1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Job Description & Requirements

1. Preparation of shop drawing

2. Preparation and submission of necessary document prior to start boring work

3. Supervise in confirmation of soil boring and rock caring. And submissio0n of pile length calculation (if required)

4. Co-ordination with main contractor and consultant’s representative.

5. Preparation and submission of bored pile installation record

6. Supervise and arrange the site team & progress thereafter report to project manager

7. Preparation of bored pile summary and submit to main contractor and HQ

8. Submission of as built pile penetration and eccentricity drawing

9. Receiving the time to time instruction of project manager

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

We are looking for a mechanical/electrical engineer to troubleshoot/install cnc machines.

They must have some basic repairing/maintenence knowledge of cnc machines.

Those who can operate cnc machines and are willing to learn how to repair cnc machines will also be considered.

Class 3 license is a plus

Job Descriptions:

• Perform structural design and analysis, loading calculation and drawings for ETFE Skylight, Tensile Membrane, Structural Steel Structures.
• Able to perform Finite Element Analysis Modeling and Analysis of Structure.
• Preparation of 3D structural models and shop fabrication drawings, method statement etc.
• Work closely with architects, engineers, general contractors, fabricators and other professionals.
• Involve in supervising projects and provide progress report.
• Make sure projects meet authorities requirements.

Job Requirements:

• Minimum PhD or Masters degree in Civil and Structural Engineering or equivalent
• Minimum 2 years relevant experience in Civil and Structural Engineering design
• Proficiency with steel 3D modelling, analysis & design software such as Rhino and grasshopper.
• Proficiency with programming language especially C++ , Python and Fortran
• Able to produce detailed layout drawings
• Experience in Tensile Membrane, ETFE Skylight and Steelwork design is an advantage
• Good command of English

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Job Summary

An exciting opportunity for Data Engineer to be a part of a project for strategic initiatives in architecting, designing and building next-generation cloud-based data platforms.

Mandatory Skill-set

• Degree in Data Engineering, Computer Science, Information Technology;
• At least 5 years of experience in data engineering and modelling;
• Strong hands-on exposure in data science, data analytics and / or data engineering;
• Deep understanding of system design, data structure and algorithms, data modelling, data access, and data storage;
• Advanced SQL knowledge and experience working with relational databases, query authoring (SQL) as well as working familiarity with a variety of databases;
• Good understanding in using cloud technologies such as AWS, Azure, and Google Cloud;
• Experience with orchestration frameworks such as Azure Data Factory, Airflow;
• Experience with distributed data technologies such as Spark, Hadoop;
• Proficiency in programming languages such as Python, R, Java, or Scala;
• Familiarity with building and using CI/CD pipelines;
• Familiarity with DevOps tools such as Git, Terraform, Git;
• Strong hands-on exposure with ETL Extract, Transform, Load tools;
• Possess strong written and verbal communication abilities, effectively conveying information to various stakeholders.

Desired Skill-set

• Experience in designing, building, and maintaining batch and real-time data pipelines;
• Experience with Databricks or Snowflake.

Responsibilities

• Work closely with the various team in architecting, designing and building ingestion pipelines to collect, clean, merge, and harmonize data from different source systems;
• Involved in architecting and scaling data analytics infrastructure on cloud environment; development of systems, architectures, and platforms that can scale large volume and variety;
• Architect and build ingestion pipelines to collect, clean, merge, and harmonize data from different source systems;
• Improve and optimize the workloads, processes to ensure that performance levels can support continuous accurate, reliable, and timely delivery of data products; ensure maximum database uptime;
• Monitoring of databases and ETL systems for database capacity planning and maintenance, monitoring, and performance tuning; diagnose issues and deploy measures to prevent recurrence;
• Construct, test, and update useful and reusable data models based on business data needs;
• Engagement and collaboration with product managers, software engineers, data analysts and data scientists to build scalable and data-driven platforms and tools;
• Collaborate with data stewards to establish and enforce data governance policies, best practices and procedures;
• Assist to maintain master data catalogue to document data assets, metadata and lineage;
• Implement and enforce data security best practices, including access control, encryption, and data masking, to safeguard sensitive data;
• Involved in managing production services that provide analytics capabilities to our various data users across the division.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

Job Highlights

• Career Development Opportunities
• Duty Meals, Birthday Leave and Flexible benefits
• Complimentary Room Nights
• Discounted Room and Dining Rates

The Assistant Chief Engineer supports the Director of Engineering in overseeing both the operational and design aspects of the hotels facilities. This role involves utilizing design software like AutoCAD to create and modify technical drawings, support engineering projects and ensure that all designs align with local standards and hotel requirements.

