Responsibilities

• · Leading Process Design Team for Oil & Gas Projects and guide a team of about 10 Process Design Engineers / Designers to finish the Process design (start from Basic design to Detail Design) of the project.
• · Leading a Team of Process Engineers & Designers in Preparation & Review of PFD, P&IDs, MSD, PSD, Hydraulic calculations, Equipment sizing calculations, BOG calculations, Heat Loss calculations, Tank Venting calculations, Tank capacity calculations, Heating coil calculations, PSV calculations, Process data sheets for Equipment’s such as pumps, compressors, Refrigeration unit, Tanks, Process data sheets for Instruments such as control valves, PSV, PT, TT, LT, Flow meter, Process line list, Heat & Material Balance, HAZOP & SIL Study, Operation Manual, Process control Narrative, Cause & Effect Diagram, Surge Analysis.
• · Review & Checking of Process Documents such as PFD, MSD, P&IDs, Hydraulic Calculations, Process Data Sheets, Surge Analysis, Design Calculations etc to ensure that all the Process documents comply to applicable Codes & Standards and Project Requirements
• · Review & Checking of Surge Analysis report using Pipenet Transient Module for product loading/unloading operation, fire water network systems etc.
• · Review & checking of various process philosophies like Process Control Philosophy, Operation Philosophy, Cause and Effect diagram, Flare and blowdown philosophy, isolation philosophy, Vent & Drain philosophy, shutdown philosophy.
• · Participation in Design Review, HAZOP Study, SIL Study, HAZID Study, ALARP, Bow Tie, MAHM, RAM Study, Alarm Rationalization workshop, SIMOPS, Constructability review carried out during various stages of project.
• · Review Hazop Report, SIL Assessment & Verification Report & Responsible for Closure of all Hazop & SIL Study Recommendation
• · Preparation & Implementation of checklist for all Process Documents
• · Management of Process Discipline Engineers Team for development of Process Design of Major Projects from feasibility studies through Conceptual Design to Detail Engineering.
• · Pre-Bid, FEED & Detailed Design documents review.
• · Maintain Design integrity and quality within the Process Engineering Team.
• · In-house Engineering Activities and Process Engineering Man Hours Estimation and Schedule.
• · Preparation, Monitoring and Control of Process Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Responsible for Process Engineering Execution Methods and Procedure, Process Engineering Disciplines Co-ordination, Process Engineering Deliverables delivery for Project Execution, Process Man-hours Monitoring, Attending design review Meetings with Clients and Package vendors, PSSR+HAZOP+SIL study.
• · Inter Discipline Review of other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc for consistency, quality and Design Integrity.
• · Review of Authority submission documents like Fire Fighting Calculations (Fire & Foam network hydraulic and Surge Analysis, Fire Fighting Design Philosophy).
• · Development & Review of automated excel spreadsheets for process calculations.
• · Preparation, Monitoring and Control of Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Review and ensure that all Process works are carried out in accordance with project specification. Maintain Design integrity and quality within the Process Engineering Team.
• · Preparing Process Engineering schedule and Process Engineering Man hours estimation to meet project requirements.
• · Co-ordinate with other Discipline for Process Inputs and ensure seamless Inter Discipline co-ordination between Process and other Discipline.
• · Job assignments, Mentoring and Supervision of works for Process Designers and Design Engineers.
• · Technical assistance to construction activities and attending to Site Queries.
• · Reviewing Vendor Drawings for Equipment’s and Instruments in terms of Process.
• · FEED & Pre-Bid works which involves Feasibility study.
• · Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness, and correctness in works.
• · Implement HSE objectives, policy, and company HSE procedures within his authority limit.
• · To integrate Risk-based thinking and HSE considerations into business decisions, plans and operations with the commitment to eliminate and reduce HSE hazards, aspects and risks.
• · To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• · To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects, and risks.

Requirements

• · Preferably Bachelor’s Degree in Chemical Engineering
• · Preferably to 15 years in Oil & Gas industry

Software Requirements

• · Proficient in Pipenet, Hysis, MS Excel, MS Word

Code Knowledge

• · API 2000, API 520, API 521, API 526, API 2350
• · SS 532
• · NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Responsibilities:

• Make orders for construction materials and other items as requested.
• Ensure timely delivery of orders.
• Ensure all delivery orders are in accordance to PO and verification of DO for preparation of payment.
• Call for quotations and source for new supplies if need and recommendation of award.
• Work closely with site team for material purchases.
• Process and generate PO/RO
• All other tasks assigned
  
  Requirements:
• GCE O/A Levels or Diploma qualifications.
• Prior experience in working in construction industry is preferred.
• At least 3 years of relevant working experience.
• Proficient in Microsoft Office.

