Key Responsibilities

Preparation and present DFM (Design for manufacturing)

Construct the Tool design assembly layout

Prepare and issue 2D detail insert & mould base drawing with appropriate tolerance for manufacturing

Tool design must be manufacturability and can estimate cycle time base on as design

Tool design concept able to run production efficiently with lowest cycle time

Tool design capable to run auto cycle

Assist in Customer Engineering Change

Continual improvement on the tool concept

Conduct tool design review to present his / her design concept

Endorse and release tooling drawing to tool room for mould manufacturing

Raise Purchase requisition for the tooling related direct and indirect purchase

Any other duties and responsibilities delegated by superior

Project Management

• To resolve all technical and non-technical issues.
• To ensure the tracking and monitoring of items per contractual requirement.
• Responsible for submission and monitoring of technical drawings, method statements and proposals.
• To ensure construction meeting client & regulatory requirements.
• To carry out short-term planning to meet site progress.
• To co-ordinate, program and monitor site work, materials, plant & equipment.
• Carry out project objectives to align with company goals.
• Reduce material wastages on site and maximise usage of machineries/equipment.
• To control the allocated direct workforce effectively i.e. no. of direct workers and overtime etc.
• Follow approved construction method that is cost effective, productive & without compromising on Quality.
• Meet targeted progress of works so as to achieve the intended cash flow.

Technical Understanding

• Understands the drawings and scope of works
• Understand the implications of different technical choices so as to meet the project objectives.
• Involving in providing value engineering solutions basing on his knowledge.
• To have knowledge in the preparation of engineering project proposals and method statements.

Job Requirements

• Candidate must possess at least Degree in Engineering (Civil) or equivalent (Recognized by PEB).
• Experience in leading a team or subcontractors would be advantageous.
• Strong communication skills.
• Highly committed and motivated individual.
• Versed in PUB(WRN) projects with more than 5 Year(s) of working experience in the related field is an advantage.
• Candidate with comparable qualification will be considered for Project Manager post.
• Fresh graduates are also welcome to apply.

Responsibilities

- Manage and analyze yield for new product off-loads and qualifications.

- Collaborate with customers on product correlation, qualification runs, design and optimization of test process and test program improvements.

- Develop and maintain test programs / hardware for Wafer Sort and Final Test.

- Prepare engineering reports and conduct technical reviews with customers.

- Develop and transfer test solutions for Wafer Sort and Final Test to production.

- Provide engineering support to Test Operations in productivity improvement

- Participate in manufacturing activities to enhance test processes and flow specifications, minimizing downtime and optimizing productivity.

Requirements

- Degree in Electronics Engineering or a related technical field.

- Minimum 2 years working experience in similar capacity preferred, fresh graduates are also welcome to apply.

- Knowledge of programming languages is an advantage.

- Experience in product testing and software / hardware debugging is beneficial.

- Possess project management, analytical, and problem-solving skills.

- Positive attitude with excellent communication and interpersonal skills.

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Engineer/Assistant Engineer (Software Programmer)

-Knowledge in electrical schematics

-Knowledge in PLC Programmer, SCADA and HMI

-Experience with Omron, Keyence, Siemens and/or Allen Bradley

-C/C++ knowledge would be advanage

-Have interest in Programmer,creative in HMI Design

-Ability to Travel Overseas at short notice

COMPANY DESCRIPTION

We are one of the largest one-stop Underground Utilities Infrastructure companies based in Singapore. We provide Underground Utilities Infrastructure construction and maintenance, sewer pipeline rehabilitation, road and airfield construction and maintenance as well as asphalt pre-mix production and construction waste recycling.

RESPONSIBILITIES

• Assist the Project Manager with daily project activities, including coordination, scheduling, planning, and implementation of work.
• Conduct regular site inspections to ensure construction activities are carried out in compliance with approved designs, contract specifications, safety standards, and quality requirements.
• Provide recommendations for corrective actions when deviations from the project scope, schedule, or quality occur.
• Serve as the point of contact for clients, consultants, authorities, and internal teams, ensuring effective communication of project progress, specifications, and any challenges.
• Review project proposals and plans to align project objectives with management expectations, ensuring performance criteria and client needs are clearly understood and incorporated.
• Oversee project timelines and milestones, proposing adjustments and modifications to the schedule as needed to ensure timely delivery.
• Assist in the achievement of team goals by actively contributing to relevant tasks and maintaining a collaborative work environment.
• Liaise with clients to coordinate project plans, schedules, and deliverables, ensuring alignment with client expectations and project requirements.
• Prepare and submit all necessary documentation, including method statements, risk assessments, progress reports, monthly reports, and other key project documents.
• Prepare and submit monthly progress claims in a timely manner, ensuring accuracy and completeness.
• Perform other duties or tasks as assigned by immediate superior or Head of Department.

