DUTIES & RESPONSIBILITIES

General Finance Duties

· Handle full set of accounts (GL, AP, AR), payroll, CPF, HR, GST & tax matters

· Maintenance of proper accounting records & filing system

· Handle petty cash & expenses

· Liaising with Group Finance Executive and auditors & preparing statements for yearly audit

· Preparing quotations for civil work.

· Any other duties as and when assigned

JOB REQUIREMENTS :

· Min. O levels with accounting, or Any diploma, Degree

· Min. 0-2 years’ relevant experience

· Able to work independently

· Strong sense of integrity, responsibility with a positive attitude

· Meticulous and very detailed-oriented

· Proficient in Microsoft Office / Xero

Responsibility

1. To carry out daily checks of the assigned vehicle to ensure safe lifting operations at all time
2. Being able to start on short notice will be a bonus.
3. Lifting of precast products or materials on sites.
4. Monitoring the load weights and stability of the crane.
5. Responsible for basic housekeeping and maintenance of tower crane.
6. Complies with all and ensures compliance of all safety, health, environmental and other company policies, procedures and requirements.
7. Inspecting the machinery before and after use.
8. Any other duties as assigned by the Supervisor/Project Manager as and when needed.

REQUIREMENTS:

1. Complete secondary school or higher education level.
2. Obtain a Class 5 driving licence.
3. Complete a relevant crane operator course.
4. Be able to communicate with your team.

• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site
• Contract period Jan’25 – Jun’25

• Deliver cooking gas to households
• Able to carry LPG gas cylinders for delivery to households
• Driving license class 3
• Lorry driving experience of at least 2 years
• 6 Days work week, 8am to 8.30pm

Assist in preparation and submission of tender quotations and ensure timeline are met for every tender.

Quantity take-off for all the tenders, in the form of manual measurement and update the amendment changes of the tender

During tender stages, sourcing of quotation for rates and technical data are required due to every project’s requirement varies.

Arrange and carry out tender interview, negotiate of price with suppliers and subcontractors including of preparation of sub-contract agreement / letter of award.

Monitoring progress claims and payments, sub-contractors payment, certification, VO submission and final accounts

Assist in the settlement of final accounts with client, suppliers and subcontractors

Job Requirements:

Minimum Diploma in Civil Engineering / Building / Quantity Surveying or equivalent

Minimum 3 years of relevant work experience in construction industry

Proficient in MS Office and other Measurement Software

• Handles demolition projects
• Manage site operations
• Liaise with supervisors and managers
• Training for workers and operators
• Ensure projects run smoothly
• Assist superior, manager in project planning
• To work with the project team on projects
• Coordinate, supervise and liaise site activities when necessary

The WSHE Officer is responsible for carrying out all the environmental, health and safety tasks to create and maintain a safe workplace and culture.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Discharge duties as relevant in the WSH Act, WSH (Workplace Safety and Health (Officers) Regulations and Environmental Public Health Act
• Implement and maintain proper procedures of WSHE management, administrative and recording system
• Assist the WSHE committee chairman, act as secretary to the committee and provide guidance to the members in carrying out their safety duties
• Conduct team/ individual WSHE inspections and produce relevant reports and follow-ups
• Organize / conduct WSHE briefing/ training to all employees
• Investigate every incident/ accident and develop preventive measures
• Ensure risk assessment control measures are implemented for their activities
• Be prepared to stop work or to notify the Site Manager in the event of any WSHE deviations
• 47hrs/Week

Value Add of PositionIn-depth knowledge of WSHE legal guidelines to advise and facilitate site activities.

Qualifications and Education Requirements

Education: Minimum Specialist Diploma in Safety, Health and Environment as stipulated in the Singapore Ministry of Manpower’s accepted WSH-related qualifications
Experience: Minimum 5 years of experience in the Construction industry & Min 3years in LTA MRT Projects.
Registered WSHO with Ministry of Manpower

Employer questions
Your application will include the following questions:

Which of the following statements best describes your right to work in Singapore?
How many years' experience do you have as a Workplace Health, Safety and Environmental Officer?
How many years' experience do you have in the construction industry & LTA Experience ?