A Senior Contract Manager plays a crucial role in overseeing contract-related functions, ensuring compliance, and managing risks. A Senior Contract Manager also collaborates with project managers and financial controllers to align contract objectives with project and company goals. This role requires strong analytical, negotiation, and leadership skills to navigate complex construction contracts effectively.

Job Responsibilities

• Draft, review, and negotiate contracts with clients, subcontractors, and suppliers, ensuring alignment with project requirements and company policies.
• Identify and mitigate risks in contract terms, providing guidance on contract clauses, obligations, and liabilities.
• Assess contractual risks and implement mitigation strategies.
• Ensure compliance with legal and regulatory requirements, staying updated on construction and contract law changes.
• Manage the full contract lifecycle, from initiation through project completion and closeout.
• Monitor contract performance, ensuring deliverables meet quality, cost, and timeline expectations.
• Handle variations, claims, and changes, assessing their impact on contracts and project scope.
• Ensure contract budgets align with project financial targets, monitoring expenses, and revenue.
• Approve and process payments to contractors and subcontractors, ensuring accurate billing and invoicing.
• Act as the primary liaison between project teams, clients, subcontractors, and suppliers regarding contract matters.
• Provide clear communication on contract requirements, modifications, and potential issues to relevant stakeholders.
• Address conflicts and disputes that may arise during project execution, coordinating with legal teams as needed.
• Ensure all parties fulfill their contractual obligations, conducting regular audits of contract compliance.
• Supervise and mentor junior contract managers, providing guidance on complex contract issues.
• Lead training sessions on contract management best practices, risk mitigation, and compliance for the team.

Job Requirements

• Bachelor's degree in Construction Management, Quantity Surveying, or equivalent
• Minimum 10 years of experience in a comparable role, specializing in contract management and administration, particularly in the construction industry
• Profound knowledge in Contract Negotiation and Administration
• Relevant experience in both Singapore's public and private sector projects
• Relevant experience in handling subcontracts
• Knowledgeable, experienced, and well-versed in the application of various Conditions of Building Contracts commonly adopted locally

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Roles & Responsibilities

• Provide technical advice and support for daily operational issues.
• Perform inspections of welding, structural fabrication, and piping systems to ensure compliance with industry standards.
• Review piping isometric drawings and verify that materials meet specifications.
• Coordinate and oversee NDT activities, including radiographic testing (RT), and ensure accurate results through proper witnessing and review.
• Conduct thorough inspections and assessments during plant shutdowns, documenting findings and reporting discrepancies.
• Assist in the development and implementation of quality control procedures.
• Participate in safety meetings and ensure compliance with health and safety regulations.
• Maintain accurate and organized records of inspections, reports, and certifications.
• Collaborate with engineering and construction teams to ensure design specifications are met.

Qualifications:

• Minimum of 3 years of experience in plant inspections or related fields, especially during shutdowns.
• Valid certification in at least one API area (API 510, API 570, or API 653).
• Knowledge and experience in welding inspection, structural fabrication, and piping materials.
• Proficient in MS Office and CAD/CAM software.
• Familiarity with industry standards and codes (e.g., ASME, ASTM).
• Experience with non-destructive testing methods (UT, PT, MT, VT) is a plus.
• Strong communication skills, both written and verbal, for effective collaboration with team members and clients.
• Ability to work in a fast-paced environment and manage multiple priorities.

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

We're Hiring: Project Coordinator for Renovation Projects

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 8 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Job Description

• Configure and manage critical systems, including Active Directory (AD), telephony, video conferencing, access points (AP), firewalls, VPNs, and more. Monitor and analyse the performance of LANs, WANs, and wireless networks to ensure optimal functionality.
• Configure laptops and desktops for new and existing staff, perform system backups, and handle disaster recovery (DR) as needed. Ensure all automatic system backups are in place.
• Apply system patches after hours to maintain system stability and security. Perform routine system checks to ensure continuous operations.
• Work with third-party support vendors to resolve technical issues. Participate in IT auditing and documentation to ensure compliance with company policies.
• Provide IT support for approximately 200 users, managing user accounts and roles within the ERP system. Troubleshoot login issues, assist with basic system navigation, and resolve minor technical problems.
• Monitor ERP system performance, address minor issues, apply updates, and generate routine reports for departments like finance, HR, and inventory. Customize reports based on user requirements.
• Maintain documentation for common IT processes, user guidelines, and troubleshooting procedures. Optionally, assist with creating and launching new business processes within the company.
• Perform routine backups, monitor system security, and follow compliance protocols under the guidance of the IT team.

