GOODWOOD PARK HOTEL SINGAPORE

One of Singapore’s most established Heritage Hotel and strategically located at Scotts Road, the Goodwood Park Hotel has celebrated its timeless elegance, legendary hospitality, and tradition of excellence. We are committed to building a high-performing team that is thoroughly engaged in achieving service excellence to exceed our guests' expectations.

To continue the legacy of Goodwood Park, we are looking for dynamic and committed candidates to join our Engineer Department.

Reporting to the Director of Engineering, your job responsibilities include, but not limited to:-

Responsibilities

• Assists the Director of Engineering to prepare annual budget for departmental expenses including manpower requirements.
• Assists the Director of Engineering to oversee the efficient operation of the department. Prioritise, plan, schedule, assign and supervise all staff of maintenance department.
• Co-ordinates with architects, M&E consultants and various government departments for projects approval, executions and licences etc, as directed by the Director of Engineering.
• Plan and direct the preventive and corrective maintenance tasks, work orders and special projects ensuring timely and accurate completion.
• Establishes and co-ordinates the annual in-house maintenance programme.
• Oversee mechanical and electrical testing or commissioning as and when necessary.
• Oversee the maintenance of the physical appearance and operational efficiency of the hotel, including physical, mechanical, electrical, plumbing etc. Focusing on operations, guestsand owner’s satisfaction.
• Initiates sustainability/ energy conservation programs for the hotel.
• Assists and co-ordinates with other departments regarding maintenance and administration matters, including their budget plan for new/replacement of equipment, renovation, etc.
• Coach and guide staff and contractors to ensure that they are familiar and comply with the hotel standards in performing maintenance activities.
• Train staff on proper use and periodic maintenance of all equipment.
• Ensure maintenance staff are wearing proper uniform with name tag and upholds hotel’s grooming and hygiene standards.
• Ensure hotel and work areas are maintained to standard and that all safety equipment. and conditions are to code.
• Ensure proper records are kept relating to the hotel including repair and service records.
• Develop, implement, and direct all emergency programs.
• Prepare reports as required by the Director of Engineering and Management.

Requirements

• A minimum of 5 years of experience in hotel engineering operations, with at least 2-3 years in a in similar capacity.
• At least a Polytechnic Diploma in Electrical, Mechanical or Building Services or equivalent.
• Proficient in the use of Microsoft Office.
• Advanced knowledge of building management/engineering.
• Good communication (verbal and written) and good leadership skills.
• Ability to multi-task and work in a fast-paced environment.

Please be informed that only shortlisted candidates will be notified.

For more information, visit www.goodwoodparkhotel.com.

Responsibilities:

• Assist the project manager with on and off site meeting pertaining to the technical issues
• Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project
• Proven problem solving and achievements work progress according to the work schedule
• Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

• Candidate must at least a Bachelor’s Degree, Post Graduate Diploma in Civil Engineering or equivalent
• Min 2 year relevant experience in the related field for this position
• Be able to work independently with minimum guidance
• Good team player, keen desire to learn, contribute, advance and progress with the company.

• MNC
• Shift Work
• 1 year contract, Renewable

Job Scope:

• Responsible for Equipment Uptime, Productivity and CIP.
• In-charge of PM planning, Equipment Maintenance, and Parts Management.
• Co-work with Engineer to resolve equipment/line issues.
• To improve and enhance machine performance and upgrade machine capability
• Able to work in a cleanroom environment.
• Other ad-hoc duties as assigned

Requirements:

• Work Location: Pasir Ris
• Basic Salary: Up to S$3000
• Able to work in Antistatic Suit
• Able to start work immediate or on short notice

How to apply:

Interested applicants kindly state your Expected salary, Last drawn salary and Starting date.

We regret to inform that only shortlisted candidates will be notified.

EA Personnel: Joanna Leow Jiayi
EA Reg ID: R1871786
EA Licence No.:19C9603

Job Description

As a Design Engineer, you will report to and assisting Design Manager.