As an Assistant Chief Engineer (Project & Operation) we rely on you to

Project Management

• Assist in Planning & Execution - Collaborate with DOE to plan, implement, and overseeing engineering projects, including renovations, upgrades and new installations
• Prepare project budgets and manage expenditures to ensure that projects are completed within allocated financial resources
• Liaise with contractors and service providers to ensure that project specifications and schedule are met
• Utilize AUTOCAD and other design software to create detailed drawings and schematics for renovations, maintenance projects and new installations
• Assist in conceptualizing and drafting layouts for MEPS and HVAC systems that meet operational requirements and safety standards

Operational Support

• Evaluate equipment and system performance through detailed analysis
• Develop and update preventive maintenance schedules based on design specifications to enhance equipment reliability and lifespan
• Participate in evaluating team performance, providing constructive feedback and conducting regular training sessions to enhance skills
• Assist in developing and implementing emergency response plans related to engineering systems, including fire safety and disaster recovery protocols
• Maintain accurate records of maintenance activities, project progress and inventory of parts and supplies

We are looking for someone who:

• Experience in Project Management, Engineering Operations or a Similar Role Within the Hospitality Industry
• At least 3 years of relevant experience
• Strong leadership and interpersonal skills to effectively motivate and develop a diverse team
• Ability to perform under pressure and adeptly handle last-minute changes or requests

If you are the right person, what are you waiting for? Click the apply button now!

About the Role:

The Building Automation System Engineer shall possess a diploma in Building, Facilities, Engineering or relevant disciplines from a recognised establishment with a minimum 3 years of relevant working experience in Building Maintenance System. The Building Automation System Engineer shall be familiar with the Building Maintenance System (BMS) and have good knowledge in building M&E system.

The responsibilities of the Building Automation Engineer shall include but not limited to the following:

1) On daily basis, follow up on anomalies or faults detected from the use of the Building Maintenance System to optimize the building equipment;

2) Deep dive into building function and equipment to improve energy efficiencies and eliminate intermittent faults, derive new fault rules specific and relevant to the Sites; and

3) Manage, operate, configure, modify and perform troubleshooting on the Building Maintenance System

About You:

1) Possess a recognized diploma in any discipline of building, facilities, or engineering (with M&E background preferred) related discipline from a recognized establishment with a minimum of 5 years of relevant working experiences in facility management works

2) Trained in Building Management System

3) Fluent with Microsoft Office

Why join Cushman & Wakefield?

As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from;

• Being part of a growing global company;
• Career development and a promote from within culture;
• An organisation committed to Diversity and Inclusion

We're committed to providing work-life balance for our people in an inclusive, rewarding environment.

We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program.

We have a vision of the future, where people simply belong.

That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, gender, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us.

Job Description

• 5 years relevant working experience in Water Treatment industries is preferable.

• Experienced in the design of water treatment plants (desalination, potable water, demineralization) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.), experience in Demineralization System will be added advantage.

• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/EDI), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager & Lead Engineer, Process on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S and Drafting) on development of engineering deliverable on a timely basis.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

Requirement:

• Degree in Chemical Engineering or Environmental.

• Prior experience of at least 5 years in process design. Experience in UltraPure Water (UPW) will be added advantage.

• Ability to establish and maintain appropriate relationships with team members.