Responsibilities :

• Coordinate and management of M&E works
• Review and align M&E design drawings to ensure compliance with specification and guidelines.
• Responsible for on-site technical & engineering matters and quality checks.
• Ensure M&E works are performed on time and in compliance with all necessary standards, code of practice and safety regulation.
• Coordinate with M&E sub-contractors work progress, drawings, materials, samples, method statements submission and approval.
• Coordinate M&E works with Client’s representative, consultants and sub-contractors on technical matters.

Requirements :

• Diploma in Mechanical or Electrical
• M&E Coordinator Certificate
• Minimum 3 years of relevant experience
• Good communication and interpersonal skills

Wanted delivery driver & general worker call personally to 161 Kampong Ampat #03-03 Goldlion Building S(368329) Tel :62845005

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition. Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging it sector expertise and global track record.

For more information, please visit www.sembcorp.com

Responsibilities:

• Develop suitable subcontract conditions for specific project requirements
• Prepare project budgeting and costing reports
• Responsible in cost estimating, quantity take off, claims preparation, variations and final accounts.
• Review of contracts, prepare tender & contract documentations, tender analyses & reporting, measurement etc
• Review sub-contractors claims and materials on site
• Standardize all agreements (e.g. subcontracts and joint ventures) with alignment to contract policy.

Requirements:

• Degree in Building/ Construction Management/ Quantity Surveying or its equivalent.
• Minimum 4 -10 years of relevant experience in construction/ FM industry.
• Strong in arbitration and negotiation skills.
• Good understanding & knowledge of contracts law and its application.
• Preferably well versed in various form of contracts such as PSSCOC, SIA and FIDIC as well as other international form of contracts.
• Strong communication and presentation skills.
• Due to the sensitive work nature, only Singaporean applicants will be considered.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

Institution-first Mindset – Put the interest of the Group ahead of individual interests.

Collaboration – Deliver through collaborating across markets, businesses, and functions.

Accountability – Hold team and self-accountable to deliver on our commitments.

• Analyse project/business needs and necessary technical requirements, activities and employees, monitor planning continuously and take corrective measures if necessary.
• Coordinate the different technical activities (conceptual design, built, mobilisation, commission, maintenance and repair) in own focus area.
• Prepare and request budget for technical activities (based on detailed specifications), manage actuals and present views.
• Ensure conceptual, basic and detailed design is executed according to needs defined and in accordance with compliance regulations.
• Write technical specifications to workshops/shipyards, suppliers and service providers for technical asset production, repair and/or maintenance, evaluate proposals and decide on parties, in accordance with Technical Specifications and in agreement with Technical Manager, draft contract/PO and ensure execution/delivery according to these agreements.
• Have relevant expertise in the technical field, keep up with relevant developments in the own area and related areas of expertise and contribute to the (technical) field by developing new, state of the art knowledge and exchanging knowledge with colleagues
• Relevant tertiary qualifications/Degree/Diploma/Master in Science or Engineering (or equivalent knowledge and experience)
• With minimum 7 years of relevant work experience
• Meticulous, organised and attentive to details in the midst of a fast-paced environment
• Analytical and problem-solving skills
• Excellent verbal and written communication skills in English
• Proficiency in MS Excel and IT skills

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition. Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging it sector expertise and global track record.

For more information, please visit www.sembcorp.com.