Key Responsibilities

1. Understand the project requirements and specifications. This includes the architectural, structural, and MEP designs, as well as the client's requirements for the M&E ACMV systems, that may be used for various purposes of calculations, cost estimations, design for specific results, or objectives of the company.
2. Develop the M&E ACMV design in accordance with the project requirements. This includes the selection of equipment, materials, and components, as well as the development of the system layouts and drawings.
3. Calculate and coordinate the M&E ACMV design with the architectural and structural designs. This ensures that the M&E ACMV systems are compatible with the overall design of the building for the purpose of value engineering and also design and safety, while achieving technical and engineering compliance for our systems.
4. Prepare the M&E ACMV specifications. This includes the detailed descriptions of the M&E ACMV systems, as well as the performance requirements and testing procedures.
5. Guide Bim Modellers to create the BIM models of the M&E ACMV systems to meet design specifications, and the BIM models may be used for visualization, clash detection, and coordination purposes.
6. Review and approve the M&E ACMV shop drawings. This ensures that the M&E ACMV systems are constructed in accordance with the design.
7. Monitor the installation of the M&E ACMV systems. This ensures that the systems are installed correctly and that they meet the performance requirements.
8. Provide testing and commissioning compliance factors for the M&E ACMV systems. This includes testing and adjusting the systems to ensure that they are operating properly.
9. Continuous learning to further develop new methodologies, adoption of tools or techs for use in innovative solutions and any other scopes deemed necessary as part of job designation.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills:Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage. Inexperienced candidates must be willing to learn, with training provided.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

MAJOR RESPONSIBILITIES:

1) Execution of projects:

Ensure the successful and timely execution of projects professionally within the budgetary cost and contractual completion time given by the Sales Department.

Ensure the accurate documentation of all activities /transactions.

Preparation of Bill of Materials (BOM)/production order before the commencement of the kick-off meeting.

2) Payment: Check with the Sales Department about the down payment, LC, or other payment methods before the commencement of procurement of items.

3) Workshop Drawings: After populating the BOM with all the items, work with the Design Department on generating Workshop Drawings

(GA / P&ID / Electrical drawings).

Obtain the client’s official approval on all drawings before

any commencement of works.

4) Engineering: Check the correct sizing of components (e.g. motors, pumps, valves & instrumentations).

In case of any changes, ensure other related components are correctly sized.

5) Master Production: Update the Master Production Schedule (MPS) and inform relevant departments of the strict compliance to

the delivery schedule, in consultation with the GM.

6) Kick-off Meeting: Mini-lead project kick-off meeting for the dedicated

projects handled with all critical information established

(e.g. BOM, Gantt chart, lead time)

7) Lead Time: Consistent follow-ups and confirmation from

Procurement Department on the ETA especially lead-time and technical specifications with the help of the

Design team.

: Communicate with customer in case of any changes

after discussion with the Sales Department, if authorized by

GM.

8) Factory Acceptance Test

(FAT)

: Attend together with the Engineering Department to

ensure complete factory testing is accomplished before

generating the in-house testing reports as records for the client

before delivery of the project.

9) Site Visit / Meeting: If necessary, attend and write minutes of meeting for

recording purposes at the site; and insert these in Project

File, provided site meetings are held.

10) Sub-contractor: Engagement and coordination with sub-contractors

services upon approval of GM for any ongoing projects.

Ensure the quality of sub-contractor work is strictly

according to requirements.

• Salary Range: S$3,500 – Maximum S$4,000 (depends on experience and profile)
• Working Location: (the nearest MRT is Tuas West Road - 3 mins walk)
• Working Hours: 8.00AM to 5.30PM, Monday to Friday (5 days work week)
  • A minimum Diploma in Mechanical Engineering – only this field of study is accepted.
  • Must have at least 2 years of Project Management experience.
  • Possess knowledge in AutoCAD 2D and 3D drawing.

The candidate will be responsible for maintaining IT Infrastructure network and application assets among multiple office locations.

Responsibilities:

• Managing corporate hardware (Fireworks, Networks Hardware, Servers, NAS (Synology), Open VPN System, etc)
• Installing, configuring, testing and maintaining operating systems, corporate application software and system management tools.
• Maintain and update corporate software and licenses.
• Ensure the highest levels of systems and infrastructure availability and security.
• Ensure all IT Asset inventory documentation and license renewals are updated frequently.
• Maintain security, backup and redundancu strategies.
• Identify possible areas to automate processes for the overall infrastructure (Alert, dashboard, etc)
• Monitoring of production envinroment status with the DevOps team.
• Provide remote co-support to other countries.

Requirement:

• Minimum 3 years of relevant experience
• Possess good communication skills.

