(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• MIn 3 years QAQC experiences in building projects.
• Detail-oriented and have strong communication skills and able to work with people from all levels.

The Site Engineer (Building) is responsible for assisting on the progress of site works and manpower related aspects of the project.

The responsibilities of this position are, and not limited to, as follows:

• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Qualifications and Education Requirements

• Education: Degree in Civil Engineering
• Experience: Prior 3 years experience in building projects

Responsibilities:

• Responsible for upkeep of cleanliness of office, compound, pantry and toilet
• Ensure safety practices and housekeeping are maintained to the highest standard
• To perform Ad-Hoc duties as per assigned

Requirement:

• Minimum 1 year of relevant experience
• Basic cleaning skills

• To conduct / plan safety inspection to verify safety provision and provide recommendations for improvements conforming to worksite rules and regulations to comply with statutory requirements
• To investigate any accident, dangerous occurrence or occupational disease that occurred within the workplace and provide recommendations for countermeasures to prevent recurrence
• Implementation and revision of Risk Management
• Liaise with Ministry of Manpower on safety issues and safety statutory requirements
• Establish, update, maintain, and implement the Safety & Health Management System
• To conduct relevant safety training needs e.g. Safety induction, Permit to Work, Safe Work Procedures etc.
• Identify training needs for safety personnel and recommend the required training to ensure competency of the workforce.
• To conduct Safety Committee Meeting to address safety issues and ensure a safe working environment for all personnel
• Ensure in-house rules and regulations are implemented and enforced diligently at the worksite.
• Coordinate safety promotional activities to develop and maintain safety awareness among all personnel
• Evaluate, select and control sub-contractors to ensure awareness of their safety obligations on site
• Review, assess and maintain the Safety Data Sheets
• Ensure storage, movement, use, and disposal of hazardous substances and chemicals are well managed
• Ensure the register of hazardous substances is up to date
• Continuously review the emergency procedure and update.
• Manage and control situations arising during an emergency
• Plan and implement occupational health programs to protect workers from health hazards such as noise, dust, toxic gases, vapors and radiation
• Coordinate safety audit and ensure the closure of all findings
• Coordinate the preparation and submission of all required safety reports e.g. Integrated Management System (IMS) Quarterly report, Risk Assessment review
• Updates on codes of practice & safety literature and circulates information to each level of employees
• Monitor the Safety Performance of the project as set by the company policy and objectives e.g. Accident Frequency Rate (AFR), Accident Severity Rate (ASR) etc
• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999
• Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)Ensure safety practices and housekeeping is to maintained to the highest standard

Requirements:-

• Must possess registered MOM WSH Officer license
• Min 3 years’ WSH Officer experience in Building projects

Responsibilities:

• To review, conduct incident / accident investigation and provide recommendations for countermeasures and to prevent recurrence of accident
• To coordinate of daily toolbox meeting and upkeep the records
• To conduct daily safety inspection and other type of safety inspection as required at work site
• To coordinate the immediate rectification of unsafe conditions and correct any safety malpractices on site
• Monitor and oversee the enforcement of In-house Rule and Regulation and ensure safe work practices on site
• Coordinate and conduct the safety induction course to all site staffs
• Submission of Quarterly EHS performance & 6-monthly review of Risk Assessment
• Ensure and to carry out duties in accordance to WSH Act & Integrated Management System
• Assist WSHO to establish, update, maintain, and implement the Safety and Health Management System
• To assist WSHO for all safety promotional activities, safety audits, safety meetings and execution of safety programmes

Requirements:

• Advanced Certificate in Workplace Safety and Health or equivalent
• Minimum 2 years of relevant working experience

Job Descriptions:

• Reports to Project Manager.
• Provide admin duties and clerical supports to project team·
• Create and maintain proper indexes for documents filed in records·
• Distribution of emails and correspondences·
• Document controlling of site records and reports·
• Assist the Project Manager in administrating documents &/or purchase orders·
• Update manpower movement constantly· Compile the documents according to ISO requirements.·
• Assist project team in liaising with Head Office for related administration and personnel matters.·
• Handle with site stationeries ordering.

Job Requirements.

• Knowledge in Microsoft Office applications.
• Good organisation and multi tasking skills.
• Min GCE 'N' or 'O' level qualification.
• At least 3 year working experience in project site preferred

We regret that only qualified candidates will be informed.

This role reports to the Assistant Manager, Transport or the Assistant Transport Controller.

The Transport Coordinator supervises and monitors the truck drivers well-being and ensure they are performing in accordance to delivery schedule and servicing schedule. He/She will have to follow up and manage drivers' attendance and will need to head to different construction sites to monitor and supervise other drivers.

