ECO cum WSH Coordinator

Job Description

i) To work with the PM to comply with environmental, health & safety (EHS) laws laws, advise PM on environmental remediation measures, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards

ii) Work with the PM to draw up, implement and monitor effective environmental management plans, including reviewing them when necessary:

· Prepare & submit to the PM the Site Environmental Control Programme before work commences at the worksite.

· Prepare & submit to the PM the Site Environmental Control Report once every two weeks.

iii) Inspect the construction site to ensure all facilities, equipment and operations do not pose any environmental health hazard;

iv) Inspect the on-site canteen, worker’s quarters, if any, and dining areas to ensure that good hygiene practices are being observed, and the areas are well maintained with good housekeeping.

v) Identify and discuss environmental health irregularities or potential lapses with the PM, and recommend corresponding measures to prevent or rectify such concerns;

vi) Attend to all feedback on any irregularities and inform the PM accordingly;

vii) Assist the authorities to investigate outbreaks of infectious, vector-borne or food-borne diseases at the construction site; and

viii) Organise campaigns, training courses and other activities, where required, to develop and sustain the interest of workers in maintaining good environmental health standards.

ix) Conduct inspection of the ECM at the worksite in accordance to ECM plan

x) Maintain records of all inspections.

xi) Advice the PM & project team members on the implementation of the EHSMS & implement the EHSMS.

xii) Assist the PM identify any unsafe work condition or unsafe work practice which is carried out in the worksite;

xiii) Recommend to the PM to implement such reasonably practicable measures to remedy the unsafe work condition or unsafe work practice;

xiv) Assist the PM implement such reasonably practicable measures referred to in (xiii) or safe work procedures.

xv) Advice the PM & the project team members on the implementation of the EHSMS.

xvi) Implement the EHSMS.

xvii) Stop the work or recommend to the PM / WSHO to stop the work if it is deem not safe for the work to continue.

xviii) Inform the higher level of management (e.g. Project Director) if conflict between EHS issues & operational considerations at the worksite cannot be effectively resolved.

xix) Report to PM

xx) Perform any duties assigned by PM.

Job Requirements

• Registered ECO by NEA
• Diploma in Public Health
• WSQ Advanced Certificate in Workplace Safety and Health
• Min 3 years of experience in the building & construction industry

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Descriptions:

• Handle all purchasing duties
• Prepare, review and place purchase orders
• Assist in Schedule purchases and arrivals
• Maintain inventory
• Coordinate with internal parties involved in procurement matters
• Maintain and update purchasing documents/ records and approved external provider list
• Ensure purchasing functions conformance to plant requirements
• Build and maintain good relationship with current and new vendors
• Any other ad-hoc tasks and activities assigned.

Requirements:

• Minimum Diploma in Supply Chain/ Purchasing or equivalent
• At least 1 Year(s) of working experience in the related field
• Basic mathematical knowledge
• Knowledge of procurement processes, policies and procedures
• Meticulous with good organization, negotiation and analytical skill
• Commitment and initiatives to complete any urgent tasks timely
• Good time management
• Being able to start work immediately would be advantage.
• Must be able to travel overseas for purchasing

Singaporean and Malaysian apply only

Lorry pick up at Yio Chu Kang Heavy Vehicle Park

Do call or WhatsApp me.at 81619787

Job description -

• Responsible for the preparation and accurate outgoing/incoming passenger messages and other written communication
• Coordinate all passenger Service matters through ATOC and Air Mobility Command when necessary
• Maintain all updated Passenger Service AMC instructions
• Answer passenger inquiries and provide assistance
• Initiate lost and found reports
• Examine each outbound passengers's travel documentation to ensure valid travel authorisation
• Receive, tag and weigh passengers's baggage
• Prepare boarding pass and make seat assignements for all outbound passengers
• Ensure mission arrival/departure board reflects the most current information
• Prepare month end reports
• Input passenger data into AMC Global Air Transportation Execution System (GATES)
• Collect charges
• Conduct anti-hijacking inspections
• Operate Air Terminalk X-Ray machine
• Prepare passenger manifest
• Perform other related duties assigned by the Station Manager