Other information:

• Working hours: 9am - 6pm (Monday to Friday)
• Overtime may required occasionally (server down, etc)
• Location: Ubi Avenue 3, Vertex Tower
• 12 months contract (renewable)

Roles & Responsibilities

1. Must play a vital role in ensuring that these systems function correctly and integrate seamlessly with the building's electrical infrastructure.

2. Electrical engineers ensure that fire protection systems have access to emergency power in case of a mains power failure. This may involve designing backup power systems such as generators or battery backup systems to ensure uninterrupted operation during emergencies.

3. Proficiency in software like AutoCAD Electrical, PDMS Revit, or similar.

4. Knowledge of electrical principles, codes, and standards.

5. Expertise in circuit design and power distribution.

6. Electrical engineers design and install fire alarm systems, including smoke detectors, heat detectors, manual pull stations, and notification appliances such as horns, strobes, and speakers. They ensure that these systems meet code requirements and provide timely and effective notification of fire events to building occupants and emergency responders.

7. In larger buildings or complexes, fire protection systems may require communication capabilities to coordinate responses and relay information to emergency services.

8. Electrical engineers design and implement communication systems such as voice evacuation systems or interfaces with building management systems.

9. Electrical engineers may be involved in testing and maintenance activities for fire protection systems, ensuring that electrical components are functioning correctly and that backup power systems are operational.

10. Electrical engineers ensure that all electrical aspects of the fire protection system comply with relevant codes, standards, and regulations, such as NFPA, NEC (National Electrical Code), and local building codes.

11. Electrical engineers may provide training to building staff on the operation and maintenance of electrical aspects of the fire protection system. They also ensure that comprehensive documentation, including wiring diagrams, equipment specifications, and maintenance procedures, is available for reference.

Requirements

• Six days work Mon – Friday (8.00 am to 5.00 pm) & Sat 8.00 am to 12.30 pm) 44 hours weekly.
• Minimum Diploma in Engineering from Local Polytechnic.
• Electrical major
• Minimum 2 - 3 years Experience
• Singapore Citizen or Singapore PR
• Work on Site

Site engineers work chiefly on construction projects. They form part of construction management and use their skills and expertise to guide crew members and ensure the successful completion of a project. Site Engineers frequently liaise with clients and negotiate with vendors and suppliers to secure the best deals.

Quality Engineer

Roles & Responsibilities

This position is responsible for the timely, accurate, efficient preparation and management of Quality System, Quality tracking, Quality assurance & Quality control.

1. Full responsibility of Quality Assurance and Quality Control function to ensure Products quality are meeting customer’s expectation and accordance with regulatory requirements. (Throughout Product Life Cycle)

2. Update and maintain company Quality Management System and Documentation

3. Conduct internal audit and continuous improvement on departmental process

4. Responsible for Customer audit and ISO9001 certification.

5. Prepare for AS9100 certification and implementation.

6. Drive continuous improvement projects that lead to Product Quality and Operational Excellence.

Qualifications & Requirements

1. Bachelor’s degree with at least 3 years relevant working experience.

2. Diploma with at least 5 years relevant working experience may apply.

3. Strong knowledge of Quality system, such as ISO9001/AS9100 and other regulatory compliances.

4. Experienced on Supplier Quality management, In-coming, In-process, Outgoing inspection.

5. Preferably Electronics/Communication industry.

6. Familiar with internal & external audits.

7. Strong communication skill.

8. Possess ERP experience will be added advantage.

9. Fluent in English and Mandarin.

Responsibilities:

• To provide engineering support to the Project team from validation phase to project implementation

• To identify type of material and equipment requirement during validation phase.

• To involve in preparation and submission of engineering submittals.

• Programming of devices & creating and programming graphics in accordance with the project requirement.

• To assist in Test and Commissioning of system equipment.

• To assist in preparation and submission of operation and Maintenance Manuals.

• To provide Bill of Quantity for the projects.

