Job Description:

· Able to install and repair electrical wiring, systems & fixtures in buildings.

· Assist the operations teams with electrical troubleshooting and repairs

· To perform corrective / preventative maintenance on equipment

· Having experience installing and repairing plumbing fixtures

· Ensure that the work area is safe and clean

• To develop and submit a Project Interface Plan (PIP) which manages the interface management process throughout the project life cycle.
• To be responsible for the project wide internal and external interface management activities.
• To conduct weekly interface meeting with all stakeholders and interface manager of all contractors (including SC, direct contractors / specialists to be appointed)
• To manage and coordinate with interface manager of all systems to incorporate the finalised interface details into the overall combined services plans /BIM
• To work with BIM coordinator and be responsible for the BIM coordination for development of BIM Model.

Job Requirement

Shall possess an Engineering Degree with at least 10 years of relevant working experience in M&E services coordination OR

A diploma with at least 20 years of relevant working experience in M&E services coordination.

Job Description

• Prepare a lifting plans normal and critical lift plans
• Coordinate and Supervisor overall site lifting activities
• Conduct coordination and logistic meeting with subcontractors
• Visual Inspection of Cranes and lifting equipment’s
• Help site team in planning proper lifting equipment for required lifting works

Requirements

• 5 Years and more as Lifting supervisor/coordinator at construction site
• Lifting appointed person certified will be preferred
• Familiar with rigging techniques of construction material

Job Description

• Carry out daily site supervision, coordination and quality assurance of all architectural/Structural/M&E trades on site ;
• Work closely with subcontractors on their works to ensure timely work progress ;
• Ensure all works are carried out in accordance to approved specifications ;
• Other ad-hoc duties as assigned by the management

Requirements

• Knowledge in Architectural/Structural/M&E works ;
• Diploma or Relevant Trade Certificate ;
• Minimum 5 years of supervisory experience in architectural/Structural/M&E works ;
• Able to work independently and in a team

Job Description:

· Advise management on EHS legal and other requirements,, including their changes.

· Ensure provision in legal requirement such as WSH Act and WSH (Construction) Regulations are complied with.

· Review company’s safety performance and formulate measures to achieve continuous improvement.

· Review company safety resources and provide recommendations to management to meet EHS requirement.

· To arrange with senior management and laisse with projects to conduct monthly safety site walk.

· Fulfill any additional responsibilities assigned by the Project/Site Manager.

Requirements:

· Accredited WSHO and ECO with a minimum of 5 years of experience in the relevant field.

· Possess a Diploma in Engineering or Environmental Health and Safety.

· Demonstrated proficiency in organizational, interpersonal, and leadership skills.

· Capable of leading WSHOs, offering supervision, guidance, and instructions to all safety personnel.

· Sound understanding of government regulations pertaining to Occupational Safety, Health, and Environmental domains.

· Well-versed in OSH/ISO documentation.

Job Description:

• Lead and manage the planning, execution and completion of diaphragm wall construction projects.
• Oversee the design, development and approval of construction plans and technical specifications.
• Coordinate with consultants, subcontractors and suppliers to ensure smooth project execution.
• Ensure compliance with safety, health, environmental and legal regulations on-site.
• Monitor project progress, manage risks and make necessary adjustments to meet timelines.
• Manage project budget, including cost control, procurement and resource allocation.
• Prepare regular reports on project status, including schedule, financial performance and risk management.
• Resolve any project-related issues, conflicts and technical challenges.
• Communicate effectively with stakeholders to provide updates, address concerns and ensure satisfaction.
• Ensure the proper documentation and filing of all project-related activities and approvals.

