• Reports to Safety Manager
• Conduct inspection with sub-contractors’ supervisors.
• Ensure all machinery and equipment at site are in good working conditions and having all the necessary certificates.
• Ensure all workers at site are wearing appropriate PPE at all time.
• Conduct safety talk/briefing.
• Ensure proper housekeeping by the sub-contractors on the daily basis.
• Conduct daily toolbox meeting with the sub-contractors.
• Conduct safety induction programme for new workers.
• Conduct daily safety inspection on site.
• Ensure all Quality, Occupational, Health and Safety(OHS) rules, regulations and practices are observed
• Good spoken and written communication skills
• Good at working with people at all levels and willing to work in a team

Job requirements:

• Advanced Certificate in WSH Level B
• Minimum 1-5 years’ experience in similar role
• Location : Tanah Merah
• Project: Pulau Tekong Project

Searching for a Lorry Driver, Class 3 , for our company, to ferry both workers and goods around jobsites

Responsibilities:

1. The ECO shall pay attention to earth control measures and silt control of the Worksite including site checks and submission of reports on alternate days or more frequently if required.

2. ECOs shall use the checklist provided by QECP to carry out the ECM checks. The ECO shall review the checklist and ensure that the ECM is adequate. ECOs shall also highlight problems relating to ECM to QECP so that reviews to the ECM can be done timely.

3. The ECO shall look out for conditions/situations in construction site which causes environmental health problems. He should report these conditions/situations to the occupier of the construction site together with recommendations on remedial measures to be taken to prevent recurrence. The main areas where the ECO should pay attention to are:

· disease-bearing insects and rodents;

· proper disposal of construction waste/marine clay;

· noise, air and water pollution;

· earth littering;

· siltation of drain;

· food hygiene in canteens;

· proper maintenance of septic tank(s)/holding tank(s), chemical/portable toilet(s) and other sanitary facilities; and

· any other environmental health matters.

Requirements:

· Full time

· Registered with the Director-General of Public Health.

· At least 3 years relevant experience.

We regret to inform that only shortlisted candidate will be notified.

The C&S Engineer is responsible for liaising with consultants to develop the structural works and support tender team to prepare technical submission.

Responsibilities:

• To work with the C&S consultants to develop a structural scheme for structures and buildings
• To carry out engineering analysis to assess the structures' stability and load to be sustained
• To prepare temporary works design for construction activities
• To prepare a technical submission and project quality plan for tender projects
• To carry out engineering design according to Eurocodes or relevant international design codes
• To prepare a submission to authorities for approval of design
• Provide technical advice to team members/colleagues in supporting or leading roles and embrace a culture that values teamwork
• To attend project meetings with Clients and Consultants from other disciplines
• To attend site progress meetings and reply to technical queries

Requirements:

• Bachelors Degree in Civil/Structural Engineering
• A minimum of 2-5 years of working experience in a local engineering consulting company or in CW01 A1 general contractor company as C&S Engineer
• Experience of tender (technical part including ERSS Plan, Site Utilization Plan, Construction methodology etc) - Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures
• Competent user of relevant engineering software(Microsoft Project, Power Point etc)
• Able to interact and work with colleagues and members of other consultants at various level

• Assists Project Co-ordinator in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Manages workers work schedule;
• Assists Project Co-ordinator in general worker deployment with Head Office;
• Assists Project Co-ordinator in ordering of raw materials;
• Assists Project Co-ordinator in putting up delivery orders;
• Assists Project Co-ordinator in safekeeping of all tools and equipment;
• Ensure good housekeeping in project sites;
• Assists Project Co-ordinator in monitoring and recommending appropriate risk control measures to reduce or eliminate the risks identified;
• Assists Project Manager and Project Co-ordinator in preparation of risk assessment record after completion of the assessment;
• Assists Project Manager and Project Co-ordinator in risk assessment communication to the workers;

Job Specifications:

1. Educational Qualifications:Diploma or degree in Drafting, Architecture, Civil Engineering, or a related field.
   Certification in CAD (Computer-Aided Design) software is a plus.
   
