Responsibilities:

• Supervise that the ship is built according to specifications and approved plans
• Supervise that the ship is built for compliance with relevant IMO regulations, Rules and Regulations for the Classification and Regulations flag country
• Review technical and building specifications and plans for shipbuilding
• Quickly identify the cause of troubles that occurred during shipbuilding and establish proper solutions
• Take precautions to prevent troubles during shipbuilding
• Liaise and coordinate with various stakeholders, shipyard, designer, vendors, Classification society, and flag country for technical and procedural issues during shipbuilding
• Ensure quality, environment, health & safety requirements are met

Requirements:

• Master's degree in Naval Architecture and Ocean Engineering
• Minimum fifteen(15) years of experience in either of four(4) major IACS Classification Society, ABS, Class NK, DNV or LR
• Proficiency in plan approval for hull structure in new construction projects of merchant ships the length of which is more than 200 metres (more than ten(10) different designs)
• Experience in plan approval for Zero-emission related works, such as; Carbon Capture and Storage system and Alternative fuel
• Experience in design review for novel design of hull structures, such as; Unusual hull form, proportion and structural arrangement
• Experience in structural strength assessment for sloshing in large tanks, such as; Cargo tanks (GTT MK III membrane system) of LNG tanker
• Experience in management as a member of the leadership team of the Classification Society in any country.
• Good knowledge of Rules and Regulations for Classification of Ship, IMO International conventions and codes etc. with experience in the development and maintenance of the Rules
• Good knowledge of innovative technology in the marine industry, such as; Wind-Assisted Propulsion System
• Positive working attitude and ability to work in a fast-paced environment
• Positive troubleshooting/finding root cause during shipbuilding

Responsibilities:

• Confirm compliance with IMO, classification society (ClassNK) and inspections stipulated by the Japanese government (JG) and comply with technical standards.
• Manage budgets and procure and manage materials and equipment appropriately.
• Safe work planning by setting workplace safety rules and engaging in safety training.
• Thorough control and rapid response in spare parts stock management, repairs, and maintenance.
• To formulate plans, check progress and control quality accurately.
• Facilitate coordination with relevant parties (shipyards, classification society, manufacturers, etc.) to ensure smooth operations. Identifying and resolving problems in the field and proposing improvements to increase efficiency and quality.
• Prepare progress reports and report them to head office.

Requirements:

• Minimum 4 years of experience operating and maintaining working vessels in the owner's capacity.
• Degree in Electrical and or Electronic Engineering
• Experience in working at civil construction sites such as Jetty construction, Dredging, Ground improvement
• Experience in dredging and planning electrical equipment.
• Experience in Dredger salvage operation.
• Experience in dredging works using Grab dredgers.Good knowledge of Electrical circuit diagrams such as Electrical wiring for the assembly-type dredger.
• Good knowledge of Programmable Logic Controllers and programming such as PLC ladder, function block etc.
• Sufficient skills and experience are required in ship-related operations, as well as operational efficiency and troubleshooting skills.
• Well-versed in ship maintenance requirements.
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root cause with the ship's crew on board.
• Positive personality, always willing to communicate and cooperate with shipyard personnel and ship's crew, and able to identify root causes and suggest appropriate countermeasures in resolving problems.

Considering the expansion of projects and their transition to the live stage, we are actively seeking additional suitable candidates.

Job Description:

• In charge of quantity take-off, costing & estimation of Civil Engineering projects
• Involved in tender preparation and participation
• Post award contract administration and cost control
• Preparation of technical details for tender submission
• Overall responsible for putting up payment claims, prepare and verify payment to sub-contractors, ensure all variations to contract are captured, track VOs, seek and compare quotations from sub-contractors, control project cost and general contract administration
• Perform other ad-hoc duties that may be assigned from time to time

Job Requirements:

• Minimum 2 years related QS experience
• Proficiency in MS office and AutoCAD
• Must be meticulous, detailed and conscientious with a positive work attitude
• Able to meet tight scheduled deadlines
• Independent and a good team play

We are seeking a skilled Project Engineer with a background in civil engineering, specifically experienced in Road Infrastructure Works, to oversee and manage various phases of road construction projects, ensuring adherence to specifications, timelines, and quality standards.

