A & One Precision Engineering was founded in 1992 and established itself as one of the leaders in the global precision engineering industry. A & One has leading technological capabilities in advanced manufacturing and currently serves customers in the Semiconductor, Aerospace, Medical Technology, Energy, Consumer Electronics and Telecommunications Industries.
As a Design Engineer, your responsibilities are:

• Support NPI (New Product Introduction) on product design and development.
• Oversee the design and documentation of components made from precision machined parts and sheet metal.
• Employ Design for Six Sigma (DFSS) tools to enhance design manufacturability.
• Conduct impact analysis to refine designs, ensuring they meet specifications, project timelines, and cost objectives.
• Participate in technical discussions and present design solutions to clients.
• Coordinate the fabrication, assembly, and validation of prototypes to ensure they meet specifications.
• Prepare drawing proposal and tooling design.
• Conduct tooling buy-o7 and hands-on tooling setup.
• Initiate and conduct the improvement project evaluation.
• Liaise with customer on design requirement and alignment.
• Liaise with factory on capability compliance.
• Responsible on tooling expenses and cost control.

Requirements:

• Min. Diploma in Mechanical Engineering/ Mechatronics Engineering/ Precision Engineering.
• Proficient in using Solidworks and/or other 3D modelling software
• Proficient in using CAD/CAM Programming
• Preferably with working knowledge and experience in tool & die, jig & fixtures design.
• Familiarity with Geometric Dimensioning and Tolerancing (GD&T) and Tolerance Stack-up Analysis.

· To assist the Project Manager or Project Engineer in the daily execution of work;

· Inspecting construction sites regularly to identify and eliminate potential safety hazards;

· Enforcing site safety rules to minimize work-related accidents and injuries;

· To supervise the work of sub-contractors and in-house workers;

· To work closely with other site operations staff to meet the project schedule;

· Ensure installation is carried out as per construction drawings;

· To monitor the progress and quality of work being performed by workers;

· Ensure that works are executed within an acceptable standard of workmanship;

· Attend the daily tool-box meeting and convey clear instruction accordingly;

· Understand and ensure compliance in project requirement and scope of work.

Responsibilities:

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control

· Develop & review electrical related drawings, e.g. Single Line Diagram, MCC Schematic, Equipment layout, Cable ladder/tray routing layout

· Knowledge in Onshore/ Offshore standards (IEC, NEMA, IEEE & API)

· Prepare Electrical Load Analysis & List

· Familiar with Short-Circuit and Voltage Drop calculation

· Prepare & review Electrical MTO for projects

· Review Electrical equipment’s datasheet

· Strong knowledge in Low voltage MCC/Switchgear, UPS, VSD/VFD & Transformers

· Prepare specification for LV Switchgear, MCC, Transformers & VSD/VFD’s

• Reviewing of customers' specifications and drawings
• Define specifications and scope of work to contractors
• Execution of projects.
• Startup, testing, commissioning and troubleshooting of plants.
• Develop engineering capabilities and work with sales team on project proposal and bidding

Requirements:

• Degree in Electrical Engineering or equivalent recognized by Professional Engineers Board (PEB) Singapore
• Able to read & understand line diagram and generate Bill of Materials from single line diagram
• Knowledge on control, schematics, motor controls and materials take-off
• Proficient in AutoCAD, Microsoft Office
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / vision
• Able to communicate effectively in English at all levels, both verbally and in written reports

An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate. We regret only shortlisted candidate will be notified.

You will be working as data engineer with a large global bank, you will be playing key role in building complex data solution

Job Responsibilities:

• Performing data analysis and data mapping

- Develop data pipelines to be used by BI or AI team

- Ensure data integrity and data quality

- carrying out development using python, Scala and Databricks

- Carrying out development of back end solution on structured and unstructured data

Job Requirements:

• Bachelor’s degree in Information Technology, Computer Science, Manage Information Science, or Analytics

• Min. 3 years of experience working as backend developer using python, pysparks

• Good experience working in big data platforms (Hadoop) and data lakes

• Good experience working with both structured and unstructured data.

• Experience working with databricks, enterprise datawarehouse, Spark streaming

• Good experience in performance optimization

• Experience in data management, data modelling, data warehousing, data mart, data visualization, design and implementation

Interested candidates please email your latest resume to [email protected]

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

· Manage and grow customer base on the assigned product range.