2. Experience:Minimum 2-5 years of experience as a draftsperson, preferably in the construction or architectural industry.
   Experience in preparing construction drawings and documentation.
   
3. Technical Skills:Proficiency in drafting software such as AutoCAD, Revit, SketchUp, or similar tools.
   Knowledge of Building Information Modeling (BIM) is advantageous.
   Strong understanding of architectural and engineering drawings, standards, and construction methodologies.
   Ability to create detailed 2D and 3D designs.
   Familiarity with materials, structural design, and building codes.
   
4. Key Responsibilities:Prepare detailed architectural and engineering drawings based on specifications and sketches.
   Collaborate with architects, engineers, and project managers to ensure accuracy and compliance with project requirements.
   Modify and revise designs based on client feedback and project needs.
   Maintain and organize all project drawings and documentation.
   Assist in site surveys and measurements to incorporate accurate data into designs.
   
5. Soft Skills:Strong attention to detail and accuracy in work.
   Excellent communication and interpersonal skills for teamwork and client interactions.
   Ability to handle multiple projects and meet tight deadlines.
   Analytical thinking and problem-solving skills.
   
6. Physical and Work Environment Requirements:Ability to work in both office and construction site environments.
   Flexibility to adapt to changing project demands and timelines.
   
7. Additional Requirements:Knowledge of local construction regulations and safety standards.
   Willingness to travel to project sites as needed.
   
8. Preferred Attributes:Creativity and a keen eye for design aesthetics.
   Passion for construction and architecture.
   

• Project Planning & Monitoring, follow-up & prepare report on work site progress work closely with Project Manager on co-ordination & planning for work
• Attend site meeting
• Ensure all works are carried out in accordance to the drawings, specifications, construction plan, procedures, work instructions and most importantly, on schedule
• Co-ordinate all aspects of works with client
• Control the use of site resources and overall project cost & also monitor and control wastage on site
• Working experience in the construction industry - LTA project would be an advantage

Job Description

• Plan, develop and monitor work schedules to ensure timely completion of allocated tasks and schedules
• Prepare reports to clients and project manager on progress, delays, defects and rectification measures for the M&E works
• To check and assess temporary works by the contractors on site to ensure that the C&S, M&E and building works are safe and in compliance with all relevant regulations.
• To ensure that records of all mechanical and electrical engineering works including records of tests, defect rectification, inspections, work progress, material and equipment on site, safety, etc, are timely updated and properly kept, to facilitate the project completion, Rl, TOP and CSC inspections, and Handing Over and Taking Over (HOTO).
• Check and ensure that all mechanical and electrical works are executed in accordance with the design, specifications and codes of practice.
• To make inspections of the works performed and to be performed on site so as to ensure that the works are being executed according to the necessary standards, performance, quality and workmanship.
• Liaise and coordinate with client and/or the Consultant/ Qualified Person to resolve technical and/or interfacing issues with other Site Management Services and contractors.
• To verify reports and claims submitted by subcontractors / vendors/ suppliers and specialist contractors.

Requirements:

• Bachelor Degree in Mechanical / Electrical Engineering or equivalent (due to Project requirement, qualification has to be PEBoard recognised)
• Minimum 5 years’ relevant experience in construction industry for Civil Engineering projects is preferred

Job Description

• Plan, propose, coordinate and execute utility diversion related works
• Liaise and coordinate with clients, consultants and sub-contractors on project coordination
• Liaise with utility agencies e.g. SPPG, telco & etc
• Supervising and managing utility site related site construction, installations, testing and commissioning activities
• Prepare documentation (method statements, risk assessments, safe work procedures) for timely submission and review

Requirements

• Equipped with knowledge of NCE application
• Minimum 5 years of engineering experience and 2 years’ relevant experiences utility works
• Candidate with Register Earthwork Supervisor Certificate is preferred

A. Main Responsibilities

1.

Set up safety and Environmental standards and procedures for the Group Companies & when necessary, revise or modify such procedures to improve safety in the workplace.

2.

Conduct regular site inspections and follow-up actions to ensure safety and environmental compliance.

3.

Implement, train & educate all management, staff, workers & sub-contractors on safety and environmental measures and enforcements.

4.