• Any other duties as assigned by superior

• Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements:

• Diploma/ Degree in Engineering or Building Control in relevant field

• Min 1-2 years of relevant work experience

• Experience in PLC programming is added advantage

• Experience in handling energy management systems/ HVAC systems/ Chiller Plant systems/ Building Management Systems will be a plus

• Knowledge of IT networking and database programming, Function Block programming, Structured Language Programming or HTML5 programming will be of added advantage

• Knowledge of industrial system protocols like BACnet, Modbus, LONTalk

• Strong customer management and problem solving skills

• Able to work with the team and self-motivated

Responsibilities:

• Promote and propose Trane Controls Solutions to building owners, consultants and contractors

• Develop long term customer relationships and maximize account penetration and customer retention

• Identify potential opportunities & develop solutions with existing & new customers

• Work closely with other department to promote package solution and enhance the win rate

• Ability to effectively writes and presents proposals.

• Negotiates value, addresses resistance and closes the sale. Differentiates & made Trane as preferred supplier.

• Ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/ Degree in Mechanical/ Electrical engineering or its equivalent

• At least 1-3 years’ experience in selling HVAC or building automation system

• Good presentation, interpersonal and communication skills

• Customer driven mindset

Responsibilities

Planning: Set out the site, level it, and survey it

Design: Check plans and drawings for accuracy

Materials: Oversee material selection and requisition

Construction: Supervise and monitor the work of contractors and the site labor force

Compliance: Ensure compliance with regulations, safety standards, and sustainability policies

Communication: Liaise with clients, contractors, subcontractors, and other stakeholders

Reporting: Prepare reports for clients and other stakeholders

Costing: Prepare estimates for time and material costs

Quality: Ensure quality standards are met

Health and safety: Ensure health and safety standards are met.Skills and qualifications

Technical skills in civil, structural, geotechnical, building services, mechanical, or electrical engineering

Understanding of the construction industry

Good business acumen

Strong leadership skills

Ability to form strong relationships with clients, contractors, and other stakeholders. SALARY:3,800-4,000

LANGUAGE kNOWN: ENGLISH,TAMIL,

AGE:30 AND BELOW

EXPERIENCE: 5 YEARS

RACE:INDIAN

Job Responsibilities:

1. Design of commercial, residential, industrial buildings in precast.
2. To liaise and coordinate with consultants and main-contractor on project details and resolving technical issues.
3. Accountable for the preparation and completion of precast shop drawings with specific time and meets all clients’ requirements.
4. Accountable for accuracy and updating amendments to precast shop drawings.
5. Attend meetings with consultants and main-contractor as well as site meetings.
6. Manage drafting staff and check drawings to ensure compliance with design concept.
7. Manage, plan and schedule projects, shop drawings for submission and production.
8. To liaise internally with coordinator and production on submission/issuance of shop drawings any technical issue and keep them updated of any revision.
9. Conduct review on details of design to ensure the accuracy of shop drawings produced.

Job Requirements:

1. Bachelor degree in Civil & Structural Engineering from recognised University.
2. 3 years working experience in construction design.
3. Familiar with design analysis software such as Etabs, Prokon etc.
4. Good communication skills.

Overview

As a Design Engineer, you will assist the Technical Manager in all the designing, preparation, securing required legal documents for all the drawings (i.e.: shop drawings, structural drawings, architectural drawings and M&E drawings).

Responsibilities

1) Prepare and perform design for precast component according to client demand.

2) Responsible in the design and preparation of shop drawings and secure permits required by the government.

3) Review completed structural drawings, designs and specifications before issue for production.

4) Check and highlight all the discrepancies between Architectural, Structural and M&E drawings.

5) Co-ordinate with relevant parties on technical issues.

6) Plan & carry out production or service under controlled conditions – including product characteristics, work instructions / standard work methods, suitable equipment, Monitoring & Measurement (MM), release, delivery & post-delivery activities.

7) Ensure customer requirement are determined and met, thus enhance customer satisfaction.

8) Communicate to the organization the importance of meeting customer as well as statutory & regulatory requirement.

9) Establish the quality policy and objective.

10) Provide technical support for company operation.

11) Train, brief & supervise work and control process to work instructions / standard work methods and process plans.

12) Ensure planning & integrity of the Quality Management system (QMS).

13) Ensure Responsibility & Authority are defined & communicated.

14) Address customer satisfaction though the effective application of system, including processes for continual improvement and the prevention of non-conformity.

15) Conduct management review.

16) Ensure the availability of resources.

17) Determine, collect & analyze data for informed management decision.

18) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Bachelor degree in Civil / Structural Engineering or equivalent.

2) Minimum 3 years of relevant work experience in precast concrete industry.

3) Experience in creating 3D models of building element.