Drive lorry

Office at Pandan Loop

Delivery Islandwide

0900am to 0600pm

Monday to Friday

Local/PR with CPF contribution

Work Incentives

Performance Allowance

• Understanding the client requirements and quantities take off as per marking and RCP drawings.
• Preparing BOQ (bill of quantities) by studying specification sheets from the sales team.
• Identifying gaps between BOQ and drawings, specifications and conditions of the contract and taking it for a logical closure.
• Monitor and control costs throughout the project, identifying cost-saving opportunities.
• Participation in the pre-tendering activities with client, architect and project managers and raising relevant pre-bid queries from the given tender.
• Preparing the initial quote and contract for the sales team from the company’s side.
• Coordination with the design team for analysing architectural and service drawings.
• Manage the valuation of work done and handle claims and variations.
• Preparing interim and final valuations, variations and claims of the construction site.
• Conduct feasibility studies and value engineering exercises.
• Collaborate with stakeholders to optimise project outcomes and achieve value for money.
• Reviewing construction plans and preparing quantity requirements.
• Scrutinizing maintenance and material costs, as well as contracts to ensure the best deals.
• Liaising with site managers, clients, contractors, and subcontractors.
• Preparing reports, analyses, contracts, budgets, risk assessment, and other documents.
• Advising managers and clients on improvements and new strategies.
• Keeping track of materials and ordering more when required.
• Documenting any changes in design and updating budgets.
• Establishing and maintaining professional relationships with external and internal stakeholders.
• Traveling from the office to various sites as required.

Make orders for construction materials and other items as requested.

•  Ensure timely delivery of orders.
•  Ensure all delivery orders are in accordance to PO and verification of DO for preparation of payment.
•  Call for quotations and source for new supplies if need and recommendation of award.
•  Follow up on complaints on product quality.
•  Process and generate PO/RO
•  All other tasks assigned
• Bachelor’s degree in quantity surveying, engineering, construction management or a related field.

3+ years of experience in quantity surveying in the construction industry.

• Sound knowledge of construction industry practices, regulations and standards.
• Proficiency in cost estimation and cost management techniques.
• Familiarity with contract administration and legal aspects of construction projects.
• Understanding general contracting, design-build, package contracting, value-based project and loading margins and lumpsum in commercial fit-out, residential, hotel or retail projects.
• Experience working with AutoCAD and validating quantities from the given drawings.
• Ability to manage multiple projects simultaneously and prioritise tasks effectively.
• Strong analytical and problem-solving skills with extraordinary negotiation abilities.
• Proficiency in relevant software and tools for quantity surveying.

· Attend to day-to-day needs of office

· Checking & follow-up on delivery & proper submission of supporting documents and endorsement by staff for

payment

· Perform admin task like filing, photocopy

· Maintain office stocks e.g. forms, pantry and Sundry

· Collating data & survey, etc

· Compilation of statistics.

· Provide ad-hoc admin support to HODs

. Conduct feasibility study to develop basic and detailed engineering designs.

. Manage budget and resources to ensure timely project completion.

. Manage project to ensure compliance with legal and safety requirements.

. Motivate team members and develop their skills.

. Oversee workplace safety to ensure work is performed according to workplace safety procedures.

. Minimum 1 years experience in Building Construction works.

Job Description & Requirements

• Manage team of engineers and supervisors to oversee daily tunneling activity
• Review and set TBM parameters
• Review geotechnical data and plan ahead tunneling works to ensure smooth tunnel progress
• Review and carry out procurement based on recource requirement
• Attend daily and other ad-hoc meetings with client to update on tunnel progress
• Review and prepare method statements for submission to client
• Ensure job safety analysis and site safety compliance

Requirement

• Degree in Civil engineering or equivalent
• More than 8 years hands on site experience in TBM for tunneling works, preferred with previous experience in handling Singapore MRT projects and large diameter TBM projects.
• Able to do shift work
• Independent and self-motivated

Must meet the following criteria:

1)Degree and qualifications in related field.

2)Must be able to speak and understand English so as to communicate with the team members.

3)Must be able to lead a groups of worker.

4)Must be a good leadership.

5)Must be able to coordinate workers and projects.

6)Must be able to work under tight deadlines.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

ECO cum WSH Coordinator

Job Description

i) To work with the PM to comply with environmental, health & safety (EHS) laws laws, advise PM on environmental remediation measures, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards

ii) Work with the PM to draw up, implement and monitor effective environmental management plans, including reviewing them when necessary:

· Prepare & submit to the PM the Site Environmental Control Programme before work commences at the worksite.

