• Assist Project Manager on planning to ensure that materials, manpower, machineries, authorities approval and site conditions are ready before the work starts.
• Supervise work for the contract and ensure that it is done in compliance with the contract specification including confirming and verifying that the work is done.
• Manage the project to ensure that work is carried out in a manner that meets the quality, environmental, health and safety objectives and targets set out by the management.
• Coordinating with authorities, clients and vendors
• Preparation of shop drawings and as-built drawings.
• Candidate must possess at least a Bachelor's Degree in Civil Engineering recognised by Professional Engineers Board (PEB)

Job Description

• Be responsible for managing day to day lifting operations
• Plan, organize, supervise and liaise closely with sub-contractors and operation teams on all ongoing lifting activities
• Conduct routine checks and inspections of works on site to ensure compliance with authorities' and client’s requirements

Requirements

• Must have IES certificate
• Must have at least 3 years of experience as lifting Engineer
• Able to start work with short notice

• Assist Project Manager on planning to ensure that materials, manpower, machineries, authorities approval and site conditions are ready before the work starts.
• Supervise work for the contract and ensure that it is done in compliance with the contract specification including confirming and verifying that the work is done.
• Manage the project to ensure that work is carried out in a manner that meets the quality, environmental, health and safety objectives and targets set out by the management.
• Coordinating with authorities, clients and vendors.
• Preparation of shop drawings and as-built drawings.
• Candidate must possess at least a Bachelor's Degree in Civil Engineering recognised by Professional Engineers Board (PEB).

As a NAND CMOS Process Integration Engineer in the Singapore Technology Development department at Micron Technology Inc., you will be responsible for developing 3D NAND CMOS devices scaling and enhancing their performance, reliability and manufacturability.

Responsibilities:

• Develop and innovate critical CMOS Front end/interconnect module. Drive multi-functional teams to optimize existing process flows and develop new innovative solutions to meet product requirements and manufacturability.
• Develop/re-define critical specifications criteria for optimum product performance and drive activities to get them to manufacturing process capability.
• Extract and analyze inline, probe, parametric, reliability, and other critical metrics and predict future behavior of the CMOS device performance of the product to enable early innovative solutions to meet product and device specifications.
• Early introduction, characterization and validation of new CMOS device models and test structures for developing future NAND products.
• 3 dimensions analysis with the use of K2 view to extract layout information and combine with the doping profiles of each implant step for product development and integration solutions.
• Interact and collaborate with TCAD, modeling, and layout teams to drive clearer definition of CMOS device and reliability improvements across multiple tech-nodes and designs.
• Coordinate activities at manufacturing site towards gating experiment funding, conversions, and effectively communicate decisions made to all R&D, manufacturing, and relevant partners.
• Take on leadership role at quarterly yield summits and monthly program reviews in summarizing complex problems, deriving and explaining actions taken to address them and getting R&D, manufacturing, and senior management teams on the same page.
• Assist in the transfer of a new technology from R&D to manufacturing and contribute towards ensuring successful ramp and qualification. Supporting the transfer, documentation and training of module fundamentals into manufacturing.

Requirements:

• MS or PhD in Electrical Engineering preferably specialized in Microelectronics and Semiconductor Device Physics. Prior technology development and tech transfer/manufacturing experiences are preferred.
• Fresh MS/PhD candidates with knowledge of semiconductor process Integration and CMOS engineering.
• Direct fab experience with nonvolatile memories manufacturing, knowledge of TCAD, K2 view layout, and NAND product are highly desirable.
• Ability to develop a strong, holistic, end-to-end understanding of CMOS device and its related module on NAND technologies, related structural and electrical fail mechanisms.
• Deep understanding of probe failure mechanism, ability to do electrical bench data collection.
• Self-motivated, self-governing with proven ability to work in a demanding and dynamic environment.
• Experienced in coordinating cross-functional teams to achieve a goal.
• Solid data analysis, communication and reporting abilities with demonstrated presentation abilities.
• Curiosity and natural tendency of learning new things independently.
• Ability to travel for extended periods of time to the US for collaborative R&D work.

1. Plan, devise and implement production schedule for the spice processing and packing operation.

2. Plan, Devise and implement maintenance program for packing equipment,

3. Grade and Blend spices based on spice characteristics.

4.Set up spice packing machine for the specific operation.