Job Requirements:

• Minimum Bachelor’s degree in Civil Engineering, Construction Management or a related field
• Minimum 8 years of experience in construction project management, specifically diaphragm wall construction
• Proven track record managing large-scale civil or infrastructure projects
• Familiarity with local building regulations, environmental and safety standards will be advantageous
• Strong Knowledge of diaphragm wall construction techniques and equipment
• Proficient in project management software
• Knowledge of budgeting, cost control and financial management of projects
• Effective communication, stakeholder, negotiation and conflict resolution skills

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Responsibilities:

• Maintain Troubleshoot, repair, services & maintain.
• Perform on-site and in-house Conyrol and services / repair.
• Complying with service standards, work instructions and customers' requirements.
• Servicing works (maintenance service, chemical treatment, overhaul treatment and etc.)
• Carry out preventive and breakdown maintenance.
• Trouble shoot and resolve technical issues.
• Testing and commissioning of the equipment.
• Report all problems identified during preventive maintenance and carry out repair works.
• Ensure drain pipe is free of dust/dirt and draining properly.
• Performing jobs promptly and efficiently.
• Lead the team of technicians to carry out work efficiently.
• Send workers from Place of Stay to various work sites and vice versa.
• Purchase, collection and delivery of materials/goods from supplier or vendor to sites.
• Perform loading and unloading of goods/materials.
• Ensure timely delivery of goods/materials to sites.
• Perform basic maintenance / upkeeping of vehicle.
• Any other duties as assigned.

Requirements:

• Preferably at least 4 years of relevant supervisory and hands-on experiences in maintenance, troubleshooting and systems.
• Must be independent and must be able to lead the team of technicians.
• Able to work under pressure and in a fast-paced environment.
• Physical work required and be able to work long hours.
• Class 3 with forlift licence.
• Diploma/Degree education on field.
• All races welcome.

Roles & Responsibilities

Responsibilities

• Able to perform electrical installation work suchas cable laying,modification of electrical circuit &lighting
• Able to carry out all responsibilities of a sitesupervisor
• Able to attend weekly or monthly meetings withthe client
• Able to attend non-schedule or emergency call-up
• To supervise general workers & look afterequipment at the site
• To ensure the smooth progress of site works
• To ensure safety & housekeeping standards aremaintained
• To ensure all work done meets quality
• All issues concern on-site works

Requirements

• Independent worker
• Responsible & trustworthy
• Good communication & interpersonal skills
• Able to work under pressure
• Strong knowledge of health, safety &environmental regulations
• Full-time position available

Job Description & Requirements

· Responsible for M&E works such as ACMV, Electrical, Plumbing and Sanitary

· To supervise and ensure works are in accordance to the contract drawings and specifications.

· Prepare method statement, shop drawings, installation / T&C check sheets, work progress report and other relevant documents for M&E related works with project teams.

· Coordinate with subcontractors and consultants on preparation and submission of shop drawings.

· Coordinate / prepare technical submissions with suppliers / subcontractors.

· Assist the Project Manager on all M&E matters.

· Hold technical discussions with various stakeholders to resolve technical / site issues.

· Liaise and work with relevant authorities / subcontractors / clients on shop drawings / equipment submissions, inspections, testing requirements and commissioning.

Job Requirement

· 08 years relevant experience.

· Degree in Mechanical or Electrical Engineering or equivalent recognised by PE Board

The primary duties and responsibilities of an Accounting Assistant include:

• Processing both accounts payable and receivable transactions
• Managing invoices and tax payments
• Assisting in the preparation of budgets and financial reports
• Tracking and reconciling bank statements
• Organizing financial data into useable information and maintain updated records
• Assist with audits and year-end financial reporting
• Processing payroll and maintaining employee records
• Communicating with vendors, clients, and internal departments to resolve any financial discrepancies
• Performing administrative tasks such as data entry, word processing, and filing
• Ensuring compliance with all internal procedures and regulatory requirements

Duties & Responsibilities

• Good knowledge of contract and QS procedures and pricing.

• Experienced in procurement, budgeting, estimation, contract administration, measurement of quantities & variation orders

• Compile photos, inspection forms and all relevant documents required for VOs attachment.

• Strong interpersonal, communication & negotiation skills

• Prepare tender documents, contracts, budgets, bills of quantities and other documentation

• Any other ad-hoc tasks assigned by Superior.

Requirement

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil), Quantity Survey or equivalent.

