduct regular physical asset inspections, and assist with annual inventory checks as needed.
• Any ad-hoc duty as given

Requirement

• Min Bachelor's degree in Electronic Engineer or a related field
• Min 4 years in EMS - Electronic device assembly
• Good understanding in overall supply chain, manufacturing technology, process set-up, process validation and SOP support
• Knowledge and experience in manufacturing, planning, quality, SAP, PLM
• Knowledge and experience in wearable electrical device's assembling
• Comfortable to travel overseas often

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Provide presales support by solving technical business solutions for the client.
• Responsible for product demonstration, proposal writing, creating compliance table, training and product enablement.
• Develop working proficiency and obtain certifications on assigned products and technologies.
• Conduct hands-on POC independently and present vendor’s solution to partners and end-users.

Requirements:

• Diploma in Computer Studies or equivalent
• At least 2 years of presales experience in IT network and Cybersecurity domain.
• Good knowledge of security and networking infrastructure environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Design and build data pipelines infrastructure to collect, process and store data from various sources.
• Develop data assets platform to provide a centralized repository for managing and accessing data assets.
• Implement automated SQL queries based on user-defined criteria or business requirements.
• Use techniques like query templates, metadata-driven generation, or machine learning algorithms to generate SQL queries.
• Create new IPs in Singapore in area of expertise.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development.

Requirements:

• Degree / Masters / PhD in Computer Science, Data Science, Statistics Applied Sciences or related field.
• Proficiency in Python, SQL, Java or Scala programming languages.
• Understand data warehousing concepts, ETL (Extract, Transform, Load) processes and tools like Informatica, Talend, or Airflow.
• Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra).
• Familiar with Apache Airflow, Kubernetes or Ansible for automating data pipelines and infrastructure.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

• 
  
• To be involved in the planning and designing of civil and structural engineering works
• To prepare the design and technical specifications for tenders; as well as tender documents for the bidding of civil and structural engineering projects
• To supervise in the civil and structural works
• To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients
• Any ad-hoc duties as per assigned

1) At least two years working experience

2) Able to use engineering software Staad pro, SAFE, Plaxis

3) Able to work independently under the guidance of senior / principle engineer

• Overall 8 years of strong automation and functional testing experience in financial services.
• Experience on working in Client and Market side connectivity for trading applications.
• Work experience of Fix and Swift.
• Sound working experience on complete trading life cycle.
• Full STLC testing experience including experience on Test Management Tools and Defect Trackers Passion for everything about testing
• Excellent database and SQL skills, ability to test through middleware using SoapUIREST Services.
• Experience working on banking Wealth Management suite of application

Job Responsibilities:

· Database Management: Install, configure, and upgrade database management systems and related products.

· Performance Monitoring: Monitor database performance, implement changes, and apply new patches and versions when required.

· Backup and Recovery: Develop, manage, and test backup and recovery plans to ensure data integrity and availability.

· Optimization: Optimize and tune databases for performance and efficiency.

· Troubleshooting: Diagnose and resolve database access and performance issues.

· Collaboration: Work closely with developers and other IT staff to support database needs and requirements.

· Software Development: Design, develop, test, and deploy high-quality software applications and systems.

· Security: Implement and manage security measures to safeguard the database from unauthorized access.

· Design and Development: Develop and implement data models, ETL processes, and data pipelines to support data warehousing and analytics needs.

· Message Middleware: Work with message middleware technologies (e.g., Apache Kafka, RocketMQ) to facilitate data integration and real-time data processing.

Job requirement:

· Education: Bachelor's degree in Computer Science, Information Technology, or a related field. Advanced degree or certifications (e.g., MySQL Certified Professional) preferred.

· Experience: 8+ years of experience as a Database Administrator.

· Proficiency with database management systems (e.g., Oracle, SQL Server, MySQL, PostgreSQL).

· Experience with database backup, recovery, performance tuning, and high availability.

· Knowledge of database design and data modeling.

· Familiarity with cloud-based databases and services (e.g., AWS RDS, Aliyun RDS ,Tencent RDS) is a plus.

· Experience with scripting and automation tools (e.g.,, Python, Go,Bash).