5. Monitor spice quality during spice packing.

6. Monitor the ground spices for fineness, aroma and essential oil volatility using sensory perceptions.

7. Clean and maintain spices packing equipment.

8. Work shift operations.

9. Tabulate production hours, machine time, product utilized and product output.

10. Supervise routine maintenance of production systems.

11. Supervise trouble shooting of production systems.

12. Supervise the inventory of production material.

Job Description: Azure Data Engineer

We are seeking a skilled Azure Data Engineer with a minimum of 2 years of hands-on experience in Azure data services. The ideal candidate will play a critical role in designing, developing, and optimizing data pipelines and analytics solutions to support our organization’s data-driven initiatives.

Key Responsibilities:

• Design, develop, and maintain data pipelines using Azure Data Factory.
• Implement and manage data integration and transformation workflows.
• Build, optimize, and maintain scalable data solutions using Azure Synapse Analytics or Azure Datawarehouse.
• Collaborate with cross-functional teams to gather requirements and deliver data solutions aligned with business objectives.
• Ensure data quality, consistency, and reliability across all data processes.
• Monitor, troubleshoot, and improve data workflows for performance and scalability.
• Stay updated on industry best practices and emerging Azure technologies to implement innovative solutions.

Requirements:

• Experience: At least 2 years of hands-on experience with Azure Data Factory and Azure Synapse Analytics/Datawarehouse.
• Certifications: Preferably holds a Microsoft Azure Data Engineer Associate certification or other relevant Microsoft certifications.
• Strong understanding of data integration, ETL/ELT processes, and data modeling.
• Familiarity with Azure cloud ecosystem and services (e.g., Azure Storage, Azure SQL Database).
• Solid experience with SQL for querying and managing data.
• Strong problem-solving skills and the ability to work independently or in a team environment.
• Excellent communication and interpersonal skills for effective collaboration with technical and non-technical stakeholders.

Preferred Qualifications:

• Experience with data governance, security, and compliance in cloud environments.
• Knowledge of scripting languages (e.g., Python, PowerShell) for automation.
• Familiarity with big data tools and frameworks within Azure.

Roles & Responsibilities

• Perform routine inspections, maintenance, and repairs on mechanical systems/ devices.
• Diagnose and provide technical support for troubleshooting and resolving mechanical issues.
• Assist in the calibration, alignment and preventive maintenance of machine parts to ensure proper functionality.

Requirements:

• Min 5 years of relevant working experience and knowledge.
• Able to maintain self-motivation to overcome challenging tasks.

Roles & Responsibilities:

• Perform routine inspections, maintenance, and repairs on mechanical systems/ devices.
• Diagnose and provide technical support for troubleshooting and resolving mechanical issues.
• Assist in the calibration, alignment and preventive maintenance of machine parts to ensure proper functionality.

Requirements:

• Min 5 years of relevant working experience and knowledge.
• Able to maintain self-motivation to overcome challenging tasks.

1.To assist attend and prepare for tender/ quotation related matters

2. To plan and prepare for works as per required

3. To attend meeting with clients, authorities and others when necessary

4. To carry out work related to civil & structural such as construction building supervision, periodic structural inspections, road audit and any other jobs as per instructed.

5. To prepare reports and any other necessary paper works as required by clients, authorities or company.

6. To carry out other tasks/ instructions from Project Director and management of the company.Softskill

1. Able to communicate and have good writing skill in English

2. Have good knowledge in computer skill such as Microsoft Office, Design softwares and Autocaad.

3. Able to deliver quality works under short deadline.

4. Post a positive work attitude such as able to perform task independently with minimum supervision, good team works and hardworking

5.Possess good leadership, planning and decision-making skills

6.Possess good communication and interpersonal skills

Job Description:

· To make sure that PLC and SCADA system equipment are tested and commissioned in conformity with the design drawings, testing procedures, safety measures and QA/QC system.

· To manage the PLC Testing & Commissioning activities (Integration, Validation, SAT, and ITC)

· Software design, configuration, programming, testing installation, commissioning, optimization, and

maintenance of multiple PLC and STEP7 SIMATIC MANAGAER and Siemens PCS7 process control systems or

Siemens DCS systems.

· Developing of Process Logic in Ladder, Statement List and Functional Block Diagram, Continuous Function Chart

(CFC), Structured Control Language (SCL), SIEMENS- various SERIES using STEP7 SIMATIC MANAGER. Conversant with IEC 61131-3 (international standard for programmable controller programming languages).

