This is for a year contract subject to renew.

Responsibilities

· Assure sites are properly stocked with test tools. And test tools are periodically calibrated per AT standards.

· Participate in the Factory Acceptance Testing in the lab and preparation of FAT plan.

· Lead site commissioning activities of radio-based train control systems, including Functional tests and System Acceptance Test (SAT) and System Integration Test (SIT) and ensure that all interfaces to the signalling system are appropriately tested.

· Lead test and commissioning of the On-Board, Wayside, and Radio system system

· Liaise with Engineering / supplier for any design changes and modifications necessary subject to test results

· Record, report, and endorse test results when appropriate.

· Ensuring that testing activities are carried out in timely, logical and cost effective manners.

· Work with Engineering team for the evolution of drawings (ie. mark-up, change order, and transmittals) until the as-build stage.

· Develop productive relationships with client’s teams to ensure successful handover and post-implementation operation of projects.

· Plan and schedule site ITC activities in accordance to the rolling programme, that align with the master programme

· Produce red correction based on the released drawings and correct and rectify failures occurs during T&C phase.

· Raise NCR(None Confirmity) / MNCR (Material None Confirmty) / Fault report during fault found.

· Consolidate / track the following; records, software, hardwares, field changes.

· Implement field change orders

· Prepare installation and test and commissioning procedures / method statement for the communication-based train control system

· Verify the quality of installation works and raise concern if there is a quality issue.

· Troubleshooting, analysis in case of any issues encountered.

· Able to have a good collaboration with the vehicle testers and wayside testers during interface testing.

· Lead / Support the department for the payment milestones related to the test and commissioning

Requirements

·Bachelor’s degree in engineering or related field.

·Minimum 3 years of relevant experience.

Job Description :

• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and co-workers about analysis results
• Conducting research and applying new knowledge.
• Designing processes, materials, tools, and systems.
• Making improvements to existing processes, materials, etc.
• Implementing solutions and designs.
• Training other engineering personnel.

COMPANY DESCRIPTION

We are one of the largest one-stop Underground Utilities Infrastructure companies based in Singapore. We provide Underground Utilities Infrastructure construction and maintenance, sewer pipeline rehabilitation, road and airfield construction and maintenance as well as asphalt pre-mix production and construction waste recycling.

RESPONSIBILITIES

• Assist the Project Manager with daily project activities, including coordination, scheduling, planning, and implementation of work.
• Conduct regular site inspections to ensure construction activities are carried out in compliance with approved designs, contract specifications, safety standards, and quality requirements.
• Provide recommendations for corrective actions when deviations from the project scope, schedule, or quality occur.
• Serve as the point of contact for clients, consultants, authorities, and internal teams, ensuring effective communication of project progress, specifications, and any challenges.
• Review project proposals and plans to align project objectives with management expectations, ensuring performance criteria and client needs are clearly understood and incorporated.
• Oversee project timelines and milestones, proposing adjustments and modifications to the schedule as needed to ensure timely delivery.
• Assist in the achievement of team goals by actively contributing to relevant tasks and maintaining a collaborative work environment.
• Liaise with clients to coordinate project plans, schedules, and deliverables, ensuring alignment with client expectations and project requirements.
• Prepare and submit all necessary documentation, including method statements, risk assessments, progress reports, monthly reports, and other key project documents.
• Prepare and submit monthly progress claims in a timely manner, ensuring accuracy and completeness.
• Perform ECO duties as assigned.
• Implement and monitor environmental control measures to ensure compliance with Singapore's environmental laws and regulations, including those set by the National Environmental Agency (NEA).
• Required to actively monitor and prevent environmental health issues within construction sites.
• Perform other duties or tasks as assigned by immediate superior or Head of Department.