Requirements

• Diploma or Degree in IT/Computer Science.
• Possess CCNA / Microsoft certification.
• Proven experience in providing technical support in a corporate IT environment.
• Experience with Veeam and Microsoft 365 administration.
• Familiarity with leading wireless vendors’ products (Cisco/Meraki, Aruba/HPE, Ruckus) is advantageous.
• Knowledge of virtualization technologies such as Hyper-V and VMware is a plus.
• Strong communication and administrative skills.
• Ability to manage multiple tasks and prioritize in a fast-paced environment.

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

* To provide mechanical engineering design expertise during the detailed design phase

* Will be involved in all aspects of the mechanical engineering design and installation supervision

* Engineering package development for cogeneration, flue gas treatment, pressurized equipment, pump, fan, piping etc.

* To prepare tender documents, b i d analysis, operating & maintenance procedures, mechanical drawings and piping layout.

* Assist in the assessment of construction costs, maintenance cost, and safety studies.

Key Responsibilities:

• Coordinate and participate in meetings with clients and technical teams to resolve variation orders (VO) and other contractual matters.
• Negotiate pricing with subcontractors for awarded packages, and prepare essential documents, including Letters of Intent (LOI), and Subcontract Agreements, along with contractual review reports.
• Manage variation orders, and issue payment certificates to subcontractors until final account settlement, including applying contra charges where applicable.
• Oversee the preparation of progress claims and provide detailed information to the Project Director/Manager for quantification and variation claims.
• Manage progress claims, update progress payments, and handle variation orders.
• Attend meetings with clients, subcontractors, and the project team to discuss additional work requirements and verify progress claims and payments.
• Drafting correspondence letters related to contract matters.
• Advise the project team on contractual rights, complaint resolution, and VO settlements.
• Conduct cost exercises, summarize bid details, and lead commercial negotiations with suppliers and subcontractors.
• Evaluate tender proposals, clarify terms, and ensure budget alignment.

Job Requirements:

• Possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree in Quantity Surveying, Civil Engineering, or equivalent.
• Minimum of 5 years of relevant experience in the construction or built environment industry.
• Previous experience in pre- and post-contract work for a MNC and international scale projects is advantageous.
• Highly motivated individual with strong confidence, drive, and exceptional interpersonal skills.
• Well-organized and able to perform under pressure.

• Designing, developing and enhancing electro-mechanical systems and mechatronic devices.
• Creating automated systems and the software to control them.
• Conducting research, documenting findings, and presenting reports at meetings.
• Developing design documents for mechanical parts and final products.
• Identifying areas of weakness in the Equipment and making recommendations for improvement.
• Understanding problems or client briefs and developing solutions that satisfy them.
• Selecting the required tools and materials for the process.
• Assisting with recruitment, onboarding, and training of junior Engineers or Apprentices.
• Attending workshops, training sessions, and conferences to network with others and stay on top of field advancements.
• willing to do night shift
• any service requirement from the site must go and attend any time
• Willing to work Night Shift

1. Marketing to get the jobs/projects for company.

2. Arrange to complete the job/project and handover to the clients.

3. Collect the payment from the clients.

4. Overall lookafter the project.

5. Gebiz tender experience more priority.

6. Singapore Seneior Citizen is high priority.

7. Foriener with B.Sc in civil enginering with 5 years Singapore working enperience may apply.

Responsibilities:

• Perform the role of HR Business Partner
• Payroll administration
• Assist in human resource functions and administrative matters
• Maintain proper documentation of employee records and update HRMS accurately and promptly
• Work pass application/renewal/cancellation for foreign employees
• Prepare HR related reports
• Be Involved in staff welfare activities when required
• Undertake other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Human Resource Management / Business Administration
• Minimum 6 years of relevant working experience in HR Administration, preferably in Construction industry
• Knowledge in using Info-Tech system or willing to learn a new HRMS
• Good knowledge in Employment Act and foreign work pass procedures
• Good communication and interpersonal skills
• Mature, sensitive and discreet in dealing with confidential matters
• Proficient in MS Office
• Resourceful, well organized, meticulous and proactive
• Able to work independently with minimum supervision
• Committed to complete tasks and to provide updates in a timely manner
• Able to start work immediately preferred

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Responsibilities:

• Perform Quantity Take-off and understanding of requirements in each tender that meet client’s expectation.
• Evaluate and recommend the award of construction contracts.
• Participate in on-site and consultant meetings, collaborating with clients, architects, and associate consultants for effective project administration.
• Assist the Project Manager in all contractual and costing matters, ensuring compliance with procurement procedures.
• Prepare valuations, pricing, and agreements of contract variations, process claims, and monitor project cash flows.
• Verify subcontractors’/suppliers’ monthly progressive claims, obtain approval, and prepare payment certificates.
• Prepare and submit monthly payment claims to project owner.
• Review and revise contract terms and conditions as necessary.
• Call for quotations, prepare, and compile tender documents.
• Evaluate tender submissions and prepare tender clarification questions.
• Attend tender interviews as required.