• Work closely with site personnel for delivery scheduling
• Propose alternate solutions in meeting target if the schedule or work failed to be achieved
• Attend truck related court cases when applicable
• Ensure well keeping and maintenance of all trucks
• Ensure the practices and procedures meet legal guidelines, and health and safety requirements
• Ensure safety practices and housekeeping are maintained to the highest standard
• To perform Ad-Hoc duties as per assigned

Required:

• Familiar with Singapore Routes
• Night shift required if assigned

Assembles, installs, tests and maintains electrical or electronic wiring, equipment, appliances, apparatus and fixtures using hand tools or power tools

Use building electrical distribution drawings, schematic, logic, single line drawings to diagnose electrical failures to 69kv.Use electrical drawings for new or expanding building projects and installation or relocating new or used equipment

Conducts routine testing on all electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures using testing devices to ensure compatibility and safety of systems in and around all applicable GHS facilities

Engineering technicians,Installation: Setting up and testing products to ensure they work correctly,Maintenance: Performing regular checks and troubleshooting to ensure equipment is operating at its best,Repair: Using diagnostic tools to determine repair plans and fixing issues that may interfere with daily functions,Support: Providing on-site assistance with hardware and software use, and addressing technical issues,Training: Teaching customers how to use their products.

Installation: Installing electrical wiring, fixtures, and equipment, as well as conduits and pipes to house electrical wires and cables,Maintenance: Performing general electrical maintenance, and inspecting electrical components like circuit breakers and transformers,Repair: Repairing or replacing electrical wiring, equipment, or fixtures,Troubleshooting: Identifying electrical problems and troubleshooting malfunctions

• Public Relations Officer (PRO), with a minimum 3 years' relevant experience and designate a team of staff who are familiar with multimedia presentation, from the commencement of the Works up to the Substantial Completion of the Works.
• Handling feedback and complaints from client and public in a professional manner.
• Provide full public relations services to the project.
• Work closely with Project Manager and team.
• Provide administrative assistance to the team.
• Other ad hoc duties assigned by project management from time to time.
• The PRO shall liaise with and assist the Employer's Corporate Communications Group (CCG) , as well as Manager for Community Partnership Division (MCPN) for all public relations matters in connection with the Contract.
• The PRO is to place top priority in PR matters and public feedback.
• The PRO shall be 24 hours contactable by the Employer.

Requirements:

• Possess public relations experience in construction industry is an advantage.
• Good communication skills.
• Pleasant personality, good team player, and proactive.
• Willing to work at project site office.
• Attached to a team and required to support projects managed by your team.
• Any degree, however civil and construction are preferred.

Requirements:

• Candidate must possess at least Diploma in Quantity Survey/Building or equivalent
• Minimum 3-4 years of relevant working experience in Quantity Estimating/ Surveying Works in construction firm for senior post
• PC Literate (MS word / Excel)
• 5-day work week

Responsibilities:

• Responsible for all works related to Quantity Surveyor duties
• Liaise and establish rapport with consultants, quantity surveyors, architects, developers
• Able to prepare cost estimation, quantity take-off and cost evaluation
• Evaluate Contract/ Sub-Contract works
• Carry out other Contracts Administration activities

Job description:

• Responsible for contract documentation
• Responsible for taking off measurement and preparation of tender submission
• Responsible for handling running project
• Review the subcontractor’s quotation for completeness
• Responsible for filing of respective project documents
• Assist and perform all tasks assigned by respective superior
• Ensure the return of duly signed subcontractor/supplier agreement/works order
• Other ad-hoc duties assigned by superior

Job Requirements:

• Degree / Diploma in Quantity Surveying and Building or equivalent with 2 years relevant experiences in construction or equivalent
• Process good knowledge of the market updates and construction cost trend
• Good communication and negotiable skill

Responsibilities:

· Coordinating, planning and conducting the project plan

· Project formulation and monitoring progress and schedule

· Effective communication and co-ordination between project participants

· Attend site meeting, inspect, monitor and report project progress.

· Submit and update monthly project status

· Perform other duties or tasks as assigned by immediate superior or Project Manager

Requirements:

· Degree in Civil/Structural Engineering or its equivalent

· At least 3 years relevant working experience as Project Engineer in main contractor office

· Proficient in MS Office Word, Excel and Project Scheduling software

· Bilingual with good communication skills

Job description

· Responsible for the planning, management, and coordination of the MEP Subcontractors testing & Commissioning activities.

· Ensure that the required tests and inspections are performed in accordance with the approved plan.

· Follow-up with subcontractors to resolve any deficiencies that are found.

Job requirement

· Minimum of 10 years engineering experiences in construction industry with relevant diploma.

· Minimum of 5 years construction experience for similar size complexity projects & complexity projects.