· Knowledge working in Allen Bradley PLC1756-L56, using AB RS Logix 5000 for programming, using Kepware

OPC server (KEP Server EX).

· Knowledge in Profibus DP, Ethernet, Modbus RS485 and TCP /IP, IEC61850.

· To carry out Point-to-point test with substation electrical equipment.

· To carry out Point-to-point test with SCADA interface.

· To ensure the testing are in conformance with testing procedures.

· To management and update of the modification’s details for future as-built file.

· To prepare testing procedures & test forms.

· To record the test results in the test forms and prepare for report submission.

· Transmission of data to the QC Engineer whenever the issuances of a Corrective Action Requests.

· To attend the testing meetings relevant to his sites and participates during site visits.

· To co-ordinate activities with the Client and the external interface parties (Subsystem Work Contractors)

· Manage his team staff, preparing work schedules and assigning specific duties.

· To plan the activities and to follow-up the proper progress against deadlines and manpower.

· To co-ordinate with client and consultant, on Site acceptance test and ensure that established procedures are

complied.

Job Requirements:

· Bachelor’s degree in business, Electrical Engineering, or a related field.

· Experience in business development or sales within the power supply, railway and other electrification sector is

highly preferred

· Excellent negotiation, communication, and interpersonal skills.

· Ability to build strong relationships with clients and industry stakeholders.

· Results-oriented with a proactive approach to problem-solving.

· Proficiency in Microsoft Office Suite and CRM systems.

· Knowledge of the railway electrification industry and relevant regulatory standards.

ob Responsibilities and Duties :

- Develop a deep understanding of design specifications based on customer requirements, , organizational goals, and business strategies. Conceptualize and develop solutions based on project requirements and Company standards through the use of simulations/modelling to support design concept used.

- Develop design specification sheet with relevant info related to the project and update as and when required and distribute to relevant parties.

- Carry out detailed cycle time study for individual modules to select the appropriate machine or module design. Develop 3D model of the machine and/or modules assigned with optimised design for manufacturing, cost, quality and safety.

- Initiate and carry out internal design reviews to share and explain the completed modules with other departments.

- Initiate and carry out design review with customer base on project schedule

- Revise design and documents based on both internal and external review·

- Create and update flow chart for the module or the entire machine

- Create part drawings and assembly drawings based on approved design and obtain approval from department manager

- Create Bill Of Materials (BOM) for the modules assigned based on design schedule given.

- Create drawing release file and send out drawings for quotation

- Send out standard part list for quotation based on BOM.

- Receive quotation and make price comparison spreadsheet

- Raise PR and get department manager approval and send to Purchase department for negotiation and ordering.

- Promptly support any design issues discovered during fabrication and /or assembly stages

- Make necessary modifications needed, update design, drawings and get approval from department manager.

- Release revised drawings to supplier and internal assembly team.

- Support machine assembly team as and when necessary, with set up and fine tuning of machines.

- Carry out all the activities based on the project schedule given.

- Meet quality standards while maintaining working knowledge of relevant technologies and best practices, and upholding company policies, internal, customer standards for machine building and safety.

- Develop, train, and educate junior engineers, guide technical direction, and act as a technical liaison between customers

The Job

1. Responsible for assembly, debug and test run of customized modular machines and it’s commissioning.
2. Provide on-site technical support at customer premise for equipment operation.
3. Perform design modifications through: Simplified design, reduced parts, using cheaper alternatives, while maintaining or enhancing the performance of products in terms of cost reduction.
4. Procure and/or assist in the procurement of necessary items to enable the performance of above duties.
5. Writing and maintenance of all necessary documentations, work and assembly instructions, manufacturing and test procedures.

The Requirements

1. Nitec / Higher Nitec / Diploma in Mechanical Engineering with 2 to 3 years’ relevant experience.
2. Knowledge of industrial automation, jigs and fixture design, FMEA, SPC, CAD as well as experience in machine design are added advantages
3. Self-Disciplined with strong project management skills
4. Can work independently
5. Good interpersonal and communication skills
6. Required to travel when necessary

Job Description:

· To make sure that PLC and SCADA system equipment are tested and commissioned in conformity with the

design drawings, testing procedures, safety measures and QA/QC system.

