The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Provide 24x7 support for all Diffusion Wet Equipment Tools and Issues

Task:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach junior engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 7 years of relevant work experience in Diffusion Wet / Wet Etching Equipment
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Overview:

As a 5G System Test Engineer, you will be involved in the testing and verification of 5G communication systems, ensuring our products meet international standards and customer requirements, contributing to the stable and efficient operation of 5G networks. You will have the opportunity to gain deep insights into core 5G technologies, master advanced testing methods and tools through hands-on experience, laying a solid foundation for your career.

Core Responsibilities:

1. Participate in functional testing, performance testing, compatibility testing, and stability testing of 5G communication systems to ensure they meet design requirements and industry standards.
2. Design and execute test cases based on testing needs, record test results, analyze, and report issues found during testing.
3. Assist the development team in reproducing and locating issues found during testing, tracking the progress of issue resolution until closure.
4. Learn and master the latest 5G testing standards and specifications, continuously optimizing testing processes and methods to improve testing efficiency and quality.
5. Participate in the setup and maintenance of the testing environment, including the installation, configuration, and upgrading of testing software and hardware.
6. Collaborate with the project team in the formulation and review of testing plans, ensuring testing activities are completed on time and with high quality.

Qualifications:

Education Background:

• Bachelor's degree or above in Computer Science, Electronic Information Engineering, Communication Engineering, or related fields, fresh graduate.

Professional Knowledge:

• Familiar with basic knowledge in communication principles, digital signal processing, and computer networks; prior knowledge of 5G technology is preferred.

Skills:

• Possess good logical thinking and problem-solving abilities; understand basic software testing processes and methods; have a programming background (such as Python, C/C++) is a plus.

Attitude and Qualities:

• Strong sense of responsibility, attention to detail, good teamwork spirit and communication skills; willing to continuously learn new knowledge and adapt to a fast-paced work environment.

Roles and Responsibilities

Cluster Setup and Maintenance:

• Install, configure, and maintain big data platforms like Hadoop Clusters, Elastic Search, Spark, Kafka, Hive etc.
• Set up and manage distributed file systems (HDFS) and NoSQL databases (HBase, Cassandra).
• Ensuring high availability and reliability of Hadoop, Kafka and Elasticsearch Clusters.

Performance Optimization:

• Monitor system performance, fine-tune jobs, and optimize cluster utilization.
• Manage and resolve performance bottlenecks in big data environments.

Security Management:

• Implement data security policies, user authentication (Kerberos), and access control (Ranger, Knox).
• Regularly review and plan patch systems to ensure data integrity.
• Apply updates, patches, and version upgrades to all managed systems.
• Ensuring the backward compatibility and minimal downtime during upgrades.

Backup and Recovery:

• Plan and implement backup and recovery strategies for big data environments.
• Develop disaster recovery solutions and test failover scenarios.

Workflow Automation:

• Design and implement workflows using tools like Apache Oozie or Apache Airflow.
• Automate cluster management tasks like upgrades and scaling.
• Developing shell scripts and Ansible Playbooks to automate routine tasks, including monitoring, backups, and deployments.

Monitoring and Support:

• Monitor logs, metrics, and system health using tools like Ambari, Cloudera Manager, or Prometheus.
• Provide 24/7 on-call support for production systems and resolve incidents.

Collaboration:

• Work closely with data engineers and developers to support ETL pipelines and data processing jobs.
• Collaborate with stakeholders to ensure big data systems meet organizational needs.
• Working transversally with other teams to guarantee high data quality and availability.

Cloud migration

• Migration planning from On-premises to GCP & AWS cloud

Required Skills and Qualifications

Technical Skills:

• Strong knowledge of big data ecosystems (Hadoop, HDFS, YARN, Hive, HBase, Spark, Kafka and Elastic Search).
• Proficiency in Linux/Unix system administration.
• Experience with monitoring tools like Nagios, Grafana, or Splunk, HPOMI.
• Scripting skills in Python, Ansible, Shell, or Bash.
• Familiarity with cloud platforms (AWS, Azure, GCP) and their big data services.

Soft Skills:

• Strong problem-solving and analytical abilities.
• Effective communication and collaboration skills.
• Ability to handle high-pressure production environments.

Preferred Experience

• 8-9 years of experience in big data administration or similar roles.
• Hands-on experience in scaling and managing large, big data clusters in production environments.