1. Primary Responsibilities

• Project Maintenance Management: Oversee maintenance teams’ tasks across multiple project sites, ensuring timely, cost-effective, and quality service.
• Scheduling & Planning: Develop, schedule, and rectification procedure and ensure timely repairs.
• Budgeting & Cost Control: Manage maintenance team expenditures and track expenses, and identify cost-saving measures.
• Quality Assurance: Ensure maintenance team meets industry standards, client requirements, and conmpany’s quality guidelines.
• Risk & Compliance: Ensure adherence to safety protocols, compliance with regulatory and company standards, and mitigate risk on project sites.
• Client Liaison: Act as the primary contact for clients and consultants concerning maintenance and defect rectification.
• Vendor & Supplier Coordination: Manage relationships with suppliers, negotiate service contracts, and ensure materials meet project specifications.

2. Leadership and Team Management

• Team Supervision: Lead and manage maintenance staff, including training, scheduling, and performance evaluations.
• Training & Development: Ensure that maintenance personnel are trained in safety procedures, equipment handling, and troubleshooting.
• Performance Monitoring: Regularly assess team performance, address any gaps, and promote staff development and skill enhancement.

3. Technical Skills and Knowledge

• Technical Knowledge: Deep understanding of construction technology and method used in the industry and expertise in their maintenance and preventive requirements.
• Problem Solving: Diagnose and resolve maintenance issues efficiently to minimize inconvenience to client.
• Safety Standards: Strong knowledge of workplace safety and health regulations, particularly in construction site.
• Software Proficiency: Familiarity with relevant software for planning and record-keeping.

4. Reporting & Documentation

• Maintain accurate records of maintenance activities, including work orders, inspection reports, and incident logs.
• Provide regular updates and detailed reports to management and clients on equipment performance, maintenance costs, and any challenges.

5. Qualifications

• Education: Degree in engineering, facilities management, or related field.
• Experience: At least 7-10 years of experience in a maintenance role, with prior leadership experience preferred.
• Skills: Strong communication, negotiation, and project management skills.

6. Key Competencies

• Analytical Thinking: Ability to assess needs and identify areas for improvement.
• Attention to Detail: Precision in inspection, rectification procedures, and adherence to protocols.
• Time Management: Efficiently prioritize tasks and manage resources to meet deadlines.
• Adaptability: Ability to handle unexpected challenges and adjust maintenance plans as needed.

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues.
• Production and maintaining of drawings from BIM (Revit) model and ensure proper transmission of data to all parties involved.
• Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Transform AutoCAD drawings into 3D drawings.
• Ensure BIM standards and Level of Development (LOD) are followed.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job description

· Review the safety management system and offer suggestions for enhancement.

· Implement and oversee the ECM Plan as per requirement.

· Collaborate closely to monitor earth control activities at different stages of the project.

· Manage on-site safety audits.

· Investigate incidents/accidents and propose corrective actions to prevent recurrence.

· Ensure staffs adhere to statutory acts, regulations, company safety protocols, and industry codes.

· Demonstrate effective communication abilities to interact with colleagues, clients, and governmental bodies.

· Perform any other ad-hoc duties as assigned.

Requirements

· Diploma in Workplace Safety & Health or equivalent

· Registered WSHO with ECO and ECMO

1. Primary Responsibilities

• Quality Planning & Documentation: Develop, implement, and maintain a project-specific Quality Assurance (QA) and Quality Control (QC) plan that aligns with BCA CONQUAS standards, ensuring all quality processes meet assessment criteria.
• CONQUAS Compliance Monitoring: Monitor construction activities to meet CONQUAS requirements, ensuring each component (structural, architectural, and M&E works) adheres to the system’s quality benchmarks and detailed criteria.
• Material Inspection & Testing: Oversee the inspection and testing of materials used on-site, ensuring conformity with BCA-approved materials and standards under CONQUAS. This includes managing third-party testing agencies when required.
• Site Audits & Inspections: Conduct frequent site inspections and audits focused on CONQUAS criteria, including workmanship, material application, and defect minimization in structural, architectural, and M&E works.
• Non-Conformance Management (NCR): Identify, document, and address non-conformances, particularly those impacting CONQUAS scoring. Recommend corrective actions, ensuring rectifications align with quality standards to avoid future issues.

2. Collaboration with Project Team

• Coordination with Site Engineers & Supervisors: Work closely with site engineers and supervisors to ensure construction methods comply with CONQUAS specifications, providing guidance on quality protocols and rectifications as needed.
• Client & Consultant Interaction: Act as the primary quality liaison with clients and consultants, updating them on QA/QC matters and addressing quality concerns directly related to CONQUAS scoring.

3. Reporting & Documentation

• Quality & CONQUAS Reports: Prepare quality and assessment reports, including checklists and summaries that reflect compliance with CONQUAS scoring standards, inspection records, and non-conformance resolutions.
• Record Management: Maintain comprehensive QA/QC records, including BCA CONQUAS documentation, material certificates, inspection logs, and testing results.