• Able to work independently with minimal supervision

Overall responsibility

- Product documentation and presentation to peers and customers

- Cold call & follow up project list & sales funnel

- Assist manager to check new tenders, following up with customers to submit tenders

- Assist manager of new product and present/demo required products to customers

- Assist manager to send quotation and following up with customer to close the sales

Consults with

- Directors

- Administrator

- Manager/Engineers of Principals

Capabilities

- Communicates effectively,

- Resourceful,

- Can work independently,

- Desire to upgrade technical and interpersonal skills

- Prompt customer response

- Basic knowledge of PC, Windows & Microsoft Office

- Good technical troubleshooting skill

Join Our Dynamic Team!

Are you a skilled and motivated individual with a passion for problem-solving? We are currently seeking a talented Field Application Engineer to join our growing team. This is an exciting opportunity to contribute to cutting-edge turnkey projects and work in a dynamic environment.

Key Responsibilities:

• Provide technical expertise on site to troubleshoot and propose the best solution for our clients
• Conduct preventive maintenance to ensure optimal performance of equipment.
• Propose and recommend improvement projects to clients to upgrade existing equipment performance.
• Attend to site installation, equipment breakdown and servicing, and emergency requests from client
• Collaborate with cross-functional teams to deliver exceptional after-sales support to our clients
• Utilize your technical know-how to identify, diagnose and repair complex issues efficiently.
• Other ad-hoc duties

Qualifications:

• Must possess a minimum Diploma in Engineering (Mechanical / Electrical / Automation) or equivalent.
• Minimum 3 years relevant experience required and knowledge related to electromechanical control & automation.
• Programming skills and understanding in PLC & Robotic Control.
• Strong analytical and problem-solving skills.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Travel, often on short notice, to customer sites to resolve problems or support other team members.
• With class 3 driving license.
• Regional travel experience.

No experience/Diploma in precision/mechanical/mechatronic/electrical/electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2600, after 3 months $2700

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

• Install, configure, and maintain Windows 10 and 11 operating systems in the IT system implementation projects;
• Manage IT operations including managing servers, active directory, backups, virtualization, storage and other infrastructure related tools;
• Diagnose, troubleshoot, and resolve hardware and software issues related to servers;
• Collaborate with cross-functional teams to deploy software applications, updates, and patches across the server environment;
• Implement and manage security measures, including antivirus software, firewalls, and encryption, to safeguard against potential threats and vulnerabilities;
• Monitor and optimize system performance, ensuring efficient utilization of the servers and responsiveness of user applications;
• Provide technical support and guidance to end users, addressing inquiries, resolving problems, and offering training as needed;
• Performing on-site for system troubleshooting to support users facing issues on both Windows and Linux systems;
• Create and maintain documentation related to system configurations, processes, and troubleshooting procedures;
• Understanding the customers system architecture and design to better support future enhancement in server system usage;
• Deploy endpoint protection and ensure firewalls are configured properly on both Windows and Linux systems;
• Manage and follow up with IT vendors on IT service level delivery and server issue;
• Collaborate with various IT vendors on project implementation.

Job Requirements:

• Diploma or Degree in Computer Science, Information Technology, or Engineering;
• At least 2 years of experience as a System Engineer or similar role, with a focus Windows 10 and 11 operating system;
• Strong knowledge of desktop hardware components, peripherals, and their configuration;
• Experience as a System administrator, provide support, troubleshoot and maintain computer servers and networks;
• Good technical skill in LAN/WAN, configuration and troubleshooting server, storage and tape library hardware knowledge;
• Proficiency in diagnosing and resolving technical issues related to window server computing;
• Familiarity with software deployment tools and methodologies;
• Experience with Active Directory, Group Policy, and system security configurations;
• Excellent communication and interpersonal skills, with the ability to explain technical concepts to non-technical users;
• Possesses strong problem-solving and analytical skills with ability to work independently and collaboratively in a team environment;
• Able to work within tight timelines with good prioritization skills
• Knowledge in networking technologies encompassing Fortinet, Sophos and Cisco switch, router, and firewalls.

