Job Description & Requirements

NACT Engineering provides drones accessories for all sizes and use-cases. Our intimate knowledge of robotics systems places us at the forefront of a burgeoning mechanical revolution. As a company at the cutting edge of engineering and robotics, we are looking for a suitable candidate that will push NACT forward as a bespoke drone solutions provider for our clients in the APAC region.

Highlights of working at NACT

• Close proximity to many amenties along alexander road
• Competitive compensation package remunerated based on skill and experience.
• High level of autonomy on the job with training opportunities provided for upskilling and learning
• Open culture and collaborative environment
• High growth industry

Job description

• Continuously update the IOT standalone GUI, and write manual documentation for the team to adopt.
• Work with electronics and full stack engineer to create a bidirectional data transfer, to create web based GUI to display robot product status
• Conduct troubleshooting of IOT controlled robotics system to verify the cause of failures, and assist in arriving at the corresponding solution.
• Ensure compliance with company programs procedures and applicable quality system regulations and standards.

Position Responsibilities

• Work on Single Board Computer to implement sensors and calculations to enable robotic functions
• Independently perform some level of failure analysis.
• Supports equipment development efforts for new products, and process improvements. These efforts may be the internal development of process equipment or coordination with an external equipment integration company.
• Supports processes. This support might include daily support of production operations as well as leading reliability and yield improvement activities for the IOT product.
• May be expected to work on complex problems where analysis of situations or data requires an evaluation of many tangible and intangible factors. Individual will be required at times to make complex technical recommendations on design quality and reliability.
• Writes Process Specifications and Manuals when applicable.
• Supports Return Merchandise Authorization process by providing root cause analysis report.
• Collaborates with Technical Experts from other software/hardware partners to implement new Product/ Process activities across the facilities following Technology Roadmaps and Design Engineering activities.
• Performs other position related duties as assigned.

Quality Responsibilities

• Reports any observed or informed process and/or product non-conformities.
• Finds resolution of Quality Situations at the area of responsibility.
• Complies with all the requirements in the operational procedures at the area of responsibility in order to meet the requirements of all applicable Quality System regulations.

Our Company is working closely with a Prestigious Public Listed organisation in Singapore. Due to our dynamic expansion in projects, we are looking for System Engineers to be part of the project team, who is able to maintain, upgrade and manage server system hardware and networks and in-house development environment software applications.

Resourcefulness is a necessary skill in this role. The candidate should be able to diagnose and resolve problems quickly. He/she should also have the patience to communicate with a variety of interdisciplinary teams and users.

Candidate must be able to perform routine rotation standby technical support to customer call and travel to customer site during silent hour (after working hours) to resolve operation issue.

Job Responsibilities:

• Install and configure software and hardware
• Manage network devices and technology tools
• Ability to understand overall system network architecture
• Monitor performance and maintain systems according to requirements
• Troubleshoot issues and outages
• Ensure security through access controls, backups and firewalls
• Upgrade systems with new releases and models
• Generate and maintain technical documentation, manuals and IT policies

Job Requirements:

• Proven experience as a System Engineer/Administrator, Network Administrator or similar role
• Experience and knowledge in VMware and SAN
• Experience with databases, networks (LAN, WAN) and patch management
• Knowledge of system security (e.g. intrusion detection systems), OS hardening and data backup/recovery
• Familiarity with various operating systems and platforms (MS Windows and Red Hat preferred)
• Resourcefulness and problem-solving aptitude
• Degree/Diploma in Information Technology, Computer Science, Computer Engineering or a related discipline

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to analysis of production lines to identify improvement, fostering cross-departmental collaboration for project implementation, and utilizing data analysis for management reporting. It involves optimizing automated production systems for efficiency, supervising personnel and machinery, and ensuring production targets are met.

Key Responsibilities

• Conduct in-depth analysis of production lines and promote cross-departmental cooperation to propose and implement improvement projects.
• Utilize data analysis for effective management reporting.
• Optimize and maintain automated production systems to enhance efficiency.
• Supervise personnel and machinery while driving the achievement of production targets.