Interested applicants please send your resume in MS Word format and attention it to Tan Joanna (R1104661)

Shortlisted candidates will be notified

Data provided is for recruitment purposes only

www.ambition.com.sg

EA Registration Number: R1104661

Business Registration Number: 200611680D. Licence Number: 10C5117

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a ISEP Senior Engineer to be part of our Facilities Department diverse team of talent. You will be responsible to provide support pertaining to Environmental, Health and Safety to wafer fabrication for the company

What you will be working on:

• Familiar with WSH Act, Fire Safety Act and ISO 45001, ISO14001, SS651 so as to ensure compliance to these requirements, including Statutory Equipment & Licenses.
• Ensure that the EHS Management Systems are implemented, maintained, and compliant with all applicable local legislation.
• Ensure safety case implementation and mitigative measures for Safety-Critical Events (SCE) in Major Hazard Industries (MHI).
• Develop, maintain, and periodically test emergency response plans, conduct CERT audits, and lead emergency drills including training, maintain procedure and implement all the requirement.
• Compliance with regulatory and permit/ licenses requirements, through Monitoring & Measurement and standard, work to ensure proper management and accurate reporting.
• Implement of EHS programs to improve awareness and performance towards established goals actively.
• Manage EHS incidents and non-conformance investigations, ensuring corrective and preventive actions are tracked and closed.
• Schedule and coordinate EHS related meeting, inspection and audit (External / Internal)
• Manage, schedule and coordinate EHS trainings including training and revision of training materials.
• Manage EHS reports, EHS bulletin/Alerts Manage and other communications
• Revise and write EHS procedures and work instructions.
• Manage work permit system and contractors management.
• Any other duties as assigned by Manager

More about you:

• Minimum Diploma / Bachelor in Science or Engineering in Environmental, Chemical or equivalent
• Familiar with local regulatory requirements related to workplace safety and health, and all other aspects of safety.
• Strong understanding of chemical safety regulations, ISO45001, ISO14001 and SS651
• Certificates in EHS Internal Auditing (ISO 45001, ISO 14001, SS651) will be significantly advantageous
• Registered Workplace Safety and Health Officer and Fire Safety Manager

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities:

• Solutions delivered on time and on budget.
• Perform maintenance on time.
• Provide timely and satisfactory issues resolutions.
• Conduct training, presentation to internal and external customers.
• Manage internal and external customers.

During System Implementation Phase:

• At site survey to ensure infra and network is in accordance to solutions requirements.
• Install, Configure solutions at sites.
• Manage User Acceptance testing at sites.
• Conduct User training at sites.
• Document handover items for customers at sites.

During Maintenance Phase:

• Ensure all delivered solutions are in operation.
• At site or remote to support and troubleshoot issues related to the delivered solutions.
• At site to perform solutions preventative action, monthly patching or upgrade.
• At site testing and delivery of Samsung devices.
• Work closely with the HQ Technical Support & R&D for critical issues escalation and VOC compilation.

Requirement:

• Diploma or Degree in Computer Science or Information System related fields
• Server and/or cloud certificate is highly preferred.
• At least 2 years of experience in network administration, QA testing, software installation and maintenance.
• Knowledge in the use of VM software and system OS (Windows Server, JAVA, Apache Tomcat, Redhat, Ubuntu, etc.).
• Knowledge in the configuration management such as AD, CA, DNS etc.
• Knowledge in the use of database: MSSQL, MYSQL etc.
• Knowledge on Cloud (i.e., AWS, Azure, or similar) and on-premises infrastructure deployment.
• Excellent problem solving, and analytical thinking.
• Good at documentation (specification, user guide creation)
• Excellent communication skills; able to present technical topics to non technical audience.
• Subject to government G50 clearance (compulsory)

Preferred Qualification:

• Knowledge in MDM related solutions and technology (such as Samsung Knox, Android Enterprise, VMWare Workspace ONE, MobileIron, Citrix Endpoint Management, Microsoft Intune, and etc) are a plus.
• Programing and software development skill in Java, XML, HTML, Android development are a plus.
• Project Management experience and/or certificate.
• Experience in designing cloud system environment, able to manage cloud resource with automation.
• Ability to take up a new technology and perform development based on client requirements.

Responsibilities:

Design mould, tooling and test socket solutions based on customer specifications, semiconductor packages, and testing requirements.

Utilize CAD tools (such as CREO, AutoCAD, SolidWorks, or similar) to create detailed 3D models and technical drawings.

Ensure designs meet mechanical, thermal, and electrical performance requirements for high-precision semiconductor testing.

Select appropriate materials, tolerances, and manufacturing methods to ensure product durability, precision, and cost-effectiveness.

Able to carry out the R&D of new test socket whenever the market trend is needed.

Work closely with cross-functional teams, including Sales, Product Development, Process Engineering, and Manufacturing, to refine designs and ensure compatibility with testing equipment and processes.