4) Prosses excellent problem definition / analytical and problem solving skills.

5) Strong verbal and written communication skills as well as excellent customer relation skills.

6) Able to work independently.

7) A team player with the ability to multi-task, prioritize and organize tasks.

Job Description & Requirements

• Act as a client representative mechanical design engineer for JTC and various ministries for the development of building and infrastructure projects
• Formulating the project briefs for consultant tender
• Managing the consultants and reviewing their design drawings, technical calculations and specification, in the interest of the clients, from design until the project completion.
• Develop innovative solutions to integrate building and facility layout to optimize land resource.
• work with our partners and academia on technologies research and deployment as well as customers to provide solutions to improve production layout efficiency.
• plan and conceptualise new and advanced engineering related technologies areas in our building facilities.
• Also draft specifications, call tender, review and recommend tender awards as well as plan and implement annual budget and workplans.

Requirements

• Background in Mechanical Engineering, with at least 5 years of relevant working experience in consultancy & design or construction companies. Being a Professional Engineer will be an added advantage

Engineer possess a good design experience in design development ideally related to precision tooling, machinery or mechatronics assembly project realization, working collaboratively with cross functional teams internally and externally.

Engineer understands basic physical & mechanical principles, various manufacturing processes and technologies particularly in moulding, stamping, machining, adhesive etc and engineering research & development through analysis, prototyping & testing.

A well-rounded mix of experimental, theoretical and design skills. Aptitude in hands-on prototype lab work, including but not limited to debug, test, assembly & measurement jig design; commission the company’s product, jigs and fixtures, customized semi and fully automatic machines or assemblies.

Solid experience in fundamentals of geometric symbols & dimensions

Tolerance stack creation and analysis

Proficiency in 2D CAD and 3D modelling with other tools such as PDM, PLM etc

Duties and Responsibilities

1) Apply engineering principles to draft, design, modify, reverse engineering and develop new products

2) Intuitive in mechanical movement, function and performance.

3) Responsible for precision tools, jigs & fixtures, mechanical design

4) Project coordination to meet customer expectations and product specifications

5) Manage design activities from planning phase to final acceptance

6) Maintain and perform proper documentation controls complying with ISO9001:2015

7) Attend customer feedback, issue of quality defects and modification improvement.

8) Check engineering drawing, material/ quantity are reported to the customer specific work requirements to all relevant manufacturing processes

9) 5.5 day work week

Job Requirements

• Requires a Bachelor’s degree or diploma in the field of manufacturing, mechanical or mechatronics engineering

• Minimum 5 years of relevant work experience

• Demonstrate operations and technical skills

• Good analytical, project management and machining techniques

• Good interpersonal and communication skill and coordination work

• Meticulous, Independent and possess good organizational skill & planning control abilities

Looking for Device Engineer for east camp and west camp.

Job Description

• Perform Asset Management of Infrastructure and Computing Devices.
• Provide computer support services (Troubleshooting, patching, confriguration, testing and maintenance) for any supported software and hardware
• Work with 3rd parties vendors
• Provide Training, Coaching and orienting users on how to use computer devices
• Be responsible for completing assigned tasks on time and to the satisfaction of the users
• Must be able to handle helpdesk duties

Requirements

• Possess at least a Nitec in IT related qualification
• 1-2 years' experience in similar capacity with technical skills and experience supporting Computing Devices
• Proficient in Microsoft Words/Excel/Outlook
• Computing Devices Platform Supported: Windows, IOS and Android
• Professional competencies that include:
• Ability to work without supervision
• Good communication skills
• Customer service
• Army camp environment, office hours, 5 days work week
• Need MSD clearance which takes around 4-6 weeks before starting work

Job Overview

The Layout Engineer is responsible for designing and optimizing the general arrangement and layout of FPSO topsides, hulls, and related systems. This role ensures that all layouts meet project specifications, safety standards, and operational efficiency, while coordinating with multidisciplinary teams to achieve seamless integration of systems.

Key Responsibilities

• Design and Optimization:Develop and optimize layout designs for FPSO topsides, modules, and hull structures.
  Ensure designs comply with safety, operability, and maintainability requirements.
  
• Multidisciplinary Coordination:Collaborate with piping, structural, mechanical, electrical, and process teams to integrate systems into cohesive layouts.
  Resolve layout clashes and ensure effective utilization of available space.
  