Purpose and Scope

Responsible for project planning to ensure smooth execution and completion of works

Key Roles and Responsibilities

• Site supervision of works
• Coordination of civil structural, architectural, mechanical and electrical, , external works, including temporary works with Client, Consultant, Subcontractors & Vendors
• Review all design, construction and shopdrawings
• Prepare minutes of meeting, submit RFIs, material & shopdrawing submissions, Progress Report, Work Schedules, daily reports, etc
• Ensure works are carried-out safely on site
• Prepare and check works according to Company's 3-in-1 management system procedures

Qualification, Skills and Experience

• Degree in Civil Engineering or its equivalent
• Experienced in the construction industry
• With Construction Safety Course for Project Managers
• Proficient in Word, Excel, PowerPoint, Basic AutoCad
• Due to the sensitive work nature, only Singaporean applicants will be considered.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

Institution-first Mindset – Put the interest of the Group ahead of individual interests.

Collaboration – Deliver through collaborating across markets, businesses and functions.

Accountability – Hold team and self accountable to deliver on our commitments.

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition. Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging it sector expertise and global track record.

For more information, please visit www.sembcorp.com.

Purpose and Scope

Responsible for M&E works such as ACMV, Electrical, Plumbing and Sanitary etc

Responsibilities:

• Review project specifications and technical clarifications
• Responsible for M&E works such as ACMV, Electrical, Plumbing and Sanitary etc
• Coordinate with Engineers and Architects, and perform site supervision and co-ordination of M&E works
• Review all M&E shop drawings from design team and submit to consultant

Requirements:

• NTC/Nitec/Diploma in Electrical Engineering or its equivalent
• Minimum 3 years’ relevant experience in construction industry
• Possess M&E Coordination Certificate or CoreTrade Supervisor for M&E
• Experienced in Electrical/Mechanical Construction Works
• Candidate must be able to hands-on whenever project requires.
• Due to the sensitive work nature, only Singaporean applicants will be considered.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

Institution-first Mindset – Put the interest of the Group ahead of individual interests.

Collaboration – Deliver through collaborating across markets, businesses, and functions.

Accountability – Hold team and self-accountable to deliver on our commitments.

Job Description:

Conduct daily check to ensure that vehicle are in good and safe condition

Delivery goods or workers to designated locations

To lead a team of workers to perform installation on a safety & timely manner

To perform cabling, termination and jointing works for OSP/In-Building structure

Other ad-hoc duties assigned

Job Requirements :

Good working attitude and committed to work

Physically fit, hardworking and responsible

Experience in Telecommunication Network an advantage

Familiar with Singapore Road

Class 3 driver with forklift

Operate and promote safe working on site, assign dayly work on construction site. Scheduling, co-ordinaating and supervising the work of all site operatives, ensuring that all work is delivered safely on time and within budget along with managing equipment and materials required. Order and manage hired . internal equipment on a dayly basis, co-ordinate delivery / pick up of material as required.

Job Description:

• To assist the Project Manager in the daily execution of work including manpower deployment, materials on-site and work schedules.
• Liaise with consultants, sub-contractors on day-to-day operations and technical issues
• Responsible for all trades of works on-site, including structural, architectural, building, M&E etc
• Ensure good quality of work and manage defect rectifications.
• Ensure work is done in compliance with design, specifications, safety requirements and related local statutory regulations.
• Check and supervise direct labor/workers including their attendance.
• To monitor materials on-site in order to ensure that the appropriate material is available to meet the construction program.
• Assist in the organizing and sequencing of work.
• Delegate the works and control the projects within the budget and schedule.

Job Requirements:

• Possess a National Certificate in Construction Supervision (NCCS) and at least 5 years of similar capacity relevant working experience in Construction.
• Able to read drawings will be an added advantage.
• Possess good communication and interpersonal skills

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues.
• Production and maintaining of drawings from BIM (Revit) model and ensure proper transmission of data to all parties involved.
• Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Transform AutoCAD drawings into 3D drawings.
• Ensure BIM standards and Level of Development (LOD) are followed.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