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Computer Science, Industrial Engineering or engineering related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

• Design systems and components that meet needs and requirements.Produce outline designs.Conduct Experiments methodically, analyse data and interpret results.Test and evaluate theoretical designs.Identify, formulate and produce effective solutions to emerging problems.Evaluate final product’s overall performance, reliability and safety.Alter and modify design to meet requirements and to eliminate malfunctionsEstimate budget and scope of project.Solicit observations from operators.Prepare product reports and documentation.Engage in lifelong learning and develop new theories or methods

1. know autocad

2. prepare electrical shop drawing / as built drawing

3. attend site meeting

4. update site progress

5. submit progress claim

6. prepare power shut down/turn on

7. prepare OMM

8. prepare catalog submission

9. can do tender

10. site check before testing & handover

11. coordinate site work with maincon

Job Description

Job Responsibilities:

· Assist the Project Manager in supervising project(s) comprising design, purchasing, quality control, production, and commercial.

· Coordinating drawing approval between classification, designer, and third parties

· Recommend, review & approved design specification

· Responsible for execution of works control as per the project schedule that is planned by the Project Manager or himself

· Clients facing from start to end of project be it site inspection/feasibility/visits, operational requirements such as solar system design and execution

· Vendor management to ensure the project is on schedule

· Provide inputs on accomplished schedules, manpower, machinery, and equipment status to the Project Manager as well as project progress reports

· Costs benefits analysis on proposed project designs and suggesting cost reduction analysis for solar systems

· Administrative files and documentation where applicable

Job Requirements:

· Diploma/Degree in Civil/related engineering discipline/renewable energy

· Min. 2 years of relevant experience in similar industries/fields handling HDB-related projects/renewable energy/solar photovoltaic

· Excellent communication and interpersonal skills to convey technical concepts clearly & effectively

· Proactive, energetic, adaptable, analytical & problem-solving abilities

· Able to work independently in a fluid environment

We are seeking a dedicated and skilled Platform Engineer with expertise in Oracle Cloud Infrastructure (OCI), BMC, Control-M, Moody's Risk Analytics, and SQL. The ideal candidate will provide technical support and ensure the smooth operation of platforms in a 24x7 environment. This role involves proactive monitoring, incident resolution, and contributing to platform stability and performance.

• 3–6 years of experience in platform engineering, technical support, or related roles

• Proficiency in Oracle Cloud Infrastructure (OCI) and its components.

• Hands-on experience with BMC and Control-M for monitoring and scheduling tasks.

• Strong knowledge of Moody's Risk Analytics tools.

• Advanced SQL skills for query writing, optimization, and troubleshooting.

• Experience in providing 24x7 technical support for mission-critical platforms.

• Strong problem-solving skills to identify and resolve platform issues efficiently.

• Familiarity with ITIL processes and best practices for incident, problem, and change management.

• Detail-oriented and proactive approach to maintaining platform reliability.

• Ability to work in a fast-paced, rotational shift environment.

• Assist project manager to manage projects from initiation through completion, ensuring timely delivery within budget
• Coordinate with internal team and external stakeholders to ensure seamless project execution
• Oversee the design, implementation, and integration of control systems, SCADA systems, and Programmable Logic Controllers (PLCs) to meet client requirements
• Prepare and review project documentation, including project plans, specifications, technical drawings, and operation manuals
• Conduct site surveys, Factory Acceptance Test (FAT), Site Acceptance Test (SAT), and commissioning activities at client sites
• Troubleshoot and resolve issues related to system performance, hardware and software integration
• Ensure adherence to safety, quality, and regulatory standards in all projects activities
• Provide technical support and training to clients and end-users during the implementation and handover phases
• Liaise with suppliers and subcontractors to ensure delivery of materials and services on time
• Assist in preparing technical proposals and cost estimates for new projects

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 6pm
• Training provided for those without/lesser experience

Job Responsibilities:

• Planning / Assign sub-contractors and manpower for the maintenance work and from project handover
• Supervising & Managing of Sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, troubleshooting and upgrading / improvement of system to ensure optimal functioning of BMS/DCS/PLC/SCADA System
• Record servicing & maintenance data and generate service report
• Provide Technical / Operational guidance, engineering solution to the Maintenance Site Facility Management
• Others ad hoc duties as assigned

Job Requirements:

• Minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent
• Knowledge on BMS / PLC / HVAC will be a plus point
• Candidate without or with lesser experience are welcome as Training will be provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Summary :

5.5 days / Alt Saturday

Site Engineer up to $6000

Senior Site Engineer up to $7000

Industry: Construction (Civil & Structural)

Industry: M&E Fire Protection

Job Scope:

1. Site Supervision: To Oversee daily construction activities to ensure they align with project plans and timelines.

2. Quality Assurance: Monitor workmanship and materials to ensure compliance with specifications and standards.

3. Coordination: Collaborate with project managers, subcontractors, and other stakeholders to facilitate smooth operations.

