• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Planning, coordination, and execution of substation automation projects.

Design, costing and integration of substation automation systems according to project requirements.

Installation, testing and troubleshooting of substation automation systems at site.

Preparation of project documents and drawings.

Requirements:

Diploma in Electrical Engineering/Computer Engineering

Knowledge of data communication and Automation Systems for Electrical Network

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

JOB RESPONSIBILITIES

• Perform basic drafting

• Prepare design drawings / calculations / schematic diagrams / reports for;

o Mechanical ventilation system

o Fire protection system

• Perform prescriptive / performance-based submissions to Fire Safety Department (FSD)

• Attend meetings with clients, consultants, inspectors and authorities

• Perform basic report writing (optional)

• Perform CFD simulations (optional)

• Perform occupants evacuation simulations (optional)

REQUIREMENTS

• Basic numerical and communication skills (written and verbal)

• Able to work in teams

• Attention to detail and iterations

• Candidate is expected to be autonomous under supervision and guidance

• Basic familiarity with Fire Code 2018, local code of practices and standards

• Familiarity with software (Mandatory)

o CAD

o Microsoft Word

o Microsoft Excel

o Microsoft Powerpoint

• Familiarity with software (Optional as training will be provided)

o Corenet

o Pyrosim

o Fire Dynamic Simulator

o Pathfinder

ACADEMIC QUALIFICATIONS

• Minimum B.Eng. (Mechanical) from a recognised institution.

Responsibilities

• Preparation of tender and contract documents including BQ
• Prepare and analyze costing for tenders
• Cost planning, estimation and measurement of quantities
• Assist in preparation of budget for M&E works
• Update M&E drawing
• Design drawing, design calculation
• Sourcing for sub-contractors and suppliers and price negotiation
• Support and tender multiple M&E projects concurrently
• Lead pre-tender meetings and brief team members’ duties during estimate preparation and submission stage
• Ensure tenders are well documented in a timely manner
• Coordinate with client and internal departments
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Mechanical Engineering (ACMV, Fire Protection) or related field
• Minimum 2 years of experience
• Familiar with tendering, project cost control in M&E works
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

We are seeking highly skilled Commissioning, Qualification, and Validation (CQV) Engineers to provide risk-based CQV services for pharmaceutical and biopharmaceutical clients. This role offers opportunities to work across various areas, including process equipment, CIP/SIP (Clean-In-Place/Sterilize-In-Place), and process manufacturing systems, with a focus on maintaining compliance with regulatory standards.

Key Focus Areas:

1. CQV for Facilities, HVAC, and Equipment
2. CQV for Cleaning Validation

Responsibilities:

• Develop risk assessments, system impact assessments, protocols, and reports to support qualification and validation requirements, in line with regulatory standards and industry best practices.
• Create validation protocols using a science and risk-based approach to ensure compliance with regulatory requirements.
• Review, analyze, interpret, and summarize system and process performance data from executed activities for reporting and presentations to management.
• Investigate deviations, prepare detailed investigation reports, and create summary reports to ensure clear documentation of issues and their resolutions.
• Apply good judgment within defined practices and policies to select appropriate methods and techniques for obtaining solutions.
• Author or support the creation of test scripts for commissioning and qualification (CQ) of facilities, HVAC systems, manufacturing or analytical equipment.
• Conduct cleaning validation studies to ensure processes meet stringent regulatory requirements.
• Author or execute test scripts for DeltaV batch recipe testing, ensuring seamless integration with production processes.
• Draft DeltaV batch recipes, ensuring alignment with manufacturing specifications and process requirements.

Requirements:

• Experience with pharmaceutical and biopharmaceutical processes, including commissioning, qualification, and validation.
• Knowledge of DeltaV batch processes and recipe creation/testing is highly desirable.
• Proven expertise in facilities, HVAC, equipment, or cleaning validation is required for the respective roles.
• Strong analytical and problem-solving skills with a good understanding of industry regulations and standards.
• Experience with risk-based validation approaches and developing protocols in compliance with regulatory requirements.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

Job Responsibility:

• Strong knowledge of cryptographic concepts, Hardware Security Module's, and key management.
• Hands-on experience in implementing and operating Thales SafeNet HSMs.
• Hands-on experience in designing and implementing key management solutions for enterprises.
• Knowledge of networking and network security concepts.
• Experience working on PKI / key management solutions.
• Programming knowledge in C / C++ (preferred), Java, .NET.
• Experience integrating cryptographic libraries and HSMs with applications.
• Understanding of Information Security Architecture and ecosystem technologies and concepts required like firewalls, monitoring tools, encryption, web proxies, and identity & access management.