• Degree in Civil Engineering recognized by Singapore Professional Engineers Board (PEB)
• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Minimum 3 year of experience in constructions or civil engineering
• Those with experience in underground utilities especially cable pipes will be advantageous
• Possess excellent interpersonal and communication skills
• Service-oriented client relationship and people
• Self-motivated and able to work independently
• Preferably possess a valid Class 3 license

• 6 days' work week
• Preferably possess a valid Class 3 license
• The office is located at No. 3 Sungei Kadut Drive, Singapore 729556, in the North

Other Benefits

• Complimentary company transportation available from Woodlands and Kranji MRT Stations to the office, Monday to Friday, for your convenience
• Convenient company-provided lunch bus for easy access to meals
• Annual leave starting from 14 days
• Corporate Telecommunication Scheme with exclusive sign-up benefits for personal telecommunication plans
• Access to Medical Teleconsult services for quick and easy healthcare consultations
• Comprehensive medical benefits, including dental care and company provider health screenings
• Portable Medical Benefit Scheme (PMBS) with monthly contributions directly to your Medisave account, ensuring your long-term healthcare security

Why Join Us

• Dynamic Work Environment: Thrive in a fast-paced, ever-evolving workplace that offers new challenges and opportunities every day.
• Varied Responsibilities: Take on diverse and exciting tasks that keep your role engaging and fresh.
• Collaborative Team Culture: Join a team that values open communication, efficiency, and a strong commitment to security.
• Growth and Development: Benefit from a supportive environment with ample opportunities for professional growth, skill development, and career advancement.

b Description

• Carry out Civil and Structural related detailed design, drawings, analysis and calculation required.
• Responsible for the structural analysis, design and authority submission to liaise with client or contractor.
• Provide technical support and monitoring the construction progress, discuss with immediate Supervisor and give out solution on site issues.
• Prepare calculation and drawings for temporary or permanent structures in obtaining approval from authority.
• Check and review all Civil and Structural related drawings and documentation received from Contractor or Client.
• Can do drafting as assigned by immediate supervisor, inspection and other work assigned from time to time.
• Has knowledge in any related authority submission of projects

Job Requirements

• Diploma/Degree holder with Structural related discipline
• Preferred graduate from local University or from overseas University with Excellent Academic results.
• Fresh graduate may apply
• Ability to work independently.
• Familiar with EuroCode Design
• Excellent in written and verbal communication
• Experienced and proficient in using AutoCad 2007 and higher
• A team player with the ability to multi-task, prioritize and organize tasks
• Possess a "can do" attitude

Job Description:

• Provide assistance, knowledge and user support in all aspects of IT to ensure the company's business gets maximum benefit from IT systems

• Perform system changes and developments to any of company's systems and applications to agreed standards and timescales.

• Provide basic hardware/software configuration, fault finding and problem resolution.

• Conduct routine maintenance, monitoring and administration on IT systems, hardware, network and business applications.

• Provide video and audio-conferencing system support to end users

• Supporting Group Digital projects/initiatives

• Liaise with external support organisations to ensure their service meets company's business requirements e.g. Service Desk, Telecoms provision and support.

• Answer technical queries and meet operational service levels

• Ensure own work satisfies quality requirements and is documented to departmental standards with all associated databases updated.

• Work as a team member and share knowledge with colleagues.

• Work to agreed personal development plans to broaden the skill range available for all systems and application areas.

• Generate KPI’s and reports to share details on the IT service and IT activities.

• Provide user training, hints and tips and other user assistance as required on systems and applications.

• Provide purchasing advice to and purchase IT equipment on behalf of the business, place orders and manage the stock of IT equipment and spares.

• Be available to support the business during ‘out of core hour’ working time.

• Proactively supports and operates solutions and takes measures to enhance processes and improve service delivery.

• Manage incidents and requests from customers.

Job requirements

• A sound range of IT skills, which need to be kept up to date in line with IT developments in the business.

• Have a basic understanding of the desktop and LAN\WiFi\WAN technical domains, involving familiarity with a wide range of environmental components and support tools.

• Good knowledge of computer hardware, Windows and Mac operating systems, and software applications

• Good understanding of mobile / smart devices, Android and iOS

• Good working knowledge of video conferencing platforms, Zoom, BlueJeans, Skype for Business

• Good working knowledge and experience in managing Office365 and Azure

• To demonstrate the ability to acquire and apply new technical knowledge, be able to work without close supervision.

• Work to high professional and personal standards in a disciplined manner to agreed standards and procedures and maintain appropriate databases and documentation

• The ability to work within a complex technical environment and able to perform tasks and resolve problems on a variety of systems and applications

• The ability to work within a team and be willing to share learning and to learn from others.