· To manage the PLC Testing & Commissioning activities (Integration, Validation, SAT, and ITC)

· Software design, configuration, programming, testing installation, commissioning, optimization, and

maintenance of multiple PLC and STEP7 SIMATIC MANAGAER and Siemens PCS7 process control systems or

Siemens DCS systems.

· Developing of Process Logic in Ladder, Statement List and Functional Block Diagram, Continuous Function Chart

(CFC), Structured Control Language (SCL), SIEMENS- various SERIES using STEP7 SIMATIC MANAGER. Conversant

with IEC 61131-3 (international standard for programmable controller programming languages).

· Knowledge working in Allen Bradley PLC1756-L56, using AB RS Logix 5000 for programming, using Kepware

OPC server (KEP Server EX).

· Knowledge in Profibus DP, Ethernet, Modbus RS485 and TCP /IP, IEC61850.

· To carry out Point-to-point test with substation electrical equipment.

· To carry out Point-to-point test with SCADA interface.

· To ensure the testing are in conformance with testing procedures.

· To management and update of the modification’s details for future as-built file.

· To prepare testing procedures & test forms.

· To record the test results in the test forms and prepare for report submission.

· Transmission of data to the QC Engineer whenever the issuances of a Corrective Action Requests.

· To attend the testing meetings relevant to his sites and participates during site visits.

· To co-ordinate activities with the Client and the external interface parties (Subsystem Work Contractors)

· Manage his team staff, preparing work schedules and assigning specific duties.

· To plan the activities and to follow-up the proper progress against deadlines and manpower.

· To co-ordinate with client and consultant, on Site acceptance test and ensure that established procedures are

complied.

Job Requirements:

· Bachelor’s degree in business, Electrical Engineering, or a related field.

· Experience in business development or sales within the power supply, railway and other electrification sector is

highly preferred

· Excellent negotiation, communication, and interpersonal skills.

· Ability to build strong relationships with clients and industry stakeholders.

· Results-oriented with a proactive approach to problem-solving.

· Proficiency in Microsoft Office Suite and CRM systems.

· Knowledge of the railway electrification industry and relevant regulatory standards.

Job Responsibilities:

· Able to plan, implement and monitor work schedule for all necessary sites.

· Ability to source for suppliers / sub-cons for smooth operation on site Independent & able to resolve any technical difficulties & problem may arise on site

· Assist the Project Manager in the daily coordination, planning and execution of the project plan at site.

· Liaison with the relevant parties involved in the project work.

· Prepare site program chart for management review regularly

· Other related duties assign by company from time to time

Requirements:

· Candidate must possess at least a Diploma/Degree with 1-2 years relevant experience in Building construction

· Experienced in Civil Engineering related field is added advantage

· Possess good communication skill for effective follow-up and attention to details

· Ability to interact with all levels in a professional & responsive manner display maturity and able to handle stress

· Willingness to learn and progress

· Enthusiastic team player

Assistant Electrical EngineerAssist Engineer on Electrical design drawing- Assist Engineer on assembly / installation of custom-made machine- Assist Engineer on day to day tasks

Requirement- Minimum Bachelor Degree in Mechatronics / Electrical- Preferably with knowledge in Solidworks and AutoCAD- Minimum 1 - 2 years of relevant working experience, no experience will be considered- Good learning attitude, team player

Responsibilities:

• Coordination, planning and execution of routine Maintenance and Operation job for Water/Waste Water treatment equipment & system
• Carry out plant performance monitoring, water quality checking, data trending and submit the analysis report to system owner.
• Water system trouble shooting and emergency response.
• Provide system improvement and modification solutions to customer along with engineering team.
• Good altitude and communication with clients to meet the client and system requirement.
• Good teamwork with multi-disciplinary engineering knowledge.
• Job coverage is the whole Asia Pacific region.

Qualifications

• Qualifications with Diploma or Degree in Mechanical or Chemical engineering
• Minimum 3 years working experience with Water & Wastewater treatment System.
• Hands on experience with RO membrane replacement, RO & EDI CIP Cleaning, MMF, ACF and Softener Media Replacement.

ob Responsibilities and Duties :

- Develop a deep understanding of design specifications based on customer requirements, , organizational goals, and business strategies. Conceptualize and develop solutions based on project requirements and Company standards through the use of simulations/modelling to support design concept used.