• Compliance and Standards:Ensure all layouts adhere to project specifications, industry codes, and regulatory standards (e.g., ABS, DNV, API).
  Incorporate fire safety, explosion protection, and evacuation criteria into designs.
  
• Review and Validation:Conduct design reviews and model walkthroughs to validate layouts and address design issues.
  Use 3D modeling software (e.g., AVEVA E3D, AutoCAD) to produce accurate and detailed layouts.
  
• Reporting and Documentation:Prepare layout drawings, specifications, and technical documentation.
  Generate reports highlighting design progress and any potential risks or deviations.
  

Qualifications and Experience

• Education:Bachelor’s degree in Engineering (Mechanical, Civil, or related field).
  
• Experience:Minimum of 10 years in layout engineering for FPSO or offshore oil and gas projects.
  Familiarity with topsides, hull integration, and module design.
  
• Skills:Proficiency in 3D modeling software (e.g., AVEVA E3D, PDMS, AutoCAD).
  Strong knowledge of offshore layout design standards and regulations.
  Excellent problem-solving and coordination skills.
  

Preferred Qualifications

• Experience with FPSO conversion projects.
• Knowledge of weight control and material handling strategies in offshore environments.
• Certification in offshore safety and engineering practices.

Key Responsibilities:
1. Design and develop mechanical systems and components using CAD/CAE tools (e.g., SolidWorks, AutoCAD, ANSYS).
2. Perform structural, thermal, and fluid flow analyses to ensure the performance and reliability of designs.

3. Create and maintain detailed engineering drawings and documentation.
4. Conduct research and development on new technologies and materials.
5. Collaborate with cross-functional teams (e.g., electrical, software, manufacturing) to ensure successful product development.
6. Troubleshoot and resolve engineering problems.
7. Stay abreast of the latest industry trends and technologies.

Qualifications:
1.Bachelor's or Master's degree in Mechanical Engineering or a related field.
2. 3 to 5 years of relevant work experience in Manufacturing industry or areas of expertise,
3. Strong proficiency in CAD/CAE software (e.g., SolidWorks, AutoCAD, ANSYS).
4. Excellent analytical and problem-solving skills.
5. Strong communication and interpersonal skills.
6. Ability to work independently and as part of a team.
7. Experience with FEA technologies or tools.

We are seeking a skilled and motivated Senior Software Engineer to join a dynamic engineering team at an international company.

As a Senior Software Engineer, you will play a critical role in designing and building robust systems while mentoring junior engineers and collaborating with cross-functional teams.

Key Responsibilities:

Design & Development:

• Architect, develop, and deploy high-quality software solutions
• Build scalable, cloud-native applications leveraging platforms like AWS, GCP, or Azure

Code Quality & Best Practices:

• Write clean, maintainable, andwell-documented code.
• Conduct code reviews, ensure adherence to best practices, and guide the team in implementing industry standards.

Collaboration:

• Work closely with the Engineering Manager, product managers, and designers to deliver impactful features.
• Collaborate with cross-functional teams to solve complex technical challenges.

Required Qualifications:

• 6+ years of experience in software development with expertise in GoLang, TypeScript, JavaScript, Python
• Experience in Frontend development would be an advantage
• Proven experience in designing, building, and maintaining scalable systems.
• Strong understanding of cloud platforms (AWS, GCP, or Azure) and microservices architecture.
• Proficiency in modern development tools, version control systems (Git), and CI/CD workflows.
• Excellent problem-solving skills with a focus on delivering high-quality results.
• Familiarity with monitoring, logging, and security best practices in cloud environments.
• Strong communication and teamwork skills with a proactive mindset.

The presales consultant will work together with the sales team on selling security solutions to fit the customer’s need. This includes solution design, presentation, demonstration and proof of concept until the closure of an opportunity. The presales engineer will also liaise with and coordinate with the engineering team for the deployment of security projects.