· Prospecting sales visits and regular follow-ups to customer relationship

· Offer commercial and technical proposals or quotations according to technical specifications and customer requirements

· Tender preparation, sales presentations, conversion of prospects to customers and after-sales service

· Gather regional market and competitor information (technical, prices and product development), ensure meeting pre-determined targets.

· Formulation and execution of market growth strategies for tasked Segment and territories

· Collaborate and work with other department/ regional offices to maximise growth and orders

· Prepare and deliver technical presentations and demonstrations to clients

· Collaborate with the engineering and product development teams to understand product specifications and capabilities.

· Oversee and coordinate the installation and implementation of products and systems.

· Ensure projects are completed on time, within scope, and within budget.

· Prepare and present sales proposals, contracts, and agreements.

· Track and report on sales performance and progress against targets.

· Maintain accurate records of customer interactions and transactions.

· Provide post-sales support to ensure customer satisfaction and repeat business.

· Address customer inquiries and resolve issues in a timely and effective manner.

· Gather customer feedback and work with internal teams to improve products and services.

· Traveling within the designated region to meet clients and manage projects as require.

· Participate in industry conferences, trade shows, and networking events to promote the company and its products.

Requirements:

· Diploma in Marine/Mechanical/Electrical/electronic/Engine

· Possess good sales and customer service knowledge

· 7-10 years of sales experience in marine diesel engine or marine equipment related experience.

· Self- motivated, independent and sales driven to develop and increase revenue

· Strong learning curves in upgrading technical knowledge

. Excellent presentation and negotiation skills

· Regional travelling is required

· Good oral and written communication skills in English and Chinese

. ⁠Other assigned duties

For more information, please reach us at [email protected]

*Only shortlisted candidates would be notified*

POSITION OVERVIEW:

We are seeking a skilled Senior or IT Support Specialist with a strong background in IT Infrastructure / network support with hands-on experience to join the Samsung Research Centre Singapore team. The ideal candidate will play a key role in maintaining and enhancing our IT infrastructure, include offices and data network/center by providing exceptional support to end-users, and ensuring optimal network performance within regional offices.

JOB RESPONSIBILITIES:

• Identify and resolve hardware and software issues for end-users, both onsite and remote.
• Collaborate with other IT teams within the organization (Infra, Network and App) to address and resolve technical issues.
• Deploy laptops to new and existing users ensuring consistency, security, and compliance with organizational standards.
• Design and implement efficient processes for onboarding new employees, including laptop setup, account provisioning, and orientation on IT policies.
• Streamline and execute offboarding procedures, ensuring secure data removal, account deactivation, and retrieval of IT assets.
• Ability to analyze issues related to Microsoft Office applications.
• Troubleshoot Wi-Fi or Network related issues.
• Diagnose and resolve printer-related issues, including hardware malfunctions, connectivity problems, and print queue management.
• Act as a point of contact for escalated customer inquiries, maintaining a professional and customer-focused approach.
• Gather feedback from users to identify areas for improvement and implement solutions to enhance the overall user experience.
• Conduct user training sessions to promote self-service options and empower users to resolve common issues independently.
• Maintain accurate records of support activities, including incident reports, service requests, and resolutions.

QUALIFICATIONS & REQUIRED SKILLS:

• At least a Diploma or Bachelor’s Degree in Information Technology, Computer Science, or equivalent.
• Excellent knowledge of desktop operating systems, hardware, and software applications.
• Excellent troubleshooting and problem-solving skills.
• Effective communication and interpersonal skills.
• Solid understanding of ITIL framework and best practices for IT service management

• Assist Project Manager in execution of Project Management, Project Schedule, and Coordination with sub-contractors

• Plan, implement, and monitor work schedules

• Liaise with main-contractor on site requirements

• Supervise sub-contractors, vendors on maintenance, site testing and commissioning activities and ensure quality standard

• Take immediate corrective action to avoid any cumulative effect of such deviation and recover the delay to finish the tasks in time

• Ensure project delivery according to dateline given, ensure cost control and profitability of project

• Order material and equipment from vendors

• Support site documentation requirements

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Duties & Responsibilities

• To lead the Engineer team to carry out civil and structural engineering jobs in front end engineering design, detail engineering design.