Provide technical support to manufacturing teams during prototyping, production, and assembly to resolve any design-related issues.

Engage with customers and vendors to ensure all moulds, tooling and test socket solutions meet functional requirements and industry standards.

Oversee the prototyping phase, ensuring that initial designs are built and tested effectively.

Lead or participate in validation and testing efforts to ensure the tooling and test sockets perform under specified conditions (e.g., temperature, mechanical stress, electrical signals, thermodynamics).

Analyse test data and provide feedback for continuous improvement in design and materials.

Continuously seek to improve design efficiency and product performance, optimizing socket contact interfaces, reducing testing time, and improving signal integrity.

Innovate by introducing new design techniques, materials, or technologies that improve the quality, reliability, and cost of the test sockets and tooling solutions.

Stay up-to-date with the latest semiconductor technologies and testing methodologies to ensure cutting-edge designs.

Develop and maintain comprehensive documentation for all designs, including detailed engineering drawings, materials specifications, and manufacturing processes.

Create user manuals and technical documentation to guide customers and internal teams on the proper usage of tooling and test sockets.

Qualifications:

At least Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related field.

5+ years of experience in mould & tooling design AND test socket design within the semiconductor industry or a related field.

Proven experience in designing test sockets, jigs, fixtures, and other related components for semiconductor testing.

Proficiency in & Hands-on experience with CAD software for mechanical design and simulation (e.g., CREO, SolidWorks, or AutoCAD).

Understanding of semiconductor testing processes and requirements (ATE – Automated Test Equipment).

Strong mechanical design and analytical skills.

Knowledge of materials science, particularly in relation to thermal management, wear resistance, and conductivity in socket designs.

Familiarity with signal integrity, high-speed test interfaces, and electrical characteristics relevant to test socket performance.

Excellent problem-solving skills, with the ability to identify and address complex technical challenges.

Strong attention to detail and precision in design and documentation.

Ability to work independently and as part of a cross-functional team.

Familiarity with industry standards for semiconductor testing (JEDEC, EIA, etc.).

Effective communication skills for both internal team coordination and customer interactions.

Willingness to travel occasionally for customer visits, manufacturing site inspections, or vendor meetings.

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Tasks:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• ecome the technical Expert for the respective machine specialization.
• ● Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Materials / Material Sciences Engineering
• 5 years of relevant work experience in Etch Equipment in the semiconductor industry
• LAM tools preferred
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

NetVirta is a fast growing, venture-backed startup in the fashion fit technology space. If you’ve had difficulty shopping online because you couldn’t find clothing or footwear that fit, you’ve experienced the problem we address. It’s an issue that troubles shoppers around the world and NetVirta is uniquely positioned to solve it.

Founded by two MIT graduates and located in Boston and Singapore, NetVirta is the world’s leading fit technology provider for medical, retail and sports equipment brands, helping customers order the right size with precision 3D body scanning. We began serving the medical industry in 2013, helping doctors scan medical patients to create custom-fit orthotics and prosthetics. In 2017, we expanded to enable NFL and NCAA football players to obtain custom-fit helmets. Fast forward to 2022, NetVirta’s closed deals with multiple clothing and footwear brands in North America, Europe, and Asia.

We are proud to be certified as Great Place to Work® in Singapore.

What can you expect?

We are seeking a Machine Learning Engineer / Researcher who will assist the development and deployment of advanced machine learning models to power our recommendation system and search engine. In this role, you will have opportunities to work with state-of-the-art AI techniques, including large language and vision models, integrating them to complement our recommendation system and search architecture. You will also play a vital role in maintaining and evolving our AI systems throughout the different growth stages.

Responsibilities

• Build scalable recommendation and search engines tailored to fashion content.
• Lead the design, development, and optimization of machine learning models, especially in the context of fashion recommendation systems and search engines.
• Integrate various techniques to help tackle cold start problems, including

1. Content-based recommendation
2. Leveraging implicit user interaction signals
3. Large language (vision) models

Required Skills & Experience

• Bachelor’s, Master’s or PhD degree in Machine Learning, Computer Science, or a related field.
• Experience with Python and machine learning frameworks (eg., TensorFlow, PyTorch).
• Prior hands-on experience with recommendation & search systems and knowledge of its key components (retrieval, re-ranking, cold-start, etc).
• Familiarity with using large language models and computer vision techniques.
• Ability to collaborate in a fast-paced, cross-functional environment with strong communication and teamwork skills.

Good-To-Have

• Knowledge of reinforcement learning (e.g. multi-armed bandits and related techniques).
• Prior industry experience with A/B tests in the context of recommendation systems.
• Good understanding of the infrastructure behind large-scale recommendation and search systems.

