Accounts Executive

Hexacon Construction is seeking an accounts executive immediately.

What’s on offer

This is a permanent role based at Balestier Road.

· SGD 2,600 - $3,700 monthly, depending on experience and qualifications

· 5-day work week

· 14 days annual leave

· 3 months probation

Reporting to the Finance Controller and Senior Accountant, you are responsible for:

· Maintain accounting general ledgers within accounting software and on Excel

· Perform general ledger, bank, supplier statement reconciliation

· Assist in preparing monthly management accounts, quarterly GST Form 5

· Assist with auditor and tax agent queries, providing of relevant information

· Accurate data entry into claims submission, supplier and payment processing

· Other ad-hoc duties

The successful candidate should:

· Degree / diploma in accountancy

· Ideally, 1-3 years of accounting experience. However, fresh degree / diploma graduates are still welcome to apply

· Meticulous, with an eye for detail

· Spoken and written English proficiency

· Candidates with prior experience with IFCA accounting software will have a significant advantage, but not a must

· Live within the Balestier / Toa Payoh / Bishan area

Job description

· Review the safety management system and offer suggestions for enhancement.

· Implement and oversee the ECM Plan as per requirement.

· Collaborate closely to monitor earth control activities at different stages of the project.

· Manage on-site safety audits.

· Investigate incidents/accidents and propose corrective actions to prevent recurrence.

· Ensure staffs adhere to statutory acts, regulations, company safety protocols, and industry codes.

· Demonstrate effective communication abilities to interact with colleagues, clients, and governmental bodies.

· Perform any other ad-hoc duties as assigned.

Requirements

· Diploma in Workplace Safety & Health or equivalent

· Registered WSHO with ECO and ECMO

Job Description

• Lead and guide sub-contractor to achieve quality workmanship
• Handle paperworks , defects issuance and reporting
• Conduct defects investigation and identification

Requirement

• Minimum 4 years in CONQUAS
• Possess at least 2 good industry practices certificates
• Microsoft office knowledge
• Able to communicate with client and consultant

• To develop and submit a Project Interface Plan (PIP) which manages the interface management process throughout the project life cycle.
• To be responsible for the project wide internal and external interface management activities.
• To conduct weekly interface meeting with all stakeholders and interface manager of all contractors (including SC, direct contractors / specialists to be appointed)
• To manage and coordinate with interface manager of all systems to incorporate the finalised interface details into the overall combined services plans /BIM
• To work with BIM coordinator and be responsible for the BIM coordination for development of BIM Model.

Job Requirement

Shall possess an Engineering Degree with at least 10 years of relevant working experience in M&E services coordination OR

A diploma with at least 20 years of relevant working experience in M&E services coordination.

• Project lead experience in actual projects
• Facilitating BIM Coordination meeting
• Planning BIM processes
• BIM Legal and Contractual issues
• Organisation's adoption plan

Job requirement

• BIM quality check
• BIM authoring tool
• BIM design review
• BIM analysis tool
• BIM Coordination tool
• Project workspace
• BCAA specialist diploma

Job description

· Responsible for the planning, management, and coordination of the MEP Subcontractors testing & Commissioning activities.

· Ensure that the required tests and inspections are performed in accordance with the approved plan.

· Follow-up with subcontractors to resolve any deficiencies that are found.

Job requirement

· Minimum of 10 years engineering experiences in construction industry with relevant diploma.

· Minimum of 5 years construction experience for similar size complexity projects & complexity projects.

Job Description:

· Able to install and repair electrical wiring, systems & fixtures in buildings.

· Assist the operations teams with electrical troubleshooting and repairs

· To perform corrective / preventative maintenance on equipment

· Having experience installing and repairing plumbing fixtures

· Ensure that the work area is safe and clean

• Reports directly to QA manager
• Develope Quality Manual
• Conduct in-house quality training
• Lead and guide site staff and contractors to achieve qulaity workmanship
• Conduct preiodic site survelliance with QA Supervisors
• Prepare inspection test plans
• Collate and report non conformanaces
• Attend site consultant/ coordination meetings
• Produce progress reports
• Mininum 4 years experience in related field
• Understands the requirement and criteria of CONQUAS 21; preferbaly with exposure to Quality Marks inspection procedure and preparation
• Conduct defect investigation and identification
• Proficient in Microsoft Office; Excel/ Words/ Powerpoint
• Good command of English
• Selt motivated
• indepentent

Job Description

· Control and manage incoming and outgoing documents

· Responsible for full inventory of documentation & its easy retrieval

· Review and maintain the accuracy of records, updating where necessary to ensure they are up to date.

· Communication with relevant persons who need to submit documents

· Coordinate with project team to ensure compliance of all documentation

Skills / Qualifications

· Candidate must possess at least a Nitec in Business Studies / Engineering preferred

· At least 1 year of relevant experience in a construction company.