· Prepare & submit to the PM the Site Environmental Control Report once every two weeks.

iii) Inspect the construction site to ensure all facilities, equipment and operations do not pose any environmental health hazard;

iv) Inspect the on-site canteen, worker’s quarters, if any, and dining areas to ensure that good hygiene practices are being observed, and the areas are well maintained with good housekeeping.

v) Identify and discuss environmental health irregularities or potential lapses with the PM, and recommend corresponding measures to prevent or rectify such concerns;

vi) Attend to all feedback on any irregularities and inform the PM accordingly;

vii) Assist the authorities to investigate outbreaks of infectious, vector-borne or food-borne diseases at the construction site; and

viii) Organise campaigns, training courses and other activities, where required, to develop and sustain the interest of workers in maintaining good environmental health standards.

ix) Conduct inspection of the ECM at the worksite in accordance to ECM plan

x) Maintain records of all inspections.

xi) Advice the PM & project team members on the implementation of the EHSMS & implement the EHSMS.

xii) Assist the PM identify any unsafe work condition or unsafe work practice which is carried out in the worksite;

xiii) Recommend to the PM to implement such reasonably practicable measures to remedy the unsafe work condition or unsafe work practice;

xiv) Assist the PM implement such reasonably practicable measures referred to in (xiii) or safe work procedures.

xv) Advice the PM & the project team members on the implementation of the EHSMS.

xvi) Implement the EHSMS.

xvii) Stop the work or recommend to the PM / WSHO to stop the work if it is deem not safe for the work to continue.

xviii) Inform the higher level of management (e.g. Project Director) if conflict between EHS issues & operational considerations at the worksite cannot be effectively resolved.

xix) Report to PM

xx) Perform any duties assigned by PM.

Job Requirements

• Registered ECO by NEA
• Diploma in Public Health
• WSQ Advanced Certificate in Workplace Safety and Health
• Min 3 years of experience in the building & construction industry

Job Description:

• Competent in reading and understanding drawings and perform measurements.
• Competent in preparing Bills of Quantities.
• Competent in understanding tender/contract/document/specifications/terms of contract
• Competent in analysing quotations/prices/rates, build-up rates and perform pricing
• Competent in performing contract administration including but not limiting to valuation of payments and variations claims in accordance to contract requirements
• Competent in performing all tender activities necessary for the procurement of new projects
• Competent in performing any other activities in connection with the businesses of the holding company
• Competent in working independently as well as with a team
• Participate in any activity ancillary to the company's other objectives e.g. charity events
• Competent in completing required obligations within stipulated timings and other constraints

Job Requirements:

• Bachelor's Degree in Quantity Surveying
• Minimum 3 years of working experience, preferably in the construction industry
• Proficient in Microsoft Office Tools

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description

a) Report to the Project Manager. Responsible for the EHS systems and implementations.

b) The detailed duties and responsibilities includes but not limited to the following:

• Assist and advise the Project Manager on EHS planning for overall project scope and detailed activities.
• Study and fully understand the requirements of company ISO, EHS and sub-contracts agreements.
• Liaise, handle and keep proper records in dealing with all related authorities in complying with their respective requirements.
• Conduct regular site audits to ensure compliance with EHS requirements. He is authorized to take necessary actions including issuance of partial stop work order as he and the Project Manager deem fit.
• Handle all accident and incident reports.
• Work as a team with project team members and sub-contractors to provide a safe working environment.
• Prevention of fines, imposition of demerit points and SWO from the authorities or owners like MOM, NEA and HDB is a key role which is also a key performance measurement of WSHO cum ECO.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Certified NEA, ECO, ECO, ECMO
• At least 3-5 years' on-site experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues.
• Production and maintaining of drawings from BIM (Revit) model and ensure proper transmission of data to all parties involved.
• Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Transform AutoCAD drawings into 3D drawings.
• Ensure BIM standards and Level of Development (LOD) are followed.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Responsibilities:

Post Contract Stage

• Understand and reasonably interpret contract document & drawing
• Understand contract provision thoroughly and advise the risk/areas of concern
• To perform measurement and cost breakdown
• To prepare payment certification to sub-contractor/ supplier
• To prepare payment claim to client
• To identify and evaluate variation work

Requirement:

• Diploma / Degree in Quantity Surveying

Job Description

• Preparing contract documents, working with quantities, taking off measurement, providing cost estimates and managing cost information.
• Evaluation and certification of subcontractor progress payments.
• Prepare tender submissions, handle progress claims and progress payments, VO & finalization of accounts.
• Negotiation of price with suppliers & subcontractors, including of awarding subcontracts agreement.
• Work closely with control project manager to ensure all the cost is aligned.
• Any other other ad hoc duties assigned.