Assist with incident investigation.

5.

Maintain emergency response plan on environment, health and safety.

6.

Application safety award and Consass audit

7.

Other ad-hoc duties assigned from time to tim

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Job Description & Requirements

• Responsible for the implementation and monitoring of Workplace Safety & Health and Environment Management Systems at work sites.
• Conduct regular WSH inspections and follow-up actions to ensure safety compliance
• Ensure all Health & Safety policies, procedures, rules and regulations are adhered to and are regularly reviewed, updated and communicated.
• Ensure the Company meets its statutory obligations in all areas pertaining to health, safety and welfare at work, including statutory training and reporting
• Ensure the completion and regular review of risk assessments for all work equipments and operations
• Ensure all accidents are documented, investigated and recommended improvements implemented.
• Coordinate the development of health & safety policies, systems of work and procedures.
• Inspect project sites to ensure safety measure are being carried out at all times

Requirements:

• Possess relevant safety certificates (Eg Advanced Certificate in WSH, Safety Officer's Course or equivalent)
• Minimum 3 years of relevant working experience in Building Construction
• Familiar with ISO45001, ISO 9001 & ISO 14001

Job Description:

• Plans; organize, and sets up the site and sequential job planning for smooth execution of projects to achieve cost, quality, timelines, and customer satisfaction objectives;
• Handle project schedules and technical matters.
• Able to work with subcontractors/ suppliers and ensure their works are within the schedule.
• Liaise with the project team, site staff and contractors to conduct regular site meetings and inspections for project progress updates and monitoring of quality.
• Liaise with the relevant authorities to meet permits and licensing requirements.
• Manage site progress and timely delivery of the project.
• Manage cost control and project quality compliance.
• Ensure that Work Safety and Health practices are duly carried out.
• Any other ad hoc duties assigned.

Job Requirements:

• Degree in Civil or Structural Engineering, Building / Construction Management, or any other discipline related to Building Construction.
• At least 5 years experience in the building construction field. Preferably with experience in public and private projects.
• Good technical knowledge and interpersonal skills.
• Strong in persuasion, service-oriented client relationships and people management.
• Good working attitude, self-motivated and able to work independently.
• Please include projects handled for our reference.

Job Description

· Responsible to perform his/her work in accordance to the relevant HSSE regulations and other requirements

· Responsible to comply and adhere with CES_SDC's HSSE Management System requirements

· Responsible to adopt and use the relevant records in the HSSE Management System to conduct checks / inspections, carry out proper record keeping, and submit such records to the CES_SDC's HSSE personnel where required

· Responsible to adhere to the instructions from CES_SDC's HSSE personnel with regards to compliance of HSSE requirements

· Responsible to adhere to the CES_SDC's Policies, HSSE Rules & Regulations, HSSE Risk and Impact Assessment (HSSERIA), Safe Work Procedure (SWP), HSSE Instructions, security instructions, etc

· Responsible to read and understand the HSSERIA, SWP and any other required HSSE documentation for the work operation

· Responsible to discharge his duties in accordance to the Code of Practice for Environmental Control Officer

· Responsible to prepare and submit the Site Environmental Control Programme according to the format required by National Environmental Agency to the workplace's/ project's Manager in-charge for approval

· Responsible to prepare and submit the bi-weekly Site Environmental Control Report according to the format required by National Environmental Agency to the workplace’s/ project’s Manager in-charge for approval

· Responsibilities and duties of the ECO shall emphasize on the following main areas of concern:

1. Elimination of disease-bearing insects and rodents
2. Ensuring proper disposal of construction waste/ marine clay
3. Eliminating noise, air and water pollution
4. Eliminating earth littering
5. Preventing siltation of drains

· Provision of proper maintenance of septic tank(s)/ holding tank(s), chemical/ portable toilet(s) and other sanitary facilities

· Any other environmental health matters

· Responsible to inspect the workplace/ project to ensure all facilities and equipment relevant to the maintenance of environmental health are in proper working condition and do not pose any environmental health hazard

· Responsible to attend to all feedback on such irregularities and inform the Manager in-charge of such irregularities accordingly

· Responsible to organise campaigns, training courses and other activities with regards to environmental to organise campaigns, training courses and other activities with regards to environmental control

· Other Ad-hoc duties as assigned.