What else is awaiting you?

• Career development opportunities, like mentoring, career exploration through a Japanese concept called Ikigai.
• Learning is fundamental to our culture, your growth together with Netvirta's are paramount to how we can transform the industry.
• Besides hard work, we value your well-being and want you to have fun too! Attractive compensation and benefits as well as engagement and welfare activities awaits you.
• Work alongside with friendly colleagues in a positive environment.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Equipment Engineer to be part of our Diffusion Department diverse team of talent.

Responsibilities:

• Responsible for daily operations in the Diffusion CMP Equipment Module.
• Perform corrective & preventive maintenance on equipment to maintain good quality & productivity performance.
• Provide 24×7 support for troubleshooting equipment & problem solving in Factory operations floor.
• Maintain documentations for equipment installation, maintenance and troubleshooting procedures for reference purposes.
• Develop continuous improvement to enhance equipment reliability and cost of ownership.
• Drive innovation in factory automation, processes and systems to improve productivity.
• Coordinate, supervise & develop a team of high performance equipment engineers.

Requirements:

• Degree in Chemical/Electrical & Electronics/Materials/Mechanical/Microelectronics/Physics or equivalent
• Familiar with Mirra polishing tools and DNS Scrubber
• Highly motivated & strong team player
• Possesses good communication and interpersonal skills
• Quality 1st mindset & strong analytical, problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• Position : Site Engineer - Up to $4,200 - Seletar
• Location : Seletar
• Working hours : 5 Days Work Week – Monday to Friday: 8.30AM to 6.00PM
• Salary (commensurate with experience): Up to $4,200 + Performance Bonus + 14 Days Annual Leave
• Duration : Permanent
• Industry : Aerospace

Responsibilities:

• Create solutions to complex technical problems in life science, Power, water treatment, chemical and petro-chemical, shipyard and oil and gas plants.
• Do field/ bench Calibration of measuring instruments like Pressure, Temperature, Flow, radar level, analyzer, wireless and collect data
• Calculate calibration range, mA, Freq, required output and accuracy before doing calibration and record the result during calibration
• Analyze and compile technical and statistical information and prepare report
• Maintain accurate engineering documents

Requirements:

• Minimum Diploma in Electrical / Electronic / Instrumentation
• Minimum 3 years of relevant experience in the same field
• Knowledge relating to Mechanical and Measuring Instruments
• Technical report writing and able to read the schematic diagrams
• Preferably with Class 3 Driving License
• Bilingual in English & Mandarin to liaise with Chinese associates who can only speak mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Position : M&E Coordinator/Engineer (A&A Industry) - Up to $5,500 - All Welcome
• Location : Based on Project Sites
• Working hours : Monday to Saturday | 8am to 6pm (Saturday working hours based on site)
• Salary (commensurate with experience) : Up to $5,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Construction Sector - A&A / Building Works

Main Responsibilities:

• Assist M&E Manager in coordinating M&E specific works on site.
• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion.
• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality.
• Responsible for conducting QA/QC inspection, managing RE, RTO and responsible for clearing OA/QC inspections to meet wi construction schedule.
• Responsible for variation order cost collection, cost verification of the VO works and make necessary recommendation of VO prices.
• To check, evaluate and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors progress payments incl. instruction of progress substantiation document preparation by sub-contractors and vendor
• Responsible for site implementation of safety standards to comply with IMS safe work methods.
• Responsible for attendance to daily site co-ordination meeting and provide detail co-ordination with sub contractors.

Requirements:

• Minimum of Diploma in M&E Engineering or relevant; with at least 2 years of experience.
• Willing to work on weekends if site required.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Position : ALL WELCOME - Technical Sales Engineer (NO EXP REQUIRED/TRAINING PROVIDED) - Up to $4500
• Location : West – Bukit Batok Crescent
• Working hours: Monday to Friday | 8.30am to 5.30pm
• Salary (commensurate with experience) : Up to Basic of $4,500 + Average Incentives of $1,000 + AWS + Variable Bonus + Transport Reimbursement/Allowance + Mobile Phone Allowance + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Industrial Automation

Main Responsibilities:

• Responsible for preparing quotations, proposal according to customer’s requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analysing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products..