· Detail-oriented and organised

· Highly motivated, well organized, resourceful and proactive

· Possess good interpersonal skills with sound written and oral communication skills

Job Description

• Prepare a lifting plans normal and critical lift plans
• Coordinate and Supervisor overall site lifting activities
• Conduct coordination and logistic meeting with subcontractors
• Visual Inspection of Cranes and lifting equipment’s
• Help site team in planning proper lifting equipment for required lifting works

Requirements

• 5 Years and more as Lifting supervisor/coordinator at construction site
• Lifting appointed person certified will be preferred
• Familiar with rigging techniques of construction material

• Conduct feasibility study to develop basic and detailed engineering designs.
• Manage budget and resources to ensure timely project completion.
• Manage project to ensure compliance with legal and safety requirements.
• Motivate team members and develop their skills.
• Oversee workplace safety to ensure work is performed according to workplace safety procedures.
• Minimum 3 years experience in Building Construction works.

• Conduct feasibility study to develop basic and detailed engineering designs.
• Manage budget and resources to ensure timely project completion.
• Manage project to ensure compliance with legal and safety requirements.
• Motivate team members and develop their skills.
• Oversee workplace safety to ensure work is performed according to workplace safety procedures.
• Minimum 3 years experience in Building Construction works.

• System installation (termination) , including testing & commission
• System and device repairs both in-house and in the field service.
• On stand-by service call duty after-office hours including weekends and public holidays, on a roster system
• Conduct User operation & technical trouble- shooting trainings
• Attendance at site meetings
• Submit a daily report of activities of the day with suggestions of possible solutions.

· To assist the Project Manager or Project Engineer in the daily execution of work;

· Inspecting construction sites regularly to identify and eliminate potential safety hazards;

· Enforcing site safety rules to minimize work-related accidents and injuries;

· To supervise the work of sub-contractors and in-house workers;

· To work closely with other site operations staff to meet the project schedule;

· Ensure installation is carried out as per construction drawings;

· To monitor the progress and quality of work being performed by workers;

· Ensure that works are executed within an acceptable standard of workmanship;

· Attend the daily tool-box meeting and convey clear instruction accordingly;

· Understand and ensure compliance with project requirements and scope of work.

• To assist the Project Manager or Project Engineer in the daily execution of work;

• Inspecting construction sites regularly to identify and eliminate potential safety hazards;

• Enforcing site safety rules to minimize work-related accidents and injuries;

• To supervise the work of sub-contractors and in-house workers;

• To work closely with other site operations staff to meet the project schedule;

• Ensure installation is carried out as per construction drawings;

• To monitor the progress and quality of work being performed by workers;

• Ensure that works are executed within an acceptable standard of workmanship;

• Attend the daily tool-box meeting and convey clear instruction accordingly;

• Understand and ensure compliance with project requirements and scope of work.

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues.
• Production and maintaining of drawings from BIM (Revit) model and ensure proper transmission of data to all parties involved.
• Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Transform AutoCAD drawings into 3D drawings.
• Ensure BIM standards and Level of Development (LOD) are followed.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description

• Ensure timely, accurate month-end closing and financial reporting
• Responsible for preparation and closing of monthly and annual financial statements
• Responsible for accounting processes and tasks (i.e.: AP & AR process, GL, account reconciliation, etc.)
• Reponsible for GST returns, PAYG withholding tax, annual tax returns, annual XRBL submission (if any), annual company return (if any)
• Coordinate and liaise with internal parties to support intercompany activities
• Support forecasting and budgeting exercise as per corporate guidelines
• Coordinate and liaise with external parties like external auditors, tax agents, corporate secretarial agents, local tax and government authorities where required
• Support and ensure compliance with all finance filing requirements, tax filing requirement, audits, procedures and forms both statutory and internal
• Assist in new processes and system implementation when required
• Plan and control the company’s cash flow, funding and budget allocation
• Ensuring all accounting systems, practices, controls and procedures are fully compliance with company policy
• Establish effective internal control procedures to improve accounting and reporting systems
• Assist on any ad-hoc tasks required by CFO or supervisor

Job Requirements

• Minimum 3 years of experience in accountancy
• Diploma/Degree in Finance
• Experienced in handling full sets of accounts
• Efficient in Microsoft Excel, Word etc

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

• Creating New Creditor in Oracle systems
• Preparation of Audit Confirmation - Supplier (PO) and Sundry expenses (creditor with PO, salary, transfer fund, GST etc)
• Matching PO/DO/supplier invoice (Oracle system) - Supplier Invoice with PO (checking quantity & initial prices and total)
• Data entries for sundry and ad-hoc invoice & payment
• Preparation of payment voucher in Oracle system - Supplier (PO) and Sundry expenses (creditor with PO, salary, transfer fund, GST etc)
• Ensure all payment offset with debtors invoices (back charges invoices) - Supplier (PO) and Sundry expenses (creditor with PO, salary, transfer fund, GST etc)
• Preparation of online payment and print out the bank advices
• Allocation of AP (contra off-set btw AP and AR invoices (zero payment)) - Supplier (PO) and Sundry expenses (creditor with PO, salary, transfer fund, GST etc)
• Reconciliation of creditor statement - Supplier (PO) and Sundry expenses (creditor with PO, salary, transfer fund, GST etc)
• Manual matching DO with supplier invoice - Concrete & Others Supplier (checking quantity & initial prices and total)
• Adhoc Payment (TT, Cashier Order etc)
• Key in GIRO payment
• Registrar of group fixed asset & site equipment
• Updating & monitoring of fixed asset register & site equipment
• Banking matter (open & update account / loan matter / FD / etc.. )
• Assist on any ad-hoc tasks required by CFO or supervisor