• To assist discipline Manager in project civil portion manpower.

• To generate project specifications, design philosophy, calculation template to comply with clients’ requirement and local authority’s requirements.

• Civil project team manhour control, schedule control.

• To prepare foundation, structural or hydraulic calculation sheets, from simple to more complicated items, in accordance to project specifications, criteria and information. Ensuring correct and accurate calculations of loads and member sizes of structures. On average, a Civil Engineer II produces three simple foundation calculation designs a day or 1 structural calculation report a week.

• To prepare three-dimensional (3D) models and design drawings for structures and foundations as well as shop fabrication drawings.

• To supply design drawing information and instructions to Designers ensuring technical completeness and clearness of data for effective workflow.

• Usually prepares anchor bolt list and setting bolt list for client’s procurement purposes ensuring at least (+)/(-) 10% safety factor and meeting client requirements.

• Checks own design outputs and reviews design drawings to ensure accuracy and completeness to design requirements and concepts.

• May act as Assistant Key Person for small projects or NIDC projects.

• Coordinates with other Engineers and Designers to facilitate production of civil design and drawing outputs.

• Performs other functions that may be assigned by the Department Manager. Requirements

• Bachelor’s degree in Civil Engineering.

• Minimum of ten (10) years in the field of years plant engineering design and construction experience in Oil & Gas, Refinery, Petrochemical, Chemical, Pharmaceutical and industrial plants and consistent career experience in the engineering department Skill Requirements

• Ability to use computer equipment and peripherals to carry out routine computing tasks.

• Basic knowledge on STAAD, AutoCad and Micro station.

• Possess good communication and technical skills.

• Strong leadership qualities and analytical and reasoning abilities.

• Ability to read, analyzes, and interprets common technical information, contract reports and instructions.

JOB RESPONSIBILITIES

• Perform basic drafting

• Prepare design drawings / calculations / schematic diagrams / reports for;

o Mechanical ventilation system

o Fire protection system

• Perform prescriptive / performance-based submissions to Fire Safety Department (FSD)

• Attend meetings with clients, consultants, inspectors and authorities

• Perform basic report writing (optional)

• Perform CFD simulations (optional)

• Perform occupants evacuation simulations (optional)

REQUIREMENTS

• Basic numerical and communication skills (written and verbal)

• Able to work in teams

• Attention to detail and iterations

• Candidate is expected to be autonomous under supervision and guidance

• Basic familiarity with Fire Code 2018, local code of practices and standards

• Familiarity with software (Mandatory)

o CAD

o Microsoft Word

o Microsoft Excel

o Microsoft Powerpoint

• Familiarity with software (Optional as training will be provided)

o Corenet

o Pyrosim

o Fire Dynamic Simulator

o Pathfinder

ACADEMIC QUALIFICATIONS

• Minimum B.Eng. (Mechanical) from a recognised institution.

Responsibilities

• Preparation of tender and contract documents including BQ
• Prepare and analyze costing for tenders
• Cost planning, estimation and measurement of quantities
• Assist in preparation of budget for M&E works
• Update M&E drawing
• Design drawing, design calculation
• Sourcing for sub-contractors and suppliers and price negotiation
• Support and tender multiple M&E projects concurrently
• Lead pre-tender meetings and brief team members’ duties during estimate preparation and submission stage
• Ensure tenders are well documented in a timely manner
• Coordinate with client and internal departments
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Mechanical Engineering (ACMV, Fire Protection) or related field
• Minimum 2 years of experience
• Familiar with tendering, project cost control in M&E works
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

We are seeking highly skilled Commissioning, Qualification, and Validation (CQV) Engineers to provide risk-based CQV services for pharmaceutical and biopharmaceutical clients. This role offers opportunities to work across various areas, including process equipment, CIP/SIP (Clean-In-Place/Sterilize-In-Place), and process manufacturing systems, with a focus on maintaining compliance with regulatory standards.