• 05 years of relevant working experience (QS)

• Demonstrate proficiency and competency in a project QS function and can work independently.

1. Class 3 Driver to drive 14 ft lorry with valid Singapore Driving License.
2. Know Singapore route very well.
3. To ferry Foreign Worker to different job site.
4. Can help to do some general works and help to buy building materials upon request.
5. Preferably with similar experience for at least 3-5 years in Singapore as driver ferrying workers to jobsite.

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard.
• Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause, and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels and establish a proper restore/repair plan. Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations.
• Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality,environment, health & safety requirements are met.

Requirements:

• Must have a Bachelor of Engineering in Marine Electronics and Mechanical Engineering, Graduated advanced Marine Technology Specialist Course or similar.
• Minimum 3 years of Engineering experience in an offshore wind farm, ROV, Trencher or offshore vessel projects.
• Expert knowledge of Trencher (power cable trenching machine)
• Expert knowledge of Work class ROV
• Expert knowledge of wind farm construction projects.
• Expert knowledge of seabed soil information especially.
• Good knowledge of cable laying equipment installed on cable laying vessels.
• Good knowledge of cable laying work using cable laying vessels.
• Can draw the model with 2D and 3D Auto CAD
• Positive working attitude and ability to work in a fast-paced environment.

Responsibilities:

• Supervise and Control of delivery schedule of conversion working vessels within budget with responsibility for high productivity and performance with the project manager.
• Take precautions to prevent troubles on working vessels in the conversion stage.
• Handle operational issues, repairs, and/or modifications to working vessels.
• Liaise and coordinate with various stakeholders, shipyards, and vendors to modify vessels needed for the offshore wind turbine installation operation.
• Check and ensure that the specifications comply with Japanese relevant laws and regulations.
• Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance.
• Ensure quality, environment, health & safety requirements are met.
• Report the status of the project to the headquarters in Japan.

Requirements:

• Minimum 10 years of experience in mechanical or shipbuilding engineering.
• Minimum 5 years of experience in supervising a work vessel such as TSHD, cutter suction dredger, and/or grab dredger.
• Well-versed in relevant laws and regulations.
• Experience in engineering and planning of a new building project for an offshore wind turbine installation vessel with GustoMSC Jacking system with a preload capacity of over 9000 tons.
• Experience in engineering and planning of a new crane installation project with a lifting capacity of 1600 tons or more.
• Experience in working at civil construction project sites.
• Experience in planning electrical equipment.
• Experience in working at offshore wind turbine installation sites.
• Good knowledge of Electrical circuit diagrams and Programmable Logic Controllers and programming such as PLC ladder, function block etc.
• Well-versed in ship maintenance requirements.

Responsibilities:

• To plan and setting schedules and budgets.
• Keep abreast of progress and provide instructions to ensure work is carried out as planned.
• Able to manage budgets and procure and manage materials and equipment appropriately.
• Formulate plans, check progress and control quality.
• To check Ship design drawings and technical specifications
• Confirm compliance with IMO, classification standards (ClassNK) and inspections (JG) stipulated by the Japanese government and comply with technical standards.
• Safe work planning by setting workplace safety rules and engaging in safety training.
• To prepare progress reports and report it to head office.
• Maintain appropriate technical drawings, specifications, and reports.
• Identifying and resolving problems occurring in the field and proposing improvements to increase efficiency and quality.
• Facilitate coordination with relevant parties (shipyards, classification societies, manufacturers, etc.) to ensure smooth operations.
• Thorough control and rapid response in spare parts stock management, repairs and maintenance.
• Manage work teams, liaise with other departments, and coordinate effectively with clients.
• Communicate and cooperate with shipyard personnel and ship's crew, and able to identify root causes and suggest appropriate countermeasures in resolving problems.

