• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Position Overview: We are looking for a dedicated and knowledgeable Application Engineer to join our team. In this role, you will focus on providing comprehensive training and technical application support to our clients utilizing our construction finishing robots including painting and skimming robots. Your expertise will ensure clients can maximize the benefits and efficiency of our robotic systems.

Comprehensive local and overseas training will be provided for selected candidate, culminating in a certification upon successful completion.

Key Responsibilities:

• Deliver hands-on training sessions for clients and operators on the effective use and maintenance of our painting robots.
• Provide ongoing technical support and troubleshooting assistance to clients to resolve operational issues with the painting robots.
• Collaborate with the engineering and robot development teams to provide feedback gathered from training sessions and client interactions.
• Conduct site visits to evaluate robot performance and provide tailored recommendations for optimal usage in specific construction environments.
• Assist in the setup and configuration of finishing robots for various projects, ensuring adherence to project specifications.
• Stay informed about the latest developments in robotic technology and painting processes to continuously improve training content and support services.
• Facilitate workshops and seminars to educate potential clients about the benefits and functionalities of robotic painting solutions.

Qualifications:

• Diploma/Nitec in Mechanical Engineering, Electrical Engineering, Robotics, or a related field.
• Fresh Graduate will be considered
• Experience in application engineering or technical support, preferably in robotics or automation will be an advantage
• Good basic understanding of robotic systems and their applications
• Good communication skills with the ability to explain technical concepts to diverse audiences.
• Problem-solving skills and a customer-focused approach to support.
• Willingness to travel to client job sites for training and support as needed.

• Recognised degree in civil engineering, construction management or related field.
• Minimum 5 years of experience in construction planning and preferably in MRT or large scale infrastructure projects.
• Profeciency in construction progress planning, data analysis and using BIM software such as Primavera P6, AutoCAD, Navisworks, Power BI & etc.
• Strong understanding and knowledge of tunnelling and underground construction and cut and cover technigues.
• Proven ability to analyse critical paths, manage project timelines and adapt plan effectively.
• Monitor project progress and adjust plans as necessary to mitigate risks and meet deadlines.
• Preparation of progress reports by forecasting and identifying delays and bottlenecks.
• Familiarity with ERSS walls, pile extraction, contaminated ground, railway protection requirement, WSM and large diameter bored tunnels.
• Able to work under pressure and manage multiple priorities.
• Applicants are required to submit their detailed CV and indicate the current and expected salary.

• Develop the project business locally and identify and directly target architects and developers for projects
• Attend to sales enquiries and prepare quotations.
• Support local dealer with pricing, catalogues and project specification support
• Achieve annual sales targets and assist in tender for projects
• Assist with market research or other local activities related to market and business development and sales growth
• Promote brand awareness, identify prospective clients, and expand the client base for the company with focus on the construction sector
• Take ownership and lead business development efforts in selected market segments
• To execute plans and strategies set by Director and the company

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• Assist the Project Manager in overseeing the construction activities and progress, planning, implementation, and monitoring of work schedules.
• Liaise with both internal and external parties and ensure efficient communication.
• Ensuring that the works are carried out to schedule and in accordance with relevant regulations
• Other ad-hoc duties as assigned

Job Responsibilities

• Carry out all maintenance work to ensure the smooth operation and effective management of the estate
• Conduct daily inspections and ensure defects are promptly reported and follow up with the necessary repairs
• Ensure that all assigned maintenance functions are carried out according to contractual requirement.
• Ensure compliance with divisional policies & ISO Procedures.

Job Requirements

• NITEC in Electrical/Mechanical/Building Services or equivalent
• Minimum 2 years of relevant work experience in builing or maintenance services

General Summary of Responsibilities

• Handles the administrative functions in the day-to-day operations of the assigned condominium/building.
• Provide customer service to the owners/tenants in the estate/building.
• Ensure proper administration of facilities bookings
• Collection of management and sinking funds
• Ensure compliance with the by-laws of the estate/building.
• Ensure compliance with PFS policies and ISO procedures

Requirements

• Possess N/O level or Certificate in Office Skills
• Minimum 1 year working experience
• Able to commence work on 1st week of January 2025

. Conduct feasibility study to develop basic and detailed engineering designs.