Key Responsibilities:

• Develop project plans, including timelines, resource requirements, and budgets.
• Coordinate with stakeholders to ensure project objectives are clearly defined and met.
• Monitor project progress and performance, identifying risks and implementing mitigation strategies.
• Review and interpret engineering designs, drawings, and specifications.
• Ensure compliance with regulatory standards, codes, and safety guidelines.
• Conduct site inspections and quality control checks to verify work meets project requirements.
• Foster a collaborative work environment, promoting communication and problem-solving.
• Prepare progress reports, technical documentation, and project updates.
• Maintain accurate records of project activities, expenditures, and resources.
• Communicate project status, milestones, and issues to clients and stakeholders.
• Address client concerns and inquiries promptly, ensuring high levels of satisfaction.

Requirements:

• Degree in Civil/Structural Engineering recognised by the Professional Engineer Board, Singapore, or qualification acceptable to the Commissioner of Building Control Proven experience in managing road infrastructure projects, ideally within LTA or similar agencies.
• Strong understanding of civil engineering principles, construction methodologies, and project management techniques.
• Effective communication skills, both verbal and written, with the ability to liaise confidently with clients and stakeholders.
• Prefer experience with large-scale infrastructure projects involving roads, highways, or transportation

The remuneration package shall be commensurate with relevant project experiences, proven track records and professional skills.

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard.
• Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels and establish a proper restore/repair plan. Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations.
• Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality, environment, health & safety requirements are met.

Requirements:

• Minimum 8 years of engineering experience with a degree in Electronic and Control Systems Engineering or a recognised degree in the relevant field subject to the acceptance of the engineer.
• Experience in planning Electrical systems.
• Experience in designing (Initial/Basic/Detailed) the Electrical part of vessels.
• Experience in development of process simulation for LNG Dual-Fuel vessel's Fuel Gas Supply System (FGSS)
• Good knowledge of ships in Electrical (both power and instrument) system and equipment, Machinery system and equipment, Alternative fuel (LNG, Methanol, etc.) systems, equipment and deep insight into trends in the maritime industry
• Well-versed in ship designing and maintenance requirements.
• Good written and interpersonal skills
• Positive working attitude and ability to work in a fast-paced environment.

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard.
• Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Ship building Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles that occurred to the working vessels and establish a proper restore/repair plan.
• Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations. Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality, environment, health & safety requirements are met.

Requirements:

• Master’s degree in mechanical or shipbuilding engineering.
• Minimum 10 years of experience in mechanical or shipbuilding engineering.
• Minimum 2 years of experience as a project manager in new shipbuilding development.
• Minimum 1 power cable laying vessel construction supervision experience.
• Minimum 1 LNG dual-fuel or methanol dual-fuel vessel with basic design experience.
• Minimum 2 years of experience working in a Japanese engineering team.
• Experience in detailed design of hull piping.
• Able to use CAD and to draw a piping diagram on its own.

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard. Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery. Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels and establish a proper restore/repair plan. Take precautions to prevent troubles on working vessels.
• Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel masters shipyard and vendors to schedule repairs and maintenance needed for the operations. Prepare proposals for docking requirements and specifications. Check and Ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality, environment, health & safety requirements are met.

Requirements:

• Minimum 7 years of higher education in mechanical and/or naval engineering.
• Minimum 4 years of experience with designing for installation of special equipment in shipyards.
• Minimum 3 years of experience in considering ship specifications at companies operating work vessels.
• Experience in shipbuilding projects for special vessels that require advanced technical capabilities in Power/Air supply systems, Mechanical alignment, Procurement and overseeing vendors.
• Experience in boarding cable-laying vessels with a cable capacity of 10,000 tons or more.
• Expert knowledge of cable laying equipment installed on cable laying vessels.
• Expert knowledge of cable laying work using cable laying vessels.
• Good knowledge of Working class ROV and Trencher.
• Good knowledge of marine engineering, structural mechanics, ship design and mechanical design.
• Good written and interpersonal skills.
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root causes with shipyard engineers and workers during the project period