Job Experience

· Registered ECO cum ECMO with minimum 5 years of working experience in a construction firm, preferably experience in LTA /PUB project/HDB/MPA requirement

· Possess Earth Control Measure Officer (ECMO) qualification

· Be dynamic, self-motivated, proactive, and results-oriented

· Excellent team spirit, strong technical competence and good interpersonal skills

· Minimum Diploma, Advanced/Higher/Graduate Diploma/Degree in Safety, Health and Environment

FERRY WORKERS TO SITE

TRANSFER THINGS IN LORRY FROM ONE SITE TO ANOTHER

DISPOSE WASTE FROM SITE. WORKERS WILL LOAD AND UNLOAD AND THE CANDIDATE JUST DRIVES ALONE

PURCHASE HAND TOOLS, PPE, DRILL BITS ETC AND PASS TO SITE

Key Responsibilities

Cost Estimation and Budgeting

Prepare initial cost estimates and feasibility studies.

Develop and maintain detailed project budgets.

Conduct value engineering to optimize costs without compromising quality.

Tendering and Procurement

Draft tender documents, including Bills of Quantities (BoQ).

Evaluate contractor bids and recommend the best options.

Negotiate contracts with suppliers, subcontractors, and service providers.

Cost Control and Monitoring

Monitor and manage project expenditures to ensure adherence to budgets.

Conduct interim valuations and process contractor payments.

Identify cost variances and recommend corrective actions.

Contract Administration

Draft, review, and manage construction contracts.

Resolve disputes and manage claims effectively.

Ensure compliance with legal, regulatory, and contractual obligations.

Final Accounts and Reporting

Measure and value work done for final accounts.

Prepare detailed project financial reports.

Present cost analyses and forecasts to stakeholders.

Risk and Change Management

Assess and manage financial risks associated with project changes.

Provide advice on cost implications of design and scope changes.

Requirements

• Bachelor’s degree in Quantity Surveying, Construction Management, Civil Engineering, or a related field.
• 2–5+ years of experience in a similar role (depending on seniority)
• Proficiency in cost estimating and measurement tools (e.g., CostX, PlanSwift, or similar).
• In-depth knowledge of construction methods, materials, and regulations.
• Excellent negotiation and communication abilities.
• Strong problem-solving and decision-making skills.
• Responsible, positive work attitude and good leadership skills

• To maintain safety & health in accordance with WSH Act and WSH legislative requirements
• Responsible for administration of safety & health records accordingly to the company’s accreditation such as ISO, OSHAS & BizSafe requirements and preparation for audits
• Responsible for implementation and administration of site Safety & Health Management System (SHMS), identification of WSH Hazards, implementation of control measures, conduct Safety inspection and Safety committee meetings, update and reviewing of changes
• To provide technical and professional safety assistance to the site construction management
• To brief Project Manager / Project Team regularly on the execution status of the overall EHS program
• To conduct daily EHS toolbox meeting, prepare and maintain PTW records
• Promptly correct any unsafe condition or practice
• To conduct accident/incident investigations and preparation of investigation reports, including the effective closures of all corrective/preventive actions
• Recommend Stop Work Order to Project Manager when unsafe conditions arise including to promptly correcting any unsafe conditions or safe work practice
• Identify environmental health irregularities and recommend measures to rectify such irregularities
• Inspect site to ensure all facilities and equipment relevant to the maintenance of environmental health are in proper working condition and do not pose any environmental health hazard
• Participate as a risk management team member in the site RM organization
• Participate in risk assessment activities for site
• Any other duties as may be assigned.

Job Requirements:

• Candidate must possess Advance Certificate in Workplace Safety & Health, Risk Management and First Aid certified.