4. Technical Support: Provide on-site technical assistance and resolve any engineering-related issues that arise.

5. Site Inspections: Conduct regular inspections to assess progress and identify any potential problems early.

6. Documentation Management: Maintain accurate records of project progress, including daily reports, logs, and photographs.

7. Health and Safety Compliance: Ensure that all safety protocols are followed and promote a safe working environment.

8. Problem Solving: Identify issues and implement effective solutions to minimize disruptions.

9. Client Communication: Liaise with clients to update them on progress and address any concerns.

10. Budget Monitoring: Assist in tracking project expenses and resource allocation to stay within budget.

Job Requirements:

• Bachelor's Degree / Diploma in Civil Engineering / Mechanical Engineering / Electrical Engineering OR any equivalent is welcome to apply
• Strong communication, organizational skills, and a solid understanding of construction practices and regulations.
• Good to have experience with LTA project
• Entry level is welcome to apply as there's assistant engineer's vacant available & training is provided.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

Working with FCBC’s Corporate Communications team, the Senior Executive is the point person to effectively communicate the organisation’s key messages, activities and initiatives through impactful copywriting and layout of slides. The candidate must be meticulous in carrying out administrative tasks as well as comfortably write copy for a variety of platforms, and recommend communications strategies and ideas to promote key initiatives to our church audience and external stakeholders, both locally and at international conferences and events.

Responsibilities:

· Content

* Produce weekly meeting and service deliverables including prayer meeting Powerpoint slides, pre-service slides, and sermon slides

* Produce, write and edit content for the website and other platforms to introduce new initiatives, cover events, and share compelling stories to showcase our vibrant church activities, personal stories of transformation, and impact of the church

* Facilitate interviews, support in logistics for filming of videos

· Publicity

* Manage publicity requests, schedule announcements, draft announcement scripts and prepare accompanying slides and visuals to excite and inform the audience on upcoming initiatives

* Coordinate production of collateral including visuals for publicity, banners, flyers, and more

* Monitor news reports and provide regular summaries to senior leadership on topics of interest when required

· General Communications

* Manage feedback mailbox and work with departments to craft appropriate responses

* Assist the Manager on all internal and external communication matters including vetting and drafting of talking points and announcements

* Brainstorm and implement new ways to engage church members and visitors

· Social Media

* Create engaging content to cover happenings of the church, share announcements and impactful stories

* Monitor sentiments on media and social media, and analyse trends and platform performance to understand stakeholder interests and effectiveness of the message

* Any other tasks as assigned

Requirements:

* Excellent English writing skills, with the ability to tell compelling stories and adapt copy to a variety of writing styles and genres

* 3 to 5 years of experience in an in-house communications role.

* A diploma or degree in communications, media studies, English, marketing, digital marketing, or sociology preferred – however, those with relevant experience will also be considered for the role.

* Fresh graduates with strong internship experience are welcome to apply.

* Skilled in the use of common software such as Microsoft Word, Excel, Powerpoint

* Possess other skills such as phone photography, or basic visual creation with applications such as Canva, or video editing with Capcut (advantageous but not necessary)

* Motivated with a positive outlook, and enjoy meeting people from all walks of life

Job Title: Communications Specialist (1 Year Contract)

Location: Singapore

About the role:

The Communications Specialist role is focused on developing and delivering the organization's internal communication strategy. This position ensures employees have access to business information and knowledge, contributing to effective communication within the organization.

How you will contribute:

Communication Strategy & Planning

• Support Head of GEM Communication in executing communication plans.
• Assist in coordinating communication activities across local and regional teams to ensure business objectives support GEM’s branding and messaging guidelines.
• Help promote global communications initiatives within the region and assist in communicating regional initiatives across GEM.

Content Development & Management

• Create engaging and informative content for multiple platforms, including social media, the company website, and local channels.
• Collaborate with subject matter experts to develop messaging that showcases GEM’s initiatives, achievements, and values.
• Manage internal communication channels including GEM MyTakeda site, Viva Engage, and EDMs.

