Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

Sales Engineer offers specialized chemistry programs and related services for downstream oil and gas operations, aimed at maximizing production, protecting assets, and reducing operating costs and environmental impact. Through on-site problem-solving and innovative technologies, our team delivers solutions that assist energy customers in overcoming complex challenges in the most demanding energy frontiers. Our downstream team utilizes advanced chemistries and technologies to provide Oil & Gas customers with comprehensive and sustainable solutions to safeguard their assets, mitigate risks, and enhance profitability

Responsibilities:

• Leading Chemical Treatment Programs: Responsible for the chemical treatment programs at the client’s site, ensuring optimal performance and promptly addressing any deviations from the treatment plan.
• Analytical Field Testing: Comprehend the principles of field testing procedures and collaborate with service technicians to perform routine field testing
• Reporting and Communication: Provide regular chemical treatment program reports to clients, keeping them informed about progress and updates according to the agreed schedule.
• Inventory and Equipment Management: Oversee the planning of chemical stock levels in Singapore and manage inventory at client sites. Maintain an equipment maintenance program to ensure 100% equipment uptime and seamless operations.
• Monthly Technical Review: Prepare and deliver comprehensive monthly review materials to clients. These reviews serve as a valuable platform for discussing program effectiveness and identifying areas for improvement.
• Value-Added Projects: Actively source and develop value-added projects in collaboration with clients. These projects are designed to reduce the Total Cost of Operation (TCO) with Ecolab’s product.
• Troubleshooting and Collaboration: When clients encounter challenges related to chemical treatment programs or Ecolab’s products, step in to troubleshoot and collaborate with team members to find solutions.
• Proposal Development for New Opportunity: Develop chemical treatment proposals to enhance efficiency and address specific client requirements. Present new chemical treatment proposals to client. Lead the initiation and evaluation of new applications.
• Contract Management: Collaborate with application engineers and service technicians to ensure compliance with contractual obligations.
• Business Performance Review: Prepare and present the executive performance results material to the key client stakeholders and the head of the department. This can occur quarterly, half yearly or annually depending on contract obligation.
• Client Relationship Management: Building and nurturing strong relationships with clients is paramount. Frequent engagement ensures effective communication and mutual understanding.
• Billing and Invoicing Process: Maintain bookkeeping for client accounts under your responsibility. Verify billing amounts and work with the billing team to issue invoices to customers.

Requirements:

• Bachelor’s Degree (Chemical Engineering) with at least 8 years of relevant technical Sales & Service experience
• Should have technical sales or field sales support experience
• Must have a valid Class 3/3A Singapore Driver’s License
• Working knowledge of boilers, cooling towers, and wastewater treatment systems
• Experience with refinery or chemical processing is advantageous
• Curious and eagle to find out what customers’ needs and good approach to solutioning
• Effective critical thinking and problem solving skills
• Customer oriented and always ready to engage with customers
• Able to work in a refinery/chemical plant

We are seeking a highly skilled and motivated Project Engineer to join our team in the marine field. The successful candidate will manage and oversee projects from inception to completion, ensuring all objectives are met on time and within budget. The Project Engineer will coordinate on-site activities, working closely with designers, shipyards, and vendors to drive project success. This role requires strong leadership, exceptional organizational skills, and the ability to communicate effectively with diverse teams and stakeholders.

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

Purpose: To manage and provide technical support of IT systems and networks, to ensure uninterrupted and secured business operation, and compliance with VDL/ETG standards and roadmap.

Key Area of Responsibilities:

• Maintain and update all information technology (IT) systems, devices and peripherals, within the company to ensure stable and reliable performance.
• Maintain and update the company’s network infrastructure and adhere to the parameters & static address tables according to the One-ETG standard.
• Trouble-shoot and resolve all IT-related technical issues and prevent re-occurrences.
• Ensure security and proper access control of all IT systems, networks and data, so that they are free from malware, spyware, hacking, illegal software and unauthorized access.
• Create regular backups of all relevant company data and store it safely, to ensure Business Continuity, in case of systems and/or network outage.
• Research and benchmark new developments in the IT industry, and propose improvements to business processes to save costs and drive for better efficiency and productivity.
• Source, communicate and manage external parties or service providers that provide service support and maintenance to operational IT matters.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Computer Science/Electrical and Electronic Engineering or other relevant field.
• Minimum 3 years of working as a system support engineer in the semiconductor industry or other similar roles.
• Proficient in Microsoft Excel functions
• Good communication skills

Tasks:

● Develop and implement navigation algorithms for autonomous robots, including

localization, mapping, and path planning.

