Title: Manual Test Engineer

For quick response, please share your resume to [email protected] or WA to +65 92333815.

JD:

1. Candidate to have past system testing knowledge
2. Raise problem tickets to technology team for issues encountered in System testing
3. Create test cases based on user requirements
4. Escalate to managers / test leads in case of issues unresolved or blocking the test progress
5. Provide status updates on test progress and defects status on regular basis

Thanks, and Best Regards

Karanam Vijaya Kiran

(EA Registration no: R1443178)

HP: +65 92333815

Recruitment Manager

Helius Technologies Pte Ltd (EA Licence No: 11C3373)

Primary Objective(s) of Position
• Manage key phases of projects such as assembly, testing, installation, pre-commissioning, commissioning, troubleshooting, repairs and maintenance for the marine, power generation, petroleum, construction and industrial market segments.
• Responsible for product service support related work on both diesel and gas engines.
• Support the design and development of other aspects of projects, when required, including tendering, contract review, design, drawing, scheduling, purchasing, packing and shipment of marine and oil and gas engines, and respective associated propulsion and / or power generation systems, as per customers’ requirements.

Duties & Responsibilities
• Perform installation audit checks on engine set-ups at site and ensure equipment installations are according to manufacturer guidelines/recommendations, and generate report, as required.
• Perform pre-commissioning, commissioning and sea-trial activities (where applicable) at customer sites (in Singapore or overseas) to ensure proper equipment operation as per equipment manufacturers’ guidelines / customers’ requirements.
• Perform supervision of the assembly and packaging of engine and generator set packages at the workshop, inclusive of inspections and testing, as and when required.
• Configure engine settings and parameters to meet specific requirements.
• Utilize diagnostic tools, software and technical manuals.

Duties & Responsibilities (Cont’d)
• Investigate engine malfunctions, diagnose issues and identify root causes.
• Interpret error codes, schematics, and technical manuals to pinpoint root causes of engine malfunctions.
• Propose and implement effective solutions to resolve problems.
• Supervise the disassembly and reassembly of engines for repairs and overhauls, when required.
• Supervise the replacement of faulty components, bearings, seals and gaskets.
• Calibrate and fine-tune systems for optimal performance.
• Conduct functional tests of repaired or newly installed mechanical and electrical systems.
• Perform dyno / load testing on engines and generator set packages.
• Maintain accurate records of inspections, repairs, maintenance activities and testing results.
• Generate technical reports and service documentation for customers and internal use.
• Conduct on-site familiarisation training to operators, when required.
• Provide remote or on-site assistance for troubleshooting, technical support and guidance to customers.
• Attend / Conduct engineering and project meetings and on-site inspections both in Singapore and overseas (when required).
• Adhere to safety protocols and regulations while working on engines to prevent accidents and ensure a safe working environment.
• Other ad hoc tasks as assigned by management.

Person Specifications
• Possess a diploma/degree in Mechanical or Automotive Engineering.
• At least 2 to 3 years of working experience in related industry.
• Strong understanding of diesel and gas engine principles, components and systems.
• Proficiency in diagnosing and troubleshooting engine issues.
• Able to read and interpret technical manuals, schematics and engineering drawings.
• Attention to detail and commitment to safety.
• Good problem-solving skills and attention to details.
• Effective communication skills for interacting with customers and colleagues.
• Ability to work independently and as part of a team.
• Must be able to travel overseas as and when required.

1. Provide timely and effective technical support for application-related incidents and service requests.

2. Troubleshoot and resolve application issues, both independently and in collaboration with development teams.

3. Monitor application performance, identify bottlenecks, and implement performance enhancements.

4. Conduct root cause analysis for recurring issues and implement preventive measures.

5. Collaborate with internal stakeholders to gather requirements and provide recommendations for application improvements.

6. Maintain documentation related to application configurations, troubleshooting procedures, and known issues.

7. Participate in application deployment and release management activities.

8. Stay updated with industry trends and emerging technologies to drive continuous improvement in application support processes.

9. Support UAT and Interface Testing

Requirements:

1. Must have minimum 5 years experience.

2. Strong technical knowledge and experience in supporting enterprise-level applications.

3. Proficiency in troubleshooting application issues, performing log analysis, and using monitoring tools.

4. Experience with databases and SQL query language.

5. Familiarity with software development life cycle (SDLC) and ITIL principles.

Preferred Skillset

• Java

• Oracle Database

• MySQL Database

• Jira

• Excel

• Diploma / Bachelor's degree in a related filed or equivalent experience.
• Minimum 1 year of experience in installation of Electricla and communication infrastructures.
• Prior experience in Railway preferred.
• Oversee the installation of various systems, equipment or machinery.
• Ability to work in a fast-paced environment.
• Team player with good interpersonal and communication skills
• Able to work indepdently with minimum supervision.
• Candidate with 5+ years of experience will be considered for Managerial role.

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Act as the main technical adviser on a construction site for subcontractors, craftspeople, and operatives & junior Engineers.

· Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.

· Responsible to ensure that all materials used, and work performed are in accordance with the specifications & budget.

· Responsible for work progress timescales. (In charge area)

· Supervising of project crews.

· Coordination with consultant traffic team for timely submission and obtaining approval of temporary and permanent traffic diversion plan.

· Coordination work with authorities, clients and QP.

· Coordination with LTA term contractors (traffic light and street lighting).

· Ensure safety, health & security of the in-charge area.

· Assist in preparation of Approve-In-Principle (AIP), Preliminary, pre-final and final submission drawings with consultant for LTA, NPARKS, PUB and BCA submissions.

· Attending and preparing minutes for meeting with clients, consultant and technical agencies such as NPARKS, PUB, HDB, URA and etc

· Liaise and coordinate with interfacing contractors on traffic diversion matters.

· Assist in planning and execution of works

· Review method statement for various construction works and traffic diversion and traffic control plan for submission to LTA.

· Take part in briefing with sub-contractors on the technical

· Deal with arborist on site works to meet NPARKS requirement

Qualifications and Education Requirements

· Minimum 10 years of working experience in road alignment design and traffic engineering after tertiary education. Shall be well versed and have experience in LTA’s design standards.

We are seeking an experienced Senior Software Engineer with expertise in C++ or Java to join our client team. The ideal candidate will have at least 4 years of hands-on experience in software development and a passion for building high-performance, reliable, and scalable systems.

Responsibilities:

• Design, develop, and optimize software solutions using C++ or Java, ensuring high performance and reliability.
• Collaborate with cross-functional teams to define, design, and ship new features or improve existing systems.
• Troubleshoot and resolve complex technical issues, ensuring minimal downtime and optimal system performance.
• Lead code reviews to maintain coding standards and mentor junior developers.
• Contribute to system architecture discussions and help design scalable and efficient software systems.
• Develop and implement unit tests, integration tests, and documentation to ensure code quality.
• Stay updated with the latest trends and advancements in C++/Java and related technologies.
• 
  

Requirements:

• A graduate in Computer Science, Software Engineering, or a related field.
• At least 4 years of professional experience in software development with a strong focus on C++ or Java.
• Solid understanding of object-oriented programming (OOP) principles and design patterns.
• Experience with multithreading, memory management, and performance optimization in C++ or Java.
• Proficiency in working with databases (e.g., MySQL, PostgreSQL, or NoSQL databases).
• Familiarity with version control systems (e.g., Git) and CI/CD pipelines.
• Excellent problem-solving skills and the ability to work effectively in a collaborative environment.
• Knowledge of cloud platforms (e.g., AWS, Azure, GCP) and containerization (e.g., Docker, Kubernetes).
• Experience with frameworks/libraries such as Spring (for Java) or Boost (for C++).
• Familiarity with network programming, real-time systems, or distributed computing.
• Exposure to Agile development practices and tools like JIRA.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Roles & Responsibilities

• Assist Project Manager to ensure project is progressing as planned and is completed on time within budget, contractual and Safety standards.
• Assist Project Manager to ensure all site works are done accordingly to specifications and to relevant authorities’ requirement.
• Prepare & submit drawings, materials and necessary documents to consultant for approval.
• Check working drawing, identify discrepancies for resolution.
• Maintain inspection records of works, materials and all completed works.
• Keeping track on variation and claims of contract and cost impact and feedback information to the Project Manager.
• Implement cost control measures to meet project budget.
• Site co-ordination with all concerned parties and to resolve site issues.
• Handle any other ad-hoc duties and tasks assigned.

Requirements

• Candidate must possess at least a PEB/BCA recognized degree in Civil Engineering
• Minimum 3 years on site experience in Civil Engineering and Infrastructure works in Singapore
• Computer literate with knowledge of MS Project, Primavera, BIM and AutoCAD
• Ability to work independently and communicate at all levels.
• Advantageous to possess Class 3 Driving License

**Please submit your complete CVs exclusively in written form to [email protected]**

As a Cloud DevOps Engineer, you will run and support the company’s software application infrastructure in the cloud, ensuring the optimized use of resources to scale.

What will you do

• Design, develop, and implement cloud infrastructure as code using Terraform.
• Manage and optimize cloud resources for cost-efficiency and performance.
• Secure infrastructure by implementing best practices and adhering to security compliance standards.
• Implement robust monitoring and alerting systems for infrastructure resources.
• Collaborate with developers and operations teams to integrate infrastructure changes seamlessly into the software development lifecycle.
• Champion DevOps best practices for cloud infrastructure management.
• Setup, monitor and support CI/CD pipeline on premise or in the cloud.
• Stay up to date on the latest AWS services and Terraform features.

What do we expect

• Proven experience as a DevOps Engineer with at least 3 years of experience (with a focus on AWS cloud infrastructure).
• Implementation proficiency in service control policy and account governance (Control Tower, OU management, etc.).
• Enable and configure AWS VPC flow logs, load balancer logging, direct connect, AWS VPN, TGX etc.
• Experience managing Unix/Linux environments.
• Extensive experience in scripting in languages such as Python/Ruby/Perl and shell scripting.
• In-depth knowledge and experience with AWS services (EC2, S3, VPC, IAM, etc.).
• Expert-level proficiency in Terraform, including writing reusable modules and leveraging best practices.
• Able to troubleshoot infrastructure issues in cloud, identify root cause and implementation improvement and fixes.
• Good knowledge of microservices architecture, container technologies (Docker, Kubernetes).
• Expertise in Git and GitOps philosophy.
• Good people skills, teamwork, collaboration with cross function and cross-geo teams.
• Self-motivated, willing to learn new technologies continuously.
• Maintain documentation for design, integration, testing, and deployment.

Good to have

• Relevant DevOps certifications (e.g. AWS).
• Some experience with other cloud providers like Azure and GCP.
• Experience with CI/CD pipelines and integrating infrastructure provisioning with development workflows.
• Knowledge on mobile and web applications development.
• Knowledge of big data and data analytics infrastructure in cloud.

Roles and Responsiblities

1. Site project management.

2. Overall project planning, scheduling, monitoring and updating to meet project completion targets.

3. Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

4. Work closely with sub-contractors on project progress and ensure timely work arrangements

5. Liaise with consultant and carry out site inspection.

6. Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

7. Preparation of structural analysis, loading calculation and drawings.

8. Establish good relationship with all relevant parties.

9. Ensure site safety & compliance to authorities’ requirements.

10. To take on PE Assignee supervision role.

Requirement

1. Degree in Civil Engineering or relevant Engineering

2. Min. 3 years’ experiences.

3. RE registration with IES

4. Experience in Infra-structure project more than 200million.

Other informaiton :

Work location at Bugis

To Apply

Please submit updated CV with below details.

• Current & Expected Salary

• List of Projects Handled

• Notice Period

Role & Responsibilities:

• Develop, implement, and manage security controls to block and mitigate security threats across the IT infrastructure.
• Understanding of perimeter and endpoint security solutions and able to create policies based on requirements.
• Evaluate and perform analysis of the business risks and control environment to identify weaknesses and design the control to operate effectively.
• Regularly review and fine-tune existing policies to ensure they remain effective and up to date with the evolving latest security threats and best practices.
• Collaborate with other teams to ensure policies are aligned with organizational goals and compliance requirements.
• Troubleshooting policies if they are not working as intended.
• Monitor and Analyze Security Events: Continuously monitor security events and alerts, analyze potential threats, and take appropriate actions to prevent security incidents.
• Policy Development: Develop and maintain security policies, procedures, and guidelines to ensure compliance with industry standards and best practices.
• Incident Response: Collaborate with the incident response team to investigate and respond to security incidents, providing expertise on security controls and mitigation strategies.
• Reporting and Documentation: Maintain detailed documentation of security controls, configurations, and incidents. Prepare regular reports on the effectiveness of security controls.
• Training and Awareness: Provide training and guidance to other team members and stakeholders on security controls and best practices.

Skillset (Must have):

• Experience: Work experience in cybersecurity, with a focus on policy creation, monitoring, and incident response.
• Technical Skill: Skilled in managing NDR, EDR, WAF, email security, and DLP policies. Strong understanding of endpoint/network security, threat detection, and incident response. Proficient in SIEM data querying and analysis.
• Analytical Skill: Excellent analytical and problem-solving skills, with the ability to analyze complex security issues and develop effective solutions.
• Communication Skill: Strong written and verbal communication skills, with the ability to convey technical information to non-technical stakeholders.
• Team Player: Ability to work collaboratively with cross-functional teams and build strong working relationships.
• Accountability and Responsibility: Take ownership of assigned tasks and projects, ensuring they are completed on time and to the highest standards. Proactively identify areas for improvement and take the initiative to address them.
• Critical Thinking: Apply critical thinking skills to analyze complex security issues, evaluate potential solutions, and make well-informed decisions.
• Independently perform tasks and responsibilities with minimal dependency and guidance, while continuously learning and adapting to evolving technologies.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Basic Qualification : At least ITE or Diploma in Electrical / Electronics

Minimum Experience : Fresh Grads /1 year working experience in installation in the field

of People Counting System, CCTV, Electronic Article Surveillance (EAS), Alarm System, Trouble Shooting, PC

literate.

Expected Skills : Knowledge of electrical & electronics

Good project supervision & documentations control

Independent

Driving Licence : Class 3 is required

Others : Able to communicate in English & Mandarin

5 days week – Monday to Friday 8.30am to 6.00pm

Lunch break : 45mins

Salary Range : $2K to $2.5K

Job Description

• Report to the Asst. Service Manager
• Responsible for project, implementation, installation, testing & commissioning of the system
• To carry out the maintenance works and services according to the maintenance contract.
• To manage and supervise the work progress of each project site by attending regular site meetings, coordinating with appointed sub-contractors of various services to see to ensure that projects are completed on schedule.
• To ensure proper and accurate records and documentations for the repair & servicing
• To standby and attend service calls

Location: Bukit Merah Central

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsible for day to day facility operations which include maintaining uptime and operations of air-conditioning systems, carry out building maintenance, servicing and trouble-shooting.

Ensure all facilities service are smooth and uninterrupted at all time.

Co-ordinate and follow up with WSH Officer and Safety Manager on all statutory requirements.

Requirements:

Secondary Education or Diploma or NITEC certificate (Electrical certificate) with minimum 2 year’s relevant working experience

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

The Site Engineer (Civil) is responsible for assisting the PM on the progress of site works and manpower related aspects of the project. He/She will be required to:

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Monitor and supervise Workheads/Foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical diculties.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.

Job Description

Assisting Project Engineer with daily site activities.

Formulation of procedures for construction activities.

Attendance and contribution for prestart, internal, HSE and client meetings.

Requirements

Atleast 2 - 3 years of working experience in construction field

Degree in Civil Engineering or its equivalent

We are seeking an experienced Middleware Engineer to join our team. The successful candidate will be responsible for administering, supporting, and maintaining middleware products, including but not limited to IBM WebSphere, Oracle WebLogic, JBOSS EAP, IBM HTTP servers, Oracle HTTP servers, and IBM WebSphere MQ (WMQ). This role requires a strong technical background, excellent problem-solving skills, and the ability to work both independently and collaboratively in a dynamic environment.

Key Responsibilities:

• Administer, support, and maintain middleware products (IBM WebSphere, Oracle WebLogic, JBOSS EAP, IBM HTTP servers, Oracle HTTP servers, IBM WMQ).
• Install, configure, and maintain JBOSS EAP, IBM WebSphere Application Server (WAS), Oracle WebLogic, and IBM WebSphere MQ (WMQ).
• Assess system needs, identify appropriate changes, and make recommendations for improvements.
• Perform middleware system administration tasks, including troubleshooting, monitoring, problem resolution, system security, and change implementation.
• Plan, prepare, and apply maintenance fixes and upgrades for JBOSS EAP, WMQ/WAS, and other middleware platforms.
• Assist with high-level debugging, including heap and thread dump analysis, to support application teams.
• Provide detailed documentation for middleware installations, configurations, and administrative processes.
• Work individually or as part of a team on system projects related to UNIX, Linux, Windows, and application support.
• Provide on-call support for middleware systems as required.

Experience Required:

• 6+ years of experience managing middleware platforms, including IBM WebSphere Message Queuing, Application Server, JBOSS EAP, and Oracle WebLogic.
• Strong UNIX/Linux operating system administration experience.
• Deployment and administration of JBOSS EAP in enterprise environments.
• Experience deploying clustered, highly available middleware platforms.
• Familiarity with database integration is a plus.
• Experience with scripting languages to automate tasks is an advantage.

To apply, simply click the "Apply" button or send your updated profile to [email protected]

EA Licence No.:18S9405 / EA Reg. No.:R1330864

Percept Solutions is expanding and actively seeking talented individuals. We encourage applicants to follow Percept Solutions on LinkedIn at https://www.linkedin.com/company/percept-solutions/to stay informed about new opportunities and events.

· Ability to resolve machining problems appearing on parts by analysing the regular test cuts usually provided with the Maintenance literature.

· Ability to resolve machine service , Maintenance tasks of the complex nature without Technical assistance.

· Ability to resolve application problems of a normal complexity by occasionally seeking the assistance from experienced Application Engineer.

· Ability to recommend solutions to customers.

· Provide training to customers when required.

· May supervise a less experienced service on a task related to the preventive maintenance, repair and/or installation of Machine.

· Ability to perform on site audit and provide support for customer sale.

· Customer orientated and self-driven.

· Strong and dynamic leader with active listening, understanding and problem solving skills.

· Analytical approach to complex problems, ability to prioritize, reliable, and independent

To assist Design for Safety Professional to carry out following duties:

• Recognise the importance of design for safety and health of a construction project to eliminate or mitigate such risks throughout the different life cycle of a building and structure
• Recognise, and advise stakeholders on, the duties and responsibilities of DfS Professionals in accordance with relevant legal requirements and WSH (DfS) Regulations
• Prepare for DfS review meetings in accordance with WSH (DfS) regulations
• Coordinate DfS review meetings for consideration of safety and health risks during different phases in the lifecycle of a building and structure
• Apply hazard identification tools and risk assessment for DfS review meetings in accordance with organisational procedures
• Establish types of safety and health records to be kept in the DfS Register in accordance with WSH(DfS) regulations
• Coordinate the flow of relevant information to stakeholders throughout the construction project
• Familiar with Design for Safety Guidelines of MOM
• Able to work with consultant team to carry out Design for Safety Review Meetings / Workshops in accordance to GUIDE 1, GUIDE 2 and GUIDE 3 according to MOM regulations
• Prepare and Maintain Design Risk Registers
• Prepare Design Risk Register documentation and handed over to relevant parties

COTS Engineer

Responsibilities:

• Assist Business Analysts (BA) in the elaboration of user stories.
• Collaborate with Quality Assurance (QA) to develop test automation scripts and address bug fixes.
• Support DevOps in the automation of build and release processes.
• Design and deliver functional software applications that exceed customer expectations.
• Enhance software quality by employing XP (Extreme Programming) practices such as code review and unit testing.
• Adhere to the Software Craftsmanship Manifesto.
• Prepare architectural and other technical documents.

Experience and Skills Needed:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines.
• Familiarity with Git.
• Experience with Continuous Integration.
• Experience in working with agile teams, including Test-Driven Development (TDD), Pair programming, and Scrum.
• Proficiency with both Windows and UNIX/Linux servers.
• Knowledge of Design Patterns.
• Familiarity with Unit Testing.
• Strong presentation and listening skills.
• Exposure to mobile application development is a plus.
• Working experience in Agile and UX development environments is advantageous.
• Proficiency with business process modeling techniques and BPMN (Business Process Model and Notation) is a plus.
• Experience in the development of internet and intranet applications is beneficial.
• Hands-on configuration experience in administering and managing COTS (Commercial Off-The-Shelf) products and features, including but not limited to rules engine, workflow, process logic, data validations, screen flows, and page layouts with products like Salesforce, ServiceNow, Sharepoint Online, Dynamics 365, etc., is advantageous.
• Experience with designing custom objects, fields, functions, layouts, processes, or validation rules is an asset.

JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical Installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical Installation, testing and commissioning

JOB REQUIREMENT

• Bachelor's degree in Electrical & Electronic engineering.
• Minimum 3 years work experience in process plants or in the water/wastewater industry, with good knowledge in electrical desgin of water and/or wastewater treatment plants.
• Familiarity with AutoCAD, Navisworks.

Job Description:

• Develop and maintain responsive web applications and user interfaces.
• Collaborate with backend developers to integrate APIs and services.
• Write clean, maintainable, and efficient code using modern frameworks and libraries.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Ensure applications are optimized for maximum speed and scalability.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in frontend development.
• Proficiency in HTML, CSS, and JavaScript.
• Familiarity with frameworks such as React, Angular, or Vue.js.
• Knowledge of responsive design principles and cross-browser compatibility.
• Strong problem-solving skills and attention to detail.

Job Description

• Responsible for Equipment Uptime, Productivity

• Work in a cleanroom environment for long hours

• In-charge of PM planning, Equipment Maintenan

Management.

• Co-work with Engineer to resolve equipment/line

• To improve and enhance machine performance a

machine capability.

• Perform any other duties as assigned.

Job Requirements

• Diploma/Higher Nitec/Nitec in Engineering (Elect

Mechanical), or equivalent.

• Proficiency in Microsoft Office.

• Ability to work independently as well as in a team

• Shift work required.

• At least 2 years of relevant working experience inenvironment.

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: West
• Salary: Basic up to $3,600 + Allowance $100 + AWS + VB

Job Description:

• Oversee, manage, and coordinate project activities alongside a team of Engineers and Technicians to ensure successful project completion.
• Track and manage project progress to meet timelines, stay within budget, and maintain quality standards.
• Collaborate closely with consultants and clients to ensure project requirements are met.
• Conduct system programming and troubleshooting during the project implementation phase.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015