Event Support & Execution

• Support the execution of GEM President-led communications and events, such as town halls, conferences, and internal meetings.
• Support the planning and execution of events, webinars, and other outreach activities that promotes GEM’s initiatives and strengthen relationships with stakeholders.
• Help review that all event materials are aligned with GEM’s branding and messaging.

Vaccines Communications

• Support Vaccines BU with internal and external communications plans and stakeholder engagement, advocating for vaccine policies aligned with company objectives.
• Assist in planning and executing communication strategies for future vaccine product launches and campaigns.

Stakeholder Engagement & Relationship Management

• Assist the Head of Communications in liaising with external partners involved in collaterals production, creative design, translation, photography, and video production.
• Support the coordination of communication efforts with internal & external teams to ensure messaging is consistent and aligns with GEM’s initiatives and goals.

Crisis Communication & Monitoring

• Support in managing communications plans during crisis and critical situations, ensuring GEM’s reputation is maintained with guidance from senior team members.
• Assist in monitoring industry trends and developments, providing insights to the Head of Communications on any emerging issues.
• Help track media coverage and social media discussions during crises to support timely responses.

Performance Analysis & Reporting

• Track and analyze communication metrics to evaluate the effectiveness of campaigns and initiatives, providing data-driven recommendations for improvement.
• Analyze social media performances to continuously refine and improve engagement strategies.
• Prepare regular reports for Head of Communications to keep leadership team informed of communication activities and their impact on business objectives.

What you bring to Takeda:

• Bachelor’s degree in communications/ journalism/ administration or related field.
• 1 - 2 years of experience in a communications role or relevant internship experience.
• Strong ethics and integrity
• Strong written and verbal communication skills.
• Basic understanding of social media platforms and content creation tools.
• Ability to work collaboratively in a team environment.
• Detail-oriented with strong organizational skills.
• Flexibility needed for working within different time zones
• Enthusiasm for learning and developing new skills.
• Creative thinking and problem-solving abilities.

More about us:

At Takeda, we are transforming patient care through the development of novel specialty pharmaceuticals and best in class patient support programs. Takeda is a patient-focused company that will inspire and empower you to grow through life-changing work.

Certified as a Global Top Employer, Takeda offers stimulating careers, encourages innovation, and strives for excellence in everything we do. We foster an inclusive, collaborative workplace, in which our teams are united by an unwavering commitment to deliver Better Health and a Brighter Future to people around the world.

Empowering our people to shine:

Takeda is proud in its commitment to creating a diverse workforce and providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, parental status, national origin, age, disability, citizenship status, genetic information or characteristics, marital status, status as a Vietnam era veteran, special disabled veteran, or other protected veteran in accordance with applicable federal, state and local laws, and any other characteristic protected by law.

Job Summary

Reporting to the Director (Corporate Communications), the Executive/Senior Executive (Corporate Communications) will assist in managing the full spectrum of FAS/SPL communications functions including conceptualisation and implementation of creative media and communications strategies.

Duties & Responsibilities

• Assist the management in supervising the Corporate Communications team on achieving departmental KPIs
• Monitor, manage and provide critical analysis of daily media reports. Prepare weekly reports. Handle feedback and conflict resolution
• Analyse the nature and angle of media enquiries. Strategize and coordinate responses to media queries
• Establish good collaborative working relationships with various key media
• Develop and execute vibrant public relations plans to communicate key messages, generate publicity for FAS, SPL and our partners
• Solicit feedback and information from our stakeholders to enable the FAS and SPL to be more responsive to external expectations. Attend to external enquiries and complaints
• Research, evaluate and drive content development based on the content strategy. This includes bylines, social media content, and speaking content
• Implement social media strategies, monitor data from our digital platforms and discover insights to better and produce/curate content for platforms
• Ensure compliance of media directives by all departments, SPL clubs and standing committees. Manage all creative services and handle databases and library of materials
• Provide editorial support to the FAS and SPL websites
• Assist in FAS/SPL events with the overall objective of creating publicity for the organization and/or stakeholders
• Provide administrative support and any other assigned tasks to ensure smooth running of the department operations
• Undertake any other duties as assigned Director (Corporate Communications) and/or the General Secretary

We regret that only short-listed candidates will be notified.