Requirements:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/Mechanical
• No experience required/ Entry level candidates are welcome to apply
• Training on products will be provided
• Bilingual in English and Mandarin to communicate with colleagues who can only speak in mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

This role is similar to a (junior) chief of staff to the Co-founder (COO&CFO) of a Pre-A startup. Notwithstanding the job description listed below, your role would be anything and everything that the Co-founder is currently in charge of. DO NOT apply if you want a well defined routine, job scope, and if you prefer to know what will happen in the coming month. Also do not apply if you only want to do sales, strategy, and other "high level" stuff. There will be a mixture of everything that is not too technical (everyone else in the company is highly technical) and I need someone to offload my work. There will be times when you have to work on construction sites like everyone else in the company. It is hot, dirty, dusty, and overall not a pleasant experience. We do anything and everything necessary based on the ever changing situation. Either engineers with a strong business acumen or business school graduates with reasonable engineering interest can apply.

Fabrica AI is creating a future where ideating and developing a robot for any task takes days, not years. We believe that by training end to end controls in simulation with reinforcement learning and above that iterating hardware designs, we can automate the whole development process.

To validate our approaches for our AI system and to collect data, we invented an automatic tile grouting robot that boosts productivity by up to 5x and are piloting it on construction sites in Singapore managed by Woh Hup, BHCC, Gin Chia, Soilbuild, Chan Rong Fen, and Dragages. Tile grouting is the process of filling up the gaps between tiles after the tiles have been laid. We invented a patented robot that is able to automatically grout and clean tile gaps with only a press of a button.

We’ve raised over 3m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, ffVC, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://drive.google.com/file/d/1SEj-CUkHErY332Xbn8t8h_kzUA562gRe/view?usp=sharing

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

1. Assisting with the recruitment process, including posting job openings, reviewing resumes, and conducting initial candidate screenings.
2. Coordinating and scheduling interviews with job applicants and hiring managers.
3. Assisting in onboarding new employees, including paperwork and orientation.
4. Maintaining and updating employee records and databases.
5. Assisting with HR-related communications, such as preparing HR documents and announcements.
6. Supporting HR team with various administrative tasks.
7. Assisting in the development and implementation of HR policies and procedures.
8. Conducting research on HR trends and best practices.
9. Assisting in organizing HR-related training and development programs.
10. Participating in special HR projects and initiatives as assigned.
11. Scheduling and joining meetings with prospective clients, investors, and partners
12. Market research for expansion overseas
13. Accounting and purchasing
14. Scouting for new opportunities, writing proposals for them, and pushing fabrica out there
15. Visiting industry trial sites, giving appropriate feedback to product development team
16. Speaking to industry players, ground workers, understanding the process of tile grouting to help us shape our solution, especially from an operational point of view
17. Connecting manufacturers and our product team to build and iterate on our prototype, creating new avenues for manufacturing at scale, manufacturing for reliability
18. Website and other marketing/public relations management
19. Any other operational duties

A great candidate would possess the following:

• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back of the envelope calculations
• Keenness to do more than is expected, impact driven
• Growth mindset driven

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our Diffusion WET Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

On behalf of our hiring client who is an Original Equipment Maker (OEM), we are looking for a suitable candidate to join them as Product Design Engineer (Electrical).

Responsibilities:

• Provide technical support to the Project team, Installation on problem verification, report and coordinate with Group on job site issues and technical solutions related to electrical design.
• Involving in design interfacing and parts provision among Group of companies.
• Participate in the resolution of design problems related to Error/Trouble investigation, and formulate corrective & preventive measures.
• Provide engineering support to Sales Team for new products.
• Provide Maintenance Works Inquiry/Spare Parts Inquiry/Order Supports.
• Any other ad-hoc matters assigned by the Manager.

Requirement

• Degree/Diploma in Electrical Engineering with at least 2-3 years experience in electrical design work.
• Proficient in Auto CAD & 3D software is essential
• Fresh degree holders are welcome to apply

EA license : 22C0971 | EA Registration : R21101298

Location: East

JOB DESCRIPTION:

Role Purpose:-

The Project Engineer is tasked with planning and executing specific job tasks or work scopes on the FPSO project.

The complexity and scale of these scopes can be vary based on the Project Engineer's level of senority.

Key Accountabilities

Project managment:

• Assist the Area Manager in overseeing and managing the EPC scopes of the project. Resposibilies may include managing various work scopes or "mini-projects" within each phase to ensure the overall success and timely delivery of the project.
• Collaborate with multidisciplinary teams to ensure that project activities and deliverables are executed and delivered according to the schedule.

Project planning and monitoring:

• Create comprehensive plans and timelines for the different stages of the project, including contributions to the overall project schedule development.
• Monitoring the overall project schedule and its work scopes is crucial, including expediting: 1. Engineering progress and tracking the issuance of deliverables to support related functions such as procurement and construction. 2. Procurement activities and providing support for procurement processes, purchase orders, and package engineering. 3. The timely review of engineering for package engineering and monitoring the progress of key vendor date. 4. Construction activities and ensuring the on-time delivery of essential fabrication drawings and equipment by the required dates.