Qualifications

• Bachelor's degree in Computer Science, Cybersecurity, or a related field.
• Experience with Thales HSM or similar cryptographic solutions.
• Strong understanding of cryptographic algorithms and protocols.
• Familiarity with compliance standards (e.g., PCI-DSS, GDPR).
• Excellent problem-solving skills and attention to detail.

Interested applicants please send your resume to [email protected]

Venessa Goh Wee Ni

R24124686

Recruit Express Pte Ltd

EA License No: 99C4599

RCB No.: 199601303W

We regret that only shortlisted candidates will be contacted.

• Machine design in Electrical aspect
• Perform single line drawing
• BOM & machine manual writing
• Conduct machine acceptance with customer
• Coordination with sub-contractors for machine build
• Posses strong leadership quality and be self-motivated
• Experience in Machine AC & DC (Control) design
• Good knowledge and experience in machine automation
• Degree / Diploma in Electrical Engineering
• Fresh graduates are welcome to apply

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a QA Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Details:

Our client is a significant player in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised telecommunication system integrator in the oil and gas global market, they provide turnkey project systems that cover a full spectrum of services in the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, and various telecommunication system drawings.

Salary: $3800 - $5500

Job Description:

1️⃣ Lead engineering design, ensure thorough understanding of client requirements to propose optimal solutions

2️⃣ Prepare engineering documents (VDRL) and address client feedback promptly with high quality and accuracy

3️⃣ Create preliminary drawings and guide AutoCAD drafters in producing engineering deliverables

4️⃣ Incorporate industry standards and best practices into design, drawing preparation, review, and submission

5️⃣ Supervise equipment assembly, cabinet integration, system configuration, simulation, testing, and verification

6️⃣ Provide in-house training for client and commissioning engineers

Requirements:

1️⃣ Minimum Diploma in Engineering (Electronics, Electrical, Mechanic, Marine & Offshore) or possesses technical knowledge about Maritime communication systems

2️⃣ Experience in a similar role within the industrial markets

3️⃣ Experience as an ex-sailor, Ex-Radio Officer, or Ex-Navy personnel are added advantage

4️⃣ Well-organised documentation and time management skills

5️⃣ Ability to articulate and share concepts with customers and suppliers

6️⃣ Knowledge of AUTOCAD will be an added advantage

7️⃣ Site commissioning/radio surveying experience as per SOLAS / MODU (Not a must-have but good to have)

8️⃣ Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, and iBwave for UHF/GSM coverage (Not a must-have but good to have)

⭕️ Please send your updated resume to: berrylim(at)rapidrecruitmentasia.com

For quicker response, please contact me (Berry) directly at:
Telegram: (at)Berryseisei or HP: (at)+65 92472216

Rapid Recruitment Asia Pte Ltd (16C8261)
Berry Lim (R23117685)

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

This position is for FULL TIME morning/afternoon shifts, and will require some weekend shifts for maintenance and support activities. Work is non-routine and complex, involving the application of advanced technical/business skills in area of specialization. Provide direction and mentoring to others.

As a Principal Site Reliability Engineer, you will be part of the DevSecOps culture who will combine software and systems engineering to build, package, release and integrate tools and applications that will strengthen and innovate in the Cloud space within the Oracle SaaS-at-Customer and OCI DRCC infrastructure.

Responsibilities:

• Team members will engage in operational activities including monitoring, installation, patching, and upgrading of Oracle Fusion Middleware, Fusion Applications, and Oracle database implementations.
• Work on the SaaS Engineering Operations team with full stack deployment and support responsibilities.
• Address extremely complex, critical customer system issues on a routine basis and document technical solutions.
• Work directly with customers, product development, and product support to resolve critical customer application or performance issues in a timely basis.
• Understand the end-to-end configuration, technical dependencies, and overall behavioral characteristics of production services.
• Authority for end-to-end performance and operability.
• Perform frequent planned DR switchovers.
• Utilize a deep understanding of service topology and their dependencies required to troubleshoot issues and define mitigations.
• Collaborate with team members to improve the team's engineering tools, systems, procedures, and security.
• Lead implementation of tools and processes using DevSecOps methodologies to innovate, design, develop, secure, build, release and support fully automated CI/CD pipelines for the development and maintenance of Cloud Infrastructure Services and relevant applications.
• Manage and operate the infrastructure and configuration of microservices with a focus on end-to-end automation and infrastructure as code.
• Perform code development, OCI DRCC region builds, monthly release deployments, operations engineering, and promotion to testing and production environments to support Sprint activities.
• Participate in developing, implementing, and enforcing policies to enhance cloud system security.
• Recommend technical policies and consult with development teams on remediation.
• Collaborate with team members to improve the team's engineering tools, systems, procedures, and security.
• Apply DevSecOps methodologies in assisting to determine the direction of current and future development projects.
• Evangelize security and application solutions and controls by creating and communicating presentations both internally and externally.
• Demonstrate flexibility and resilience in response to changing or ambiguous situations.
• Work across development and operational environments.
• Stay abreast of software testing technologies and best practices.