Job Description:

• Report to the head of finance department.
• Full sets of accounting duties.
• Review monthly accounts.
• Liaise with auditors on statutory audit matters; tax agents/tax authorities on tax submission and tax queries.
• Ensure accurate preparation of the monthly closing and financial reports.
• Responsible for the management reporting, budgeting, and forecasting process.
• Review and enhance the financial management and reporting process.

Job Requirement:

• Hold a bachelor degree in accountancy/ finance or equivalent.
• Minimum 10 years of relevant working experience.
• Good communication and interpersonal skills.
• Bilingual language will be an advantage as we need to oftenly and effectively communicate with overseas stakeholders.
• Have experiences in working in large scale projects.
• Work in site container office.
• 6 days work.

Job Description:

• Monitor and verify that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Monitor and verify that environmental impacts are kept to a minimum during the planning and design and construction phases of the project.
• Conduct surveillance, monthly inspections and detailed audits.
• Compile and complete checklists in order to aid the surveillance and inspection requirements.
• Keep records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Recommend the issuing of penalties to the Engineers Representative for contravention of the EMP.
• Prepare and submit a Site Environmental Control Programme and Site Environmental Control Reports to the Occupier of the construction site.
• Identify environmental issues and recommend measures to rectify the irregularities.
• Prepare and submit a Site Environmental Control Report to the Occupier of the construction site.
• Assist the authorities to investigate environmental issues.
• Organise campaigns, training courses and other activities to develop and sustain the interest of workers in maintaining good environmental health standards.
• Any other duties /responsibilities as assigned by the Reporting Manager.

Job Requirement:

• Registered with National Environment Agency (NEA).
• Good knowledge of ECO Scheme and Environmental Laws.
• At least 5 years relevant working experience in construction industry; particularly civil works or in LTA project, or similar scale, complexity and nature of work will be advantages.
• Familiar with Occupational Health & Safety Management System.
• Good team player and able to work independently with positive attitude.
• Working Location- Tampines Area.
• 6 Days work week.

Job Descriptions

• Actively conduct risk assessments at project site and recommend measures to minimize and eliminate possible risks to any person.
• Monitoring and verifying that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Keeping records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Work closely with different teams to implement and maintain a strong safety regime on site.
• Conduct toolbox meeting and ensure the permit to work system in place.
• Work closely with different teams to implement and maintain a strong safety regime on site.vironment and practice of Company's QEHS Management System/WSH Act/Occupational safety and health at all times.
• Reporting to the WSH Manager, you will liaise closely with Project Managers on workplace safety, health and environmental issues to maintain a high level of safety at the sites.
• Ability to lead and advise on safety programs.
• Review and maintain site's WSH records.
• Other duties as assigned by management.

Job Requirements

• Degree in Safety, Health and Environment Management or other relevant subjects
• Holding Certificate in WSH Coordinator Course/ Building Construction Supervisors Safety Course and/or any Relevant Safety Certificates from any approved institutions will be preferred.
• Registered as Workplace Safety & Health Officer and Environmental Control Officer with at least five (5) years of post-registration and practical experience relevant to the scope of works of the contract.
• Good interpersonal skills.
• Ability to work under pressures in a fast pace environment.
• Working location at project site office, Pasir Ris.
• 5.5 working days
• Short notice period or can immediately onboard will be advantage.

Responsibilities:

· Generate new / potential clients and manage business working relationships with existing clients

· Achieve KPIs, ensuring clients’ satisfaction through development of strategic plans and effective communication

· Develop, maintain understanding of company products and services

· Provide timely and accurate sales forecasts and reports

· Work closely with Operations Team to ensure clients’ satisfaction

· Attend trade shows, conferences and other events if necessary

Requirements:

· Diploma in Engineering Fields / relevant certifications

· Proven sales track record

· Excellent communication and interpersonal skills

Please include in the CV

· Last drawn

· Expected salary

· Notice period

Interested candidates, please submit your CV to [email protected]

EA License No: 06C4642

EA Reg No: R1110624

All applications will be treated in strictest confidence and only short-listed candidates will be notified

Job Descriptions

• Actively conduct risk assessments at project site and recommend measures to minimize and eliminate possible risks to any person.
• Monitoring and verifying that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Keeping records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Work closely with different teams to implement and maintain a strong safety regime on site.
• Conduct toolbox meeting and ensure the permit to work system in place.
• Work closely with different teams to implement and maintain a strong safety regime on site.vironment and practice of Company's QEHS Management System/WSH Act/Occupational safety and health at all times.
• Reporting to the WSH Manager, you will liaise closely with Project Managers on workplace safety, health and environmental issues to maintain a high level of safety at the sites.
• Ability to lead and advise on safety programs.
• Review and maintain site's WSH records.
• Other duties as assigned by management.