• Degree in Civil Engineering recognized by Singapore Professional Engineers Board (PEB)
• Minimum 3 year of experience in constructions or civil engineering
• Those with experience in underground utilities especially cable pipes will be advantageous
• Possess excellent interpersonal and communication skills
• Service-oriented client relationship and people
• Self-motivated and able to work independently
• Preferably possess a valid Class 3 license

• 6 days work week
• Preferably possess a valid Class 3 license

Other Benefits

• Enjoy a company-provided shuttle for easy transportation to and from the office, including lunch trips.
• Free access to medical teleconsultation services for your convenience.
• Portable Medical Benefits Scheme (PMBS). Enjoy an additional monthly contribution directly to your Medisave account.
• Comprehensive Medical Benefits. Includes coverage for dental care and health screening through the company's provider.

Why Join Us

• Dynamic Work Environment: Thrive in a fast-paced, ever-evolving workplace that offers new challenges and opportunities every day.
• Varied Responsibilities: Take on diverse and exciting tasks that keep your role engaging and fresh.
• Collaborative Team Culture: Join a team that values open communication, efficiency, and a strong commitment to security.
• Growth and Development: Benefit from a supportive environment with ample opportunities for professional growth, skill development, and career advancement.

Responsiblities

a) Manage asphalt premix production quality control processes;

b) Conduct regular inspections and testing;

c) Analyse test results and implement corrective actions;

d) Maintain quality control records and documentation;

e) Train production staff on quality control procedures;

f) Collaborate with production and laboratory teams;

g) Develop and implement quality improvement initiatives;

h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:

· Cooperate with employers and follow safety and health procedure;

· Report unsafe acts and incidents;

· Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

· Diploma / Certificate in Asphalt Technology or related fields

· Preferably with relevant experiences

· Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)

· Strong analytical and problem-solving skills

· Excellent communication and interpersonal skills

· Ability to interpret test results and make informed decisions

· Familiarity with quality management systems (ISO 9001)

· Proficient in Microsoft Office and laboratory software

Job Description:-

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Assist in the preparation and management of project documentation, including drawings, specifications, and weekly progress reports.
• Work with design engineers for as-built drawings, section drawings.
• Supervise and monitor workers / welders on site for installation or maintenance.
• attend site meetings with clients / architects and authorities on project technical matters.

Requirements:-

• Minmum Diploma in either mechanical, Electrical or Construction Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• Has work experience in construction sites.
• Responsible team player with the ability to work independently in challenging projects and timelines.

Requirements:

Minimum - bachelor’s degree in civil engineering

Job Description

1. Experience in Civil Engineering Design works in the area of;

- Structural Steel design

- Reinforced Concrete design

- Geotechnical Engineering Design

4. Able to work under rushing schedule of works

5. Able to do AutoCAD drafting (if required)

6. Familiarize with preparation of Authorities Submission documents (BCA, URA, JTC, etc..)

7. Able to communicate with clients and Authorities

Job Description:

• To carry out scheduled maintenance and attend breakdown service call for installed BMS/Security/ELV System

• To carry out A&A work

• To provide technical and engineering support

• To co-ordinate with relevant parties to ensure the work is carried smoothly

• Ad-hoc duties as assigned

Job Requirements:

• Diploma/Degree in Mechanical, Electrical or Electronics Engineering

• Candidates without experience will be considered

• Preferably with experience in BMS or ELV

Other info:

· Company specializes in integrated automated systems

· Salary $2500 - $3500

Interested candidates, pls apply with resume in MS Word format

You may email to [email protected]

EA License No: 17C8809

EA Reg No: R1108561

• Attend site meetings, inspections, and monitoring of project progress with the Main Contractor.
• Ensure safe work procedures are implemented to control risk
• Other scopes of work to be assigned by the Managing Director
• Liaise with other departments to ensure information, materials or other resources to ensure project progress
• Any other tasks deemed necessary by the company related to the execution of projects

Job Title: Tiler

Job Summary : We seek an experienced and skilled Tiler to install, repair, and maintain ceramic, porcelain, natural stone, and other types of tiles in residential, commercial, and industrial settings. The ideal candidate will have attention to detail, physical stamina, and excellent craftsmanship skills.

# Key Responsibilities

1. Tile Installation: Lay tiles on walls, floors, and ceilings, ensuring precise alignment and spacing.

2. Preparation: Prepare surfaces for tiling, including cleaning, leveling, and applying adhesives.

3. Tile Cutting: Cut tiles to fit around obstacles using specialized tools.

4. Grouting: Apply and finish grout between tiles.

5. Repair and Maintenance: Repair cracked or damaged tiles and replace worn-out grout.

6. Measurement and Estimation: Measure areas to determine tile quantities and estimate project materials.

7. Quality Control: Ensure work meets quality standards and industry regulations.

8. Safety: Follow safety protocols and maintain a clean workspace.

# Requirements

1. Experience: 2+ years of tiling experience.

2. Physical Demands: Ability to lift heavy materials, work at heights, and withstand physical labor.

3. Technical Skills: Proficiency with tile-cutting machines, grout floats, and other specialized tools.

4. Attention to Detail: Meticulous attention to detail and precision.

5. Communication: Effective communication and customer service skills.

6. Safety Awareness: Knowledge of safety procedures and protocols.

7. Teamwork: Ability to work collaboratively with other tradespeople.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Principal Engineer, Supplier Quality is responsible for driving Quality performance of the suppliers to meet Sciex Product Quality requirements through supplier qualification processes, supplier control processes, aligned with supplier management strategies.

This position reports to the Senior Manager Supplier Quality and is part of the QARA team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Drive improvement of quality performance of suppliers and support NPD/NPI project, ensure resolution of the issues identified in NPI.
• Lead supplier qualification activities for new suppliers with Global Sourcing & Global Supply Chain.
• Plan and execute periodic audits at suppliers' site to ensure suppliers' QMS is meeting ISO standards, IPC standards, FDA QSR (GMP) and compliance to agreed process control plans
• Monitor supplier performance, review periodic quality data/reports/scorecards and related action plans
• Drive resolution of complex material quality issues by deep diving suppliers' root cause analysis and by working with suppliers to monitor corrective action and facilitating with internal support where required.

The essential requirements of the job include:

• Degree in Electrical/Electronics/Mechanical Engineering with of 5-8 years related experience in Supplier Quality Management, Process Engineering is preferred
• In Depth knowledge of PCBA manufacturing processes, familiar with IPC 610 standards
• Demonstrated experience on the performance of audits, lead-auditor certification preferred
• Familiar with problem solving tools such as 5 why root cause analysis, and Quality tools such as DFM, PFMEA, GR&R, Control Plan, SPC.
• Knowledge of ISO 9001, ISO13485 and FDA 21 CFR Part 820 will be added advantage

Travel Requirements:

• Ability to travel – 20-30%, and maybe travel on short notice

It would be a plus if you also possess previous experience in:

• Managing suppliers including supplier evaluation and supplier performance
• Broad knowledge of manufacturing operations and quality system practices in a Medical Device or Pharmaceutical company is preferred

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at Danaher Benefits Info.

um - bachelor’s degree in civil engineering

Job Description

1. Experience in Civil Engineering Design works in the area of;

- Structural Steel design

- Reinforced Concrete design

- Geotechnical Engineering Design

2. Able to lead the team of Engineers and drafters

3. Minimum 3-4 years of experience in C & S design in Singapore

4. Able to work under rushing schedule of works

5. Able to do AutoCAD drafting (if required)

6. Familiarize with preparation of Authorities Submission documents (BCA, URA, JTC, SCDF, PUB etc..)

7. Able to communicate with clients and Authorities

8. Well-versed in local code of practice, authorities’ regulations for submission.

9. Proficiency in engineering software such as STAAD-Pro, PLAXIS, Prokon, ETABs, TEKLA, MIDAS and SAFE etc.

· Perform incoming, in-process and outgoing quality control activities

· Liaise with customers pertaining product specifications and quality issues

· Update quality standards regularly in order to conform to customer’s requirements

· Perform in-coming, in-process and final QC daily activities

· File and update QC testing records or reports

· Review and verify daily routine QC results

· Liaise with Logistic Coordinator to arrange for outgoing shipment activities

· Report abnormalities to QA Supervisor

· Prepare quality related reports

· Take part in ISO 9001:2015 IQA activities

Any other duties and responsibilities assigned by the Company from time to time

Physically Fit, able to carry at least 10kg machine parts

Work Place : Pasir Ris (2 weeks training @ Woodlands)

Working Day : 5.5 days

Working Hour : 8.30am to 6pm, 8.30am to 12.30pm

OT available

• Attend site meetings, inspections, and monitoring of project progress with the Main Contractor.
• Ensure safe work procedures are implemented to control risk
• Other scopes of work to be assigned by the Managing Director
• Liaise with other departments to ensure information, materials or other resources to ensure project progress
• Any other tasks deemed necessary by the company related to the execution of projects

Responsibilites

• Facilitate improvement projects initiatives derived from Quality, Process and
  Productivity concerns.
• Initiate process streamline on new device configuration leads to defect prevention.
• Participate with customers status of projects in-line with internal Quality issue improvement.
• Follow-up closely with supervisor & team to monitor improvement project status and closures.
• Perform regular monitoring and audit verification of the committed actionable
• Maintain updating of the relevant QMS system for QA (NPI/QCAR/FMEA/Control Plan).

Requirements

• Degree in Electronics or Engineering or related field.
• Basic knowledge in MS office (Word, Excel, PowerPoint).
• Good communication and interpersonal skills both verbal and written.
• Knowledge in basic manufacturing solving problem tools (8D, FMEA, Control Plan) and statistical tools (SPC) are an advantage.
• Highly motivated to learn new skills / systems / analytical tools used in manufacturing operations.

Job Description:-

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Assist in the preparation and management of project documentation, including drawings, specifications, and weekly progress reports.
• Work with design engineers for as-built drawings, section drawings.
• Supervise and monitor workers / welders on site for installation or maintenance.
• attend site meetings with clients / architects and authorities on project technical matters.

Requirements:-

• Minmum Diploma in either mechanical, Electrical or Construction Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• Has work experience in construction sites.
• Responsible team player with the ability to work independently in challenging projects and timelines.

Element has an opportunity for Lab Engineer for Singapore. In this role, you will be involved in project plan, coordination, operation for soil investigation works. Attend the project meeting if required. Day-to-day site operation to ensure works are constructed as per project & safety requirement. Identify the soil/rock & record the field log. Take the soil sample for lab test. Supervise site works. Liaise with clients on site works / projects. Plan and arrange the Logistics

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Schedule the testing programmes according to priority
• Execute the soil testing works to determine the physical and mechanical of the soil samples: Supervise the technicians to prepare the correct samples for soil testing (e.g., check the assignment and UD soil samples)
• Carry out extrusion of the soil samples
• Liaise with clients for samples that are unable to meet their requirements for their decision-making
• Carry out the soil tests according to BS standards or standards specified by clien and submit the approved soil testing reports to clients

Job Requirements:

• Degree in civil engineering or geology, certificate in Site Investigation for Supervisors (BCA) is an advantage with 2 years’ relevant experience in major infrastructure projects
• SEC(K) Higher skill will be an advantage
• Physically fit and able to withstand the challenging working conditions
• Strong and determined quality focus with indefatigable determination to get the job done under the most challenging conditions and meet tight deadlines with minimum supervision
• Self-motivated team player with excellent organisational and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Responsible for organizing and managing project management activities, ensuring that projects are executing smoothly and efficiently against an agreed plan and budget. Handle customer's enquires on the assigned projects and be the primary point of contact between the company and customers. Coordinate the activities of functional departments to support the project.

DUTIES & RESPONSIBILITIES:

- Conduct cost estimation and feasibility study meeting

- Prepare and submit customer final Product Print and components 2D Prin to Document Control

- Organize and chair Advanced Product Quality Planning (APQP) Team meeting

- Establish Process Flow, FMEA, Packaging Specification, Control Plan and Production Information (PPI)

- Prepare Project Schedule and PPI after reviewing with customer

- Work with Tooling Engineer to assign tooling project subcontractor and release Purchase Request

- Lead APQP Team in reviewing Design Concept and preparing the design for manufacturability and Assembly (DFMEA)

- Review design with customer

- Establish Error Proofing, Productivity and Yield

- Monitor and tracking closely on all tool-up progress, tool repair/modification and all drawing updates to ensure schedule compliance

- Submit sample and PPAP report to customer and progress tracking

- Update and release PPI and Process Flow Chart upon PPAP approval

- Conduct hand over meeting

REQUIREMENT:

- Degree / Diploma in Precision Engineering, Mechanical Engineering or Manufacturing Engineering

- Min 3 years experience with basic knowledge in Unigraphics, Solidworks, Molding & Tool making

Responsibilities

• Support and maintain organization’s computer systems, desktops, and peripherals.
• Perform end user supports.
• Install and maintain IT equipment and software.
• Troubleshoot hardware and software issues.
• Generating MIS reports
• Strong problem-solving and troubleshooting skills.
• Strong communication and customer service skills.
• Ability to work independently as well as in a team environment.
• Flexibility to work outside of normal business hours, if required.

Job Specification

• 1 - 2 years of experience in desktop support, maintenance, and basic infrastructure/network troubleshooting.
• Those who have strong technical knowledge of desktop operating systems, desktop applications, and IT hardware but without the working experiences are welcome to apply.
• Perform onsite and remote troubleshooting to resolve end users’ issues.
• Ask questions to pinpoint problem.
• Setup workstations for new employees.
• New user account creation.
• Setup and provide support for Microsoft Outlook on Users’ workstations.
• Assist in IT report generation.
• Purchase of IT equipment, including getting the quotations.
• Maintain IT asset inventory documents.

Yee Jie Ling Jaslin | EA Reg. no.: R1440114

RS Recruitment Agency LLP | EA Licence no.: 17C8809

· Perform incoming, in-process and outgoing quality control activities

· Liaise with customers pertaining product specifications and quality issues

· Update quality standards regularly in order to conform to customer’s requirements

· Perform in-coming, in-process and final QC daily activities

· File and update QC testing records or reports

· Review and verify daily routine QC results

· Liaise with Logistic Coordinator to arrange for outgoing shipment activities

· Report abnormalities to QA Supervisor

· Prepare quality related reports

· Take part in ISO 9001:2015 IQA activities

Any other duties and responsibilities assigned by the Company from time to time

Physically Fit, able to carry at least 10kg machine parts

Work Place : Pasir Ris (2 weeks training @ Woodlands)

Working Day : 5.5 days

Working Hour : 8.30am to 6pm, 8.30am to 12.30pm

OT available

HOYA Technosurgical, is a subsidiary of HOYA Corporation, established in Tokyo, Japan in 2013, which has the origin of PENTAX medical business unit in 1974 arising from the merger of former PENTAX medical business unit & Japan Universal Technologies, Inc. HOYA Technosurgical has set up their first overseas plant in Singapore focusing on manufacturing, research & development and sale of Chromatography Media to pharmaceutical companies.

Job Responsibilities

• Support in the setup of manufacturing facility and process documentation
• Build and train Operators in the operations of machinery and maintenance in compliance with GDP, quality and other relevant company’s standard
• Achieve efficiency, productivity, safety, and quality for assigned processes
• Propose solutions to improve productivity and lead time
• Ensure regular maintenance of machineries to prevent machine down time. Monitoring the efficient, feedback to manager and related department
• Responsible for troubleshooting of daily operations issues
• Investigate and implement preventive actions at source
• Leading of yield/productivity improvement or cost reduction project
• Support Production and Final inspection process validation activity in IQ, OQ and PQ, which the validation of mass-production equipment, with approved development specification and plans
• Other activities as assigned by the supervisor

Education Qualification:

Diploma or Bachelor in Engineering (either industrial engineering, system engineering, mechanical, chemical)

Experience:

0 – 4 years or more experience(s) in chemical or medical devices industry

Functional Competency:

• ISO9001 and 14000
• Relevant working experience in process control and manufacturing operations
• Computer literate, proficient at Microsoft office
• Effective communication in English is essential and Japanese is a plus.
• Able to collaborate well within department to execute project tasks.
• Good analytical skills
• Ability to lead and coach team members

Job Duties and Responsibilities:

• Supervision, executing and coordinate project activities.
• Ensuring that the project is on-schedule, within budgeted cost, and quality standards.
• Review project plans, specifications, and drawings to ensure accuracy and feasibility.
• Coordinating with Clients and Suppliers to develop project schedules, and resources plans.
• Attending Clients coordination and technical meetings.
• Supervise constructions activities.
• Formulation of Method-Of-Statement, Risk Assessment and Safe Procedure
• Involvement in both internal and external WSH Activities.
• Maintain accurate and comprehensive project documentation, including daily report, inspection records and As-Built drawings.

Job Requirements:

• Minimum Higher NITEC/ Diploma in Engineering or related field.
• Proficient in MS Office applications
• Possess valid Singapore Class 3 driving License
• Good team player with ability to lead and multi task
• Good interpersonal skills and communication skills

Responsible for tooling drawings, specification filing and maintenance. Manage projects, ensure all tooling are executed smoothly and efficiently against an agreed plan. Perform evaluation and development activities to provide solutions for technical problems to sustain and improved production yield, quality, process cycle-time and cost reduction.

Ability to lead a group of Chinese Toolmakers and Technicians to ensure all molds repairs and maintenance meets all IATF 16949 standards and Customer Specific Requirements, including but not limited improving ensure product quality and manufacturing capabilities, eg Cpk Study.