- Develop design specification sheet with relevant info related to the project and update as and when required and distribute to relevant parties.

- Carry out detailed cycle time study for individual modules to select the appropriate machine or module design. Develop 3D model of the machine and/or modules assigned with optimised design for manufacturing, cost, quality and safety.

- Initiate and carry out internal design reviews to share and explain the completed modules with other departments.

- Initiate and carry out design review with customer base on project schedule

- Revise design and documents based on both internal and external review·

- Create and update flow chart for the module or the entire machine

- Create part drawings and assembly drawings based on approved design and obtain approval from department manager

- Create Bill Of Materials (BOM) for the modules assigned based on design schedule given.

- Create drawing release file and send out drawings for quotation

- Send out standard part list for quotation based on BOM.

- Receive quotation and make price comparison spreadsheet

- Raise PR and get department manager approval and send to Purchase department for negotiation and ordering.

- Promptly support any design issues discovered during fabrication and /or assembly stages

- Make necessary modifications needed, update design, drawings and get approval from department manager.

- Release revised drawings to supplier and internal assembly team.

- Support machine assembly team as and when necessary, with set up and fine tuning of machines.

- Carry out all the activities based on the project schedule given.

- Meet quality standards while maintaining working knowledge of relevant technologies and best practices, and upholding company policies, internal, customer standards for machine building and safety.

- Develop, train, and educate junior engineers, guide technical direction, and act as a technical liaison between customers

Responsibilities

1.Regulatory and Compliance Leadership:

· Serve as the primary point of contact for all regulatory and compliance matters related to Offshore Wind and Offshore Substation projects

· Develop and maintain a comprehensive understanding of international and local regulations, including environmental, local regulation such as BOEM, safety, and maritime regulations.

· Stay abreast of regulatory requirements, flag requirements, and industry best practices, developing and updating regulatory compliance plans,policies, and procedures.

2. Regulatory Review and Documentation:

· Conduct regulatory reviews of offshore substation designs and documentation to ensure compliance with relevant standards and regulations.

· Prepare and submit regulatory compliance documents, assist and collaborate with developer and/or client to provide input for permit applications, safety cases, and environmental impact assessments where require.

· Review and analyze reports from third-party consultants, providing critical feedback and recommendations.

3. Team Management and Development:

· Lead and mentor a team responsible for regulatory compliance and technical safety, setting objectives, monitoring performance, and providing career development guidance.

· Direct the team's progress in delivering regulatory requirements, plans,and reports, ensuring these are integrated into the design at an early stage.

· Manage the transformation of contractual specifications into cost-effective engineering solutions, following relevant codes, standards, and classification requirements.

4. Project Coordination and Support:

· Collaborate with other engineering disciplines (e.g., E&I, Piping,Mechanical) on problem areas related to regulatory compliance and technical safety.

· Provide regulatory compliance to commercial marketing, bidding, and procurement activities during pre-contract and contract development phases of Offshore wind and substation projects.

· Manage team coordination on design changes, ensuring follow-up on regulatory updates.

5. Interface and Liaison:

· Liaise with regulatory bodies, classification societies, third parties andother relevant authorities to obtain necessary approvals and certifications.

· Manage relationships with external consultants, regulatory specialists, and internal departments to ensure a holistic approach to compliance.

6. Strategy and Program Development:

· Develop and implement compliance strategies and programs to meet regulatory requirements and industry best practices.

· Initiate the development of compliance matrices to maximize team performance, accuracy, and design compliance.

· Contribute to the development of company policies and procedures related to regulatory compliance.

7. Risk Management and Auditing:

· Conduct internal audits to assess compliance with regulatory requirements and company policies specific to offshore wind and substation projects.

· Manage the development and maintenance of a recommendation register, ensuring that feedback from safety studies is integrated into project designs.

8. Reporting and Communication:

· Prepare regular reports on compliance status and regulatory risks for Project Engineering Manager.

· Review team reports for accuracy and liaise with customers, statutory, and classification authorities on design and compliance issues affecting production start-up.

9. Training and Development:

· Develop and deliver training programs to ensure staff awareness of regulatory requirements and compliance procedures.

· Provide career development guidance and routine administrative responsibilities, such as leave and course approvals.

Requirements

· Bachelor’s degree in electrical engineering, Marine Engineering, Environmental Science, or related field, an advanced degree is preferred.