No experience/Diploma in mechanical/mechatronic/electrical/electronic or related engineering

MOE Grant can apply

SPM can apply

Basic (no experiene / fresh)-start from $2400-$3300

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Description:

• Responsible for planning, implementing and overseeing safety-related issues at site
• Ensure all works adhere to safety rules and safe work practices as well as safety legislation
• Liaise with different departments on all safety and health matters
• Identify any situation that is potentially unsafe and/or hazardous in nature, feedback to Manager and team, investigate and recommend any corrective actions
• Oversee and direct the entire process of safety analysis including any accident investigation
• Responsible for keeping records of safety-related matters and recommendation/administration of corrective measures at the site
• Assist the Manager to perform evaluation of safety policies, methods, and programs
• Organizes safety training for employees

Requirements:

• Holding Certificate in WSH Coordinator Course/ Building Construction Supervisors Safety Course and/or any Relevant Safety Certificates from any approved institutions will be preferred.
• At least 3 years of relevant working experience
• Good interpersonal skills.
• Ability to work under pressure in a fast paced environment
• Location: Lentor
• 6 days work week

Job Description & Requirements

Job Description:

• To work and co-ordinate with design/construction teams for all M&E installation and system requirement matters.
• To co-ordinate with Civil/BIM teams & all SWC for station and viaduct CCSM/SEM drawings and submissions.
• Review project specifications, technical clarifications and construction drawings.
• Manage in-house M&E sub-contractors’ work to ensure shop drawing and services are well co-ordinated to suit sequence and installation.
• Supervise and lead an installation team on M&E services installation in construction environment.
• Any other duties as assigned.

Job Requirement:

• Candidate must possess Bachelor Degree or Diploma in relevant discipline.
• Minimum 5 years of experience in construction/ civil engineering industry.
• Able to read and understand CAD, Revit/Navisworks software services in 3D model is essential.
• Have experiences in working in large scale projects.
• Candidate with LTA- MRT experience advantage.
• To be based in project site office.
• 6 Working Days per week.
• Working Location: Tampines.

Job Descriptions

• Actively conduct risk assessments at project site and recommend measures to minimize and eliminate possible risks to any person.
• Work closely with different teams to implement and maintain a strong safety regime on site.
• Conduct toolbox meeting and ensure the permit to work system in place.
• Work closely with different teams to implement and maintain a strong safety regime on site.vironment and practice of Company's QEHS Management System/WSH Act/Occupational safety and health at all times.
• Reporting to the WSH Manager, you will liaise closely with Project Managers on workplace safety, health and environmental issues to maintain a high level of safety at the sites.
• Ability to lead and advise on safety programs.
• Involve in GGBS, OHSAS 18001 & ISO 9001; 14001 implementations and audits.
• Review and maintain site's WSH records.
• Other duties as assigned by superior.

Job Requirements

• Specialist Diploma in WSHe and/or any Relevant Safety Certificates from any approved institutions will be preferred.
• With at least 6 years of working experiences in the construction industry.
• LTA- MRT working experience would be an added advantage.
• 6 Working Days per week.
• Good interpersonal skills.
• Ability to work under pressures in a fast pace environment.
• Working Location: Site Office, Tampines.

Job Description:

• Ensure all architectural works are carried out as per approved architectural drawings and specifications and all interface details with SWCs works are carried out as per CCSM and Reflected Ceiling Plans.
• Plan, manage and maintain the BIM data in compliance with project requirements
• Create and maintain the project template files to ensure standards
• Coordinate with other departments and engineers to manage and resolve clashes
• Liaise with sub-contractors
• Prepare Transmittal on drawings for submission or issuance to sub-contractors
• Review and revise the current revision status
• Compiling of As-built drawing upon project completion
• Minor coordination of Architectural / Structural / M&E drawings
• Detailing and documentation of working drawing
• Check on-site to ensure that architectural works are carried out according to the construction drawings
• Any other duties assigned

Job Requirement:

• Minimum 3 years of experience after tertiary education in a relevant architectural field in the construction supervision of architectural works for projects of similar scale and complexity in context.
• Having experience in the LTA Project would be a bonus and advantageous.
• Willing to work in the site office.
• Willing to work 6 days work week

Job Description:

• Ensure all architectural works are carried out as per approved architectural drawings and specifications and all interface details with SWCs works are carried out as per CCSM and Reflected Ceiling Plans.
• Plan, manage and maintain the BIM data in compliance with project requirements
• Create and maintain the project template files to ensure standards
• Coordinate with other departments and engineers to manage and resolve clashes
• Liaise with sub-contractors
• Prepare Transmittal on drawings for submission or issuance to sub-contractors
• Review and revise the current revision status
• Compiling of As-built drawing upon project completion
• Minor coordination of Architectural / Structural / M&E drawings
• Detailing and documentation of working drawing
• Check on-site to ensure that architectural works are carried out according to the construction drawings
• Any other duties assigned

Job Requirement:

• Minimum 2 years of experience after tertiary education in a relevant architectural field in the construction supervision of architectural works for projects of similar scale and complexity in context.
• Having experience in the LTA Project would be a bonus and advantageous.
• Willing to work in the site office.
• Willing to work 6 days work week

Job Description:

• Ensure all architectural works are carried out as per approved architectural drawings and specifications and all interface details with SWCs works are carried out as per CCSM and Reflected Ceiling Plans.
• Plan, manage and maintain the BIM data in compliance with project requirements
• Create and maintain the project template files to ensure standards
• Coordinate with other departments and engineers to manage and resolve clashes
• Liaise with sub-contractors
• Prepare Transmittal on drawings for submission or issuance to sub-contractors
• Review and revise the current revision status
• Compiling of As-built drawing upon project completion
• Minor coordination of Architectural / Structural / M&E drawings
• Detailing and documentation of working drawing
• Check on-site to ensure that architectural works are carried out according to the construction drawings
• Any other duties assigned

Job Requirement:

• Minimum 3 years of experience after tertiary education in a relevant architectural field in the construction supervision of architectural works for projects of similar scale and complexity in context.
• Having experience in the LTA Project would be a bonus and advantageous.
• Willing to work in the site office.
• Willing to work 6 days work week

Job Description:

• To manage and negotiate pricing, commercial terms with local and overseas suppliers and recommend the most competitive suppliers and subcon.
• Ensure continuous supply of required goods and materials and communicate any supply problems which may pose a risk or impact on business operations.
• Negotiate contracts, improved prices and terms of business with suppliers and review opportunities to make business savings utilising negotiation and procurement best practice tools and methods.
• Review specifications and ensure materials ordered meet proper quality standard and comply to contract specifications.
• Manage and track Purchase Requisition/Purchase Order on the internal system to make sure the procurement projects are delivered on time.
• Maintain and update list of approved suppliers and their qualifications, delivery times, and potential future development
• Keep relevant stakeholders informed on the latest progress/status of delivery within expected timelines.
• Perform other duties as assigned.

Job Requirement:

• Candidate must possess Diploma in relevant discipline.
• Minimum 3 year of experience in procurement preferably in construction/ civil engineering industry.
• Experienced with sourcing and material understanding.
• Have experiences in working in large scale projects.
• Working Location: Site Office, King Albert.
• 5.5 Days Work Week.

• To handle the full spectrum of project management
• To lead a site Management team to complete the project on time and within budget
• To inspire and motivate the site team to work effectively and efficiently
• To enforce appropriate measures so as to comply with the required standard of safety in execution of tasks.
• To drive high productivity on site using relevant cost saving methods at all times.
• To ensure that the documented Quality and workplace health and safety (WHS) policies are effectively implemented, maintained and reviewed.
• To ensure the Project Quality and WHS objectives are being met and any discrepancies are being addressed immediately.
• To ensure that the overall phases of the project is effectively coordinated and organized.
• To liaison with the client, consultant, suppliers (sub-contractors) and other relevant authorities on management issues pertaining to the project.

Requirements:

• Degree / Diploma in relevant Engineering discipline.
• Must have at least 5 years of post-graduate experience in project management
• Ability to handle Projects independently.
• Ability to display initiative in execution of tasks and being pro-active in the delivery of tasks
• Dealing professionally in managing tasks and consistently meet tight deadlines
• Attention to details and good problem solving skills