Key Focus Areas:

1. CQV for Facilities, HVAC, and Equipment
2. CQV for Cleaning Validation

Responsibilities:

• Develop risk assessments, system impact assessments, protocols, and reports to support qualification and validation requirements, in line with regulatory standards and industry best practices.
• Create validation protocols using a science and risk-based approach to ensure compliance with regulatory requirements.
• Review, analyze, interpret, and summarize system and process performance data from executed activities for reporting and presentations to management.
• Investigate deviations, prepare detailed investigation reports, and create summary reports to ensure clear documentation of issues and their resolutions.
• Apply good judgment within defined practices and policies to select appropriate methods and techniques for obtaining solutions.
• Author or support the creation of test scripts for commissioning and qualification (CQ) of facilities, HVAC systems, manufacturing or analytical equipment.
• Conduct cleaning validation studies to ensure processes meet stringent regulatory requirements.
• Author or execute test scripts for DeltaV batch recipe testing, ensuring seamless integration with production processes.
• Draft DeltaV batch recipes, ensuring alignment with manufacturing specifications and process requirements.

Requirements:

• Experience with pharmaceutical and biopharmaceutical processes, including commissioning, qualification, and validation.
• Knowledge of DeltaV batch processes and recipe creation/testing is highly desirable.
• Proven expertise in facilities, HVAC, equipment, or cleaning validation is required for the respective roles.
• Strong analytical and problem-solving skills with a good understanding of industry regulations and standards.
• Experience with risk-based validation approaches and developing protocols in compliance with regulatory requirements.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

Job Responsibility:

• Strong knowledge of cryptographic concepts, Hardware Security Module's, and key management.
• Hands-on experience in implementing and operating Thales SafeNet HSMs.
• Hands-on experience in designing and implementing key management solutions for enterprises.
• Knowledge of networking and network security concepts.
• Experience working on PKI / key management solutions.
• Programming knowledge in C / C++ (preferred), Java, .NET.
• Experience integrating cryptographic libraries and HSMs with applications.
• Understanding of Information Security Architecture and ecosystem technologies and concepts required like firewalls, monitoring tools, encryption, web proxies, and identity & access management.

Qualifications

• Bachelor's degree in Computer Science, Cybersecurity, or a related field.
• Experience with Thales HSM or similar cryptographic solutions.
• Strong understanding of cryptographic algorithms and protocols.
• Familiarity with compliance standards (e.g., PCI-DSS, GDPR).
• Excellent problem-solving skills and attention to detail.

Interested applicants please send your resume to [email protected]

Venessa Goh Wee Ni

R24124686

Recruit Express Pte Ltd

EA License No: 99C4599

RCB No.: 199601303W

We regret that only shortlisted candidates will be contacted.

• Machine design in Electrical aspect
• Perform single line drawing
• BOM & machine manual writing
• Conduct machine acceptance with customer
• Coordination with sub-contractors for machine build
• Posses strong leadership quality and be self-motivated
• Experience in Machine AC & DC (Control) design
• Good knowledge and experience in machine automation
• Degree / Diploma in Electrical Engineering
• Fresh graduates are welcome to apply

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

This position is for FULL TIME morning/afternoon shifts, and will require some weekend shifts for maintenance and support activities. Work is non-routine and complex, involving the application of advanced technical/business skills in area of specialization. Provide direction and mentoring to others.

As a Principal Site Reliability Engineer, you will be part of the DevSecOps culture who will combine software and systems engineering to build, package, release and integrate tools and applications that will strengthen and innovate in the Cloud space within the Oracle SaaS-at-Customer and OCI DRCC infrastructure.

Responsibilities:

• Team members will engage in operational activities including monitoring, installation, patching, and upgrading of Oracle Fusion Middleware, Fusion Applications, and Oracle database implementations.
• Work on the SaaS Engineering Operations team with full stack deployment and support responsibilities.
• Address extremely complex, critical customer system issues on a routine basis and document technical solutions.
• Work directly with customers, product development, and product support to resolve critical customer application or performance issues in a timely basis.
• Understand the end-to-end configuration, technical dependencies, and overall behavioral characteristics of production services.
• Authority for end-to-end performance and operability.
• Perform frequent planned DR switchovers.
• Utilize a deep understanding of service topology and their dependencies required to troubleshoot issues and define mitigations.
• Collaborate with team members to improve the team's engineering tools, systems, procedures, and security.
• Lead implementation of tools and processes using DevSecOps methodologies to innovate, design, develop, secure, build, release and support fully automated CI/CD pipelines for the development and maintenance of Cloud Infrastructure Services and relevant applications.
• Manage and operate the infrastructure and configuration of microservices with a focus on end-to-end automation and infrastructure as code.
• Perform code development, OCI DRCC region builds, monthly release deployments, operations engineering, and promotion to testing and production environments to support Sprint activities.
• Participate in developing, implementing, and enforcing policies to enhance cloud system security.
• Recommend technical policies and consult with development teams on remediation.
• Collaborate with team members to improve the team's engineering tools, systems, procedures, and security.
• Apply DevSecOps methodologies in assisting to determine the direction of current and future development projects.
• Evangelize security and application solutions and controls by creating and communicating presentations both internally and externally.
• Demonstrate flexibility and resilience in response to changing or ambiguous situations.
• Work across development and operational environments.
• Stay abreast of software testing technologies and best practices.

Minimum Required Experience

• Relevant experience to functional area with around 10 years of experience (7+ years of software engineering and at least 3 years of DevSecOps culture)
• Extensive experience with Oracle RDBMS, Real Application Cluster (RAC), Disaster recovery, WebLogic, Identity Management, Apache/HTTP, Apex and Fusion Middleware and/or other Oracle technologies.
• Experience with cloud solutions and security engineering/design experience on one of the major cloud platforms AWS, GCP, Azure, OCI (preferred).
• Extensive experience in using Terraform for orchestrating application resources and infrastructure in CI/CD platform.
• Extensive experience in DevSecOps culture.
• Extensive experience with scripting and coding languages like shell scripting (must), Python (must), Ruby (plus), Go (plus) but not limited to.
• Experience developing cloud native CI/CD workflows and tools such as Chef, Puppet, Jenkins, Ansible, Rundeck and Git.
• Experience with Release Management cycles and Git.
• Knowledge of storage (ZFS preferred), IP networking, VPN's, DNS, load balancing and firewall (F5).
• Experience with one or more of the following required (Docker, Kubernetes, Terraform, Kafka, Microservices, Machine Learning, Artificial Intelligence)
• Experience with full software development lifecycle and delivery using Agile practices.
• Extensive background in cloud applications, cloud platforms and/or experience providing cloud infrastructure platforms in complex environments.
• Highly self-motivated with the ability to work both independently and with members of a global team without close supervision.

Job Descriptions:

• Technical window for new product development.
• Involvement in developing the methodology for implementation of new and improved processes.
• Perform hands-on testing such as setting up the presses, moulds, process development and other engineering activities.
• Develop and document moulding processes, ensuring they meet all technical and quality standards, including DOE and process window study.
• Utilize scientific moulding principles to analyse and troubleshoot process issues, implementing corrective actions to improve efficiency and product quality.
• Preparation of process-related technical documentation, like FMEA, validation protocol, engineering report, evaluation processing parameters and data.
• Trial new tooling and equipment and make modifications as needed to meet quality and production goals.
• Liaison with customer engineering teams, incorporate customer engineering concepts, and ideas into feasible designs to fit facility/company manufacturing process.
• Use creative skills to assist in solving design or manufacturing issues or constraints.
• Provide primary tooling component and packaging cost input for quotation of new business.
• Work closely with the internal engineering team and outside vendors in tooling, equipment, component and material development.
• Work closely with customers on product, project or system development issues.
• Keep up on the latest industry standards, processes and procedures.
• Participate in formal improvement team activities.
• Support all development and initiate improvements to achieve business objectives.
• Travel to other sites and customer sites to perform testing onsite and knowledge transfer when required.
• Other tasks as assigned by supervisors/managers.

Requirements:

• Diploma/Degree in Mechanical Engineering/relevant field
• Strong mechanical aptitude and problem-solving skills.
• 5 years of hands-on working experience and process DOE will be a plus.
• Experience in the Medical Device Manufacturing industry.
• Experience in LSR will be a plus.
• Experience in Minitab software will be a plus.
• ISO9001 and ISO13485 awareness certification will be a plus.
• Good communication skills.
• Lead the technical team and provide training where required.
• Able to liaise with customers and interact with relevant persons in technical discussions.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

About iNova

iNova is a different kind of health company. We are leading the way to better health by delivering innovative, patient-centric products that improve the lives of people around the world. Our diverse portfolio of iconic, market-leading consumer health brands and prescription medicines are backed by science and distributed in over 75 markets across Asia, Australia, New Zealand, Middle East & Africa and Europe. Experience the iNova difference today.