· Minimum of 5-7 years of experience in regulatory affairs and compliance within the offshore industry.

· In-depth knowledge of international and local regulations applicable to offshore wind engineering and substation design.

· Strong understanding of risk assessment and management principles.

· Experience in preparing and submitting regulatory compliance documents and permit applications.

· Familiarity with technical aspects of offshore wind and Offshore substations, including high voltage systems, grid connection requirements, and marine engineering considerations.

· Proven experience in leading teams, mentoring, and guiding junior engineers.

· Excellent analytical, problem-solving, and communication skills.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Amiralty Yard)

60 Admiralty Road West, Singapore 759947

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Product Integration Engineering team strives to deliver pioneering process capability, best-in-class bits per wafer (Yield) with highest quality and fastest speed through innovation and collaboration with multi-functional team. With the diversity of technology in DRAM/NAND and geography (TD development sites – Boise/Japan, 5 manufacturing sites – US (F6), Taiwan (F11/F16), Japan (F15) and Singapore (F10)), Frontend Central PIE team will be responsible to identify best-known-method holistically, align best-known-method timely and implement improvement systematically across the network. As FE Central PIE Standardization & Metrics Senior Engineer you will be responsible to lead the the team on:

• Drive for alignment and standardization across various fabs on Best-Know-Methods (BKMs)
• Develop Metrics to measure the standardization, sustainability, scalability and synchronization of the BKMs.
• Identify gaps in current programs and use SMART metrics to drive effectiveness and efficiency on program deliverables.
• Transform yield SEAL and SWATs to achieve cPIE missions, improving network resource/talent leverage.
• Constantly drive productivity and eliminate inefficiency / ineffectiveness through metrics and reports automation, drive data to be accurate, accessible and comprehensive.
• Collaborate with various multi-functional teams on yield reports, develop business process to optimize current system with clear roles and responsibility.
• Promotes cPIE teams alignment and collaboration with crtical metrics /metrics definition.
• Collaborate with WFD to standardize network PIE training curriculum, connect with cPIE and network PIE to build training courses.
• Develop human resource strategies to attract, retain and reward talent and effectively deploy them to enhance every individual’s potential
• Engage team members and drive accountability, performance driven culture through clear communication, formal and informal feedback, goals and critical metric
• Drive diversity, equality, and inclusive working environment and foster teamwork and trust in the organization
• Effectively manage team’s internal and worldwide meeting structure. Ensure meetings are efficient, effective and targeted to achieve required outcomes.
• Maintain knowledge of equipment and materials safety concerns. Take a proactive approach to safety, and apply corporate and site safety resources for partner concern issues as appropriate.
• Maintain a strong and open relationship with peer group and managers in other functional areas within CPIE and outside organizations such as Fab, FE PMO/SIC/OCT and Global Quality.
• Travel to Micron sites as necessary for face to face collaboration.

Requirements:

• Bachelor’s Degree in Engineering and related field of study
• 2 years experience in engineering field
• Applicants must have a proven ability to collaborate globally and influence by indirect leadership to drive resourcing to critical projects across Micron
• Applicants must have a proven capability in dealing with complexity and an ability to use resources effectively to bring clarity to required actions
• Applicants must hold a record of performance excellence for current area of responsibility; and are recognized as having demonstrated successful leadership characteristics both in present and past jobs
• Applicants must have demonstrated the ability to solve problems across multi-functional groups, both within and outside their department/Site

Job Responsibilities and Duties:

-Develop a deep understanding of design specifications based on customer requirements, , organizational goals, and business strategies. Conceptualize and develop solutions based on project requirements and Company standards through the use of simulations/modelling to support design concept used.

-Develop design specification sheet based on Mechanical design and update as and when required and distribute to relevant Develop system architecture based on mechanical design, flow chart and other control system requirement specified by customer taking in to consideration of optimised design for manufacturing, cost, quality and safety.

-Initiate and carry out internal design reviews to share and explain the completed modules with other departments.

-Initiate and carry out design review with customer based on project schedule

-Revise design and documents based on both internal and external review

-Create wiring diagram for various control panels and filed wiring and approval from department manager

-Create Bill Of Materials (BOM) for various panels and sub panels based on design schedule given

-Create drawing release file and send out drawings for panel and field wiring quotation

-Send out standard part list for quotation based on BOM

-Receive quotation and make price comparison spreadsheet

-Raise PR and get department manager approval and send to Purchase department for negotiation and ordering.