Responsibilities:

• Inspect, maintain, and repair electrical systems
• Responsible to calculate electrical usage and voltage
• Perform installation of new electrical systems, wiring, and components on construction site
• Ensure all work complies with regulations, safety standards, and environmental guidelines
• Conduct regular inspections and preventive maintenance to minimize the risk of electrical failures

Requirements:

• Nitec in Electrical and Electronics Engineering or its equivalent
• Minimum 2 years of related working experience
• Knowledge in electrical systems and automation in construction industry
• Strong communication, teamwork, and interpersonal skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R24121656

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description:

• Control and manage resources including labour and machinery on site.
• Conduct regular inspections and assess the work performance done by subcontractors.
• Monitor and manage work progress of subcontractors.
• Manage and resolve technical issues.
• Assist in planning and sequencing of the construction operations according to the Project Quality Plan.
• Attend meeting with consultant.

Job Requirements:

• Recognized Degree in Civil Engineering.
• HDB experience preferred.
• Min 5 years of relevant working experience.
• Good computer literacy.
• Self-motivated and able to work independently.

The Civil Engineer is responsible for supervising structural projects. They ensure each project is feasible by analyzing local and environmental impacts and making sure that they can be completed on time within the budget restrictions. Other duties and responsibilities may include:

• Considering budget, regulations and environmental hazards during risk-analysis stage
• Preparing material, equipment and labor cost estimates and confirming costs are within the budget
• Forecasting design and construction timeline
• Completing and submitting all permit applications to the appropriate agencies and ensuring projects are compliant throughout the design and construction stages
• Overseeing soil testing to establish soil strength and building feasibility

Job Description

· Attend site visits and tender show round

· Propose and design simple yet sustainable landscape designs for specified sites

· Prepare quotes and landscape maintenance reports

· Coordinate work orders with ground crew

· Dealing with complaints from client on site

· Prepare maintenance schedule

· Monitor and recording of site staff attendance

· Handling few projects assigned and coordination

· To be responsible for the administrative and operational for landscape project aspects, including liaise with customers for project requirements and progress

· Facilitate on the job training program for new crew members and provide ongoing training for crew members’ skill development objectives

Requirements

· Degree/Diploma in Horticulture, Arboriculture or other related fields with minimum of 1 yr experience in landscaping industries

· Required language(s): English, Chinese (in order to deal with complaints from Chinese speaking client on site)

· Dynamic and energetic

· Good team player with ability to lead and multi-task

· Committed to work

· Required Skill(s): Microsoft Office

· Excellent interpersonal and communication skills

· Prefer candidates with horticulture or arborist knowledge

· On-the-job training provided

· Entry level candidates with the relevant Polytechnic / WSQ Diploma / Degree are welcomed

Working Hours and Office Location:

· 5.5-day work week

· Office location: Mandai Estate

· Work location: Various Sites

Job Description

• Transporting earthwork from site to site
• Perform daily routine checks and maintain the general cleanliness.
• Drive in a safe manner at all time and adhering to traffic rules & regulations stated in the Road Traffic
• Ad-hoc duties

Requirements:

• Class 4 License
• Proven working experience & good driving record
• Familiar with Singapore route

Responsibilities:

• Assist in project planning, defining scope, and maintaining project schedules.
• Coordinate procurement of materials and equipment, manage vendor relationships.
• Maintain project documentation, contracts, change orders, and reports.
• Act as a point of contact between project managers, subcontractors, and site personnel.
• Monitor construction activities for compliance with specifications and safety standards.
• Promote and enforce safety regulations on the construction site, conduct safety inspections.
• Assist in monitoring project budgets and expenses, identify cost-saving opportunities.
• Manage change orders and their impact on project timelines and budgets.
• Identify potential risks and develop mitigation strategies, maintain contingency plans.

Requirements:

• Bachelor's degree in Construction Management, Civil Engineering, or related field (preferred).
• Proven experience in construction coordination or a related role.
• Class 3 license
• Knowledge of construction processes
• Strong organizational, multitasking, communication, and interpersonal skills.
• Familiarity with construction-related regulations and safety standards.