• Track changes to the Design/ Construction work and adjust budget projections accordingly
• Price/ forecast the cost of different materials required for the project
• Procurement responsibilities including preparing tender document or calling for quotation for subcontract packages including evaluation through cost comparison as well as recommendation of awards
• Certificate and evaluate progress work done; includes contract administration for any variation or change for both Subcontracts and Main Contracts
• Prepare and followup monthly progress claims in timely manner
• Perform other QS-related duties as assigned by the Reporting Supervisor

Requirements

• Possess Diploma or Degree in Quantity Surveying or its equivalent

Senior Quantity Surveyor, Tender & Contract

(Civil Projects)

Primary Objective

Ability to sources for all the cost estimated for the construction projects and prepares quotations and tenders for projects.

Providing support in the procurement administration of the project and manage project budgeting, controlling of cash flow and cost, processing of claims, contract payment and settlement of final accounts as well as maintaining proper documentation.

Manages a small team of junior Quantity Surveyors.

Equipped with professionalism, to provide support to the project team, maintaining commercial information and ensuring compliance with contractual requirements and ensure that the Company’s objectives are achieved. Liaise with customer representatives and other third parties on commercial issues including agreement of variations, claims and any additional payments.

Key Activities

· Monitor the progress claims and issuance of payment response. Manage project budget with various stake holders to ensure efficient and timely assignment and submissions.

· Assess the degree of hazards and risks to ensure workplace safety is maintained.

· Communicate with the management, contractors and sub-contractors on the adjustments to cost estimates to facilitate smooth transition of information.

· Conduct the negotiations during the course of the project in order to ensure issues are resolved.

· Control project scope to meet project objectives to enhance project deliverables and key work activities.

· Monitor project costs to ensure the objectives of the project are achieved in accordance to building contract law.

· Oversee and ensure compliance with standards.

· Prepare cost analysis and form cost reduction strategies to ensure the overall value is enhanced for the project.

· Prepare tender and contract documents in accordance to the building and construction regulations.

· Provide advice on contractual claims so that the project scope is managed.

· Assist the team on quantity take offs, estimation, prepare tender submission, cost planning, sourcing sub-contractors, forecast budgeting, variation orders, final accounts

· Preparation of list of prequalified bidders for comparison, cost analysis, negotiations and awarding of sub-contractors· Preparation of tender submissions, when required

· Preparation and Issuance of Contracts to Sub-Contractors and Suppliers

· Preparation of Monthly Progress Claim to Client and Sub-Contractors/Suppliers

· Preparation for Payment Response to sub- contractor and suppliers

· Monitoring and follow-up on the payment response from client until receipt and submission of invoice to client

· Monitoring and submission of monthly Cash Flow and analysis

· Manage team of Junior Quantity Surveyors

· Actively seek to improve processes and procedures. Have a good understanding of the processes and procedure

Job Requirement

Degree in Construction Management, Quantity Surveying, or related qualifications with experiences in the construction industry.

Minimum 5 years of experiences in civil engineering projects.

Demonstrate a good knowledge of monthly reporting and earned value analysis

Excellent team player whilst also holding the ability to work independently on own initiative

Excellent time management skills, with ability to work to tight deadlines.

Strong follow up & analytics skills

Ability to encourage and support junior members

Assist the HR manager to oversee HR Department & manage the full spectrum of HR Functions and adminstration.