Requirements:

• Possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree in Quantity Surveying, Civil Engineering, or equivalent.
• Minimum of 5 years of relevant experience in the construction or built environment industry.
• Previous experience in pre- and post-contract work for HDB BTO projects are preferred.
• Highly motivated individual with strong confidence, drive, and exceptional interpersonal skills.
• Well-organized and able to perform under pressure.

• Develop and implement maintenance schedules for machinery and equipment.
  Ensure all maintenance and repair works adhere to specifications, are completed on schedule, within budget, and accurately documented.
  Liaise internally between operations teams to address machinery breakdowns and operational concerns.Coordinate data collection on auxiliary materials from operations teams and report on a weekly basis.
  Manage receipt, maintenance, and monitoring of machinery parts inventory.
  Collect machinery maintenance repair data and costs for analysis.
• Prepare monthly machinery reports detailing maintenance activities and performance metrics.Undertake additional tasks as required to support operational needs and project requirements.Preferably with at least 3 years of working experience in related field.
• Comfortable working in Workshop environment.
• Those who have experiences in machinery spare parts will have added advantage.
• Resourceful with positive attitude and able to work independently.

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 3 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Job Description

• Liaise with clients to identify and define project requirements
• Coordinate between authorities, management and relevant stakeholders on project implementation
• Liaise/ negotiate with suppliers and sub-contractors
• Carry out sit surveys and submitting proposal for cabling works, project planning, etc.
• Develop or update project plans including information such as objectives, technologies, schedules, costing, and staffing
• Monitor and manage project milestones and deliverables
• Inspection of inventory to ensure working conditions of machines and equipment
• Monitor store inventory, carry out stock take and ensure quality control of project materials
• Ensure project claims are carried out in a timely manner and projects are closed successfully
• Report project status, such as budget, resources, technical issues, customer satisfaction, etc.
• Utilize industry best practice, techniques, and standards throughout the project execution

Requirements

• At least 3 years of experience in telecommunication/ fiber related fields (OSP & ISP)
• Possess at least a diploma in any engineering field
• Possesses a Class 3 driving license
• Able to commit to a 5.5-day work week

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

Job Description

• Perform day-to-day management of all payment cycle activities including preparing payment
• Ensuring that the cash book and petty cash are updated on daily basis, including checking of petty cash reimbursement with supporting documents and travelling claims with proper approval.
• Ensuring all supplier’s invoices are supported by purchase orders and goods receipt notes if any and they are correctly approved, and coded before input into the accounting system.
• Daily accounting duties including AR / AP functions, including preparation of monthly journal vouchers to be reviewed by the Senior Accounts Officer including inputting of all accounting entries to the accounting system
• Attending to Creditors’ enquires
• Support audit-related activities
• Maintain proper filing and documentation of records
• Data entry and assisting with administrative support.

Job Requirement

At least a Diploma in Accounting/Finance or related fields

• No experience required
• Willingness to learn
• Team player
• Good interpersonal skills, able to communicate effectively
• 5.25 work week (5 days work week and "1 Saturday (half-day) every 4 weeks")

Key Responsibilities

• Oversee and coordinate the development of BIM models across various disciplines (architecture, structural, MEP, etc.).
• Ensure the integration of models from different teams and disciplines, ensuring compatibility and alignment with project requirements.
• Facilitate the use of common data environments (CDE) for the management and sharing of BIM data and models.
• Ensure that all team members adhere to project-specific BIM protocols, standards, and workflows.
• Use BIM software (e.g., Navisworks, Revit) to perform clash detection and conflict resolution between models.
• Coordinate the resolution of clashes or conflicts by collaborating with design teams to make necessary adjustments to the models.
• Organize regular coordination meetings to address any model integration or clash issues.
• Ensure that all BIM models are accurate, complete, and up to date, adhering to established quality standards and specifications.
• Conduct regular audits of models to check for consistency, accuracy, and compliance with project requirements.
• Support team members in maintaining the quality of models and data throughout the project lifecycle.
• Provide technical support and training to project teams regarding BIM software, workflows, and best practices.
• Help resolve technical issues related to BIM tools and ensure smooth communication across teams.
• Stay up to date with new BIM tools, technologies, and best practices and share knowledge with the team.
• Prepare and maintain BIM-related documentation, such as BIM execution plans, coordination reports, and model review checklists.
• Generate and distribute regular reports on BIM progress, clash resolutions, and model integration status to project stakeholders.
• Keep track of the project's BIM-related deliverables, ensuring they are completed on time and according to specifications.
• Act as the primary point of contact for all BIM-related matters, facilitating communication between different project teams.
• Attend and participate in project meetings, providing updates on BIM progress and addressing any issues.
• Work closely with project managers, designers, engineers, and contractors to ensure seamless BIM integration across all phases of the project.