Other:

• 6 Days work week

To provide workplace safety & health (WSH) enforcement support, ensure safe work procedures are implemented. enforce site safety practices, organize site safety & health awareness program, conduct audit, meeting and reports for relevant parties. maintain the iso standards in ISO140001 and ohsas45001.

• Degree/Diploma in Engineering or equivalent
• Minimum 3 years of experience
• Good communication skills
• Good Interpersonal skills
• Must be ECO certified with NEA
• Must be WSHO certified with MOM

Roles & Responsibilities

• Project specifications, construction drawings and Building Control Act and Regulations.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer and/or Professionsl engineer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering
• Possess a valid RE Certificate

Job Descriptions:

• Supervise the Engineers in project planning and to co-ordinate and oversee all works on the site
• Monitor & co-ordinate the works with supervisors
• Handling of technical and engineering problems
• Assist the Project Manager in planning, programming and monitoring of construction works progress
• Liaison with client's representative, relevant authorities and consultants
• Identify and assess any foreseeable risk arising from the workplace or work processes, minimise environmental impact associated with the construction activities
• Take reasonable practical measures to eliminate any foreseeable risk to any person who is at the workplace
• Ensure safe work procedures and environmental control measures are implemented at the work site

Job Requirements:

• Degree in Civil / Structural Engineering or its equivalent
• Preferably Degree be recognized by Board of Engineers
• Min 5 yrs experience in Residential/Industrial/Commercial and/or Institutional projects

Looking for experienced tile setters for both wall and floor tiles.

Experienced in working in HIP projects.

Team player and willingness to learn.

As a sales assistant manager, you will play a crucial role in connecting with clients, understanding their needs, and providing tailored design solutions, and working closely with clients for project end-to-end project management and optimal work execution. You will work closely with the team to create inspiring interiors that reflect our clients’ tastes and lifestyles.

Key Responsibilities

- Engage with clients to assess their renovation needs and preferences.

- Develop design concepts and present them to clients effectively.

- Provide expert advice on materials, finishes, and furnishings.

- Prepare detailed proposals and quotations for projects.

- Collaborate with the design team to ensure a cohesive approach to projects.

- Project Management is optional, you will work with our project manager.

- Maintain strong relationships with clients throughout the project management process.

- Stay updated on industry trends and product knowledge.

- Meet sales targets and contribute to growth.

Qualifications

- Minimum 1 year of experience in interior design, sales, or a related field.

- Strong communication and interpersonal skills.

- Proficiency in English.

- A keen eye for aesthetics and attention to detail.

- Ability to work collaboratively in a fast-paced environment.

- A passion for interior design and a desire to learn and grow.

What We Offer

- A vibrant and supportive work environment.

- Opportunities for professional development and career growth.

- Competitive salary and commission structure.

- Employee discounts on design services and products.

How to Apply

If you are excited about the opportunity to work in a creative environment and help clients achieve their dream spaces, please send your resume and portfolio to <[email protected]> with the subject line "SALES ASSISTANT MANAGER Application."

• MNC Company (A1 Maincon)
• Basic up to $3000 - $5000 + AWS + Variable Bonus
• Location: Central
• Working days: Monday to Friday (Normal working hours)
• Training is provided for those with/without lesser experience

Job Responsibilities:

• Quantity take off / BOQ
• To source quotations for relevant trade works including price comparison and cost analysis;
• Ability to raise tender queries/ design discrepancies timely for clarification;
• Ability to handle tender correspondences and addendum to update changes made to tender documents;
• To assist in compilation of tender submission including tender qualification; and
• Other Ad hoc duties as assigned.