. Manage budget and resources to ensure timely project completion.

. Manage project to ensure compliance with legal and safety requirements.

. Motivate team members and develop their skills.

. Oversee workplace safety to ensure work is performed according to workplace safety procedures.

. Minimum 1 years experience in Building Construction works.

Job Responsibilities:

• Assist in recruitment process such as job posting, short listing and scheduling of suitable candidates for interview.
• Onboarding and Offboarding for Employee.
• Coordinate and administer training & development programs including submitting of claims/training grants to various government agencies.
• Document control representative for ISO.
• Payroll function.
• Work Pass Application, Renewal and Cancellation.
• Handles matters related to general worker such as dormitory arrangement, update residential address via MOM OFWAS system, CSOC, Coretrade, levy waiver, medical checkup for new hire and monthly renewal workers.
• Matters related to MYE application.
• Conduct and complete market surveys from MOM, IRAS, CPF, WDA and various HR related surveys.
• Other ad-hoc duties as assigned by the Management.

Job Requirements :

• Min 3 years of related experience in Construction Industry
• Strong knowledge in local employment laws and practices
• Able to meet deadlines
• Possess good communication and interpersonal skills

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

ECO cum WSH Coordinator

Job Description

i) To work with the PM to comply with environmental, health & safety (EHS) laws laws, advise PM on environmental remediation measures, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards

ii) Work with the PM to draw up, implement and monitor effective environmental management plans, including reviewing them when necessary:

· Prepare & submit to the PM the Site Environmental Control Programme before work commences at the worksite.

· Prepare & submit to the PM the Site Environmental Control Report once every two weeks.

iii) Inspect the construction site to ensure all facilities, equipment and operations do not pose any environmental health hazard;

iv) Inspect the on-site canteen, worker’s quarters, if any, and dining areas to ensure that good hygiene practices are being observed, and the areas are well maintained with good housekeeping.

v) Identify and discuss environmental health irregularities or potential lapses with the PM, and recommend corresponding measures to prevent or rectify such concerns;

vi) Attend to all feedback on any irregularities and inform the PM accordingly;

vii) Assist the authorities to investigate outbreaks of infectious, vector-borne or food-borne diseases at the construction site; and

viii) Organise campaigns, training courses and other activities, where required, to develop and sustain the interest of workers in maintaining good environmental health standards.

ix) Conduct inspection of the ECM at the worksite in accordance to ECM plan

x) Maintain records of all inspections.

xi) Advice the PM & project team members on the implementation of the EHSMS & implement the EHSMS.

xii) Assist the PM identify any unsafe work condition or unsafe work practice which is carried out in the worksite;

xiii) Recommend to the PM to implement such reasonably practicable measures to remedy the unsafe work condition or unsafe work practice;

xiv) Assist the PM implement such reasonably practicable measures referred to in (xiii) or safe work procedures.

xv) Advice the PM & the project team members on the implementation of the EHSMS.

xvi) Implement the EHSMS.

xvii) Stop the work or recommend to the PM / WSHO to stop the work if it is deem not safe for the work to continue.

xviii) Inform the higher level of management (e.g. Project Director) if conflict between EHS issues & operational considerations at the worksite cannot be effectively resolved.

xix) Report to PM

xx) Perform any duties assigned by PM.

Job Requirements

• Registered ECO by NEA
• Diploma in Public Health
• WSQ Advanced Certificate in Workplace Safety and Health
• Min 3 years of experience in the building & construction industry

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description:

• Competent in reading and understanding drawings and perform measurements.
• Competent in preparing Bills of Quantities.
• Competent in understanding tender/contract/document/specifications/terms of contract
• Competent in analysing quotations/prices/rates, build-up rates and perform pricing
• Competent in performing contract administration including but not limiting to valuation of payments and variations claims in accordance to contract requirements
• Competent in performing all tender activities necessary for the procurement of new projects
• Competent in performing any other activities in connection with the businesses of the holding company
• Competent in working independently as well as with a team
• Participate in any activity ancillary to the company's other objectives e.g. charity events
• Competent in completing required obligations within stipulated timings and other constraints