● Integrate sensor data from various sources (lidar, cameras, IMUs) to improve robot

perception and navigation capabilities.

● Work with simulation tools to validate and debug navigation algorithms in a virtual

environment.

● Collaborate with other team members to ensure overall system integration and

functionality.

Education:

● A bachelor's or master's degree in Robotics, Computer Science, Electrical

Engineering, or a related field is typically required.

Technical Skills:

● Robotics: In-depth understanding of robotic systems, kinematics, dynamics,

and control theory.

● Navigation algorithms: Proficiency in developing localization, mapping, and

path planning algorithms for autonomous robots.

● Sensor fusion: Experience with integrating data from various sensors (such as

lidar, cameras, IMUs) to improve robot perception and navigation.

● Linux, ROS, C++ and Python are your thing and you are familiar with modern

software development processes.

● Simulation tools: Experience with robotic simulation frameworks like Gazebo

or V-REP.

● Problem-solving and analytical skills: Strong analytical and problem-solving

abilities are vital for identifying issues, debugging complex systems, and

proposing effective solutions.

● Communication and teamwork: Excellent verbal and written communication

skills to collaborate with cross-functional teams, document technical

specifications, and present findings effectively.

Experience:

● Robotic navigation: Prior experience in developing navigation systems for

autonomous robots, including localization, mapping, and path planning.

● Sensor integration: Knowledge of integrating sensors like lidar, cameras, or

IMUs into the navigation system.

● ROS: Practical experience with the Robot Operating System (ROS) for robotic

software development and integration.

Job Responsibilities:

• Design, implement and administer security infrastructure and measures to protect against potential threats
• Test and evaluate security products and solutions
• Monitor and investigate systems and infrastructure activities for signs of unauthorized access or malicious activities
• Lead or participate in internal and external security audits and risk assessments to identify vulnerabilities in existing systems, develop and implement remediation plan for closure
• Review the technical design and facilitate onboarding process for new systems to ensure security compliance
• Develop security policies and procedures and manage compliance
• Create incident response plans; lead and manage incident response
• Promote security awareness and conduct routine social engineering tests for end users

Job Requirements:

• Bachelor’s degree or diploma in Computer Science, Information Technology, Cybersecurity, or a related field.
• 4-7 years of experience in IT or cybersecurity roles.
• Fundamental knowledge on IP networking (e.g. TCP/IP, routing, etc.) and Firewalls (e.g. FortiGate).
• Strong analytical and problem-solving skills.
• EPP/EDR product certification such as Trellix ePO, Symantec Endpoint Protection is an advantage.
• Experience in implementing security products such as SIEM, NIPS, EDR System is an advantage.
• Security Certifications such as GISA, GSEC, CISSP, CISM is an advantage.
• Proficiency in network security and encryption technologies.
• Knowledge of security frameworks and industry best practices (ISO 27001, NIST Cybersecurity Framework, and PCI DSS).
• Experience with vulnerability assessment and penetration testing.
• Strong understanding of secure coding practices.
• Expertise in configuring and managing firewalls, intrusion detection systems, and other security devices.
• Effective communication and collaboration skills to work with cross-functional teams.

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

We are looking for proactive marine service engineer who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components Overhaul and maintenance, general mechanical dismantling and assembly works.

Job Description:

· Inspect, diagnose and troubleshoot and carryout repair, maintenance or reconditioning of marine engines 2 & 4

Stroke Main/Aux Engines, Crankshaft & Camshaft Replacement and other onboard machinery.

· Collaborating with internal teams to address customer needs and provide technical assistance.

· Performing on-site repairs, maintenance and reconditioning jobs onboard the vessels in shipyards, ports,

anchorage or voyage and offshore with the team of service technicians.

· Carry out removal and installation work onboard vessels and general servicing and repair in the workshop.