Qualifications

• Bachelor’s degree/Diploma in Architecture, Engineering, Construction Management, or a related field.
• Certification in BIM (e.g., Autodesk Certified Professional, Revit certification).
• Minimum of 3 years of experience in BIM coordination or a related role within the architecture, engineering, or construction industry.
• Proven experience with BIM software such as Autodesk Revit, Navisworks, AutoCAD, and BIM 360.
• Experience with clash detection and coordination tools is highly preferred.
• Familiarity with BIM standards, protocols, and the implementation of BIM processes in construction projects.
• Strong understanding of BIM processes and workflows, including model creation, coordination, and integration.
• Proficiency in BIM software (e.g., Autodesk Revit, Navisworks, BIM 360, etc.).
• Ability to manage and coordinate complex projects across multiple teams and disciplines.
• Excellent problem-solving skills and ability to troubleshoot model coordination and technical issues.
• Strong organizational and time-management skills.
• Excellent communication skills, both written and verbal, to interact with internal teams and external stakeholders.
• Attention to detail and a commitment to quality and accuracy in BIM models.

BIM Implementation and Management:

• Oversee and manage the overall implementation of BIM across projects.
• Ensure adherence to established BIM standards, protocols, and best practices.
• Collaborate with project teams to develop project-specific BIM execution plans.
• Establish and manage BIM workflows, model integration, and coordination.
• Implement new BIM technologies and tools to improve project outcomes.

Team Leadership and Collaboration:

• Lead and mentor a team of BIM coordinators and technicians.
• Coordinate with architects, engineers, contractors, and other stakeholders to ensure BIM is integrated effectively into the design and construction processes.
• Facilitate BIM coordination meetings and manage clash detection and resolution.
• Provide BIM-related training and support to staff and project teams.

Project Coordination and Quality Control:

• Ensure accurate, consistent, and high-quality BIM models and data across all stages of the project lifecycle.
• Review and validate BIM models for accuracy, completeness, and compliance with project requirements.
• Manage and monitor BIM-related schedules and deliverables to ensure timely completion.
• Perform quality control checks on BIM data, including clash detection, model validation, and ensuring consistency between disciplines.

Software and System Management:

• Maintain and update BIM software tools and platforms (e.g., Revit, Navisworks, BIM 360, etc.).
• Work with IT teams to ensure BIM software is up-to-date and fully integrated with other project management systems.
• Troubleshoot software-related issues and assist with technical support.

Process Improvement and Innovation:

• Continuously evaluate and improve BIM processes to ensure they align with project requirements and industry standards.
• Research and incorporate new BIM technologies, trends, and innovations into the company's workflows.
• Monitor BIM performance and make recommendations for improvements based on project feedback and outcomes.

Client and Stakeholder Engagement:

• Communicate BIM progress, challenges, and achievements to clients and stakeholders.
• Provide technical support and assistance to external partners, clients, and consultants involved in BIM processes.
• Ensure that all BIM documentation is prepared and delivered according to client specifications.

Qualifications:

• Minimum Bachelor's degree in Architecture, Engineering, Construction Management, or a related field.
• Minimum of 5 years of experience in BIM management or related roles in the architecture, engineering, or construction industry.
• Proven experience leading BIM teams and managing large-scale projects
• Experience with BIM software such as Autodesk Revit, Navisworks, BIM 360, AutoCAD, and other related tools.
• Strong knowledge of BIM standards, protocols, and processes (e.g., ISO 19650, BIM Level 2).
• Excellent project management and organizational skills.
• Strong leadership abilities and experience in team management.
• Proficiency in data management and model coordination.
• Ability to troubleshoot technical issues and provide support to team members.
• Effective communication skills, both written and verbal.
• Knowledge of construction and design workflows, including clash detection, coordination, and integration.