Description

· Technical & Helpdesk Support, IT/Computer - Hardware, IT/Computer Network/System/Database Admin, IT/Computer - Hardware

· Installation and configuration of office broadband, firewalls, servers, routers, and workstations, as well as office relocation

· Server and Storage Consolidation, Data Protection and Retention

· Virtualization and Cloud Computing Solutions. Inventory control of laptops and licenses and maintain serial numbers.

· To initiate approval and asset write-offs for IT equipment.

· Monitoring, assigning, and purchase requisition laptops and licenses.

· Evaluate the various PCs and laptops' performance and support levels, and make any required recommendations for future purchases.

· Assist with technical and help desk issues.

· Setup a Virtual Private Network (VPN).

· End-user support (Remote Access, Teamviewer support)

· Conduct an internal compliance audit on a regular basis to prevent illegal software and program downloads.

· Coordination of IT Compliance and Audits

· Review and improve company IT Policy

· Drive Security Awareness

· Keep laptops in good working order for troubleshooting, security, and other purposes.

· Responsible for cybersecurity of our system

Requirement:

· Bachelor Degree in Computer Science and /or with IT-related discipline in relevant professional certifications.

· Minimum of three years' experience working in an IT security-related capacity, with a thorough awareness of cybersecurity frameworks and standards.

· Automation Champion. Network Supervision.

· Citizens of Singapore are encouraged to apply

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Sales Engineer (Marine Engineering)
• Working Location: Monday – Friday, 9am – 5.30pm (One Saturday per month, 9am – 12pm)
• Working Hours: Tuas West
• Salary Package: Up to $3,800 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Prepare and deliver technical presentations to explain products or services to customers.
• Coordinate with customers and the engineering/operations department to assess service job requirements.
• Collaborate with administrative staff for efficient engineer deployment.
• Secure and renew orders, including managing overseas delivery and logistics.
• Work closely with other sales teams to understand customer needs and provide sales and technical support.
• Perform any other ad-hoc duties as assigned by the department head.

APPLY NOW!!!

• Bachelor's degree in Marine Engineering or a related field.
• Minimum of 1 year of experience in the Marine Industry.
• Strong technical knowledge of marine engines and spare parts.
• Willingness to work hands-on.
• Willingness to travel across various Asian countries for sales promotions and client meetings.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70837 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: High Speed Networking Service Provider
• Position Title: Field Service Technician/ Engineer
• Working Location: Ubi (Nearest MRT: Tai Seng) – Company transportation provided to travel to client location
• Working Hours: Monday to Friday, 9.00 am – 6.00 pm
• Salary Package: Up to $3000 + OT (Dependent on project) + Performance Bonus
• Duration: Permanent

Key Responsibilities

Field Service Engineer

• Work as part of a team to install, test, and commission company equipment, ensuring all systems are fully operational and meet client expectations.
• Assist with the setup and configuration of network-based systems, ensuring connectivity and functionality.
• Set up and configure security surveillance systems and access control systems, ensuring proper functionality and client satisfaction.
• Install and maintain radio communication equipment, ensuring uninterrupted communication services.
• Regularly service and maintain installed equipment to ensure optimal performance, including troubleshooting and repairs when necessary.
• Assist in project planning, coordination, and execution, ensuring timely completion of assignments.
• Participate in on-the-job training under senior engineers, developing your technical skills and expanding your field of expertise.

Field Service Technician

• Perform accurate installation and laying of electrical cables to ensure proper connectivity, adhering to industry standards and safety protocols.
• Assist in the testing and commissioning of electrical systems, ensuring that all equipment is safely operational and meets performance standards.
• Conduct routine general maintenance on installed electrical systems and equipment to maintain optimal functionality and reduce downtime.
• Diagnose and fix electrical faults and malfunctions, ensuring that issues are resolved promptly to minimize disruptions.
• Follow all safety regulations and protocols to ensure a safe working environment, including the proper use of personal protective equipment (PPE).
• Work closely with other technicians and engineers to complete tasks efficiently and effectively, ensuring all project goals are met on time.
• Training & Development: Participate in ongoing training programs to stay updated on the latest industry trends, electrical techniques, and safety standards.

APPLY NOW!!!

• Min. NITEC in Electronic or Electrical
• 1 year’s experience working with security surveillance systems, access control, or radio communication equipment preferred
• Training provided for those without experience
• Class 3 driver’s license preferred

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #70103 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Title: Senior Simulation Engineer - Electrochemical Modeling

Location: NTU-Durapower Advanced Lithium Battery Joint Lab, #02-01, 1 Cleantech Loop, Singapore 637141

Overview:

We are seeking a passionate and experienced Senior Simulation Engineer specializing in electrochemical modeling to join our innovative Battery Material Research Division. This role is crucial in advancing simulation technologies to evaluate and optimize battery performance, safety, and longevity. It emphasizes a hands-on approach to laboratory experiments and leveraging simulation tools to develop cutting-edge lithium-ion and solid-state battery technologies.

Job Scope: Senior Simulation Engineer - Electrochemical Modeling

Key Responsibilities:

• Conduct research into battery working principles and failure mechanisms, developing multiscale and multiphysics-based battery models for rapid performance evaluation and diagnosis.
• Establish and refine electrochemical models, perform parameter determination, and execute numerical calculations and result analyses.
• Explore and implement simulation technologies to assess battery electrical performance, thermal runaway safety, and life prediction, providing actionable insights for the team.
• Utilize simulation outcomes to optimize existing product designs and propose innovative product design strategies.
• Design and execute experiments to generate data for training, validating, and testing battery models.

Key Requirements:

• Bachelor’s, Master’s, or PhD in Mathematics, Physics, Chemistry, Materials Science, or relevant Engineering disciplines.
• Strong foundation in lithium-ion cell electrochemistry and mechanisms.
• Hands-on expertise with battery testing equipment, protocols, and physical-chemical evaluation techniques.
• Proficiency in electrochemical simulation and algorithm development software, such as COMSOL, MATLAB/Simulink, or equivalent tools.
• Practical experience in experimental battery research, including DOE design and analysis. Capability in electrochemical testing and analysis of battery materials.
• Strong analytical and problem-solving abilities.
• Collaborative and detail-oriented mindset, with effective communication skills for cross-functional teamwork.
  

Junior Radio Frequency Design Engineer

About Doodle Labs

Doodle Labs is the global leader in high-performance private wireless systems. We build cutting-edge mesh networks for robotics, drones, and the Industrial Internet of Things. Doodle Labs has experienced rapid growth over the past five years as our radio systems have been adopted by Fortune 500 companies (e.g. Airbus, General Electric) and industry-leading innovators (e.g. Boston Dynamics, FLIR).

Your Opportunity

Doodle Labs develops market-leading broadband mesh radios. Products include handheld mesh hotspots (Wearable Smart Radio) and tiny embedded multi-band radios for robots (Helix). Your opportunity is to build novel RF products while implementing Doodle Labs’ patented RF techniques. You will design and develop next generation wireless communication systems utilizing Wi-Fi 4/5/6/6E chipsets and protocols.

Job Description

· Perform detailed radio frequency translation plans and architectures

· Evaluate gain, noise parameters (NF, SNR), dynamic range, linearity, and power consumption analyses to execute a predictable, robust design

· Collaborate with CAD engineers and drive PCB implementation of the design with emphasis on clean power supply design, interconnect design for required EMI and RF transmission performance

· Participate in design reviews and prepare design documentations at every stage of development until the final prototype test and characterization

· Perform parametric evaluation of transceivers, like Pout, IMD/IP3, EVM, noise parameters with spectrum analyser, modulation analyser and perform wireless link level functional evaluation to complete the product characterization

· Collaborate with product engineers for various certification procedures and NPI, followed by the Transfer of Technology (ToT) for large quantity production

Job Requirements

· Bachelor’s, Master’s, or PhD in Electronics Communication Engineering or Digital Communication Engineering

· Minimum 4 year of experience as a RF system hardware with proven track record of meeting industry delivery standards in the relevant areas

· Good interpersonal and creative skills with the ability to multitask in a demanding and fast paced environment

· Hands-on experience in the design and integration of RF, Analog, and Mix signal blocks such as PA, LNA, mixer, frequency synthesizer, filter, coupler, detector, microcontroller, etc., supplemented with knowledge of specification derivation from system level requirements

· Experience working with basic CAD tools and competence in evaluation flow and operation of appropriate test equipment to evaluate product performance

· Experience in script writing such as Bash, python etc., will be a plus as it is used in test automation

Responsibilities:

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• sponsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• · Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs

Requirements:

• Degree in Mechanical Engineering
• At least 8 years in mechanical maintenance
• Experience in power plant or related process plant experience
• Leadership experience will be a plus

Account Manager:

Kerwin Tan Kai Bin (R1331624)

[email protected]

EA16S8107

Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: R&D Electrical Engineer
• Working Location: Central
• Working Hours: Monday to Friday (8.45 AM – 5.30 PM)
• Salary Package: Basic Salary up to $3,800 + AWS + Bonus + Transport Allowance + Flexible Benefits
• Duration: Contract (3 years – Renewable)

Key Responsibilities

• Use 3D CAD design tools and perform high-precision 3D printing (FDM & DLP).
• Build simple circuit boards for sensor control and data acquisition using basic microcontroller boards like Arduino, ESP32, or STM32.
• Test and assemble electronic and mechanical parts, and debug software using basic tools like Python or C++.
• Maintain laboratory inventory and handle laboratory administrative tasks (procurement, equipment maintenance/repairs, and safety matters).
• Perform administrative tasks, such as ordering and payment using the SAP system.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• NITEC/Diploma in Electrical Engineering, Mechanical Engineering, Bioengineering, or relevant discipline
• Basic experience in 3D CAD design software, like Solidworks and Fusion360
• Has experience with microcontroller boards like Arduino, Esp32, STM32
• Basic experience in handling simple electronics and basic hands-on soldering skills

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68612 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Contract Period: From April 2025 for 24 months

Working hours:

Total about 80 hours/month

· Mondays to Fridays: 8.30 am to 12.30pm by default or

· Mondays to Fridays: 1.30 am to 5.30pm when required by the Board

· Lunch break 1 hour (Mon to Fri), time to be 12.30pm to 1.30pm.

Scope of works:

· Assist in the planning stages by providing technical input on the feasibility, safety, and environmental considerations of the Demolition and Land Reinstatement.

· Coordinate with various stakeholders, including contractors, subcontractors, and regulatory authorities, to ensure project alignment.

· Supervise all on-site activities related to demolition and reinstatement, ensuring compliance with the project plan, safety regulations, and quality standards.

· Conduct regular site inspections to monitor progress and ensure that all work is executed as per the design and specifications.

· Implement and enforce safety protocols to prevent accidents and ensure the well-being of all site personnel.

· Review and approve method statements, risk assessments, and safety plans provided by Contractors.

· Ensure that the materials and the workmanship meet the required standards and specifications.

· Address any non-compliance issues by directing corrective actions and overseeing their implementation.

· Maintain detailed records of the project’s progress, including daily logs, material delivery notes, and site reports.

· Prepare and submit regular progress reports to the project manager and client, highlighting any issues, delays, or deviations from the plan.

· Provide on-the-spot solutions to technical challenges that arise during the demolition or reinstatement process.

· Liaise with design engineers and other experts to resolve complex technical issues.

· Oversee the final inspection and testing of the reinstated plant facilities to ensure they meet tender requirements.

· Manage the handover process to the authorities, including the provision of asbuilt drawings, operation manuals, and maintenance schedules.

· Specific Project Scope Responsibilities by liaising with the main contractor (not limited to):

- Structural Assessments: Conduct or oversee detailed structural assessments to determine the safety and stability of existing structures before demolition.

- Geotechnical Surveys: Carry out geotechnical surveys to assess soil stability, bearing capacity, and potential issues related to ground movement during demolition.

- Real-Time Sensors Monitoring During Demolition: Ensure integration of sensors in the demolition works by the Contractor for real-time data collection and analysis, improving decision-making and risk mitigation management. E.g. Structural Integrity Monitoring, Vibration Monitoring, Air Quality Monitoring, Noise Level Monitoring, Temperature and Fire Detection, Ground and Soil Movement Monitoring, Worker Safety Monitoring that project is completed safely and within regulatory frameworks.

- Environmental and Safety Compliance: Ensure that the demolition and reinstatement processes comply with environmental and safety regulations.

- Monitoring and Reporting: Regularly monitor site conditions, progress, and quality of work, providing detailed reports to project managers and stakeholders.

- Risk Management: Identify potential risks associated with the demolition and reinstatement process, particularly related to structural integrity and ground stability, and develop mitigation strategies.

Qualification, skill, experience:

· A Bachelor's degree in Civil Engineering or GeoTechnical Engineering from a recognized institution or equivalent is necessary.

· Professional Engineer (Singapore PE in Civil or Geo-Technical) license is preferred.

· Certifications in safety management (e.g., OSHA, NEBOSH) or environmental management is advantageous. Registration with a relevant professional body (e.g., The Institution of Engineers Singapore, IES) is beneficial.

· A about of 5 years of relevant experience in Civil /& GeoTechnical engineering, particularly in projects involving demolition, structural assessments, and construction. Experience in large-scale industrial or plant settings or large infrastructure projects including relevant water retaining structure construction experience is preferred.

· Experience in managing large-scale projects, including coordinating with various stakeholders, ensuring compliance with regulations, and handling complex logistics.

· Proficiency in civil structural analysis for designing and reviewing plans and project management.

· Skills in geotechnical analysis, soil mechanics, and foundation engineering.

· Thorough understanding of local and international standards, codes, and regulations related to demolition and construction.

· Ability to lead a multidisciplinary team, including site engineers/resident technical officers, contractors, and safety officers.

· Strong communication skills for liaising with clients, regulatory bodies, and contractors.

· Competence in preparing detailed reports, technical documentation, and ensuring all communications are well-documented.

Responsibilities

• Collaborate with the production and planning teams to prioritize tooling schedules based on the current tool status and production demands.
• Provide technical support to the tool designing and sales teams, ensuring that customer requirements are met through effective tooling solutions.
• Take a leadership role in problem-solving and troubleshooting within the tooling team, identifying root causes and implementing corrective actions.
• Support continuous process improvements for tooling and work processes to enhance productivity and efficiency across the department.
• Work closely with the toolroom to identify machining needs for tooling modifications and improvements, ensuring tool readiness for production requirements.
• Oversee and guide the toolmakers, training them to enhance their skills and ensuring high-quality standards are maintained in all tooling activities.

Requirements:

• Diploma in Precision Engineering or equivalent.
• Technical qualification in Tool & Die Making or a related field.
• Ability to lead and manage a team, fostering collaboration and continuous improvement.
• Strong problem-solving skills with experience in root cause analysis and troubleshooting.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: L739Y7RX

Key Roles and Responsibilities

• Assist the Site Project manager in monitoring and managing the day-to-day operation of the projects.
• To support Site Project Manager in managing day-to-day clients’ interactions and expectations for optimal results
• To support Site Project Manager to collaborate with peers, liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare and submit method of statement, sketches, site record and other technical submissions in a timely manner.
• To prepare Inspection and Test Plan, user manuals, drawings and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification, and submit technical clarification to the clients and consultants.
• Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Assist the Project Manager in the preparation of reports and presentation to management, clients and stakeholders.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act
• Perform any other tasks as and when required so as to meet project milestones

Requirements

• Min Diploma or Higher Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 3 years working experience
• Hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must
• Hands-on experience in security system configuration, System Networking and integration with third-party systems will be an advantage
• Willing to take ownership and Pro-active in Problem solving
• Must be a team player and strong verbal and written communication skills
• Customer service and business orientated with good initiative and adaptability
• Required to perform standby duties whenever required
• Driving License – Preferably if candidate possesses its own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road / Site Office
• 5.5 work days

A. Responsibilities

a) Knowledge of basic networking, Huawei switch and router basic operation.

b) Making network cable, installation of hardware and basic setup, Hardware spare replace

c) Understanding of operation process and procedure

d) L1 operation and support using Huawei basic operation GUI and tools, including daily health check, end user support, weekly/monthly routine operation

e) Basic trouble shooting, logs collection and on-site support

f) Other tasks assigned by customer

B. Requirement

a) Diploma or Bachelor's degree in engineering or computer science

b) The person should have 1 year of network engineer experience with the following skills and competencies:

c) Knowledge and experience on IP addressing and subnetting

d) Experience with coordinating with multiple vendors for network deployment

e) Pro-active, dynamic and with good analytical/conceptual thinking

f) Excellent English communication skills both written and verbal

g) Meticulous, dateline oriented and able to prioritize and multi-task

h) Prior experience within network engineering a bonus.

i) 1-2 years of experience in supporting complex banking IT environment or equivalent

Responsibilities:

• Implement simulation models of AI SoC or subsystem designs

• Perform computer architecture performance simulation

• Analyse experimental data and perform architecture explorations

• Identify bottlenecks in design and provide feedback on micro-architecture

• Propose chip architecture optimizations for chip performance, power, and area improvement

• Cross-team collaborations to deliver high quality chip products

• Validate the correctness of the AI chip designs

• Write patents

Qualification:

• Bachelor degree and above in Electrical & Electronic Engineering, Computer Science or equivalent

• Familiar with computer architecture, such as AI accelerator, CPU, network-on-chip, memory hierarchy

• Familiar with C/C++ language

• Familiar with computer architecture simulation is preferred

• Strong learning capability, good communication and collaboration skills

• Fresh graduates are also encouraged to apply

Multiple established M&E consultant firms.

Job Description

• Conceptualize M&E designs and execute the project with the detailed designs.
• Manage and engage client/consultant/ contractors and local authorities to drive project execution, submission to authorities and overall on-site construction supervision.

Requirement:

• A recognized university degree Mechanical or Electrical Engineering or Building Services.
• Minimum 3 years’ of relevant experience in design and implementation of building services.
• Strong team-working, communication and interpersonal skills. Able to build good working relationships with client and key stakeholders.
• Open to opportunities to be trained on a wide range of technical and management topics.
• Entry level will be considered for Engineer positions.

Key Responsibilities:

1. Application Support:

• Provide first-level support for application-related issues.
• Troubleshoot and resolve technical problems promptly.
• Escalate complex issues to higher-level support or development teams as needed.

2. Routine Maintenance:

• Perform regular maintenance tasks such as updates, patches, and backups. And code changes
• Deploy and test application in DEV and UAT before deploy to prod
• Ensure applications are running efficiently and securely.

3. User Assistance:

• Assist end-users with application-related queries and issues.
• Provide basic training and guidance on application usage.
• Document common issues and solutions for future reference.

4. Incident Management:

• Track and manage incidents using a ticketing system.
• Ensure timely resolution of incidents and communicate status updates to users.
• Participate in incident reviews and contribute to continuous improvement efforts.

5. Collaboration:

• Work closely with other IT teams to ensure seamless application integration and functionality.
• Collaborate with development teams to understand application changes and updates.
• Coordinate with third-party vendors for application support and maintenance

Preferred skill:

Java, JavaSript, Java (Spring boot), Corba, Maven, JSP, ActiveMQ, OracleSQL, SSH, Rehat/Linux, Debugging, React.js, Compiling, Software Architect Design, CI/CD, HTML, RESTFul API

• Ensures that the assigned infrastructure at the client site is configured, installed, tested and operational.
• Ensures that any software that is part of the solution is installed and configured according to client requirements.
• Proactively identifies problems and errors as they occur and logs such incidents in a timely manner with the required level of detail.
• Liaises with all stakeholders including client IT environments, carriers and colleagues to expediate diagnosis of errors and problems and to identify a resolution.
• Investigates second line support calls assigned and identifies the root cause of incidents and problems following knowledge articles.
• Responds to and diagnoses all alerts, escalate to L3 Field Engineer when unable to resolve within the stipulated time.
• Ensures incidents are updated with progress and resolution details in a timely manner using the required platform.
• Ensures the efficient and comprehensive resolution of incidents and requests.
• Applies tools, techniques and processes to track, log, report on and correct configuration items, components and changes.
• Investigates problems in systems, processes and services and assists with the implementation of agreed remedies and preventative measures.
• Provides second line remote and onsite technical support to clients.
• Provides second line field engineering services to clients.
• Reports and escalates issues to 3rd party vendors if necessary.
• Follows the required handover procedures for shift changes to ensure service continuity.

Knowledge and Attributes:

• Good communicate skills, both verbal and written.
• Ability to plan activities and projects well in advance and take into account possible changing circumstances.
• Ability to maintain a positive outlook at work.
• Ability to work well in a pressurized environment.
• Ability to work hard and put in longer hours when it is necessary.
• Ability to apply active listening techniques such as paraphrasing the message to confirm understanding, probing for further relevant information and refraining from interrupting.
• Ability to adapt to changing circumstances.
• Ability to place client at the forefront of all interactions, understanding their requirements and creating a positive client experience throughout the total client journey.

Academic Qualifications and Certifications:

• Bachelor's degree or equivalent in Information Technology or Computing or related field.
• Professional level certification in different Data Centre technologies such as Cisco, NetApp, EMC- Ex: CCNP (DC), ONTApp etc.
• Professional level certification in different Networking technologies such as Cisco, Juniper, Aruba, F5, CCNP, JNCIP, ACMP etc.

Required Experience:

• Basic understanding of Network routing and switching.
• Moderate level experience in Data Center technologies such as Cisco UCS server platform (B-series, E series blade servers, C-series rack servers), UCS Fabric Interconnects/ UCS Manager
• Moderate level experience in technical support to clients.
• Moderate level experience in diagnosis and troubleshooting.
• Moderate level experience providing remote support in Data Center and Storage technologies.
• Moderate level experience in relevant technology (VMware vCenter Server and ESXI, Netapp AFF / FAS, Dell Poweredge, HP Proliant, Microsoft Windows Server, RHEL / Ubuntu Linux)

Position: Production Engineer / Executive

• Location: Tanjong Penjuru
• Working hours: Mon to Fri from 7:30am to 5pm
• Salary: $3,500 - $4,000

Requirements:

• Min 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Computer literate.
• Knowledge in ISO is an advantage.
• Diploma or Degree in Manufacturing / Electrical /Mechanical / Engineering discipline

Responsibilities:

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with the HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practice. Also continually improve safety records by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas
• Evaluate, train and maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in the hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Developing Engineering Strategies.

• Implementing Engineering Strategies.

• Conducting Project Safety Briefing.

• Controlling Materials Order and Usage.

• Supervising your Construction Team.

• Increasing our Company's work quantity.

• Improving our Company's work quality.

• Reporting to the Director and ad-hoc duties.

Role:

Fire Protection Engineer

• Singapore Based (Working location: Changi Village)
• 5.5 Days work per week (Mon- Fri 8.30am-5.30pm; Sat 8.30am – 12.30pm)
• $3500-$5500
• Diploma / Degree in Mechanical Engineering/Building Services + 5 years of relevant experience
• Experience in Water Mist system and/or foam system is added advantage
• Career Progression Opportunities

Job scope

To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples

To liaise and work with relevant authorities, sub-contractors or clients on shop drawings, materials and samples

Review and align Fire protection design drawings to ensure compliance with design specifications and guidelines (Sprinkler System, Fire Alarm System, Hose reel System, Wet/Dry riser system, Fire Hydrant System, Fire man intercom system)

Knowledge in M&E and able to Identify discrepancies between M&E, structural, ID, architectural and client provisions

Manage and execute project as per the schedule

To attend meeting with contractors to address issues and update progress

Study and reviewing of drawings, specifications for compliance

Allocate work to supervisors and ensure jobs are correctly and properly achieved within standards and SOP.

Plan and lead testing and commissioning of the fire protection systems.

Follow up with site / authority inspections, defects rectifications of the fire protection work.

Plan and prepare OMM, training, As-Builts drawings for handing over of completed fire protection systems to client.

Follow up with maintenance of fire protection systems during DLP

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description:

• Customises CMS database checksheets and allocation of checksheets based on latest engineering drawing revisions and punchlist updates for mechanical/ process/safety /HVAC discipline
• Prepares boundary drawings as per subsystem listing
• Prepares procedures/ work method statements and risk assessment for mechanical/ process/ safety/ HVAC commissioning activities
• Attends Factory Acceptance Test at vendors' premises, as required
• Leads a team of mechanical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides
• Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability
• Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities
• Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner
• Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities, etc
• Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc
• Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures
• Reviews completed commissioning documentation such as checksheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.
• Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

Requirements:

• Min. 5 years years of commissioning experience in the Oil & Gas/ Wind Farm industty
• Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc
• Good knowledge and experience in commissioning activities of oil and gas/ wind farm facilities
• Familiar with permit-to-work systems and lock-out tag-out procedures
• Good analytical, problem solving and planning skills.
• Familiar with Project Specifications, Technical and HSE Standards
• Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.
• Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Working hours

(All Yards)

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

· Independent with minimum supervision.

· Lead a team of M&E subcontractors and vendors.

· Familiar in M&E compliances with codes and regulatory requirements.

· Supervise work execution and inspections with the Consultants.

· Coordinate internal resources and third parties/vendors for the flawless execution of projects

· Able to chair and/or attend site progress and coordination meetings, and involve in discussion on all project related activities with clients

· Monitor and control project site activities to ensure project is completed on schedule and within budget.

· Provide close monitoring and support (including hands-on) of project staff to ensure smooth and effective operation.

Experience in M&E testing and commissioning, and handing over to client.

Developing Engineering Strategies.

• Implementing Engineering Strategies.

• Conducting Project Safety Briefing.

• Controlling Materials Order and Usage.

• Supervising your Construction Team.

• Increasing our Company's work quantity.

• Improving our Company's work quality.

• Reporting to the Director and ad-hoc duties.

Job Description:

- Responsible for managing ACMV/Elec/Civil/Plumbing & Sanitary site works

- Responsible for manpower and resource scheduling and deployment, ensuring all works are carried out within schedule

- Coordinate and liaise with subcontractors regarding work progress, work acceptance, plan approval and other relevant matters

- Liaise with Consultant & subcons to resolve technical/site issues and attend site meetings when required

- Responsible for preparing, submission of method of statement and other required reports

- Conduct inspection with RE / RTO

- Monitor safety performance of subcontracts

- Report to the Project Manager (PM)

Job Requirement:

- Diploma or Degree in Mechanical/Electrical/Civil Engineering or equivalent

- Min. 8 years’ working experience in the construction industry

- Good communication skills to interact with people across all levels

- Knowledgeable in project management processes for all stages of project

- Experience in Wafer fabs, pharmaceutical will be advantageous

- Language (s): Mandarin, English (in order to liaise with the English & Chinese speaking associates)

JD for Cloud Deployment Engineer

Job Summary:

We are looking for a highly skilled Cloud Deployment Engineer to design, deploy, and manage Secure Hybrid Integrated Pipelines (SHIP) and Hive Agile Testing Solutions (HATS) in a government commercial cloud environment. The role requires expertise in cloud infrastructure, DevSecOps practices, and government compliance frameworks to deliver secure and scalable solutions.

Key Responsibilities:

1. Deployment & Integration

• Lead the deployment of SHIP and HATS solutions in government cloud environments, such as AWS, Microsoft Azure Government, or Google Cloud for Public Sector.
• Develop and implement Infrastructure-as-Code (IaC) templates for secure and automated deployments using tools like Terraform, CloudFormation, or Ansible.
• Integrate SHIP with existing Continuous Integration/Continuous Deployment (CI/CD) pipelines to enhance development and testing workflows.

2.Secure Testing Solutions

• Deploy and manage Hive Agile Testing Solutions (HATS) to support end-to-end automated testing for secure applications.
• Configure testing environments for load testing, performance testing, and vulnerability assessments.
• Ensure seamless integration between SHIP and HATS for secure, agile development processes.

3.Security & Compliance

• Implement and enforce security controls in alignment with government standards such as FedRAMP, FISMA, and NIST 800-53.
• Manage Identity and Access Management (IAM) policies and role-based access controls (RBAC) for secure resource access.
• Conduct regular security audits, vulnerability scans, and compliance checks on SHIP and HATS deployments.

4.Performance Optimization

• Monitor and optimize the performance of the SHIP pipeline and HATS testing environments to ensure high availability and scalability.
• Identify and resolve bottlenecks in the pipeline to maintain efficient workflows.
• Ensure robust logging, monitoring, and alerting solutions are in place for proactive issue management.

5.Collaboration & Reporting

• Collaborate with cross-functional teams, including development, testing, security, and infrastructure teams, to ensure smooth deployment and integration.
• Create and maintain detailed documentation, including architecture diagrams, deployment guides, and system configurations.
• Provide regular updates to government stakeholders on project progress, performance metrics, and compliance status.

Preferred Skills:

• Prior experience working in a government (GCC and GCC+) environment.
• Familiarity with DevSecOps practices and security automation.
• Infrastructure-as-Code (IaC) and automation tools like Terraform, CloudFormation, and Ansible.