Minimum Required Experience

• Relevant experience to functional area with around 10 years of experience (7+ years of software engineering and at least 3 years of DevSecOps culture)
• Extensive experience with Oracle RDBMS, Real Application Cluster (RAC), Disaster recovery, WebLogic, Identity Management, Apache/HTTP, Apex and Fusion Middleware and/or other Oracle technologies.
• Experience with cloud solutions and security engineering/design experience on one of the major cloud platforms AWS, GCP, Azure, OCI (preferred).
• Extensive experience in using Terraform for orchestrating application resources and infrastructure in CI/CD platform.
• Extensive experience in DevSecOps culture.
• Extensive experience with scripting and coding languages like shell scripting (must), Python (must), Ruby (plus), Go (plus) but not limited to.
• Experience developing cloud native CI/CD workflows and tools such as Chef, Puppet, Jenkins, Ansible, Rundeck and Git.
• Experience with Release Management cycles and Git.
• Knowledge of storage (ZFS preferred), IP networking, VPN's, DNS, load balancing and firewall (F5).
• Experience with one or more of the following required (Docker, Kubernetes, Terraform, Kafka, Microservices, Machine Learning, Artificial Intelligence)
• Experience with full software development lifecycle and delivery using Agile practices.
• Extensive background in cloud applications, cloud platforms and/or experience providing cloud infrastructure platforms in complex environments.
• Highly self-motivated with the ability to work both independently and with members of a global team without close supervision.

Job Descriptions:

• Technical window for new product development.
• Involvement in developing the methodology for implementation of new and improved processes.
• Perform hands-on testing such as setting up the presses, moulds, process development and other engineering activities.
• Develop and document moulding processes, ensuring they meet all technical and quality standards, including DOE and process window study.
• Utilize scientific moulding principles to analyse and troubleshoot process issues, implementing corrective actions to improve efficiency and product quality.
• Preparation of process-related technical documentation, like FMEA, validation protocol, engineering report, evaluation processing parameters and data.
• Trial new tooling and equipment and make modifications as needed to meet quality and production goals.
• Liaison with customer engineering teams, incorporate customer engineering concepts, and ideas into feasible designs to fit facility/company manufacturing process.
• Use creative skills to assist in solving design or manufacturing issues or constraints.
• Provide primary tooling component and packaging cost input for quotation of new business.
• Work closely with the internal engineering team and outside vendors in tooling, equipment, component and material development.
• Work closely with customers on product, project or system development issues.
• Keep up on the latest industry standards, processes and procedures.
• Participate in formal improvement team activities.
• Support all development and initiate improvements to achieve business objectives.
• Travel to other sites and customer sites to perform testing onsite and knowledge transfer when required.
• Other tasks as assigned by supervisors/managers.

Requirements:

• Diploma/Degree in Mechanical Engineering/relevant field
• Strong mechanical aptitude and problem-solving skills.
• 5 years of hands-on working experience and process DOE will be a plus.
• Experience in the Medical Device Manufacturing industry.
• Experience in LSR will be a plus.
• Experience in Minitab software will be a plus.
• ISO9001 and ISO13485 awareness certification will be a plus.
• Good communication skills.
• Lead the technical team and provide training where required.
• Able to liaise with customers and interact with relevant persons in technical discussions.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

About iNova

iNova is a different kind of health company. We are leading the way to better health by delivering innovative, patient-centric products that improve the lives of people around the world. Our diverse portfolio of iconic, market-leading consumer health brands and prescription medicines are backed by science and distributed in over 75 markets across Asia, Australia, New Zealand, Middle East & Africa and Europe. Experience the iNova difference today.

The Opportunity

We currently have an opportunity for a Data Engineer - Snowflake to based in Philippines or Singapore, to join our Group Technology Team.