The Opportunity

We currently have an opportunity for a Data Engineer - Snowflake to based in Philippines or Singapore, to join our Group Technology Team.

Reporting to the Head of IT Strategy, Architecture & Governance, the Data Engineer will be primarily responsible for designing, developing, and optimizing data warehouse solutions with Snowflake. Secondarily, this role will involve supporting the integration of ETL processes using Microsoft tools (Azure Data Factory, LogicApps etc.) into the Snowflake ecosystem.

Knowledge of data visualization through Power BI would also be desirable to ensure provision of available, reliable, and structured datasets from Snowflake for both reporting and analysis purposes.

This role requires extensive knowledge of data engineering processes, data modelling, data warehousing, and business intelligence best practices. A successful candidate will be able to transform complex business needs into efficient, scalable, and secure data pipelines solutions.

Key Responsibilities

Primary - Data Warehouse Development and Management:

• Design and manage data warehouse solutions in Snowflake, ensuring data integrity, optimization, and security.
• Maintain and improve the performance of the data warehouse to meet the reporting and analytical needs of the business.
• Ensure Snowflake environment is optimized to integrate with upstream data-sources.
• Support Data Governance and Quality within the Snowflake environment.

Secondary - Data Integration / ETL and Visualization Support:

• Collaborate with internal and external integration specialists to identify data requirements and co-design data integration solutions.
• Consume output datasets from various internal and external sources into Snowflake as processed using Microsoft tools such as Azure Data Factory and LogicApps.
• Familiarity with other ETL tools such as Alteryx would also be beneficial.
• Ensure that Power BI reports deliver accurate, real-time data insights through providing appropriate reporting datasets.

Collaboration with Business and IT Teams:

• Work closely with business units including finance, marketing, supply chain, and sales to gather reporting requirements and translate them into technical solutions.
• Liaise with data governance teams to ensure adherence to best practices in data management and security.

Documentation and Compliance:

• Maintain documentation for all data pipelines, transformations, and visualizations, ensuring clarity and consistency for both technical teams and end-users.
• Ensure adherence to corporate policies and industry standards related to data security and compliance.
• Previous experience with CSV and GxP requirements would be a plus.

About You

To be successful in this role, you will possess a Bachelor’s degree in Computer Science, Information Technology, or a related discipline, with a minimum of 5 years hands-on experience in data engineering, with a focus on building and managing data warehouses in Snowflake.

Other key requirements for this role include:

• Snowflake Certification (SnowPro Core and/or other Advanced Certifications) a plus but not mandatory.
• Hand-on experience building data-pipelines in Snowflake with SQL and/or Python.
• Hands-on experience with Data Governance in Snowflake including compliance, security, privacy and access
• Ideally, experience with developing data-centric capabilities using Python in Snowpark and/or applications with StreamLit.
• Experience with ETL tools with a focus on Snowflake Integration, particularly within the Microsoft stack (Azure Data Factory & Logic Apps).
• Experience in building datasets to enable reports and dashboards using Power BI.
• Experience with data integration from cloud platforms and various APIs a plus.
• Effective Communication Skills (Written & Verbal).
• Personal accountability for outcomes and providing high-quality service to business users
• A strong work ethic and a well-organized self-starter.
• Optimistic “can do” personality.
• Be open to change and willing to learn new skills.
• An ability to follow up on pending issues and meet deadlines.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Technology Solutions Office is looking for Software Engineer

Internal Code: A25025

What will you do?