Requirements:

• Min 1 years of relevant Tender/ Project Quantity Surveyor experience for the Construction industry
• Familiar with Building/ Civil Projects
• Well-organised, meticulous and attentive to details
• Flexible mindset and able to multi-task

· Handle quarterly GST submission and receivables

· Perform Accounts Payable function (i.e process invoices and payments)

· Manage month end close process and ensure all journals, bank reconciliations & etc

· Prepare monthly management reports

· Preparing documents for annual audits and liaising with auditors

· Liaise and communicate with internal related departments

· Ensuring compliance with current accounting standards

· Preparation of monthly cash flow

· Assist in any other ad-hoc duties as assigned

· Prepare software Skills IFCA ,Others

Responsibilities:

• Work closely with business user and software/system architect.
• Gather and analyze requirement from stake holder, including business requirement document.
• Conduct technical feasibility study, analysis requirement specifications to design and architect solutions including developing proof of concepts.
• Translate business requirement into documented technical and data design specification.
• Perform code development, involve in code review, user acceptance testing and sign off.
• Perform implementation, provide post-implementation maintenance support and fine tuning.
• Collaborate with team members to deliver high quality and high-performance .net applications, web and mobile applications.

Requirements:

• Possess a Degree/Diploma in Computer Science / Information Technology (IT,Design) or equivalent.
• Proficient experience with programming language in VB,C# ASP.Net and/or Android, IOS.
• Good HTML5, CSS3, JavaScript, jQuery, Bootstrap responsive web and mobile design.
• Technically proficient with database programming language SQL.
• Demonstrated expertise with MS excel based programming using VBA.
• Experience in SharePoint, Power BI, Power Apps and PHP is an added advantage.
• Technically competent with EDI integration, including web services, Rest API.
• Ability to work under pressure and to tight deadlines.
• Ability to communicate complex concepts.
• Good interpersonal, analytical and problem-solving skills.
• Minimum 2 years of relevant working experience is required

General Summary of Responsibilities:

• Heads a Property Management Sub Team.
• Responsible to the Director (Ops) for the business result of the Team.
• Undertake continued development of the Team in accordance with the approved business plan.
• Source business for the company / division generally by client contact, networking as well as general promotion of PFS services.
• Undertake training and development of the people within the Team and promote an on-going career path for them within PFS.
• Provide leadership, managerial direction and personal encouragement to all employees within the Team, including guidance on all property management procedures.
• Responsible for the efficacy of complaints management within the Team.
• Liaise with existing building owners on property management performance, including the use of tenant and client surveys.
• Prepare agendas, minutes recording and convene and attend all Council meetings and Annual General Meetings

Requirements

• Degree / Diploma in Building/ Real Estate Management or other related discipline with minimum 6 years of property management experience; inclusive of at least 3 years in a managerial role
• Experience in MCST work and knowledge of BMSMA is a must.
• Matured and independent with the ability to lead team
• Strong negotiation, communication and leadership skill
• Diligent, well organised and committed to excellence

Supervise and train workers.

Guarantee all safety precautions and quality standards are met.

Resolve problems when they arise.

Proven experience as construction assistant foreman.

In-depth knowledge of construction procedures, equipment and OSH guidelines.

Ability to communicate and report effectively.

Problem-solving abilities.

-Looking for SPM for civil, external, structural and interior fitting out works.

- To also be well verse with MEP, ACMV and architectural works. To chair meeting with client & consultant, to manage sub contractors, scheduling works. Authorities submission and laison with contractor PE for any design and submission as required.

-Develop, Monitor, update and report on project progress to ensure timely completion of work.

-Ensure compliance to quality and safety standards. Ensure workers adhere to safety regulations and are in a safe working environment.

-Liaise with sub-constructors, vendors, clients to ensure smooth progression and timely completion of quality works in accordance to schedule within required regulations,contract specifications.

-Lead a Project Team of consultants, contractors in daily-site activities.

-Minimum 10 years and above of working experience