-Prepare offline PLC/PC program for various panels based on the design requirements.

-Make necessary modifications needed, update design, drawings and get approval from department manager.

-Release revised drawings to wiring and assembly team

-Support panel and filed wiring team as and when necessary

-Carry out PLC I/O configuration, Netother devise driver set up and carry out I/O check and wiring integrity check

-Set up and debug PLC/PC program

-Carry out all the activities based on the project schedule given

-Meet quality standards while maintaining working knowledge of relevant technologies and best practices, and upholding company policies, internal, customer standards for machine building and safety.

-Develop, train, and educate junior engineers, guide technical direction, and act asa technical liaison between customers

SPECIAL NOTES:

The incumbent (s) of this position is expected to perform all other related duties as assigned

Responsibilities and Duties

· Develop a deep understanding of design specifications based on customer requirements, , organizational goals, and business strategies. Conceptualize and develop solutions based on project requirements and Company standards through the use of simulations/modelling to support design concept used.

· Develop design specification sheet with relevant info related to the project and update as and when required and distribute to relevant parties.

· Carry out detailed cycle time study for individual modules to select the appropriate machine or module design. Develop 3D model of the machine and/or modules assigned with optimised design for manufacturing, cost, quality and safety.

· Initiate and carry out internal design reviews to share and explain the completed modules with other departments.

· Initiate and carry out design review with customer base on project schedule

· Revise design and documents based on both internal and external review

· Create and update flow chart for the module or the entire machine

· Create part drawings and assembly drawings based on approved design and obtain approval from department manager

· Create Bill Of Materials (BOM) for the modules assigned based on design schedule given

· Create drawing release file and send out drawings for quotation

· Send out standard part list for quotation based on BOM

· Receive quotation and make price comparison spreadsheet

· Raise PR and get department manager approval and send to Purchase department for negotiation and ordering

· Promptly support any design issues discovered during fabrication and /or assembly stages

· Make necessary modifications needed, update design, drawings and get approval from department manager.

· Release revised drawings to supplier and internal assembly team

· Support machine assembly team as and when necessary, with set up and fine tuning of machines

· Carry out all the activities based on the project schedule given

· Meet quality standards while maintaining working knowledge of relevant technologies and best practices, and upholding company policies, internal, customer standards for machine building and safety.

· Develop, train, and educate junior engineers, guide technical direction, and act as a technical liaison between customers

SPECIAL NOTES:

The incumbent (s) of this position is expected to perform all other related duties as assigned

• Develop ATE test program, test hardware and bench evaluation board for analog, digital and power semiconductor devices.
• Research new test methodology for better test coverage and test time reduction.
• Work with multi-functional team to meet new product release schedule
• Proficiency in C++ Programming
• Degree in Electrical/Electronics Engineering
• Fresh graduates with good academic result are welcome to apply.

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

• Requires a BS in Electrical or Computer Engineering
• Some years of relevant experience is preferable
• Fresh graduates are encouraged to apply

Skills and responsibilities:

• Utilize commercial and in-house EDA tools (e.g. Synopsys, Cadence, Siemens) for the design and implementation of 100 ~ 400 million gate integrated circuits in 7nm/5nm/3nm/2nm process technologies.
• Proficient with a full Netlist/Gates to GDS flow, inclusive of all construction stages (e.g. RTL synthesis, placement, clock tree synthesis, detailed routing, physical verification, formal verification and timing analysis) for complex digital blocks of up to 12Mgates/3M instances with embedded macros. Ability to handle multiple block assignments in parallel is required.
• Proficiency in UNIX/Linux and scripting languages is advantageous.

Required Qualifications:

• Degree, Masters or PhD in Electrical/Electronics/Computer engineering.
• Minimum of 2 years or more experience in a relevant field.

Description

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing Diffusion team on the key technology issues that need Technology Development (TD) breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise TD Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.
• Ownership of module business process

Requirements

• PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Physics are welcomed to apply.
• Minimum 4 years of relevant experience in Diffusion process development.
• A deep understanding of flow dynamics , thermodynamics, physical phenomena and their direct application to Diffusion deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 2 - 4 months at a stretch to work on technology development.