• Work with project leads, developers and operations on a live commercial project that has more than one million users on its platform.
• Software support and maintenance of deployed products and solutions
• Work closely with project management and experience design team to deliver project outcomes

• Strong hand-on experience in NodeJS Technologies
• Solid hand-on experience with AngularJS, ReactJS
• Knowledge of Object-Oriented Programming and SQL
• Experience with React Native, Microsoft SharePoint is a plus
• Proficient knowledge of languages such as .NET and/or Java will be a plus
• Ability to manage a hosting environment, including database administration as well as scaling applications to handle load changes
• Experienced in developing on Unix/Linux environments
• Effective communication skills & customer-oriented mindset
• Ability to work with a multiple team and stakeholders
• Enjoy constant learning and working with new technologies
• Excellent critical thinking and problem solving skills
• Experience in public sector projects is a plus
• Candidates who had previously managed small teams will be considered for the Senior/Lead positions
• Appointment will commensurate with experience and qualification.
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

You will be involved in the end-to-end agile development lifecycle for in-house RPA and AI/ ML projects starting from UI/ UX Design to Cloud Engineering & Operations, Software Development, DevSecOps, Quality Assurance and Application Security.

Key Responsibilities

1. Provide mentorship, evaluate submitted problem statements and work with Product Owner and/or Citizen Developers to automate potential day-to-day processes and workflows using Robotic Process Automation and AI/ ML (RPA)

2. Work with UI/ UX Designer as they engage the Product Owner and stakeholders for user research to produce the User Journey Maps and high-fidelity wireframes, which feeds into development sprints (where required)

3. Develop clean, efficient and extendable codes using C, C++, Java and other relevant programming languages, which includes understanding code refactoring and design patterns to reduce and/or eliminate technical debt (where required)

4. Work with Cloud Engineers to setup cloud services for deployment on Government Commercial Cloud (where required)

5. Work with Quality Assurance Engineer to prepare test cases as well as entry and exit criteria for SIT and UAT to ensure that user requirements are met as described per product backlog

6. Work with Application Security Engineer to perform System Security Acceptance Test (SSAT), which includes Secure Code Review (SCR), Vulnerability Assessment (VA) and Penetration Test (PT) and remediate the security findings before seeking clearance and approval from CISO and CIO respectively (where required)

7. Maintain and update library of reusable code snippets, components and modules

8. Develop technical documentation to guide future RPA and AI/ ML development projects

9. Identify best practices and continuous improvement in deployed automations

10. Conduct RPA and AI/ML-related brown bags and information sessions for staff to share knowledge and increase adoption

Requirements

1. Background in Computer Science, Engineering or related disciplines.

2. Highly proficient in programming languages such as Python, C, C++, Java and other relevant programming languages.

3. Good technical knowledge and experience working with RPA tools such as Blue Prism, UiPath, etc as well as basic understanding of foundation models from Microsoft, AWS and Google.

4. Participated in at least one full software or product development cycle, preferably using Agile Methodology

5. Excellent communication skills

6. Teamwork and collaboration skills

7. Possess critical thinking and problem-solving skills

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

• Perform pre- and post-sales technical support to customers.
• Provide support to the sales staff in technical presentations.
• Evaluate and establish a vision system performance specification.

Requirements:

• Diploma in any Engineering field
• At least 2 years of experience in field servicing and semiconductor industry.
• Able to troubleshoot electronics hardware system, PC hardware, OS and networking.
• Good understanding in Die Sorter or Wafer Sorter

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities:

• Design, deploy, and maintain machine learning models and algorithms from scratch.
• Implement AI solutions that integrate with existing business systems to enhance functionality and user interaction.
• Manage the data flow and infrastructure for effective AI deployment.
• Collaborate across teams to align AI initiatives with organizational goals.
• Monitor and optimize resources for performance, cost, and security.
• Manage the data flow and infrastructure required for effective AI deployment.
• Troubleshoot and resolve issues promptly.
• Develop and maintain documentation for AI solutions and processes.
• Developing, deploying and debugging IaC code for AI solutions.
• Ensure that AI solutions comply with company security policies and best practices in security.
• Stay updated with the latest AI technologies and best practices.

Requirements:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• 3-5 years of relevant experience.
• Strong knowledge of AI frameworks.
• Experience in the Financial Services/Payments industry.
• Knowledge of DevOps practices and tools.
• Experience with infrastructure as code (IaC) tools.
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills.
• Relevant certifications in AI technologies can be beneficial.
• Proficiency in Python, Java, and R
• Strong knowledge of AI frameworks such as TensorFlow or PyTorch