Technical knowledge

• Participate in design and technical reviews, as well as workshops, to develop action registers that monitor the implementation and closeout status.

Communication and stakholder management

• Notify other functions of potential delays abd develop plans to mitigate them.
• Regularly report on project status to the project management team and aid in producing progress reports for stakeholders.

JOB REQUIREMENT:

• Bachelor’s degree in Engineering or equaivalent technical discipline.
• At least 2-4 years of experience in Oil and Gas industry and/or in EPC projects or equivalent
• 4-10 years of experience in Oil and Gas industry.
• 4-10 years of experience in EPC projects or equivalent.
• Knowledge of project management principles.
• PMP certificate is desired
• Technical knowledge in FPSOs or other oil ad gas facilities.

Responsibilities:

• Design, develop, code, and document larger modules as part of firmware projects and lead a firmware project.
• Rich experience on embedded SoC software development and debug environment setup.
• Work with relevant architects, software and hardware teams to finalize the system level solutions and modularize the firmware development works.
• Utilize low level C coding techniques when developing codebases, follow coding standards and follow standard development best practices.
• Read schematics, utilize oscilloscopes, digital analyzers, and other test equipment in the development and debugging of firmware designs.
• Have fundamental knowledge about the operating system and its common drivers, especially understanding basics of RTOS.
• Have fundamental knowledge about inter-chip communications in heterogenous processor environment, and able to use OpenAMP or RPC such techniques.
• Understand storage devices/controller (i.e. SAS, SATA etc.) driver, protocols and firmware design is a plus.
• Understand power management at system level and OS power management handling is a plus, especially familiar with PMIC firmware.
• Understand the virtualization techniques on server environment is a plus.

Requirements:

• Minimum degree in Bachelors Engineering in Computer Science/Engineering, Electrical Engineering, related field or equivalent experience on embedded system.
• Minimum of 3-5 years of experience
• Experience with implementing embedded operating systems such as Linux, FreeRTOS on target hardware
• Demonstrated experience with C/C++/assembly language programming.
• Demonstrated experience with ability of problem analysis and solving.
• Familiar with RISC-V/ARM ISA is a plus.
• Good team player and be able to prioritize the tasks and delivery the modalized development work.

OTSAW Digital is seeking creative, energetic well-rounded Product Development Engineer to work in the field of autonomous robot technology.

You will be responsible for integrating and testing software solutions in simulation and on the robot. We are looking for engineers who are interested in tackling challenging problems for our robots.

At OTSAW Digital, we want people with passion. We want innovators. We want people who can collaborate and bring us a creative future. So, if you are passionate about working in a startup, want to solve hard problems and make cool robots with us, please apply.

Responsibilities:

• Oversee and in charge of technical matters (both Software and Hardware) for assigned product line.
• Support Commercial Team in technical evaluation of new projects requirement, translating customer needs into product design and development requirements.
• Conceptualize and prototype new product ideas.
• Design and conduct validation test for new product functions, features.
• Fine-tuning product designs until they are ready for production.
• Delivering product specifications and procedures to the manufacturing team for production purposes.
• Delivering product specifications to the commercial team for sales purposes.
• In charge of troubleshooting and correction for technical issues escalated to R&D department.
• Coordinate and manage Development projects for assigned product line.

Requirements:

• 2-3 years working experience in relevant fields.
• Min. education qualification: Bachelor Degree in Robotics Engineer, Mechatronics, Computer Engineer, Electrical Engineer, Mechanical Engineer or other Engineering related course
• Strong foundation in Electrical, Mechanical and Software System are preferred
• Demonstrate deep interest & understanding in relevant domain of interest
• Experience in developing on actual physical robot is a plus
• Experience in any of the following C++, Python, ROS, JS, Git, Autodesk Eagle, Autodesk Inventor is a plus

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Senior Data Engineer

Institution: National Healthcare Group
Family Group: Administration

The Senior Data Engineer leads the creation, maintenance, and strategic development of our advanced data analytics infrastructure, which is vital to the hospital's data-driven decision-making processes. This role oversees the acquisition, storage, retrieval, and optimization of data from various sources to support clinical, operational, and research initiatives. The position directly supports the work of the Group Chief Data Officer (GCDO) for Data Analytics and provides leadership to the data engineering team.

Leadership and Management:

• Lead and mentor a team of data engineers, fostering their professional growth and ensuring high-quality deliverables.

• Develop and implement best practices, standards, and architectural decisions for data engineering processes.