• Possession of good verbal and written communication skills.

• Maintain good personal skills and an ability to cope with potential conflict.

QUALIFICATIONS AND EXPERIENCE

• IT / engineer related diploma from polytechnic or degree from university

• Microsoft Certified Systems Engineer (MCSE) or a COMPTIA certification would be beneficial.

• ITIL Foundation V3 would be beneficial

• Thoroughness for investigating and monitoring systems and tenacity for resolving the root cause of problems.

• Familiarity with professional development standards

• Thorough knowledge of IT products and the marketplace

• Maintaining a good network of contacts within IT and within the business

• It is beneficial to have experience in the following technical support areas – Windows operating systems, LAN / WiFi / WAN, Office 365, Office products Outlook, Internet Web Browsers, Skype, Zoom, BlueJeans messaging and conferencing.

PREFERRED SKILLS

• Strong interpersonal, communication and presentation skills.

• Must be analytical, self-driven and proactive in keeping up with new technologies and attention to details.

• Independent worker with initiatives, resourceful, positive attitude, friendly deposition, good team player and able to deliver results within tight deadlines.

• Experience of project management tools and techniques to assist in major Information Technology implementation projects.

• Some on-call or after hours work may be required

Company’s Profile

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for Senior Software Testers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio

Responsibilities:

• Test Planning and Strategy: Define test objectives, criteria, and priorities based on software requirements and business goals.
• Test Execution: Execute hands-on testing, including manual and automated testing, to verify software functionality, performance, and security.
• Test Automation: Develop and maintain automated test scripts using industry-standard tools and frameworks.
• Defect Management: Establish and maintain a defect-tracking system and ensure defects are documented, prioritized, and resolved in a timely manner.
• Collaboration and Communication: Collaborate closely with software developers, product managers, and other stakeholders to resolve issues and improve product quality.
• Test Documentation: Create and maintain test documentation, including test plans, test cases, and test reports.

Requirements:

• Min. 3-4 years' experience as a Software Test Engineer, with a focus on automation and leadership.
• Strong knowledge of software testing methodologies, tools, and best practices.
• Proficient in programming/scripting languages (e.g., Typescript, Svelte, Golang).
• Extensive experience with test automation tools and frameworks (e.g., Playwright, Testify, Selenium).
• ISTQB certified tester or similar certification is a good bonus.
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills.

Your recruiter for this job: WhatsApp Celine @ 6421 4966 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Celine Chan | R21103433

Talentsis Pte Ltd | EA No: 20C0312

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.


Responsibilities:

• Offer technical support to field service engineers and customers as needed.
• Assess and define performance specifications for vision systems.
• Oversee customer-specific projects and associated documentation.
• Provide technical documentation and training as necessary.
• Contribute to product improvement initiatives.

Requirements:

• 1-3 years’ experience in Engineering discipline
• Vision/Optical Inspection system knowledge; semiconductor manufacturing experience

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Responsibilities summary

Job Description

The Principal / Senior Software Engineer will be a key member in the solution team which has a mission to deliver innovative and high quality digital products. The SE should come with a product mindset and be comfortable working in an agile team. The SE will be expected to contribute in various tech areas such as frontend, backend, testing and ops. Candidates with relevant knowledge, skills and experiences will be considered for senior position.

Responsibilities

• Lead single or multiple squads of Agile engineers from multiple locations, fostering skill development and knowledge sharing

• Collaborate with product manager and clients to understand client requirements and develop product and customised solution

• Drive the design, development and implementation of scalable, maintainable and efficient software solutions

• Advocate and demonstrate software features and products to customer and internal stakeholders

• Make high-level design decisions and define technical standards for coding, tools and platform

• Adopt automation tools to improve development and operation processes

• Investigate new technologies and share area of expertise

• Collaborate, mentor, guide and interview team members for future expansion of the software development team

Requirements

• 7-15 years of product and software development experience

• Expertise in 4 or more areas below:

1. Front end development framework (HTML/CSS/JS, React, ReactNative, Bootstrap)

2. Back-end development framework (NodeJS, ExpressJS)

3. Cloud platform (AWS and/or Azure)

4. Database technology (both SQL and NoSQL)

5. Testing (Cypress, Appium and Cucumber)

6. Others (Postman, Expo, Serverless Framework, Terraform)

• Expertise with system, software, cloud and database architecture and design

• Experience using development/devops tools such as VSCode, BitBucket, Jenkins, Docker

• Experience using at least two design patterns (SPA, MVC, RESTAPI, microservices, etc.)