Job description:

• Assist Project Manager and site team with handling purchase orders and clerical duties such as email correspondence, phone enquiries
• Perform admin duties for on site personnel and ensure proper documentation of any necessary site records
• Any other ad-hoc duties as instructed by superiors

Job requirements:

• Proficient in basic software such as MS Office
• Strong public relations skills

• Assists in planning, organizing and carrying out project management activities to ensure that assigned projects are executed in a smooth and effective manner to achieve and exceed the cost, quality, timelines and customer satisfaction objectives;
• Assists to ensure that safety procedures are incorporated in all project management activities and takes initiatives to promote a safety working culture;
• Understands contract documentation in conjunction with B.Q. and material specifications;
• Assists in planning for site mobilization and work sequential execution;
• Assists in preparing works schedules and master programs;
• Assists in monitoring project cost budgets and ensuring that desired profit margins are achieved through cost containment, material wastage control, etc;
• Assists in ensuring project performance through close supervision, site checks, close monitoring of site progress and swift resolution of any quality and work schedule issues;
• Assists in ensuring that shop drawings are completed and submissions to the authorities are carried out in a timely manner with Drafting Department;
• Assists in conducting daily meetings with project team members and ensuring that latest changes are communicated to all project staff;
• Attends project kick-off meetings, ongoing meetings and project closure meetings with clients, consultants and other parties;
• Assists in conducting Mass Tool Box meeting with Safety personnel;
• Assists in tracking project performance closely to ensure that projects perform according to agreed schedule, quality and costs;
• Assists in ensuring effective compliance of contractual terms and the full and final settlement of project accounts;
• Assists in updating project development performance in monthly management meetings;
• Assists in ensuring that risk management is taken into account in all project management activities;
• Liaises with suppliers and sub-contractors on contractual matters;
• Assists in responding to consultants’ and requests from others in a pro-active and timely manner;
• Assists in the supervision and motivation of project team members and in promoting teamwork;
• Assists in the deployment of resources and maintenance of duty rosters;
• Liaises with relevant stakeholders effectively to execute the projects in a seamless manner and mitigates any issues that arise;
• Assists in ensuring the execution of projects in accordance with established procedures;
• Assists in ensuring that progress and other reports are prepared in a timely manner as required;
• Assists in project documentation including email communication;
• Assists in verifying sub-contractor claims and material orders with Quantity Surveyors;
• Any other duties as may be assigned.

• Plan, organize and carried out project management activities to ensure that assigned projects are executed in a smooth and effective manner to achieve and exceed the cost, quality, timelines and customer satisfaction objectives;
• Ensure that safety procedures are incorporated in all project management activities and takes initiatives to promote a safety working culture;
• Review contract documentation in conjunction with B.Q. and material specifications;
• Manage the profit and loss of the project;
• Plan for site mobilization and work sequential execution;
• Prepare works schedules and master programs; Ensures that progress and other reports are put up in a timely manner as required;
• Monitor project cost budgets and ensures that desired profit margins are achieved through cost containment, material wastage control, etc;
• Ensure project performance through close supervision, site checks, close monitoring of site progress and swift resolution of any quality and work schedule issues;
• Ensure that shop drawings are completed and submissions to the authorities are carried out in a timely manner with Drafting Department;
• Attend/Chair project kick-off meetings, daily meetings and project closure meetings with clients, consultants and other parties;
• Update and summarizes all project development performance in monthly management meetings;
• Liaise with suppliers and sub-contractors on contractual matters;
• Ensures timely response to consultants’ and all other requests in a pro-active and timely manner;
• Provides effective leadership to team members through coaching, mentoring and motivating on an ongoing basis and ensuring that good team work and esprit-de-corps exist in the Project team;
• Ensures that all project documentation are maintained effectively including email communication;
• Sets key performance indicators for project team members, tracking, monitoring and assessing their performance on an ongoing basis;
• Any other duties as may be assigned.

Job Description

Receptionist Duties:

• Maintain proper record of incoming and outgoing mails
• Manage visitor logbooks
• Greet visitors, clients, and employees with a professional and friendly demeanor.
• Answer and direct incoming phone calls, emails, and queries promptly and accurately.
• Maintain a clean and welcoming reception area.
• Schedule and coordinate appointments, meetings, and meeting room bookings.

