Job Description :

• Able to plan, implement and monitor work schedule at the site.
• Coordinate and liaise with the authorities, sub-con, suppliers & workers.

Job Requirements:

• AutoCAD, BIM revit, Microsoft Project etc.
• Degree in Civil, Architectural or Mechanical Engineering.
• 5 years relevant experiences are preferred.

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing corrective and preventive maintenance of CCTV Surveillance System
• Responsible in assisting in planning of the Preventive Maintenance Schedule

Requirements

• Min Nitec in Information Technology/ Electronics/ Electrical Engineering or relevant
• Min 1 years of working experience in computer networking, CCTV set up and Video Management System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing technical support to the plating department laboratory and engineering and manufacturing activities
• Responsible in resolving all chemical related issues.

Requirements

• Min Diploma in Chemistry or Chemical Engineering
• Min 3 years of working experience in laboratory in chemical industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

(Hiring for new branch located at BUKIT BATOK area)

IF YOU ARE looking for...

• Career advancement with work-life balance;
• Substantial flexibility in workplace;
• Mon.- Fri. Office working hours
• Salary Range: Basic salary $2,600 ~ $3,500 + Incentive/Commission + Creative Performance Bonus)

Responsibilities

• Responsible for developing long term customer relationship and maximizing customer retention;
• Support on pre-sale and post-sale, not limited to solution proposal on technical requirement, design & budget control, timeline management, etc. based on projects;
• Participate in industrial related exhibitions, marketing campaigns/events;
• Other ad-hoc duties assigned by the superior.

Qualifications

• Min. Higher Nitec in Engineering (any field), or equivalent;
• Entry level applicants with the right learning attitude and positive minder are welcome to apply as comprehensive On-Job-Training will be provided;
• Excellent written and oral communication skills
• Pro-active, possess technical and Negotiation/social problem-solving skills with attention to details;

How to apply,

Please submit your application together with your comprehensive resume, not limited to the education background, career history (if any), current and expected salary(if any), and availabilities to commence work.

(We regret to inform that only shortlisted candidates will be notified)

(Hiring for new branch at BUKIT BATOK area)

IF YOU ARE looking for...

• Career advancement with work-life balance;
• Substantial flexibility in workplace;
• Creative performance bonus;

Responsibilities:

• Serve as one of a key contact for machine installation and services;
• Assist on technical training to customers;
• Excellent communicate skills to interact with suppliers and customers;
• Solid technical knowledge to provide professional solution on customers’ inquiries;
• Other Ad-hoc duties as required by the superior;

Requirements:

• Obtain min. Diploma in Engineering (any fields) or equivalent;
• Someone without relevant working experiences also welcomes to apply as on-job training will be provided;
• Pro-active, possess technical and problem-solving skills with attention to details;

How to apply,

Please submit your application together with your comprehensive resume, not limited to the education background, career history (if any), current and expected salary(if any), and availabilities to commence work by ‘Apply’ the link.

(We regret to inform you that only shortlisted candidates will be notified)

Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and deploying functional networks which include LAN, WLAN, WAN
• Responsible in monitoring network performance and integrity and resolving issues tiers of support have escalated by troubleshooting cloud and local infrastructure
• Responsible for planning out network installation and/or upgrade project, assign milestone tasks to support personnel and meet company deadlines for full implementation,
• Responsible for creating, overseeing and testing security measures
• Responsible for mentoring junior team members

Requirements

• Min Degree in computer Science, Engineering or a related field
• Min 3 years of working experience as a Senior Network Engineer or Network Administrator
• Professional certification (e.g. CCNP, CCDP)
• Experience in network administration and architecture
• Experience with access control models and network security

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for evaluating and qualify products to fulfil customer expectations regarding reliability, usability, and operating life

Requirements

• Min Diploma in Engineering
• Min 2 years of working experience in failure analysis of metals and materials related products
• Experience with test or life cycle management tools an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Site viewing , co-ordination and oversee ongoing job progress for AV products
• Termination, testing, commissioning and project handover
• Perform preventive maintenance

Requirements:

• "O" Level/ITE/Diploma/Entry level preferable with electrical experience
• Computer/electrical/electronic knowledge will be added advantage
• Preferably possess Class 3 license
• Able to plan & work with sub-contractor to complete the project within a given time frame
• Possess good interpersonal and organization skills
• Good soldering skill on audio & video connectivity
• A good team player customer orientated

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities & Duties

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issue.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring products produced meet the product and customers' quality requirement
• Responsible for developing and improving the processes to gain productivity, efficiency, quality and costs.
• Responsible for coordinating NPI/NPQ activities with details and meeting timeline.
• Responsible for supporting and resolving daily technical issues in operations
• Responsible for supporting analysis of failures from yield loss, reliability failures, new products, new materials.

Requirements

• Min Diploma in Electronic Engineering, Material Science or relevant
• Min 5 years of working experience in semicon assembly and test environment
• Experience in Assembly FOL of dicing, die attach, wire bond
• Experience in maintenance of assembly and test machines of dicing, die attach, wire bond encapsulation, testing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026