• Experience using collaboration tools such as Confluence, Jira, MS Teams, and Figma

• Experience in development using user story and acceptance criteria

• Familiar with software development methodologies (Agile/Scrum/Kanban/XP/TDD/BDD)

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Mandatory Skills

Reports To

Project Manager

Job Overview

• To work with Application and Infrastructure Teams to Setup & Configure Infrastructure, Application in OCP

Responsibilities and Duties

• To coordinate in setting up Infrastructure and support Application Infra needs
• To work with Application team to Setup, Migrate, Test Applications from VMs to OCP

Qualifications

• Well versed and Experienced in Redhat Openshift (OCP) Development & Architecture
• Knowledge in Linux OS & MariaDB
• Experience in JAVA Development, Shell Scripting, DevOps
• 5 Years minimum professional experience and 3 Years minimum relevant experience
• Willing to work in shifts and in weekends
• Team player to work with multiple teams and teammates
• Ability to work independently and handle multiple concurrent initiatives
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills
• Ability to meet deadlines with no compromise on the quality of the work product.

Responsibilities

• Provide IT technical onsite support for end user services problem which includes identification, diagnosis, rectification, and escalation.
• Installation, re based desktops, notebooks, printers, scanners hardware components. Examples of such components are hard disk drive, CD-ROM drive, DVD-ROM drive, CD/DVD writer, multimedia kit, random access memory, processors etc.
• Installation, re-installation, troubleshooting and reconfiguration of Microsoft Windows and Microsoft applications that are found in the Desktop PCs and Notebook PCs. Examples of such software are Windows XP/7 OS desktop OS, MS Office, Internet Explorer, MS Outlook, MS Outlook Express and Chinese version of the similar software, etc.
• Installation of customer’s access and in-house applications.
• Provides support for queries, escalation, problem determination, resolution, and MAC – move, add and change.
• Printer Maintenance
• Provide Offsite Standby support for emergency incidents / cases after office hours on a rotational basis amongst the team personnel.
• Duty event of a dropped / missed call, the duty engineer is to return call within 15 mins of the dropped or missed call.
• Any other ad hoc duties as assigned by supervisor.

Requirements

• Candidate must possess at least a Professional Certificate/NiTec /Diploma/ Bachelor’s Degree level in Computer Science/ Information Technology or equivalent.
• Must have min 1-3 years’ experience in Desktop Support
• Able to work in a banking environment and open for shift work in case required.
• Proficient in Microsoft Office applications (emails, Excel)
• SCCM (familiar with packaging) & must have printer troubleshooting experience.
• Good to have EUC Support, IT helpdesk /IT support experience desirable.

Interested applicants, please email your resume to Andre Chua Jing Ming

Email: [email protected]

CEI Reg No: R1989053

EA Licence No: 99C4599

Recruit Express Pte Ltd

Job Descriptions:

• MCU hardware design and software coding in C
• Field installation
• Troubleshooting
• Document & report writing
• Support other department’s operations as and when needed
• Any other ad-hoc duties as per assign by the supervisor.

Requirements:-

• Candidate must possess at least a ITE/Advanced/Higher/Graduate Diploma in Electronic Engineering or equivalent.
• At least 1 Year(s) of working experience in the related field is required for this position.
  • Knowledge and experience in Electronic circuits (Digital/Analogue/RF)
  • Experience in MCU hardware design and software coding in C
• Work independently in the field
• Trouble-shooting capacity
• Ability to work individually and as part of a team
• Effective communication skills with the ability to communicate clearly to cross-functional teams within the company or external customers/vendors
• Class 3 driving license