· Interact with customers during the work execution.

Requirements:

· Diploma/Degree in Mechanical, Marine or Engineering related field.

· At least 5 years relevant experience within the engine overhaul industry.

· Be able to work on board vessel's engine room environment, Shipyards, Anchorage etc and travel overseas for

assignments.

· Excellent technical knowledge and problem-solving skills.

· Possess positive and responsible attitude towards work.

· Able to work with other specialists of the same or lower skill level and successfully complete projects.

· Ability to work independently.

· Ability to create internal and external work reports.

· Able to do overtime and work during weekends and public holidays for urgent repair jobs.

· Salary will commensurate according to experience & qualifications.

Additional Information:

· 5 days’ work week

· Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.

· Variable bonus and better medical benefits.

· Career growth & learning opportunity.

Job Description:

• Conduct global structural analyses, including Ultimate Limit State (ULS), Accidental Limit State (ALS), and global fatigue analyses (FLS) for fixed and floating offshore platforms.
• Develop structural design specifications and provide precise fabrication and construction guidelines.
• Prepare detailed structural analysis reports for foundations, support structures, lifting operations, sea fastening, load-out, and dry/wet tow operations, ensuring adherence to classification society standards.
• Perform collision analyses to evaluate structural impacts and propose mitigation strategies.
• Coordinate with classification societies for design and analysis approvals.
• Ensure structural designs comply with offshore wind industry standards and health, safety, and environmental regulations.
• Collaborate with multidisciplinary teams to integrate structural designs with other engineering disciplines.
• Provide technical leadership and mentorship to junior engineers to ensure quality and timely project deliverables.

Requirements:

• Bachelor’s degree in Marine Engineering or Civil Engineering (minimum).
• At least 10 years of experience in Marine & Offshore projects, including conceptual studies, FEED, and detailed design.
• Proficiency in finite element methods and engineering software such as SESAM, SACS, etc.
• Experience or knowledge in wind farm foundations, offshore substations/structures, and floating wind design/analysis is highly desirable.
• Strong leadership abilities, with a commitment to personal and team development.
• Excellent team player with strong communication skills for interactions with clients and third parties.
• Familiarity with marine and offshore industry standards and codes.
• Exceptional verbal and written communication skills, with attention to detail and effective interpersonal abilities.

The responsibilities shall include, but are not limited to, those contained in the following statements:

1. direct liaison with stakeholders in charge of project services (procurement/ draughting/ assets/ human resources);

2. specify scope of work and budgets for engineering activities, assets and 3rd party activities;

3. to be conversant with all items and conditions of the project both technically and commercially and to have a full understanding of the scope of work;

4. implementation, control and monitoring of overall safety and quality assurance in all project related activities as laid down in the company’s management system;

5. preparation and maintenance of budgets for the project assisted by the cost controller

6. preparation of the monthly reporting internal & external;

7. ensuring variations between actual costs and budget are monitored and controlled;

8. identifying and initiating any variations towards the client or approve/ reject variations from third parties on the basis of the contract T&C’s;

9. liaise with the client and ensure that project meetings are held with relevant personnel;

10. establishing all the resources from company’s departments needed to carry out the project.

11. encourage any technical developments or suggestions that will enhance the overall project engineering or operational efficiency;

12. ensure that all aspects of project administration, engineering and operations fulfil the contract requirements and are conducted in a safe, efficient and profitable manner;

13. conduct all activities within the management system, procedures and work instructions;

14. advise and assist commercial department with tenders for potential work;

15. ad-hoc duties as deemed required to complete the workscope.

Job Responsibilties

• Coordinating all O&M and plant outage activities to achieve safe, reliable and efficient operation of the Power Station
• Supporting and liaising with relevant Asset/Operation departments for long term power station turnaround planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation
• To fully develop and utilize the CMMS for efficient and effective O&M Planning practice and co-ordination with service provider for license management, backup, individual account management and software upgrade
• Fully utilizing the CMMS to ensure all O&M activities and experiences are recorded to comply with Station, legislative and company policy requirements
• To assist fully with and help implement all HSE practices and a Quality Management System as applied to the Power Station
• Perform review on maintenance plans, monthly maintenance report and consolidation of planned and unplanned outage reports
• Review the completeness and organize the filing of departmental documentations
• Additional tasks and responsibilities given by power plant management
• Provide close and constant liaison between operations and maintenance through the individual coordinators
• Provide data expert analysis and advise on maintenance / operations performance
• Responsible to track , safe keeping of the necessary documentation of “ Management of Change” and ensures the process is closed and updated the changes in CMMS & O&M manuals accordingly
• Preferably with MAXIMO, SAP & PREMAVERA and Microsoft project experience
• Organizing the meetings with 3rd party vendors & MMA( Major Maintenance Agreement) meeting

Job Requirements

• Degree / Diploma graduate in relevant engineering field
• Knowledge on operation and maintenance activities of Combined Cycle Power Plant
• Knowledge on project management and resource planning
• Knowledge in maintaining maintenance record in CMMS
• At least 2 years of relevant working experience in Power Plant Maintenance ideally on a CCPP (any manufacturing industry)
• Experience involvement in technical aspects of Power Plant operation and maintenance
• The post holder shall be medically fit and able to undertake the duties of the post and any additional duties as detailed in the Power Station Emergency Response Plan
• Plant availability, plant reliability, work order performance and outage duration
• Administrator for Power Station CMMS system
• Work in all areas of the plant site (both indoor & outdoor environment)

Responsibilities:

• Perform feasibility study, concept design, front end engineering design (FEED) and detailed designs for concrete and steel structures in Energy and Industrial related facilities such as pile foundation, footings, pilecaps, pipe racks, sleepers, pipe bridge, equipment plinths, underground pipeline culvert, drainage, sewerage, road works
• Prepare related material take off (MTO) for cost estimates
• Prepare tender specifications, project requirement, carry out tender evaluation for projects
• Conduct project presentation to clients and stakeholders
• Project management for engineering works
• Perform authorities’ pre-consultation, submissions and liaison with authorities for necessary approvals and permits

Requirements:

• Degree in C&S Engineering, preferably from a university recognised by Singapore Professional Engineers’ Board (PEB), with strong competency in concrete, steel and foundation design.
• Able to perform concrete and steel structural analysis and design, and preferably also working knowledge in using application related to geotechnical design like Plaxis and Geoslope.
• Experience in marine facilities’ design would be an added advantage
• Minimum 5 years of relevant design experience in concrete, steel and foundation structures, drainage, sewerage and road works, preferably in a consultancy firm
• Candidate with more than 15 years of relevant design experience and/or a locally registered Professional Engineer will be considered for higher position
• Knowledge in Eurocodes, BS Codes. Knowledge in NFPA, API would be an added advantage
• Conversant with local authorities’ requirement, pre-consultations and submissions
• Experience in performing feasibility study, conceptual, FEED and detailed design, preferably, able to perform basic CAD drafting
• Possesses skill in project management, conducting presentation, effective communication and good report writing skills
• Good spoken and written English
• Fluency in spoken and written Chinese would be an advantage
• Able to travel for oversea projects at short notice

Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

5. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them

6. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.

7. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

About the Role:
We are seeking an AI Engineer specializing in NLP to join our core tech team. You will develop and refine NLP and speech recognition models to power our fintech solutions. Working side-by-side with Product, Backend, and overseas engineering counterparts, you will help bring cutting-edge language technologies to life, delivering improved user experiences and efficient operations.

Key Responsibilities:

• Model Development: Design, train, and optimize NLP models (e.g., language models, entity recognition, sentiment analysis) using Python and frameworks like TensorFlow or PyTorch.
• Algorithm Innovation: Explore and implement state-of-the-art NLP techniques, keeping current with research and best practices in the industry.
• Data Pipeline & Integration: Collaborate with Backend Developers and overseas engineering teams to integrate AI models into production environments, ensuring scalability and performance.
• Performance Tuning & Evaluation: Continuously evaluate model performance, conduct error analysis, and fine-tune algorithms to meet product and business objectives.
• Documentation & Knowledge Sharing: Document your work comprehensively, and mentor or guide team members in AI best practices as needed.

Qualifications:

• Experience: 3-5 years in AI/ML engineering, with demonstrated experience in NLP projects.
• Technical Skills: Proficient in Python and familiar with machine learning frameworks (TensorFlow, PyTorch). Experience with modern NLP techniques (e.g., Transformers) is a plus.
• Problem-Solving: Ability to translate complex problems into technical solutions and optimize models for real-world fintech applications.
• Teamwork: Strong collaboration skills to work effectively with cross-functional teams, including product and overseas engineering partners.
• Able to communicate in mandarin to work with chinese-speaking counterparts.

1. Design and Planning

• Review and interpret electrical designs, blueprints, and technical drawings.
• Coordinate with design engineers, architects, and other stakeholders to ensure that electrical plans align with project requirements.
• Propose modifications or improvements to electrical systems to enhance efficiency or safety.

2. Installation and Supervision

• Oversee the installation of electrical systems, equipment, and fixtures, ensuring compliance with standards and specifications.
• Supervise electricians, technicians, and subcontractors to ensure proper execution of tasks.
• Plan and allocate resources, including manpower, tools, and materials.

3. Quality Assurance and Compliance

• Ensure that all electrical work complies with local codes, standards, and regulations (e.g., NEC, IEC).
• Conduct regular inspections and audits to ensure quality and adherence to safety protocols.
• Test and commission electrical systems to confirm functionality and performance.

4. Troubleshooting and Maintenance

• Identify and resolve issues with electrical systems during installation or operation.
• Develop and implement preventive maintenance schedules for electrical equipment.
• Prepare troubleshooting guides and provide technical support as needed.

5. Safety Management

• Enforce safety protocols and ensure the use of appropriate Personal Protective Equipment (PPE).
• Conduct risk assessments to identify and mitigate hazards related to electrical works.
• Train staff on electrical safety and emergency response procedures.

6. Documentation and Reporting

• Maintain detailed records of electrical installations, inspections, and maintenance activities.
• Prepare daily progress reports, test reports, and as-built documentation.
• Report project progress and issues to the project manager or higher management.

7. Budget and Cost Control

• Estimate costs for electrical components and systems.
• Monitor project expenditures to ensure that electrical work stays within the budget.
• Suggest cost-effective solutions without compromising quality or safety.

8. Coordination and Communication

• Collaborate with other engineering disciplines to integrate electrical systems into the overall project.
• Communicate effectively with stakeholders, including clients, contractors, and suppliers.
• Attend project meetings and provide updates on electrical works.

9. Problem-Solving and Innovation

• Propose innovative solutions to overcome challenges during project execution.
• Stay updated on advancements in electrical engineering and incorporate new technologies where applicable.

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

PRIMARY FUNCTION:

• Responsible for overseeing the Operation and Maintenance of assigned Utility systems including: Non-GMP and GMP Utilities and Non-GMP and GMP HVAC equipment; including but not limited to other equipment: Boilers, Chillers, Air compressors, Building Management System, CO2, N2, Effluent Treatment Plant, Water Treatment.
• Accountable for Operation, Maintenance and monitoring regimes and play a key role in improving Utilities reliability rates, maintaining compliance, providing for a safe work environment, and controlling costs of the Utilities operations.
• To provide support to ongoing plant operations on a 24 x 7 basis and ensure total compliance to regulatory, cGMP and Environment, Health and Safety (EHS) standards
• Supervise contractors, and technicians and provide day to day operational support and maintenance services including, modifications and changes to processes and equipment, troubleshooting, deviation investigation, identification, and completion of corrective and preventative actions.
• Oversee the day-to-day operations and routine/ breakdown maintenance of Utilities Equipment systems
• Maintain operations and maintenance records to comply with regulatory, cGMP and EHS requirements.
• Take ownership of utility systems as the Subject Matter Expert
• Participate in corporate, regulatory, cGMP, EHS and other internal/ external audits as required by the management.
• Analyze technical problems in the utility and manufacturing areas and develop both short term and long-term recommendations for their correction. Lead or assist cross-functional teams in finding solutions to technical problems.
• Actively engaged in developing specifications for equipment and utility systems and assist in FAT/ SAT of related equipment as part of the new buildouts
• Participates in vendor bid solicitation, selection and contract management.
• Responsible for the performance of preventative & repair maintenance of utility system equipment, periodic inspections of utility systems to ensure proper operation, and daily checks/repairs in compliance with Standard Operating Procedures (SOPs).
• Analyze trends and identify issues and improvement opportunities proactively.
• Coaching and mentoring of Technicians in the execution of routine operations and maintenance works.
• Ensure that contractors are delivering quality services.
• Ensure that all internal customer demands are being met.
• Compliance with local regulatory laws is also required.

MAJOR RESPONSIBILITIES:

• Responsible for overseeing the Operation and Maintenance of assigned Utility systems including Non-GMP and GMP Utilities and Non-GMP and GMP HVAC equipment; including but not limited to other equipment: Boilers, Chillers, Air compressors, Building Management System, CO2, N2, Effluent Treatment Plant, Water Treatment.
• Responsible for developing the standard operating procedures, implementing of preventive and predictive maintenance, calibration program to ensure utilities equipment are maintained to thehighest level of Safety & Quality. This includes routine and plant major shut down activities.
• Responsible for support and execution of equipment qualification such as commissioning, IQ/ OQ/ PQ.
• Lead a team of technicians and contractors for day-to-day utilities operations to ensure zero
• downtime of utilities systems and drive continuous improvement projects/ initiatives.
• Preparing operation and maintenance zero base budget.
• Carry out other work or task as directed by Manager.

REQUIREMENTS:

• Bachelor of Engineering Degree in Mechanical/ Electrical/ Chemical/ Engineering or related discipline
• MOM certified Steam Engineer Certification preferred
• Minimum 3 years of relevant experience in Utilities/Mechanical/Maintenance/Electrical engineering related positions
• Hands-on experience in routine operations, maintenance, engineering design, start-up, and commissioning of the relevant Utilities Discipline
• Knowledge of cGMP is highly preferred
• Good planning and supervisory and strong interpersonal skills.
• Good contractor management skills.
• Mentoring and coaching skills.
• Excellent leadership and communication skills
• Green belt certification preferred.

*Kindly note this position is based in Tuas.

JOB DESCRIPTION

Job Title

Civil and Structural Engineer

Occupation

Building Construction Engineer

Job Description & Requirements

Roles & Responsibilities

Job Descriptions:

• Perform Civil/Structure engineering design works
• Analysis on structural components with engineering software
• Determine best materials and methods with Professional Engineers
• Liaise with Architects on design and safety of structure
• Prepare drawings, specifications and computer models of structure
• Liaise with Clients, Consultants and Authorities for management of project
• Responsible for on-site technical / engineering / administrative matters
• Involve in project planning, implementation and close monitoring of projects
• Ad-hoc duties as assigned by the Senior Engineer

Requirements:

• Candidate must possess at least Degree in Civil/Structural Engineering (degree recognized by PE Board preferable)
• Minimum 1 years’ relevant experience requried; non entry level candidate is desired
• Required Skill(s): Good communication and interpersonal skills, ability to liaise with all levels of people
• Relevant experience in design of Buildings, Civil and Infrastructure works
• Preferably with project site co-ordination experience
• Familiar with local laws, design codes and submission requirements is advatangeous
• Knowledge of engineering software and MS Office
• Proficient in AUTOCAD and Civil and Structural Engineering software applications
• Entry Level candidates are encouraged to apply

Please indicate reason for leaving each employment and expected salary in your CV.

Salary package shall depends on candidates' working experiences and qualifications.

Project Design & Engineering Calculations and Proposal drawings to Client Management.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as per Equipment sample or Site measurement studies

Analyse sub-contractor proposals, design and calculation feasibility study.

Coordinate with Government and various agencies.

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Manpower planning, deployment and control and on-time schedule.

Coordinate to resolve engineering and construction issues and manage the schedule.

Safety mindset and ability to develop RA and permit to work application.

Maintain proper project documentation and ensure accuracy of all design submissions to comply with project specifications and clients’ requirements.

Monitoring of site activities, material requisition, cost control, project supervision and schedule of works

Ensure that works are executed within an acceptable standard of workmanship and in line with safety procedures

Understand and ensure compliance in project requirement and scope of work

Issuing of material requisition form, assist in purchasing materials/items required by production/customers, prepare marketing material & etc.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Any adhoc duties as assigned by management.

Min 3-5 years’ of experience in Engineering mfg, Recycling, Oil & Gas and Chemical plant industry.

Applicable for Only Singaporeans & PR's.

Job Description:

Are you ready to revolutionize the future of water and wastewater treatment systems while enjoying flexibility in your work environment? Join our innovative team and make a difference in shaping sustainable solutions for various industries. As a valued team member, you will:

• Contribute to the design of cutting-edge water and wastewater treatment systems throughout the tendering and project stages, leveraging your expertise to drive impactful change.
• Prepare meticulous documents and drawings, including Flow diagrams, GA, and technical specifications, ensuring precision and adherence to standards.
• Lead detailed engineering efforts for secured projects, crafting comprehensive plans encompassing PFD, PID, technical specifications, process descriptions, and control philosophies.
• Assess engineering requirements meticulously, from equipment sizing and material selection to piping specifications, ensuring optimal process functionality.
• Collaborate seamlessly within a team to craft compelling commercial and technical submissions for tenders and proposals, engaging with clients and suppliers to deliver outstanding results.
• Facilitate technical discussions and clarifications with stakeholders, fostering effective communication and alignment.
• Contribute to testing and commissioning activities, ensuring project success and client satisfaction.
• Support the preparation of operation and maintenance manuals, ensuring seamless project handover and continued excellence.

Requirements:

• Hold a Diploma or Degree in Engineering Discipline or Environmental Science.
• Possess a minimum of 4-6 years of experience in process design for wastewater industries; senior positions available for candidates with extensive experience.
• Demonstrate proficiency in Aerobic/Anerobic processes, membrane technology (UF, MBR), and sludge handling applications in water/wastewater treatment.
• Exhibit self-drive, results orientation, and the ability to excel both independently and collaboratively within a team.
• Fluent in Mandarin to facilitate effective communication with Chinese clients and vendors.
• Prefer immediate availability or a short notice period.
• Must hold Singaporean citizenship.

Other info:

Work hours: 9.00am to 6.00pm, Monday to Friday.

Medical and Dental Benefits

Insurance

Embark on a rewarding career journey with us and be at the forefront of shaping a cleaner, more sustainable world. Apply now to join our dynamic team!

Project Design & Engineering Calculations and Proposal drawings to Client.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as Equipment sample or Site measurement studies

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Schedule the project in logical steps and budget time required to meet deadlines.

Site & office project management and daily operations including Engineering Design, Drawing and Fabrication, inspections, site measurements and handover to client’s.

Attend Site meeting, Equipment rectification in assembly and dismantling when required.

Overall project planning, scheduling, monitoring, and updating to meet project completion targets.

Liaison and meeting with client's representatives, relevant authorities, and consultants.

Site co-ordination, monitoring and report work progress.

Flair in design; able to sketch fast and produce good design concept

Coordinate all new and current on-going projects and able to communicate well with all levels

Review M&E Design Drawings and ensure compliance with design specifications and guidelines. Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Review incoming engineering, ISO piping drawings and assess impact of extra work or changes on schedule.

Ensure all regulatory and statutory requirements regarding testing and record keeping are met.

Supervise and coordinate M&E and Mechanical piping/equipment installation in accordance with approved drawings and materials. Coordinate M&E details with Clients, Consultants, Sub-contractors and other site staffs.

Monitor performance of multi-skilled craft workers in the installation, removal, or adjustment of equipment or components in accordance with established project procedures, requirements and specifications.

Monitor construction schedules, methods, manning charts, materials and equipment requirements.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Supervise electrical and instrumentation construction work as per IFC drawings.

Monitor construction schedules, methods, manning charts, material and equipment requirements.

Monitor the activities of contractors and subcontractors performing craftwork, ensuring compliance with project quality, safety, and security requirements.

Min 5-7 years’ of experience in Engineering related activities in Mfg, Recycle, Oil & Gas and Chemical plant industry.

Responsible for safety of supervised personnel; ensures that craft personnel comply with established safety policies and procedures, and that they practice safe work habits.

Applicable only for Singaporeans / PR's

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628