• Provide HR support to the Manager on recruitment, performance review, employee relations, compensation & benefits.
• Conduct orientation to new employees.
• General HR administrations, such as preparation of appointment letters, confirmation letters, memo and etc.
• Coordinate with Operations Department to evaluate on the next course of action after being notified of any disciplinary case.
• Conduct exit interview. (For foreign resignees)
• Liaise with relevant ministries and agencies to process Work Permit, S Pass, Employment Pass for Malaysians (TS), Non-Traditional Sources (NTS), People Republic of China (PRC).
• Implementation of HR policies and recommend appropriate practices to ensure consistency and long term substainability of HR policies.
• Carry out any other duties as and when assigned by immediate supervisor or higher management.
• Involved in recruiting process, in connecting workers, negotiations, explainations of contracts.
• To apply, renewal work permits, arranging medical checkups, purchase of security bonds, air tickets for repartiation and home leave employees.
• To apply and ensure MWOC is secured for employees.
• Monitor employee progress and stay abreast on company climate and culture, ensuring it stays positive and productive.
• Demostrate leadership abilities.
• To assist other departments managers when necessary to gain exposure in other areas.
• Undertake any ad-hoc projects assisgned by superior/management team from time to time
• To arrange for Medical/WICA insurance yearly renewal and process any claims pertaining to workers medical/wica case.

Considering the expansion of projects and their transition to the live stage, we are actively seeking additional suitable candidates.

Job Description:

• In charge of quantity take-off, costing & estimation of Civil Engineering projects
• Involved in tender preparation and participation
• Post award contract administration and cost control
• Preparation of technical details for tender submission
• Overall responsible for putting up payment claims, prepare and verify payment to sub-contractors, ensure all variations to contract are captured, track VOs, seek and compare quotations from sub-contractors, control project cost and general contract administration
• Perform other ad-hoc duties that may be assigned from time to time

Job Requirements:

• Minimum 2 years related QS experience
• Proficiency in MS office and AutoCAD
• Must be meticulous, detailed and conscientious with a positive work attitude
• Able to meet tight scheduled deadlines
• Independent and a good team play

We are seeking a skilled Project Engineer with a background in civil engineering, specifically experienced in Road Infrastructure Works, to oversee and manage various phases of road construction projects, ensuring adherence to specifications, timelines, and quality standards.

Key Responsibilities:

• Develop project plans, including timelines, resource requirements, and budgets.
• Coordinate with stakeholders to ensure project objectives are clearly defined and met.
• Monitor project progress and performance, identifying risks and implementing mitigation strategies.
• Review and interpret engineering designs, drawings, and specifications.
• Ensure compliance with regulatory standards, codes, and safety guidelines.
• Conduct site inspections and quality control checks to verify work meets project requirements.
• Foster a collaborative work environment, promoting communication and problem-solving.
• Prepare progress reports, technical documentation, and project updates.
• Maintain accurate records of project activities, expenditures, and resources.
• Communicate project status, milestones, and issues to clients and stakeholders.
• Address client concerns and inquiries promptly, ensuring high levels of satisfaction.

Requirements:

• Degree in Civil/Structural Engineering recognised by the Professional Engineer Board, Singapore, or qualification acceptable to the Commissioner of Building Control Proven experience in managing road infrastructure projects, ideally within LTA or similar agencies.
• Strong understanding of civil engineering principles, construction methodologies, and project management techniques.
• Effective communication skills, both verbal and written, with the ability to liaise confidently with clients and stakeholders.
• Prefer experience with large-scale infrastructure projects involving roads, highways, or transportation

The remuneration package shall be commensurate with relevant project experiences, proven track records and professional skills.

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard.
• Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels and establish a proper restore/repair plan. Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations.
• Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality, environment, health & safety requirements are met.

Requirements:

• Minimum 8 years of engineering experience with a degree in Electronic and Control Systems Engineering or a recognised degree in the relevant field subject to the acceptance of the engineer.
• Experience in planning Electrical systems.
• Experience in designing (Initial/Basic/Detailed) the Electrical part of vessels.
• Experience in development of process simulation for LNG Dual-Fuel vessel's Fuel Gas Supply System (FGSS)
• Good knowledge of ships in Electrical (both power and instrument) system and equipment, Machinery system and equipment, Alternative fuel (LNG, Methanol, etc.) systems, equipment and deep insight into trends in the maritime industry
• Well-versed in ship designing and maintenance requirements.
• Good written and interpersonal skills
• Positive working attitude and ability to work in a fast-paced environment.