Administrative Duties:

• Handle data entry, filing, and document management, document transmittal form
• Keep track on birthday celebrations and send personalised email
• Manage office supplies inventory and place orders when necessary.
• Support HR activities, such as maintaining employee records and coordinating onboarding activities.
• Handle staff house check in and check out records and dormitory agreement.
• Arrange of cleaner’s schedule and ensure cleaner perform his duties.
• Ensure compliance with office procedures and company policies.
• Liaise with vendors and service providers for maintenance or repairs of our building
• Arrange with Logistics department for drivers to run errands
• Issuance of company items (pen, jacket, organiser etc)
• Other Ad-Hoc Duties.

Requirements

• Proficient in Microsoft Office and Microsoft Outlook email client
• Meticulous, Fast Learner, Initativeness, responsible, Strong organizational and time management skills.
• Customer service-oriented with a friendly and professional attitude.
• At least Diploma/Degree in Business administration or equivalent
• At least 2 years of experience in the related field is required for this position.

Job Description:

• Understand and effectively implement the organization’s SHMS at site
• Plan, organize and manage HSE promotional activities within the site to cultivate good HSE practices;
• Provide reasonably practicable and effective HSE recommendations to team members to ensure compliance to legal and other requirements;
• Motivate, coach and counsel on HSE matter to site workforce on an on-going basis with particular regard for recalcitrant personnel;
• Co-ordinate the work of team members, allocate tasks and provide effective supervision;
• Lead the risk assessment team at site;
• Participate as a risk management team member in the corporate RM organization;
• Brief project manager/ project team periodically on the execution status of the overall safety program;
• Carry out safety orientations and to conduct daily safety toolbox meeting (if required);
• Conduct monthly HSE Committee meeting with SWC and Subcontractors;
• Review existing safety measures and recommend safety measures for upcoming works during the safety committee meeting;
• Recommend Stop Work Order to Project Manager when unsafe conditions arise including to promptly correcting any unsafe conditions or safe work practice;
• Attend client/consultant safety meeting/ weekly coordination & technical meeting;
• Lead investigation and maintain records for every first aid case, accident and near miss at the work site;
• Conduct emergency drills periodically
• Inspect site to ensure all facilities and equipment relevant to the maintenance of environmental health are in proper working condition and do not pose any environmental health hazard;
• Identify and discuss environmental health irregularities such as mosquito and fly breeding, rodent infestation, noise / dust / smoke / water pollution, poor housekeeping, earth littering, poor refuse management, poor maintenance of sanitary facilities, etc. and recommend measures to rectify such irregularities;
• Any other duties as may be assigned

Job Requirements:

• Candidate must possess Specialist Diploma in Workplace Safety & Health, Risk Management Level 2 and First Aid certified.
• 5 years practicing as a WSH Coordinator
• At least 1 year post registration of Workplace Safety and Health Officers with the Ministry of Manpower
• Responsible and with good attitude personnel.
• Willing to work under minimum supervision
• Well verse in MS Words and in MS Excel
• Experience in Civil / A&A construction projects

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 3 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

We are looking for a qualified Carpenter to cut, fabricate, and install wooden and other structures according to specifications. Your job will entail working in diverse settings to produce steady and functional infrastructure and products.

Responsibilities:

• Read blueprints, drawings, and sketches to grasp requirements fully
• Take measurements and calculate the size and amount of material needed
• Cut, shape, and smooth lumber and other material (e.g. fiberglass) according to measurements
• Build window frames, doors, staircases and frame buildings by using raw materials or pre-constructed items
• Lay out floorings, roofings or drywalls ensuring they are leveled and compatible
• Carve and assemble furniture, cabinets, shelves and other items and install them where designated
• Inspect places and conduct repairs or maintenance
• Build scaffolding and other construction structures

Requirements and skills

• Proven experience as carpenter
• Hands-on experience in working with carpentry materials
• Excellent understanding of carpentry techniques and methods of installation and construction
• Proficient in using electrical and manual equipment and measurement tools (powered saws, hammers, rulers etc.)
• Ability to read technical documents and drawings
• Willingness to follow safety guidelines at all times
• Good physical condition and endurance
• Must Need to Work Night Jobs, Sundays, and public holidays
• Depend on our customer requirments must need to work odd timeings