Reporting to the Head of IT Strategy, Architecture & Governance, the Data Engineer will be primarily responsible for designing, developing, and optimizing data warehouse solutions with Snowflake. Secondarily, this role will involve supporting the integration of ETL processes using Microsoft tools (Azure Data Factory, LogicApps etc.) into the Snowflake ecosystem.

Knowledge of data visualization through Power BI would also be desirable to ensure provision of available, reliable, and structured datasets from Snowflake for both reporting and analysis purposes.

This role requires extensive knowledge of data engineering processes, data modelling, data warehousing, and business intelligence best practices. A successful candidate will be able to transform complex business needs into efficient, scalable, and secure data pipelines solutions.

Key Responsibilities

Primary - Data Warehouse Development and Management:

• Design and manage data warehouse solutions in Snowflake, ensuring data integrity, optimization, and security.
• Maintain and improve the performance of the data warehouse to meet the reporting and analytical needs of the business.
• Ensure Snowflake environment is optimized to integrate with upstream data-sources.
• Support Data Governance and Quality within the Snowflake environment.

Secondary - Data Integration / ETL and Visualization Support:

• Collaborate with internal and external integration specialists to identify data requirements and co-design data integration solutions.
• Consume output datasets from various internal and external sources into Snowflake as processed using Microsoft tools such as Azure Data Factory and LogicApps.
• Familiarity with other ETL tools such as Alteryx would also be beneficial.
• Ensure that Power BI reports deliver accurate, real-time data insights through providing appropriate reporting datasets.

Collaboration with Business and IT Teams:

• Work closely with business units including finance, marketing, supply chain, and sales to gather reporting requirements and translate them into technical solutions.
• Liaise with data governance teams to ensure adherence to best practices in data management and security.

Documentation and Compliance:

• Maintain documentation for all data pipelines, transformations, and visualizations, ensuring clarity and consistency for both technical teams and end-users.
• Ensure adherence to corporate policies and industry standards related to data security and compliance.
• Previous experience with CSV and GxP requirements would be a plus.

About You

To be successful in this role, you will possess a Bachelor’s degree in Computer Science, Information Technology, or a related discipline, with a minimum of 5 years hands-on experience in data engineering, with a focus on building and managing data warehouses in Snowflake.

Other key requirements for this role include:

• Snowflake Certification (SnowPro Core and/or other Advanced Certifications) a plus but not mandatory.
• Hand-on experience building data-pipelines in Snowflake with SQL and/or Python.
• Hands-on experience with Data Governance in Snowflake including compliance, security, privacy and access
• Ideally, experience with developing data-centric capabilities using Python in Snowpark and/or applications with StreamLit.
• Experience with ETL tools with a focus on Snowflake Integration, particularly within the Microsoft stack (Azure Data Factory & Logic Apps).
• Experience in building datasets to enable reports and dashboards using Power BI.
• Experience with data integration from cloud platforms and various APIs a plus.
• Effective Communication Skills (Written & Verbal).
• Personal accountability for outcomes and providing high-quality service to business users
• A strong work ethic and a well-organized self-starter.
• Optimistic “can do” personality.
• Be open to change and willing to learn new skills.
• An ability to follow up on pending issues and meet deadlines.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Technology Solutions Office is looking for Software Engineer

Internal Code: A25025

What will you do?

• Work with project leads, developers and operations on a live commercial project that has more than one million users on its platform.
• Software support and maintenance of deployed products and solutions
• Work closely with project management and experience design team to deliver project outcomes

• Strong hand-on experience in NodeJS Technologies
• Solid hand-on experience with AngularJS, ReactJS
• Knowledge of Object-Oriented Programming and SQL
• Experience with React Native, Microsoft SharePoint is a plus
• Proficient knowledge of languages such as .NET and/or Java will be a plus
• Ability to manage a hosting environment, including database administration as well as scaling applications to handle load changes
• Experienced in developing on Unix/Linux environments
• Effective communication skills & customer-oriented mindset
• Ability to work with a multiple team and stakeholders
• Enjoy constant learning and working with new technologies
• Excellent critical thinking and problem solving skills
• Experience in public sector projects is a plus
• Candidates who had previously managed small teams will be considered for the Senior/Lead positions
• Appointment will commensurate with experience and qualification.
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

☑ Basic $ 5500 - $ 6500

☑ MNC - High Variable Bonus.

☑ 5 Days (Mon – Fri: 8.00pm – 5.30pm)

☑ Multiple Location : Central or East Area

Job Description

• Develop and manage project schedules for building works, M&E, and Process Systems, from initial design through construction, installation, and final testing.
• Estimate the time and resources required for major construction activities.
• Prepare technical documentation for tender submissions.
• Participate in site planning, track work schedules, and monitor on-site progress.