Job Responsibilities:

• Work closely with the sales team in designing and articulating solutions to customer
• Demonstrate the value of the solution to customers
• Gather the Business and technical requirement and develop cost effective solution for the customer
• Conduct Solution demonstration and Proof of Concept (POC)
• Response to tender, RFQs and RFPs
• Establish good relationship with the customer

Job Requirements:

• Diploma/Degree in electrical/electronic engineering, computer science or related discipline
• Experience working in System Integrator (SI) or similar environment an advantage
• Experienced working with Managed threat detection and response, database/Web/application security, OT/IOT, cloud (AWS, Azure, Google) and devsecops solutions
• Strong business acumen
• Have excellent interpersonal, negotiation and analytical skills
• Able to work independently and resourceful in completing task on hand
• Demonstrate excellent verbal and written skills to communicate effectively with cross-functional teams
• Self-motivated individual with passion in the Cybersecurity field
• Certified in Security certification a plus (Such as CISSP, AWS, CCSP)

Job Responsibilities:

· To provide technical and maintenance support for the network and security products.

· To work with the team to ensure that clients get the best support they need

· To respond to enquiries professionally

· To able to stage or research before responding to customer

· To flag out complex/difficult cases to team lead and follow through with both external and internal stakeholders

· To document troubleshooting and problem resolution steps

· To be on 24x7 rotating on-call standby for our customers & partners

Requirements:

· ITE or Diploma or Degree in Computer Science/IT Related Fields with a minimum of 1 year Network Security related experience

· Quick and keen to learn new technologies

· Resourceful, creative, independent but able to work well in a team

· Action and customer oriented; Takes initiative and adheres to deadlines

· Taking ownership of technical issues

· Good written and verbal skills; excellent phone manner.

· Firm understanding of TCP/IP, OSI Layer, network security, network routing and switching

· Good troubleshooting skills

· Support Engineers are required to be on 24x7 standby calls on a rotating basis throughout the year

· Relevant network or security certification will be plus point

About the role

Responsibilities

• Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety.
• Leads operations, assigns work orders, and/or provides technical and procedural training of coworkers and subcontractors. Arranges for subcontractors as needed.
• Consults with clients to schedule preventive maintenance and other downtime to minimize business interruption and inconvenience.
• Formulates and implements a preventive maintenance program to ensure that building machinery and systems meet or exceed their rated life.
• Monitors building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client.
• Oversees and inspects the work performed by engineering staff. Determines that work is complete, equipment is fully functional and client space is in prime working condition.
• Responds quickly to emergency situations, summoning additional assistance as needed.
• Assist as needed with routine preventative maintenance functions (filter changes, belt replacements, water treatment, etc.)
• Ability to perform work independently after being given specific instructions.
• Must be able to work effectively with other team members and safety conscious environment.
• Follow company and customer rules and guidelines.
• Respond to customer requests.
• Performs other duties as assigned.

About You

Qualifications & Requirements

College Graduate (Engineering i.e., mechanical, or Electrical or any related courses)

IFM property Management experience for commercial offices (At least 4-5 years)

High IFM and Technical knowledge particularly in equipment’s and engineering (mechanical, electrical and such)

Knowledgeable in equipment’s such as genset, UPS, BMS, FDAS, etc Certification on Safety Training would be an advantage.

Additional certification in three or more of the following: HVAC, electrical, mechanical, HVAC and refrigeration systems, process controls, mechanical power transmissions, painting, plumbing, carpentry, or engine repair.

Certifications/licenses as may be required by local or state jurisdictions.

Why join Cushman & Wakefield?

As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from;

Being part of a growing global company;

Career development and a promote from within culture;

An organisation committed to Diversity and Inclusion

We're committed to providing work-life balance for our people in an inclusive, rewarding environment.

We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development

• Project Management & Supervision
• Assist project Manager / Senior Project Engineer on design and site
• Coordination, Testing and Commissiong, Handover Documentation
• ITE, Diploma or Degree in Mechanical, Electrical or equivalent
• 1-2 yrs of working experience in the related field
• Fresh graduates are welcome to apply

• To co-ordinate and correspond with Clients, Architects, Engineers and Consultants
• To co-ordinate, correspond and supervise sub-contractors, project team.
• Attend site meetings
• Prepare, Plan work schedule and monitor work progress
• Supervision of construction progress and quality checking
• Prepare monthly progresss report and progress claim
• Supervise all structural and civil works
• Liaise with clients' consultants, RE and etc
• Maintain and monitor quality controls
• Ensure workers maintain a clean and orderly construction site at all times
• Prepare job closing inspection reports for completed construction
• Establish inventory control methods and procedures to ensure availability of resources
• Other site administrative duties and adhoc assignments as and when required.