Airconditioning Engineers

1) Ability to lead and manage teams

2) Operation Supports to teams and clients

3) Self Motivated Individuals

4) Good Team Player

5) Experienece In Troubleshooting and Repair / Service of Split Type and VRF/ VRV systems

6) Valid Class 3 License

7) Minimum 5 years experience in Airconditioning Field

8) Possess field experience is a MUST

9) Strong troubleshooting and analytical skills

10) Prior experience working in MNCs Agent will be an advantage (I.E. Daikin, Mitsubishi, Toshiba)

Job Description:

• Manage project site daily matters and follow closely the project schedule and ensure the site work are executed as planned.
• Review and check the Project related reports and ensure the information is accurate for the purposes of submission or invoicing for completed works or any following up actions if required
• Carry out tasks assign from team leader/Project manager for any breakdown / calls from client.
• Monitor and follow up on procurement of part and preform price negotiation to meet the budget.
• Coordinate with engineer/technician/subcons for day to day work and follow proper work processes(Training/T&C/A&A/Application related work).
• Ensure workmanship and quality for all equipment install at site and coordinate with team members until project handover.
• All other ad hoc duties as assigned.

Requirements:

• Diplomas in Engineering.
• Minimum 1 years of experience as Project Engineer
• Experience in BMS/FM/ELV is prefer.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Developing Engineering Strategies.

• Implementing Engineering Strategies.

• Conducting Project Safety Briefing.

• Controlling Materials Order and Usage.

• Supervising your Construction Team.

• Increasing our Company's work quantity.

• Improving our Company's work quality.

• Reporting to the Director and ad-hoc duties.

As a Network and System Engineer, you will play a critical role in designing, implementing, and maintaining our customers’ network and system infrastructure. You will be responsible for ensuring operational systems meet contractual Service Level Agreements (SLAs), performing routine preventive maintenance, diagnosing and resolving technical issues, and managing project documentation and reports. This role requires a mix of technical expertise, problem-solving skills, and the ability to communicate effectively with both technical and non-technical stakeholders.

Roles & Responsibilities

Infrastructure Projects: Participate in the setup or upgrade of system and network infrastructure projects, ensuring seamless integration and operation.

Operational Support: Provide support for operational systems to ensure they satisfy contractual Service Level Agreements.

Maintenance & Operations: Perform routine preventive maintenance and operational activities to ensure system health and performance.

Technical Troubleshooting: Diagnose and rectify technical issues promptly to minimize downtime and maintain system reliability.

Documentation & Reporting: Create and maintain project documentation and reports, ensuring accuracy and clarity.

Requirements

Operating Systems: Experience with Windows Server OS, Unix/Linux OS, and virtualization environments (e.g., VMware, Hyper-V).

Cloud Architecture: Knowledge of cloud architecture patterns, including containerization (Kubernetes), is an advantage.

Troubleshooting & Analytical Skills: Strong troubleshooting skills and an analytical mindset with problem-solving aptitude.

Communication Skills: Excellent written and verbal communication skills to convey technical ideas to both technical and non-technical audiences and contribute effectively within a team environment.

Networking: Working knowledge of routers and switches is an advantage.

Security: Experience in hardening operating systems, systems, and network equipment.

IT Infrastructure Services: Proficiency with IT infrastructure services such as Active Directory, DHCP, DNS, Database, Web, or Application Servers.

Preferred Qualifications

ITE, Diploma in Information Technology or higher, or a related field.

Key Competencies

Attention to Detail: Ensuring the accuracy and thoroughness of system configurations and documentation.

Team Collaboration: Ability to work collaboratively within a team and communicate effectively with different stakeholders.

Adaptability: Flexibility to adapt to changing project requirements and technologies.

Proactive Learning: Continuous learning and staying updated with the latest industry trends and technologies.

If you are a motivated individual with a passion for network and system engineering and a knack for solving complex technical problems, we encourage you to apply and join our dynamic team.

Job Description

• Design and calculation of building's structural engineering works
• Conducting technical feasibility study, life cycle study and planning for building engineering.
• Preparation of study reports, design reports, technical notes and public consultation papers.
• Preparation of tender documents and technical specifications.
• Evaluation of tenders and preparation of tender assessment reports.
• Provide support in project management and contract administration for building engineering contracts.