Job Requirements:

• Diploma/Degree in Civil Engineering or related
• Min 3 years of experience in construction scheduling & building-related facilities.
• Proficiency in MS Project Planner, Primavera, or Synchro.

Interested applicants are welcome to apply or send your updated resume to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

Job ID: 19206

• Location: Mattar
• Working hours: 8.30am – 5.30pm
• Salary: up to $4,500 (Depending on experiences), Car allowances will be provided

Job Description

• Manage and oversee the entire sales cycle, including customer meetings, quotation submission, sales order processing, and delivery follow-up.
• Provide advanced technical solutions and support to customers.
• Prospect and develop new accounts while maintaining and expanding relationships with existing accounts.
• Develop and implement strategies to achieve the company’s overall sales and marketing objectives.
• Mentor and guide junior sales engineers, providing training and/or support as needed.
• Collaborate with cross-functional teams to ensure customer satisfaction and address any technical or logistical challenges.
• Analyze market trends and customer feedback to identify opportunities for product and service improvements.

Job Requirement

• Diploma or Degree in Mechanical, Mechatronics, Electrical, Electronics, or a related field.
• Possess own car
• Minimum of 5-7 years of sales experience, with a proven track record in a technical sales role
• Strong leadership qualities and experience in mentoring or leading a sales team.
• Aggressive, result-oriented, and self-motivated.
• Excellent interpersonal, presentation, and communication skills.
• Ability to work independently as well as part of a team.
• Ability to understand and communicate complex technical solutions.
• Proven ability to meet and exceed sales targets and goals.
• Strong problem-solving skills and the ability to handle challenging customer situations.
• Experience in a senior sales or sales engineering role within factory automation and/or semiconductor will be advantage.

Interested applicants, kindly send your updated resume to Joanne (R21101135) [email protected] with the email subject header "Job Application for 19206, Senior Sales Engineer".

Only shortlisted candidates will be notified, other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Pasona Singapore Pte Ltd

Joanne Yeo Min Qian
EA License No:90C4069

Registration No.: R21101135

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Field Service Engineer

Responsibilities:

• Responsible for the installation, commissioning, repairing and maintenance job of Company’s products and components at customers’ sites.
• Maintain work quality by providing efficient service and technical support to customers.
• Liaise with customers and internal team relating to technical and service issues.
• Ensure proper documentation and maintenance of service reports and other records.
• Support sales to get service orders.
• Provide product training to customers.
• Ensure that health and safety standards are followed.
• Any other ad-hoc duties as assigned by Service Manager.

Requirements:

• Minimum diploma or above in Electrical/Electronics/Mechanical/Mechatronics Engineering.
• Relevant working experience with electrical/mechanical repair will be an advantage.
• Effective communication skill, analytical and judgemental skills required.
• Self-starter and ability to manage, develop and execute plans and objectives in a timely and effective manner.
• High level of integrity, discipline and self-motivated.
• Able to work independently and in teams.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Senior Design Electrical Engineer

Job Responsibilities:

• Lead technical assignments for electrical hardware product design and development.
• Design, fabricate, modify, and evaluate electromechanical devices, components, or systems.
• Develop initial concepts and participate in detailed product design.
• Create original hardware, circuits, components, software, processes, and models.
• Participate in design reviews, providing DFM and DFA inputs.
• Prepare and release engineering drawings/schematics and communicate with vendors.
• ECO release of engineering documentation.
• Design AC/DC power distribution systems, PCBA, and components.
• Develop, test, and document designs.
• Estimate product/project requirements (power consumption, weight, size, schedule).
• Coordinate with manufacturing during pilot/production runs.
• Interface with customers to understand technical requirements.
• Troubleshoot electrical issues, including on-site support.
• Collaborate with cross-functional teams (Purchasing, Marketing, Service, QA).
• Assist engineering management in developing schedules and specifications.

Requirements:

• Bachelor's Degree + 6 years' experience / Master's Degree + 3 years' experience in Electrical/Electronics/Mechatronics Engineering
• Working knowledge of electrical systems (motion, temperature measurement, PID loops, safety interlock circuits)
• Experience with dynamic electromechanical system design
• Proficient in Orcad, Autocad, PCAD, Solidworks, or similar 3D CAD software
• Design knowledge of NFPA, Semi Safety Requirements, and Machine safety

Interested candidates who wish to apply for the advertised position, please click on “Apply”.

We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy