• Evaluate design package and prepare shop drawing of RC structural works and temporary works.
• Liaise structural design works with design-relevant counter parties and construction team.
• Design of temporary works related to structural design.
• Lead the project department in solving design related matters.
• Manage production, quality, design & engineering and schedule issue.

Requirements:

• Degree in Civil Engineering or equivalent
• At least 5 years of civil & structural works experience in Infrastructure/LTA Projects.
• Proficient in STADD, AutoCAD, MicroStation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Carry out inspections of all roads and road-related facilities.
• Report defects picked up during inspections.
• Report immediately to the Supervisor and the Project Manager any incidents or defects posing immediate concern, safety or inconvenience to the public.
• Submit daily reports on the condition of the roads, footpaths & walkways, service roads & footways, and road-related facilities to the Authority.
• Minimum 3 years experience in civil/ structural engineering works or other engineering equivalent.
• Able to recognize and identify defects on the roads, footpaths & walkways, service roads & footways, and road-related facilities.
• Good knowledge of repair methods for defects identified on roads and road related facilities.
• Minimum qualification --- Degree in Civil

Interested candidates, please forward directly the detailed resume in to [email protected]

Please include following information in the resume

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary in Singapore Dollar

3) Expected salary in Singapore Dollar

4) Personal References

Process Engineer (Pick and Place) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line in Pick and Place Process.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects.
• Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
  • New material, process & machine development and qualification.
  • Handle and manage customer audits and 8D reports.
  • Provide disposition for engineering and production lots.
  • Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum Degree in Electrical & Electronics, Microelectronics, Mechanical engineering or relevant engineering discipline
• Experience in Semiconductor manufacturing industry & working in cleanroom environment
• Minimum 3 years hands-on process experience in area of in the Wafer-level Fanout packaging production line or LCD/FPD production line in Pick and Place Process.
• Experience in SPC, DOE, FEMA, and 8D reports

What we are looking for:

- Looking for Network engineer with networking knowledge for routing, switching, firewalls and Data center operation.

- Bonus if the engineer has LB, Proxy and strong troubleshooting skills with endpoint knowledge.

- Work Hours: Mon - Fri 9AM - 6:30PM

Key Responsibilities

Provide onsite engineer for:

- Respond to network appliances connectivity issues and resolve any issues within the confines of the office.

- Collaborate with partners and service vendors to ensure that the proxy, firewalls, and network appliances stay operational.

- Responsible for configuration and maintaining Routers, Switches, Firewalls, Proxy/Web Isolation, Load-Balancer and Security Patches for equipment.

- Troubleshoot, provide resolution and raising tickets when networking equipment face issues.

- Create, maintain, and update documentation as it relates to configuration, process, and service records.

- Monitoring security measures for the protection of computer systems, networks, and information

- Responsible for providing customer support in solving all phases of complex information security related technical problems.

- Reviews and recommends information security solutions to customer problems based on an understanding of

products/systems test results.

Key Requirements

- L2: 3 to 5 years’ experience in Network Infra Setup and Operations and at least 3 to 5 full delivery cycle implementations of relevant projects

- Knowledge of routing, switching, firewall, proxy/web isolation and data center operation.

- Able to work well in a team environment and use tools like Visio and Wireshark.

• Exposure to latest technologies
• On the job training

About the company
Our Client is an established company within their industry. They have a well-established presence of more than 10 years. With rapid expansion plan, they are now looking for an IT Engineer / IT Specialist (System & Networks) to join their team.

About the job
Reporting to the IT Manager, your role involves:

• Providing technical support (Computer, printer, mobile device and etc) to users
• Handling networks (Routers, switches, VoIP)
• Supporting and maintaining the Windows Servers and Office 365
• Managing Active Directory (Print Servers, Backup and etc)
• Handling disaster recovery planning
• Managing external vendors, ensuring SLA is being adhered to

Skills and experience required
As a successful applicant, you will have at least 2 years of experience in IT Support. Exposure to IT networks or system will be of added advantage.

Candidates with proven track record in Office 365 / O365 will be of added advantage.

Whats on offer
This is an excellent opportunity to join an established end user environment with on the job training

To apply online please use the 'apply' function, alternatively you can reach me at https://www.linkedin.com/in/hoonteck-nologyrecruitment. (EA: 94C3609/ R1219669)

Test Engineer

Our reputable client is looking for a System Test Engineer Lead (Selenium) to handle test plan, design, planning and setting up Test Lab. The incumbent is required to lead Installation, checkout, integration and testing (ICIT) at customer’s sites.

Responsibilities:

• Involved in System Test Plan and System Engineering Design.
• Responsible for Planning and Setting up Test Lab and conduct Factory Acceptance Test.
• The ability to perform Troubleshooting and Resolving System Faults and Perform On-Site Acceptance Test.
• Involved in lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

• Strong in performing System Test and Design.
• Strong knowledge in handling Infocomm Technology, RedHat Linux, Virtual Environment, Network Security.
• Experience in handling System Test Plalnning and Troubleshooting.
• Minimum 5 years of System Test experience using Selenium.
• Experience in leading a Team of Engineers.
• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Singaporeans Only.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

• Design, build, and maintain CI/CD pipelines using various CI/CD platforms to streamline cloud deployments.

• Integrate automation solutions across applications to enhance operational efficiency.

• Ensure best practices and security are prioritized when developing CI/CD pipelines.

• Continuously improve operational workflows through task automation.

• Collaborate with subject matter experts to ensure automation solutions meet business requirements.

• Act as an innovative, hands-on DevOps engineer, focusing on both the technological and strategic aspects of the platform.

• Proven experience with Kubernetes and containerization technologies.

• Strong understanding about DevOps and DevSecOps terminology.

• Proficiency in automation tools such as Jenkins, GitLab Runner, AWS Lambda, AWS CodePipeline, and AWS CodeBuild.

• Hands-on experience with Infrastructure as Code (IaC) tools like Terraform and CloudFormation.

• Management configuration tool like Ansible, Puppet.

• Familiarity with scripting languages such as Python, Bash, and PowerShell.

• Experience working in multi-cloud environments, including AWS, Azure and GCP

Job Responsibilities:

• Develop and deploy machine learning models: Design, build, optimize, and deploy machine learning models to address business challenges.
• Collaborate with cross-functional teams to define objectives and integrate models into production systems.
• Model training and evaluation: Train and fine-tune models using advanced algorithms, ensuring optimal performance through techniques like cross-validation and hyperparameter optimization.
• Model deployment and integration: Work with software engineers and DevOps to deploy models, implement APIs, and integrate solutions into existing applications for real-time decision-making.
• Performance monitoring and maintenance: Continuously monitor, refine, and enhance model performance, addressing anomalies and incorporating user feedback.
• Data analysis and insights: Conduct exploratory data analysis, generate insights, and present findings using statistical and visualization techniques.
• Stay up-to-date with the latest advancements: Stay updated with advancements in machine learning and AI, recommending tools and methodologies to improve workflows.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Data Science, Machine Learning, or equivalent experience.
• Minimum 2 years’ experience in a similar role, with hands-on expertise in designing, developing, and deploying machine learning models.
• Strong knowledge of machine learning algorithms, techniques, and libraries (e.g., TensorFlow, PyTorch, scikit-learn).
• Experience with Large Language Models and Generative AI is a plus.

Technical skills:

• Proficiency in Python and machine learning frameworks (e.g., TensorFlow, PyTorch, Scikit-Learn).
• Strong foundation in statistical analysis, probability, and hypothesis testing.
• Familiarity with cloud-based machine learning tools (AWS, Azure, GCP) and distributed computing frameworks (e.g., Spark) is a plus.
• Analytical mindset with the ability to solve complex problems and develop innovative solutions.
• Excellent communication skills for conveying technical concepts to diverse audiences.
• Proven teamwork and multitasking capabilities.
• Adaptable and committed to continuous learning, with a focus on staying updated on advancements in machine learning and AI.
  

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Responsibilities

1. Work with business development, Engineering, system test and external customers to gather information and develop RF Test plans, specifications for product under test.
2. Perform RF testing using test equipment such as spectrum analyzer, noise figure meter, power meter, network analyzers, and signal generators.
3. Assembling/debugging the RF test system and device under test.
4. Hands on troubleshooting and repair of RF product till component level using RF and digital measurement tools & equipment.
5. Analyze test data and provide reports on yield.
6. Document test procedures, results, and any issues encountered during testing and debugging.
7. Assist in the development of new RF testing methodologies and best practices.
8. Do simple antenna parametric radiation measurement

Requirements

· Diploma /Bachelor in Electronics or Communication Engineering, or equivalence

· Preferably with at least 2 years of working experience in a product-based electronics manufacturing environment / product development.

Skills, Experiences & Knowledge

· Experience in automating test and measurements using bench test equipment.

· Knowledge of programming software in C, C#, Python or LabView.

· Experience with PCB design software

· Experience in antenna parameter measurement

· Preferably with soldering experience

· Excellent communication and documentation skills.

Kindly forward your resume in Word format to apply(at)tekvillage.com

EA Licence No: 18C9120

EA Personnel: R1764354

Note: Only shortlisted candidates will be notified.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Overview:

This is an opportunity to directly work in a health services sector as an Application Support Engineer (System Analyst).

Responsibilities:

• Provide level 2 application support, liaise with level 1 and level 3 support teams within the company and other organizations to resolve incidents and recover service.
• Provide 24/7 primary application maintenance and support.
• Work with level 3 support teams to fulfill service requests and change requests.
• Document and track incidents, service requests, change requests and provide regular progress updates.
• Coordinate closely with support teams to test and deploy defect fixes, enhancements and patches to production environment.
• Lead and coordinate regular system maintenance and upgrade activities such as monthly maintenance, patching and hotfix deployments.
• Review and update project documentation and processes.
• Work with procurement team and vendors to procure necessary software and services.

Requirements:

• Must have Degree in Computer Science, Computer Engineering or equivalent.
• At least 1 year experience in application support and operations.
• Good understanding of IT technologies, methodologies and processes including SDLC and Agile.
• Experience in application support and maintenance for mobile applications and web portals.
• Good track record in managing business users and working with other support teams.
• Strong analytical skills and ability to work independently.
• Experience in healthcare industry is an added advantage.

Morgan McKinley Pte Ltd

Cedric Ferreras

EA Licence No: 11C5502

EA Registration No. R1870889

Responsibilities:

· Execute field service activities per Company procedures and general practices of safety and cost-effectiveness.

· Perform basic troubleshooting, running tests, fine-tuning, adjustments, and trimming related to running performance on equipment.

· Independently perform significant/complex repairs and complete overhauls.

· Perform warranty and commissioning activities, delivering the equipment to the customer or a shipyard.

· Perform internal and external progress status reports of assigned work.

· Participate in briefings and debriefing for each service mission

· Create Service Work Reports.

· Collect and organize time sheets and expense reports. Report and inform the back office as required.

· Ensure the work is executed according to Company Quality, Health, Safety, and Environmental guidelines and customer site procedures.

· Issue WeCare and Non-Conformance Reports when appropriate to ensure "lesson learned" from experiences gained at service missions

· Execute Client Survey after each job

· Supervise the tasks performed by Company employees and subcontractors.

· Advice and promote company products and solutions to customers.

· Participate in other department work as directed by the Line manager.

Requirements:

· Bachelor degree in Process, Automation, Mechanical, Marine, Electronics, or Mechatronic Engineering

· 3-5 years hands-on experience in process and electrical & Automation disciplines

· Knowledge or Experience in LPG/LNG/VOC/IG, Flare Gas systems, and Renewable & General Gas handling would be considered as advantage

Responsibilities and Tasks
• Provide engineering study is to include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, as well as code compliance.
• Maintain engineering data bases in support of capacity tracking, capital equipment facilitation, and cash flow project management for assigned systems/areas.
• Provide support for start-up of new equipment and ensure that all equipment will properly interface to other mechanical and electrical systems.
• Specify critical components for design projects and is responsible for assuring designs meet all applicable codes and regulations. The applicable code review and analysis utilizing (but not limited to): IFC, IBC, NEC, NFPA, FM, CGA and Semi standards. This requires continual review and analysis of new and existing equipment, applications, and technology.
• Perform engineering study on emerging facilities technologies to support cutting edge semiconductor processes.
• Participate in mid to long term infrastructure planning for facilities in support of the overall company plan.
• Work with in-house TGCM contractor and ensure chemical and Gas Delivery system running smoothly.
• Review and improve Operation and Maintenance SOP and RA.
• Respond to system issues. Perform Trouble Shooting with in-house TGCM contactors and OEMs.
• Verify all works done by Chemical and Gas section are in accordance with company safety guidelines;
ensure safety features are engineered into designs; and maintain good communication with other engineering disciplines and customers throughout the organization.
• All team members are required to complete their learning items within the stipulated time frame.

For business process and/or QMS component that one is responsible or accountable for:
a. ensuring the QMS/business process that is effective and conforms to requirements.
b. ensuring that the processes are delivering their intended outputs.
c. reporting on QMS/business process performance and opportunities for improvement to management.
d. ensuring the promotion of internal and external customer focus throughout the organization.
e. ensuring the maintenance of the integrity of the QMS/ business process when changes are planned and implemented.
f. ensuring customer requirements are met.

• Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws
and regulations.
• Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings.
• Prepares bid sheets and contracts for construction and facilities acquisition.
• Reviews and estimates design costs including equipment, installation, labor, materials,preparation and other related costs.
• Inspects construction and installation progress for conformance to established drawings, specifications, and schedules.
• Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Education

• Bachelor’s degree in Chemical Engineering or equivalent discipline.

Skills, Knowledge and Abilities

• Good team work and collaboration

• Excellent communication and presentation skills

• Strong problem solving and analytical skills

• Independent and able to work on own initiative

• Good organizational skills and ability to prioritize and schedule workload

• Good knowledge of Microsoft Office

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Our client provides advanced instruments and systems designed for high performance across various industries.

• Connect with prospective clients to provide tailored semiconductor solutions.
• Manage the entire sales process, from prospecting to after-sales support.
• Liaise with global teams and R&D to tailor solutions to customer needs.
• Drive growth by exploring industry trends and opportunities in the SEA market.
  Foster and sustain strong client partnerships.

Requirements:

• Degree in Materials Science or equivalent.
• At least 2 years of sales experience in the Metrology/Scientific Industry.
• Good understanding of semiconductor processes for laboratory equipment uses for failure analysis, quality control and metrology equipment for thin film.
• Excellent communication, negotiation, and customer relationship skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

Duties and Responsibilities

• Develop web application prototypes, new technologies and products.
• Build highly responsive and scalable web applications.
• Build fully functional web applications with interfaces to backend database, writing clean and maintainable code.
• Build fully functional, clear, testable backend RESTful/SOAP APIs with interfaces to backend database.
• Resolve defects, and generally ensure accuracy, integrity, interoperability and completeness of system.
• Build regularly automated tasks to perform functions specific to the project requirements.
• Build interfaces to exchange data between various third-party systems.
• Resolve defects, and generally ensure accuracy, integrity, inter-operability and completeness of system.
• Troubleshoot and debug to optimize performance.
• Prepare and deliver software related documentation.
• Provide timely updates to the web and backend application.
• Provide support and maintenance of existing software web application projects.
• Respond to users in a timely manner.
• Work with fellow software engineers to coordinate the development effort and ensure overall consistency in the coding and the interfacing between various components and sub-systems in order to achieve a full functioning solution.
• Work with consultants to craft user stories, assess feasibility and build demonstration showcases.
• Work with consultants and senior engineers to develop test scenarios to ensure full functionality of system before user acceptance test.
• Work with customers and partners, both internal and external where there will be collaboration for knowledge transfer.

Essential Skills and Experience

• At least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.
• Fresh graduate, or up to 2 years of relevant working experience
• Tech Stack Requirements: ASP.NET Framework 4.5 or .NET Core, C#, HTML, CSS, Javascript, SQL Server
• Good problem solving, logical reasoning, planning and time management skills
• Effective communication and technical writing skills
• Strong interest in software engineering
• Willingness to learn on the job, and constantly eager to learn new skills on one’s own
• Ability to work well in teams and also independently in a fast-paced environment
• Familiarity with mobile application development (with Xamarin) is a plus.
• Familiarity with backend API development (with .NET technologies) is a plus.
• Domain knowledge in accounting, or procurement, or inventory management, or leasing, or computerized maintenance management, or billing, or resource booking, or Enterprise Resource Planning is a plus

Only shortlisted candidates will be notified

• MNC Company
• Basic $5000 - $6000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8.30am to 5.15pm
• Jurong Island. Company Transport provided
• Registered WSH Officer with MOM and Fire Safety Manager (FSM) with SCDF

Job Responsibilities:

• Interpret applicable Legal, Singapore Standards, Code of Practice & other requirements and implement & provide directions for compliance.
• Develop, maintain and periodically test out emergency response, Organize & conduct CERT audit and other emergency response relevant drills.
• Liaise with local authorities for all EHS issues, Licence renewal and represent the RC/SICA and other relevant meetings.
• Manage all EHS incident and non-conformance investigations and track corrective and preventive actions to closure.
• Organize risk assessments, site inspections and industrial hygiene and environmental samplings as well as implement or direct risk reduction and control measures.
• Conduct and organize EHS audits, trainings, meetings and promotional programs to increase employee awareness and knowledge.
• Establishing EHS objectives & Targets and its management Programme for continual improvement.
• Contractor management on In-house & SDM (Shutdown Maintenance) activities.
• Should have strong awareness on Safety Case implementation as well as Mitigative Measures for Safety Critical Events (SCE) in Major Hazard Industries (MHI).
• Establish good communication with all level and function within the organization.
• Assist in the adhoc assignment or project assign by management.
• Spearhead continual improvement projects for HSE.
• Work with HSE department in organizing Annual Safety Campaign.
• Liaise with local authorities for all EHS issues, License renewal and represent the RC/SICA/SORT and other relevant meetings.
• Other ad-hoc duties as assigned.

Requirements:

• Min Diploma in Chemical Engineering
• At least five years of primary experience handling safety responsibilities within HSE department
• At least 3 years of working experience in the oil or petrochemical industry. Preferably experienced in Jurong Island
• Must be a Registered WSH Officer with MOM and Fire Safety Manager (FSM) with SCDF
• Good command of English (spoken and written)
• Experience with ISO14001/ SS651(ISO45001) management systems

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description:

• To plan, manage, oversee and be responsible for all aspects of the health, safety and environmental matters for the Project.
• To advise and report to Developer and ensure the Project complies with its statutory obligations.
• To be responsible for health, safety and environmental control, update the Safety Management System Manual and to ensure that all works adhere to the procedures and instructions.
• To manage the team of Assistant Safety Managers and ensure all duties and responsibilities required of they are discharged professionally and competently.
• He shall prepare a monthly status update for review with Developer but not restricted to the following
• To keep up to date with changes in current legislation and to bring to the attention of the Project Superintending Officer(s) any relevant new legislation.
• To ensure the notification of the Project Superintending Officer(s) if the corrective action agreed after any workplace inspection is not implemented by the arranged date.
• To vet and endorse the minutes of all safety-related meetings and other meetings as directed by the Developer.
• To ensure the implementation and monitoring of appropriate safety measures in accordance with the Workplace Health and Safety Act.

Requirement:

• At least 5 years of relevant experience in construction industry preferably 3 years with developer/main contractor
• Must be a registered Workplace Safety and Health Officer with MOM and have been practicing as WSHO for at least 3 years
• Has developed a Risk Management Implementation Plan (bizSAFE Level 2) or equivalent
• Good communication skills and team player
• Must be able to clear any internal security checks conducted by the Singapore Government

Roles & Responsibilities

Responsible for carrying out daily pest control activities according to operational schedule

Monitors and responds to customers’ feedback

Provides oral and written feedback on work activities

Uses equipment, chemicals, and pesticide/insecticide products

Performs any other related duties as instructed by the immediate superior.

Requirements

Must possess an NEA Vector Control License & Singapore Class 3 driving license

Physical fit to carry out the works.

Candidates with no experience are welcome to apply

• Overseeing all aspects of a construction project, including managing and monitoring daily operations
• Managing teams, coordinating work schedules, overseeing procurement, and maintaining compliance with regulations and standards
• Supervising multiple projects and maintaining quality control
• Ordering building supplies, scheduling equipment maintenance, and training new construction employee . Managing and instructing site workers, setting their schedules, and monitoring their performance

• Gross up to $5,000 + Attractive benefits
• Project type: Industrial
• West

Job responsibilities:

• Review project specifications, technical clarifications and construction drawings.
• Carry out construction works scheduling, material requisition, cost control, project supervision and documentation to ensure compliance with regulations.
• Co-ordinate with the Structural, Architectural and M&E staff to resolve related problems and issues.
• Ensure timely and smooth progress of works.
• To perform QA / QC role in area assigned and to ensure safety regulations are being compiled on site.
• Prepare various reports (progress report, project handover report and etc.).

Requirements:

• Degree in Civil Engineering and PEB recognized degree (IES, BEM)
• Fresh graduates in Civil Engineering are welcome to apply.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R22107887 | Gladys Chang Si Min

• Recognised degree in civil engineering, construction management or related field.
• Minimum 5 years of experience in construction planning and preferably in MRT or large scale infrastructure projects.
• Profeciency in construction progress planning, data analysis and using BIM software such as Primavera P6, AutoCAD, Navisworks, Power BI & etc.
• Strong understanding and knowledge of tunnelling and underground construction and cut and cover technigues.
• Proven ability to analyse critical paths, manage project timelines and adapt plan effectively.
• Monitor project progress and adjust plans as necessary to mitigate risks and meet deadlines.
• Preparation of progress reports by forecasting and identifying delays and bottlenecks.
• Familiarity with ERSS walls, pile extraction, contaminated ground, railway protection requirement, WSM and large diameter bored tunnels.
• Able to work under pressure and manage multiple priorities.
• Applicants are required to submit their detailed CV and indicate the current and expected salary.

Roles & Responsibilities

• Implements appropriate control measurements in accordance with QECP Design
• Ensure compliance with the latest environmental regulations
• Coordinate with the Construction Manager and QECP on the ECM Plan
• Proper documentation of all EHS records, certificates, notices and official related EHS correspondence
• Organize HSE promotion and health campaigns
• Assist Safety Officer in planning and directing the HSE functions
• Any other duty required to be performed by ECO

Requirements

• Must be NEA Registered ECO
• Registered ECO with more than 3 years post-registration and relevant practical experience in Civil Engineering Construction works with LTA Projects
• Good knowledge of Government Regulations relating to Occupational Safety, Health and Environmental
• Preferred to have experience in managing OHSAS 18K, ISO 14K, ISO9K

• Overseeing all aspects of a construction project, including managing and monitoring daily operations
• Managing teams, coordinating work schedules, overseeing procurement, and maintaining compliance with regulations and standards
• Supervising multiple projects and maintaining quality control
• Ordering building supplies, scheduling equipment maintenance, and training new construction employee . Managing and instructing site workers, setting their schedules, and monitoring their performance