Requirements:

• Degree in Electrical Engineering.
• Minimum 20 years of experience operating and maintaining working vessels in the owner's capacity.
• Experience in working at civil construction sites.
• Experience in shipbuilding such as TSHD or any other type of work vessels.
• Construction using a large floating crane (SWL 3,000t or more).
• Experience in dredging works using TSHDs, Cutter suction dredgers, and or Grab dredgers.
• Experience in reclamation works using TSHDs.
• Experience in planning electrical equipment.
• Good knowledge of Electrical circuit diagrams.
• Good knowledge of Programmable Logic Controllers and programming such as PLC ladder, function block etc.
• Well-versed in ship maintenance requirements.
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root cause with the ship's crew on board.

Responsibilities:

• Confirm compliance with IMO, classification standards (ClassNK) and inspections (JG) stipulated by the Japanese government and comply with technical standards.
• Keep abreast of progress and provide instructions to ensure work is carried out as planned.
• Able to manage budgets and procure and manage materials and equipment appropriately.
• To formulate plans, check progress and control quality accurately.
• Ship design drawings and technical specifications can be checked.
• Safe work planning by setting workplace safety rules and engaging in safety training.
• Able to prepare progress reports and report them to head office.
• Maintain appropriate technical drawings, specifications, and reports.
• Identifying and resolving problems occurring in the field and proposing improvements to increase efficiency and quality.
• Facilitate coordination with relevant parties (shipyards, classification societies, manufacturers, etc.) to ensure smooth operations.
• Thorough control and rapid response in spare parts stock management, repairs and maintenance.
• Manage work teams, liaise with other departments, and coordinate effectively with clients.
• Positive personality, always willing to communicate and cooperate with shipyard personnel and ship's crew, and able to identify root causes and suggest appropriate countermeasures in resolving problems.

Requirements:

• Minimum 15 years of experience operating and maintaining working vessels in the owner's capacity.
• Degree in Mechanical and or Electrical engineering
• Experience in working at civil construction sites.
• Experience in dredging works using TSHDs, Cutter suction dredgers, and or Grab dredgers.
• Practical experience at a shipyard.
• Experience in reclamation works using TSHDs.
• Experience in planning electrical equipment.
• Good knowledge of Electrical circuit diagrams.
• Good knowledge of Programmable Logic Controllers and programming such as PLC ladder, function block etc.
• Good Knowledge of high- and low-voltage electricity.
• Well-versed in ship maintenance requirements.
• Good written and interpersonal skills.
• Positive working attitude and ability to work in a fast-paced environment.
• Excellent writing and high communication skills.

Responsibilities:

Ship building Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard.
• Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations, and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover of the vessel.
• Preparation for cable laying work after delivery
• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels and establish a proper restore/repair plan. Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations. Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules. Ensure quality, environment, health & safety requirements are met.

Requirements:

• Minimum of two (2) large-size work vessel construction experience.
• Minimum of 20 years of experience in operating and maintaining working vessels in the owner's capacity.
• Minimum 25 years of experience with a degree in Mechanical Engineering.
• Must be a licensed Professional Engineer of Machinery or Associate Professional Engineer
• Must be a licensed 1st Grade Engineer of Civil-works Management
• Experience in large size of civil construction projects of Shore Reclamation works site over USD20M.
• Experience in large dredging project sites of over USD 500 M.
• Experience in working at civil construction sites.
• Experience in dredging works using TSHDs, Cutter suction dredgers, and or Grab dredgers.
• Experience in maritime construction work or offshore WTG (Wind turbine generator)
• Experience in method engineering and planning and modification of ships and ship equipment.
• Good knowledge of marine engineering and structural mechanics
• Experience in planning ship equipment and work equipment
• Well-versed in ship operation and maintenance requirements
• Good written and interpersonal skills
• Positive working attitude and ability to work in a fast-paced environment
• Positive troubleshooting/finding root cause with the ship's crew on board

Responsibilities

· Carry out daily site operations and supervise a team of structural workers

· Carry out inspection as well as resolving and monitoring structural & rectification works

· Liaise with sub-contractors and RE/ RTO

· Supervise the construction of works, requisition of materials and ensure that they are carried out in accordance with the latest approved drawings

· Ensuring that the works are carried out to time schedule, safely and in accordance to relevant regulations

· Work planning and scheduling

· Any other assigned duties.