Requirements

• Bachelor Degree in Civil Engineering
• Minimum 3 years of hands-on design experience in building and/or infrastructure projects
• Good project management and technical skills
• Team player and able to work independent with minimal supervision

Position Overview:
We are seeking a highly skilled and motivated Electrical and Instrumentation Engineer to design, develop, install, manage, and maintain electrical and instrumentation systems within our facilities. The ideal candidate will ensure that all E&I systems operate efficiently, safely, and in compliance with industry standards and regulations.

---

Key Responsibilities:

1. System Design and Development:

Design electrical and instrumentation systems for industrial projects, including control panels, wiring diagrams, and PLC/SCADA systems.

Specify and select appropriate instruments, sensors, and control devices based on project requirements.

2. Installation and Maintenance:

Oversee the installation, commissioning, and calibration of electrical and instrumentation systems.

Conduct regular inspections, preventive maintenance, and troubleshooting of E&I equipment.

3. Project Management:

Collaborate with cross-functional teams (mechanical, civil, process) to ensure seamless integration of systems.

Manage timelines, budgets, and resources for E&I projects.

4. Technical Support:

Provide technical support for operational teams, addressing equipment failures and process inefficiencies.

Develop and implement solutions to improve system reliability and performance.

5. Compliance and Documentation:

Ensure compliance with electrical codes, safety standards, and environmental regulations.

Maintain accurate documentation, including technical drawings, manuals, and maintenance logs.

6. Continuous Improvement:

Identify opportunities to optimize processes, reduce energy consumption, and enhance system efficiency.

Stay updated with the latest advancements in E&I technology and integrate them into operations where applicable.

Required Qualifications:

Bachelor's degree / Diploma in Electrical Engineering, Instrumentation Engineering, or a related field.

Proven experience in electrical and instrumentation engineering, preferably in industrial or manufacturing settings.

Proficiency in PLC programming, SCADA systems, and control systems design.

Strong knowledge of electrical systems, instrumentation devices, and relevant standards (e.g., IEC, NEC, ISA).

Experience with AutoCAD, EPLAN, or similar design software.

Excellent problem-solving and analytical skills.

Preferred Qualifications:

Professional Engineer (PE) or equivalent certification.

Knowledge of Industry 4.0 technologies, IoT, and digital transformation in industrial automation.

Familiarity with Distributed Control Systems (DCS).

---

Key Competencies:

Strong technical expertise in electrical and instrumentation systems.

Effective communication and collaboration skills.

Ability to work under pressure and meet deadlines.

Attention to detail and a commitment to safety and quality.

---

Work Environment:

Industrial plant, project site, or office setting.

May involve travel to project sites and occasional extended hours to meet

Our client, a leading company in Singapore, is expanding. They value self-development, career progress and most importantly a healthy working culture. Join them in this exciting journey as a:

Assistant Project Engineer (BMS)

Job description

• Must have relevant experience in Building Management System (BMS).
• Have strong knowledge in designing a system for BMS system.
• Able to manage project cycle independently with minimum supervision.
• Work with external parties and customers to plan, organize and direct activities concerned with assigned projects.
• Develop project schedules in compliance with customer requirements, deadlines, and/or milestones; develop mechanisms to track schedule progress in the field; and update the schedule regularly.
• Responsible for site activities, coordination and supervision works related to engineering and systems design.
• Ensure timely completion of all projects particularly the T/C schedules.
• Responsible for project management including attending meetings, coordination, design and plan out shop drawing and submission of documentation and supervision.
• Liaise with consultants, architects and contractors and handle all technical matters.
• Ensure project works compliance with Workplace Safety and Health (WSH) policies and practices.
• Attending site meeting and coordination with stakeholders, external parties and customers to plan, organize and other related activities for the assigned projects.
• As and when to take on new assignments.

Key Requirements

• Degree / Diploma in Engineering equivalent
• Minimum 2 years of relevant working experience
• Have full understanding of Instrumentation HVAC/ACMV control like AHU, Chillers, RCU etc.
• Knowledge of PLC programming (preferably Siemens PLC)
• Experience in SCADA software and strong knowledge of Industrial Control and Building Management System.
• Prefer relevant working experience; prefer with LTA ECS/LCS, TVS project experience.
• Prefer with IEC 61508 and LTA documentation submission.