Job Requirements:

• Bachelor's Degree in Quantity Surveying
• Minimum 3 years of working experience, preferably in the construction industry
• Proficient in Microsoft Office Tools

Job Description

a) Report to the Project Manager. Responsible for the EHS systems and implementations.

b) The detailed duties and responsibilities includes but not limited to the following:

• Assist and advise the Project Manager on EHS planning for overall project scope and detailed activities.
• Study and fully understand the requirements of company ISO, EHS and sub-contracts agreements.
• Liaise, handle and keep proper records in dealing with all related authorities in complying with their respective requirements.
• Conduct regular site audits to ensure compliance with EHS requirements. He is authorized to take necessary actions including issuance of partial stop work order as he and the Project Manager deem fit.
• Handle all accident and incident reports.
• Work as a team with project team members and sub-contractors to provide a safe working environment.
• Prevention of fines, imposition of demerit points and SWO from the authorities or owners like MOM, NEA and HDB is a key role which is also a key performance measurement of WSHO cum ECO.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Certified NEA, ECO, ECO, ECMO
• At least 3-5 years' on-site experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues.
• Production and maintaining of drawings from BIM (Revit) model and ensure proper transmission of data to all parties involved.
• Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Transform AutoCAD drawings into 3D drawings.
• Ensure BIM standards and Level of Development (LOD) are followed.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

. Develop BIM Project Execution Plans, BIM collaboration, documentation, enforcement, monitoring, and workflow to meet project requirements

. Provide solutions for BIM-related technical issues and assist project teams with BIM implementation

. Set up processes and workflows for efficient delivery of BIM deliverables

. Establish guidelines for internal and external model exchanges between project stakeholders and monitor progress

. Attend client meetings and lead decision-making processes affecting BIM deliverables

. Liaise and coordinate with other trades for cross-team support on BIM software

. Regularly meet with key project staff to update on progress and document meeting minutes

. Oversee BIM coordination and daily management of BIM project data sets/workflows and project setup

Job Requirements:

. Certificate in AutoCAD Autodesk advanced module

. Certificate in Revit MEP Autodesk advanced module

. Minimum 10 years of experience in M&E drafting using AutoCAD, Revit, and BIM preferably from the Construction industry

. Outgoing personality with strong interpersonal and communication skills

. Ability to work independently and target-oriented in a stressful environment

. Ability to work well in a team and demonstrate initiative and commitmen

Singaporean and Malaysian apply only

Lorry pick up at Yio Chu Kang Heavy Vehicle Park

Do call or WhatsApp me.at 81619787

Job description -

• Responsible for the preparation and accurate outgoing/incoming passenger messages and other written communication
• Coordinate all passenger Service matters through ATOC and Air Mobility Command when necessary
• Maintain all updated Passenger Service AMC instructions
• Answer passenger inquiries and provide assistance
• Initiate lost and found reports
• Examine each outbound passengers's travel documentation to ensure valid travel authorisation
• Receive, tag and weigh passengers's baggage
• Prepare boarding pass and make seat assignements for all outbound passengers
• Ensure mission arrival/departure board reflects the most current information
• Prepare month end reports
• Input passenger data into AMC Global Air Transportation Execution System (GATES)
• Collect charges
• Conduct anti-hijacking inspections
• Operate Air Terminalk X-Ray machine
• Prepare passenger manifest
• Perform other related duties assigned by the Station Manager

Drive lorry

Office at Pandan Loop

Delivery Islandwide

0900am to 0600pm

Monday to Friday

Local/PR with CPF contribution

Work Incentives

Performance Allowance

Responsibilities:

Post Contract Stage

• Understand and reasonably interpret contract document & drawing
• Understand contract provision thoroughly and advise the risk/areas of concern
• To perform measurement and cost breakdown
• To prepare payment certification to sub-contractor/ supplier
• To prepare payment claim to client
• To identify and evaluate variation work

Requirement:

• Diploma / Degree in Quantity Surveying

1. supervised the construction site.
2. Understanding the auto-cad will be an advantage.
3. Good communicate skill with our foreign workers (Bangladeshi).