Job Requirements

• Degree in Safety, Health and Environment Management or other relevant subjects
• Holding Certificate in WSH Coordinator Course/ Building Construction Supervisors Safety Course and/or any Relevant Safety Certificates from any approved institutions will be preferred.
• Registered as Workplace Safety & Health Officer and Environmental Control Officer with at least five (5) years of post-registration and practical experience relevant to the scope of works of the contract.
• Good interpersonal skills.
• Ability to work under pressures in a fast pace environment.
• Working location at project site office, Pasir Ris.
• 5.5 working days
• Short notice period or can immediately onboard will be advantage.

Job Descriptions

• Actively conduct risk assessments at project site and recommend measures to minimize and eliminate possible risks to any person.
• Monitoring and verifying that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Keeping records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Work closely with different teams to implement and maintain a strong safety regime on site.
• Conduct toolbox meeting and ensure the permit to work system in place.
• Work closely with different teams to implement and maintain a strong safety regime on site.vironment and practice of Company's QEHS Management System/WSH Act/Occupational safety and health at all times.
• Reporting to the WSH Manager, you will liaise closely with Project Managers on workplace safety, health and environmental issues to maintain a high level of safety at the sites.
• Ability to lead and advise on safety programs.
• Review and maintain site's WSH records.
• Other duties as assigned by management.

Job Requirements

• Degree in Safety, Health and Environment Management or other relevant subjects
• Holding Certificate in WSH Coordinator Course/ Building Construction Supervisors Safety Course and/or any Relevant Safety Certificates from any approved institutions will be preferred.
• Registered as Workplace Safety & Health Officer and Environmental Control Officer with at least five (5) years of post-registration and practical experience relevant to the scope of works of the contract.
• Good interpersonal skills.
• Ability to work under pressures in a fast pace environment.
• Working location at project site office, Pasir Ris.
• 5.5 working days
• Short notice period or can immediately onboard will be advantage.

Job Description

• Prepare, maintain and manage tender documents of BOQ, tender clarifications and unit prices etc.
• Measure of quantities from drawings.
• Prepare tender documents to subcontractor / vendor for quotations.
• Manage tender administration and oversee project works.
• Evaluation of price comparison and costing summary.
• Other quantity surveying related duties as assigned.

Job Requirements:

• Candidate must possess at least a Diploma/Degree in Quantity Survey/Architecture/lnterior Design or equivalent.
• At least 2 year(s) of working experience in the related field is required for this position.

Job Summary:

The Validation Engineer is responsible for ensuring that medical devices and manufacturing processes meet required quality standards and regulatory requirements. It includes lead and/or execute validation activities, including equipment, process, test method and software validation, to ensure that products are manufactured consistently and reliably in accordance with Good Manufacturing Practices (GMP) and other relevant standards.

Essential Duties and Responsibilities:

Include the following. Other duties may be assigned.

Validation Planning and Execution:

• Discuss and develop Master Validation Plan with the engineering / NPI team during the NPI process.
• Develop, implement, and maintain validation protocols and procedures for equipment, processes, and systems in accordance with regulatory requirements and industry best practices.
• Lead the execution of validation activities, including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ) for manufacturing equipment and processes.Establish and execute the Test Method Validation.
• Exercise authority to make technical decisions related to validation activities and methodologies.
• Perform risk assessments to identify critical areas and establish validation strategies.
• Ensure the re-validation and periodic review is conducted in a timely manner.

Documentation and Reporting:

• Prepare and review detailed validation documentation, including validation plans, protocols, reports, and change control documents.
• Maintain and update the Master Validation Plan as and when required.
• Authorize and approve validation documents and reports prepared by other team members.
• Maintain accurate and complete records of validation activities and results.

Compliance and Quality Assurance:

• Ensure validation activities comply with FDA regulations, ISO standards (e.g., ISO 13485), and other relevant guidelines.
• Support internal and external audits and regulatory inspections.
• Investigate and resolve validation-related issues, deviations, and non-conformities, with the authority to recommend corrective and preventive actions.