Requirements:

• Possess Diploma/Degree in Quantity Surveying;
• Fresh graduates are welcome to apply as training will be provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG JYA YEE (R23119014)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities

• Plan and executes project assigned, vetting engineering design/drawings
• Ensure that projects are implemented according to technical specifications, stipulated schedule in accordance to the master and detailed work programmedand within the approved project costs
• Coordinate and monitor work progress at construction site including periodical site inspection and attending meetings
• Prepare method statement, RA & SWP
• Assist Construction Manager & Quantity Surveyor in Project Progress Claiming Work – Taking site measurements and quantity takeoff from drawings

Requirements

• Diploma/Degree Civil Engineering or equivalent
• Minimum 3 years of working experience in LTA Project
• Responsible, mature, hands-on, meticulous and committed team player

Other:

• Working Day: 6 days per week

• Supports the technical team and construction team for all design matters.
• Reviews all technical documentation and drawings of the Project works.
• Works closely with the Consultants on the designs and project deliverables to enhance site efficiency and constructability.
• Understands and familiar with Authority approval/clearance of works including URA, BCA, LTA, PUB, etc.
• Manages design approval process and coordinates with the Clients and Consultants in a timely manner to resolve all technical issues.
• Ensures strict compliance of the design in accordance with contractual requirements.
• Ensures the distribution of all the approved and latest drawings and other relevant documents to the relevant parties.
• Prepares shopdrawings with in-house BIM team and obtains approval in advance to site installation dates.
• Raises queries to Client or handles Client’s clarification on technical requirements pertaining to the Project works.
• Prepares and presents design progress status and slides to KTC management, project team and Client as and when required.
• Strong coordination and collaboration with other disciplines (i.e. Architectural, MEP, BIM, etc.) on design to ensure delivery of high quality outcome.
• Supports tender team and prepares technical tender documents as per specifications for bidding of civil and structural engineering projects as and when assigned.
• Attends Technical Meetings, Coordination Meeting, Site Meetings, etc as and when required.

The Architectural Design Manager reports to the Project Manager and Project Director and ensure all architectural works are carried out as per approved architectural drawings and specifications. He/She is to verify all interface details are carried out as per drawing plans.

• Plan, design and supervise the construction of infrastructure.
• Coordinates and integrates engineering elements into unified design for client review and approval.
• Carry out Architectural work scheduling, material requisition, cost control, project supervision, documentation and seeking Client’s approval
• Produces conceptual plans, renderings, and documents.
• Engaged in preparing drawings and specification documents for the Conceptual Design Phase, Schematic Design Phase, and/or the Detailed Design Phase of a project.
• Works in tandem with Consultants, Sub-contractors as well as with other technical departments (Structural, M&E Engineers and Quantity Surveyors) on the design intent requirements and raise technical clarifications for smooth progress of work
• To resolve architectural related issues with stakeholders

Requirements:

• Degree in Architectural
• Minimum 10 years of relevant experience in LTA project or Building project.

• To plan, coordinate and execute quality assurance and quality control of project
• To ensure all products are executed in accordance to contract specifications
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• Any other ad-hoc duties as and when assigned

Project Coordinator involves in the day-to-day operations of the projects by organizing and communicating the details related to a specific assignment or task while serving as an interface between team members.

Job Description:

• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such as project scope, time, cost and quality of the project.
• Coordinate and supervise the work activity on site, monitor the daily progress and keep track based on schedule
• Liaise with clients, consultants and main / sub-contractor on project coordination
• Carry out site inspection, analyse and resolve the site problem
• Carry out visual inspection on all installed components of structures
• Ensure the project complies with regulations and clients’ specifications
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• To perform Ad-Hoc duties as per assigned

Our client is a global MNC in real estate and investment management. Due to business needs, they are now recruiting a Property Officer be part of their Facilities Team for ongoing transformation projects.

Duties of Property Officer:

• Assist in day-to-day property maintenance and operational support.
• Oversee preventative maintenance and ensure timely completion of tasks.
• Monitor vendor performance to confirm services meet established KPIs.
• Organize and oversee minor repair and improvement work.
• Obtain quotations and coordinate with contractors for repair tasks.
• Maintain accurate records and standardized systems on-site.
• Be on-call to respond to emergencies and urgent breakdowns.
• Supervise major repair work and assist in annual electrical shutdown events.
• Conduct inspections for building and equipment upkeep.

Requirements:

• Nitec / Diploma in related field
• Relevant experience with Facilities Management / Commercial Building settings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De