4. Technical Skills and Knowledge

• CONQUAS Standards & Guidelines: In-depth knowledge of BCA’s CONQUAS standards, especially in structural, architectural, and M&E works criteria, assessment scoring, and inspection guidelines.
• Inspection Techniques & Tools: Proficiency in inspection techniques and tools that align with CONQUAS criteria, including non-destructive testing (NDT) and visual inspection practices.

5. Training & Development

• CONQUAS Training for Team: Train the construction team on CONQUAS requirements, quality assessment protocols, and best practices to enhance work quality and scoring.
• Continuous Improvement: Promote continuous quality improvement initiatives that reflect CONQUAS requirements, addressing observed quality gaps with updates to procedures.

6. Qualifications

• Education: Diploma/ bachelor’s degree in civil engineering, construction management, or related field
• Experience: 3-5 years of experience in a QA/QC role within the construction industry, with added experience in managing Quality Marks assessment processes or certifications a significant advantage
• Certifications: BCA-Approved CONQUAS training or relevant quality certification such as ISO 9001:2015 in Quality Management Systems.
• Skills: Strong analytical skills, attention to detail, and the ability to assess and improve quality standards.

7. Key Competencies

• Attention to Detail: Strong focus on details in line with CONQUAS quality metrics for structure, architecture, and M&E works.
• Communication Skills: Ability to clearly communicate quality standards, updates, and CONQUAS requirements to all team members and stakeholders.
• Problem Solving & Decision-Making: Effective in resolving quality issues that may affect CONQUAS scoring, ensuring timely solutions.
• Adaptability: Ability to adjust processes to meet dynamic project needs while adhering to CONQUAS standards.

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

1. Assist to identify and correct unsafe conditions and work practices;
2. Provide recommendations for improving safety in the workplace;
3. Ensure that all works are performed according to the approved method statement, risk assessment, and SWP;
4. Maintain all equipment and machinery on site and ensure all required certificates are in place;
5. Conduct and keep record of daily WSHE inspection;
6. Carry out daily joint WSHE inspection together with sub-contractor’s WSH Coordinator/ Supervisor and timely rectify any unsafe acts or conditions;
7. Maintain documentation of the company's safety procedures, accidents and related events;

Accounts Executive

Hexacon Construction is seeking an accounts executive immediately.

What’s on offer

This is a permanent role based at Balestier Road.

· SGD 2,600 - $3,700 monthly, depending on experience and qualifications

· 5-day work week

· 14 days annual leave

· 3 months probation

Reporting to the Finance Controller and Senior Accountant, you are responsible for:

· Maintain accounting general ledgers within accounting software and on Excel

· Perform general ledger, bank, supplier statement reconciliation

· Assist in preparing monthly management accounts, quarterly GST Form 5

· Assist with auditor and tax agent queries, providing of relevant information

· Accurate data entry into claims submission, supplier and payment processing

· Other ad-hoc duties

The successful candidate should:

· Degree / diploma in accountancy

· Ideally, 1-3 years of accounting experience. However, fresh degree / diploma graduates are still welcome to apply

· Meticulous, with an eye for detail

· Spoken and written English proficiency

· Candidates with prior experience with IFCA accounting software will have a significant advantage, but not a must

· Live within the Balestier / Toa Payoh / Bishan area

Job Description:

• Manage the recruitment process for construction staff (e.g., engineers, coordinators, managers) and site workers.
• Utilize job portals, recruitment agencies, and social media platforms to identify potential candidates.
• Conduct initial resume screenings and shortlist candidates for interviews with hiring managers.
• Schedule interviews with candidates and assist in the interview process.
• Support in making job offers and negotiating terms with selected candidates.
• Maintain and update recruitment records, including interview outcomes and new joiner documentation.
• Oversee the onboarding process for new joiners, including briefing them on administrative details and benefits.
• Organizing recruitment campaigns, job fairs and other events to attract candidates.
• Handle processes related to work pass applications and statutory requirements for housing, medical etc.

Requirements:

• Diploma/Degree in Human Resources, Business Administration, or a related field.
• 1-2 years of experience in recruitment, preferably within the construction industry.
• Strong understanding of recruitment processes for both construction staff and workers.
• Knowledge of local employment laws, work permits, and foreign worker regulations.
• Excellent organizational, communication, and interpersonal skills.
• Proficiency in Microsoft Office.

Job Description

• Lead and guide sub-contractor to achieve quality workmanship
• Handle paperworks , defects issuance and reporting
• Conduct defects investigation and identification

Requirement

• Minimum 4 years in CONQUAS
• Possess at least 2 good industry practices certificates
• Microsoft office knowledge
• Able to communicate with client and consultant