Cross-functional Collaboration:

• Collaborate with engineering, manufacturing, and quality assurance teams to ensure seamless integration of validated systems and processes.
• Provide validation expertise and exercise authority in decision-making during the development and implementation of new processes, equipment, and technologies.
• Oversee and support the training of personnel on validation procedures and best practices.

Continuous Improvement:

• Identify opportunities for process improvements and efficiency gains within the validation scope.
• Stay current with industry trends, technological advancements, and regulatory changes related to validation and medical device manufacturing.
• Implement improvements and best practices within the validation framework, with the authority to drive change.

Our esteemed client, an established MNC, is searching for a QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: 5-day work week
• Working Hours: 8:15 am to 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

As a bridge between the company's low-code PaaS, SaaS, and video conferencing products and customer needs, this role involves analyzing client pain points, designing tailored solutions, and driving their implementation. The role collaborates across departments to deliver value to customers and support business growth.

Responsibilities

• Collaborate with sales to engage in pre-sales communication, understand client needs, and provide forward-looking recommendations based on industry trends and product features.
• Design competitive and practical software solutions, including low-code application architecture, SaaS module configurations, and video conferencing integrations, supported by detailed implementation plans.
• Lead cross-departmental discussions to ensure technical feasibility and refine solution designs based on feedback.
• Deliver tailored product demonstrations, prepare comprehensive technical documentation, and support market promotion efforts through industry events and client presentations.
• Provide technical guidance during implementation, address project adjustments, and ensure solutions meet customer expectations.
• Communicate market trends and client feedback to R&D for continuous product improvement.

Requirements

• Diploma or higher.
• 5+ years of experience in software solution design, with expertise in low-code PaaS, SaaS, or related fields.
• Proficiency in low-code architecture, SaaS features, and multi-tenant principles.
• Strong technical writing and presentation skills.
• Proven ability to deliver customized solutions for diverse industries.

As a bridge between the company's low-code PaaS, SaaS, and video conferencing products and customer needs, this role involves analyzing client pain points, designing tailored solutions, and driving their implementation. The role collaborates across departments to deliver value to customers and support business growth.

Responsibilities

• Collaborate with sales to engage in pre-sales communication, understand client needs, and provide forward-looking recommendations based on industry trends and product features.
• Design competitive and practical software solutions, including low-code application architecture, SaaS module configurations, and video conferencing integrations, supported by detailed implementation plans.
• Lead cross-departmental discussions to ensure technical feasibility and refine solution designs based on feedback.
• Deliver tailored product demonstrations, prepare comprehensive technical documentation, and support market promotion efforts through industry events and client presentations.
• Provide technical guidance during implementation, address project adjustments, and ensure solutions meet customer expectations.
• Communicate market trends and client feedback to R&D for continuous product improvement.

Requirements

• Diploma or higher.
• 5+ years of experience in software solution design, with expertise in low-code PaaS, SaaS, or related fields.
• Proficiency in low-code architecture, SaaS features, and multi-tenant principles.
• Strong technical writing and presentation skills.
• Proven ability to deliver customized solutions for diverse industries.

As a bridge between the company's low-code PaaS, SaaS, and video conferencing products and customer needs, this role involves analyzing client pain points, designing tailored solutions, and driving their implementation. The role collaborates across departments to deliver value to customers and support business growth.

Responsibilities

• Collaborate with sales to engage in pre-sales communication, understand client needs, and provide forward-looking recommendations based on industry trends and product features.
• Design competitive and practical software solutions, including low-code application architecture, SaaS module configurations, and video conferencing integrations, supported by detailed implementation plans.
• Lead cross-departmental discussions to ensure technical feasibility and refine solution designs based on feedback.
• Deliver tailored product demonstrations, prepare comprehensive technical documentation, and support market promotion efforts through industry events and client presentations.
• Provide technical guidance during implementation, address project adjustments, and ensure solutions meet customer expectations.
• Communicate market trends and client feedback to R&D for continuous product improvement.

Requirements

• Diploma or higher.
• 5+ years of experience in software solution design, with expertise in low-code PaaS, SaaS, or related fields.
• Proficiency in low-code architecture, SaaS features, and multi-tenant principles.
• Strong technical writing and presentation skills.
• Proven ability to deliver customized solutions for diverse industries.