Job Requirements

• Minimum 1 year of experience in relevant field
• Diploma/Bachelor's Degree in Accountancy
• Proficient in Microsoft Office - Word, Excel, SharePoint
• Able to handle full set of accoutnts

Job Description

a) Report to the Project Manager. Responsible for the EHS systems and implementations.

b) The detailed duties and responsibilities includes but not limited to the following:

• Assist and advise the Project Manager on EHS planning for overall project scope and detailed activities.
• Study and fully understand the requirements of company ISO, EHS and sub-contracts agreements.
• Liaise, handle and keep proper records in dealing with all related authorities in complying with their respective requirements.
• Conduct regular site audits to ensure compliance with EHS requirements. He is authorized to take necessary actions including issuance of partial stop work order as he and the Project Manager deem fit.
• Handle all accident and incident reports.
• Work as a team with project team members and sub-contractors to provide a safe working environment.
• Prevention of fines, imposition of demerit points and SWO from the authorities or owners like MOM, NEA and HDB is a key role which is also a key performance measurement of WSHO cum ECO.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Certified NEA, ECO, ECO, ECMO
• At least 3-5 years' on-site experience

Job Description:

• Competent in reading and understanding drawings and perform measurements.
• Competent in preparing Bills of Quantities.
• Competent in understanding tender/contract/document/specifications/terms of contract
• Competent in analysing quotations/prices/rates, build-up rates and perform pricing
• Competent in performing contract administration including but not limiting to valuation of payments and variations claims in accordance to contract requirements
• Competent in performing all tender activities necessary for the procurement of new projects
• Competent in performing any other activities in connection with the businesses of the holding company
• Competent in working independently as well as with a team
• Participate in any activity ancillary to the company's other objectives e.g. charity events
• Competent in completing required obligations within stipulated timings and other constraints

Job Requirements:

• Bachelor's Degree in Quantity Surveying
• Minimum 3 years of working experience, preferably in the construction industry
• Proficient in Microsoft Office Tools

• Accomplishes department objectives by supervising staff and organizing and monitoring work processes.
• Maintains staff by recruiting, selecting, orienting, and training employees and developing personal growth opportunities.
• Accomplishes staff job results by coaching, counseling, and disciplining employees.
• Plans, monitors, and appraises job results.
• Conducts training.
• Implements and enforces systems, policies, and procedures.
• Maintains safe and healthy work environment by establishing and enforcing organization standards and adhering to legal regulations.
• Completes operations by developing schedules, assigning and monitoring work, gathering resources, implementing productivity standards, resolving operations problems, maintaining reference manuals, and implementing new procedures.
• Controls expenses by gathering and submitting budget information, scheduling expenditures, monitoring variances, and implementing corrective actions.
• Provides quality service by enforcing quality and customer service standards.
• Contributes to team effort by accomplishing related results as needed.

Job Description & Requirements

RESPONSIBILITIES:

• To be able to effectively assess risk impact of project activities and issue Safety Stand Down when deemed necessary.
• Dealing with authorities, staffs, client’s representatives, public, neighbours and other interested parties on matters related to safety & health.
• Conduct regular inspection and see to it that person responsible for the NC recorded or raised by interested parties are informed to perform corrective actions with photos evidence of closure.
• Conduct accident / incident investigations and recommendations on corrective actions to prevent recurrence.
• Monitor and evaluate effectiveness of all corrective actions taken
• Ensure reporting of incident comply with legal requirement.
• Responsible for the implementation and monitoring of Environmental Management System of work site
• Conduct regular site inspections and follow-up actions to ensure environment compliance
• Advise Project Manager on site environmental issues and solutions
• Report and recommend on remedial measures on environmental issues
• Prepare and submit a Site Environmental Control Programme to PM
• Organise campaigns, training courses and other activities to develop and sustain the interest of staff and workers in maintaining good environmental health standards in the construction site
• Other ad-hoc duties assigned by the Project Manager

REQUIREMENTS:

• Preferable to have minimum 5 years of experience in building/ civil projects
• Registered Environmental Control Officer (ECO)
• Possess valid registration with Ministry of Manpower
• Possess a level of physical fitness appropriate to the job requirements, keen observation and knowledge of WSH requirements to enforce safety compliance at the workplace
• At least 5 years of experience in a main-contractor company involved in HDB BTO project