Remuneration:

• $2,800.00 - $4,500.00 per month

Work Arrangements:

• Work Location: In person

Please submit your updated and comprehensive CV to:

[email protected]

for a P&C discussion. Your CV should be updated and in MS WORD FORMAT ONLY (NOT PDF) with full career details, stating current or last drawn salary with full breakdown such as base, incentives, AWS, etc. and expected salary, contact details, educational qualifications, working experiences, reasons for leaving each past employment(s) and availability date.

For quicker processing, please indicate the position applied for on the subject header. We regret to inform that only shortlisted candidates will be notified. However, if you are not selected, we will explore other positions for you, in the near future. All applications will be treated with the strictest confidence.

What our client offers

Our client offers an attractive remuneration package, a fast-paced and exciting working environment and provides challenging opportunities for career advancement. They care about their employees. They are not just an employer. They are a Team. They do not just offer you a job, they offer you a career. By joining their team, you will find a strong purpose and deep meaning in everything you do. You will have the chance to make a real difference for customers, working alongside a passionate team of like-minded colleagues, while building your knowledge/skills and developing your career in a fun, dynamic and fast-growing organization.

Our client advocates fair employment practices, recruits talents based on merit and fit with their corporate values and complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. They are committed to achieving diversity and creating an inclusive working environment. They welcome all applications irrespective of social and cultural background, race, gender, age, religious belief or nationality.

Personal Data Protection Statement for Job Applicants

Please be informed that the personal data you provided by way of your job application to Grace HR Solutions will be collected, used and disclosed by or on behalf of Grace HR Solutions to determine or investigate your suitability, eligibility or qualifications for employment with Grace HR Solutions and/or its clients and manage your application for employment with Grace HR Solutions and/or its clients including identifying you as potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Thank You!

ANDY LUCAS | CEI No: R24123824 |

Grace HR Solutions | EA Licence No: 22C1305 |

UEN: 53456396A

Company Overview

Grace HR Solutions is a boutique professional recruitment consultancy involved in the recruitment of permanent, contract, and temporary positions. We are fully committed to achieving excellence in every assignment through leveraging our vast candidate pool, industry connections, and strategic insights. As the total recruitment and staffing solutions partner, our goal is to provide our Clients the best staffing solutions through an integrated database network supported by localized content and services. We strive to be efficient and effective in matching the right candidate to the right job. Reach out to us to discover even more about how we can help you with all your staffing needs or your own career

Job Type: Full-time

Pay: $2,800.00 - $4,500.00 per month

Schedule:

• Monday to Friday

Location:

• Singapore (Preferred)

Work Location: In person

• Design, build, and maintain CI/CD pipelines using various CI/CD platforms to streamline cloud deployments. • Integrate automation solutions across applications to enhance operational efficiency. • Ensure best practices and security are prioritized when developing CI/CD pipelines. • Continuously improve operational workflows through task automation. • Collaborate with subject matter experts to ensure automation solutions meet business requirements. • Act as an innovative, hands-on DevOps engineer, focusing on both the technological and strategic aspects of the platform.

Requirements:

• Proven experience with Kubernetes and containerization technologies. • Strong understanding about DevOps and DevSecOps terminology. • Proficiency in automation tools such as Jenkins, GitLab Runner, AWS Lambda, AWS CodePipeline, and AWS CodeBuild. • Hands-on experience with Infrastructure as Code (IaC) tools like Terraform and CloudFormation. • Management configuration tool like Ansible, Puppet. • Familiarity with scripting languages such as Python, Bash, and PowerShell. • Experience working in multi-cloud environments, including AWS, Azure and GCP

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Report on work progress during meetings.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Report on work progress during meetings.

Job Requirement:

• Preferably with a Degree in Engineering related studies.
• Minimum 10 years of engineering/design experience
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player

• Technical transfer product/project in assembly and testing and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA preferred
• Good communication and problem-solving skills
• Organized and disciplined individual
• Possess leadership skills
• Ability to work in a team setting to maximize results

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.