Requirements

· Min 5 years of relevant Structural foreman experience for Civil & Structural projects.

· Exprienced in Structural Works, preferably in precast works.

· Completed whole cycle of project in Singapore

· Strong communication and coordination skills

· Able to work independently and also in a team

. Possess relevant safety certificates

Job Description:

• Must be able to draw autocad shop drawings
• Prepare and analyze cost comparison
• Analyze project specifications, quantify materials and resources required, and prepare detailed cost estimates.
• Analyze construction plans and specifications to determine material quantities and costs
• Develop budgets, considering factors such as labor, materials, equipment, and contingencies
• Obtaining quotations, liaising and negotiate with sub-contractors and suppliers
• Responsible for measuring quantities and taking off
• Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments
• Prepare tendering works for submission
• Prepare, negotiate, and manage contracts with clients, suppliers, and subcontractors
• Mitigate risks and resolve disputes during the project.
• All other QS related job

Job Requirements:

• Degree / Diploma in Building or its equivalent
• 2 years as autocad drafter is an advantage
• Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive, a good team player & able to meet tight deadlines
• Having a good communication and negotiation skills with attention to details character
• Having a good project management abilities

Job Responsibilities:

a.Oversee and manage the recruitment process for the company.

b.Handle accounting-related tasks.

Requirements:

c.Relevant work experience in a construction company.

d.Nationality: Open to all.

Compensation and Benefits:

e.Salary: SGD 3,000 per month.

f.Work Schedule: 5.5 days per week.

g.Additional benefits in accordance with Ministry of Manpower regulations.

JOB RESPONSIBILITY

• Find tender opportunities GeBIZE.

• Prepare Tender and submission.

• Familiar with reinstatement and maintenance work.

• Review and analysis of Tenders Drawings & Documentation.

• Preparing Tender submissions and reviewing Procurement & Reviewing of Contracts, and ensuring compliance.

• Reviewing and commercial management of all projects, to ensure accurate and reliable reporting.

• Review all incoming correspondence from Clients, Consultants & Design Team to identify contractually critical items and to initiate replies.

• Estimating a range of projects in a variety of sectors.

• Improve and implement best practice commercial processes and accurate budgeting.

• Maintain accurate records and provide necessary detailed backup to support commercial tracking and costing.

• On Site measurement of Electrical Services.

• Preparation of specialist sub-contract work packages.

• Preparing monthly Commercial Progress reports.

• Other ad-hoc duties assigned by Construction Manager.

Responsibilities:

• To review, conduct incident / accident investigation and provide recommendations for countermeasures and to prevent recurrence of accident
• To coordinate of daily toolbox meeting and upkeep the records
• To conduct daily safety inspection and other type of safety inspection as required at work site
• To coordinate the immediate rectification of unsafe conditions and correct any safety malpractices on site
• Monitor and oversee the enforcement of In-house Rule and Regulation and ensure safe work practices on site
• Coordinate and conduct the safety induction course to all site staffs
• Submission of Quarterly EHS performance & 6-monthly review of Risk Assessment
• Ensure and to carry out duties in accordance to WSH Act & Integrated Management System
• Assist WSHO to establish, update, maintain, and implement the Safety and Health Management System
• To assist WSHO for all safety promotional activities, safety audits, safety meetings and execution of safety programmes

Requirements:

• Advanced Certificate in Workplace Safety and Health or equivalent
• Minimum 2 years of relevant working experience

A Senior Contract Manager plays a crucial role in overseeing contract-related functions, ensuring compliance, and managing risks. A Senior Contract Manager also collaborates with project managers and financial controllers to align contract objectives with project and company goals. This role requires strong analytical, negotiation, and leadership skills to navigate complex construction contracts effectively.

Job Responsibilities

• Draft, review, and negotiate contracts with clients, subcontractors, and suppliers, ensuring alignment with project requirements and company policies.
• Identify and mitigate risks in contract terms, providing guidance on contract clauses, obligations, and liabilities.
• Assess contractual risks and implement mitigation strategies.
• Ensure compliance with legal and regulatory requirements, staying updated on construction and contract law changes.
• Manage the full contract lifecycle, from initiation through project completion and closeout.
• Monitor contract performance, ensuring deliverables meet quality, cost, and timeline expectations.
• Handle variations, claims, and changes, assessing their impact on contracts and project scope.
• Ensure contract budgets align with project financial targets, monitoring expenses, and revenue.
• Approve and process payments to contractors and subcontractors, ensuring accurate billing and invoicing.
• Act as the primary liaison between project teams, clients, subcontractors, and suppliers regarding contract matters.
• Provide clear communication on contract requirements, modifications, and potential issues to relevant stakeholders.
• Address conflicts and disputes that may arise during project execution, coordinating with legal teams as needed.
• Ensure all parties fulfill their contractual obligations, conducting regular audits of contract compliance.
• Supervise and mentor junior contract managers, providing guidance on complex contract issues.
• Lead training sessions on contract management best practices, risk mitigation, and compliance for the team.

Job Requirements

• Bachelor's degree in Construction Management, Quantity Surveying, or equivalent
• Minimum 10 years of experience in a comparable role, specializing in contract management and administration, particularly in the construction industry
• Profound knowledge in Contract Negotiation and Administration
• Relevant experience in both Singapore's public and private sector projects
• Relevant experience in handling subcontracts
• Knowledgeable, experienced, and well-versed in the application of various Conditions of Building Contracts commonly adopted locally

Job Description

· Prepare tender submission, handle progress claims, variation orders and finalize project accounts.

· Administration of tenders - prepare quotation, tender and contract documents including bill of quantities, cost estimation, cost control and budgeting.

· Taking off quantity for tender.

· Assist contract managers with other duties as required from time to time.

· Final account preparations.

· Other ad-hoc duties.

Requirements

· Possess excellent interpersonal skills and communication skills and a leader to influence.

· Efficient, good analytical skills and able to work independently.

· Diploma/Degree in Quantity Surveying or equivalent.

· Possess 2-3 years of working experience in construction field, however marine construction is a plus.

· Proficient in Microsoft Office, MS Project and AutoCad.

· Able to start work immediately.

· Singaporeans/ Singapore PR/ Malaysians or those holding relevant residence status may apply.

A Project Manager in the construction industry is responsible for overseeing and coordinating all aspects of construction projects, ensuring they are completed on time, within budget, and to the required standards.

1. Develop comprehensive project plans, including timelines, milestones, and deliverables.
2. Use project management tools (e.g., Primavera, MS Project) to create schedules and track progress.
3. Define project scope and establish objectives aligned with client requirements.
4. Prepare and manage project budgets, ensuring cost efficiency.
5. Monitor expenditures and address any cost overruns promptly.
6. Negotiate contracts with vendors, suppliers, and subcontractors.
7. Lead and manage project teams, including engineers, architects, contractors, and other stakeholders.
8. Assign roles, responsibilities, and tasks to team members.
9. Foster collaboration and resolve conflicts among team members.
10. Serve as the primary point of contact between clients, contractors, and internal teams.
11. Provide regular project updates, progress reports, and presentations.
12. Address client concerns and adjust project plans as necessary.
13. Ensure all construction activities meet industry standards, building codes, and client specifications.
14. Conduct site inspections to verify work quality and adherence to plans.
15. Implement and enforce quality control measures.
16. Identify potential risks (safety, financial, legal) and develop mitigation plans.
17. Monitor and manage changes to project scope, schedule, and costs.
18. Ensure compliance with safety regulations and protocols on-site.
19. Review and manage contracts, ensuring all terms and conditions are met.
20. Oversee daily on-site operations and resolve any issues.

Qualifications

• A degree in Civil Engineering, Construction Management, or a related field.
• At least 5 Years of working experience in the related field.
• Experience in HDB/MOH project.
• Strong communication and negotiation skills.
• Expertise in project management tools and methodologies.
• In-depth knowledge of construction processes, materials, and regulations.
• Problem-solving and decision-making abilities.
• Leadership and team management.