• Collaborate with cross-functional leadership to align data engineering strategies with organizational goals.

• Drive innovation in data engineering practices and technologies within the organization.

Strategic Planning and Execution:

• Develop and execute the long-term vision for the data engineering function, aligning with the institution's overall data strategy.

• Identify opportunities for process improvements and automation to enhance team efficiency and data quality.

• Manage resource allocation and capacity planning for data engineering projects.

Data Sourcing and Collection:

• Oversee the identification and evaluation of source systems.

• Guide the team in gathering requirements on frequency, volume, and types of data.

• Ensure robust data privacy and compliance measures are in place, liaising with legal and compliance teams as necessary.

Data Ingestion and Architecture:

• Lead the design and implementation of scalable, efficient data ingestion pipelines using Informatica IDMC, Spark, and Python.

• Establish architectural standards for reliability and fault tolerance of ingestion pipelines.

• Oversee data transformation strategies during ingestion.

• Manage vendor relationships and collaborations for data ingestion projects.

Data Lake Management and Integration:

• Direct the structuring of data in the DataBricks Lakehouse to ensure optimal usability and performance.

• Oversee data partitioning, indexing, and archival strategies.

• Lead integration efforts with DataBricks Lakehouse, ensuring seamless accessibility for data scientists and analysts.

Data Quality, Validation, and Security:

• Establish comprehensive data quality frameworks and validation protocols.

• Implement and oversee security measures, including access controls, data encryption, and regular audits.

• Collaborate with compliance officers to ensure adherence to healthcare data regulations.

Performance Management and Optimization:

• Set and monitor KPIs for data ingestion pipeline performance.

• Lead optimization efforts to meet and exceed SLAs.

• Conduct regular performance reviews and implement improvement strategies.

Strategic Collaboration and Communication:

• Serve as the primary liaison between the data engineering team and other departments, including data science, business analytics, and IT.

• Present data engineering strategies, progress, and challenges to senior management.

• Foster a culture of knowledge sharing and continuous learning within the team.

Qualifications:

• 8+ years of experience in data engineering, with at least 3 years in a leadership role.

• Strong technical expertise in data engineering tools and technologies, including Informatica IDMC, Spark, Python, and DataBricks.

• Excellent communication and interpersonal skills, with the ability to influence and collaborate across all levels of the organization.

Nice to Have:

• Proven track record of successfully leading data engineering projects in a healthcare setting.

• Advanced knowledge of healthcare data standards, privacy regulations, and compliance requirements

Hitachi Asia Ltd., a subsidiary of Hitachi, Ltd., serves as the regional headquarters for seven countries across Southeast Asia (Indonesia, Malaysia, Myanmar, Philippines, Singapore, Thailand, and Vietnam). We are constantly increasing our presence through our forays in information & telecommunication systems, power systems, social infrastructure & industrial systems, electronic systems and equipment, construction machinery, high functional materials and components, automotive systems, and home appliances, among many more.

Position Overview:

We are seeking a highly motivated and skilled IT Infrastructure Engineer to join our team. The successful candidate will play a critical role in system implementation, ongoing maintenance, and support of existing systems, as well as providing proposals for new projects. This role will primarily serve a key customer, a prominent Japanese bank in Singapore.

Job Duties:

• System Implementation: Lead end-to-end system implementation projects, including planning, design, setup, testing, and system release.
• System Maintenance & Support: Provide troubleshooting and issue resolution for existing systems to ensure smooth operations.
• Project Proposal & Requirements Gathering: Collaborate with clients to understand requirements, evaluate solutions, and prepare detailed project proposals.

Key Qualifications:

• Education: Bachelor’s degree in computer science, IT Engineering, or a related field.
• Experience: - 8+ years in IT projects, particularly within banking or financial institutions. - 5+ years of hands-on experience in system infrastructure implementation. - 3+ years of experience working with major banks in Japan is highly preferred.
• Technical Expertise: Strong knowledge of system infrastructure, including Windows OS, Oracle Database, VMware, and other system operation products. Familiarity with JP1 or similar enterprise-level system operation tools. Proficient in programming and scripting languages (e.g., WinBatch, PowerShell).
• Language Proficiency: Advanced skills in listening, reading, writing, and speaking in both English and Japanese language to effectively communicate with clients and teams.
• Customer-Focused: Strong customer service orientation, with the ability to understand and address client needs effectively.
• Additional Skills: Ability to diagnose and resolve software-related issues in collaboration with product support teams. Strong communication and negotiation skills, with experience in working cross-functionally with internal and external IT teams.

