1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Job Description:

• Ensure at all times that fire safety requirements contained in the Emergency Response Plan are complied with;
• Supervise the maintenance of all fire safety works in the premises;
• Ensure at all times that the occupant load of any part of any building does not exceed the capacity prescribed under the Fire Code;
• Conduct daily checks within the premises and remove or cause to be removed any fire hazard that is found within the premises;
• Prepare and execute the Emergency Response Plan for the premises and distribute the Emergency Response Plan to the occupants of the premises; (ii) conduct fire drills for the occupants of the premises at least twice in every calendar year or on such occasion as may be directed by the Commissioner;
• Ensure that all occupants are familiar with the means of escape located within the premises;
• Prepare fire safety guidebooks for the occupants of the premises; train, co-ordinate and supervise the Company Emergency Response Team for the premises in first-aid, fire-fighting and evacuation in the event of fire or other related emergencies;
• Train the occupants in the premises in first aid, firefighting and evacuation in the event of fire or other related emergencies;
• Co-ordinate and supervise the occupants within the premises in firefighting and in evacuation in the event of fire or other related emergencies;
• Conduct at least 2 Table-Top Exercises within the premises each year and to evaluate, together with the Fire Safety Committee, the effectiveness of the Arson Prevention Plan and the Emergency Response Plan for those premises;
• Prepare and implement the Arson Prevention Plan for the premises;
• Organise campaigns, training courses, competitions, contests and other activities which will develop and maintain the interest of the occupants within the premises in establishing a fire safe environment;

Requirement:

• Must have valid Fire Safety Manager certification
• Preferably with 2 to 3 years' experience as a Fire Safety Manager or related experience in a similar capacity
• Proficient in Microsoft Word, Excel and Powerpoint

Key Responsibilities:

• Oversee and manage construction activities related to Dwall construction, deep excavation, C&C tunnels, drainage systems, pavement construction, taxiways, and runways.
• Ensure compliance with Singapore standards and regulations throughout the project lifecycle.
• Conduct regular inspections to ensure quality control and adherence to project specifications.
• Coordinate with contractors, engineers, and other stakeholders to resolve technical issues and ensure smooth project progress.
• Monitor and report on project progress, including budget and schedule updates.
• Implement safety protocols and ensure a safe working environment for all personnel.

Requirements:

• Bachelor's degree in Civil Engineering or .
• Minimum of 3 years of experience as a Resident Technical Officer in construction projects, preferably with experience in Singapore.
• Proficiency in project management and construction supervision.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.

Job Description & Requirements

• Responsible for the implementation and monitoring of Workplace Safety & Health and Environment Management Systems at work sites.
• Conduct regular WSH inspections and follow-up actions to ensure safety compliance
• Ensure all Health & Safety policies, procedures, rules and regulations are adhered to and are regularly reviewed, updated and communicated.
• Ensure the Company meets its statutory obligations in all areas pertaining to health, safety and welfare at work, including statutory training and reporting
• Ensure the completion and regular review of risk assessments for all work equipments and operations
• Ensure all accidents are documented, investigated and recommended improvements implemented.
• Coordinate the development of health & safety policies, systems of work and procedures.
• Inspect project sites to ensure safety measure are being carried out at all times

Requirements:

• Possess relevant safety certificates (Eg Advanced Certificate in WSH, Safety Officer's Course or equivalent)
• Minimum 3 years of relevant working experience in Building Construction
• Familiar with ISO45001, ISO 9001 & ISO 14001

• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site
• Contract period Jan’25 – Jun’25

• Troubleshoot and carry out minor repairs (electrical, plumbing, builder, etc) for the building and related facilities.
• Supervise sub-contractors who carry out approved repair works and scheduled maintenance in the building.
• Assist Facilities Executive & officer to execute preventive maintenance regime and/or ad-hoc upgrading project and monitor the work progress.
• Assist Facilities Executive & officer to attend to tenant’s feedback on the building and related facilities.
• Provide guidance and coaching to junior staff when required.
• To carry out routine servicing in M&E systems (i.a.w. operation requirements).
• To provide initial fault response reported by client.
• Updating and follow up on completed/outstanding faults status.
• To supervise specialist contractors maintenance activities (as & when required).
• To carry out shift duties.
• To carry out additional tasks as instructed by company/ immediate supervisor.

Candidate must process good interpersonal skill, processing of diploma will be preferred with 3 years working experience, knowledge of excel , experience in purchasing of materials at construction site and helping out in the ad hoc and administration in paper works.

Job Responsibilities

• To support the construction team for M&E engineering works.
• Planning/scheduling and coordination of M&E works.
• Project coordination, supervision, and monitoring of the progress of site work.
• Coordinate M&E engineering work and work closely with other department staff to resolve site discrepancies and technical issues.
• Oversee and ensure works are carried out in accordance with the approved drawings, materials and method statements.
• Ensure quality work in order to achieve CONQUAS and/or QM requirements
• Liaise with clients, consultants, relevant authorities, and sub-contractors on M&E issues.
• Handle any other ad-hoc duties and tasks assigned.

Requirements

• Degree in Mechanical & Electrical Engineering or related fields. PE Board recognized degree is preferred
• Minimum 8 years of relevant experience in the construction industry
• Proficient in Autodesk Revit or BIM software

Job Qualifications:

Willingness to work in non-climate-controlled conditions (heat, cold, outdoors)

Ability to lift heavy materials and equipment

Willingness to work overtime

Willing to work midnight shift

Excellent customer service skills

Min 2 Years relevant working experiences

Secondary School / high school / diploma or equivalent

Carpentry and renovation experience a plus

Job Responsibilities:

Cut tiles and shape them properly to ensure they fit around obstacles and in tight corners and odd spaces using power and hand tools

Form tile beds using concrete, plaster, mastic, cement glue or mortar utilizing tools such as screeds, brushes and trowels

Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise

Cut, install, polish and surface granite and marble and ensure accuracy during the installation process for lasting results

Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly

Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms

Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break or damage tiles

Follow blueprints precisely and mark and measure surfaces that need to be tiled to determine how to go about job

Job Description

• Reviewing construction plans and preparing quantity requirements.
• Scrutinizing maintenance and material costs, as well as contracts to ensure the best deals.
• Liaising with site managers, clients, contractors, and subcontractors.
• Preparing reports, analyses, contracts, budgets, risk assessment, and other documents.
• Advising manager on improvements and new strategies.
• Keeping track of materials and ordering more when required.
• Documenting any changes in design and updating budgets.
• Establishing and maintaining professional relationships with external and internal stakeholders.
• Traveling from the office to various sites as required.
• Managing Work Insury Insurance Claim process
• Liaising with Stakeholder Regards to project and workmen injuries issues

Quantity Surveyor Requirements:

• Bachelor's degree in quantity surveying, engineering, management, or similar.
• Construction estimating or finance experienced is advantageous.
• Strong analytical and critical thinking skills.
• Sound knowledge of construction.
• Excellent negotiating and interpersonal skills.
• Ability to organize, plan, and strategize.
• Great networking abilities.

Job Description

• Reviewing construction plans and preparing quantity requirements.
• Scrutinizing maintenance and material costs, as well as contracts to ensure the best deals.
• Liaising with site managers, clients, contractors, and subcontractors.
• Preparing reports, analyses, contracts, budgets, risk assessment, and other documents.
• Advising manager on improvements and new strategies.
• Keeping track of materials and ordering more when required.
• Documenting any changes in design and updating budgets.
• Establishing and maintaining professional relationships with external and internal stakeholders.
• Traveling from the office to various sites as required.
• Managing Work Insury Insurance Claim process
• Liaising with Stakeholder Regards to project and workmen injuries issues

Quantity Surveyor Requirements:

• Bachelor's degree in quantity surveying, engineering, management, or similar.
• Construction estimating or finance experienced is advantageous.
• Strong analytical and critical thinking skills.
• Sound knowledge of construction.
• Excellent negotiating and interpersonal skills.
• Ability to organize, plan, and strategize.
• Great networking abilities.

Job Qualifications:

Willingness to work in non-climate-controlled conditions (heat, cold, outdoors)

Ability to lift heavy materials and equipment

Willingness to work overtime

Willing to work midnight shift

Excellent customer service skills

Min 2 Years relevant working experiences

Secondary School / high school / diploma or equivalent

Carpentry and renovation experience a plus

Job Responsibilities:

Cut tiles and shape them properly to ensure they fit around obstacles and in tight corners and odd spaces using power and hand tools

Form tile beds using concrete, plaster, mastic, cement glue or mortar utilizing tools such as screeds, brushes and trowels

Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise

Cut, install, polish and surface granite and marble and ensure accuracy during the installation process for lasting results

Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly

Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms

Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break or damage tiles

Follow blueprints precisely and mark and measure surfaces that need to be tiled to determine how to go about job

Responsibilities:

1. Project and Maintenance Support:
   • Participate in projects and maintenance services involving CCTV systems, access control systems, public address systems, alarm systems, and server/network infrastructure.
   • Provide technical assistance and support as required.
2. System Installation and Configuration:
   • Install, implement, configure, and test system/storage equipment and related setups.
   • Set up and integrate access control systems, including electronic locks, card readers, biometric scanners, and control panels.
3. Preventive Maintenance and Inspections:
   • Conduct routine inspections of access control systems.
   • Perform preventive maintenance to ensure optimal system performance and reliability.

Requirements:

• Proficiency in installing and configuring electronic security systems.
• Strong understanding of server and network infrastructure.
• Excellent troubleshooting and problem-solving skills.
• Ability to work independently and in a team-oriented environment.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Manage all job site activty,arrange for all workers do work nicely and give them understand what they should need to do at their work site,some time need to do electrical trunking cabaleing work.mangae main-con derection and attend meeting with the main contractor.

Cut, install, polish and surface granite and marble and ensure accuracy during the installation process for lasting results

Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly

Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms

Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break or damage tiles

Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break or damage tiles

Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise

• Request quotation and price negotiation with suppliers.
• Prepare purchase order, ensure timely delivery and follow through the complete procurement cycle.
• Responsible for construction material / machinery purchase and to maintain with proper record for receipts and issuance.
• Matching of supplier’s invoices with supporting documents such as PO & DO.
• Generate monthly purchasing report for management.
• Liaise with local and overseas suppliers.
• Administrative tasks on and ad-hoc basis.
• Take sufficient steps to minimize project risks.
• Handle the planning and preparation of company contracts.
• Liaise with and support the Project Manager to ensure the project is executed safely and properly.
• Ensure compliance with the company’s work health and safety policies, standards and procedures.
• Prepare monthly project reports and make presentations at meetings.
• Support negotiations of claims, manage contractual changes and resolve disputes or conflict resolution with Contractors.
• Assess and prepare claims from suppliers.
• Ensure project members use the contract correctly.
• English speaking, writing, and reading required.
• Candidate must possess at least Secondary School/O Level, Higher Secondary/Pre-U/'A' Level, Diploma, Advanced/Higher/Graduate Diploma Understanding of procurement process, Good Communication Skills

• Troubleshoot and carry out minor repairs (electrical, plumbing, builder, etc) for the building and related facilities.
• Supervise sub-contractors who carry out approved repair works and scheduled maintenance in the building.
• Assist Facilities Executive & officer to execute preventive maintenance regime and/or ad-hoc upgrading project and monitor the work progress.
• Assist Facilities Executive & officer to attend to tenant’s feedback on the building and related facilities.
• Provide guidance and coaching to junior staff when required.

Job Description:

• Supervising of Geotechnical Instrumentation and Monitoring Works
• Supervising of Concrete casting work (Lean and In-situ) and steel structure work for shelter
• Supervising / Conducting of In-site mixed soil testing, sampling, mixing and sending to Laboratory
• Coordinating with Client, Sub-contractor for the soil mixing works related items
• Plan, scheduling and Supervising of soil mixing, testing, sampling and sending to Laboratory
• Supervising of traffic control for the accessibility of ADTs, Excavators and Crawler Cranes
• Assist to the Section Manager and Construction Managers on the ad-hoc jobs
• Safety Promote at site

Job Requirements:

• Bachelor in Civil / Geotechnical Engineering or Equivalent Degree
• Minimum 10 years of experience in Civil and Soil Mixing Works
• Able to work on alternate night shift work
• Autocad and MS office knowledge is a must
• Able to lead the site team and coordinate with the Client's Engineer and RTO

Job Description

· Preparation of precast shop drawings including plans, elevations, sections, details, anchorage, starter bar layout etc.

· Ensure and check that all drawings are done accurately

· To study all architectural and structural drawings necessary for the project

· Able to study and prepare fine details in shop drawings

· Able to use both 2D and 3D software

· Manage and update Master Drawing List

· Controls information coming in from Main Contractors and Consultants

· Prepare as built drawings upon completion of project

· Prepare documents and drawings for ST submission

· Housekeeping of project folders

Requirements

· Minimum ITE or Diploma certificate in BIM or Architectural/ Structural discipline

· Preferably 1 year experience in construction firm

· Preferably experience in 3D Cad, Rhino would be an advantage

· Good interpersonal and communication skills

· Preferably Singaporean/ PR

Benefits

· 5 days work week 8:30 to 18:00

· 2 days can be work from home if situation allows

· Training will be provided to use 3D precast software

· Salary commensurate with experience

· Salary range $2700 to $3600

• Reviewing construction plans and preparing quantity requirements.
• Liaising with site managers, clients, contractors, and subcontractors.
• Scrutinizing maintenance and material costs, as well as contracts to ensure the best deals.
• Preparing reports, analyses, contracts, budgets, risk assessment, and other documents.
• Advising managers and clients on improvements and new strategies.
• Keeping track of materials and ordering more when required.
• Documenting any changes in design and updating budgets.
• Establishing and maintaining professional relationships with external and internal stakeholders.
• Liaise with Reporting Superior and Project Managers on costing and variation works including final account with Consultants
• Attendance of site meetings /site visit where necessary.
• Generally covering the scope of a Quantity Surveyor from Pre to Post contract Works (e.g. Tendering to final account).

Job Duties

• Reports to Project Manager.
• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programs.
• Liaise with Consultants on technical issues and coordinate the site activities with subcontractors.
• Lead a group of supervisors and ensure site progress is on schedule.
• Maintain quality standards and carry out site inspections.
• Ensure compliance with EHS requirements, regulations, and best practices throughout the project lifecycle.
• Provide technical guidance during project design and construction phases,resolving technical issues promptly and effectively.
• Support the management of manpower, materials, and equipment to optimize productivity and efficiency.

Requirements

• Recognized Degree in Civil / Structural Engineering or equivalent. PE Board recognized degree is preferred.
• At least 6 years’ experience in building or civil engineering project for senior role.
• Minimum 2 complete cycle (piling to roof) for HDB projects.
• Experience in architectural works will be an advantage.
• Technical competence.
• Knowledge in BIM/VDC is an advantage.
• Positive attitude and good team player.
• Demonstrates a sense of urgency.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

• Answer and direct phone calls
• Organize and schedule appointments and meetings
• Maintain contact lists
• Produce and distribute correspondence memos, letters, faxes, and forms
• Assist in the preparation of regularly scheduled reports
• Develop and maintain a filing system
• Order office supplies
• Book travel arrangements
• Submit and reconcile expense reports
• Provide general support to visitors
• Provide information by answering questions and requests
• Take dictation

1. To liaise with building Main Con on Archtecture works and details for projec coordination

2. To liaise with sub con on project details and installation issued

3. To work on project schedule and minor change on the details if needed minor changes on the details drawings.

4. To liaise with builder Safety officer for the safety issued.

5. To liaise with office for Miscellaneous site issued.