· Drive Technical and Maintenance support to all operating facilities in instrumentation and control systems, including ICSS / DCS / PLC

· Ensure the installations are maintained and managed with respect to regulatory requirements

· Actively contribute with technical and advisory support to Operations Managers / Maintenance Managers and offshore facilities in terms of Instrumentation and Control Systems

· Actively contribute to incident investigation and provide technical support to Emergency Response team as and when required

· Participate in planned shutdown as and when required

· Review and provide the engineering solutions for Management of Change Request from Facilities as per procedure

· Review the Shutdown / Breakdown Reports and verify / carry out Root Cause Analysis

· Update Lesson Learned Register based on Management of Change Request, Shutdown / Breakdown Reports review, Survey / Audit Reports etc.

· Provide in-house training for the offshore team as and when required

· Carry out competency evaluation for onboard E&I Supervisors and Instrument technicians as requested

· Provide budget requirements in terms of maintenance, long term plan and surveys

· Provide input for new project bids and variation orders, based on Lessoned Learned from operating facilities

· Act as a mentor and resource for new employees and less experienced colleagues

· Continuously make suggestions for improvements in all spheres of influence

· Additional responsibilities as required

Roles & Responsibilities

Job description:

• Responsible for day to day Operations and administration on network & security infrastructure
• Responsible for firewall security appliances, routers and switches particularly trouble shooting and/or debugging network related problems.
• Perform support, configuration and maintenance of network equipment and network operating System
• Perform basic Linux administration and able to configure, manage network application.
• Handle network projects and identify any missing components in the infrastructure and support future demands on the network infrastructure.
• Good Knowledge troubleshooting, problem identification, problem resolution and/or resolution recommendation activities
• Must have experience in managing of Checkpoint firewall, Extreme, HPE, Cisco, Aruba Switches.
• Work with vendors to deliver the project scope and meeting project deadlines
• Proactively monitor network performance, ensuring high network availability and smooth operations
• Involve in Network and IT audit and adhere to security compliance and governance.
• Perform evaluation, proof of concept and provide recommendations.

Job Requirements:

• A Bachelor’s degree in Computer Science, Computer Engineering, IT or equivalent.
• Must be CCNA certified, CCNP preferred.
• Working knowledge plus at least a year’s experience in networking technologies like Structured Cabling, WAN, LAN, VPN, Network Security, Wireless, iBGP, eBGP, Routing Protocol, OSFP etc.
• Hands on experience in implementing, administering and troubleshooting network infrastructure devices, including cisco, Brocade routers, Dell enterprise and cisco switches, network firewall, IPS, SIEM, vulnerability assessment and monitoring tools.
• Experience in IPv6 and Data Centre operations an advantage.
• Familiarity with Linux (as a user and system), container technology, security concepts, project management and ITIL processes will be added bonuses.
• Familiar with Dense wavelength division multiplexing DWDM) is a plus.
• Familiar with basic Linux administration is a plus.

Responsibilities:

• Handles the technical aspects of patch deployment and system updates.
• Ensures that patches are tested, scheduled, and deployed with minimal disruption to system availability.
• Responsible for testing patches in a controlled environment before deploying them to production systems.
• Verify that patches do not introduce new issues or conflicts.
• Regular scanning and analysis.
• Scheduled and controlled patch deployment.
• Perform risk-based prioritization.
• Rigorous testing in a controlled environment.
• Collaborate with customer’s IT team for user acceptance testing.
• Emergency response for critical vulnerabilities.
• Understand the customer’s infrastructure and become familiar with the Customer’s infrastructure environment and support processes and procedures to ensure supporting customer with proper SLAs.
• Troubleshoot production issues to fix any user related issues and work with principal vendors and customer to provide the resolution within the proposed timelines.
• Be available for customers’ questions in assisting their needs to support any issues and monitor customer’s environment leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.

The Individual and their Experience:

• Linux OS patching
• MySQL system and patching knowledge
• MSSQL system and patching knowledge
• Maria DB system and patching knowledge
• Eagerness and willingness to pick up & adapt new skills and automation.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernizing key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernization.

Logicalis Group has an annualized revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

Interested applicants please submit your application with your expected salary and notice period to be considered for the role.

We regret that only shortlisted candidates will be notified.

As part of any recruitment process, we collect and processes personal data relating to job applicants. We are committed to being transparent about how we collect and use that data and to meeting our data protection obligations. By applying to this post and sending us your resume, you agree to the collection, use and/or disclosure of your personal data in the manner as set out in our Data Protection Notice for Job Applicants which can be found

Logicalis is committed to protecting your privacy.

Click below to view the data protection notice.

https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf.

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy